vcp6 desktop vcpd610 exam blueprint v1 3
TRANSCRIPT
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 1/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 1
VCP-Desktop Exam testing center exam code: VCPD610 Exam Blueprint Version 1.3
18 January 2014
Disclaimers:
This blueprint is intended to provide information about the objectives covered by this exam, related
resources, and recommended courses. The material contained within this blueprint is not intended to
guarantee that a passing score will be achieved on the exam. VMware recommends that a candidate
thoroughly understands the objectives indicated in this guide and utilizes the resources and courses
recommended in this guide where needed to gain that understanding.
Blueprint Authors:
Jon Hall
Jeff Hall
Joshua Andrews
Contributors:
Ray Dusseault
Al Grandville
Chuck Hirstius
Eric Stine
Tom Thomas
Tommy Walker
Bill Call
Andy Cary
Tom Stephens
Damian Wraa
Andrew Ellwood
Kyle Gleed
VMware Certified Professional – Desktop
Exam Blueprint
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 2/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 2
Contributors (continued):
Brian Watrous
Undeleeb Din
Chris Skinner
Mostafa Khalil
Jonathan McDonald
Daniel de Sao Jose
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 3/33
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 4/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 4
4. VCP-Desktop Path and Courses ........................................................................................................................ 29
4.1 VCP-Desktop Path ....................................................................................................................................... 29
4.2 Course Requirement Options ..................................................................................................................... 30
5. Additional Resources ........................................................................................................................................ 32
5.1 Mock Exam .................................................................................................................................................. 32
5.2 VCP-Desktop Community............................................................................................................................ 33
5.3 Building a vSphere Test Environment ......................................................................................................... 33
1. The Exam
1.1 Purpose of Exam
The VMware Certified Professional – Desktop Exam tests certification candidates on their skills and abilities
implementing, installing, and configuring a VMware Horizon with View™ 6.x environment deployed on a
VMware vSphere 5.x implementation. Successful candidates demonstrate mastery of skills and abilities across
both vSphere and VMware View knowledge domains. Specific skills and abilities can be found in Section 3.
1.2 Number of Questions
The VCP-Desktop Exam consists of 120 questions and a short pre-exam survey consisting of 10 questions.
1.3 Passing Score
The passing score for this exam is 300, using a scaled scoring method. The scale is from 100-500. Scaled
scores are calculated using a mathematical formula that considers a variety of factors, including the number
and type of exam questions included in a specific version of the exam. Because this combination may vary in
different versions of the same examination, scaled scores provide a fair score for each individual based on the
version of the exam taken.
1.4 How Objectives Relate to Questions on the Exam
Objectives summarize what the test is designed to measure. Objectives are developed by Exam Developers
and subject matter experts (SMEs) based on identified tasks that relate to the job of implementing, installing,
and configuring a VMware View environment. Once the initial development process is complete, these
objectives are verified using an external group of individuals in the actual job role. The external survey
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 5/33
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 6/33
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 7/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 7
2. Intended Audience
2.1 Intended Audience
A candidate for the VCP-Desktop certification has a foundation in vSphere implementation and administration.
The candidate possesses typical vSphere skills, including creating and administering virtual machines,
configuring host networking and storage and working with DRS, HA and other cluster-related vSphere
features. The candidate has built upon this foundation with 6-12 months of experience working with VMware
Horizon. The candidate should have experience installing and configuring View, Mirage, and Workspace and
maintaining a Horizon environment. The successful candidate will most likely have additional industry-
recognized general IT certifications or equivalent experience (typically 2-5 years).
3. Objectives covered in the VCP-Desktop Exam
3.1 Introduction
It is recommended that candidates have the knowledge and skills necessary to administer VMware Horizon
and VMware vSphere environments before taking the VCP-Desktop Exam. It is also suggested that the
candidate complete the recommended courses prior to attempting the exam.
3.2 Objectives
Prior to taking this exam, candidates should understand each of the exam objectives. Each objective is listed
below; along with related tools the candidate should have experience with, and related documentation that
contains information relevant to the objective. All objectives may also be referenced in other product
documentation not specifically highlighted below. The candidate should be familiar with all relevant product
documentation or have an equivalent skill set.
