veritas commandcentralâ„¢ hardware and software compatibility list

CommandCentral 5.2

Hardware and Software Compatibility List

Mon Oct 04 09:04:06 PDT 2010

Documentation version 5.2.0

toc

CommandCentral Storage System and OS Requirements

Switches

Storage Devices

HBAs

Miscellaneous Devices

Software Compatibility

SAN device vendor hardware and software information frequently changes. It is strongly recommended that you

download the latest version of this document from the Symantec Web site:

http://www.symantec.com/docs/S:TECH139892

TechNotes referenced in this document are available at:

http://www.symantec.com/enterprise/support/index.jsp

Copyright © 2010 Symantec Corporation. All rights reserved. Symantec, the Symantec logo, Veritas, CommandCentral, NetBackup, SANPoint, SANPoint Control,

and Storage Foundation are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks

of their respective owners.

1

http://www.symantec.com/docs/S:TECH139892

http://www.symantec.com/enterprise/support/index.jsp

2

req

CommandCentral Storage - System and OS Requirements

Component OS* System+

Management Server

Microsoft Windows 2000 (SP3 or later) Server, Advanced Server,Datacenter Server

1GHz Quad processor + 8GB RAM (16GB for CommandCentralStorage + Storage Change Manager) Pentium-based servers:

Pentium 4 64-bit: Xeon/Opteron

Microsoft Windows 2003 Server: Standard Edition, DatacenterEdition (32-bit and 64-bit), Enterprise Edition (32-bit and 64-bit),

Web Edition



Microsoft Windows 2008 R2 Server: Standard Edition, DatacenterEdition, Enterprise Edition, Web Edition (64-bit)



Microsoft Windows 2008 Server: Standard Edition, DatacenterEdition, Enterprise Edition, Web Edition (32 and 64-bit)



Solaris 8, 9,10 *2&*8 1GHz UltraSPARC® IIIi dual processors + 8GB RAM (16GB forCommandCentral Storage + Storage Change Manager)

VMware Windows Guest OS - Windows 2003 server (32-bit and 64-bit) , Windows 2008 server (32-bit and 64-bit)

ESX server 3.5 or later, Guest OS should have a minimum of 2processors + 8GB RAM (16GB for CommandCentral Storage +

Storage Change Manager)

Standard Agent

HP-UX 11i v1 (11.11) PA-RISC 2.0 and PCI HBA based systems: Superdome, V Class,N Class, L Class , 400/500, rp-series + 16/512MB RAM

HP-UX 11i v2 (11.23) Itanium 2 based systems: Integrity servers + 16/512MB RAM

HP-UX 11i v2 0904 (11.23 PI) PA-RISC 2.0 and PCI HBA based systems: Superdome, V Class,N Class, L Class , 400/500, rp-series + 16/512MB RAM

HP-UX 11i v3 (11.31 PI) *5 PA-RISC 2.0 and PCI HBA based systems: Superdome, rp-series+ 16/512MB RAM

HP-UX 11i v3 (11.31) *5 Itanium 2 based systems: Integrity servers + 16/512MB RAM

IBM AIX 5.2 *3 Pseries + 16/512MB RAM

IBM AIX 5.3 *4&*7 P5 5xx + 16/512MB RAM

IBM AIX 6.1 *7 P5 5xx + 16/512MB RAM

Red Hat Linux Advanced Server 3.0 (32-bit) 433 MHz Intel x86 equivalent + 256/512MB RAM

Red Hat Linux Advanced Server 4.0 (32bit) 433 MHz Intel x86 equivalent + 256/512MB RAM

Red Hat Linux Enterprise Server 3.0 (32-bit) 433 MHz Intel x86 equivalent + 256/512MB RAM

Red Hat Linux Enterprise Server 4.0 (32-bit,64-bit) 433 MHz Intel x86 equivalent + 256/512MB RAM

Red Hat Linux Enterprise Server 5.0 (32-bit, 64-bit) *6 433 MHz Intel x86 equivalent + 256/512MB RAM

Solaris 8, 9,10 *2 Ultra 5 or higher, including SPARC clone equivalents from Fujitsu+ 256/512MB RAM *1

Suse Linux Enterprise Server 10 (32-bit, 64-bit) *5&*6 433 MHz Intel x86 equivalent + 256/512MB RAM

Suse Linux Enterprise Server 9 (32-bit, 64-bit) *5&*6 433 MHz Intel x86 equivalent + 256/512MB RAM

Windows 2000 (SP3 or later) Server, Advanced Server, DatacenterServer 733 MHz Pentium 4 + 256/512MB RAM 1

Windows 2003 Server: Standard Edition, Datacenter Edition (32and 64-bit), Enterprise Edition (32 and 64-bit), Web Edition

733 MHz + 256/512MB RAM 1 Pentium-based servers: Pentium 464-bit: Xeon/Opteron

Windows 2008 R2 Server: Standard Edition, Datacenter Edition,Enterprise Edition, Web Edition (64-bit)

1 GHz + 512MB RAM 1 GHz (x86 processor) or 1.4 GHz (x64processor) 64-bit: Xeon/Opteron

Windows 2008 Server: Standard Edition, Datacenter Edition,Enterprise Edition, Web Edition (32 and 64-bit) *5


Push Install Utility

Windows 2000 (SP3 or later) Server, Advanced Server, DatacenterServer 733 MHz Pentium 4 + 512MB RAM

Windows 2003 Server: Standard Edition, Datacenter Edition (32and 64-bit), Enterprise Edition (32 and 64-bit), Web Edition

733 MHz + 512MB RAM Pentium-based servers: Pentium 4 64-bit: Xeon/Opteron

Windows 2008 Server: Standard Edition, Datacenter Edition,Enterprise Edition, Web Edition (32 and 64-bit)


Browser SupportSolaris Mozilla 1.7

Windows Microsoft Internet Explorer 6.x, 7.x Mozilla Firefox 1.07, 1.5,2.0.0.x or 3.0

3

swi1

Control Host

Solaris 9, 10 SPARC + 512 MB RAM

Windows server 2000 (SP3 or Later)Supported editions include: Server, Advanced Server, and Datacenter Server 733MHz + 512MB RAM

Windows server 2003 Supported editions include: 32-bit: Standard,Datacenter, Enterprise, and Web; 64-bit(Xeon/Opteron): Datacenter and Enterprise 733MHz + 512MB RAM

Windows server 2008 Supported editions include (32-bit and 64-bit): Standard, Datacenter, Enterprise, and Web 1GHZ + 512MB RAM

† Minimum recommended configuration. Memory requirement is in addition to what is already being consumed by other applications on the system.

*1 For Memory Requirements for CommandCentral Storage managed hosts, the first number is without Array Management, the second is with Array Management.

*2 CommandCentral Storage package is not recommended to be installed on non-global zones on the Solaris OS platform.

*3 CommandCentral Storage requires ML7 or later for AIX 5.2 and ML3 or later for AIX 5.3.

*5 Array Management and NetApp Unified Storage Discovery capabilities are not supported on Red Hat Linux Enterprise Server 5.0, Suse Linux Enterprise Server 9 & 10, HPUX 11i v3 and VMware ESX platforms.

*6 CommandCentral Managed Host is not supported and will fail to install if SE Linux is enabled on Linux systems.

*7 For AIX hosts with LPARs, Virtual devices are not supported.

*8 SUN T-series servers are not recommended.

* Refer to Release Notes to verify appropriate patch levels

4

CommandCentral Storage - Switches

SwitchVendor

Model Firmware Ancillary SW OS Platform Features SNMPMIB

MonitoringAlerting

Notes

Brocade

DCX Backbone

6.0.1a, 6.1.0c, 6.1.0f,6.1.0j, 6.1.1, 6.1.1d,6.1.2b, 6.2.0, 6.2.0g,6.2.1b, 6.2.2, 6.2.2a,6.3.0c, 6.3.1

SilkWorm 120004.4.0b, d, e, 4.4.15.0.1a, b, 5.0.3, 5.0.4,5.0.5c, 5.0.5d, 5.0.5f

DiscoveryHard Zoning

Multi-Zone SetZoning

PortEnable/Disable

Trunking

SilkWorm 200E

5.0.1, 5.0.3, 5.0.5c,5.0.5d, 5.0.5f, 5.1.0,5.1.0a, 5.1.0d, 5.2.0a,5.2.1b, 5.3.0, 5.3.1a,5.3.1b, 5.3.2, 6.0.0,6.0.1a, 6.1.0, 6.1.0c,6.1.0f, 6.1.0j, 6.1.1,6.1.1d, 6.1.2b, 6.2.0,6.2.0g, 6.2.1b, 6.2.2,6.2.2a

SilkWorm 24002800 2040 22402050 2250

2.6.1, 2.6.1a, b, c 2.6.2a, b, c, d

Discovery HardZoning Multi-ZoneSet Zoning PortEnable/Disable

Trunking

SilkWorm 24000

4.4.0b, d, e 5.0.1a, b,5.0.3, 5.0.4, 5.0.5c,5.0.5d, 5.0.5f, 5.1.0,5.1.0a, 5.1.0d, 5.2.0a,5.2.1b, 5.3.0, 5.3.1a,5.3.1b, 5.3.2

