veneered board guide - · pdf filetimbmet are leading veneered board ... steamed beech crown...
TRANSCRIPT
solutions in wood
Veneered Board Guide
2 | Timbmet Stock Range
Timbmet are leading veneered board suppliers with over 50 years trading history with Europes best veneered board manufacturers assuring us a reputation second to none for reliability.Working closely with our suppliers ensures our product range is constantly developing and expanding to meet current demand and expectations.
solutions in wood
Looklikes** is a collection of reconstituted veneers produced from real wood (usually Spruce or Poplar) made to look like another specie. This results in a consistent colour. Decors can be selected from 3 groups: FSC certified Oak, FSC certified exotic woods and a number of trend setting interior designs.
See page 15 for more information, or visit www.looklikesveneer.com
Jumbo Sized Boards* available in White Oak veneered MDF. 2800 x 2070 x 19mm, these boards can offer greater optimisation resulting in reduced cost and waste.
Engineered Veneered MDF* available in Ebony and Zebrano sanded boards; other engineered veneers are available to order.
Finsa Iberpan 400* Oak Veneered lightweight MDF approx 400kg/m3 available in 40mm and 50mm thicknesses.
Lacquered Boards* available in 2440x1220x19mm in Crown Cut Oak and Black Walnut.
EXCLUSIVE
QUADRI C30/M72/Y74/K84PMS (pantone) 476
QUADRI C5/M32/Y43/K10PMS (pantone) 728
Our standard stock boards are a commercial grade A/B and suitable for a broad range of projects including furniture manufacture, interior fit out, shop fitting and wall panelling.
Enhanced grades, with different slicing and jointing techniques, are available on a variety of core boards, MR and FR MDF, Birch or Poplar Plywood etc.
For these specials, the minimum order quantity is one board, and the typical lead time two to three weeks.
The Querkus** Collection is a contemporary range of carefully selected European Oak veneers designed to complement modern, streamlined interiors.
See page 15 for more information, or visit www.querkusdecospan.com
* Standard Stock ** Specials
www.timbmet.com
| 3Choosing the slicing and jointing techniquesThe appearance of the veneer sheet is determined by the way the wood is sliced and how the pieces are joined together. The ways that veneer can be cut and details of how the various strips of veneer can then be jointed to produce the final sheet are shown below. The drawings give you a good idea of the end result. This helps you decide what your panel will finally look like and the best choice for your application.
This is the standard method. The various veneer strips are joined together in mirror-image pairs. This means that
each strip is the reflection of the previous one. This technique lets you
see perfectly how the log was handled.
This technique is often chosen if the veneer needs to be
stained. Staining means that no colour differences can be seen between the different veneer
strips on a panel.
This has all the advantages of a slip matched sheet of veneer. In
addition, the boards do not all have to be the same way up. This makes it unbelievably easy for the customer to
work with a veneered panel.
This jointing technique is only used for burr wood. The
small pieces of burr wood veneer are glued together
symmetrically.
Mixmatched
Decospan has developed its own patented machine for the mixmatched or planked technique. The veneers are jointed together randomly to give the final sheet the appearance of solid wood without disadvantages such as warping as the humidity varies.
Decospan can process veneers of various thicknesses in this way (0.6mm, 1mm, 1.5mm and 2mm). The thicker veneers are used when additional structuring needs to be applied.
Mirror Matched
This technique is primarily used for tall panels with a continuous patterning. This type of jointing can also be used for long reception desks or sliding doors.
Jointing Techniques
Book Matched Slip Matched Reverse Slip MatchedBurr Wood Balance Matched
Ways of SlicingThe description of the faces of veneered boards e.g. crown or quarter cut refers to the front face only; the reverse on two-sided boards may be either.
Quarter Cut
Produced by cutting at right angles to the growth rings producing a
straight grained effect.
Crown Cut
Produced by cutting a log in half and then slicing parallel to its centre to produce the crown or
heart effect.
Rotary Cut
The log is rotated around its axis against a knife as if unrolling a
carpet. This produces a continuous sheet with sometimes very wild
characteristics.
Burrs
A natural defect on the outside of the tree and/or its root. Characteristically there are small knots grouped closely
together giving a highly decorative appearance. The veneer is mainly
rotary cut.
Whatever you choose: Real wood is always unique and gives your project that little bit extra.
4 |
Engineered Veneered Boards
Ebony Macassar
Zebrano Quarter Cut
Veneered Boards An excellent solid hardwood substitute for a wide range of applications.
