vector v12s - lumino · 2017-03-17 · 2 overview vector v12s optimum performance in a 12.0 by...
TRANSCRIPT
VECTOR V12SSPECIFIERS GUIDE
2
Overview
Vector V12S
Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE® technology.
High output V12S-12 model gives up to 1100lm per metre (335lm/ft). Ideally suited to concealed lighting applications such as coving, uplighting, shelves, under ledges etc. IP67 version for wet locations with clear or opal cover.
Length increments of 100mm (4in) up to 2005mm (6ft 7in) with Click-Connect PowerTHRU connectors allowing longer light runs. Fixed mount or rotation mount allowing up to 90º rotation for light throw adjustment.
Key Features ≤ 1100lm/m 335lm/ft
≤ 12w/m 5w/ft
≤ 94lm/w
≤ 95 CRI
2000 - 4500K CCT
CLICK-CONNECT
PowerTHRU
24VDC CV
IP50
IP67
3
Applications
V12S is ideally suited to exterior or interior spaces where diffused output is required.
Clockwise from top:
1. Concealed handrail Imperial War Museum London 2. Exterior uplighting 8 Chifley Sydney 3. Undershelf lighting Corinthia Hotel London 4. Lift lighting 99 Bishopsgate London
4
Application Guides
Illuminated Slots
Concealed Coving
150
150
150
150
80
150
SolidEdge
SolidEdge is Lumino’s unique plaster-board edging system. Designed for full compatibility with Vector V12S
lumino.lighting/products/solidedge
Minimum recommended distances shown in mm
5
Uplighter Bar-top Hand-rail
Under Shelf
50
Minimum recommended distances shown in mm
150
150
150
150
6
LED
V12S-12W: 16.7mm LED pitchV12S-05W: 25.0mm LED pitch
Light output ratio
0.60 LOR 98° Opal diffuser0.90 LOR 70° Clear diffuser
ColorCore®
Performance Table 12W /m
CCT lumens1 /m lumens1 /w watts2 /m CRI Ra8 CRI Ra14
2000K 900 77 12 86 83
2400K 950 81 12 85 80
2700K 950 81 12 95 92
3000K 1000 85 12 95 92
3500K 1000 85 12 95 92
4000K 1100 94 12 95 92
4500K 1100 94 12 95 92
1 Maximum total LED lumens per metre excluding LOR factor. 2 Power rated at 24vdc. Data @25°C Ta
Performance Table 5W /m
CCT lumens1 /m lumens1 /w watts2 /m CRI Ra8 CRI Ra14
2000K 260 52 5 86 83
2400K 280 56 5 85 80
2700K 280 56 5 95 92
3000K 310 62 5 95 92
3500K 310 62 5 95 92
4000K 340 68 5 95 92
4500K 340 68 5 95 92
1 Maximum total LED lumens per metre excluding LOR factor. 2 Power rated at 24vdc. Data @25°C Ta
V12S-12
V12S-05
7
Photometric Data ColorCore®
Lumen output tests and photometric data conducted according to LM-79-08 standards by independent UKAS accredited test laboratory, LUX-TSI. Test duration approx 20 minutes at ambient temperature of 24.8ºC with 24 hour burn-in time. Stabilisation period, approx. 45 minutes. Humidity 49.6%RH. Voltage 24.00VDC, current 0.253A.
*Testing on production sample V10S 4000K 505mm 12w/m.
0° 30°30°
60°
90°
120°
0° 30°30°
60°
90°
120°
C90°C0°
Polar Distribution*CIE 1931 X & Y Chromaticity
y
3.82
3.70
3.76
3.77
max cdC5º
200cd
100cd
50cd
3.82x
dv
dh
0.5
1.0
2.0
4.0
3.0
5.0
m
743
186
46
12
21
7
lx
1.7
3.4
6.7
13.5
10.1
16.9
dv
1.7
3.3
6.7
13.4
10.0
16.8
dh
Illuminance at a distance*Lumen maintenence* @25°C Ta
12,000 60,00036,000hrs
120
100
80
60
40
20
lm%
L70
60,000hrs
4000K
8
Fixed Mount
Rotation Mount
Mounting
14
23
160°
14
15
V12S-MA520-R1 Fixing hole Ø4.0mm
V12S-MA620-R1 Fixing hole Ø4.0mm
9
Three mounts per metre average recommended
End to end or corner alignments with connectors
alongside
10
Dimensions
Standard lengths
~170g per metre
120mm220mm305mm405mm505mm605mm705mm805mm905mm1005mm1105mm1205mm1305mm1405mm1505mm1605mm1705mm1805mm1905mm2005mm*
*Longer lengths available on request. **13mm on 120/220mm lengths.
12.00
105 ~ 2005
7.80
22.50
7.80
13.60
150 ~ 500
~100**
150 ~ 500
~100**
11
Options & Accessories
Powerfeed Options CLICK-CONNECT Powerfeeds for IP20 CB - 150mm WIRE PowerThru GB - 500mm WIRE PowerThru CLICK-CONNECT Extenders for IP20 VECA-CA025-R1 - 250mm VECA-CA100-R1 - 1000mm No Connector for IP67 GA - 500mm WIRE PowerThru HA - 500mm WIRE Single VECA-CA901-R1 Pair of 3M Scotchlok™ IDC sealant connectors providing effective moisture and water protection 15.0 x 7.0 x 7.0 mm
500 500
500
250
1000
50 50
50
150 150
150
12
ColorCore® Technology
High CRI LED
After two years of research, development and testing, Lumino ColorCore® technology has arrived to deliver warm whites in our highest ever colour rendering.
