vendor name: titan machinery inc. contact person: · pdf file · 2014-01-28spec #...

SPEC #422-712

T-628(5)

Tractors, Sub Compact Utility

STATE OF MINNESOTA

PRICE PAGE

(Typed Response Required)

July, 2012

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip

Phone #:

Toll Free #:

Fax #:

Email Address: [email protected]

SPEC # INFORMATION REQUESTED ANSWER

1.0 Tractor Catalog Section Price List Title: Farmall Series Compact Tractors

Date & I.D. of Price List 1-Sep-11

Percentage Discount to be applied to Price List 31% Tractors 22% Attachments

1.1 Price for manuals, (service, parts, repair, and operations) 450.00$

1.2 Price for set of fluid and air filters 150.00$

2.0 PERFORMANCE/EXTENDED WARRANTY OPTIONS

Offer performance/warranty options. Numbers starting with 2.1, 2.2, etc.

(Specify years, miles or hours extended term covers.)

2.1 ______________________________________________ $

2.2 ______________________________________________ $

3.0 INSTALLATION - PER HOUR 93.00$

Installation services may be requested on an "as needed" basis.

See Special Terms and Conditions

4.0 NEW EQUIPMENT RENTAL PROGRAM

If rental programs are available on the new equipment offered, with the option to

purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental

fee paid by the purchaser that will be applied to the purchase price. See Solicitation

Special Terms & Conditions.Hourly Rental Rate:

Weekly Rental Rate: N/A

Monthly Rental Rate: N/A

Percent (%) of Rental Fee applied to purchase price: N/A

If the new rental equipment is purchased and finance

charges are applicable for the actual rental term only,

state the actual interest rate here: ________________

5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM

See Special Terms and Conditions.

DEDUCT cost per Used Hour from the original Contract Price $

6.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES

See Special Terms and Conditions % Discount

7.0 DELIVERY STARTING POINT - City, State, Zip Nearest Titan Machinery Inc.

Roseau, Theif River Falls, Crookston, Ada, Moorhead, Wahpeton, Fergus Falls,

Elbow Lake, Graceville, Redwood Falls, Marshall, Pipestone, MN

See Special Terms and Conditions - No flat rate allowed 2.50$

Titan Machinery Inc.

Andy Bethel

507-532-2240

1201 North HWY 59

Marshall, MN 56258

507-532-5783

800-658-2302

��

��

��

��

��

��

��

�� !"#$��

��%�&' !()��

��

�� FARMALL 30B AND 35B COMPACT TRACTORS Standard Features ................................................................................................................................... 1 Price List .................................................................................................................................................. 3 Factory Supplied Attachments ................................................................................................................. 5

FARMALL 40B AND 50B COMPACT TRACTORS Standard Features ................................................................................................................................... 7 Price List .................................................................................................................................................. 9 Factory Supplied Attachments ................................................................................................................. 11

�� *��%�� L300 LOADERS FOR COMPACT FARMALL B Standard Features ................................................................................................................................... 13 Price List .................................................................................................................................................. 15

MW SERIES MOWERS FOR FARMALL B Standard Features ................................................................................................................................... 17 Price List .................................................................................................................................................. 18

MW SERIES MID-MOUNTED SIDE DISCHARGE MOWER DECKS Standard Features ................................................................................................................................... 19 Price List .................................................................................................................................................. 20

MW SERIES MID-MOUNTED REAR DISCHARGE MOWER DECKS Standard Features ................................................................................................................................... 21 Price List .................................................................................................................................................. 22

RR SERIES REAR MOUNT FINISHING MOWERS Standard Features ................................................................................................................................... 23 Price List .................................................................................................................................................. 25

BR SERIES FRONT MOUNT ROTARY BROOMS Standard Features ................................................................................................................................... 27 Price List .................................................................................................................................................. 28 Factory Supplied Attachments ................................................................................................................. 30

TL SERIES ROTARY TILLERS Standard Features ................................................................................................................................... 31 Price List .................................................................................................................................................. 33

BM SERIES FRONT MOUNTED BLADES Standard Features ................................................................................................................................... 35 Price List .................................................................................................................................................. 36 Factory Supplied Attachments ................................................................................................................. 38

BM SERIES FRONT MOUNTED BLADES Standard Features ................................................................................................................................... 39 Price List .................................................................................................................................................. 40

��

BS SERIES FRONT MOUNT SNOW BLOWERS Standard Features ................................................................................................................................... 41 Price List .................................................................................................................................................. 43 Factory Supplied Attachments ................................................................................................................. 46

BS SERIES REAR MOUNT SNOW BLOWERS Standard Features ................................................................................................................................... 47 Price List .................................................................................................................................................. 48 Factory Supplied Attachments ................................................................................................................. 49

BH SERIES BACKHOES Standard Features ................................................................................................................................... 51 Price List .................................................................................................................................................. 53 Factory Supplied Attachments ................................................................................................................. 57

RC ROTARY CUTTERS Standard Features ................................................................................................................................... 59 Price List .................................................................................................................................................. 62 Factory Supplied Attachments ................................................................................................................. 64

WORK EZ ® DISK HARROW Standard Features ................................................................................................................................... 65 Price List .................................................................................................................................................. 66

WORK EZ ® RAKES Standard Features ................................................................................................................................... 67 Price List .................................................................................................................................................. 68

WORK EZ ® BOX BLADES Standard Features ................................................................................................................................... 69 Price List .................................................................................................................................................. 70

WORK EZ ® REAR BLADES Standard Features ................................................................................................................................... 71 Price List .................................................................................................................................................. 72

WORK EZ ® EZ MATCH Standard Features ................................................................................................................................... 73 Price List .................................................................................................................................................. 74

WORK EZ ® BALE CARRIERS Standard Features ................................................................................................................................... 75 Price List .................................................................................................................................................. 76

WORK EZ ® HAY SPEARS Standard Features ................................................................................................................................... 77 Price List .................................................................................................................................................. 78

��

PARTS DIVISION SUPPLIED ACCESSORIES - TRACTORS ...................................................................... 79 PARTS DIVISION SUPPLIED ACCESSORIES - LOADERS.......................................................................... 89 PARTS DIVISION SUPPLIED ACCESSORIES - IMPLEMENTS.................................................................... 91 REFERRAL ATTACHMENTS......................................................................................................................... 93 CASE IH PURCHASED PROTECTION.......................................................................................................... 95

(Ex Works Port of Entry)

FARMALL 30B AND 35B COMPACT TRACTORUS PRICE LIST

-T0CH 01

Standard Equipment

DIESEL ENGINE: TRANSMISSION OPTIONS: Farmall 30B 12 x 12 Synchronized Shuttle Shift Mitsubishi S4L 4 Cyl. Diesel Engine (SSS) 28.1 Gross Engine hp @ 2600 rpm Left-hand, dash mounted, 23.9 PTO hp @ 2600 rpm (Gear) synchronized shuttle 22.5 PTO hp @ 2600 rpm (Hydro) (4) Synchronized gears 92 cu. in.(1.5L) Displacement (3) Non-synchronized ranges

Farmall 35B: 3-Range Hydrostatic with Cruise Control Mitsubishi S4L2 4 Cyl. Diesel Engine and Dual-Pedal direction control for 38.0 Gross Engine hp @ 2700 rpm forward and reverse 32.2 PTO hp @ 2700 rpm (Gear) 30.3 PTO hp @ 2700 rpm (Hydro) HYDRAULIC SYSTEM: 107 cu. in. (1.8L) Displacement Open Center Hydraulic System

Dual Gear-type Pumps ALL MODELS: Implement Pump Capacity: 4 Cylinders - Farmall 30B = 8.2 gpm (31.2 L/min) Naturally Aspirated - Farmall 35B = 8.6 gpm (32.4 L/min) Under Hood Muffler / Exhaust Steering Pump Capacity: Two-stage Dual Element Air Cleaner - Farmall 30B = 4.1 gpm (15.6 L/min) Full-flow, Spin-on Oil Filter - Farmall 35B = 4.3 gpm (16.2 L/min) 8.7 gallon (33L) Fuel Tank Mid-mount Hydraulic Valve & Fuel Filter with water separator Joystick (STD) Quick Glow Plug Starting Aid Flip-up Hood w/ Gas Strut 3-POINT LIFT SYSTEM:

Lift Capacity @ 24 in. behind link ends: INSTRUMENT PANEL: 1433 lb. (650 kg) Analog Tachometer Category I, 3-point Linkage Fuel Gauge Position Control Lever Coolant Temperature Gauge Drop Rate Control Knob Hour Meter Crank-type Leveling Mechanism Engine Oil Pressure Warning Light Telescoping Stabilizers Battery Charge Warning Light Flexible Link Ends Cold Starting Aid Indicator Light PTO ON Indicator Light ROPS: Parking Brake Indicator Light 2-Post, Foldable Roll Bar Turn Indicator Lights Seat Belt Hazard Flasher Indicator Lights High Beam Headlight Indicator ELECTRICAL:

12-volt, 80Ah, 660 CCA Battery Safety Start Switch Key Start/Fuel Shutoff 50 amp Alternator Operator Presence System

-T0CH 01 015 000 12-OCT-11%



-T0CH 01

Standard Equipment

LIGHTING: (2) Halogen Corner Work Lights FRONT AXLE: (2) Halogen Headlights Four Wheel Drive (MFD) (2) Taillights / Brakelights Fixed Position Rims (2) Flashing Warning Lights / Turn 45.6 in. (1159 mm) Tread Setting with Signals R4 tires

PTO: REAR AXLE: Rear PTO Flange Type Axle - Independent 540 rpm Reversible Position Rims - R1 tires only - Electro-hydraulic engagement Fixed Position Rims - R3, R4 tires - Flip-up Shield 46.5 in. (1181 mm) Tread Setting with - Shaft Cap R4 tires

DRAWBAR: OPERATOR'S AREA: Swinging Contoured Cushion Seat 2-Position Extendable - Fore / Aft / Height / Weight

Compensating REAR DIFFERENTIAL LOCK - Spring Suspension

Deluxe Floor Mat STEERING: Foot Throttle Hydrostatic Power Steering Left Side Step Tilt Steering Column Left Side Grab Handle

Right Side Cupholder & Tray BRAKES: Wet Disc SLOW MOVING VEHICLE EMBLEM Dual Brake Pedals Foot-assist Parking Brake Lever

-T0CH 01 015 000 12-OCT-11:



-T0CH 01

Models

COMMERCIALMODEL

VERSION ENGINE POWER TRACTION Weight Factory Data List Price

FARMALL 30BTRACTOR

Rops 30 HP 4 WD 9012407P01 $16,113.00

FARMALL 35BTRACTOR

Rops 35 HP 4 WD 9014656P95 $19,035.00

Packet Description Weight Factory Data List Price Farmall B Pack 1 9002897P51 $3763.00 SD_T2810-TRANSMISSION Hydrostatic Transmission SD_T4940-FRONT WHEELS ANDTIRES

25 x 8.50-14 6PR R4

SD_T4950-REAR WHEELS ANDTIRES

43X16.00-20 R4

SD_T8270-REAR REMOTES 1 Remote SDA

Factory Supplied Options

Order Code Description Weight Factory Data List Price

TRANSMISSION

SD_T2810 TRANSMISSION 720110 12 x 12 Synchro-shuttle No Charge 729290 Hydrostatic Transmission 9001231P23 $1,599.00

REAR WHEELS AND TIRES

SD_T4950 REAR WHEELS AND TIRES 8332604 11.2 x 24 4PR R1 Ag Bar 9000652P19 $847.00 8304804 41X14.00-20 4PR R3 9000997P92 $1,296.00 8364564 43X16.00-20 R4 9000863P94 $1,122.00 8399907 Less rear wheels and tires No Charge

-T0CH 01 015 000 12-OCT-11<



-T0CH 01

FRONT WHEELS AND TIRES

SD_T4940 FRONT WHEELS AND TIRES 8204604 7 x 14 6PR R1 Ag Bar 9000254P87 $331.00 8152604 25X8.50-14 4PR R3 T 9000254P87 $331.00 8266304 25 x 8.50-14 6PR R4 9000332P64 $432.00 8199907 Less front wheels and tires. No Charge

HITCH AND DRAWBAR

SD_T8960 3 - POINT LINKAGE-REAR 720902 3-Point Hitch w/ flexlink ends No Charge

REMOTES

SD_T8270 REAR REMOTES XT8270X Base Equipment -See Std Featrs

Less Rear Remote No Charge

720366 1 Remote SDA Fits Farmall 30B/35B Gear or Hydro & Farmall 40B/45B Gear

9000469P70 $610.00

-T0CH 01 015 000 12-OCT-11*



-T0CH 01

Factory Supplied Attachments


Front Tires 719689036 25x8.5-14 4PR R3 TURF CIH 98 LB 9000254P87 $331.00 719955036 7x14 6PR R1 CIH 95 LB 9000258P72 $336.00 719959056 25x8.50-14 6PR R4 CIH 107 LB 9000332P64 $432.00