Silkworm 300

6.0.1a, 6.1.0c, 6.1.0f,6.1.0j, 6.1.1, 6.1.1d,6.1.2b, 6.2.0, 6.2.0g,6.2.1b, 6.2.2, 6.2.2a,6.3.0c, 6.3.1

SilkWorm 3200,3800

3.1, 3.1.1, 3.1.1b, d3.1.2, 3.1.3, 3.1.3b3.2.0a, 3.2.1

SilkWorm 3250,3850

4.4.0b, d, e 5.0.1a, b,5.0.3, 5.0.4, 5.0.5c,5.0.5d, 5.0.5f, 5.1.0,5.1.0a, 5.1.0d, 5.2.0a,5.2.1b, 5.3.0, 5.3.1a,5.3.1b, 5.3.2

5


SwitchVendor


MonitoringAlerting

Notes

SilkWorm 3900

4.4.0b, d, e, 4.4.15.0.1a, b, 5.0.3, 5.0.4,5.0.5c, 5.0.5d, 5.0.5f,5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.2

Brocade SMI providerv120.7.2b, v120.8.0,v120.10.0 (Refer theNotes section for Proxyswitch firmwarecompatibility with SMIprovider)

Windows2003,Windows2000,Windows2008,Solaris

8,Solaris9,Solaris 10

FA MIB3.0 FEMIBBrocadeFC MIB

Supported

CommandCentral 5.2 has SMI-S only configuration option for Brocade. Discovery of switches usingBrocade API was removed from the CommandCentral 5.1 onwards as Brocade has EOLed theseAPI interfaces.

For users migrating from CommandCentral 5.0 to the 5.2 version, its recommended to convert thediscovery method from API to SMI-S. Users need to remove the old API configuration from theCommandCentral Console and configure Explorers with the SMI-S agents using 5.0MP1_RP6.Contact Symantec Technical Support for more details.

Minimum version of FOS firmware for Proxy switch is 5.3.1a, 6.x is the recommended version(SMI-S requirement). For the Brocade SMIS Agent v120.8.0 and above, the minimum Proxy switchfirmware is FOS 6.x. Use the Brocade SMIS Agent 120.7.2b for Proxy switch with 5.3.1a or 5.3.2firmware.

Always pick the highest version of firmware in the Fabric for the proxy switch.

Users may need to upgrade switch firmware while they move from API mehod of discovery to SMISdiscovery method.

Install SMI-S agent(s) on Windows or Solaris hostsProxy switches are configured using the SMI-S agent GUIProxy switches must have user credentials with "admin" permission

CommandCentral discovers these Brocade switches, as well as their role in the fabric(principal/subordinate), total/free ports, port status, objects connected to each port, zoninginformation, and more.

Note: Zoning license is required on switches for zoning administration to be functional inCommandCentral Storage.Fabric and Zoning Management of switches requires an out-of-band connection.

~MPR supports basic Discovery, LSAN zoning. No monitoring support

Performance monitoring is not supported with SNMP V3.

SilkWorm 4100

4.4.0b, d, e 5.0.1a, b,5.0.3, 5.0.4, 5.0.5c,5.0.5d, 5.0.5f, 5.1.0,5.1.0a, 5.1.0d, 5.2.0a,5.2.1b, 5.3.0, 5.3.1a,5.3.1b, 5.3.2, 6.0.0,6.0.1a, 6.1.0, 6.1.0c,6.1.0f, 6.1.0j, 6.1.1,6.1.1d, 6.1.2b, 6.2.0,6.2.0g, 6.2.1b, 6.2.2,6.2.2a, 6.3.0c, 6.3.1

SilkWorm 48000

5.0.5c, 5.0.5d, 5.0.5f,5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.2,6.0.0, 6.0.1a, 6.1.0,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2, 6.2.2a, 6.3.0c,6.3.1



PortEnable/Disable

Trunking

Silkworm 4900

5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.2,6.0.0, 6.0.1a, 6.1.0,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2, 6.2.2a, 6.3.0c,6.3.1

6


SwitchVendor


MonitoringAlerting

Notes

Silkworm 5000

5.2.1, 5.3.1a, 5.3.1b,5.3.2, 6.0.0, 6.0.1a,6.1.0, 6.1.0c, 6.1.0f,6.1.0j, 6.1.1, 6.1.1d,6.1.2b, 6.2.0, 6.2.0g,6.2.1b, 6.2.2, 6.2.2a,6.3.0c, 6.3.1

Silkworm 5100

6.0.1a, 6.1.0c, 6.1.0f,6.1.0j, 6.1.1, 6.1.1d,6.1.2b, 6.2.0, 6.2.0g,6.2.1b, 6.2.2, 6.2.2a,6.3.0c, 6.3.1

Silkworm 5300

SilkWorm 6400 2.6.1, 2.6.1a, b, c2.6.2a, b, c, d

SilkWorm 7500

5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,6.0.0, 6.1.0, 5.3.1a,5.3.1b, 5.3.2, 6.0.1a,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2, 6.2.2a, 6.3.0c,6.3.1

SilkWorm AP7420MultiprotocolRouter (MPR)

7.3.0c7.4.x

Brocade andMcDATA mixed

fabrics(Interoperability)

Brocade FOSFirmware: 5.x

McData EOS Firmware:9.6.2 or higher.OSMS Must be enabledon all McData Switches

EFCM : 9.7.1,2,3 or 4

Fabric DiscoveryMethod:McData SMIS2.6.2,2.7.1Brocade API ( Requiresa CCS 5.0MP1RP6Control Host )

Interopmode :Interopmode 1

Note: McData switches need to be discovered via McData SMI-S in Proxy Mode to EFCM.Brocade switches need to be discovered via Brocade API (a CCS 5.0MP1RP6 Control Host).Performance monitoring is not supported with SNMP V3.

Brocade andMcDATA models

Brocade FOSFirmware: 6.x

McData EOS Firmware:9.6.2 or higher.OSMS Must be enabledon all McData Switches

DCFM: 10.1.x, 10.3.3

Fabric DiscoveryMethod:McData SMIS2.6.2,2.7.1Brocade SMIS 120.8.0Brocade SMIS 120.10.0

Interoperability Modes:Interopmode 3 (OpenFabric)

Windows2003,Windows2008,Solaris9,Solaris 10

Monitoring isnot supportedfor McDataSwitches withDCFM

Note: McData switches need to be discovered via McData SMI-S in Proxy Mode to DCFM.Brocade switches need to be discovered via Brocade SMI Agent.Performance monitoring is not supported with SNMP V3.

EFCM : 9.7.1,2,3 or 4

Fabric DiscoveryMethod:McData SMIS2.6.2,2.7.1Brocade SMIS 120.8.0Brocade SMIS 120.10.0Interoperability Modes:Interopmode 2 (McDataFabric),Interopmode 3 (OpenFabric)

Note: McData switches need to be discovered via McData SMI-S in Proxy Mode to EFCM.Brocade switches need to be discovered via Brocade SMI Agent.Performance monitoring is not supported with SNMP V3.

7


SwitchVendor


MonitoringAlerting

Notes

Cisco

MDS 9120 MDS9124 MDS 9134MDS 9140

1.3.3c, 1.3.4a, b 2.01b,2.1.1a, b, 3.0.1, 3.0.3b3.1.2a, 3.1.3a, 3.2.2.c,3.3.1a, 3.1.1c

SNMP

Solaris 8,Solaris9,Solaris

10,Windows2000,Windows2003,Windows

2008

DiscoveryHard Zoning*

Multi-Zone SetZoning Port

Enable/DisableTrunking

MDSMIBSNMPIF MIB

SupportedVSAN, Zone, Port Bundle (Port Channels), Module, and Slot discovery supported. VSAN, and Zonemanagement supported. SNMP v3 supported.*Discovery of hard zones supported.

MDS 9216 MDS9506 MDS 9509MDS 9513

1.2, 1.3.4a, b 2.0.1b,2.1.1a, b 3.0.1, 3.0.3b3.1.2a, 3.1.3a, 3.2.2.c,3.3.1a, 3.3.1c ,4.1(1b)(MDS 9513 only)

8


SwitchVendor


MonitoringAlerting

Notes

EMC(Connectrix)

DS-8B2, 16B23.1, 3.1.1, 3.1.1b, d3.1.2, 3.1.3, 3.1.3b3.2.0a, 3.2.1

DS-32B2 4.4.0b, d, e, 4.4.15.0.1a, b, 5.0.3, 5.1.0

Brocade SMI providerv120.7.2b, v120.8.0,v120.10.0 (Refer to theNotes section for Proxyswitch firmwarecompatibility with SMIprovider)



ED-48000B

5.0.5c, 5.0.5d, 5.0.5f,5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.2,6.0.0, 6.0.1a, 6.1.0,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2a, 6.3.0c, 6.3.1

Windows2003,Windows2000,Windows2008,Solaris

8,Solaris9,Solaris 10

FA MIB3.0 FAMIB 3.1

Supported

CommandCentral 5.2 has SMI-S only configuration option for Connectrix.