White Ash Crown Cut
Maple Crown Cut
Steamed Beech Crown Cut
White Oak Crown Cut
White Beech Crown Cut
Pine Crown Cut
Cedar Of Lebanon Quarter Cut
Cherry Crown Cut
White Oak Quarter Cut
Sapele Crown Cut
Wenge Quarter Cut Teak Crown CutBlack Walnut Crown Cut
Veneered Boards - Stock Range
Available from stock* Also available: 3050 x 1220mm ex stock
Veneered MDF
2440 x 1220mm
Product Code 4mm 6mm 10mm 13mm 16mm 19mm 26mm 31 mm
White Ash Crown Cut A/B ASWM *
Steamed Beech Crown Cut A/B BESM *
White Beech Crown Cut A/B BEWM *
Cedar of Lebanon Quarter Cut A/B CELM
Cherry Crown Cut A/B CHM *
Maple Crown Cut A/B MAM *
White Oak Crown Cut A/B WOM * * * *
White Oak Quarter Cut A/B WOM *
Pine Crown Cut A/B PIM *
Sapele Crown Cut A/B SAM *
Black Walnut Crown Cut A/B BWM * * * *
Wenge Quarter Cut A/B WEM
Teak Crown Cut A/B TEM
ALL AVAILABLE EX STOCK
Engineered Veneer
Ebony Macassar A/A EBM19MAC
Zebrano Quarter Cut A/A ZEM19BL
www.timbmet.com
| 5
Veneered Plywood 1 side
2400 x 1220mm
Product Code 3.6mm 6mm 9mm 12mm
White Ash Crown Cut 1 side ASWP
White Oak Crown Cut 1 side WOP
Sapele Crown Cut 1 side SAP
Other species and thicknesses available to order. For internal use only.
Veneered Poplar Plywood
2500 x 1220mm
Product Code 10mm 19mm
Black Walnut Crown Cut A/B BWPPOT
White Oak Crown A/B WOPPOT
solutions in wood
Flexi VeneerOur long grain flexi veneer is on a paper backing ready for fixing to almost any substrate. This veneer is not supplied pre-glued.
2440 x 1220mm
Product Code 0.6mm
White Ash Crown Cut ASFLEXV01
Steamed Beech Crown Cut BESFLEXV01
White Beech Crown Cut BEWFLEXV01
Cherry Crown Cut CHFLEXV01
Maple Crown Cut MAFLEXV01
White Oak Crown Cut WOFLEXV01CC *
White Oak Quarter Cut WOFLEXV01 *
Sapele Crown Cut SAFLEXV01
Black Walnut Crown Cut BWFLEXV01 *
Available from stock* Also available: 3050 x 1220mm ex stock
Edging Real wood veneered edging is available in a variety of veneers to complement our range of veneered boards. All edging rolls come pre-glued ready for fixing to the edges of the boards in widths of 22, 30 and 50mm.
Product Code 22mm 30mm 50mm
Ash ASET
Steamed Beech BESET
White Beech BEWET
Cedar of Lebanon CELET
Cherry CHET
Maple MAET
Pine PIET
Sapele SAET
White Oak WOET *
Walnut BWET
Wenge WEET
Zebrano ZEET
Veneered Blockboard
2440 x 1220mm
Product Code 18mm
White Ash Crown Cut A/B ASB18
White Beech Crown Cut A/B BEWB18
White Oak Crown Cut A/B WOB18
Other veneers available to order.
Veneered Birch Plywood
2500 x 1250mm
Product Code 10mm 13mm 16mm 19mm
Black Walnut Crown Cut A/B BWPBIT
White Oak Crown Cut A/B WOPBIT
6 |
FraxinusAsh Burl
Origin EuropeSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
Sequoi sempervirenVavona Burl
Origin N. AmericaSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
Acer saccharumMaple Burl
Origin N. AmericaSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
Arbutus menziessiMadrona Burl
Origin N. AmericaSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
Populus NigraPoplar Burl
Origin EuropeSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
Ulmus rubraElm Burl
Origin N. AmericaSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
QuercusOak Burl
Origin EuropeSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
Betula pendulaBirch Burl
Origin EuropeSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
Juglans nigraWalnut Burl
Origin N. AmericaSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
Umbellularia californicaMyrthe Burl
Origin N. AmericaSlicing RJointing Techniques BMQuality ARVeneer thickness 0.6
Antiaris toxicariaAko
Origin AfricaSlicing QJointing Techniques B