Rear Tires 719781036 41x14.00-20 4PR TURF TL R3 CIH 347 LB 9000997P92 $1,296.00 719956036 11.2x24 4PR R1 CIH 343 LB 9000652P19 $847.00 719142016 43x16.00-20 4PR TL IND R4 CIH 418 LB 9000863P94 $1,122.00

-T0CH 01 015 000 12-OCT-11(

�

'



-T0CH 02

Standard Equipment

DIESEL ENGINE: TRANSMISSION OPTIONS: Farmall 40B 16 x 16 Synchronized Shuttle Shift Mitsubishi S4QL 4 Cyl. Diesel Engine (SSS) 41.0 Gross Engine hp @ 2600 rpm Left-hand, dash mounted, 34.3 PTO hp @ 2600 rpm (Gear) synchronized shuttle 32.8 PTO hp @ 2600 rpm (Hydro) (4) Synchronized gears 153 cu. in.(2.5L) Displacement (4) Non-synchronized ranges

Farmall 50B: 3-Range Hydrostatic with Cruise Control Mitsubishi S4QL 4 Cyl. Diesel Engine and Dual-Pedal direction control for 47.0 Gross Engine hp @ 2700 rpm forward and reverse 39.4 PTO hp @ 2700 rpm (Gear) 37.1 PTO hp @ 2700 rpm (Hydro) HYDRAULIC SYSTEM: 153 cu. in. (2.5L) Displacement Open Center Hydraulic System

Dual Gear-type Pumps ALL MODELS: Implement Pump Capacity: 4 Cylinders - 8.2 gpm (31.2 L/min) Naturally Aspirated Steering Pump Capacity: Under Hood Muffler / Exhaust - Gear models = 4.1 gpm (15.6 L/min) Two-stage Dual Element Air Cleaner - HST models = 5.5 gpm (20.8 L/min) Full-flow, Spin-on Oil Filter Mid-mount Hydraulic Valve & 9.5 gallon (36L) Fuel Tank Joystick (STD) Fuel Filter with water separator Quick Glow Plug Starting Aid 3-POINT LIFT SYSTEM: Flip-up Hood w/ Gas Strut Lift Capacity @ 24 in. behind link ends:

2469 lb. (1120 kg) INSTRUMENT PANEL: Category I, 3-point Linkage Analog Tachometer Position Control Lever Fuel Gauge Drop Rate Control Knob Coolant Temperature Gauge Crank-type Leveling Mechanism Hour Meter Telescoping Stabilizers Engine Oil Pressure Warning Light Flexible Link Ends Battery Charge Warning Light Cold Starting Aid Indicator Light ROPS: PTO ON Indicator Light 2-Post, Foldable Roll Bar Parking Brake Indicator Light Seat Belt Turn Indicator Lights Hazard Flasher Indicator Lights ELECTRICAL: High Beam Headlight Indicator 12-volt, 80Ah, 660 CCA Battery

Safety Start Switch Key Start/Fuel Shutoff 50 amp Alternator Operator Presence System

-T0CH 02 015 000 12-OCT-11?



-T0CH 02

Standard Equipment

LIGHTING: FRONT AXLE: (2) Halogen Corner Work Lights Four Wheel Drive (MFD) (2) Halogen Headlights Fixed Position Rims (2) Taillights / Brakelights 51.7 in. (1314 mm) Tread Setting with (2) Flashing Warning Lights / Turn R4 tires Signals

REAR AXLE: PTO: Flange Type Axle Rear PTO Reversible Position Rims - R1 tires only - Independent 540 rpm Fixed Position Rims - R3, R4 tires - Electro-hydraulic engagement 47.7 in. (1212 mm) Tread Setting with - Flip-up Shield R4 tires - Shaft Cap

OPERATOR'S AREA: DRAWBAR: Contoured Cushion Seat Swinging - Fore / Aft / Height / Weight 2-Position Extendable Compensating

- Spring Suspension REAR DIFFERENTIAL LOCK Deluxe Floor Mat

Foot Throttle STEERING: Left Side Step Hydrostatic Power Steering Left Side Grab Handle Tilt Steering Column Right Side Cupholder & Tray

BRAKES: SLOW MOVING VEHICLE EMBLEM Wet Disc Dual Brake Pedals Foot-assist Parking Brake Lever

-T0CH 02 015 000 12-OCT-11A



-T0CH 02

Models

COMMERCIALMODEL

VERSION ENGINE POWER TRACTION Weight Factory Data List Price

FARMALL 40BTRACTOR

Rops 40 HP 4 WD 9016428P72 $21,336.00

FARMALL 50BTRACTOR

Rops 50 HP 4 WD 9017814P72 $23,136.00

Packet Description Weight Factory Data List Price Farmall B Pack 1 9003210P90 $4170.00 SD_T2810-TRANSMISSION HST + 3 RANGE SD_T4940-FRONT WHEELS ANDTIRES

10X16.5 6PR R4

SD_T4950-REAR WHEELS ANDTIRES

420/70 -24 TL R4

SD_T8270-REAR REMOTES 1 Remote DA



TRANSMISSION

SD_T2810 TRANSMISSION 330014 HST + 3 RANGE 9001231P23 $1,599.00 330271 16x16 Synchro Shuttle No Charge

REAR WHEELS AND TIRES

SD_T4950 REAR WHEELS AND TIRES 8338604 13.6-24 4PR R1 9000735P35 $955.00 8304804 41X14.00-20 4PR R3 9000997P92 $1,296.00 8320664 420/70 -24 TL R4 9000930P93 $1,209.00 8399907 Less rear wheels and tires No Charge

-T0CH 02 015 000 12-OCT-11)



-T0CH 02

FRONT WHEELS AND TIRES

SD_T4940 FRONT WHEELS AND TIRES 8253304 9.5X16 4PR R1 9000501P27 $651.00 8299604 28 X 8.50-15 4PR R3 9000501P27 $651.00 8254304 10X16.5 6PR R4 9000579P04 $752.00 8199907 Less front wheels and tires. No Charge

HITCH AND DRAWBAR

SD_T8960 3 - POINT LINKAGE-REAR 720902 3-Point Hitch w/ flexlink ends No Charge

REMOTES

SD_T8270 REAR REMOTES XT8270X Base Equipment -See Std Featrs

Less Rear Remote No Charge

720366 1 Remote SDA Fits Farmall 30B/35B Gear or Hydro & Farmall 40B/45B Gear

9000469P70 $610.00

720826 1 Remote DA Fits Farmall B 40/50 Hydro

9000469P70 $610.00

-T0CH 02 015 000 12-OCT-11%;



-T0CH 02


Order Code Description Weight Factory Data List Price 719781036 41x14.00-20 4PR TURF TL R3 CIH 347 LB 9000997P92 $1,296.00 719963036 13.6x24 4PR R1 CIH 298 LB 9000735P35 $955.00 719110016 420/70-24 8PR TL R4 CIH 268 LB 9000930P93 $1,209.00

Front Tires 719145016 28x8.50-15 4PR TL TURF R3 CIH 418 LB 9000501P27 $651.00 719913036 9.5-16 4PR R1 CIH 153 LB 9000501P27 $651.00 719968056 10x16.5 6PR TL R4 CIH 173 LB 9000579P04 $752.00

-T0CH 02 015 000 12-OCT-11%%

�

%:


L300 LOADERS FOR COMPACT FARMALL BUS PRICE LIST

-CP9J 01

Standard Equipment

L340 SPECIFICATIONS L340 SPECIFICATIONS (PER ASAE S301.3): (PER ASAE S301.3): L340 Loader includes the following: L340 (For Farmall 30B & 35B)

Distances in (in/mm) unless Basic Loader for Farmall 30B & 35B otherwise noted. Forces in (lbs/kg) Mounting Kit unless otherwise noted Quick Coupler - Skid Steer Style Curved Boom, Mid-Mount, Quick 68" HD Material Bucket (Quick Attach) Attach Design (Mid-mount valve & Joystick are Maximum Lift Height: included with tractor) 98.4 / 2500

Dump Clearance: Loader specifications are subject to 75.3 / 1913 change and may vary based on tractor Digging Depth: model and tire size. 8 / 203

Lift Capacity @ bucket pivot point: 1250 / 567 @ 19.7 in. (500mm) from bucket pivot point: 890 / 404 Breakout Force @ bucket pivot point: 2700 / 1225 @ 19.7 in. (500mm) from bucket pivot point: 1900 / 862 Reach @ Maximum Lift: 31 / 787 Bucket Rollback: 32º Bucket Dump Angle: 39º Bucket Level Indicator Parking Stand

NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for recommended counterweighting

-CP9J 01 015 000 12-OCT-11%<



-CP9J 01

Standard Equipment

L350 SPECIFICATIONS L350 SPECIFICATIONS (PER ASAE S301.3): (PER ASAE S301.3): L350 Loader includes the following: L350 (For Farmall 40B and 50B)

Distances in (in/mm) unless Basic Loader for Farmall 40B & 50B otherwise noted. Forces in (lbs/kg) Mounting Kit unless otherwise noted Quick Coupler - Skid Steer Style Curved Boom, Mid-Mount, Quick 72" HD Material Bucket (Quick Attach) Attach Design (Mid-mount valve & Joystick are Maximum Lift Height: included with tractor) 105 / 2667

Dump Clearance: Loader specifications are subject to 81.5 / 2070 change and may vary based on tractor Digging Depth: model and tire size. 6.5 / 165

Lift Capacity @ bucket pivot point: 2000 / 907 @ 19.7 in. (500mm) from bucket pivot point: 1540 / 699 Breakout Force @ bucket pivot point: 3540 / 1606 @ 19.7 in. (500mm) from bucket pivot point: 2640 / 1197 Reach @ Maximum Lift: 33 / 838 Bucket Rollback: 30º Bucket Dump Angle: 58º 4-Bar Bucket Linkage Bucket Level Indicator, Parking Stand

COMPATIBILITY INFORMATION: To assure proper performance, see Operator's manual for recommended counterweighting

-CP9J 01 015 000 12-OCT-11%*



-CP9J 01

Models

COMMERCIALMODEL

PACKAGED KIT SPECIALTY Weight Factory Data List Price

L340 FARMALL30B/35B

Quick Attach Less Valve 68 in. Bucket 650 LB 9004221P14 $5,482.00

L350 FARMALL40B/50B

Quick Attach Less Valve 72 in. Bucket 488 LB 9004587P66 $5,958.00

-CP9J 01 015 000 12-OCT-11%(

�

%'

(Ex Works Wholegoods Depot)

MW SERIES MOWERS FOR FARMALL BUS PRICE LIST

-CP1Z 01

Standard Equipment

MW166S Side Discharge Mid-Mount MW172S Side Discharge Mid-Mount Rotary Mower Rotary Mower For use with Farmall 30B & 35B Tractors For use with Farmall 40B & 50B Tractors

SPECIFICATIONS: SPECIFICATIONS: Cutting Width (in.) - 66 Cutting Width (in.) - 72 Cutting Height (in.) - 1-4 Cutting Height (in.) - 1-4 Overall width (in.) - discharge chute Overall width (in.) - discharge chute down 69 down 85 Number of Blades - 3 Number of Blades - 3 Blade Type - Standard Blade Type - Standard Blade Length/Width (in.) - 23 L x 2.5 W Blade Length/Width (in.) - 25 L x 2.5 W Blade Tip Speed (in feet per minute) - Blade Tip Speed (in feet per minute) - Less than 18000 (ANSI) Less than 18,000 (ANSI) Drive - Mid PTO Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides, Deck Shell Weldment - 10 gauge sides, 10 gauge top, 1/4" spindle 10 gauge top, 1/4" spindle reinforcement pads reinforcement pads

Tire Compatibility: Tire Compatibility: Agricultural (R1) - Yes, limited turn Agricultural (R1) - NO angle: Large Industrial (R4) - NO Right Hand - 24 degrees, Left Hand - 27 Small Industrial (R4) - Yes, limited turn degrees angle: Industrial (R4) - Yes, limited turn angle: Right Hand - 34 degrees, Left Hand - 35 Right Hand - 33 degrees, Left Hand - 37 degrees degrees Turf (R3) - Yes, limited turn angle: Turf (R3) - Yes, limited turn angle: Right Hand - 34 degrees, Left Hand - 35 Right Hand - 33 degrees, Left Hand - 37 degrees degrees Galaxy Turf - NO Galaxy Turf - NO

Mulch Kit - AMENHM728 (Service Parts) Mulch Kit - AMENHM628 (Service Parts)

-CP1Z 01 014 000 01-SEP-11?=


MW SERIES MOWERS FOR FARMALL BUS PRICE LIST

-CP1Z 01

Models

COMMERCIAL MODEL Weight Factory Data List Price MW66S FARMALL B 9002320P78 $3,014.00 MW72S FARMALL B 9002726P57 $3,541.00

-CP1Z 01 014 000 01-SEP-11?k


MW SERIES MID-MOUNTED SIDE DISCHARGE MDUS PRICE LIST

-CP1Q 01

Standard Equipment

MW60S (FOR FARMALL 31 AND 35): MW72S: (continued) Mid-mounted, direct drive, Blade dimensions: finishing mower Length 24.5 inches (622mm) Cutting width: 60 inches (1524mm) Width 3 inches (76mm) Discharge: Side Blade tip speed @ rated engine speed: Number of blades: 3 15616 (FPM) Blade type: High lift Mid PTO drive Blade dimensions: Cutting height: 1.5 to 4 inches Length 20.4 inches (518mm) (38 to 102mm) Width 2.5 inches (64mm) Gauge wheels: 6 x 2.5 inches Blade tip speed @ rated engine speed: (152 x 64mm) 15306 (FPM) Overall width: 85.5 inches (2177mm) Mid PTO drive Deck spring suspension Cutting height: 1.5 to 4 inches Tire compatibility: Turf - Industrial - (38 to 102mm) Galaxy® Turf* Gauge wheels: 6 x 2.5 inches (152 x 64mm) Requirements for Operation: Overall width with discharge chute TRACTOR MID MOUNT PTO IS down: 76.5 inches (1943mm) REQUIRED. If tractor is not equipped Deck spring suspension with Mid Mount PTO, order appropriate Tire compatibility: Turf - Industrial - kit from tractor Parts Division Supplied Galaxy® Turf* Accessories chart.