Section 1 – Install Horizon View Server Components
Objective 1.1 – Differentiate Horizon View Component Functions and Features
Knowledge
Describe Horizon 6 with View architecture (Composer, Connection, Microsoft RDSH, security
server)
Describe Horizon View protocols
Identify network ports required for Horizon View protocols
Describe VMware ThinApp
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 8/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 8
Describe kiosk mode
Describe persona management options
Describe the Horizon View agent
Differentiate Horizon View client access options
Tools
Horizon View Administration Guide
Horizon View Architecture Planning Guide
Horizon View Administrator
Objective 1.2 – Install Horizon View Composer
Knowledge
Describe Horizon View Composer database and connectivity
Describe Horizon View Composer service and dependencies
Navigate the Horizon View Composer installation wizard
Identify when to install Horizon View Composer in stand-alone mode
Tools
Horizon View Installation Guide
Horizon View Security Guide
Horizon View Administration Guide
Horizon View Architecture Planning Guide
Horizon View Administrator
Objective 1.3 – Install Horizon View Connection Server
Knowledge
Identify required firewall rules
Install Horizon View Connection servers
Differentiate between standard and replica servers
Tools
Horizon View Installation Guide
Horizon View Security Guide
Horizon View Administration Guide
Horizon View Administrator
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 9/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 9
Objective 1.4 – Install Horizon View Security Server
Knowledge
Identify required firewall rules
Configure Horizon View security server pairing Navigate the View Connection server installation wizard
Tools
Horizon View Installation Guide
Horizon View Security Guide
Horizon View Administration Guide
Horizon View Administrator
Horizon View Administrator Objective 1.5 – Prepare Environment for Horizon View
Knowledge
Describe characteristics of required Active Directory domain accounts, groups, and permissions
Identify and describe the Group Policy Object (GPO) template files
Describe Organizational Units (OUs) for machine accounts and kiosk mode client accounts
Verify trust relationships
Describe DHCP requirements for Horizon View desktops
Identify required firewall rules to support Microsoft Remote Desktop Session Host (RDSH)
Navigate the Microsoft Windows Service Manager to administer RDSH
Tools
Horizon View Installation Guide
Horizon View Security Guide
Horizon View Administration Guide
Setting Up Desktop and Application Pools in Horizon View
Horizon View Administrator
Section 2 – Configure a Horizon View Environment
Objective 2.1 –
Configure Horizon View Composer
Knowledge
Identify default View Composer port settings
Identify domain accounts used for QuickPrep
Identify the VMware vCenter™ Server host system
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 10/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 10
Identify necessary account domain permissions and domain trust relationships
Enable View Composer from View Administrator and add domain account(s)
Tools
Horizon View Installation Guide Horizon View Administration Guide
Horizon View Architecture Planning Guide
Horizon View Administrator
Objective 2.2 – Configure Horizon View
Knowledge
Explain the purpose of the Events database
Configure the Events database settings
Configure the Syslog server
Enable Horizon View Storage Accelerator
Enable disk space reclamation
Configure SSL
Configure and modify Horizon View global settings
Configure external URL settings
Configure default roles, custom roles, and required permissions
Configure display protocol settings
Edit Horizon View security server settings
Describe virtual printing services and architecture
Configure location-aware printing
Configure the profile store for Persona management
Configure virtual profile GPOs
Tools
Horizon View Installation Guide
Horizon View Administration Guide
Horizon View Architecture Planning Guide
Horizon View Administrator
Horizon View ADM files
sviconfig.exe
Objective 2.3 – Configure PCoIP/RDP Protocol Settings
Knowledge
Configure HTML access
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 11/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 11
Describe protocol requirements
Locate ADM template files
Explain GPO settings
Configure Flash quality and throttling
Configure 3D rendering capabilities
Tools
Horizon View Administration Guide
Horizon View Architecture Planning Guide
PCoIP Network Optimization Guide
Horizon View Administrator
Horizon View ADM files
Objective 2.4 – Configure and Manage Horizon View Security
Knowledge
Import certificates
Turn on certificate-based authentication
Identify authentication requirements for RSA, Smart Cards, and RADIUS
Configure SAML authenticator
Create Horizon View access groups for delegated administration and roles
Create and assign delegated administrative roles
Configure clipboard redirection
Tools
Horizon View Installation Guide
Horizon View Security Guide
Horizon View Administration Guide
Horizon View Administrator
Objective 2.5 – Integrate VMware ThinApp into a Horizon View Deployment
