vente aux enchères publiques - lutece · pdf filevente aux enchères publiques...

VENTE AUX ENCHÈRES PUBLIQUES

Auctionsale after bankruptcy in France

Mardi 15 Décembre 2015 à 14h00

HOTEL DES VENTES435 Boulevard Louis Neltner42000 SAINT-ETIENNE

Pour tout renseignement / For all request : +33 (0)6 78 49 00 74Anglais et Espagnol / English and Spanish : +33 (0)7 81 58 50 40

Tuesday, December 15th 2015at 14.00 p.m

AUCTION ROOM435 Boulevard Louis Neltner42000 SAINT-ETIENNE

Catalogue complet disponible sur notre site internet

Detailed catalogue on our website

www.interencheres.comwww.lutece-industrie.com

Assisté par : Tél. : +33 (0)1 39 56 07 63LUTÈCE INDUSTRIE Mobile : +33 (0)6 82 82 32 08Consultants internationaux en ventes industrielles Fax. : +33 (0)9 70 60 56 6860, rue de Castagnary - 75015 PARIS [email protected]

VENTE EN SIMULTANÉ SURWWW.INTERENCHERES-LIVE.COM

LIVE BIDDING ON THE INTERNET

FABRICATION DE PANNEAUX SOLAIRES MANUFACTURING OF SOLAR PANELSASSEMBLAGE DE COMPOSANTS ELECTRONIQUES ELECTRONICS SURFACE MOUNT ASSEMBLY

443 Rue René Cassin

ZI Molina la Chazotte

42350 La Talaudière

Maître Frédéric BROSSAT - Commissaire Priseur Judiciaire435 Boulevard Louis Neltner, 42000 SAINT-ETIENNE

Tél. : 04 77 21 75 38 - Fax : 04 77 21 65 12 - Email : [email protected]

1

NOTICE FOR BUYERS The public auction sale is ruled by the General conditions of sale which are at the end of the catalogue, and, besides, by the following ones.

VIEWING

Monday, December 14th 2015 from 9.00 am to 12.00a.m and from 14.00 to 18.00 Tuesday, December 15th 2015 from 8.00 am to 12.00 am

ELIFRANCE

443 Rue René Cassin – ZI Molina la Chazotte 42350 La Talaudière

AUCTION SALE

The auction sale will be held Tuesday, December 15th 2015 at 14h00

Auction Room 435 Boulevard Louis Neltner

42000 SAINT-ETIENNE

By the Ministry of Maître Maître Frédéric BROSSAT Commissaire-Priseur Judiciaire

435 Boulevard Louis Neltner 42000 SAINT-ETIENNE

Buyers are required to fill in the buyer’s card available in the auction room and at the viewing, by writing their complete references, and, auction being cash, to give a signed check at the order of Frédéric BROSSAT and a bank guarantee (model hereafter) if the check is not certified. For the buyers subjugated and identified in an EU state member, write their VAT ID. n° and produce the id. n° given by the administration of their own country. Auctions are made net of tax. The purchaser will pay, in addition to price of adjudication a buyer’s premium of 14,4 % with VAT as well as the VAT of 20 % on the total price.

CLEARANCE OF LOTS Referring article 4 of the general conditions of sale, no clearance will be able without complete and certified payment.

Clearance on working days by appointment with Maître Frédéric BROSSAT From Tuesday, December 16th 2015

Small lots must be removed no later than December 18th 2015 at 17h30 Late removal January 25th 2015 at 18h00

PAYMENT / BANK DETAILS

CIC – Mr Frédéric BROSSAT – Etude de Maître BROSSAT Frédéric Code Banque 10096 - Code guichet 18017 - N° de compte 00043527302 - Clé RIB 30

IBAN FR76 1009 6180 1700 0435 2730 230 – BIC: CMCIFRPP

The translation of the French catalogue is intended only for purpose of understanding: the genuine text in French language is the only one available for legal matter. The conditions of sale in French are detailed in the French catalogue.

2

GUARANTEE OF PAYMENT / BANKBÜRGSHAFT

We, the undersigned Bank / Wir, die unterzeichnete Bank

Address / Adresse

Phone: Fax:

Guarantee the amount of Euros / Garantieren bis zum Betrag von Euros

Being the amount of the bid / die Kaufgeschäfte

By Mister or Miss

Company / Firma

Head Office

Commercial Registration n°

Holder at this bank of account n° / Inhaber des bei uns geführten Kontos

During the auction sale / bei der Versteigerung ELIFRANCE

For payment, Mister/Miss from the company ….....................................................................…………… will establish a check that we guarantee with the above mentioned limits or the payment, with his first written demand on the same conditions, could be done to the account of the auction’s office / Zum Zweck der Zahlung wird unser Kunde entweder einen Scheck ausstellen, den wir bis zur Höhe des oben genannten Betrages garantieren, oder wir werden eine Überweisung auf das Konto des Amtsträgers vornehmen, sabald dieser uns die Rechnung vorlegt.

Maître Frédéric BROSSAT Commissaire-Priseur Judiciaire

435 Boulevard Louis Neltner 42000 SAINT-ETIENNE

Tel : +33(0)4 77 21 75 38 Fax : +33(0)4 77 21 65 12 [email protected]

Paiement

CIC – Mr Frédéric BROSSAT – Etude de Maître BROSSAT Frédéric Code Banque 10096 - Code guichet 18017 - N° de compte 00043527302 - Clé RIB 30

IBAN FR76 1009 6180 1700 0435 2730 230 – BIC: CMCIFRPP

Done in / Ausgestellt in ................................................, on / am ...................................……………….

Signature / Unterschrift Commercial stamp / Stempel

3

BUYING ORDER

AUCTION SALE : ELIFRANCE, December 15th 2015 at 14h00

NAME : ……………………………………………… FUNCTION ..................................................................

COMPANY :…………………………………………………………………………………………………………………....

ADDRESS : …………………………………………………………………………………………………………………...

ZIP CODE/ TOWN: ……………………………………………………………………………………………………………………

PHONE NUMBER: ………………………………………………. FAX: ……………………………………………………………

BANK : ................................................................................. ACCOUNT NUMBER ....................................

VAT NUMBER : ................................................................................. ......................................................................

Requests Me Frédéric BROSSAT to buy the lots mentioned below for us for the price with VAT (20%) and without fees (14,4 % TTC) maximum written during the auction sale :

ELIFRANCE, December 15th 2015 at 14h00

Undersigned is conversant with the conditions of auction contract. Please find herewith the GUARANTEE OF PAYMENT.

Lot Number

Lot description AMOUNT in Euros excl.