MW72S (FOR FARMALL 31 AND 35): * When installing an MW60S or MW72S Mid-mounted, direct drive, on a Farmall 31 or 35 equipped with finishing mower Galaxy® turf tires, service kit AUB164147 Cutting width: 72 inches (1830mm) is required. Discharge: Side Number of blades: 3 Please order AUB164147 from Parts Blade type: Standard Division Supplied Accessories.

Galaxy® is a registered trademark of Galaxy Tire & Wheel Inc.

-CP1Q 01 014 000 01-SEP-11?q


MW SERIES MID-MOUNTED SIDE DISCHARGE MDUS PRICE LIST

-CP1Q 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price MW60S MD_MT SIDE MOW MWX602 60IN SD CLS 515 LB 9002758P91 $3,583.00 MW72S MD_MT SIDE MOW MWX72S 72IN SD CLS 515 LB 9003488P87 $4,531.00



OPERATOR'S MANUAL

SD_47012 OPERATOR'S MANUAL 725847 North American English 1 LB No Charge

ADDITIONAL OPERATOR'S MANUAL

SD_47083 OPERATOR'S MANUAL X47083X Language Manual English No Charge 715294 French Canadian 715294 1 LB No Charge

-CP1Q 01 014 000 01-SEP-1145


MW SERIES MID-MOUNTED REAR DISCHARGE MDUS PRICE LIST

-CP1Q 02

Standard Equipment

MW72R (FOR FARMALL 31 AND 35): MW84R: (continued) Mid-mounted, direct drive, Gauge wheels: 6 x 2.5 inches finishing mower (152 x 64mm) Cutting width: 72 inches (1830mm) Overall width: 87.4 inches (2220mm) Discharge: Rear Deck spring suspension Number of blades: 3 Tire compatibility: Ag-Turf-Industrial- Blade type: Standard Galaxy® Turf** Blade dimensions: Length 24.5 inches (622mm) (Note: The MW84R cannot be installed Width 3 inches (76mm) on Farmall 40 and 45 CVT versions) Blade tip speed @ rated engine speed: 15616 (FPM) Requirements for Operation: Mid PTO drive TRACTOR MID MOUNT PTO IS Cutting height: 1.5 to 4 inches REQUIRED. If tractor is not equipped (38 to 102mm) with Mid Mount PTO, order appropriate Gauge wheels: 6 x 2.5 inches kit from tractor Parts Division Supplied (152 x 64mm) Accessories chart. Overall width: 74.4 inches (1890mm) Deck spring suspension * When installing an MW72R on a Tire compatibility: Ag-Turf-Industrial- Farmall 31 or 35 equipped with Galaxy® Galaxy® Turf* turf tires, service kit AUB164147 is

required. MW84R (FOR FARMALL 40 AND 45 - HST ONLY): ** When installing an MW84R on a Mid-mounted, direct drive, Farmall 40 or 45 equipped with Galaxy® finishing mower turf tires, service kit AUB163560 is Cutting width: 84 inches (2134mm) required. Discharge: Rear Number of blades: 4 (Please order AUB164147 or Blade type: Gator® Mulcher Blades AUB163560 from Parts Division Blade dimensions: Supplied Accessories) Length 22.81 inches (580mm) Width 3 inches (76mm) Galaxy® is a registered trademark of Blade tip speed @ rated engine speed: Galaxy Tire & Wheel Inc. 15616 (FPM) Mid PTO drive Gator® is a registered trademark of Cutting height: 2 to 4 inches Frederick Manufacturing of (51 to 102mm) Kansas City, MO

-CP1Q 02 014 000 01-SEP-114?


MW SERIES MID-MOUNTED REAR DISCHARGE MDUS PRICE LIST

-CP1Q 02

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price MW72R MD_MT REAR MOW MWX72R 72IN RD MULC 515 LB 9003629P01 $4,713.00 MW84R MD_MT REAR MOW MWX84R 84IN RD MULC 515 LB 9005095P86 $6,618.00



OPERATOR'S MANUAL




-CP1Q 02 014 000 01-SEP-1144


RR SERIES REAR MOUNT FINISHING MOWERSUS PRICE LIST

-CP1A 01

Standard Equipment

RR60 - RIGID FRAME: RR144 - FLEX WING: Category I 3-point mounted Overall Cutting Width - 12 ft. (3.66m) Flex finishing mower Center Deck Cutting Width - 5 ft. (1.52m) Cutting Width: 60 inches (1524mm) Wing Deck Cutting Width - 4 ft. (1.22m) Discharge: Rear Deck Overlap - 6 in. (152 mm) Discharge Safety Chain Overall Width - 146 in. (3.71m) PTO HP Rating: Up to 30 Transport Width - 100 in. (2.54m) Drive Method: Rear 540 RPM PTO Maximum Overall Length - 182 in. Number of Blades: 3 (4.62m) Blade Drive: V-Belt Transport Length - 177 in. (4.5m) Blade speed (RPM): 2,630 Transport Height - 90 in. (2.29m) Cutting Height: 1 to 4 in. (25 to 101mm) Minimum HP - 30 (4) Solid Rubber Gauge Wheels Cutting Height Range - 1 to 5 in. (fully rotating) (25 to 127 mm)

Blade Tip Speed (FPM) - 16,000 RR72 - RIGID FRAME: Caster Wheels (12) - 15x6.00-6 Category I 3-point mounted Transport Tires (2) - 26x12.00-12 finishing Mower Cutting Width: 72 inches (1829mm) RR180 - FLEX WING: Discharge: Rear Overall Cutting Width - 15 ft. (4.57m) Flex Discharge Safety Chain Center Deck Cutting Width - 6 ft. (1.83m) PTO HP Rating: Up to 40 Wing Deck Cutting Width - 5 ft. (1.52m) Drive Method: Rear 540 RPM PTO Deck Overlap - 6 in. (152 mm) Number of Blades: 3 Overall Width - 182 in. (4.62m) Blade Drive: V-Belt Transport Width - 101 in. (2.57m) Blade speed (RPM): 2,230 Maximum Overall Length - 185 in. (4.7m) Cutting Height: 1 to 4 in. (25 to 101mm) Transport Length - 180 in. (4.57m) (4) Solid Rubber Gauge Wheels Transport Height - 100 in. (2.54m) (fully rotating) Minimum HP - 35

Cutting Height Range - 1 to 5 in. RR90 - RIGID FRAME: (25 to 127 mm) Category I 3-point mounted Blade Tip Speed (FPM) - 16,000 finishing mower Caster Wheels (12) - 15x6.00-6 Cutting Width: 90 inches (2286mm) Transport Tires (2) - 26x12.00-12 Discharge: Rear Discharge Safety Chain PTO HP Rating: Up to 60 Drive Method: Rear 540 RPM PTO Number of Blades: 5 Blade Drive: V-Belt Blade speed (RPM): 2,630 Cutting Height: 1 to 4 in. (25 to 101mm) (4) Solid Rubber Gauge Wheels (fully rotating)

-CP1A 01 014 000 01-SEP-1147



-CP1A 01

Standard Equipment

RR204 - FLEX WING: RR204 - FLEX WING: (continued) Overall Cutting Width - 17 ft. (5.18m) Flex Transport Length - 188 in. (4.78m) Center Deck Cutting Width - 7.5 ft. Transport Height - 110 in. (2.79m) (2.29m) Minimum HP - 40 Wing Deck Cutting Width - 6 ft. (1.83m) Cutting Height Range - 1 to 5 in. Deck Overlap - 12 in. (305 mm) (25 to 127 mm) Overall Width - 207 in. (5.26m) Blade Tip Speed (FPM) - 16,000 Transport Width - 102 in. (2.59m) Caster Wheels (12) - 15x6.00-6 Maximum Overall Length - 196 in. Transport Tires (2) - 26x12.00-12 (4.98m)

-CP1A 01 014 000 01-SEP-1148



-CP1A 01

Models

COMMERCIAL MODEL Weight Factory Data List Price RR60 60 INCH MOWER 2,000 LB 9002066P68 $2,684.00 RR72 72 INCH MOWER 2,000 LB 9002177P56 $2,828.00 RR90 90 INCH MOWER 2,000 LB 9002983P75 $3,875.00 RR144 12 FT MOWER 3,000 LB 9011242P77 $14,601.00 RR180 15 FT MOWER 3,520 LB 9012129P04 $15,752.00 RR204 17 FT MOWER 3,520 LB 9013204P73 $17,149.00



OPERATOR'S MANUAL


-CP1A 01 014 000 01-SEP-1146


BR SERIES FRONT MOUNT ROTARY BROOMSUS PRICE LIST

-CP1C 01

Standard Equipment

Model BR160: REQUIREMENTS FOR OPERATION: (FOR FARMALL 31, 35, 40, 45 & 50) TRACTOR MID MOUNT PTO IS Quick attach design, mid-PTO driven REQUIRED. Sweeping width: 55 inches (1397mm) Sweeping width @ 25º: 49 inches If tractor is not equipped with Mid (1245mm) Mount PTO, order appropriate kit from Broom diameter: 22 inches (560mm) tractor Parts Division Supplied Brush type: Wafer Accessories chart. Bristle material: Polypropylene Manual angling: Standard (NOTE: On CVT version tractors, Angling range: 0 to 25º Mid Mount PTO is only available as Drive system: PTO to Gearbox to a factory installed option.) #50 HD chain Storage stand: Standard FOR FARMALL 31-50 TRACTORS:

TRACTOR MUST BE EQUIPED WITH Model BR172: MID MOUNT VALVE AND JOYSTICK in (FOR FARMALL 31, 35, 40, 45 & 50) order to operate loaders, front mount Quick attach design, Mid-PTO driven brooms, front mount blades or Sweeping width: 67 inches (1702mm) front mount snow blowers. Sweeping width @ 25º: 60 inches (1525mm) If tractor was not ordered "Loader Broom diameter: 22 inches (560mm) Ready" please consult the Compact Bristle material: Polypropylene Tractor Parts Division Supplied Brush type: Wafer Accessories chart for valve and Manual angling: Standard joystick ordering information. Angling range: 0 to 25º Drive system: PTO to Gearbox to FOR FARMALL B TRACTORS: #50 HD chain Tractor comes equipped with Storage stand: Standard Mid-mount valve and Joystick as

standard equipment Model BR172: (FOR FARMALL 30B, 35B, 40B & 50B) Quick attach design, Mid-PTO driven Sweeping width: 67 inches (1702mm) Sweeping width @ 25º: 60 inches (1525mm) Broom diameter: 22 inches (560mm) Bristle material: Polypropylene Brush type: Wafer Manual angling: Standard Angling range: 0 to 25º Drive system: PTO to Gearbox to #50 HD chain Storage stand: Standard

-CP1C 01 014 000 01-SEP-114=



-CP1C 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price BR160 ROTARY BROOM BR160 FOR FARMALL 31-50 500 LB 9003252P48 $4,224.00 BR172 ROTARY BROOM BR172 FOR FARMALL 31-50 500 LB 9003663P66 $4,758.00 BR172 FARMALL B BR172 FOR FARMALL B 500 LB 9003663P66 $4,758.00



SUBFRAME AND HITCH

SD_N5701 HITCH AND SUBFRAME XN5701X No front mounting brackets No Charge 715425 Front quick hitch - Class 2

For Farmall 31 and 35 318 LB 9001106P49 $1,437.00

717751 Front quick hitch - Class 3 For Farmall 40 and 45 (HST or CVT) and Farmall 50 (CVT)

9001451P45 $1,885.00

717989 Front quick hitch 30/35/40/50 For Farmall 30B, 35B, 40B and 50B

9001258P95 $1,635.00

DRIVE COMPLETION KITS

SD_03007 MID PTO DRIVE KIT X03007X No Selection No Charge 715584 Drive completion kit 715584