Knowledge
Create VMware ThinApp applications Create or identify supported file share
Assign permissions to the share
Verify MSI streaming settings in the package.ini files
Identify necessary VMware ThinApp package components to put on the share
Assign VMware ThinApp applications to pools
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 12/33
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 13/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 13
Objective 3.2 – Configure Full Clone Automated Pools
Knowledge
Identify floating vs. dedicated assignments
Identify and configure pool settings Identify and configure 3D renderer
Identify and configure provisioning settings
Identify and configure template
Identify and configure vCenter Server resource settings
Identify and configure guest customization settings
Identify and configure advanced storage settings
Tools
Horizon View Administration Guide
Horizon View Administrator
Objective 3.3 – Configure Manual Pools
Knowledge
Identify and configure pool settings
Identify and configure desktop sources
Tools
Horizon View Administration Guide
Horizon View Administrator
Objective 3.4 – Build and Customize Desktop Images
Knowledge
Perform OS optimizations
Perform installation of View Agent and VMware Tools
Configure virtual machine hardware
Create and manage snapshots Create customization specifications
Tools
Horizon View Administration Guide
Horizon View Installation Guide
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 14/33
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 15/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 15
Troubleshoot permission issues
Tools
Horizon View Administration Guide
Horizon View Installation Guide Horizon View Administrator
Objective 4.3 – Troubleshoot Horizon View Component Connectivity Issues
Knowledge
Troubleshoot Horizon View client connectivity issues
Troubleshoot Horizon View client protocol connectivity issues
Troubleshoot desktop connectivity issues
Generate and analyze log bundles
Tools
Horizon View Administration Guide
Horizon View Installation Guide
Horizon View Administrator
Objective 4.4 – Troubleshoot PCoIP Configuration Issues
Knowledge
Monitor PCoIP session statistics
Troubleshoot performance issues
Troubleshoot packet loss
Optimize visual settings
Tools
Horizon View Administration Guide
Horizon View Architecture Planning Guide
PCoIP Network Optimization Guide
Horizon View Administrator
Horizon View ADM files
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 16/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 16
Section 5 – Install, Configure, and Manage VMware Mirage
Objective 5.1 – Describe and Differentiate VMware Mirage Components
Knowledge
Identify firewall requirements for VMware Mirage
Install VMware Mirage Management server and console
Install VMware Mirage Web Manager
Install VMware Mirage server
Install VMware Mirage Gateway server
Install and Configure File Portal
Configure Branch Reflector
Configure role-based delegations
Configure driver library and profiles
Configure SSL
Configure the User State Migration Tool (USMT) Configure storage volumes
Tools
VMware Mirage Administration Guide
VMware Mirage Installation Guide
VMware Mirage Web Manager Guide
VMware Mirage Management console
Objective 5.2 – Manage Base and Application Layers
Knowledge
Capture and update the Base layer
Capture and update the App layer
Assign Base and App layers
Tools
VMware Mirage Administration Guide
VMware Mirage Management console
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 17/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 17
Objective 5.3 – Configure and Manage Endpoints
Knowledge
Create and manage Upload policies
Restore snapshots Create, manage, and archive collections
Install the Mirage Client
Migrate and centralize endpoints
Tools
VMware Mirage Administration Guide
VMware Mirage Management console
Section 6 –
Install, Configure, and Manage VMware Workspace Portal
Objective 6.1 – Install VMware Workspace Portal
Knowledge
Identify minimum hardware and software requirements
Identify firewall requirements
Understand forward and reverse DNS requirements for VMware Workspace virtual appliances
Create IP pools
Deploy OVA/OVF files
Configure initial installation (console, web) Setup external database
Setup high availability
Tools
VMware Workspace Portal Reviewer’s Guide
Installing and Configuring VMware Workspace Portal
VMware Workspace Portal Administrator’s Guide
vSphere Virtual Machine Administration Guide
VMware Workspace Admin Console
Objective 6.2 – Configure VMware Workspace Portal
Knowledge
Configure high availability
Configure SSL certificates
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 18/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 18
Configure NTP
Configure users and groups
Configure web links and SaaS application authentication
Configure VMware ThinApp access and delivery
Configure approvals
Tools
Installing and Configuring VMware Workspace Portal
VMware Workspace Portal Administrator’s Guide
VMware Workspace Admin Console
Objective 6.3 – Manage VMware Workspace Portal
Knowledge
Define and promote administrators
Package VMware ThinApp applications