For users migrating from CommandCentral 5.0 to the 5.2 version, its recommended to convert thediscovery method from SWAPI to SMI-S. Users need to remove the old SWAPI configuration fromthe CommandCentral web GUI and configure Explorers with the SMI-S agents using 5.0MP1_RP6.Contact Symantec Technical Support for more details.

For EMC-B series fabrics, the minimum version of FOS firmware for Proxy switch is 5.3.1a, 6.x is therecommended version (SMI-S requirement). For the Brocade SMIS Agent v120.8.0, the minimumProxy switch firmware is FOS 6.x. Use the Brocade SMIS Agent 120.7.2b for Proxy switch with5.3.1a or 5.3.2 firmware.Other EMC-B models listed in this document which do not have the minimum firmware version canbe used as target switches. Always pick the highest version of firmware in the Fabric for the proxyswitch. Users may need to upgrade switch firmware while they move from API mehod of discovery toSMIS discovery method. Install SMI-S agent(s) on Windows or Solaris hosts. Proxy switches areconfigured using the SMI-S agent GUI. Proxy switches must have user credentials with "admin"permission.

For EMC-M series fabrics, the McData SMI Agent 2.6.2 and 2.7.1 are compatible with EFCM9.7.1,2,3 or 4 and EFCM 9.6.xIt is not recommended to install SMI-S agent on the CommandCentral Management Server. SMI-Sagent should be installed preferably on a Windows host. Host on which EFCM is running may beused. One SMI-S agent per EFCM is the recommended scale. Its required to uninstall theSWAPI Bridge Agent.

CommandCentral Storage discovers these switches, as well as their role in the fabric(principal/subordinate), total/free ports, port status, objects connected to each port, zoninginformation, and more.

Note: Zoning license is required on switches for zoning administration to be functional inCommandCentral Storage.

Fabric and Zoning Management of switches requires an out-of-band connection.

Discovery and management of EMC-B series fabrics require installation of a qualified Brocade SMI-Sprovider configured to the Brocade switch explorer on a CommandCentral Storage host.

Discovery and management of EMC M-series fabrics require installation of a qualified McDATA SMI-S provider configured to the McDATA Switch explorer on a CommandCentral host.

McDATA SMI-S provider v2.0 or later versions support zoning discovery and management in fabriczoning mode only.Global zones and zonesets must be imported to fabric zoning libraries for them to be discovered andmanaged.Active zones and zoneset must be duplicated into inactive zones and zoneset before they can bemanaged in direct switch connection mode.

Monitoring of switches discovered through McDATA SMI-S provider in proxy mode requires setting"EFCMIPAddress".Monitoring of switches discovered through McDATA SMI-S provider in direct switch connection modeis not supported.

Monitoring is not supported with DCFM.

9


SwitchVendor


MonitoringAlerting

Notes

DS-24M2 DS-32M2 ED-140M

6.00.00, 6.01.00,6.02.00 7.01, 7.01.028.00.00, 8.01.00,9.01.00, 9.02.00,9.06.00, 9.07.02,9.09.03, 9.09.06,9.09.07

McDATA SMI-S Agent2.6.2, 2.7.1 (BrocadeSMI agent for EOSproducts)

DiscoveryMulti-Zone Set

Zoning PortEnable/Disable

DS-12000B4.4.0b, d, e, 4.4.15.0.1a, b, 5.0.3, 5.0.4,5.0.5c, 5.0.5d, 5.0.5f

Brocade SMI providerv120.7.2b, v120.8.0,v120.10.0 (Refer to theNotes section for Proxyswitch firmwarecompatibility with SMIprovider)

Discovery HardZoning Multi-Zone

Set Zoning

DS-220B, DS-4900B

5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.2,6.0.0, 6.0.1a, 6.1.0,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2a, 6.3.0c, 6.3.1(6.3.x not supported byDS-220B)

10


SwitchVendor


MonitoringAlerting

Notes

McDATA

ES-3016 ES-3032 ES-3216ES-3232 ED-6064 ED-6140

6.00.00, 6.01.00,6.02.00 7.01.00,7.01.02 8.00.00,8.01.00, 9.01.00,9.02.00, 9.06.00,9.07.02, 9.08.01,9.09.03 (6140,6064,323only),9.09.06 (6140,6064,323only),9.09.07 (6140,6064,323only)

Intrepid 10000**6.03.01, 6.05.00,9.01.00, 9.02.00,9.06.00, 9.07.02

Sphereon 4300

9.01.00, 9.02.00,9.06.00, 9.07.02,9.08.01, 9.09.03,9.09.06, 9.09.07

McDATA SMI-S Agent2.6.2 Compatible withEFCM 9.7.1,2,3 or 4or EFCM 9.6.x,SMI-S Agent 2.7.1

Solaris 8,Solaris9,Solaris

10,Windows2000,Windows2003,Windows

2008


Zoning PortEnable/Disable

FA MIB3.0 FAMIB 3.1

Supported

CommandCentral 5.2 has SMI-S only configuration option for McData. Discovery of switches usingSWAPI is removed from the CommandCentral 5.1 release onwards as Brocade has EOLed theseAPI interfaces.

For users migrating from CommandCentral 5.0 to the 5.2 version, its recommended to convert thediscovery method from SWAPI to SMI-S. Users need to remove the old SWAPI configuration fromthe CommandCentral web GUI and configure Explorers with the SMI-S agents using 5.0MP1_RP6.Contact Symantec Technical Support for more details.

SMI Agent 2.6.2 is compatible with EFCM 9.7.1, 9.7.2, 9.7.3, 9.7.4 or 9.6.x

It is not recommended to install SMI-S agent on the CommandCentral Management Server.

SMI-S agent should be installed preferably on a Windows host. Host on which EFCM is running maybe used.One SMI-S agent per EFCM is the recommended scale.

Its required to uninstall the SWAPI Bridge Agent.

Refer to McData SMI-S Agent 2.6.2 Users Guide. Chapter 1, page 8 "Memory and CPUrecommendations. contains SMIS Memory/CPU/Sizing information and JVM resizing instructions.

Monitoring of switches discovered through McDATA SMI-S provider in proxy mode requires setting"EFCMIPAddress".Monitoring of switches discovered through McDATA SMI-S provider in direct switch connection modeis not supported.

i10K switches with virtualization is not supported.Monitoring is not supported for i10k switches for firmware 9.x.Monitoring is not supported with DCFM.Performance monitoring is not supported with SNMP V3.

Sphereon 4400,Sphereon 4700

8.00.00, 8.01.00,9.01.00, 9.02.00,9.06.00, 9.07.02,9.08.01, 9.09.03,9.09.06, 9.09.07

Sphereon 4500

6.00.00, 6.01.00,6.02.00 7.01.00,7.01.02 8.00.00,8.01.00, 9.01.00,9.02.00, 9.06.00,9.07.02, 9.08.01,9.09.03, 9.09.06,9.09.07

11


SwitchVendor


MonitoringAlerting

Notes

QLogic

SAN BOx2- 642.0.0.033.05.0.1.10.0

SANbox 5200,SANbox, 5600,SANbox 5602

5.0.1.10.0 N/A

Windows 2000,Windows 2003,Windows 2008,Solaris 8,9,10AIX, HP-UX,

Linux


discovery

FA MIB3.0

NotSupported

Topology and zoning discovery through GS explorer.No zoning or port management.Monitoring is not supported.

Each QLogic switch maintains its own zoning database. ONLY inactive zones and zonesets on theswitch inband connected to a CommandCentral Storage host will be discovered."Orphaned Zonesets" are not supported.

SANbox 9000 6.6.0.14.0

SANBox2-8,SANBox2-16

2.0.0.033.05.0.1.10.0

12

sto

CommandCentral Storage - Storage Devices

StorageDeviceVendor

Model OS Platform Monitoring &Alerting

Management/ Extendedfeatures

Ancillary SW Notes

3PARInserv E200,T400

Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008

Environmental Deep Mapping Firmware 2.2.2 (with Embedded SMI-S 1.1provider)

Requires a network connection to the arrays and the CIMVAIL Explorer.The CIM Agent (SMI-S provider) runs on the array controller itself (in other words, it isembedded with controller software).

The embedded SMI-S provider, by default, is turned off. This needs to turned on bylogging into thearray if you want to manage this array via CommandCentral Storage.

Thin Provisioning and array management operations are not supported.

InServ S400X

13


StorageDeviceVendor



Ancillary SW Notes

EMC

AX100 AX150 Environmental~Performance

LUN Creation and DeletionLUN MaskingMulti LUN MaskingRSV Creation and DeletionDeep MappingSnapshot Discovery (SnapViewSnapshots, SnapView Clone,MirrorView (Sync))

NAVCLI 6.19, 6.22, 6.24, 6.26, 6.29 NAVISECCLI (Secure CLI mode) also supported.

Celerra NS20,NS80, NSX,NS700G,NS500G,NS20FC, NS700

Not SupportedVirtual Data mover.Celerra Array management is notsupported.

DART 5.5.26.4 - 5.6.43

Thin provisioning and Data de-duplication not supported.

iSCSI discovery is supported from both managed server platform. iSCSI storagecorrelation issupported on Windows only and requires use of Microsoft iSCSI initiator version 2.02.