BUYER’S PREMIUM ADJUGED PRICE in Euros

DATE : SIGNATURE :

4

Batch no

Est. Description Brand Type Serial no Year Location

1 200 2 low cabinets, metal, 2 doors and 8 sliding shelves PAROLAI LISTA

Testing zone

2 100 Set of 2 cabinets, 8 units, roll-up doors

Testing zone

3 30 NILFISK Vacuum Cleaner, GD 1000 Series

NILFISK Maintenance

4 80 Facom tool trolley FACOM Maintenance

5 100 Work bench, 4 drawers, with vices Maintenance

6 80 MAPE Grinder MAPE Maintenance

7 100 Shears, blade: 200mm Maintenance

8 300 SYDERIC Pillar Drill, SNC23, n°6663, year 1984

SYDERIC SNC23 6663 1984 Maintenance

9 50 SIMCO ionizers (2 pieces) AEROSTATPC

SIMCO AEROSTATPC Maintenance

10 100 SAM Torque key (2 pieces), 0.6EL and 0-3

SAM Maintenance

11 80 SUPER50 Precision Saw SUPER50 Maintenance

12 50 Cordless drills (1 DEXTER and BOSCH)

Maintenance

13 50 Thermal heaters (3 pieces) Maintenance

14 130 Hilti fastening apparatus, model DX450

HILTI DX450 Maintenance

15 200 Chauvin Arnoux megohmeter, C.A6545

CHAUVIN ARNOUX

C.A6545 Maintenance


CHAUVIN ARNOUX

C.A6545 Maintenance

17 100 AZ Heat Cutter, GG2 AZ GG2 Maintenance


CHAUVIN ARNOUX

C.A6543 Maintenance

19 150 SEFELEC Dielectric Strength Tester, PR5M, No. 305

SEFELEC PR5M 305 Maintenance

20 100 EUROSTAT Ohmmeter, TOM600 EUROSTAT TOM600 Maintenance

21 250 STRAPEX Strapping Machine, ALLPACK, No. 99051221

STRAPEX ALLPACK 9905122

1 Maintenance

22 200 2 anti-static testers Workshop entrance

23 250 STRAPEX Electric Strapping Machine, No. 50184878, year 2005

STRAPEX 5018487

8 2005 Stock

24 100 Strapping Machine, manual, no manuf. no model, with dispenser

Stock

25 150 ORGAPACK Electric Strapping Machine, OR-T250 with dispenser and 2 strapping coils

ORGAPACK OR-T250 Stock

26 180 Set of 6 ramps SIMCO ionization SIMCO Testing zone

27 200 2 low cabinets, metal, 2 doors and 8 sliding shelves PAROLAI LISTA

Testing zone

28 50 4 tool trolleys Testing zone

29 600 6 workstations Testing zone

5

30 600 6 workstations Testing zone

31 500 5 trolleys 2 trays Testing zone

32 400 4 trolleys 2 trays Testing zone

33 400 4 work tables Testing zone

34 400 4 work tables Testing zone

35 600 6 workstations and 1 tall cabinet Testing zone

37 200 2 workstations and 5 tables (various)

Testing zone

38 150 TESTUT scales, range [1 kg to 30 kg]

Maintenance

41 50 Stepladders: 1 with 7 steps, 1 with 8 steps

Stock

42 300 MIL'S Vacuum pumps, B 300, No. A595, power 5.5 Kw

Testing zone

43 350 Set of 10 socket boxes Workshop

44 300 Set of 10 (approx) rolls of 10 baskets (SOMETO Technifil)

Testing zone

45 400 Room contents, including 7 cabinets and their contents

Maintenance

46 1 500 Contents of floors 1 and 2 of the maintenance workshop

Maintenance

47 100 PRECISA scales, XB 4200C-GB, max. 4200 Kg, mini. 0.5 g

Maintenance

48 100 PRECISA scales, 1000C-3000D, max. 3000 Kg, mini. 5 g

Maintenance

Lots 50 to 63 can be grouped AUTOMATED PRODUCTION

LINE CRYSTALLINE PHOTOVOLTAIC

MODULES Production capacity of 20 MW

4 modules every 7 minutes Panels with 60 and 72 cells

Outputs ranging from 219 to 288 WC

50 250 000

Laying machine Stringer TEAM TECHNIK model Stringer TT1200, No. A00100561, 2011

TEAM TECHNIK

STRINGER TT1200

A00100561

2011 Photovoltaic

line

51 10 000

ABB Robot 6 axes IRB6640 M 2004, No. 66-68839, year 2010 with MARCI lift table , cap 1000kg, enclosure and loading/unloading conveyor

ABB IRB6640M2004 66-68839 2010 Photovoltaic

line

52 2 500 Visual control station with supply conveyor, and with entrance and exit elevator

Photovoltaic

line

53 2 000 Panel turning module with input conveyor

Photovoltaic

line

54 120 000

BURKLE laminator, Easy Lam, E-LAPV HV1-2135-A, No. 0125420110, 2010 with 2 BUSCH vacuum pumps, Cobra NC 400B, and 2 SINGLE heaters, STO 180/1-60-0- D4 / BU, 60 Kw power 2010

BURKLE E-LAPV-

HV12135-A 1254201

10 2010

Photovoltaic line

6

55 15 000 Set of 3 belt conveyors with panels turner

Photovoltaic

line

56 60 000 BERGER Imagesetter, PSS8, No. 1257 power 000W

BERGER Photovoltaic

line

57 6 000 Dark IV Module Tester

Photovoltaic

line

58 2 000 BUS RIBBON Cutting Station, KOMAX, ADS115

BUS RIBBON

KOMAX ADS115 Photovoltaic

line

60 20 000

TRIULZI washing machine, SX1610.6.3.4 No. DODC40088, 2010 with IDROTECHNICA osmosis unit, IDRO RO 500, No. 11884/10 flow 500 L / h

TRIULZI SX1610.6.3.4 DODC40

088 2010

Photovoltaic line

61 600 HYMO Lift Table, cap 3000kg, width. 1.20m, 2m long

HYMO Photovoltaic

line

62 300 MARCO Lift table, capacity 1000kg, width 800mm, 1200mm long

Photovoltaic

line

63 15 000 PASQUATO SNC knife cutting machine, TTP EVA, No. 629, year 2010, width 2m

PASQUATO SNC

TTP EVA 629 2010 Photovoltaic

line

65 1 200

Test pillar with LLOYD INSTRUMENTS extensometer, LF PLUS, No. 01 / LFLS / ILXA / EU, year 2006 with AXIOHM mini printer (A711)

LLYOD INTRUMEN

TS LF PLUS

01/LFLS/ILXA/EU

2006 Photovoltaic

line

66 3 500

Automatic control by DELTEC VISION image analysis, DV.TEC.3000 AA No. 10093 with associated IT

DELTEC VISION

DV.TEC.3000 AA

10093 Parts

storeroom

67 2 000 VISION ENGEENERING Microscope (VS8)

VISION ENGEENER

ING VS8

Parts storeroom

68 20 000

PASAN Cell tester, CTS LAB 606 with PELLETIER work table, flash counter, PASAN BV67-5 module, two BV 67-14 modules, one BV 67-25 module, one BV 67 module, one BV 67-29 module, one HP CPU, 2 LCD ACER screens (17 inches)