ColorCore® HIGH CRI LEDs reach 95 Ra8 and an outstanding 92 Ra14 value. With HIGH CRI values across the whole R1-R14 colour palette, all your colours are rendered brilliantly. Our proprietary phosphor-core converts single frequency 450nm blue light into full spectrum, visible white light with strong rendering of reds, blues, greens, oranges and yellows.
Ra 95 HIGH CRI
White light in full colour for high specification lighting projects. HIGH CRI of up to 95 across R1-R8 with high values across R9-R14 including up to 86 R9.
ColorCore® can be specified in 2000K Candlelight Warm White. Residential, hotel and bar projects that can now be intimately lit without compromising colour rendering. The new 2000K CCT sits in a whole new palette of colour temperatures running from 2000K through 2400K, 2700K, 3000K, 3500K, 4000K & 4500K CCT.
Each LED is binned to a 2-Step SDCM area to very fine binning coordinates and precise flux specifications. Testing and control of these specifications gives very accurate control of correlated colour temperatures (CCT).
13
CCT CRI Ra8 CRI Ra14 Ra1 Ra2 Ra3 Ra4 Ra5 Ra6 Ra7 Ra8 Ra9 Ra10 Ra11 Ra12 Ra13 Ra14
4500K 95 92 98 95 90 96 96 91 97 96 86 86 93 66 98 94
4000K 95 92 98 97 92 97 95 93 97 94 82 89 95 67 98 95
3500K 95 92 98 97 93 96 96 94 96 91 77 89 95 73 98 95
3000K 95 92 97 97 95 95 96 95 94 88 71 91 94 80 98 96
2700K 95 92 96 98 98 95 95 97 92 83 64 93 96 82 97 98
2400K 85 80 83 91 96 82 82 88 86 68 33 78 80 72 84 97
2000K 86 83 85 95 95 81 85 96 83 66 35 88 81 87 87 98Figures based on photometric testing and evaluation in accordance with IESNA LM-79-08.
Boulevard Hotel, Baku Azerbaijan - Maurice Brill Lighting Design
14
ColorCore®
High UV Environments
For locations of continuous, high UV exposure, we recommend specifying a special order PMMA cover in opal or clear. Contact Lumino for further details.
ORDER CODES IP50
CCT
Q 2000KS 2400KT 2700KU 3000KV 3500KW 4000KX 4500K
LED
1M 5WM1L 12WM
CLICK-CONNECT
CB 50MM PowerTHRUDB 50MM Single Feed
NO CONNECTOR
GA 500MM PowerTHRU HA 500MM Single Feed
C D D -V 1 2 S 2 0 0 5 Q 1 L C B-
COVER
D OPX OPAL E CLEAR
LENGTH
XX05 MM
FINISH
D SILVER (Anodised) E WHITE (RAL9003)F BLACK (RAL 9005)
EXAMPLE ABOVE: VECTOR V12S IP50 SILVER OPX 79IN(2005MM) 2000K 12WM CLICK-CONNECT 50MM POWER-THRU
ORDER CODES IP67
CCT
Q 2000KS 2400KT 2700KU 3000KV 3500KW 4000KX 4500K
LED
1M 5WM1L 12WM
NO CONNCETOR
GA 500MM PowerTHRU HA 500MM Single Feed
I D D -V 1 2 S 2 0 0 5 Q 1 L G A-
COVER
D OPX OPAL E CLEAR
LENGTH
XX05 MM
EXAMPLE ABOVE: VECTOR V12S IP67 SILVER OPX 79IN(2005MM) 2000K 12WM 500MM POWER-THRU
FINISH
D SILVER (Anodised) E WHITE (RAL9003)F BLACK (RAL 9005)
15
Certification Standards
IEC 60598-2-4:1997 Luminaires used in conjuction with IEC 60598-1:2008 IEC 62031:2008 LED Modules for general lighting GOST R IEC 60598-2-4:1999 Luminaires used in conjuction with GOST R IEC 60598-1:2011 GOST R IEC 62031 EN55015: 2006+A1 :2007 EN61547: 1995+A1 :2000 Following the provisions of EMC Directive 2004/108/EC
CB Testing Laboratory: Intertek Product Safety Laboratory (UK) UL Certified US/CA E364314 Low-voltage Lighting Systems, Power Units, Luminaires and Fittings
Technology
Operating environment
Running Temperature (Tc): Ave. 17°C above Ta Ambient Temperature (Ta): -20 to +40°C Ingress Protection rating: IP50 / IP67 IP67
IP50
Measurement tolerances
Total Luminous Flux ±10% Correlated Colour Temperature ±100K Colour Rendering Index ±2 Power ±5%
The information in this document is subject to change without notice
Check for latest specifications at www.lumino.lighting
Copyright © 2016 LUMINO
E&OE
SG-V12S-R1701
VECTOR V12S
LUMINO Lumino House, Lovet Road Harlow, Essex CM19 5TB United Kingdom
T +44 (0) 1279 635411 E [email protected]
www.lumino.lighting