Supports correlation of the physical disks of the Celerra storage system and theirbackend arrayvolumes (LUNs).

Checkpoint and replication is not supported for CCS 5.2.

CLARiiON CX4


NAVCLI 6.28, 6.29 CX-4 arrays need minimum version of Navicli 6.28.

CLARiiONCX200 CX400CX600CLARiiONCX300 CX500CX700

Environmental~Performance

LUN Creation and DeletionLUN MaskingMulti LUN MaskingRSV Creation and DeletionDeep MappingSnapshot Discovery (SnapViewSnapshots, SnapView Clone,MirrorView (Sync))

NAVCLI 6.7, 6.16, 6.19, 6.24, 6.26, 6.29

See the EMC Support Matrix to determine which storage array firmware version iscompatible with a given NAVICLI version.

Network connectivity is required between the storage arrays and the host whereNAVICLI is installed.

The storage array configuration must be "Shared Access Configuration" whichrequires Access Logix support enabled.

NAVISECCLI (Secure CLI mode) also supported.

CLARiiON CX3-10 CX3-20CX3-40 CX3-80

NAVCLI 6.19, 6.22, 6.24, 6.26, 6.28, 6.29 NAVISECCLI (Secure CLI mode) also supported. Management operations are notsupported for CX4 arrays.

CLARiiONFC4700FC4700-2

LUN Creation and DeletionLUN MaskingMulti LUN MaskingDeep Mapping

NAVCLI 6.7, 6.16, 6.19, 6.24, 6.26

See the EMC Support Matrix to determine which storage array firmware version iscompatible with a given NAVICLI version.

Network connectivity is required between the storage arrays and the host whereNAVICLI is installed.

The storage array configuration must be "Shared Access Configuration", whichrequires Access Logix support enabled.NAVISECCLI (Secure CLI mode) also supported.

14


StorageDeviceVendor



Ancillary SW Notes

DMX 800 10002000 3000DMX-3 DMX-4

Windows2000,Windows2003,Windows2008,Solaris8,Solaris 9,Solaris10,HP-UX 11iv2*,AIX 5.2,AIX5.3,Linux Red HatAS/ES v3.0, v4.0(32 bit)**

LUN Creation and DeletionLUN MaskingLUN BindingMulti LUN MaskingMulti LUN BindingDeep MappingSnapshot(BCV, Clone, Snap)DiscoverySRDF Discovery *1Virtual provisioning (DMX-3 andDMX-4)

EMC Solutions Enabler 5.5, 6.0, 6.2, 6.3.1, 6.4,6.5.1, 7.0, 7.1.2

For discovery, the VCMDB LUN must be visible to the host where the EMC SolutionsEnabler and VolumeLogix (if required) are installed. With Enginuity 5670 and later,access to the VCM database does not require that the VCM device be mapped to anFA and presented to a server, as long as there are gatekeepers available.

The discovery (but no array management) is supported via SYMAPI server as well, inwhich the case VCMDB LUN must be visibleto the host where SYMAPI server is installed. The CommandCentral Symmetrixexplorer still needs the EMC Solutions Enabler (SYMCLI) to beinstalled on the host (where the explorer is running) and it (SYMCLI) should beconfigured to access the SYMAPI server host over IP.

Do not run more than one tool (GUI or CLI) at the same time which alters the devicemasks on an array, because this can corrupt array configuration data.

CommandCentral cannot discover ESCON type Front End Directors; only FibreChannel type Front End Directors are supported.

Performance Reporting is only supported on Windows and Solaris hosts.

*For HP-UX 11i v2, for the list of the required OS patches/updates please refer theCommandCentral StorageRelease Notes (System Requirements).

6.3.0 SYMCLI has issues with snapshot discovery, 6.3.1 is recommended. EMC Solutions Enabler 6.0.2 qualified for AIX 5.2 ML05 only.For non-meta LUN deletion, requires 5670 with EMC Solutions Enabler 5.3 or above.

1 If EMC Symmetrix/DMX has SRDF enabled, then SYMCLI 6.2 or later is requiredfor the SRDF discovery.

Symmetrix3000 50008000

Windows2000,Windows2003,Windows2008,Solaris8,Solaris 9,Solaris10,HP-UX 11iv2,AIX 5.2,AIX5.3,Linux (AS/ES)3.0,Linux (AS/ES)4.0 32-bit

Environmental ~Performance

LUN Creation and DeletionLUN MaskingLUN BindingMulti LUN MaskingMulti LUN BindingDeep MappingSnapshot(BCV) DiscoverySRDF Discovery *1

EMC Solutions Enabler 5.5, 6.0, 6.2, 6.3.1, 6.4,6.5.1, 7.0, 7.1


The discovery (but no array management) is supported via SYMAPI server as well, inwhich the case VCMDB LUN must be visibleto the host where SYMAPI server is installed. The CommandCentral Symmetrixexplorer still needs the EMC Solutions Enabler (SYMCLI) to beinstalled on the host (where the explorer is running) and it (SYMCLI) should beconfigured to access the SYMAPI server host over IP.



Performance Reporting is only supported on Windows and Solaris hosts.

*For HP-UX 11i v2, for the list of the required OS patches/updates please refer theCommandCentral StorageRelease Notes (System Requirements).

6.3.0 SYMCLI has issues with snapshot discovery, 6.3.1 is recommended. EMC Solutions Enabler 6.0.2 qualified for AIX 5.2 ML05 only.For non-meta LUN deletion, requires 5670 with EMC Solutions Enabler 5.3 or above.1 If EMC Symmetrix/DMX has SRDF enabled, then SYMCLI 6.2 or later is requiredfor the SRDF discovery.

15


StorageDeviceVendor



Ancillary SW Notes

VMAX

Windows2000,Windows2003,Windows2008,Solaris8,Solaris 9,Solaris10,HP-UX 11iv2*,AIX 5.2,AIX5.3,Linux Red HatAS/ES v3.0, v4.0(32 bit)**

Management Not SupportedDeep MappingSnapshot(BCV, Clone, Snap)DiscoverySRDF DiscoveryVirtual Provisioning

EMC Solutions Enabler 7.0, 7.1.2


Discovery of masking information supported only if auto-provisioning groups are usedfor masking. StorageAdmin privileges are required for the explorer host if authorizationis enabled on the array for full masking discovery.

The discovery (but no array management) is supported via SYMAPIserver as well, in which the case VCMDB LUN must be visibleto the host where SYMAPI server is installed. The CommandCentral Symmetrixexplorer still needs the EMC Solutions Enabler (SYMCLI) to beinstalled on the host (where the explorer is running) and it (SYMCLI) should beconfigured to access the SYMAPI server host over IP.



Performance Reporting is only supported on Windows and Solaris hosts.*For HP-UX 11i v2, for the list of the required OS patches/updates please refer theCommandCentral Storage Release Notes (System Requirements).

Discovery of DLDEV devices is not supported.

Engenio E2400, E5600XBB


EnvironmentalPerformance

LUN BindingLUN Creation and DeletionMulti LUN BindingMulti LUN MaskingRSV Creation and DeletionDeep Mapping

Engenio SMIS Provider (SMI-S 1.1 basedCIMOM): v9.16.G0.17, v9.16.G0.34, v9.19.G0.17, v9.19.G0.19, v9.23.G0.00, v9.70.G0.02, v10.10.G0.04, v10.35.G0.00, v10.50.G0.04

Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL explorer is installed.

Download the Engenio SMI-S provider from here:http://www.lsi.com/storage_home/products_home/external_raid/management_software/smis_provider/index.htmlv10.10.G0.04 supports only discovery. No management is supported.

Fujitsu

ETERNUS3000 100 300500 600 700ETERNUS4000 100 300400 500 600ETERNUS6000 700 9001100ETERNUS8000 900 11002200

Storage Vendors CIM object Manager (CIMOM,SMIS-S 1.1 based): v1.40.2(This version doesnot support E8000/E4000 models.) v1.40.9v2.0.1.0 Embedded CIMOM provider versionV10L70-0000 (for E2000)

Requires a network connection to the arrays that are managed through CIM.

Requires a network connection to the host where the CIMVAIL explorer is installed.

For E8000/E400 models, SMI-S provider v2.0.1.0 or later is required.

Interop namespace "root/eternus"

ETERNUS2000 100,200ETERNUSDX60, DX80and DX90


Environmental


Storage Vendors CIM object Manager (CIMOM,SMI-S 1.1 based): v1.40.2(This version doesnot support E8000/E4000 models.) v1.40.9v2.0.1.0. Minimum embedded CIMOM providerversion (SMI-S 1.2 based) V10L70-0000 (forE2000)and V10L20-0000 (for DX60/DX80/DX90).


Requires a network connection to the host where the CIMVAIL Explorer is installed.

Note: ETERNUS 2000 Model 100/200 and ETERNUS DX60/DX80/DX90 were testedwith embedded CIMOM.

Interop namespace “interop”

ETERNUSDX410, DX440,DX8100,DX8400,DX8700

Storage Vendors CIM object Manager (CIMOM,SMIS-S 1.1 based): v1.40.2(This version doesnot support E8000/E4000 models.) v1.40.9v2.0.1.0 Embedded CIMOM provider versionV10L70-0000 (for E2000)


Requires a network connection to the host where the CIMVAIL explorer is installed.