PASAN CTS LAB 606 Parts

storeroom

69 200 CETIM, year 1991, 100 X 100cm steel foot

Parts

storeroom

80 5 000 Approx. 12 boxes of 500 SOLLAND cells, S 20 156PS200-10CO

Stock

81 500 14 reels of string (2.40 x 0.15mm), 5 reels of string 1.70 x 0.15mm

Stock

82 3 000

Batch of 6 pallets, aluminum profile, 1000 pieces, length 1655 mm; 5 pallets, aluminum profile, 1000 pieces; 15 cartons of FILM BACK MLP μ 185, height 1020 mm; 60 cartons with junction boxes, approx 40 cartons of TESA, double-sided, width 19mm

Stock

83 5 000

Batch of 18 pallets of glass (DUCATT - ref. COLD2), thickness 3.2 mm, length 1647 mm, width 991 mm, polishing C 1.5

Stock

85 8 400

Batch of solar panels, maximum power 250 Wp, open circuit voltage 37.78 V; Short Circuit current 8.80 A

Photovoltaic

line

7

CMS Line No. 1 - Lots 100 to 106

can be grouped

100 500 ASYS Loader, model AES 03D, No. 502, 2000

ASYS AES 03D 2000

Container, materials

handling and storage zone

101 300 ASYS copper destacker - model LSB 03, No. 228

ASYS LSB 03 228



102 3 000 COOKSON Silkscreen Unit, model UP3000 / A, No. U0899, MYDATA SPEEDLINE UltraPrint VPM 3000

COOKSON

SPEEDLINE VPM

ULTRAPRINT 3000



103 10 000

MYDATA Component Assembly Unit, model MY19L1, No. 19119, 19 slots, year 2000 with two MYDATA motorized conveyors and stacker and MYDATA stacker, TEX, automatic

MYDATA MY19L1 2000



104 3 000

DYAMANT Inspection Center, model VI 3000, No. 8108, 2000 with conveyor and computer station

DYAMANT VI 3000 2000



105 5 000

HELLER reflow oven EXI 1912, No. 0406F2-A7B3-81025-03, year 2006, capacity 500 x 130 + IBM Screen

HELLER 1912 EXI 2006



106 500 ASYS Output Stacker, model AMS 030, No. 503, 2000

ASYS AMS 030 503 2000




can be grouped

110 500 DYAMANT INDUSTRY Destacker DYAMANT INDUSTRIE



111 3 000 Silkscreen Center SPEEDLINE MPM UltraPrint 3000 model UP3000 / A, No. U0901

SPEEDLINE MPM

UP3000/A U0901



112 4 000

MYDATA mounting unit of components, such MY9, No. 5081, 2000, 9 slots with 2 conveyors and stacker 1

MYDATA MY9 5081 2000



113 6 000

MYDATA Component Assembly Unit, model MY12, No. 13101, year 2000, 12 slots with 2 conveyors and 1 stacker

MYDATA MY12 13101 2000



114 5 000 HELLER reflow oven 1809 EXL, No. 0405F2-A783-8329-03, 2005

HELLER 1809EXL 0405F2-A783-

8329-03 2005



115 500 ASYS output module model AMS04

ASYS AMS04




can be grouped

120 3 000 Screen printing center SPEEDLINE MPM UltraPrint 3000, No. U0900

SPEEDLINE MPM

ULTRAPRINT 3000

U0900



8

121 3 000 Screen printing center SPEEDLINE MPM model AP / B, No. 10090

SPEEDLINE MPM

AP/B 10090



123 6 000

MYDATA Component Placement Machine, model MY15, No. 15101, year 2001, 15 slots with 2 motorized conveyors

MYDATA MY15 15101 2000



124 3 000 DYAMANT VI 3000 optical inspection center

DYAMANT VI 3000



125 6 000

MYDATA Component Placement Machine, model MY15, No. 15093, year 2000, with 2 motorized conveyors

MYDATA MY15 15093 2000



126 3 000 BTU Reflow Oven, model Paragon 150

BTU PARAGON 150



127 500 Output Module Stacker ASYS AMS 03D, No. 019796, year 2005

ASYS AMS03D 19796 2005



128 10 000 Inspection Center CYBEROPTIC model SE 300 3D detection

CYBEROPTIC

SE300




can be grouped

130 500 FUJI Destocker, model MNCE 4050B, No. FNE0008, year 1997

FUJI MNCE FNE0008 1997



131 3 000 Screen printing center SPEEDLINE MPM UltraPrint 3000 model UP3000 / A, No. U0926



132 10 000 MYDATA MY19 Component Placement Machine, No. 19115, year 2000, 19 slots with stacker

MYDATA MY19 19115 2000



133 3 000 BTU Reflow Tunnel, model Paragon 150, No. SCF-37 with conveyor

BTU PARAGON 150 SCF-37



134 5 000 MYDATA TP18 assembly unit, year 1992

MYDATA TP18 1992



135 2 000 Lot of 10 Agilis feeders, model LM8









9

138 2 000 Set of feeder supports



139 4 000 Set of 73 media feeders



140 3 000

End-of-Line Inspection Center No. 8135, year 2000 with input and output conveyor and inspection bench

8135 2000 Soldering

zone

141 3 000

VI TECHNOLOGY optical inspection unit, model VI 3000, No. 04030188, 2004 with input and output motorized conveyor and output table

VI TECHNOLO

GY VI 3000 4030188 2004

Soldering zone

142 10 000 X-ray control unit, PHEONIX X RAY model INSPECTOR PCBA 130, No. IN501C8000-52103, 2003

PHEONIX X RAY

PCBA INSPECTOR

130

IN501C8000-

52103 2003

Soldering zone

143 25 000 TAKAYA mobile sensor test unit, model ITOCHU APT9400CE No. VOF08031, 2000

TAKAYA ITOCHU

APT9400CE VOF080

31 2000

Soldering zone

144 25 000

TAKAYA mobile sensor test unit, TOCHU APT9401CE, n° V2F22080, year 2002 with printer STAR DP8340

TAKAYA ITOCHU

APT9401CE V2F2208

0 2002

Soldering zone

145 20 000

Solder Machine ERSA, model SELECTIVE WAVE, model VERSAFLOW 50/60, No. 04J0160-S005B, year 2004, with extraction and filtering unit (PUREX)

ERSA VERSAFLOW

50/60 S005B-04J0160

Soldering

zone

146 10 000 Solder Machine SOLTEC WAVE, model 6622CC, No. 0005611801, year 2000, with input conveyor

SOLTEC 6622C 5611801 2000 Soldering

zone

147 10 000

Solder machine (VITRONICS SOLTEC), model 6622CC, No. 0112676701, year 2001 with filtering extractor (PUREX), year 2007, input conveyor

VITRONICS SOLTEC

6622C 1126760

1 2001

Soldering zone

148 10 000

Varnishing line with: - Motorized input module - Robot (ASYMTEK), model C740 - Conveyor with inspection cage (UV) - Conveyor oven (THERMATECH) length 2,5m - Exit belt with ventilated inspection cage (UV) - Product cabinet (4 doors) - 2 ovens - 2 extractors

Soldering

zone

149 500 Stencil cleaner (MBTECH), model N29SA2

Technical

room

150 200 Soldering machine (ZEVAC), model MINI WAVE, model SSM 9 with digital display, foot control and table

ZEVAC MINI VAGUES SSM9 Soldering

zone

10

151 250

Unit has: - Duburring and Tinning with two containers (WAVE SERVICES), model PAD500 ROHS, year 2007 - Solder machine (ZEVAC), model MINI WAVE, model SSM4 with steel bench and extraction hood

ZEVAC VAGUES

SERVICES PAD500ROHS

2007 Soldering

zone

155 300 Component sealer (DIMA), model Handytaper

DIMA HANDYTAPER Soldering

zone

156 700

Mini CNC milling center Colinbus model LAB FLEX-30 / HF, 2008. Table 70 x 50cm approx. 278x / 360 Y / Z 70mm 60 000 rpm. Plexiglas cage aluminum chassis, rolling metal tube structure.