Entitle and deploy applications
Enable Horizon View desktop access through VMware Workspace Portal
Configure reporting for usage and entitlement
Deploy and update VMware Workspace Portal clients
Integrate Office365 into VMware Workspace Portal
Tools
Installing and Configuring VMware Workspace Portal VMware Workspace Portal Administrator’s Guide
VMware Workspace Admin Console
Section 7 – Plan, Install, Configure, and Upgrade vCenter Server and ESXi
Objective 7.1 – Identify and Explain vSphere Architecture and Solutions
Knowledge
Identify available vSphere editions and features
Explain ESXi and vCenter Server architectures
Determine appropriate vSphere edition based on customer requirements
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 19/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 19
Tools
vSphere Installation and Setup guide
vCenter Server and Host Management Guide
vSphere Web Client
Objective 7.2 – Install and Configure vCenter Server and ESXi
Knowledge
Identify vCenter Server appliance and database requirements
Identify available vCenter Server editions
Identify SSO requirements
Identify ESXi host requirements
Deploy the vCenter Server appliance
Install vCenter Server into a virtual machine
Create an ODBC Connection to a vCenter Server database Size the vCenter Server database
Install additional vCenter Server components
Install and configure vSphere Client / vSphere Web Client
Administer vSphere Client plug-ins
Configure vCenter Server and ESXi licensing
Perform an interactive installation of ESXi using media or PXE
Configure NTP, DNS and Routing on an ESXi Host
Enable/Disable hyper-threading
Select a CPU power management policy
Enable/Size/Disable memory compression cache
Determine availability requirements for a vCenter Server in a given vSphere implementation
Tools
vSphere Installation and Setup guide
vCenter Server and Host Management Guide
vSphere Web Client
Objective 7.3 – Plan and Perform Upgrades of vCenter Server and ESXi
Knowledge
Identify upgrade requirements for ESXi hosts
Identify steps required to upgrade vCenter Server and ESXi
Upgrade a vSphere Distributed Switch
Upgrade from VMFS3 to VMFS5
Upgrade VMware Tools and virtual machine hardware
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 20/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 20
Upgrade an ESXi Host using vCenter Update Manager
Upgrade vCenter Server components
Stage multiple ESXi Host upgrades
Determine whether an in-place upgrade is appropriate in a given upgrade scenario
Tools
vSphere Installation and Setup guide
vCenter Server and Host Management Guide
vSphere Upgrade Guide
vSphere Web Client
Section 8 – Plan and Configure vSphere Networking
Objective 8.1 – Configure vSphere Standard Switches
Knowledge
Identify vSphere Standard Switch capabilities
Identify common vSphere Standard Switch policies
Create/Delete a vSphere Standard Switch
Add/Configure/Remove vmnics on a vSphere Standard Switch
Configure vmkernel ports for network services
Add/Edit/Remove port groups on a vSphere Standard Switch
Determine use cases for a vSphere Standard Switch
Tools
vCenter Server and Host Management Guide
vSphere Networking Guide
vSphere Web Client
Objective 8.2 – Configure vSphere Distributed Switches
Knowledge
Identify vSphere Distributed Switch capabilities
Identify common vSphere Distributed Switch policies
Create/Delete a vSphere Distributed Switch
Add/Remove ESXi hosts to/from a vSphere Distributed Switch
Edit general vSphere Distributed Switch settings
Add/Configure/Remove dvPort groups
Configure dvPort settings
Add/Remove uplink adapters to dvUplink groups
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 21/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 21
Create/Configure/Remove virtual adapters
Migrate virtual adapters to/from a vSphere Standard Switch
Migrate virtual machines to/from a vSphere Distributed Switch
Monitor dvPort state
Backup / restore vDS configuration
Configure LACP on Uplink Port Groups Determine use cases for a vSphere Distributed Switch
Tools
vCenter Server and Host Management Guide
vSphere Networking Guide
vSphere Web Client
net-dvs
Section 9 –
Plan and Configure vSphere Storage
Objective 9.1 – Configure Shared Storage for vSphere
Knowledge
Identify storage adapters and devices
Identify storage naming conventions
Identify hardware/dependent hardware/software iSCSI initiator requirements
Compare and contrast array thin provisioning and virtual disk thin provisioning
Describe zoning and LUN masking practices
Scan/Rescan storage Configure Fiber Channel/iSCSI LUNs as ESXi boot LUNs
Create an NFS share for use with vSphere
Connect to a NAS device
Enable/Configure/Disable vCenter Server storage filters
Configure/Edit hardware/dependent hardware initiators
Enable/Disable software iSCSI initiator
Configure/Edit software iSCSI initiator settings
Configure iSCSI port binding
Enable/Configure/Disable iSCSI CHAP
Determine use case for hardware/dependent hardware/software iSCSI initiator
Determine use case for and configure array thin provisioning
Tools
vCenter Server and Host Management Guide
vSphere Storage Guide
vSphere Web Client
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 22/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 22