For Farmall 31 and 35 35 LB 9000602P91 $783.00

717155 MID PTO Drive Kit-III For Farmall 40 and 45 - HST Only

7 LB 9000514P36 $668.00

717761 MID PTO Drive Kit-III AT For Farmall 40, 45 and 50 - CVT only

9000514P36 $668.00

717990 MID PTO 30/35/40/50 For Farmall 30B, 35B, 40B and 50B

9000670P67 $871.00

HYDRAULIC ANGLING KIT

SD_20087 HYDRAULIC FRAME ANGLING KIT X20087X No hydraulic angling kit No Charge

-CP1C 01 014 000 01-SEP-114k



-CP1C 01

715677 Hydraulic angling kit 26 LB 9000472P78 $614.00

SIDE CASTERWHEELS KIT

SD_29035 SIDE CASTER WHEEL KIT X29035X No side casterwheels kit No Charge 717231 Side casterwheels kit

2 x 6 47 LB 9000401P94 $522.00

OPERATOR'S MANUAL




-CP1C 01 014 000 01-SEP-114q



-CP1C 01



Quick Hitch and Subframe 715425026 Subframe Cls 2

Quick hitch and subframe for Farmall 31 and 35 236 LB 9001134P21 $1,473.00

717751006 SUBFRAME CLS 3 Quick hitch and subframe for Farmall 40, 45 (HST or CVT) and Farmall 50 (CVT)

510 LB 9001450P68 $1,884.00

717989006 SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B

350 LB 9001258P95 $1,635.00

Mid PTO Drive Completion Kits 715584006 ATTACHMENT, MID PTO DRIVE 60"

Mid PTO drive kit For Farmall 31 and 35 25 LB 9000602P91 $783.00

717155016 MID PTO Drive Kit Cls 3 For Farmall 40 and 45 with HST only

1 LB 9000513P59 $667.00

717761006 MID PTO Drive Kit Cls 3 AT For Farmall 40, 45 and 50 - CVT only

30 LB 9000513P59 $667.00

717990006 MID PTO 30/35/40/50 HP Mid PTO drive kit for Farmall 30B, 35B, 40B and 50B

30 LB 9000670P67 $871.00

Additional Attachments 717231016 2 X 6 side caster w/Wheel kit

For BR160 and BR172 47 LB 9000446P60 $580.00

715677016 HYD ANGLING 60&72"(2.0,3.0) For Farmall 30, 35, 40, 45, 50 and Farmall 30B, 35B, 40B and 50B

10 LB 9000472P78 $614.00

715655036 Ballasting box for 3-point hitch (Category I) capacity of 400 lbs., for total maximum weight of 500 lbs, (For Farmall 31 - 50 tractors and Farmall B tractors) - Ex Works Wholegoods Depot. This item must be placed on a separate order. Items ordered under Other Equipment Section can not also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quanities are required.

101 LB 9000170P94 $222.00

-CP1C 01 014 000 01-SEP-1175


TL SERIES ROTARY TILLERSUS PRICE LIST

-CP1K 01

Standard Equipment

TL152: TL172: Recommended for use on Recommended for use on (Farmall 31 and 35 and (Farmall 31 and 35 and Farmall 30B and 35B) Farmall 30B and 35B) Approximate working width: 52 inches Approximate working width: 72 inches (1320mm) (1830mm) Tilling depth adjustment with guide Tillage depth adjustment with guide shoes: 0 to 4.5 inches (0 to 114mm) shoes: 0 to 4.5 inches (1 to 114mm) Maximum tilling depth without guide Maximum tillage depth without guide shoes: 7.25 inches (184mm) shoes: 7.25 inches (184mm) Hitch: Category I Hitch: Category I Offset Adjustment to Right: 11 inches Offset Adjustment to Right: 11 inches (280mm) (280mm) PTO hp Rating: 45 PTO hp Rating: 45 Rotor Drive Type: Chain Rotor Drive Type: Chain Drive Protection: Slip Clutch Drive Protection: Slip Clutch Rotor Speed @ 540 RPM PTO: 231 RPM Rotor Speed at 540 RPM PTO: 236 RPM Number of Blades: 24 Number of Blades: 36 Blade Tip Speed @ 540 RPM: Blade Tip Speed @ 540 RPM: 1043(FPM) 1063 (FPM)

TL160: TL172H: Recommended for use on Recommended for use on (Farmall 31 and 35 and (Farmall 40, 45, 50, 55 and 60 and Farmall 30B and 35B) Farmall 40B and 50B) Approximate working width: 60 inches Approximate working width: 72 inches (1524mm) (1830mm) Tilling depth adjustment with guide Tilling depth adjustment with guide shoes: 0 to 4.5 inches (0 to 114mm) shoes: 0 to 5 inches (0 to 127mm) Maximum tilling depth without guide Maximum tillage depth without guide shoes: 7.25 inches (184mm) shoes: 7 inches (178mm) Hitch: Category I Hitch: Category I or II Offset Adjustment to Right: 11 inches Offset Adjustment to Right: 11 inches (280mm) (280mm) PTO hp Rating: 45 PTO hp Rating: 60 Rotor Drive Type: Chain Rotor Drive Type: Gear Drive Protection: Slip Clutch Drive Protection: Slip Clutch Rotor Speed @ 540 RPM PTO: 236 RPM Rotor Speed @ 540 RPM PTO: 211 RPM Number of Blades: 28 Number of Blades: 36 Blade Tip Speed @ 540 RPM: Blade Tip Speed @ 540 RPM: 1063 (FPM) 944 (FPM)

-CP1K 01 014 000 01-SEP-117?



-CP1K 01

Standard Equipment

TL180H: TL180H: (continued) Recommended for use on Offset Adjustment to Right: 11 inches (Farmall 40, 45, 50, 55, and 60, (280mm) Farmall 40B and 50B PTO hp Rating: 60 and Farmall 65C tractors) Rotor Drive Type: Gear Approximate working width: 80 inches Drive Protection: Slip Clutch (2032mm) Rotor Speed @ 540 RPM PTO: 211 RPM Tillage depth adjustment with guide Number of Blades: 40 shoes: 0 to 5 inches (0 to 127mm) Blade Tip Speed @ 540 RPM: Maximum tillage depth without guide 944 (FPM) shoes: 7 inches (178mm) Hitch: Category I or II

-CP1K 01 014 000 01-SEP-1174



-CP1K 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price TL152 52IN ROT TILL TLX152 52IN CHAIN D 1,000 LB 9001915P76 $2,488.00 TL160 60IN ROT TILL TLX160 60IN CHAIN D 1,000 LB 9002062P06 $2,678.00 TL172 72IN ROT TILL TLX172 72IN CHAIN D 1,000 LB 9002328P48 $3,024.00 TL172H 72IN ROT TILL TL172H 72IN HD GEAR 1,000 LB 9002640P33 $3,429.00 TL180H 80IN ROT TILL TL180H 80IN HD GEAR 1,200 LB 9002828P98 $3,674.00



OPERATOR'S MANUAL




-CP1K 01 014 000 01-SEP-1177

(Ex Works - See Standard Equipment)

BM SERIES FRONT MOUNTED BLADES -BM1US PRICE LIST

-CP1L 01

Standard Equipment

BM172 (FOR FARMALL 31 AND 35): REQUIREMENTS FOR OPERATION: Quick attach design FOR FARMALL 31-50 TRACTORS: Moldboard width: 72 inches (1830mm) TRACTOR MUST BE EQUIPED WITH Moldboard height 22 inches (560mm) MID MOUNT VALVE AND JOYSTICK in Reversible cutting edge order to operate loaders, front mount Cutting edge thickness: 0.5 inch brooms, front mount blades or front (12.7mm) mount snow blowers. Hydraulic angling Angling range: 0 to 30 degrees If tractor was not ordered Adjustable skid shoes "Loader Ready" please consult the

Compact Tractor Parts Division BM172H HEAVY DUTY: Supplied Accessories chart for (FOR FARMALL 40, 45 AND 50 and valve and joystick ordering information. FARMALL 30B, 35B, 40B AND 50B) Quick attach design FOR FARMALL B TRACTORS: Moldboard width: 72 inches (1830mm) Tractor comes equipped with Moldboard height: 22 inches (560mm) Mid-mount valve and Joystick as Reversible cutting edge standard equipment Cutting edge thickness: 0.5 inch (12.7mm) EX WORKS: Hydraulic angling Wholegoods Angling range: 0 to 30 degrees (Ex Works Wholegoods Depot) Adjustable skid shoes Standard Factory Attachments

(Ex Works Wholegoods Depot) BM184H HEAVY DUTY: (FOR FARMALL 40, 45 AND 50 and FARMALL 40B AND 50B) Quick attach design Moldboard width: 84 inches (2135mm) Moldboard height: 22 inches (560mm) Reversible cutting edge Cutting edge thickness: 0.5 inch (12.7mm) Hydraulic angling Angling range: 0 to 30 degrees Adjustable skid shoes

-CP1L 01 014 000 01-SEP-1176



-CP1L 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price BM172 FR BLADE CL2 BM172 72IN FRNT BL 300 LB 9001694P77 $2,201.00 BM172H FR BLADE CL3 BM172H 72IN HD FRNT 300 LB 9001998P15 $2,595.00 BM184H FR BLADE CL3 BM184H 84IN HD FRNT 300 LB 9002395P47 $3,111.00



SUBFRAME AND HITCH



717751 Front quick hitch - Class 3 For Farmall 40, 45 (HST and CVT) and Farmall 50 (CVT)

9001451P45 $1,885.00


9001258P95 $1,635.00

OPERATOR'S MANUAL




OTHER EQUIPMENT

SD_40002 BALLAST BOX X40002X No ballasting box No Charge

-CP1L 01 014 000 01-SEP-117<



-CP1L 01

717746 Ballasting box - 500 lbs. For 3-pt hitch

100 LB 9000174P79 $227.00

SD_50091 RUBBER BLADE EDGE X50091X No rubber cutting edge No Charge 715679 Rubber cutting edge 61 LB 9000187P88 $244.00

-CP1L 01 014 000 01-SEP-117=



-CP1L 01





717751006 SUBFRAME CLS 3 Quick hitch and subframe for Farmall 40, 45 (HST and CVT) and Farmall 50 (CVT)

510 LB 9001450P68 $1,884.00


350 LB 9001258P95 $1,635.00

Additional Attachments 715679026 Rubber Cutting Edge

For BM172 and BM172H 60 LB 9000187P88 $244.00


101 LB 9000170P94 $222.00

-CP1L 01 014 000 01-SEP-117k



-CP1L 02

Standard Equipment

BM184 (FOR FARMALL 55 AND 60): REQUIREMENTS FOR OPERATION: Moldboard Width: 84 inch (2135mm) TRACTOR MUST BE EQUIPED WITH Moldboard Height: 20 inch (508mm) MID MOUNT VALVE AND JOYSTICK in Reversible Cutting Edge order to operate loaders, front mount Cutting Edge: 0.5 inch (12.7mm) brooms, front mount blades or front x 6 in. (152mm) mount snow blowers. Blade Lift Height: 10 inch (254mm) Digging Depth: 4.25 inches (108mm) If tractor was not ordered Maximum Blade Angle: 30° "Loader Ready" please consult the Hydraulic Angle Blade Kit is Compact Tractor Parts Division standard equipment Supplied Accessories chart for

valve and joystick ordering information.

EX WORKS: Wholegoods (Ex Works Sioux Falls, SD)

-CP1L 02 014 000 01-SEP-117q



-CP1L 02

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price BM184 FR BLADE CL4 BM184 84IN HD FRNT 300 LB 9000595P21 $773.00



SUBFRAME AND HITCH

SD_N5701 HITCH AND SUBFRAME 715423 Front Quick Hitch/Subframe5423


OPERATOR'S MANUAL




OTHER EQUIPMENT

SD_40002 BALLAST BOX X40002X No ballasting box No Charge 717746 Ballasting box - 500 lbs.

For 3-pt hitch 100 LB 9000174P79 $227.00

-CP1L 02 014 000 01-SEP-1185


BS SERIES FRONT MOUNT SNOW BLOWERSUS PRICE LIST

-CP1M 01

Standard Equipment

BS163H HEAVY DUTY: BS172H HEAVY DUTY: For use with Farmall 31 and 35 ONLY For use with: Quick attach design, mid-PTO driven Farmall 40, 45, and 50 ONLY Overall width: 63 inches (1600mm) Quick attach design, mid-PTO driven Cutting width: 63 inches (1600mm) Overall width: 72 inches (1830mm) Cutting height: 22 inches (560mm) Cutting width: 72 inches (1830mm) Number of blades: 4 Cutting height: 26 inches (660mm) Fan diameter: 18 inches (457mm) Number of blades: 4 Auger diameter: 14 inches (356mm) Fan diameter: 24 inches (610mm) Impeller drive: Gear box reduction Auger diameter: 15 inches (381mm) Auger Drive: Two-part chute with Impeller drive: Gear box reduction/ manual chute rotation #60 HD chain Shearbolt protection Auger Drive: Two-part chute with Adjustable skid shoes manual chute rotation Front mount and drive completion Shearbolt protection package. Includes chute with Adjustable skid shoes mechanical rotation, female Front mount and drive completion portion of quick hitch and package. Includes chute with front half of driveline. mechanical rotation, female

portion of quick hitch and BS163B HEAVY DUTY: front half of driveline. For use with Farmall 30B, 35B, 40B and 50B Tractors ONLY BS174H HEAVY DUTY: Quick attach design, mid-PTO driven For use with Farmall 30B, 35B, Overall width: 63 inches (1600mm) 40B and 50B Tractors ONLY Cutting width: 63 inches (1600mm) Quick attach design, mid-PTO driven Cutting height: 22 inches (560mm) Overall width: 72 inches (1830mm) Number of blades: 4 Cutting width: 72 inches (1830mm) Fan diameter: 18 inches (457mm) Cutting height: 26 inches (660mm) Auger diameter: 14 inches (356mm) Number of blades: 4 Impeller drive: Gear box reduction Fan diameter: 24 inches (610mm) Auger Drive: Two-part chute with Auger diameter: 15 inches (381mm) manual chute rotation Impeller drive: Gear box reduction/ Shearbolt protection #60 HD chain Adjustable skid shoes Auger Drive: Two-part chute with Front mount and drive completion manual chute rotation package. Includes chute with Shearbolt protection mechanical rotation, female Adjustable skid shoes portion of quick hitch and Front mount and drive completion front half of driveline. package. Includes chute with

mechanical rotation, female portion of quick hitch and front half of driveline.