COLINBUS LABO FLEX-

30/HF 2008

Soldering zone

157 350

Finishing station with: - Modular stereomicroscope (LEICA MZ6), fixed foot, Zoom FINETECH RV1+WATEC 202D IRIS focus+ camera WATEC 23152, heater, 2 heat modules FINETECH RB11 1600W - Module FINETECH solver removal - Module FINETECH reflow removal - Module FINETECH placer control- Module FINETECH hot air bottom heating - Small scanner of thermal profile (ECD MOLE) - ELECO air flow rate controller

Soldering

zone

158 200

Configuration: rotary table (XY), color camera, opticals (right and oblique), HP Vectra central unit, standard screen CTX 19-inch and selection of accessories (soldering irons, foot pedal)

ERSA ERSASCOPE Soldering

zone

159 400

Configuration: - 2 shears (LOUPO) 2mm et 3mm - 5 heat scissors (CAB), Hektor 2 (3 pieces) and Hektor 3 (1 piece) - STRECKFUSS lead shear (model 057) - With table and accessories

Soldering

zone

160 1 500

Connector placement machine (AMP), model ACTION-PIN, n° 677-427-1, pneumatic, year 1996, mobile fame table with bench, steel foot, composite top

AMP ACTION -PIN 677-427-

1

Soldering zone

161 400 Board testing Interface (NMTC) Soldering

zone

162 200 Forming and Cutting bench (OLAMEF), model MOT/98/A, n°121955

OLAMEF MOT/98/A 121955 Soldering

zone

163 200 Performing machine (STRECKFUB), model C066/M, n°85.12 238

STRECKFUB

C066/M 85.12 238

Soldering

zone

164 200 Cutting bench (EBSO), model EBSOMAT 40-2

EBSO EBSOMAT 40-

2

Soldering zone

165 200 Cutting bench (BURST & ZICK), model C042, n°00.12.804E, year 2000

BURST & ZICK

C042 00.12.80

4E 2000

Soldering zone

11

166 100 Manual shaping and cutting bench (OLAMEF), model TP6/1, n° 182010, year 2007

OLAMEF TP6/1 182010 2007 Soldering

zone

167 100 Manual shaping and Cutting bench (OLAMEF), model TP6/1, n° 191010, year 2008

OLAMEF TP6/1 191010 2008 Soldering

zone

168 100 Cutting bench (CUTBEND), model VB

CUTBEND VB Soldering

zone

169 300 2 Die-Cutting machines (EMG PRESSES) with jig and table

EMG PRESSES

Soldering

zone

170 400 Batch of 6 Die-Cutting machine (COMATEL) with table

COMATEL Soldering

zone

171 300 2 PCB separators (MAESTRO), model 2M with table and riveter

MAESTRO 2M Soldering

zone

172 4 000 Dispensing robot (I&J FISNAR), model I&J7400C-R, n°234.005, year 2007

I&J FISNAR I&J7400C-R 234.005 2007 Soldering

zone

173 150 Counter CMS-4 ABA ELECTRONQUE

ABA ELECTRON

IQUE Testing zone


ABA ELECTRON

IQUE Testing zone


ABA ELECTRON

IQUE Testing zone


ABA ELECTRON

IQUE Testing zone

177 150 Horizontal counter (OLAMEF), model 8301101, n°111902, year 2000

OLAMEF 8301101 111902 2000 Testing zone

178 100 2 Counters (OLAMEF) Testing zone

179 100 2 Counters (OLAMEF) Testing zone

180 8 000 Tester AGILENT, model 3070 series 3

AGILENT 3070 Série 3 Testing zone

181 4 000 Tester HP, model HP 3070, series 3

HP 3070 Série 3 Testing zone

182 3 000 Tester GENRAD, N°22871-339, year 2008

GENRAD 22871-

339 2008 Testing zone

183 1 500 Tester GENRAD, N°22871-339, year 2004

GENRAD 22871-

339 2004 Testing zone

184 10 000 Tester TERADYNE, model SPECTRUM 8800 series, n°8855-058

TERADYNESPECTRUM 8800 Séries

8855-058 Testing zone

185 400 Vacuum pump (MIL'S), model ROTOMIL'S with vertical tank

MIL'S ROTOMIL'S Testing zone

186 300 Inspection Center (CYBEROPTIC), model LSM2

CYBEROPTIC

LSM2 Testing zone

187 3 000 30 GENRAD boards (approx.) and miscellaneous parts

Testing zone

188 1 200 12 boards (approx.) for test bench (HP3070)

Testing zone

189 300 6 Test Heads (GENRAD) Testing zone

190 250 5 Test Heads (HP3070) Testing zone

191 150 Set of spares for ICT Test Head: hands, sleeves - All sizes, forms and strengths

Testing zone

12

192 300 Set of sensors (JTAG) Temento, Microchip, Altera

Testing zone

195 4 000

Climate chamber (CLIMATS), model EX7728-HE, No. 7236, year 2006 - width. 850mm, height 900mm, depth 900mm

oven room

196 4 000

Climate chamber (CLIMATS), model EX7728-HE, No. 7136, year 2006 - width 850mm, height 900mm, depth 900mm

oven room

197 3 000 Climate chamber (CLIMATS), model 760M30/3 - width. 850mm, height 850mm, depth 900mm

oven room

198 800

Climate chamber (SHEL LAB), model 1465-2CE, No. C800501 - width. 450mm, height 450mm, depth 550mm

oven room

199 500

Steaming CLIMATS model XU686, No. 7503, 2007. Max 200 ° C, power 6 2kW - width 660mm, height 1400mm, depth 700mm

oven room

200 600

Oven Memmert, model ILE800 No. G800.0074, 4800W power, temperature 220 °C, Width 1000m, height 1200mm, depth 530mm

MEMMERT ILE800 G800.00

74 Testing zone

201 200

Dry cabinet (DR.STORAGE), model X2E-240, No. AA08112223. Width 550mm, height 530mm high, depth 520mm

DR.STORAGE

X2E-240 AA08112

223



202 200

Dry cabinet (DR.STORAGE), model X2E-240, No. AA07102297. Width 500mm, height 500mm, depth 400mm

