ICSS® Group

ICSS®Group

Località S.Spirito 27027 Gropello Cairoli (PV) Tel. +.39.0382.815904

Fax +.39.0382.814260 www.icss-packaging.it

Under Roof Insulation Conserve Energy in Your Home

VENTEGO © is an ICSS

Patent

VENTEGO®

THERMO INSULATED EPS FAST LAYING SYSTEM 4 SIDES INTERLOCKING WATER PROOF, FITS EVERY TILE ZINC PLATED METAL HOLDER FIRM AND STRONGLY WELDED IMPOSSIBLE TO REMOVE BAR FIRE RESISTENT IN “ E” EUROCLASS

… … … … WATER PROOF WATER PROOF WATER PROOF WATER PROOF

VENTILATED INSULATIONVENTILATED INSULATIONVENTILATED INSULATIONVENTILATED INSULATION

FOR YOUR ROOF FOR YOUR ROOF FOR YOUR ROOF FOR YOUR ROOF DECKDECKDECKDECK!!!!

… and a fantastic glue to lay Ventego on your roof deck: P500 FLEX, the special certified adhesive for moulded EPS application in the building industry.

thiicknes

s density compression

water

absorb. steam diffusione fire

thermal

conductivity

thermal

resistance

s D σ10 Wit resistance resistance λ R

mm kg/m3

kPa % µ classe W m -1

K -1

m2

K W -1

80 25 174 2,78 62 E 0,0336 2,381100 25 174 NA 62 E 0,0336 2,976120 25 172 NA 62 E 0,0336 3,571140 25 172 NA 62 E 0,0336 4,167160 25 170 NA 62 E 0,0336 4,762180 25 168 5,02 62 E 0,0336 5,357

VENTEGO Under Roof System techical details

Made in Italy

FOR INTEGRATED W AYS

TO PROTECT YOUR ROOF

VENTEGO® GETS RID OF RAINING

WATER BUT ALSO OF ANY BACK FLOW

THROUGH 4 DIFFERENT INTEGRATED

SYSTEMS:

1. WATERCOURSES ON THE WHOLE

SURFACE OF THE PANEL

2. FORCED CHANNELLING HOLES IN THE

METAL ZINC-PLATED BAR

3. BI-LATERAL INVISIBLE RUN DOWN FOR

ANY DROPPING THAT FLOWS AMONG

THE PANELS

4. FRONT TAPPED INTERLOKING OF THE

PANELS TO AVOID FOR IT ANY

POSSIBILITY TO SLIDE DOWN

First Save on the Laying of the Panels, then Conserve Energy in Your Home newenergyalternative.com/../roof-NO GLUE OR PIN NEEDED: A MECHANICAL INTERLOCKING DOES ALL THE F IXING

In many existing and new buildings, the only

economical way to improve the thermal resistance of

the roof is by having insulation installation against the

underside of the roof surface. VENTEGO® is the

ultimate waterproof roof insulation that you need.

VENTEGO® was developed for ANY roof and ANY

structure, to ensure an unique thermal insulation and

ventilation to avoid moisture between roof and tiles.

Unlikely the majority of other roof insulations, the new

VENTEGO® system does not require any seal or

close up among each panel thanks to the perfect and

fast mechanical interlocking during the laying down.

What's more this interlocking prevents moisture to

penetrate on the roof deck in case of water flowing

back when there is huge snow and ice blocking the

eaves. The zinc plated metal bar has been engineered

to guarantee ventilation under the tiles: insulate and

ventilate over the roof deck is not a problem anymore.

A real Step forward for your Roof Deck Insulation Under all points of view THE ULTIMATE LOW COST SOLUTION TO CONSERVE ENERGY IN THE

EXIXTING AND NEW BUILDINGS ALL OVER EUROPE

LONG LASTING W ELDED METAL BAR FOR A BETTER SAFETY DURING THE LAYING

Safe laying of the insulation VENTEGO ® and long

lasting safety in holding the tiles throughout the years

Thanks to a special zinc plated metal bar with several

welding points, VENTEGO ® does not open or deform

during the laying over the roof deck (those bars are

normally used as steps by the operators during the laying

down). The special bullet welding holds the tiles

throughout the seasons regardless of the different

weather conditions.

NOT REMOVABLE BAR (CO-MOULDED)

The VENTEGO ® metal bar is co-moulded inside the

EPS panel and impossible to remove without destroying

the panel itself. This ensure strength and lasting.

PERFECT VENTILATION

VENTEGO® has been engineered with a unique and

special shape that allows a micro-ventilation all over the

roof deck in order to prevent any risk of serious moisture

damage if the building is located in a climate where the

outside temperature can be much colder than the inside

temperature. Thanks to this special design of the metal

bar, VENTEGO® guarantees better thermal insulation

performances without any thermal bridge. The ventilation

beneath the tiles provides proper attic insulation and

soffit ventilation to go with the metal roofing system.

A CHALLENGE

There is a risk of

moisture damage if the

building is located

in a climate where the

outside temperature can

be much colder than the

inside temperature.

In such locations,

the under roof insulation

must have an effective

vapour barrier on its inner

surface.

THE REAL RISK

If the outer roof surface is

also impermeable, a region is created

between the outer roof surface and the

vapor barrier that can trap and

hold moisture. Persistent moisture will

eventually destroy any type of roof

structure, and may even cause your

home roof structure collapse.

THE SOLUTION

Because of this potential problem,

VENTEGO® is the safest solution because

it provides a reliable moisture

venting for the space above the insulation

and under the tiles. Even if the outside air

dew-point temperature is always higher than

the inside , VENTEGO® is the most

effective solution for a perfect ventilation.

Thickness: Panels goes from 80 to 180 mm (dimension changes ev ery 20 mm) Inter tiles distance available: cm. 33, cm 34.2, cm 35.2, cm 36, cm 37, cm 39, cm 4 1.5

STANDARD WHITE EPS OR GRAFITE ADDED: A ROOF INSULATION THAT WILL MATCH ALL NEEDS Nothing new: expanded polystyrene panels outside the walls offer one the best insulation for any

existing house. This is the reason why VENTEGO® is made by the same material of the most

common house insulation system, expanded polystyrene , both white and with graphite.

Polystyrene offers fantastic thermal and mechanical properties for an outstanding insulation

performances: thanks to expanded polystyrene, then, the effects of the external weather

are eliminated for the most part. The proper under roof insulation installation surely will

conserve energy in your home. For this reason VENTEGO® as many others insulating

systems, can be granted of some tax incentives in many European countries.

Release 1.2 November 2011