Objective 9.2 – Configure Software Defined Storage
Knowledge
Differentiate VSA and Virtual SAN solutions
Describe Virtual SAN architecture Identify Virtual SAN requirements
Differentiate Virtual SAN licensing options
Identify Virtual SAN Capabilities
Describe Virtual SAN use cases
Create/Delete Virtual SAN cluster
Manage Virtual SAN disk groups
Create Storage Service Classes
Monitor Virtual SAN storage
Add/Remove Virtual SAN Nodes
Tools
vCenter Server and Host Management Guide
vSphere Storage Guide
vSphere Web Client
Objective 9.3 – Create and Configure VMFS and NFS Datastores
Knowledge
Identify VMFS and NFS datastore properties
Identify VMFS5 capabilities
Describe 2TB+ VMFS capabilities
Create/Rename/Delete/Unmount a VMFS datastore
Mount/Unmount an NFS datastore
Extend/Expand VMFS datastores
Place a VMFS datastore in Maintenance Mode
Select the Preferred Path for a VMFS datastore
Disable a path to a VMFS datastore
Determine use case for multiple VMFS/NFS datastores
Determine appropriate Path Selection Policy for a given VMFS datastore
Tools
vCenter Server and Host Management Guide
vSphere Storage Guide
vSphere Web Client
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 23/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 23
Section 10 – Deploy and Administer Virtual Machines
Objective 10.1 – Create and Deploy Virtual Machines
Knowledge
Identify capabilities of virtual machine hardware versions
Identify virtual machine storage resources
Place virtual machines in selected ESXi hosts, Clusters, and Resource Pools
Configure and deploy a Guest Operating System into a new virtual machine
Configure/Modify disk controller for virtual disks
Configure appropriate virtual disk type for a virtual machine
Create/Convert thin/thick provisioned virtual disks
Configure disk shares
Install/Upgrade/Update VMware Tools
Configure virtual machine time synchronization
Convert a physical machine using VMware Converter Import a supported virtual machine source using VMware Converter
Modify virtual hardware settings using VMware Converter
Create/Clone/Export a vApp
Edit vApp settings
Configure IP pools
Suspend/Resume a vApp
Configure/Modify virtual CPU and Memory resources according to Operating System and
application requirements
Configure/Modify virtual NIC adapter and connect virtual machines to appropriate network
resources
Determine appropriate datastore locations for virtual machines based on application workloads Determine when a tiered application should be deployed as a vApp
Tools
vCenter Server and Host Management Guide
vSphere Virtual Machine Administration Guide
vSphere Web Client
Objective 10.2 – Manage Virtual Machine Clones and Templates
Knowledge
Identify cloning and template options
Identify content types
Clone an existing virtual machine
Create a template from an existing virtual machine
Deploy a virtual machine from a template
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 24/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 24
Update existing virtual machine templates
Deploy virtual appliances and/or vApps from an OVF template
Import and/or Export an OVF template
Create a Content Library (VMs, ISOs, Scripts, vApps)
Publish/Subscribe/Share Content Library
Determine the appropriate deployment methodology for a given virtual machine application
Tools
vCenter Server and Host Management Guide
vSphere Virtual Machine Administration Guide
vSphere Web Client
Objective 10.3 – Administer Virtual Machines
Knowledge
Identify snapshot requirements
Identify files used by virtual machines
Identify locations for virtual machine configuration files and virtual disks
Identify common practices for securing virtual machines
Hot Extend a virtual disk
Configure USB device pass-through from an ESXi host
Configure serial port redirection
Configure virtual machine options
Configure virtual machine power settings
Configure virtual machine boot options
Configure virtual machine troubleshooting options
Assign a Storage Policy to a virtual machine
Verify Storage Policy compliance for virtual machines
Determine when an advanced virtual machine parameter is required
Adjust virtual machine resources (shares, limits and reservations) based on virtual machine
workloads
Tools
vCenter Server and Host Management Guide
vSphere Virtual Machine Administration Guide vSphere Web Client
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 25/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 25
Section 11 – Establish and Maintain Service Levels
Objective 11.1 – Create and Configure vSphere Clusters and Resource Pools
Knowledge
Create and Delete a Distributed Resource Scheduler/High Availability cluster
Add/Remove ESXi Hosts and virtual machines to/from a Distributed Resource Scheduler/High
Availability cluster
Configure a Storage Distributed Resource Scheduler cluster
Configure Enhanced vMotion Compatibility
Monitor a Distributed Resource Scheduler/High Availability cluster
Configure migration thresholds and automation levels for Distributed Resource Scheduler and
virtual machines
Enable/Configure/Disable Host and Distributed Power Management
Create affinity rules