DR.STORAGE

X2E-240 AA07102

297



203 200

Dry cabinet DR.STORAGE, X2E-240 model No. BA07122269. Width 500mm, height 500mm, depth 400mm

DR.STORAGE

X2E-240 BA07122

269



204 200

Dry cabinet DR.STORAGE, X2E-240 model No. BA07122268. Width 500mm, height 500mm, depth 400mm

DR.STORAGE

X2E-240 BA07122

268



205 500

Oven (MEMMERT), model ILE800 No. G800.0073, 4800W power, temperature 220 °C, Width 1000m, height 1200mm, depth 530mm

MEMMERT ILE800 G800.00

73 Testing zone

206 500 Oven CLIMATS, Width. 670mm, height 1400mm, depth 700mm

CLIMATS Testing zone

207 200 Oven, no manuf., no model. Width 700mm, height 1200mm, depth 400mm

Testing zone

208 300 Oven (CLIMATS). Width 700mm, height 1440mm, depth 600mm

CLIMATS Testing zone

209 200 Oven (HERAEUS INSTRUMENTS), model T6030, No. 51000023, max temperature 250°C. Width 350mm, height 200mm, depth 350 mm

HERAEUS INSTRUME

NTS T6030

51000023

Testing zone

210 1 500 Oven (MPC), model SE79, No. 26001, year 1996. Width 780mm, height 1400mm, depth 600mm

MPC SE79 26001 1996 Testing zone

13

211 300

Oven (MEMMERT), model ULP500 No. 9597.0164, max temperature 300 ° C, power 2000W width. 550mm, height 470mm high, depth 360mm

MEMMERT ULP500 9597.016

4 Testing zone

212 300 Dry cabinet (DR.STORAGE), model X2E-315, No. BA07102212. Width. 850mm, height 800mm, depth 380mm

DR.STORAGE

X2E-600 BA07102

212 Testing zone

213 500 Dry cabinet (DR.STORAGE), 3 levels, model X2E-600, No. CA08052265. Width 550mm, height 450mm, depth 500 mm

DR.STORAGE

X2E-600 CA08052

265



214 500 Dry Cabinet (DR.STORAGE), model X2E-600, No. CA08052266. Width 550mm, height 450mm, depth 500 mm

DR.STORAGE

X2E-600 CA08052

266



215 800 Vacuum bagging FRANCO PACK model AUDIONVAC VM 201, 1999 50x50cm size

FRANCO PACK

AUDIONVAC VM 201

1999



216 1 200 Bagger FRANCO PACK model VM201G, No. 2010040267, 2000

FRANCO PACK

VM201G 2010040

267 2000



217 300 Bagger (BOSS), model NT1 / 46N, No. 051147

BOSS NT1/46N 51147 Kardex zone

218 200 Dry cabinet (SUPER DRY). Width. 800mm, height 800mm, depth 650mm

SUPER DRY

Kardex zone

219 600 Dry cabinet

Testing zone

225 3 500 Washer MBTECH card model NC25

Testing zone

226 2 000 Washer KERRY cards, model SC 1000, No. 60151-2-16-301

Testing zone

227 1 000 Washing machine LANCER model 1300 PCB with demineralization station LANCER

Testing zone

228 1 200 Machine to dry LANCER model 13 PCB Lab SEC

Testing zone

229 1 500 AQUEOUS machine, SMT model 1000-1D, No. 7538, 2006

Testing zone

235 400 Precision diamond saw LDWS ESCIL model W 6234

Testing zone

236 300 Workstation ZEVAC model DRS24

Testing zone

237 300 Bay with oscilloscope, model 475, voltmeter HP, model 3456A, and various

Testing zone

238 100 Tektronix Oscilloscope model TDS784C

Testing zone

239 400 Electron microscope cross table with VISION

Testing zone

14

240 600

Electron microscope MICROELECTRONICS model MX 5030RZ; Lens Hirox AD-5030RLM-S Mount; Light source Hirox KH 1000 HI SCOPE cross table with microscope stand; Hirox MX 2525C with wheel; CPU DELL OPTIPLEX GX1, IYAMA monitor; LS902UT vision Masters 1451 19 inches, Monitor JVC TM-90 PSN 45W

MICROELECTRONIQU

E MX 5030RZ Testing zone

241 500 UNION electronic microscope with color camera CP410 PANASONIC WV 75 ohms with 4.7kW microscope stand

UNION Testing zone

242 300 KINETIC SYSTEM vibrating table, model VIBRAPLANE

KINETIC SYSTEM

VIBRAPLANE Testing zone

243 200 3 Multimeters HP, model 3478A HP 3478A Testing zone

244 300 LCR Meter HP, 20MHz-1mhz guy with HP 16034E test fixture Module

HP Testing zone

245 150 3 HP Multimeters HP Testing zone

246 1 500 HP spectrometer, model 3588A HP Testing zone

247 100 Tektronix Oscilloscope model 11801C

TEKTRONIX

Testing zone

248 100 HP frequency meter, model 5316B HP Testing zone

249 1 500 Microscope RANK XEROX, PANASONIC No. M264220 with camera CCD

RANK XEROX

M264220 Testing zone

250 400 FICOSA Tester model X400SVWX350X202

FICOSA X400SVWX350

X202 Testing zone

251 2 000 Wiring Tester model Synor 4200 Testing zone

252 100 2 MOLE Cases for temperature measurement and profile

MOLE Testing zone

253 200 SIMCO electrostatic funnel model EA2

SIMCO EA2 Testing zone

254 200 DOGA cutting measurer model 2641C

DOGA 2641C Testing zone

255 200 Set of 4 stabilized power supplies Testing zone

256 500 Laser power SPECTRON LASER SYSTEM Compatible shutter CW60

SPECTRON LASER

SYSTEM CW60 Testing zone

257 300 3 SIMCO electrostatic controllers, ELCOWA and ION SYSTEMS

Testing zone

258 3 000 Contaminomètre METRONELEC model CT1000

Testing zone

259 2 000

NATIONAL INSTRUMENTS test bench, model NI PXI-1042 with NIPXI-2503 card and various accessories

Testing zone

15

260 150

Batch with: - 2 sliding calipers, digital (STAINLESS), 0 to 500mm - sliding caliper, digital (0 to 300mm) - sliding caliper (0 to 650mm) - sliding caliper (0 to 300mm) - Height gauge (TUTOYO) from 0 to 300mm

Testing zone

261 150

Batch with: - 3 comparators (75 to 100mm; 25 to 50mm; 0 to 25) - 3 gauges - 2 comparators (miscellaneous)

