AD27.19-P-5008-01E Complaints in connection with a stored fault code - ETC troubleshooting

Complaint: Fault code:

Target gear is not reached, transmission in mechanical/hydraulic limp-home mode

Possible cause Remedy

Oil filter not assembled Assemble oil filter

Wiring harness damaged, short-circuit, chafing mark Check wiring harness to ground.

Shift pressure control solenoid valve (Y3/6y2) blocked (foreign matter) Replace solenoid valve.

Control, shift or command valve blocked (foreign matter) Check slide valve for end position and ease of movement, free off if necessary.

The spring in the control spool pressure regulating valve may be Replace spring (part no.140 993 58 01).broken

Only up to transmission end no. 6341191097.

Copyright Daimler AG 6/24/11 G/06/08. This WIS printout will not be recorded by the update service. Page 1