For Dx400/Dx8000 models, SMI-S provider v2.0.1.0 or later is required.

Interop namespace "root/eternus"

16


StorageDeviceVendor



Ancillary SW Notes

Generic SMI-S1.1, 1.2

Vendorsconforming toSMI-S 1.1, 1.2and inbandsupport byCommandCentral


Not Supported SMI-S Provider (CIMOM) from the vendor thatpassed CTP test

CommandCentral Storage discovers arrays that: 1) are compliant with and pass CTPconformance testing; 2) support profiles that are required by CommandCentralStorage.*

http://www.snia.org/ctp/conformingproviders#11provider (link to SMI-S CTPconformance test)

*Please refer to the product management for latest support as the SMI-S standard isan emerging standard and may need specific client testing due to varied profiles in thestandard and their interpretations by vendors

17


StorageDeviceVendor



Ancillary SW Notes

HDS

FreedomStorageStorageLightning 9900Series 9910,9960, 9970,9980

HiCommand Device Manager: 4.0, 4.1, 4.25.0, 5.1, 5.5, 5.6, 5.7, 5.8, 5.9, 6.0, 6.1.1, 6.2,6.3, 6.4HiCommand Tuning Manager: 4.x, 5.x,6.0, 6.1,6.2, 6.3, 6.4 (For Performance Statistics Only)

Refer to the Hitachi Freedom Storage Lightning 9900 Series Array Requirementssection of the CommandCentral Storage Hardware and Software Configuration Guidefor more information.

Also refer to Hitachi CE Firmware Field Upgrade Procedures (RN-SP001-00) foradditional information.

Japanese Model Equivalents:9000=SANRISE20009910=SANRISE22009960=SANRISE2800

*1 Discovery of COW pools/V-VOLs is not supported.*2 All arrays that participate in TrueCopy sessions should be configured for discoveryunder the same explorer process for complete pair discovery.

FreedomStorageThunder 9200

LUN BindingLUN Creation and DeletionLUN MaskingMulti LUN MaskingMulti LUN BindingDeep MappingSnapshots (ShadowCopy,QuickShadow *1) Replication(TrueCopy *2)

Refer to the Hitachi HiCommand Storage Array Requirements section of theCommandCentral Storage Hardware and Software Configuration Guide for moreinformation.

Japanese Model Equivalents:9200=SANRISE1100/1200


FreedomStorageThunder 9500Series 9530V9533V 9570V9580V 9585V




Refer to the Hitachi HiCommand Storage Array Requirements section of theCommandCentral Storage Hardware and Software Configuration Guide for moreinformation.

Japanese Model Equivalents:9530V=SANRISE9530V9533V=SANRISE9533V9570V=SANRISE9570V9970V=SANRISE9970V9980V=SANRISE9980V


Tagma AMS200 500 1000Tagma WMS100 AMS2100, 2300,2500

HiCommand Device Manager:4.2, 5.0, 5.1, 5.5, 5.6, 5.7, 5.8, 5.9, 6.0, 6.1.1,6.2, 6.3, 6.4HiCommand Tuning Manager: 4.x, 5.x, 6.0, 6.1,6.2, 6.3, 6.4 (For Performance Statistics Only)

For USP-V, HiCommand Device Manager 5.7 or later is required.CommandCentral 5.2 supports thin-provisioning for USP-V.HDvM 5.9 not supported for USP-VThe CommandCentral Management Server and the HiCommand Tuning Managerhost should be in the same timezone


TagmaUSP/SE9990100 600 1100NSC55 USP-V

LUN BindingLUN Creation and DeletionLUN MaskingMulti LUN MaskingMulti LUN BindingDeep MappingSnapshots (ShadowCopy,QuickShadow *1) Replication(TrueCopy *2)Thin Provisioning


For USP-V, HiCommand Device Manager 5.7 or later is required.HDvM 5.9 not supported for USP-VThe CommandCentral Management Server and the HiCommand Tuning Managerhost should be in the same timezone


18


StorageDeviceVendor



Ancillary SW Notes

HP

EVA 4x00,6x00, 8x00

Environmental (onlywith SSSU v6.0 andlater)

LUN Creation and DeletionLUN MaskingRSV Creation and DeletionDeep Mapping

SSSU for HP StorageWorks CommandViewEVA v4.0, v4.1, v5.0, v6.0, v7.0, v8.0, v9.0,v9.2.0 Command View EVA software v4.0 Command View EVA software v5.0 Command View EVA software v6.0 Command View EVA software v7.0 Command View EVA software v8.0 Command View EVA software v9.2.0 Command View EVA software v9.2.1

Requires a fibre connection between the Management Appliance and the arrays beingmanaged. Requires a network connectivity between the Management Appliance andthe host where the SSSU is installed.

EVA 3000,5000

SSSU for HP StorageWorks CommandViewEVA v4.0, v4.1, v5.0, v6.0, v7.0, v8.0,v9.0, v9.2.0

Command View EVA software v4.0 Command View EVA software v5.0 Command View EVA software v6.0 Command View EVA software v7.0 Command View EVA software v8.0 Command View EVA software v9.2.0 Command View EVA software v9.2.1

HP announced a mandatory factory modification for HP 5000 arrays, only the softwareand firmware versions listed here are supported.

Requires a fibre connection between the Management Appliance and the arrays beingmanaged.

Requires a network connectivity between the Management Appliance and the hostwhere the SSSU is installed.


xp 128, xp1024,xp12000,xp24000

Not Supported Deep Mapping CommandView XP AE 6.0 with HP CIMOM SMI-S Provider

Correlation of luns belonging to backend arrays is not supported for HP XP arraysdiscovered via SMIS.

XP 48 XP 128XP 512 XP1024 XP 10000XP 12000 XP24000

Environmental

LUN BindingLUN Creation and DeletionLUN MaskingMulti LUN BindingMulti LUN MaskingRSV Creation and Deletion*Deep MappingSnapshots

CommandView XP AE 1.0.0-01, 5.0, 5.7, 6.0

* Vendor issue for CV AE older than 5.0 : LUSE destruction fails to destroy underlyingsegments.For XP24000, CommandView XP AE 5.7 or later is required.No thin-provisioning support for XP 24000.

19


StorageDeviceVendor



Ancillary SW Notes

IBM

DS4100DS4300 (FASt-T 600) DS4400(FASt-T 700)DS4500 (FASt-T 900) DS4700DS4800

Environmental


Engenio SMIS Provider (SMI-S 1.1 basedCIMOM): v9.16.G0.17, v9.16.G0.34, v9.19.G0.17, v9.19.G0.19, v9.23.G0.00, v9.70.G0.02, v10.10.G0.04, v10.35.G0.00, v10.50.G0.04

Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL Explorer is installed.

DS6000 SeriesDS6800 (1750-511) DS8000Series DS8100(2107-921)DS8300 (2107-922)


LUN Binding LUN Creation andDeletion Multi LUN Binding MultiLUN Masking Deep Mapping

IBM SMI-S Provider (SMI-S 1.1 based CIMOM):v5.2.1.139, v5.3.0.x(SMI-S 1.2 based CIMOM):v5.3IBM DS OPEN API v5.4


Extent Pool/Rank/Array (Volume Space equivalent for IBM ESS) management notsupported.Download the SMI-S provider from here:http://www-947.ibm.com/systems/support/supportsite.wss/selectproduct?taskind=2&brandind=5000033&familyind=5329497&typeind=0&modelind=0&osind=0&psid=sr&continue.x=1

Minimum FW requirement for the arrays for support via SMI-S: - DS6000 - 5.0.6.235(LIC) /6.0.600.23 (bundle) - DS8000 - 5.1.0.309 (LIC) / 6.1.0.44 (bundle)v5.3.0.x supports both Embedded and proxy CIMOMs for DS8XXX arrays.

Performance monitoring requires IBM CIMOM version 5.3 and above(i.e SMIS version1.2).

DS8700(941) Monitoring notsupported IBM embedded CIMOM v5.5.0.6 Requires a network connection to the arrays that are managed through CIM.

DS8700 only supports Embedded CIMOM.

ESS (Shark)F20 800



LUN BindingLUN CreationMulti LUN BindingMulti LUN MaskingDeep Mapping

IBM SMI-S Provider (SMI-S 1.1 based CIMOM):v5.2.1.139(SMI-S 1.2 based CIMOM):v5.3


Volume Deletion and Volume SpaceManagement is not supported.Download the SMI-S provider from here:http://www-947.ibm.com/systems/support/supportsite.wss/selectproduct?taskind=2&brandind=5000033&familyind=5329497&typeind=0&modelind=0&osind=0&psid=sr&continue.x=1

Minimum FW requirement for the arrays for support via SMI-S: - ESS F20 - 2.3.3.89 -ESS 800 -2.4.3.56

ESS (Shark)F10 Environmental

LUN CreationLUN MaskingMulti LUN MaskingRSV Creation and DeletionDeep Mapping

Enterprise Storage Server CLI versions:2.2.0.0, 2.3.1.1, 2.3.1.22.4.2.33

Network connectivity is required between the storage array(s) and the host where theESS CLI is installed.