Testing zone

262 150 Batch of 3 gauge boxes (JMC) and 1 box of precision wedges

Testing zone

270 300 Batch of 3 binoculars OPTIKA, model SZ6745

OPTIKA Testing zone

271 300 Batch of 3 binoculars OPTIKA, model SZ6745

OPTIKA Testing zone

272 300 Batch of 3 binoculars LEICA LEICA Testing zone

273 300 Batch of 3 binoculars Testing zone

274 300 Batch of 3 binoculars ZEISS, model STEMI 2000

ZEISS Testing zone

275 300 Batch of 3 binoculars LEICA, model MS5

LEICA Testing zone

276 300 Batch of 3 binoculars LEICA, model MS5

LEICA Testing zone

277 400 Batch of 4 binoculars ZEISS, model STEMI 2000

ZEISS Testing zone

280 150 Rework System (ERSA), model IR500A

ERSA Testing zone

281 150 Rework System (ERSA), model IR500A

ERSA Testing zone

282 100 Digital Preheating Plates (WELLER), model WHP 3000 (2 pieces)

WELLER Testing zone

283 100 Digital Preheating Plates (WELLER), model WHP 3000 (2 pieces)

WELLER Testing zone

284 100 Digital Preheating Plates (PDR), model IRP500 (2 pièces)

PDR Testing zone

285 100 Digital Preheating Plates (METCAL & PACE) (2 pieces)

Testing zone

286 500 Soldering Station (METCAL), model PW1 SP 20 with table (5 pieces)

METCAL Testing zone

287 500 Soldering Station (METCAL), model STSS PS2V 02 with table (5 pieces)

METCAL Testing zone

288 500 Soldering Stations (METCAL), model STSS PS2V 02 with table (5 pieces)

METCAL Testing zone

289 500 Soldering Stations (METCAL), model MX 500P 21 with table (5 pieces)

METCAL Testing zone

290 200 Soldering Stations (METCAL), model MXPS5200 with table (2 pieces)

METCAL Testing zone

291 400 Soldering Station (WELLER), model WMD-3 with table (4 pieces)

WELLER Testing zone

16

292 300 Soldering Stations (OKI), model PS900, 90W (3 pieces)

OKI Testing zone

293 200 Soldering Station (WELLER), model WHA-2000 820W

WELLER Testing zone

294 300 2 Soldering Stations (WELLER), model MT1500, 130W with plate

WELLER Testing zone

295 200 2 Soldering Stations (JBC), model Advanced JT7000, 900W

JBC Testing zone

296 150 Soldering station (OKI), model Smartheat MFR PS2K 75W No. 006605

OKI Testing zone

297 300 3 Soldering Stations (WELLER), PACE

Testing zone

298 250 Thermal strippers (TMC), PB150M No. 20M0984, 2006 with JBC station

Testing zone

299 500 5 Dosing Modules (EFD)

Testing zone

300 250 Dosing module (LOCTITE), model 97006

Testing zone

301 250 Ultrasonic Scalpel NSK, model 80, No. 017768

Testing zone

302 300 Ultrasonic Scalpel TMC model 203

Testing zone

304 100 2 screwdrivers ELIZA model ELI15

Testing zone

305 500 5 precision screwdrivers DELVO DELV73

Testing zone


Testing zone


Testing zone


Testing zone

309 300 About 20 drives without screwdrivers

Testing zone

310 250

Dolly with PACE module, model ST450 with Fume Extraction System (PACE), model ARLM EVAC 250

Testing zone

311 100 Fume Extraction System (BOFA), model SYSTEM400

Testing zone


Testing zone


Testing zone


Testing zone


Testing zone


Testing zone


Testing zone


Testing zone

319 100 Fume Extraction System (PACE) Testing zone


17









340 300 2 Printers BRADY labels 600X-PLUS-E model

Testing zone


Testing zone


Testing zone

343 500 4 Printer ZEBRA labels, such Z4M Testing zone

344 450 3 Label Printers: ZEBRA Z4000; ZEBRA z6000; PUBADRESSE

Testing zone

345 300 2 label printers (ZEBRA), model 110XiIII +

Testing zone

346 300 2 Label Printers: BRADY BP-PR600 + A4 + / 300

Testing zone

400 2 000

Vertical storage carousel (KARDEX), model INDUSTIEVER 105, No. IND 105 2510 6. Max. total load 2 tons. Load per tray 300 K, Width 250cm

KARDEX INDUSTIEVER

105 IND 105 2510 6

Kardex zone

401 3 000

Vertical storage carousel (ELECTROCLASS), model G60 16P / 17 "50 / H4540, 2001, No. 01M1624 series, Max load per tray. 250Kg, width approx 300cm with set of component trays

ELECTROCLASS

G60 16P/17" 50/H4540

01M1624 2001 Kardex zone

402 1 000

Vertical storage carousel (HANEL), model ROTOMAT 970, No. 61872 / 2-2, year 1993. Width 300cm approx. Max load per tray: 191Kg, Total load (max) 475Kgs

HANEL ROTOMAT 97061872/2-

2 1993 Kardex zone

403 4 000

Vertical storage carousel (ELECTROLUX), model IPN 4000, No. 1270, year 1994. Width 250cm approx. Robot useful load: 3150Kg, payload per slot: 150Kg

ELECTROLUX

IPN 4000 1270 1994 Kardex zone

404 4 000

Vertical storage carousel (BELLHEIMER), model IND 1610.5-2 251, No. 149/31600. Average load per tray: 212Kg. Total max load 3392KG. Width 250cm approx.

BELLHEIMER

IND 251 1610,5-2

149/31600

Kardex zone

405 3 000

Vertical storage carousel (BELLHEIMER), model IND 1610.5-2 251, No. 123/26138. Average load per tray: 212Kg. Total max load 3392KG. Width 250cm approx.

BELLHEIMER

IND 251 1610,5-2

123/26138

Kardex zone

18

406 5 000

Vertical storage carousel (BELLHEIMER), model IND 2713.5 to 12 251, No. 128/27 402. Average load per tray: 239Kg. Total max load 6453KG. Width 250cm approx.

BELLHEIMER

IND 251 2713,5-12

128/27 402

Kardex zone

407 3 000

Vertical storage carousel (BELLHEIMER), model SIS 181 2113.75 46, No. 90 097348/001. Load capacity per tray: 130/162 Kg max Total load 2794KG. Width 250cm approx.

BELLHEIMER

SIS 181 2113.75 46

90 097348/0

01 Kardex zone

408 3 000 Vertical storage carousel Kardex zone

409 2 000 Vertical storage carousel (BELLHEIMER), model I 105-2510-5-ND No. 021/23808

Kardex zone

410 2 000 Vertical storage carousel (BELLHEIMER), model I 105-2510-5-ND No. 021/23687

Kardex zone

411 300

1 vertical storage carousel, 4 levels, width 3600 mm, depth 1900 mm, height 2200 mm. And 3 dynamic storage carousels, with 2 levels and 4 shelves, width 1200 mm, depth 1200 mm, height 1900 mm

Kardex zone

415 7 000 Mast boom (HAULOTTE), model STAR 10, No. ME108193, 2010. Max load 200Kg, lift height 8m

HAULOTTE STAR10 ME1081

93 2010 Stock

416 3 200

Electric Forklift (CLARK), front loading, model EM20, year 1994. Cap 2 tons, lifting height 3300mm, 3-stage mast, four full wheels, 3714Kms