-CP1M 01 014 000 01-SEP-118?



-CP1M 01

Standard Equipment

REQUIREMENTS FOR OPERATION: If tractor was not ordered TRACTOR MID MOUNT PTO IS "Loader Ready" please consult the REQUIRED. If tractor is not equipped Compact Tractor Parts Division with Mid Mount PTO, order appropriate Supplied Accessories chart kit from tractor Parts Division Supplied for valve and joystick ordering Accessories chart. information.

(Note: On CVT version tractors, FOR FARMALL B TRACTORS: Mid Mount PTO is only available as a Tractor comes equipped with factory installed option.) Mid-mount valve and Joystick as

standard equipment FOR FARMALL 31-50 TRACTORS: TRACTOR MUST BE EQUIPED WITH MID MOUNT VALVE AND JOYSTICK in order to operate loaders, front mount brooms, front mount blades or front mount snow blowers.

-CP1M 01 014 000 01-SEP-1184



-CP1M 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price BS163H FARMALL B BS163H 63IN 9003870P79 $5,027.00 BS163H SNOW BLOWER BS163H 63IN COMM HD 900 LB 9003078P46 $3,998.00 BS172H SNOW BLOWER BS172H 72IN COMM HD 900 LB 9003635P94 $4,722.00 BS174H FARMALL B BS174H 74IN 900 LB 9005052P74 $6,562.00



SUBFRAME AND HITCH



717751 Front quick hitch - Class 3 For Farmall 40, 45 (HST or CVT) and 50 CVT

9001451P45 $1,885.00


9001258P95 $1,635.00

FRONT MOUNTED DRIVE COMPLETING PACKAGE

SD_03007 MID PTO DRIVE KIT X03007X No Selection No Charge 715584 Drive completion kit 715584

For Farmall 31 and 35 35 LB 9000602P91 $783.00

717155 MID PTO Drive Kit-III For Farmall 40 and 45 - HST only

7 LB 9000514P36 $668.00

717761 MID PTO Drive Kit-III AT For Farmall 40, 45 and 50 - CVT Only

9000514P36 $668.00

717990 MID PTO 30/35/40/50 For Farmall 30B, 35B, 40B and 50B

9000670P67 $871.00

-CP1M 01 014 000 01-SEP-1187



-CP1M 01

FRONT MOUNTED FINAL DRIVE COMPLETION

SD_29042 SNOW BLR CONFIG PKG 715346 Finishing package 63"

Front mount completion kit for Farmall 31 and 35 and for Farmall 30B, 35B, 40B and 50B

232 LB No Charge

715339 Finishing package 72"/74" Front mount completion kit for: Farmall 40 and 45 (HST or CVT) Farmall 50 (CVT) and Farmall 30B, 35B, 40B and 50B

220 LB No Charge

3 PART CHUTE

SD_29036 3 PART CHUTE X29036X No 3 part chute No Charge 715345 3 Part chute 49 LB 9000309P54 $402.00

DRIFT CUTTER KIT

SD_50028 DRIFT CUTTER KIT X50028X No drift cutter No Charge 716248 Drift cutter 28 LB 9000107P03 $139.00

ELECTRIC CHUTE DEFLECTOR

SD_29038 ELEC CHUTE DEFLECT X29038X No electric chute deflector No Charge 715344 Electric chute deflector 8 LB 9000706P86 $918.00

HYDRAULIC CHUTE DEFLECTOR

SD_20101 HYDRAULIC CHUTE DEF X20101X No hydraulic chute deflector No Charge 716864 Hydraulic chute deflector 16 LB 9000321P86 $418.00

-CP1M 01 014 000 01-SEP-1188



-CP1M 01

HYDRAULIC CHUTE ROTATION

SD_20088 HYDRAULIC CHUTE ROT X20088X No Hydraulic Chute Rotation No Charge 717172 Hydraulic chute rotation 11 LB 9000719P18 $934.00

OPERATOR'S MANUAL




OTHER EQUIPMENT

SD_40002 BALLAST BOX X40002X No ballasting box No Charge 717746 Ballasting box - 500 lbs.

for 3-pt hitch 100 LB 9000174P79 $227.00

-CP1M 01 014 000 01-SEP-1186



-CP1M 01





717751006 SUBFRAME CLS 3 Quick hitch and subframe for Farmall 40, 45 (HST or CVT) and Farmall 50 (CVT)

510 LB 9001450P68 $1,884.00


350 LB 9001258P95 $1,635.00

Mid PTO Drive Completion Kits 715584006 ATTACHMENT, MID PTO DRIVE 60"

Mid PTO drive kit For Farmall 31 and 35 25 LB 9000602P91 $783.00

717155016 MID PTO Drive Kit Cls 3 For Farmall 40 and 45 with HST only

1 LB 9000513P59 $667.00

717761006 MID PTO Drive Kit Cls 3 AT For Farmall 40 and 45, CVT only

30 LB 9000513P59 $667.00

717990006 MID PTO 30/35/40/50 HP For Farmall 30B, 35B, 40B and 50B

30 LB 9000670P67 $871.00

Additional Attachments 715344006 Electric chute deflector

For BH163H, BH163B, BH172H or BH174H 15 LB 9000707P63 $919.00

716864026 Hyd chute deflector For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H

15 LB 9000321P86 $418.00

717172016 HYDRAULIC CUTE ROTATION KIT For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H

10 LB 9000718P41 $933.00

715345006 3 Part Chute For BH163H, BH163B, BH172H or BH174H

45 LB 9000309P54 $402.00

715346006 ATTACHMENT, FRT MTG COMP. Front mount completion kit (63") for Farmall 31 and 35 and also for Farmall 30B, 35B, 40B and 50B

205 LB 9001184P26 $1,538.00

715339006 FRONT PACKAGE Front mount completion kit (72") for Farmall 40, 45, and 50 and also (74") for Farmall 30B, 35B, 40B and 50B

128 LB 9001184P26 $1,538.00

716248006 Drift Cutter For BS172H or BH174H

28 LB 9000107P80 $140.00


101 LB 9000170P94 $222.00

-CP1M 01 014 000 01-SEP-118<


BS SERIES REAR MOUNT SNOW BLOWERSUS PRICE LIST

-CP1M 02

Standard Equipment

BS164R: BS184R: For use on Farmall 31 and 35 For use on 3-point mounted, two-stage, Farmall 40, 45, 50, 55 and 60, rear PTO driven and Farmall 65C tractors Overall width: 64 inches (1625mm) 3-point mounted, two-stage, Cutting width: 64 inches (1625mm) rear PTO driven Cutting height: 26 inches (660mm) Overall width: 84 inches (2135mm) Number of blades: 4 Cutting width: 84 inches (2135mm) Fan diameter: 24 inches (610mm) Cutting height: 34 inches (660mm) Auger diameter: 15 inches (381mm) Number of blades: 4 Auger drive: #60 chain Fan diameter: 28 inches (711mm) Manual or hydraulic chute Auger diameter: 20 inches (508mm) rotation optional Auger drive: #60 chain Shearbolt protection Manual or hydraulic chute Adjustable skid shoes rotation optional Hitch, Driveline, Chute Shearbolt protection Manual chute rotation kit Adjustable skid shoes

Hitch, Driveline, Chute BS174R: Manual chute rotation kit For use on Farmall 31, 35, 40, 45, 50, 55 and 60 3-point mounted, two-stage, rear PTO driven Overall width: 74 inches (1880mm) Cutting width: 74 inches (1880mm) Cutting height: 26 inches (660mm) Number of blades: 4 Fan diameter: 24 inches (610mm) Auger diameter: 15 inches (381mm) Auger drive: #60 chain Manual or hydraulic chute rotation optional Shearbolt protection Adjustable skid shoes Hitch, Driveline, Chute Manual chute rotation kit

-CP1M 02 014 000 01-SEP-118=



-CP1M 02

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price BS164R SNOW BLOWER BS164R 64IN CAT 1 3 900 LB 9002458P61 $3,193.00 BS174R SNOW BLOWER BS174R 74IN CAT 1 3 900 LB 9003213P21 $4,173.00 BS184R SNOW BLOWER BS184R 84IN CAT 1 3 900 LB 9003853P85 $5,005.00



FRONT MOUNTED FINAL DRIVE COMPLETION

SD_29042 SNOW BLR CONFIG PKG 715343 Manual chute rotation kit 26 LB No Charge 715342 Hydraulic chute rotation kit

Hoses not included, One tractor rear remote valve is required for operation. Please consult the appropriate Tractor Model Price List for valve ordering information.

80 LB 9000212P52 $276.00

OPERATOR'S MANUAL




-CP1M 02 014 000 01-SEP-118k



-CP1M 02


Order Code Description Weight Factory Data List Price 715342036 HYD ROTATION 64IN 52 LB 9000365P75 $475.00 715342046 HYD ROTATION 74-84IN 73 LB 9000365P75 $475.00 715343046 MANUAL ROTATION 64-74-84IN 9 LB 9000153P23 $199.00

-CP1M 02 014 000 01-SEP-118q

(Ex Works Sioux Falls, SD)

BH SERIES BACKHOESUS PRICE LIST

-CP1N 01

Standard Equipment

BH90 (7.5 FT DIGGING DEPTH): BH102 (8.5 FT DIGGING DEPTH): For Farmall 31-60, For Farmall 31-60, Farmall 45A, 55A, and Farmall 45A, 55A, and Farmall 30B, 35B, 40B, 50B and Farmall 30B, 35B, 40B and 50B and Farmall 65C-95C, and Farmall 65C-95C, and Farmall 85U-105U Farmall 85U-105U

SPECIFICATONS: SPECIFICATONS: Digging Depth: 89.9 inches (2283mm) Digging Depth: 102 inches (2590mm) Reach from Swing Pivot: 123 inches Reach from Swing Pivot: 134 inches (3124mm) (3404mm) Transport Height: 79 inches (2007mm) Transport Height: 84.7 inches Bucket Rotation: 180º (2151mm) Stabilizer Spread - Transport: 54 inches Bucket Rotation: 180º (1372mm) Stabilizer Spread - Transport: 53 inches Stabilizer Spread - Operating: 79 inches (1346mm) (2007mm) Stabilizer Spread - Operating: 91 inches Swing Arc: 180º (2311mm) Digging force - Bucket: 2827 lbs Swing Arc: 180º (1282 kg) Digging force - Bucket: 4100 lbs Digging force - Dipper: 2020 lbs (1860 kg) (916 kg) Digging force - Dipper: 2130 lbs Operating Pressure - 2150 psi (966 kg) Boom Cylinder - 2.75 x 16.75 in. Operating Pressure - 2500 psi Dipperstick Cylinder - 3.00 x 14.00 in. Boom Cylinder - 2.75 x 16.75 in. Bucket Cylinder - 2.00 x 19.25 in. Dipperstick Cylinder - 2.75 x 16.75 in. Swing Cylinder - 2.25 x 8.97 in. Bucket Cylinder - 2.25 x 19.25 in. Stabilizer Cylinder - 2.25 x 10.66 in. Swing Cylinder - 2.25 x 8.97 in.

Stabilizer Cylinder - 2.25 x 14.00 in. Farmall 31-60, Farmall A and Farmall B include Hydraulic Kit Farmall 31-60, Farmall A and

Farmall B include Hydraulic Kit Specifications vary with tractor model, hydraulic system, tire size, etc. Specifications vary with tractor model,

hydraulic system, tire size, etc.

-CP1N 01 014 000 01-SEP-116?