JRE 1.3.1 or later installed on the host where the ESS CLI is installed.

Windows platforms must be rebooted after installing the ESS CLI.

N series(RebrandedNetapp) N3000series N5000series

EnvironmentalPerformance (Windowsand Solaris bas

LUN Masking Deep Mapping vFilers SnapShots Snapmirrors FlexVols FlexClones

ONTAP 6.5.x 7.0.x 7.1.x 7.2.x Thin provisioning not supported (7.x)

20


StorageDeviceVendor



Ancillary SW Notes

SAN VolumeController(SVC)2145


Deep Mapping Correlation withbackend volumes

IBM SVC SMI-S 1.0.3 Provider:SVC 4.1.1SVC 4.2IBM SVC SMI-S 1.2 Provider:SVC 4.2.1SVC 4.3SVC 4.3.1SVC 5.1Embedded SMI-S 5.1.0.6

Requires a network connection to the arrays(SVC) that are managed through CIMagent (SMI-S Provider).Requires a network connection to the host where the CIMVAIL Explorer is installed.

The CIM Agent for SVC runs on the SVC master console.

The backend arrays, attached to the IBM SVC, should also be configured separatelyin CommandCentral Storage in order to have the backend lun correlation support.

Arrays qualified as backend arrays for SVC: HDS 9900, EMC Clarion, IBM DS8000,IBM DS4x00.

Performance monitoring requires firmware version 4.2.1 and above.(i.e SMIS version1.2).

XIV A14-2810,XIV A14-2812

Solaris 9,Solaris10,Windows2000,Windows2003,Windows2008

Thin Provisioning IBM XCLI V2.4.1

XCLI can be downloaded from the IBM XIV site:http://www-947.ibm.com/support/entry/portal/Overview/Hardware/System_Storage/Disk_systems/Enterprise_Storage_Servers/XIV_Storage_System_%282810,_2812%29

NECNEC Storageseries iStorageseries


Environmental Deep Mapping NEC SMIS Provider v1.1Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL explorer is installed.Contact NEC support for the access to the SMI-S provider software.

NetApp

F87 FAS200Series, FAS800Series, FAS900Series,FAS3000Series,FAS6000Series,NearStoreSeries, V


EnvironmentalPerformance (Windowsand Solaris bas

LUN MaskingDeep MappingvFilersSnapShotsSnapmirrorsFlexVolsFlexClonesDedup Attributes Discovery

ONTAP 6.5.x 7.0.x 7.1.x 7.2.x7.3.x

Thin provisioning not supported.iSCSI discovery is supported from both Management Server platforms, iSCSI storagecorrelation is supported on Windows only and requires use of Microsoft iSCSISoftware Initiator Version 2.02 or later on Windows 2003 OS. For Windows 2008native initiator is required.

Supports the correlation of the physical disks of NetApp V-Series storage systems andtheir backend array volumes (LUNs).

All FAS models compatible with ONTAP 7.3.x version are supported.Dedup attributes are discovered if the array supports the feature and appropriatelicenses are installed

SUN

D173, D178,D220, D280,6540(FLEXLINE380), 6130,6140, 6180,6580, 6780

Environmental Performance


Engenio SMIS Provider (SMI-S 1.1 basedCIMOM): v9.16.G0.17, v9.16.G0.34, v9.19.G0.17, v9.19.G0.19, v9.23.G0.00, v10.10.G0.04, v10.35.G0.00, v10.50.G0.04

Based on LSI/Engenio information of comparative models.

Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL explorer is installed.Needs SMI-S

Provider version 9.23.G0.00 or later.

Download the Engenio SMI-S provider from here:http://www.lsi.com/storage_home/products_home/external_raid/management_software/smis_provider/index.html

Note: No management operation is supported.

SunStorageTek9910, 9960,9970, 9980


HiCommand Device Manager: 6.0Refer to the Hitachi Freedom Storage Lightning 9900 Series Array Requirementssection of the CommandCentral Storage Hardware and Software Configuration Guidefor more information.

SunStorageTek9985, 9990,9990 RoHS,9985V, 9990V

Refer to the Hitachi HiCommand Storage Array Requirements section of theCommandCentral Storage Hardware and Software Configuration Guide for moreinformation.No thin provisioning supported.

22

hba

CommandCentral Storage - HBAs

HBA Vendor Model OS Drivers Features Supported Notes

Brocade

Linux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bit

V 2.1.0.0V 1.1.0.8V 1.0.0.02

415, 425, 815, 825 Solaris 10V 2.1.0.0V 1.1.0.7V 1.0.0.02

Note: HBA monitoring and HBA-port status monitoring is not supported.

Suse Linux ES 9 32-bit,Suse Linux ES 9 64-bit,Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bit

V 2.1.0.0V 1.1.0.8V 1.0.0.02

Windows 2003-32bit,Windows 2003-64bit,Windows 2008 32-bit,Windows 2008 64-bit

V 2.1.0.0V 1.1.0.8V 1.0.0.04V 2.1.0.2V 2.2.0.2

23



Emulex

Linux Red Hat AS 3.0 32-bit 7.1.14, 7.3.6

Linux Red Hat AS 4.0 32-bit 8.0.6.27



8.2.0.63, 8.2.0.22, 8.2.0.29

LP10000, LP10000DC,LPe11002, LPe11000,LPe11000, LPe1150,LP1150-E, LPe1150-E,LP11002, LP11000

Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bit 8.2.0.63


Windows 2000,Windows2003- 32bit

5-1.10a4, 1.20a3 5-2.21a7, 5-2.22a8,5-2.23a6 2.30a2, 2.40a2, 2.41a1,2.42a0 (SCSIport) 5.10a10, 5.31a0(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9

Windows 2003-32bit

5-2.41a1, 2.42a0 (SCSIport)5.10a10, 5.31a0 (STORport)1.11a3,1.20a3,1.20a7,1.30a6,1.30a9, 2.01a4, 2.30.016

Windows 2003-64bit6-1.10a4, 2.30.016, 1.20a3(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9

Windows 2008 32-bit,Windows 2008 64-bit STORport 2.01a4, 2.30.016

LP10000DC, LP10000,LP9402DC

Solaris 8,Solaris9,Solaris10 6.01f(Solaris 8,9 only), 6.21g, 6.30g




LP1050, LP1050DCLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bit

8.2.0.22, 8.2.0.29, 8.2.0.63



Windows 2003-64bit6-1.10a4, 1.20a3 (STORport) 1.11a3, 1.20a3, 1.20a7, 1.30a6, 1.30a9, 2.01a4, 2.30.016


LP11000, LPe11002,LPe11000, LP11002,LP9002C, LP9002S,LP9002DC, LP9002L

Solaris 8,9,10 6.10g, 6.11c, 6.21g, 6.30g


8.2.0.63

Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bit 8.2.0.29, 8.2.0.63

24


HBA Vendor Model OS Drivers Features Supported NotesLP11002, LP11000,LP1150, LPe11002,LPe11000, LPe1150,LP1005DC-CM2,LP10000ExDC,LP1050Ex, LP10000D


Windows 2003 32-bit,Windows 2003 64-bit 2.00a12, 2.10a7, 2.20.006, 2.30.016

Windows 2008 32-bit,Windows 2008 64-bit 2.10a7, 2.20.006, 2.30.016

Linux Red Hat AS 3.0 32bit 7.1.14, 7.3.6



Linux Red Hat AS 5.0 32-bit


8.2.0.22, 8.2.0.29 (LP9000 only),8.2.0.63

Linux Red Hat AS 5.0 64-bit

LP8000, LP9000 Solaris 8,Solaris9,Solaris10

4.20K, 5.0i, 5.01e, 5.01e-1, 5.02b,5.03, 6.01c*, 6.01f(Solaris 8,9 only) ,6.02f, g, 6.10g, 6.11c, 6.21g, 6.30g

Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bit 8.2.0.29 (LP9000 only), 8.2.0.63


Windows 2000 for HPsystems

5-4.82a95-4.82a14 (9002L only)

Windows 2000,Windows2003-32bit

5-1.10a4, 1.20a3,5-2.12a1, 5-2.13a4,2.20a12-2, 2.21a8, 2.22a8, 2.23a6,2.30a2, 2.40a2,2.41a1,2.42a0,5-4.53.a4,5-4.53.a5,5-4.53.a7(CompaqOnly) 5-4.82a4(SCSIport)5.10a10,5.31a0(STORport)1.11a3,1.20a3,1.20a7,1.30a6,1.30a9, 2.00a12 and 2.30.016(Windows 20

Windows 2003 64-bit

5.00a10/a11 (Miniport) 6-1.10a4, 1.20a3 6-2.21a7, 6-2.21a8, 6-2.22a8 (STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.00a12, 2.30.016

Windows 2008 32-bit,Windows 2008 64-bit

STORport 2.01a4 (LP9000 only),2.30.016




25



LP8000DCLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bit

8.2.0.22, 8.2.0.29

CommandCentral automatically discovers these HBAs and their physical connections to the SAN, as wellas model, driver, firmware, OS version and OS handles.