CLARK EM20 1994 Stock

417 3 800

Electric Forklift (CATERPILLAR), side loading, model FB20KT, cap. 2 tons, lifting height 3300mm, 3-stage mast and translator, three full wheels, year 2005

CATERPILLAR

Stock

418 4 000

Electric Forklift (CATERPILLAR), side loading, 2-stage mast, 1623 hours, model RB20K No. R20K10058, cap. 2 tons, lift height 5400mm

CATERPILLAR

Stock

419 500 Electric pallet stacker (CROWN), WF 3000 series, duplex mast, cap. 1 Tonne

WF Stock

420 300 Pallet movers (Bishamon), model ESL V40CE

BISHAMON ESL V40CE Stock







424 250 Pallet lifter (GS), cap. 1T, lift height 50cm, No. 760027

GS 760027 Stock

425 250 Pallet truck scales, cap 2T Stock

426 100 Pallet truck, fork length 1.5 m Stock

427 100 Pallet truck, fork length 800mm, cap. 2.5T

Stock

19

428 100 Pallet truck, fork length 800mm, cap. 2T

Stock

429 100 Pallet truck, cap. 2T Stock

430 100 Pallet truck, cap. 2T Stock

431 100 Pallet truck, cap. 2.2T Stock

435 120 Manual Stackers (HYMO), model SC2-12, cap. 200Kg

HYMO SC-12 Stock

436 120 Manual Stackers (HYMO), model SC2-12, cap. 200Kg

HYMO SC-12 Stock

437 250 Workshop hoist (SHOP CRANE), model SC500A, year 2008, 500Kg

Stock

440 300 Batch of +/- 60 tool carts (CREFORM), and accessories

Stock

446 500 Lot of +/- 30 carts (CADDIE ROLL) Soldering

zone

449 2 000 35 meters of shelving, light loads, 5 levels, width 1 m, height 2 m, and 2 high metal cabinets

Kardex zone

450 3 500 Shelving for heavy loads, 3 levels, 2X36m length, frame width 1.20m, frame height 4.50m, beam 3.60 m

Stock

451 3 500 Shelving heavy load 3 levels 2X36m length, frame width 1.20m, frame height 4.50 m, beam 3.60 m

Stock

452 3 500

Shelves for light loads, 2 levels with wood duckboards, frame width 1,04 m, frame height 4.50 meters, beam 2.90 m. Approx 70 m

Stock

453 1 500

Chemicals storage cabinet, air-conditioned, holding tanks, width 2900 mm, depth 2000 mm, height 2300 mm

Outside

455 2 000 350 cartons (approx.), dimensions 1680x1100x1010 mm and 4800 mm carton 1000x1600

Stock

456 1 500 400 pallets (approx.) Outside

470 220

6 desks (metal and melamine) + separations + cells, metal cabinets (2 roll-up doors), 7 typist chairs, 4 low cabinets (metal), 1 metal filing cabinet with 4 levels, 1 table, 1 metal coat stand, 1 artificial plant

Office rooms

471 200

1 conference table (8 modules), 16 cantilever chairs (blue), 3 cabinets (metal, roll-up doors), 1 MAGIMIX NESPRESSO coffee machine, 1 black melamine unit

Office rooms

472 350

Executive's office furniture: 1 desk (walnut and melamine), 1 conference table (walnut top), 6 office chairs (5 castors black leather, wooden armrests), 1 executive chair (high back, 5 castors, black leather), 1 storage unit, 1 coat stand, 1 felt-top table with aluminum frame

Office rooms

20

473 40

1 round table (melamine), 2 deks + separation, 1 low cabinet (metal + roll-up door), 1 felt-top table with aluminum frame, one coat stand

Office rooms

474 200

Executive's office furniture: 3 tables made of a solar panel with tube feet, 10 cantilever chairs with gray fabric, 1 high chair, 1 felt-top table

Office rooms

475 400 1 designer cabinet (6 glass doors) Office rooms

476 120 6 GATEWAY LCD flat screens, HD 2250, 22 inches

Office rooms

477 60 4 GATEWAY LCD flat screen, 19 inches

Office rooms

478 60 4 parlor chairs, red fabric, 1 low table, 1 display cabinet, 3 artificial plants

Office rooms

479 15 1 desks + cell + 1 coat stand (integrated to desk), 1 desk + metal unit + chair (in a desk)

Office rooms

480 10 Desk + chair + Metal furniture Office rooms

481 100 1 paper shredder (IDEAL), 4000 wide model

Office rooms

482 60 3 metal cabinets, roll-up doors + 1 console (in a hallway)

Office rooms

483 250

7 tables (metal, melamine top), 13 chairs (PVC, gray fabric), 5 cantilever chairs (blue fabric), 10 folding chairs (PVC, black), 5 stacking chair (wood and metal), 2 round tables with central foot, 1 low unit (melamine), 1 small cabinet (melamine), 1 display cabinet (melamine base), 2 tables

Office rooms

484 80 1 projection screen (roll up) Office rooms

485 50 4 desks + separations, 6 chairs, 1 low unit (metal) and cell

Office rooms

486 150

10 desks with partitions and cells, 9 typist chairs, 1 metal cabinet with roll-up doors, 2 low metal cabinets, 2 coat stands

Office rooms

487 80

Infirmary: 1 treatment table (meal and leatherette), 1 folding stretcher, 1 metal desk (old), 2 chairs

Office rooms

488 700 2 UPS (LIEBERT) GXT 10 KVA UPS STATION TZ 30

Office rooms

21

489 150

Batch of electronic equipment: 3 parallel ports JP LINK TL PS110P, 1 PCD adapter LINK 10/100 MBPS, 1 USB adapter D LINK 2.4 ghz, 1 mini print server NETGEAR PS101 print server, 1 PC card NETGEAR 54 Mbps Wireless WG 511, 1 IDE controller card BEST PCI-X SATA II, 1 digital camera SONY DCR SX30E, 2 switches NETGEAR 16-port, 2 switches NETGEAR 16 ports, 1 USB 2.0 NETGEAR adapter, 1 switch 8 port D LINK DGS 1008D, GEM 1 switch 4 ports

Office rooms

490 40 Three sound stations POLYCOM / POLYSPAN

Office rooms

491 700 Lot 20 computers (CPU, screen, keyboards, mouse)

Office rooms

GENERAL CONDITIONS OF SALE SALES PROCEDURE Article 1 The sale is public and shall be carried out by auction. Sale of each lot should be made to the highest bidder against payment in full. In the case of a double bid, the lot shall be put back in the sale and the public invited to bid again. Article 2 The auction shall take place in the order indicated in the catalogue. The auctioneer judicial reserves the right to deviate from the order of the catalogue, combine or divide lots, or withdraw lots put up for sale where they have not attained a suitable price, even when bids are higher than the opening. Article 3 The lots are sold in the state that they are in at the time of sale, without any guarantee or right of appeal. The buyer is deemed competent and aware of the lot status. Any photos or advertising material are not contractual. The dimensions, quantities and qualities appearing in the catalogue are for information only, and are not guaranteed. PAYMENT OF THE PRICE, FEES AND TAXES