-CP1N 01

Standard Equipment

BH114 (9.5 FT DIGGING DEPTH): Specifications vary with tractor model, For Farmall 55 and 60, hydraulic system, tire size, etc. Farmall 65C-95C, and Requirements for Operation: Farmall 85U-105U The tractor must be equipped with a

front end loader* when installing a SPECIFICATIONS: BH Series backhoe. Digging Depth: 113.5 inches (2883mm) Reach from Swing Pivot: 149 inches * The following front blade / tractor (3785mm) combination may be used in lieu Transport Height: 96 inches (2438mm) of a loader when installing a Bucket Rotation: 180º BH Series backhoe: Stabilizer Spread - Transport: 53 inches Farmall 31 or 35 plus a BM172 Blade (1346mm) Farmall 40, 45 or 50 plus a BM172H or Stabilizer Spread - Operating: 91 inches BM184H Blade (2311mm) Farmall 55 or 60 plus a BM184 Blade Swing Arc: 180º Farmall 30B or 35B plus a Digging force - Bucket: 4100 lbs BM172H Blade (1860 kg) Farmall 40B or 50B plus a Digging force - Dipper: 2670 lbs BM184H Blade (1211 kg) Operating Pressure - 2500 psi Boom Cylinder - 3.00 x 18.5 in. Dipperstick Cylinder - 3.00 x 19.75 in. Bucket Cylinder - 2.25 x 19.25 in. Swing Cylinder - 2.25 x 8.97 in. Stabilizer Cylinder - 2.25 x 14.00 in.

Farmall 55 and 60 includes hydraulic kit

-CP1N 01 014 000 01-SEP-1164



-CP1N 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price BH90 BACKHOE BH90 90 IN 1,200 LB 9005849P69 $7,597.00 BH102 BACKHOE BH102 102 IN 12,000 LB 9007031P64 $9,132.00 BH114 BACKHOE BH114 114 IN 1,200 LB 9009607P29 $12,477.00



SUBFRAMES

SD_39024 UPPER LINK CAT I OR X39024X No 3-Point link Category II No Charge 716495 3-Point link Category II

Must be ordered for Category II 3-point applications on Farmall C and Farmall U tractors. Used with BH90, BH102, and BH114 backhoes.

145 LB 9000406P56 $528.00

SD_N5701 HITCH AND SUBFRAME XN5701X No front mounting brackets No Charge 717977 Front Quick Hitch - Class 2

Subframe for Farmall 31 and 35 tractors For use with BH90 and BH102 backhoes

9000510P51 $663.00

715451 Front mounting brackets 715451 Subframe for Farmall 40, 45 and 50 tractors with gear and HST For use with BH90 and BH102 backhoes.

1,200 LB 9000590P59 $767.00

717751 Front quick hitch - Class 3 Subframe for Farmall 40, 45, and 50 tractors with CVT For use with BH90 and BH102 backhoes

9000590P59 $767.00

716394 Subframe 716394 For Farmall 55 and 60 tractors For BH90, BH102, and BH114 backhoes

659 LB 9000605P22 $786.00

717912 Subframe Wrkmstr45/55-FarmallA For Farmall 45A and 55A tractors only For BH90 and BH102 backhoes only

9000605P22 $786.00

717972 Subframe CL2 30/35 For Farmall 30B and 35B tractors only For BH90 and BH102 backhoes only

9000501P27 $651.00

-CP1N 01 014 000 01-SEP-1167



-CP1N 01

717973 Subframe CL3 40/50 For Farmall 40B and 50B tractors only For BH90 and BH102 backhoes only

9000590P59 $767.00

HYDRAULIC KITS

SD_20078 HOSE KIT X20078X No hydraulic hose kit No Charge 715743 MMV Hydraulic Hose Kit- 2 func

For Farmall C and Farmall U tractors. Requires use of one tractor rear remote valve spool with quick couplers. Used with BH90, BH102, and BH114 backhoes.

55 LB 9000115P50 $150.00

SD_20102 HYDRAULIC KIT X20102X No rear hitch hydraulic pkg (900193P27) ($251.00) 715396 Hydraulic kit

For Farmall 31 and 35 tractors 18 LB No Charge

715431 Hydraulic valve kit For Farmall 40, 45 and 50 tractors

37 LB No Charge

715392 Hydraulic kit For Farmall 55 and 60 tractors

20 LB No Charge

717914 Hyd kit Wrkmstr45/55-FarmallA For Farmall 45A and 55A tractors only For BH90 and BH102 backhoes only

No Charge

717974 HYD Kit CL2 30/35 HP For Farmall 30B and 35B tractors only For BH90 and BH102 backhoes only

9000126P28 $164.00

717975 HYD CL3 40/50 HP GEA For Farmall 40B and 50B Gear tractors only For BH90 and BH102 backhoes only

9000193P27 $251.00

717976 HYD CL3 40/50 HP HST For Farmall 40B and 50B HST tractors only For BH90 and BH102 backhoes only

9000193P27 $251.00

BUCKET

SD_N5401 9 IN STD BUCKET XN5401X No 9 In Std. Bucket No Charge 716398 9 in./229mm standard bucket

2 teeth, .87 cu. ft. heaped. 74 LB 9000249P48 $324.00

SD_N5403 12 IN STD BUCKET XN5403X No 12 in std Bucket No Charge

-CP1N 01 014 000 01-SEP-1168



-CP1N 01

716399 12 in./305mm standard bucket 3 teeth, 1.24 cu. ft. heaped

107 LB 9000364P98 $474.00

SD_N5404 16 IN HD BUCKET XN5404X No 16 in HD Bucket No Charge 716494 16 in./406mm heavy-duty bucket

3 teeth, 1.76 cu. ft. heaped 171 LB 9000403P48 $524.00

SD_N5407 18 IN STD BUCKET XN5407X No 18 in. Standard Bucket No Charge 716434 18 in./457mm standard bucket


SD_N5408 24 IN HD BUCKET XN5408X No 24 Inch HD Bucket No Charge 716493 24 in./609mm heavy-duty bucket

5 teeth, 2.82 Cu. Ft. heaped 214 LB 9000472P01 $613.00

SD_N5410 36 IN GRAVE BUCKET XN5410X No 36 in. grave bucket No Charge 716435 36 in./914 mm grave bucket


SD_N5411 36 IN MUCK BUCKET XN5411X No 36 in. muck bucket No Charge 716436 36 in./914 mm muck bucket


FACTORY SUPPLIED ACCESSORIES - IMPLEMENTS FORCOMPACT/MIDRANGE TRACTORS

SD_50005 BIG FOOT DIRT PADS X50005X No big foot dirt pads No Charge 716525 Big foot dirt pads

12 in. square 65 LB 9000117P81 $153.00

SD_50092 RUBBER STREET PADS X50092X No rubber street pads No Charge 716410 Rubber street pads 18 LB 9000169P40 $220.00

OPERATOR'S MANUAL


-CP1N 01 014 000 01-SEP-1166



-CP1N 01



OTHER EQUIPMENT

SD_03008 PTO PUMP AND RESERV X03008X No PTO pump and reservoir No Charge 716411 PTO pump and reservoir

11.0 GPM PTO pump. For use with BH114 backhoe on Farmall C and Farmall U tractors.

133 LB 9001007P16 $1,308.00

SD_N6413 MECH THUMB XN6413X No mechanical thumb No Charge 717916 Mechanical thumb

For BH90, BH102, and BH114 backhoe buckets 9000433P51 $563.00

-CP1N 01 014 000 01-SEP-116<



-CP1N 01



Subframes 717977006 FRONT QCK HITCH CL2

For Farmall 31 and 35 tractors For use with BH90 and BH102 backhoes.

268 LB 9000511P28 $664.00

715451156 SUBFRAME FOR CL3 For Farmall 40 and 45 tractors - HST only

256 LB 9000589P82 $766.00

717751016 SUBFRAME CLS 3 AT Subframe for tractors with Constantly Variable Transmission (CVT)only

510 LB 9000589P82 $766.00

716394036 SUBFRAME FOR NHW STYLED CL4 For Farmall 55 and 60 Tractors

220 LB 9000605P99 $787.00

717912006 SUBFRAME TT/FARMALL A For Farmall 45A and 55A tractors

320 LB 9000647P57 $841.00

717972006 SUBFRAME CLS 2 30/35 HP For Farmall 30B and 35B tractors

315 LB 9000501P27 $651.00

717973006 SUBFRAME CLS 3 40/50 HP For Farmall 40B and 50B tractors

320 LB 9000590P59 $767.00

716495026 UPPER LINK CAT I OR CAT II 3-P Must be ordered for 3-point applications on Farmall C and Farmall U Tractors (used with BH114 only)

145 LB 9000406P56 $528.00

Hydraulic Kits 715396026 HYD KIT FOR CLS 2

For Farmall 31 and 35 tractors 12 LB 9000193P27 $251.00

715431026 HYD SNGL LEVR FAR 31& 35 Hydraulic kit for Farmall 40, 45, and 50 tractors

12 LB 9000193P27 $251.00

715392016 HYD KIT FOR CLS 4 Hydraulic kit for Farmall 55 and 60 tractors

12 LB 9000193P27 $251.00

717914006 HYD KIT TT/FARMALL A For Farmall 45A and 55A tractors

20 LB 9000200P97 $261.00

717974006 HYD KIT CLS 2 30/35 HP For Farmall 30B and 35B tractors

315 LB 9000126P28 $164.00

717975006 HYD KIT CLS 3 40/50 HP GEAR For Farmall 40B and 50B Gear tractors

35 LB 9000193P27 $251.00

717976006 HYD KIT CLS 3 40/50 HP HST For Farmall 40B and 50B HST tractors

35 LB 9000193P27 $251.00

715743006 HYD. HOSE KIT For Utility tractors and larger Requires use of one tractor rear remote valve spool with quickcouplers

10 LB 9000114P73 $149.00

716411016 11.0 GPM PUMP FOR UTILITY TRAC for use with BH114 backhoe on Farmall C and Farmall U Tractors

54 LB 9001007P16 $1,308.00

Buckets BH172 Only 716398006 STD BUCKET 9" 2 TEETH

Standard .87 Cu.Ft. heaped. For BH172 only. Subject to available inventory.

46 LB 9000249P48 $324.00

-CP1N 01 014 000 01-SEP-116=



-CP1N 01

716433016 HVY DTY BUCKET 12" 3 TEETH 1.24 Cu. Ft. heaped. For BH172 only. Subject to available inventory.

72 LB 9000364P21 $473.00

716494036 HVY DTY BUCKET 16" 3 TEETH Heavy-duty 1.76 Cu. Ft. heaped. For BH172 only. Subject to available inventory.

82 LB 9000415P80 $540.00

Buckets BH90, BH102, and BH114 716398016 BUCKET-STD 9" 2 TEETH .87 CU.

Standard .87 Cu.Ft. heaped. 46 LB 9000249P48 $324.00

716399026 BUCKET-STD 12" 3 TEETH 1.24 CU Standard 1.24 Cu.Ft. heaped

72 LB 9000364P98 $474.00

716494066 BUCKET-HD 16" 3 TEETH 1.76 CU Heavy-duty 1.76 Cu. Ft. heaped

82 LB 9000403P48 $524.00

716434036 BUCKET-STD 18" 4 TEETH 2.02 CU 2.02 Cu. Ft. heaped

84 LB 9000420P42 $546.00

716493046 BUCKET-HD 24" 5 TEETH 2.82 CU Heavy-duty 2.82 Cu. Ft. heaped

86 LB 9000472P01 $613.00

716436036 BUCKET-MUCK 36" 6 TTH 4.00 CU 4.00 Cu. Ft. heaped

114 LB 9000492P80 $640.00

716435046 BUCKET-GRAVE 36" 6 TTH 4.00 CU 4.00 Cu. Ft. heaped

130 LB 9000492P80 $640.00

Additional Attachments 716525026 BIG FOOT DIRT PADS

12 in. square 52 LB 9000123P97 $161.00

716410016 STREET PAD 172,190,1102 5 LB 9000178P64 $232.00 716849006 STABILIZER HYD LOCKOUT VALVE K

For BH172 only. Subject to available inventory. 5 LB 9000376P53 $489.00

717916016 MECHANICAL THUMB 7.5/8.5/9.5 F 82 LB 9000433P51 $563.00

-CP1N 01 014 000 01-SEP-116k

(Ex Works Beaumont, TX)

RC ROTARY CUTTERSUS PRICE LIST

-CP1T 01

Standard Equipment

ROTARY CUTTER - ECONOMY ROTARY CUTTER - STANDARD DUTY (3-POINT): (3-POINT):

RC480: RC605: Cutting Width: 48 in. Cutting Width: 60 in. Cutting Height: 1 in. (min.) Cutting Height: 2 1/2 in. (min.) Cutting Capacity: 2 in. (max.) Cutting Capacity: 2 1/2 in. (max.) Blade Carrier: Pan Blade Carrier: Pan Deck Thickness: 10 gauge Deck Thickness: 7 gauge Safety Deflectors: Rear Rubber Belting Safety Deflectors: Rear Rubber Belting Driveline Size: Cat. 4 - 540 rpm Driveline Size: Cat. 4 - 540 rpm Slip Protection: Shear Pin Slip Protection: Splined Slip Clutch Tire and Wheel: Laminated Tire and Wheel: Laminated 1 spindle 1 spindle