Please check the Emulex website for the latest firmware.The 2.12A1 device driver supporting CT Passthru is limited in the size of a McDATA Zone they cansupport (about 32 to 64 ports).For 4.53.Ax, CT Passthru will not work with any driver in this family.Emulex (Windows 2000) drivers support FDMI from versions 5-5.01 a0-01 (port driver) and 5-2.20a12-2(miniport drivers) and onwards. Please refer to the Emulex website for information on configuring FDMIand for the Hardware Compatibility List for FDMI.

* With Solaris driver version 6.01c and Linux driver version 2.01g, CT Passthru may fail with the defaultsettings for the HBA.This problem can be worked around by setting the "lpfc_fdmi_on" parameter to 1 in the lpfc.conf file. Thisissue will be fixed in a later version of the driver.


Solaris 8,Solaris9,Solaris10

6.01f(Solaris 8,9 only) , 6.02f, g,6.10g, 6.11c, 6.21g, 6.30g



5-1.10a4, 1.20a3 5-2.12a1, 5-2.13a42.20a12-2, 2.21a8, 2.22a8, 2.23a6,2.30a2, 2.40a2, 2.41a1, 2.42a0 5-4.53.a4, 5-4.53.a5 5-4.53.a7(Compaq Only) 5-4.82a4 (SCSIport)5.10a10, 5.31a0 (STORport) 1.11a3,1.20a3, 1.20a7, 1.30a6, 1.30a9,2.00a12(Windows 2003

FDMI Supported only with newerversion of drivers.

Windows 2003 64-bit 2.00a12

LP8000S Solaris 8,Solaris9,Solaris10

4.20K, 5.0i, 5.01e, 5.01e-1, 5.02b,5.03, 6.01c*, 6.01f(Solaris 8,9 only) ,6.02f, g, 6.10g, 6.11c, 6.21g, 6.30g

LP850 Windows 2003 32-bit,Windows 2003 64-bit 2.00a12

LP9000 2.01a4, 2.10a7, 2.20.006


LP9002C, LP9002S,LP9002DC, LP9002L Solaris 8,9 6.01f




LP9402/DC, LP9402Linux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bit

8.2.0.63, 8.2.0.29, 8.2.0.22


5.01e, 5.01e-1, 5.02b, 5.03 6.01c*,6.01f(Solaris 8,9 only) , 6.02f, g,6.10g, 6.11c


5-1.10a4, 1.20a3 2.23a6, 2.30a2, 2.40a2, 2.41a1,2.42a0 5-4.82a4 (SCSIport) 5.10a10, 5.31a0 (STORport) 1.11a3, 1.20a3, 1.20a7, 1.30a6, 1.30a9, 2.01a4, 2.30.016

Windows 2003-64bit6-1.10a4, 1.20a3 (STORport) 1.11a3, 1.20a3, 1.20a7, 1.30a6, 1.30a9, 2.01a4, 2.30.016

26


HBA Vendor Model OS Drivers Features Supported NotesWindows 2008 32-bit,Windows 2008 64-bit STORport 2.01a4, 2.30.016



LP952L, LP982 Linux Red Hat AS 4.0 64-bit 8.0.16.40


8.2.0.22, 8.2.0.29


5-1.10a4, 1.20a3 5-2.13a4 2.20a12-2, 2.21a8, 2.22a8, 2.23a6, 2.30a2, 2.40a2, 2.41a1, 2.42a0 5-4.82a4 (SCSIport) 5.10a10, 5.31a0 (STORport) 1.11a3, 1.20a3, 1.20a7, 1.30a6, 1.30a9, 2.01a4

Windows 2003-64bit

6-1.10a4, 1.20a3 6-2.21a7, 6-2.21a8, 6-2.22a8 (STORport) 1.11a3, 1.20a3, 1.20a7, 1.30a6, 1.30a9, 2.01a4




LP9802DC, LP9802Linux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bit

8.2.0.22, 8.2.0.29


5.0i, 5.01e, 5.01e-1, 5.02b, 5.03,6.01c*, 6.01f(Solaris 8,9 only) , 6.02f,g, 6.10g, 6.11c, 6.21g, 6.30g

Windows 2003-64bit

6-1.10a4, 1.20a3 6-2.21a7, 6-2.21a8, 6-2.22a8 (STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.01a4, 2.30.016


Windows 2003 32-bit,Windows 2003 64-bit 2.30.016

LPe11002, LPe11000,LPe11000, LPe1150,LP1150-E, LPe1150-E,LP11002, LP11000,LP1150,LP1005DCCM2, L

Windows 2008 32-bit

Windows 2008 64-bit (STORport) 2.01a4, 2.30.016

Linux Red Hat AS 4.0 64-bit 8.0.16.40 (LPe12000 only)


8.2.0.22, 8.2.0.29, 8.2.0.63

LPe12000, LPe12002 Solaris 8,Solaris9,Solaris10 6.21g, 6.30g


27


HBA Vendor Model OS Drivers Features Supported NotesSuse Linux ES 9 32-bit,Suse Linux ES 9 64-bit 8.0.16.44, 8.0.16.47


8.2.0.22, 8.2.0.29, 8.2.0.63

LPe1250 Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bit 8.2.0.29, 8.2.0.63



STORport 2.01a4, 2.10a7, 2.20.006,2.30.016

LP1050, LP1050DC Windows 2000,Windows2003- 32bit

5-1.10a4, 1.20a3 5-2.21a7, 5-2.22a8, 5-2.23a6 2.30a2, 2.30.016, 2.40a2, 2.41a1,2.42a0 (SCSIport) 5.10a10, 5.31a0 (STORport) 1.11a3, 1.20a3, 1.20a7, 1.30a6, 1.30a9, 2.01a4, 2.32.002

LP952L, LP982 Windows 2008 32-bit,Windows 2008 64-bit STORport 2.01a4, 2.32.002

CommandCentral automatically discovers these HBAs and their physical connections to the SAN, as wellas model, driver, firmware, OS version and OS handles.

Please check the Emulex website for the latest firmware.The 2.12A1 device driver supporting CT Passthru is limited in the size of a McDATA Zone they cansupport (about 32 to 64 ports).For 4.53.Ax, CT Passthru will not work with any driver in this family.Emulex (Windows 2000) drivers support FDMI from versions 5-5.01 a0-01 (port driver) and 5-2.20a12-2(miniport drivers) and onwards. Please refer to the Emulex website for information on configuring FDMIand for the Hardware Compatibility List for FDMI.

* With Solaris driver version 6.01c and Linux driver version 2.01g, CT Passthru may fail with the defaultsettings for the HBA.This problem can be worked around by setting the "lpfc_fdmi_on" parameter to 1 in the lpfc.conf file. Thisissue will be fixed in a later version of the driver.


LP9802DC, LP9802 Windows 2000,Windows2003- 32bit

5-1.10a4, 1.20a3 5-2.13a4 2.20a12-2, 2.21a8, 2.22a8, 2.23a6, 2.30a2,2.40a2, 2.41a1, 2.42a0 5-4.82a4(SCSIport) 5.10a10, 5.31a0(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.01a4,2.30.016(Windows 2003 32-bit only),2.32.002

LPe12000, LPe12002


STORport 2.01a4, 2.20.006,2.30.016, 2.32.002

Generic

HBAs are discovered if connected to switches with their WWNs, but have no host association. Anenclosure representing a host can be built around these HBAs to create a manually-configured hostassociation.

DAS support for IDE on Solaris and WindowsSMI-S 1.1 support is added for CTP complaint vendors (Does not support Linux SMI-S).

AIX, HP-UX, Linux do not require HBA API installation but Solaris and Windows require it.IDE disk discovery on Solaris, Linux and Windows.


28



HP

HP-UX 11.0b 11.00.10 (with HP patchPHSS_26798)

A6795AA5158A HP-UX 11i v1

11.11.1911.11.09 (with HP patchPHSS_26799)

HP-UX 11i v2

11.23.090911.23.080911.23.080311.23.070911.23.01

HP-UX 11i v3 (PA-RISC &IA)

11.31.1003 (A6795A only)11.31.0909 (A6795A only)11.31.0811 (A6795A only)

CommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver, firmware, OS version and OS handles.

Max CT size limitation is 64 ports on a McData switch.RSCN changes are only noted after IOSCAN issued (next SAL exploration).* The 11.11.03 driver does not support in-band fabric discovery. Discovery of the fabric will need to beestablished out of band.


AB379AAB378AA6826A

HP-UX 11i v1 11.11.1611.11.03* (A6826A only)

AB379AAB378AA6826AAD194A

HP-UX 11i v2

11.23.100311.23.090911.23.090311.23.080311.23.08.02

HP-UX 11i v3 (PA-RISC &IA)

11.31.100311.31.0909 (A6826A only)11.31.0809 (A6826A only)

IBM

AIX 5.2 devices.pci.df1000fa.rte 5.2.0.75

5716 AIX 5.3devices.pci.df1000fa.rte 5.3.0.10,devices.pci.df1000fa.rte 5.3.0.30,devices.pci.df1000fa.rte.5.3.9.0

AIX 6.1 devices.pci.df1000fa.rte 6.1.2.0

5758 AIX 5.3devices.pci.df1000fd.rte 5.3.0.60,devices.pci.df1000fd.rte 5.3.8.0,devices.pci.df1000fd.rte.5.3.9.0

AIX 6.1 devices.pci.df1000fd.rte 6.1.2.0

5759 AIX 5.3devices.pci.df1000fd.rte 5.3.0.60,devices.pci.df1000fd.rte 5.3.8.0,devices.pci.df1000fd.rte.5.3.9.0

5773 devices.pciex.df1000fe.rte 5.3.9.0

AIX 6.1 devices.pciex.df1000fe 6.1.2.0

CommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver, firmware, OS version and OS handles.