Enable/Disable host, virtual machine, and application monitoring Configure admission control for High Availability and virtual machines
Identify VMware Fault Tolerance requirements and limits
Configure and test a Fault Tolerance configuration
Enable/Disable VMware Fault Tolerance on a virtual machine
Determine use case for enabling Fault Tolerance on a virtual machine
Describe the Resource Pool hierarchy
Define the Expandable Reservation parameter
Describe vFlash architecture
Create/Remove a Resource Pool
Configure Resource Pool attributes
Add/Remove virtual machines from a Resource Pool Create/Delete vFlash Resource Pool
Assign vFlash resources to VMDK files
Determine Resource Pool requirements for a given vSphere implementation
Evaluate appropriate shares, reservations and limits for a Resource Pool based on virtual machine
workloads
Tools
vCenter Server and Host Management Guide
vSphere Availability Guide
vSphere Monitoring and Performance Guide vSphere Web Client
esxtop
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 26/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 26
Objective 11.2 – Service ESXi Hosts and Virtual Machines
Knowledge
Identify ESXi host and virtual machine requirements for vMotion and Storage vMotion
Identify Enhanced vMotion Compatibility CPU requirements Identify snapshot requirements for vMotion and Storage vMotion migration
Migrate virtual machines using vMotion and Storage vMotion
Configure virtual machine swap file location
Migrate a powered-off or suspended virtual machine
Utilize advanced Storage vMotion techniques, such as changing virtual disk type, renaming virtual
machines, etc.
Identify patching requirements for ESXi hosts and virtual machines
Create/Edit/Remove a Host Profile from an ESXi host
Import/Export a Host Profile
Attach/Apply a Host Profile to an ESXi host or cluster
Perform compliance scanning and remediation of an ESXi host using Host Profiles Install and Configure vCenter Update Manager
Configure patch download options
Create/Edit/Delete an Update Manager baseline
Attach an Update Manager baseline to an ESXi host or cluster
Scan and remediate ESXi hosts and virtual machines using Update Manager
Stage ESXi host updates
Tools
vCenter Server and Host Management Guide
vSphere Availability Guide vSphere Host Profiles
Installing and Administering VMware vSphere Update Manager
vSphere Web Client
Section 12 – Monitor a vSphere Implementation
Objective 12.1 – Monitor ESXi, vCenter Server, and Virtual Machines
Knowledge
Describe how tasks and events are viewed in vCenter Server
Identify critical performance metrics
Explain common memory metrics
Explain common CPU metrics
Explain common network metrics
Explain common storage metrics
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 27/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 27
Compare and contrast Overview and Advanced Charts
Configure SNMP for vCenter Server
Configure Active Directory and SMTP settings for vCenter Server
Configure vCenter Server logging options
Create a log bundle
Create/Edit/Delete a Scheduled Task Configure/View/Print/Export resource maps
Start/Stop/Verify vCenter Server service status
Start/Stop/Verify ESXi host agent status
Configure vCenter Server timeout settings
Monitor/Administer vCenter Server connections
Create an Advanced Chart
Determine host performance using guest Perfmon
Given performance data, identify the affected vSphere resource
Tools
vCenter Server and Host Management Guide
vSphere Resource Management guide
vSphere Monitoring and Performance guide
vSphere Web Client
Objective 12.2 – Create and Administer vCenter Server Alarms
Knowledge
List vCenter Server default utilization and connectivity alarms
List possible actions for utilization and connectivity alarms
Create a vCenter Server utilization alarm
Create a vCenter Server connectivity alarm
Configure alarm triggers
Configure alarm actions
For a given alarm, identify the affected resource in a vSphere implementation
Tools
vCenter Server and Host Management Guide
vSphere Resource Management guide vSphere Monitoring and Performance guide
vSphere Web Client
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 28/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 28
Objective 12.3 – Install, Configure, and Manage vCenter Operations Manager for View
Knowledge
Differentiate between major and minor vCenter Operations Manager for View badges
Explain vCenter Operations Manager for View architecture Deploy and configure vCenter Operations Manager for View appliance
Install and configure vCenter Operations Manager for View adapter
Monitor vSphere and Horizon View environments
Identify the affected resource in a Horizon View implementation for a given alarm
Tools
vCenter Server and Host Management Guide
vSphere Monitoring and Performance guide
vCenter Operations Manager for Horizon View Installation Guide
vCenter Operations Manager for Horizon View Administration Guide vCenter Operations Manager for View User Interface
vSphere Web Client
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 29/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 29
4. VCP-Desktop Path and Courses
4.1 VCP-Desktop Path
There are two paths to earning your VCP-Desktop certification.