Single tail wheel RC600: Cutting Width: 60 in. RC725: Cutting Height: 2 in. (min.) Cutting Width: 83 in. Cutting Capacity: 2 in. (max.) Cutting Height: 2 in. (min.) Blade Carrier: Pan Cutting Capacity: 2 1/2 in. (max.) Deck Thickness: 7 gauge Blade Carrier: Pan Safety Deflectors: Rear Rubber Belting Deck Thickness: 7 gauge Driveline Size: Cat. 4 - 540 rpm Safety Deflectors: Rear Rubber Belting Slip Protection: Shear Pin Driveline Size: Cat. 4 - 540 rpm Tire and Wheel: Laminated Slip Protection: Slip Clutch 1 spindle Tire and Wheel: Laminated

1 spindle RC720: Single tail wheel Cutting Width: 72 in. Cutting Height: 2 in. (min.) RC840: Cutting Capacity: 2 in. (max.) Cutting Width: 83 in. Blade Carrier: Pan Cutting Height: 2 in. (min.) Deck Thickness: 7 gauge Cutting Capacity: 2 1/2 in. (max.) Safety Deflectors: Rear Rubber Belting Blade Carrier: Pan Driveline Size: Cat. 4 - 540 rpm Deck Thickness: 7 gauge Slip Protection: Shear Pin Safety Deflectors: Rear Rubber Belting Tire and Wheel: Laminated Driveline Size: Cat. 4 - 540 rpm 1 spindle Slip Protection: Slip Clutch

Tire and Wheel: Laminated 1 spindle Single tail wheel

-CP1T 01 015 000 12-OCT-11()



-CP1T 01

Standard Equipment

ROTARY CUTTER - HEAVY DUTY ROTARY CUTTER - HEAVY DUTY (3-POINT): (3-POINT): (continued)

RC727: RC960: Cutting Width: 72 in. Cutting Width: 96 in. Cutting Height: 2 in. (min.) Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) Cutting Capacity: 3 in. (max.) Blade Carrier: Pan Blade Carrier: Pan Deck Thickness: 7 gauge Deck Thickness: 3/16 x 7 gauge Safety Deflectors: Front and Rear Safety Deflectors: Front and Rear Chains Chains Driveline Size: Cat. 5 - 540 rpm Driveline Size: Cat. 5 - 540 rpm Slip Protection: Splined Slip Clutch Slip Protection: Slip Clutch Tire and Wheel: Laminated Tire and Wheel: Laminated 1 spindle 2 spindle Single tail wheel Dual tail wheel

RC845: ROTARY CUTTER - HEAVY DUTY Cutting Width: 84 in. (PULL-TYPE): Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) RC1200: Blade Carrier: Pan Cutting Width: 120 in. Deck Thickness: 7 gauge Cutting Height: 2 in. (min.) Safety Deflectors: Front and Rear Cutting Capacity: 3 in. (max.) Chains Blade Carrier: Pan Driveline Size: Cat. 5 - 540 rpm Deck Thickness: 7 gauge Slip Protection: Splined Slip Clutch Safety Deflectors: Front and Rear Tire and Wheel: Laminated Chains 1 spindle Main Driveline: Cat. 5 CV w/ Single tail wheel Slip Clutch - 540 rpm

Tire and Wheel: Laminated RC84HD: 2 spindle Cutting Width: 84 in. Cutting Height: 2 in. (min.) Cutting Capacity: 4 in. (max.) Blade Carrier: Pan Deck Thickness: 3/16 x 7 gauge Safety Deflectors: Front and Rear Chains Driveline Size: Cat. 5 - 540 rpm Slip Protection: Slip Clutch Tire and Wheel: Laminated 1 spindle Dual tail wheel

-CP1T 01 015 000 12-OCT-11';�



-CP1T 01

Standard Equipment

ROTARY CUTTER - HEAVY DUTY REQUIREMENTS FOR OPERATION: (PULL-TYPE): (continued) Tractor Horsepower (Max.):

RC480 - up to 48 RC1800 - 540 rpm driveline: RC600 - up to 48 (Standard and RC720 - up to 48 Smooth Top/Double Deck) RC605 - up to 65 Cutting Width: 180 in. RC725 - up to 65 Cutting Height: 2 in. (min.) RC840 - up to 65 Cutting Capacity: 3 in. (max.) RC727 - up to 95 Blade Carrier: Pan RC845 - up to 95 Deck Thickness: 7 gauge RC84HD - up to 140 Safety Deflectors: Front and Rear RC960 - up to 140 Chains RC1200 - up to 150 Main Driveline: Cat. 5 CV w/ RC1800 - up to 210 Slip Clutch 540 rpm Outboard Drivelines to wings: Cat. 4 w/Slip Clutch Tire and Wheel: Laminated 3 spindle

RC1800 - 1000 rpm driveline: (Standard and Smooth Top/Double Deck) Cutting Width: 180 in. Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) Blade Carrier: Pan Deck Thickness: 7 gauge Safety Deflectors: Front and Rear Chains Main Driveline: Cat. 5 CV w/ Slip Clutch 1000 rpm - 1 3/8 in. shaft 1000 rpm - 1 3/4 in. shaft Outboard Drivelines to wings: Cat. 4 w/Slip Clutch Tire and Wheel: Aircraft (used) 3 spindle Hydraulic level lift

-CP1T 01 015 000 12-OCT-11'%�



-CP1T 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price RC480 ROTARY CUTTR 48 in. standard-duty 5,894 LB 9001114P96 $1,448.00 RC600 ROTARY CUTTR 60 in. standard-duty 781 LB 9001290P52 $1,676.00 RC720 ROTARY CUTTR 72 in. standard-duty 885 LB 9001576P19 $2,047.00 RC605 ROTARY CUTTR 60 in. medium-duty 885 LB 9001857P24 $2,412.00 RC725 ROTARY CUTTR 72 in. medium-duty 903 LB 9002094P40 $2,720.00 RC840 ROTARY CUTTR 84 in. medium-duty 1,400 LB 9002414P72 $3,136.00 RC727 ROTARY CUTTR 72 in. HD single tail 1,193 LB 9002629P55 $3,415.00 RC845 ROTARY CUTTR 84 in. HD single tail 1,193 LB 9003599P75 $4,675.00 RC84HD ROTARY CUTTR 84 in. HD dual tail 1,680 LB 9005312P23 $6,899.00 RC960 ROTARY CUTTR 96 in. HD dual tail 1,749 LB 9005882P03 $7,639.00 RC1200 ROTARY CUTTR 540 rpm, 120 in. 1,749 LB 9008077P30 $10,490.00 RC1800 540RPM 540 rpm, 180 in. 1,749 LB 9014043P26 $18,238.00 RC1800 1000RPM 1-3/8 1000 rpm 180 in.1-3/8 in. shft 5,594 LB 9016087P61 $20,893.00 RC1800 1000RPM 1-3/4 1000 rpm 180 in.1-3/4 in. shft 1,749 LB 9016087P61 $20,893.00 RC1800 540RPM DD 540rpm, 180 in. Dbl Deck 1,749 LB 9016226P98 $21,074.00 RC1800 1000 1-3/8 DD 1000rpm,180in.1-3/8 Dbl Deck 5,594 LB 9018018P77 $23,401.00 RC1800 1000 1-3/4 DD 1000rpm,180in.1-3/4 Dbl Deck 1,749 LB 9018018P77 $23,401.00



OTHER EQUIPMENT

SD_16049 EXTRA WHEELS AND TIRES X16049X No extra wheels and tires No Charge 717984 Aircraft Tires (2)

Available on RC1800 with 1000RPM driveline 9000325P71 $423.00

717985 Aircraft Tires (6) Available on RC1800 with 540RPM driveline

9000977P13 $1,269.00

717986 Aircraft Tires (8) Available on RC1800 with 540RPM driveline

9001308P23 $1,699.00

717987 Foam Filled P Tire 6 Available on all RC1800 Models

9001308P23 $1,699.00

717988 Foam Filled P Tire 8 Available on all RC1800 Models

9001650P11 $2,143.00

-CP1T 01 015 000 12-OCT-11':



-CP1T 01

SD_N6428 FRONT SAFETY CHAINS XN6428X No FR Safety Chains No Charge 717979 Front Safety Chains

Available on RC480, RC600 and RC720 9000137P83 $179.00

SD_N6429 REAR SAFETY CHAINS XN6429X No Rear Safety Chain No Charge 717980 Rear Safety Chains


SD_N6430 SLIP CLUTCH XN6430X No Slip Clutch No Charge 717981 Slip Clutch


SD_N6431 DUAL TAIL WHEEL XN6431X No Dual Tail Wheel No Charge 717982 Dual Tail Wheel

Available on RC605, RC725, RC727, RC840, RC845, and RC1800 9000395P01 $513.00

SD_N6432 HYD LIFT XN6432X No HYD Lift No Charge 717983 HYD Lift

Available on RC1800 with 540RPM driveline 9000957P11 $1,243.00

SD_N6433 COATING XN6433X No Coating No Charge 717991 Galvanized if MODEL is 84 in. medium-duty 9000079P31 $103.00 if MODEL is 60 in. standard-duty 9000079P31 $103.00 if MODEL is 72 in. medium-duty 9000079P31 $103.00 if MODEL is 48 in. standard-duty 9000079P31 $103.00 if MODEL is 60 in. medium-duty 9000079P31 $103.00 if MODEL is 72 in. standard-duty 9000079P31 $103.00 if MODEL is 84 in. HD single tail 9000197P12 $256.00 if MODEL is 72 in. HD single tail 9000197P12 $256.00 if MODEL is 540 rpm, 120 in. 9000197P12 $256.00 if MODEL is 96 in. HD dual tail 9000197P12 $256.00 if MODEL is 84 in. HD dual tail 9000197P12 $256.00 if MODEL is 540 rpm, 180 in. 9000592P13 $769.00 if MODEL is 540rpm, 180 in. Dbl Deck 9000592P13 $769.00 if MODEL is 1000 rpm 180 in.1-3/4 in. shft 9000592P13 $769.00 if MODEL is 1000 rpm 180 in.1-3/8 in. shft 9000592P13 $769.00 if MODEL is 1000rpm,180in.1-3/4 Dbl Deck 9000592P13 $769.00 if MODEL is 1000rpm,180in.1-3/8 Dbl Deck 9000592P13 $769.00

-CP1T 01 015 000 12-OCT-11'<



-CP1T 01

SD_N6436 QUICK ATTACH HITCH XN6436X No Quick Attach Hitch No Charge 439026 Quick Attach Hitch

Availiable on RC480, RC600, RC605, RC720, RC725, RC727, RC840, RC845, RC84HD, RC960

9000059P29 $77.00

-CP1T 01 015 000 12-OCT-11'*



-CP1T 01



Front Safety Chains 717979006 48" Front safety chains

Available on RC480 27 LB 9000137P83 $179.00

717979016 60" Front safety chains Available on RC600

29 LB 9000137P83 $179.00

717979026 72" Front safety chains Available on RC720

33 LB 9000137P83 $179.00

Rear Safety Chains 717980006 48" Rear safety chains

Available on RC480 42 LB 9000137P83 $179.00

717980016 60" Rear safety chains Available on RC600

44 LB 9000137P83 $179.00

717980026 72" Rear safety chains Available on RC720

48 LB 9000137P83 $179.00

-CP1T 01 015 000 12-OCT-11'*�

�

'*9


WORK EZ® DISK HARROWUS PRICE LIST

-CP1U 01

Standard Equipment

78 IN. DISK HARROW: REQUIREMENTS FOR OPERATION: Number of Disk Blades: 20 notched Tractor Horsepower (Min./Max.): 20 - 60 (front and rear) Hitch: Cat. I EZ Match™ compatible Disk Blade Size: 18 in. diameter Disk Blade Spacing: 5 1/2 in. F, 6 1/2 in., 7 1/2 in. R Maximum Cutting Depth: 6 in. Cutting Width: 70 in. Overall Length: 60 in. Overall Width: 79 in. Bearing Lubrication: sealed bearings Adjustable gang angle

-CP1U 01 014 000 01-SEP-11<6


WORK EZ® DISK HARROWUS PRICE LIST

-CP1U 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ DISK HARROW EZ78DC 78in Disk Harrow 678 LB 9001687P84 $2,192.00

-CP1U 01 014 000 01-SEP-11<<


WORK EZ® RAKESUS PRICE LIST

-CP1V 01

Standard Equipment

LANDSCAPE RAKE: REQUIREMENTS FOR OPERATION: Rake Width: Maximum Tractor Horsepower: 50 60LR - 60 in. Hitch: Cat. I EZ Match™ compatible 72LR - 72 in. 84LR - 84 in. Tine Spacing: 1 in. Tine Size: 5/16 x 1 in. Tine Material: high carbon spring steel Angle: 5 forward / 3 reverse Rake Pivot: 360° Pivot King Pin: 1 1/4 in.