22

Article 4 Sale price is net of tax. The buyer shall pay, in addition to the sale price, buyer’s fees of 14,4 % with VAT. To be effective, the payment, shall be made either: - in cash following the current regulations, maxi 1 000 €, - by certified check or by check accompanied imperatively by a banker’s guarantee (see model attached), - by bank transfer (method of payment required for buyers outside France) The buyers outside France must pay the amount of the French VAT (20%) as deposit. This amount will be refunded on receipt of the transport document for the buyers from EU, and on receipt of the export document for the buyers outside EU. All bank fees are at the buyer’s charge. TRANSFER OF OWNERSHIP AND GUARANTEES Article 5 Buyers are responsible for lots from the time they have been sold, but the transfer of ownership shall not be made until payment has been collected. As from the date of the sale, the seller shall not be held responsible for the partial or total disappearance of the lot sold or any damages which it may incur. REMOVAL OF AUCTIONED LOTS Article 6 Removal shall be made by the buyer within the period stated in the catalogue and/or at the time the lot was put up for sale. In the case where the buyer does not remove the lots within the time limit, the seller reserves the right to have them removed and stored at the expense of the buyer, without his engaging in any responsibility whatsoever as to the state or preservation of the lots in question. Article 7 Unless otherwise stated, gas, water, steam or electricity pipes, or any other connections to the purchased lot shall be disconnected at the site of the initial join, switch, tap or reference points marked by the seller on the pipes. RESTRICTIONS CONCERNING THE SALE OF CERTAIN EQUIPMENTS Article 8 Equipment are generally sold in conformity with technical specifications and according to French legal safety standards. This conformity is attested either by a seal of conformity (put into service after 01/15/81) or a CE seal (put into service after 01/15/93) and the certificate of compliance. Article 9 If a lot does not conform to technical specifications or to French legal safety standards, this is stated in the catalogue description or during the auction. Article 10 Non compliant equipment are sold unsuitable for use in production. They will be sold as is:

1. to a person or entity intending to use the equipment outside the EC.. 2. to a person or entity having the capacity of retailer, rebuilder or collector, committing to compliance, under its

responsibility, before transfer to an operator. 3. to a professional whose business recycling components.

23

Article 11 The provisions of articles 8 to 10 are not applicable in the case of judicial sale performed after ruling ordering the liquidation of the seller. Article 12 The measures contained in articles 8 to 11 are not applicable in the case of auctions by order of the court held after the vendor has been declared legally bankrupt. OTHER CLAUSES Article 13 These conditions are deemed to be known and accepted without reservation by the buyer. Only the general conditions of sale written in the French language govern the sale; all translations are only indicative.

* * *

LUTÈCE INDUSTRIE Tél. : +33 (0)1 39 56 07 63Consultants internationaux en ventes industrielles Fax. : +33 (0)9 70 60 56 6860, rue de Castagnary English and Spanish : +33 (0)7 81 58 50 4075015 PARIS [email protected]

Ce dépliant photos ne présente qu’un échantillon des matériels proposés à la vente.

POUR PLUS DE DÉTAILS, VEUILLEZ TÉLÉCHARGER LE CATALOGUE SUR NOTRE SITEwww.lutece-industrie.com

CONDITIONS DE VENTE : Les conditions générales de vente sont précisées au catalogue, notamment en ce qui concerne les restrictions sur la vente des matériels non conformes aux dispositions techniques ainsi qu’aux normes de sécurité légales ou règlementaires françaises. Les lots concernés sont repérés par un astérisque dans le catalogue de vente. Le paiement des lots s’effectue au comptant majoré du montant des frais 14,4% TTC.

This photo fl yer only contains a survey of the objects to be auctioned.

FOR MORE DETAILED INFORMATION, PLEASE DOWNLOAD THE CATALOGUE ON OUR WEBSITE

www.lutece-industrie.com

FRANCE

IT

GERM

ANDORRA

BELGIUM

LUX.

SWITZERLAND

Lutè

ce In

dust

rie R

.C.S

. Par

is B

530

114

412

VISITESELIFRANCE443 Rue René CassinZI Molina la Chazotte42350 La Talaudière

Lundi 14 Décembre 2015de 9h00 à 12h00et de 14h00 à 18h00

Mardi 15 Décembre 2015de 8h00 à 12h00

VIEWINGELIFRANCE

443 Rue René CassinZI Molina la Chazotte42350 La Talaudière

Monday, December 14th 2015 from 9.00 a.m to 12.00 a.m

and from 14.00 to 18.00

Tuesday, December 15th 2015from 8.00 a.m to 12.00 a.m

LA TALAUDIÈRE

MOBILIER ET DIVERS FURNITURE AND MISC.

Mobiler divers Furniture

Nombreux PC Many PC

Onduleurs Inverters

LOTS N° 476-477-491LOTS N° 470 À 489 LOT N° 488

Paiement/ Bank details

CIC - ST ETIENNE HÔTEL DE VILLE

Code Banque Code guichet N° de compte Clé RIB

10096 18017 00043527302 30

IBAN FR7610096180170004352730230

BIC CMCIFRPP

LUTÈCE INDUSTRIE Tél. : +33 (0)1 39 56 07 63Consultants internationaux en ventes industrielles Fax. : +33 (0)9 70 60 56 6860, rue de Castagnary - 75015 PARIS [email protected]

CARTE D’ENREGISTREMENTREGISTRATION CARD

………………………………………………………………………………………………………………………………

………………………………………………………………………………………………………

SOCIÉTÉ / COMPANY : ………………………………………………………………………………………………………………………………………………………………………………………………………………………………

ADRESSE / ADRESS : …………………………………………………………………………………………………………………………………………………………………………………………………………………………………

CODE POSTAL / ZIP CODE : ………………………………………………………VILLE / TOWN : ……………………………………………………………………………………………………………

TÉLÉPHONE / PHONE : ……………………………………………………………………PAYS / COUNTRY : ……………………………………………………………………………………………………

TÉLÉCOPIE / FAX : ………………………………………………………………………………E-MAIL : ………………………………………………………………………………………………………………………………

NOM / LAST NAME : ………………………………………………………………………………………………

FONCTION / FUNCTION : ………………………………………………………………………………………

MOBILE : …………………………………………………………………………………………………………………………

DATE : …………………………………………………………………………………………………………………………………

SIGNATURE :

GARANTIE BANCAIRE OUI / YES £ NON / NO £BANK GARANTEE

Montant / Amount : ……………………………………………………………

ESPÈCES / CASH OUI / YES £ NON / NO £

Montant / Amount : ……………………………………………………………

CHÈQUE / CHECK OUI / YES £ NON / NO £

Pour vous enregistrer, merci de nous remettre ce for-mulaire lors des visites ou avant la vente, avec votre carte de visite si possible.

To be registered, please give us back this document during the visit or before the auction, with your bu-siness card if possible.

N° ACHETEUR / BUYER

N° TVA INTRA. / VAT NUMBER

vente aux enchères publiques - lutece · pdf filevente aux enchères publiques...

Documents