Path 1: Just starting with VMware desktop technology.
Completion of one of the following courses is required .
VMware Horizon (with View): Install, Configure, Manage [V6.0]
Classroom
Live OnlineView Schedule
VMware Mirage [V5.0] and Horizon with View [6.0]: Fast Track Classroom
Live OnlineView Schedule
VMware Horizon View: Install, Configure, Manage [V5.2]
Please note, this course covers a different version of View than theexam.
Classroom
Live Online View Schedule
VMware View: Desktop Fast Track [V5.1]
Please note, this course covers a different version of View than the
exam.
Classroom
Live OnlineView Schedule
Pass the exam and get certified
VMware Certified Professional 6 - Desktop (VCP6-DT) ExamRequest VCPD610
Exam Authorization
Path 2: Already holding a valid VCP level certification
Required Prerequisite: Valid VCP level certification. Completion of one of the following courses is
recommended .
VMware Horizon (with View): Install, Configure, Manage [V6.0]
Classroom
Live OnlineView Schedule
VMware Mirage [V5.0] and Horizon with View [6.0]: Fast Track Classroom
Live OnlineView Schedule
VMware Horizon View: Install, Configure, Manage [V5.2]
Please note, this course covers a different version of View than the
exam.
Classroom
Live OnlineView Schedule
VMware View: Desktop Fast Track [V5.1]
Please note, this course covers a different version of View than the
exam.
Classroom
Live OnlineView Schedule
Pass the exam and get certified
1
2
2
1
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 30/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 30
Path 1: Just starting with VMware desktop technology.
VMware Certified Professional 6 - Desktop (VCP6-DT) ExamRequest VCPD610
Exam Authorization
4.2 Course Requirement Options
In order to obtain the VCP-Desktop certification, a VMware course is required, unless you are an existing VCP
who has already satisfied their course requirements. The following courses will satisfy the requirement:
VMware Mirage [5.0] and Horizon with View [V6.0]: Fast Track
This extended-hours, hands-on training course provides students with skills that they need to deploy a
unified image management system using VMware Mirage™ as well as installing, configuring, and
managing the VMware Horizon™ View™ component of VMware Horizon™.
At the end of the course, you should understand the features and operation of VMware Mirage and
Horizon with View and be able to:
• Describe the key concepts of Mirage
• Recognize how Mirage fits into the VMware end-user computing vision
• Identify the main Mirage use classifications
• Define the function of each of the Mirage solution components
• Install, configure, and upgrade Mirage
• Identify the tasks for SSL configuration on a Mirage system
• Discuss the management functions available in the Mirage Management Console
• Deploy Mirage to endpoints
• Explain the tasks for capturing and assigning base layers and application layers
• Describe methods for performing disaster recovery with Mirage
• Outline how to plan and perform a mass hardware migration with Mirage
• Recognize how the file portal is set up and used
• Identify View components
• Install and configure View Connection Server
• Install and configure virtual machines that become desktops
• Configure and manage VMware Horizon® Client™ systems
• Configure and manage pools of existing physical machines
• Configure and manage automated pools of full virtual machines
• Configure and manage pools of linked-clone machines
• Configure and manage RDS pools of desktops and applications
• Use View Administrator to configure the View environment
• Configure secure access to View desktops
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 31/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 31
• Describe steps to deploy View Persona Management for user profile management
• Manage performance and scalability of a View deployment
VMware Horizon (with View): Install, Configure, Manage [V6.x]
This hands-on training course builds your skills in the VMware® Horizon View™ suite of products:
VMware® Horizon View™ Manager, VMware® Horizon View™ Composer, VMware® Horizon View™
security server, and VMware® ThinApp™.