-CP1V 01 014 000 01-SEP-11<=


WORK EZ® RAKESUS PRICE LIST

-CP1V 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 60LR RAKE EZ60L 60in Landsc Rake 245 LB 9000643P72 $836.00 WORK EZ 72LR RAKE EZ72LR 72in Landsc Rake 269 LB 9000733P81 $953.00 WORK EZ 84LR RAKE EZ84LR 84in Rock Rake 326 LB 9001003P31 $1,303.00

-CP1V 01 014 000 01-SEP-11<k


WORK EZ® BOX BLADESUS PRICE LIST

-CP1W 01

Standard Equipment

BOX BLADES: BOX BLADES: (continued)

STANDARD DUTY (For Estate and INDUSTRIAL (For Contractors): Homeowners):

OPTIONAL hydraulic raise/lower shank Number of Scarifiers (Shanks): 4 to 5 bar (infinite adjustment) Overall Height: 35 1/2 in. Number of Scarifiers (Shanks): 8 Box Depth: 17 in. Overall Height: 36 in. Cutting Edge: 1/2 x 6 in., Reversible Box Depth: 19 in. Number of Cutting Edges: 2 Cutting Edge: 1/2 x 6 in., Reversible Shank Adjustment: manual Number of Cutting Edges: 2 Side Plate (Endplate) Thickness: Shank Adjustment: manual 3/16 in. Side Plate (Endplate) Thickness: Hinges Rear Flat with Cutting Edge: n/a 3/4 in.

Hinges Rear Flat with Cutting Edge: MEDIUM DUTY (For Landscapers): Standard

OPTIONAL hydraulic raise/lower shank REQUIREMENTS FOR OPERATION: bar (infinite adjustment) Number of Scarifiers (Shanks): 6 Tractor Horsepower (Max.): Overall Height: 36 in. 48BL - up to 28 2wd / 20 4wd Box Depth: 17 in. 60BL - up to 28 2wd / 20 4wd Cutting Edge: 1/2 x 6 in., Reversible 60BM - up to 50 2wd / 40 4wd Number of Cutting Edges: 2 72BM - up to 50 2wd / 40 4wd Shank Adjustment: manual 84BM - up to 50 2wd / 40 4wd Side Plate (Endplate) Thickness: 72BH - up to 75 2wd / 55 4wd 3/8 in. 84BH - up to 75 2wd / 55 4wd Hinges Rear Flat with Cutting Edge: n/a 96BI - up to 100 2wd / 80 4wd

HEAVY DUTY (For Contractors): 3 Pt. Hitch: 48BL - Cat. I EZ Match™ compatible

OPTIONAL hydraulic raise/lower shank 60BL - Cat. I EZ Match™ compatible bar (infinite adjustment) 60BM - Cat. I Number of Scarifiers (Shanks): 6 72BM - Cat. I Overall Height: 36 in. 84BM - Cat. I Box Depth: 19 in. 72BH - Cat. I Cutting Edge: 1/2 x 6 in., Reversible 84BH - Cat. I Number of Cutting Edges: 2 96BI - Cat. II Shank Adjustment: manual Side Plate (Endplate) Thickness: 1/2 in. Hinges Rear Flat with Cutting Edge: Standard

-CP1W 01 014 000 01-SEP-11<q


WORK EZ® BOX BLADESUS PRICE LIST

-CP1W 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 48BL BLADE 48in 3pt Box Std Duty 313 LB 9000662P20 $860.00 WORK EZ 60BL BLADE 60in 3pt Box Std Duty 387 LB 9000739P97 $961.00 WORK EZ 60BM BLADE 60in 3pt Box Med Duty 484 LB 9000900P13 $1,169.00 WORK EZ 60BM BLADE 60in 3pt Box Med Duty - Hydr 484 LB 9001364P44 $1,772.00 WORK EZ 72BM BLADE 72in 3pt Box Med Duty 543 LB 9000965P58 $1,254.00 WORK EZ 72BM BLADE 72in 3pt Box Med Duty - Hydr 701 LB 9001429P89 $1,857.00 WORK EZ 84BM BLADE 84in 3pt Box Med Duty 603 LB 9001101P87 $1,431.00 WORK EZ 84BM BLADE 84in 3pt Box Med Duty - Hydr 603 LB 9001566P95 $2,035.00 WORK EZ 72BH BLADE 72in 3pt Box Hvy Duty 704 LB 9001449P14 $1,882.00 WORK EZ 72BH BLADE 72in 3pt Box Hvy Duty - Hydr 704 LB 9002063P60 $2,680.00 WORK EZ 84BH BLADE 84in 3pt Box Hvy Duty 803 LB 9001645P49 $2,137.00 WORK EZ 84BH BLADE 84in 3pt Box Hvy Duty - Hydr 803 LB 9002260P72 $2,936.00 WORK EZ 96BI BLADE 96in 3pt Box Ind Duty 1,153 LB 9002018P94 $2,622.00 WORK EZ 96BI BLADE 96in 3pt Box Ind Duty - Hydr 1,153 LB 9002838P99 $3,687.00



SD_N6433 COATING XN6433X No Coating No Charge 717991 Galvanized 9000069P30 $90.00

-CP1W 01 014 000 01-SEP-11=5


WORK EZ® REAR BLADESUS PRICE LIST

-CP1X 01

Standard Equipment

REAR BLADES: REQUIREMENTS FOR OPERATION:

STANDARD UTILITY (For Estate and Tractor Horsepower (max.): Homeowners): 60SL - 30 Moldboard Width: 60 in. / 72 in. 72SL - 30 Cutting Edge: 1/2 in. x 6 in. 60SM - 40 Offset Adjustment: 12 in. 72SM - 40 Tilt Adjustment: n/a 84SM - 40 Angle Adjustment: 5 Forward / 3 72SH - 65 Reverse positions 84SH - 65

96SI - 100 MEDIUM DUTY (For Landscapers, Farm, 108SI - 100 or Ranch): 96SHI - 225 Moldboard Width: 60 in. / 72 in. / 84 in. 120SHI - 225 Cutting Edge: 1/2 in. x 6 in. 144SHI - 225 Offset Adjustment: 12 in. Tilt Adjustment: 45° / E side 3 Pt. Hitch: Angle Adjustment: 5 Forward / 3 60SL - Cat. I EZ Match™ compatible Reverse positions 72SL - Cat. I EZ Match™ compatible

60SM - Cat. I EZ Match™ compatible HEAVY DUTY (For Contractors): 72SM - Cat. I EZ Match™ compatible Moldboard Width: 84 in. / 96 in. 84SM - Cat. I EZ Match™ compatible Cutting Edge: 1/2 in. x 6 in. 72SH - Cat. I/II Offset Adjustment: 12 in. 84SH - Cat. I/II Tilt Adjustment: 30° 96SI - Cat. II Angle Adjustment: 5 Forward / 3 108SI - Cat. II Reverse positions 96SHI - Cat. II/III

120SHI - Cat. II/III INDUSTRIAL (For Contractors): 144SHI - Cat. II/III Moldboard Width: 96 in. / 108 in. Cutting Edge: 1/2 in. x 6 in. Offset Adjustment: 12 in. Tilt Adjustment: 15° Angle Adjustment: 30°

HEAVY INDUSTRIAL (For Contractors):

Moldboard Width: 96 in./120 in./144 in. Cutting Edge: 1/2 in. x 6 in. Offset Adjustment: 24 in. Tilt Adjustment: 15° Angle Adjustment: 30°

-CP1X 01 014 000 01-SEP-11=?


WORK EZ® REAR BLADESUS PRICE LIST

-CP1X 01

Models

COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 60SL BLADE 60in 3pt Rear Std Utly 163 LB 9000586P74 $762.00 WORK EZ 72SL BLADE 72in 3pt Rear Std Utly 177 LB 9000622P93 $809.00 WORK EZ 60SM BLADE 60in 3pt Rear Med Duty 256 LB 9000671P44 $872.00 WORK EZ 72SM BLADE 72in 3pt Rear Med Duty 278 LB 9000766P92 $996.00 WORK EZ 84SM BLADE 84in 3pt Rear Med Duty 297 LB 9000858P55 $1,115.00 WORK EZ 84SH BLADE 84in 3pt Rear Hvy Duty 584 LB 9000966P35 $1,255.00 WORK EZ 96SH BLADE 96in 3pt Rear Hvy Duty 679 LB 9001054P13 $1,369.00 WORK EZ 96SI BLADE 96in 3pt Rear Ind Duty 1,074 LB 9003073P84 $3,992.00 WORK EZ 108SI BLADE 108in 3pt Rear Ind Duty 1,113 LB 9003508P12 $4,556.00 WORK EZ 96SHI BLADE 96in 3pt Rear Hvy Industrial 2,120 9007345P80 $9,540.00 WORK EZ 120SHI BLADE 108in 3pt Rear Hvy Industrial 2,260 9007661P50 $9,950.00 WORK EZ 144SHI BLADE 144in 3pt Rear Hvy Industrial 2,400 9007974P12 $10,356.00

-CP1X 01 014 000 01-SEP-11=4

(Distribution Center)

WORK EZ® EZ MATCH™US PRICE LIST

-CP2A 01

Standard Equipment

The WORK EZ® EZ Match™ Quick Hitch The following Case-IH products are is designed to make changing from one quick hitch compatible: 3-point hitch attachment to another quick and EZ! The upper hook easily slips into EZ78DC - 78 in. Disk Harrow position and simply lock the lower hooks EZ60LR - 60 in. Landscape Rake with quick flip of two handles - many EZ72LR - 72 in. Landscape Rake times from the comfort and convenience EZ84LR - 84 in. Rock Rake of the tractor seat. EZ48BL - 48 in. Standard Duty Box Blade

EZ60BL - 60 in. Standard Duty Box Blade Designed for use on Category 1, 3-point EZ60SL - 60 in. Standard Utility hitch tractors and implements Rear Blade

EZ72SL - 72 in. Standard Utility Heavy-duty steel construction Rear Blade Lower arms lock automatically EZ60SM - 60 in. Medium Duty Fast, easy attachment and release Rear Blade Designed to ASAE S278.7 Quick Hitch EZ72SM - 72 in. Medium Duty standards Rear Blade

EZ84SM - 84 in. Medium Duty MODEL: WORK EZ® EZ Match™ Rear Blade Width (inches) - 28 center to center (Hooks are 1-1/2 " wide) Height (inches) - 24 Weight (pounds) - 80 Maximum Horsepower - 60

-CP2A 01 014 000 01-SEP-11=7

(Distribution Center)

WORK EZ® EZ MATCH™US PRICE LIST

-CP2A 01

Models

COMMERCIAL MODEL Weight Factory Data List Price WORK EZ EZ MATCH 400 LB 9000232P54 $302.00

-CP2A 01 014 000 01-SEP-11=8

WORK EZ® BALE CARRIERSUS PRICE LIST

-CP2B 01

Standard Equipment

WORK EZ® Bale Carriers and Spears MODEL: Work EZ® Bale Spear are designed to compliment compact Application - Standard duty and utility tractors equipped with 3-point Weight - 98 lbs hitch for handling round and square hay Weight rating - 2000 lbs bales. The WORK EZ® Bale Carriers Tractor Horsepower (max) - 60 and Spears are also Work EZ® - EZ Hitch - Cat. I Match™ compatible. Hot dipped galvanized frame

Replaceable high carbon steel spear MODEL: Work EZ® Bale Carrier Two welded bottom stabilizing spears Application - Standard duty Weight - 155 lbs Weight rating - 2000 lbs Tractor horsepower (max) - 60 Hitch - Cat. I Hot dipped galvanized frame NOTE: Fork tines go under bale

-CP2B 01 014 000 01-SEP-11=6

WORK EZ® BALE CARRIERSUS PRICE LIST

-CP2B 01

Models

COMMERCIAL MODEL Weight Factory Data List Price WORK EZ BALE CARRIER 88 LB 9000311P08 $404.00 WORK EZ BALE SPEAR 155 LB 9000343P42 $446.00

-CP2B 01 014 000 01-SEP-11=<

WORK EZ® HAY SPEARSUS PRICE LIST

-CP2B 02

Standard Equipment

WORK EZ® Hay Spears are designed to MODEL: Work EZ® Double Bale Quick compliment most tractors and skid Attach steers that are Universal Quick Hitch Application - Standard duty Compatible for handling round and Weight - 168 lbs square hay bales. Weight rating - 2000 lbs

Tractor Horsepower (max) - 80 MODEL: Work EZ® Single Bale Quick Hitch - Universal Q/A Attach Hot dipped galvanized frame Application - Standard duty Two replaceable high carbon steel Weight - 153 lbs spears Weight rating - 2000 lbs One welded top stabilizing spear Tractor Horsepower (max) - 80 Hitch - Universal Q/A Hot dipped galvanized frame Replaceable high carbon steel spear Two welded bottom stabilizing spears

-CP2B 02 014 000 01-SEP-11==

WORK EZ® HAY SPEARSUS PRICE LIST

-CP2B 02

Models

COMMERCIAL MODEL Weight Factory Data List Price WORKEZ SNGL BALE QA 168 LB 9000559P02 $726.00 WORKEZ DBL BALE QA 153 LB 9000642P95 $835.00

-CP2B 02 014 000 01-SEP-11=k

vendor name: titan machinery inc. contact person: · pdf file · 2014-01-28spec #...

Documents