At the end of the course, you should understand the features and operation of View and be able to:
Install and configure Horizon View components
Install and configure View Connection Server
Install and configure virtual machines that become desktops
Configure and manage VMware Horizon™ Client™ systems
Configure and manage pools of existing physical machines
Configure and manage automated pools of full virtual machines
Configure and manage pools of linked-clone machines
Configure and manage RDS pools of desktops and applications
Use View Administrator to configure the View environment
Configure secure access to View desktops
Describe steps to deploy View Persona Management for user profile management
Manage performance and scalability of a View deployment
This course covers a majority of the objectives on the VCP-Desktop Exam and is recommended for
individuals who want to gain a better understanding of the objectives represented in the exam.
VMware Horizon View: Install, Configure, Manage [V5.x]
This hands-on training course builds your skills in the VMware® Horizon View™ suite of products:
VMware® View™ Manager, VMware® View™ Composer, and VMware® ThinApp™.
At the end of the course, you should understand the features and operation of View and be able to:
Install and configure Horizon View components
Create and manage dedicated and floating desktop pools
Deploy and manage linked-clone virtual desktops
Configure and manage desktops that run in local mode
Configure user profiles with View Persona Management
Configure secure access to desktops through a public network
Use ThinApp to package applications
Entitle applications by using Horizon View
This course covers a majority of the objectives on the VCP-Desktop Exam and is recommended for
individuals who want to gain a better understanding of the objectives represented in the exam.
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 32/33
Copyright ©2014 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 32
VMware View: Desktop Fast Track [V5.x]
This fast-paced, extended-hour training course includes the content of the following courses:
VMware View: Install, Configure, Manage
Application Virtualization with VMware ThinApp
VMware View: Design Best Practices
This hands-on training course builds your skills in the VMware View™ suite of products: VMware View
Manager, VMware View Composer, and VMware® ThinApp™. It will provide applications-oriented
administrators with the knowledge and skills to virtualize Windows applications with ThinApp and to
choose the best deployment and updating processes for their environment. The course will also
present a methodology for analyzing and designing a View solution for the VMware vSphere™
infrastructure.
At the end of the course, you should understand the features and operation of View, View design
principles, and ThinApp operation. You should be able to do the following:
Install and configure View components
Create and manage dedicated and floating desktop pools
Deploy and manage linked-clone virtual desktops
Configure and manage desktops that run in local mode
Configure secure access to desktops through a public network
Use ThinApp to package applications
This course provides the same level of coverage as the VMware View: Install, Configure and Manage
class while providing more in-depth coverage of ThinApp and coverage of design topics (note, design
topics are not covered in the VCP-Desktop exam). This course is recommended for individuals who
want a more in-depth learning experience that includes design methodologies.
5. Additional Resources
5.1 Mock Exam
VMware provides a mock exam for the VCP-Desktop Exam. The mock exam contains sample questions, along
with explanation for incorrect responses. The mock exam presents 25 questions, written by the same authors
of the actual exam. The mock exam pass score is set to 100%, and a candidate can retake the mock exam as
many times as desired until the 100% score is achieved. Please be advised that the pass score for the mock
exam is unrelated to the pass score for the actual exam. Refer to section 1.3 for the scoring information for
the VCP-Desktop Exam.
The mock exam is located at: http://mylearn.vmware.com/quiz.cfm?item=61532
8/18/2019 VCP6 Desktop VCPD610 Exam Blueprint v1 3
http://slidepdf.com/reader/full/vcp6-desktop-vcpd610-exam-blueprint-v1-3 33/33
5.2 VCP-Desktop Community
VMware provides an online community for VCP candidates. This community contains valuable information
from other candidates and senior Desktop professionals, and is moderated by VMware certification staff. The
community is located at: https://communities.vmware.com/community/vmtn/certedu/certification/vcp.
5.3 Building a vSphere Test Environment
Most VMware products can be downloaded and evaluated for 60 days. If you have the equipment to install a
copy of ESXi 5.x, you can install ESXi in a virtual machine. This would allow you to install multiple copies of
ESXi and a copy of vCenter Server. For shared storage, obtain a virtual appliance that contains an iSCSI target.
Several of these are available on the appliance marketplace.
Version Date Change Notes
1.0 2014-11-14 Initial creation of VCPD610 exam blueprint
1.1 2014-11-20 Updated Section 4.1 VCP-Desktop path with correct exam authorization URL.
Updated Section 5.1 Mock Exam with current practice exam URL.
1.2 2014-12-18 Updated Section 4.2 Course Requirement Options with the new qualifying course:
“VMware Mirage [V5.0] and Horizon with View [V6.0]: Fast Track”.
1.3 2015-01-18 Corrected Table of Contents