5774 AIX 5.3 devices.pciex.df1000fe.rte 5.3.9.0

AIX 6.1 devices.pciex.df1000fe 6.1.2.0

6227 devices.pci.df1000f7.rte 5.2.0.75

6228 AIX 5.2 devices.pci.df1000f9.rte 5.2.0.75

devices.pci.df1080f9.rte 5.2.0.75

6239 AIX 5.3devices.pci.df1080f9.rte 5.3.0.10,devices.pci.df1080f9.rte 5.3.0.30,devices.pci.df1080f9.rte.5.3.9.0

AIX 6.1 devices.pci.df1080f9.rte 6.1.2.0

29



JNI(AMCC)

FCI-1063, FC64-1063

2.5.9 (HDS)2.5.9.03 (Compaq)2.5.9.18, 2.5.9.212.6.9, 2.6.10, 2.6.11, 2.6.12, 2.6.13

CommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver,firmware, OS version and OS handles.

The 2.5.x drivers do not support CT Passthru.For 2.6.9, there are circumstances where this driver may cause a system panic when handling CTPassthru requests.


FCE-6410, FCE2-6412,FCE-1063, FCE2-1063 Solaris

4.1, 4.1.1, 4.1.1.14.13 (Solaris 9)4.15 (Solaris 8)4.16

FCE-6460, FCE-14735.1.15.2.15.3

CommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver,firmware, OS version and OS handles.

There is a 2K CT Packet limitation with the 4.1.x and 5.1.1 drivers which could limit the amount of zoninginformation discovered.The 4.1.x drivers are not compatible with Brocade Silkworm 12000 and 3900 running firmware versionsv4.1.0 and v4.1.1.

CommandCentral Storage can perform in-band discovery of JNI dual HBA ports only when the installedSNIA library version is v2.0.03717-16 or higher


FCX-6562, FCX2-6562 5.2.1, 5.3

30



QLogic

Linux Red Hat AS 3.0 32-bit 7.03.00

QLA 2200F QLA 2202F Linux Red Hat AS 4.0 32-bit 8.01.06, 8.01.07-fo, 8.01.04-d7

Solaris3.16, 3.26,4.03, 4.07, 4.09,4.13, 4.13.01, 4.17


8.1.38.1.5.10, 8.1.5.12, 8.1.5.15, 8.1.5.208.1.5.62, 8.1.5.63

QLA 2202FS Solaris Sbus3.16, 3.26,4.03, 4.07, 4.09,4.13, 4.13.01, 4.17

Linux Red Hat AS 3.0 32bit 7.00.03 7.03.00, 7.07.05

Linux Red Hat AS 4.0 32-bit 8.01.06, 8.01.07-fo, 8.01.04-d7

Linux Red Hat AS 4.0 64-bit,Linux Red Hat AS 5.032-bit,Linux Red Hat AS5.0 64-bit

8.02.14

QLA 2300, QLA 2310,QLA 2340, QLA 2342,QLA 2344

Solaris 3.16, 3.26, 4.03, 4.07, 4.09, 4.13,4.13.01, 4.17 5.01*, 5.03

Suse Linux ES 9 32-bit,Suse Linux ES 9 64-bit,Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bit

8.02.14


8.1.3 8.1.5.10, 8.1.5.12, 8.1.5.208.1.5.62, 8.1.5.63, 8.2.3.63 9.0.0.12,9.0.0.13 9.0.1.10, 9.0.1.12, 9.0.2.16,9.0.2.17 9.1.0.10, 9.1.2.11, 9.1.4.10(STORport) 9.1.2.14, 9.1.2.16,9.1.2.19, 9.1.4.15, 9.1.7.16(Windows2003 -32 bit QLA 2340 only), 9.1.7.1

Windows 2003-64bit 8.2.3.63 9.1.2.16, 9.1.7.16(QLA 2340only), 9.1.7.18


Storport Miniport Driver 9.1.7.16,9.1.7.18

QLogic drivers support FDMI fromversion 4.13 (Solaris) onwards. Pleaserefer to the QLogic website forinformation on configuring FDMI and forthe Hardware Compatibility list forFDMI.Linux:StorageExplorer:discovering bothsg and sd device for same lun withdifferent attributes, requires a SAH HF2 or above

CommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver, firmware,OS version and OS handles.

For 3.16, 3.26, 4.03, 4.07, 4.09, there are circumstances where this driver may cause a system panicwhen handling CT Passthru requests.For the 8.1.3 driver, there is a 2K CT packet limitation which could limit the amount of zoning informationdiscovered.For the 8.2.3.63 driver, there is a 24K CT packet limitation which could limit the amount of zoninginformation discovered.

The 4.13 and 4.13.01 Solaris drivers are not compatible with Brocade Silkworm 12000 and 3900 runningfirmware versions v4.1.0 and v4.1.1.*5.01 driver for Solaris does not support the QLA2300.


Linux Red Hat AS 3.0 32-bit 7.07.05

Linux Red Hat AS 4.0 32-bit 8.01.06, 8.01.07-fo, 8.01.04-d7

Linux Red Hat AS 4.0 64-bit,Linux Red Hat AS 5.032-bit,Linux Red Hat AS5.0 64-bit

8.03.00.09 (RHEL 5 only), 8.02.14

QLA24XX QLE24XX Solaris 5.01, 5.03

31


HBA Vendor Model OS Drivers Features Supported NotesSuse Linux ES 9 32-bit,Suse Linux ES 9 64-bit,Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bit

8.03.00.08(Suse 10 only), 8.02.14


9.1.0.10, 9.1.2.11, 9.1.4.10(STORport) 9.1.2.14, 9.1.2.16,9.1.2.19, 9.1.4.15, 9.1.7.18,9.1.8.25(Windows 2003 only)

Windows 2003-64bit 9.1.2.16, 9.1.7.18, 9.1.8.25


Storport Miniport Driver 9.1.7.16,9.1.7.18, 9.1.8.25

QLE 2362

Windows 2003 32-bit,Windows 2003 64-bit,Windows 2008 32-bit,Windows 2008 64-bit

9.1.7.18

Solaris v5.05 (QLE 2560, QLE 2562 only)

QLE 2560, QLE 2562,QLE 2462

Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bit,Suse Linux ES 9 64-bit,Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 5.064-bit

8.03.00.09(RHEL 5 only)8.03.00.08 (Suse 10 only)8.02.23 (QLE 2560, QLE 2562 only)


9.1.7.16, 9.1.8.17 (QLE 2462, QLE2562 only), 9.1.18.16, 9.1.7.18,9.1.8.25

Sun

SG-XPCI1FC-EM2 , SunSG-XPCI2FC-EM2 Solaris 10 Driver patch 141876-06 Solaris 10 update 6 is required.

SG-XPCI1FC-QF2, SG-XPCI2FC-QF2, SG-XPCI1FC-QF4, SG-XPCI2FC-QF4

Driver Patch 142084-03DiscoveryMulti-Zone Set ZoningPort Enable/Disable

SUNWsan v4.4.1 requires a patch from Sun to fix Bug ID #5095557: Patch ID #113767-07 (Solaris 8) or114478-06 (Solaris 9).

# Solaris 10 equivalence of 4.4.12 is kernel level Generic_118833-36SUN driver patch 125166-13 has been replaced by SUN with patch rev 139606-02SUN Leadville driver Patch 120223 patch family has been replaced by SUN with patch 139608-03

SUN Leadville driver 4.4.9 is not supported. Installation of CommandCentral MH on a system having thisdriver version can cause undesired results.

*Solaris 10 supportSunOS 5.10: Sun Fibre Channel Device Drivers Patch 119130-09 or later must be installed on the Solaris10 for Leadville to work properly.

Note: SunOS 5.10 Generic_118822-19 kernel patch level includes the 119130-09 patch.

HBA monitoring and HBA-port status monitoring is not supported.

StorEdge X 6767 A orSG-XPCI1FC-QF2 X6768 A or SG-XPCI1FC-QF2, SG-XPCI2FC-Q

Solaris 8,9,10* 4.3.x, 4.4.6, 4.4.8, 4.4.11, 4.4.15

32

mis

CommandCentral Storage - Miscellaneous Devices

Device Type Vendor Model Firmware Monitoring Alerting Notes

DWDMInRange Spectrum 2000 Supported

ADVA FST 2000

iSCSI Router Cisco 5420 Not Supported

Multi-Protocol Router Brocade AP7420 7.3.0c, 7.4.x Not Supported

Tape/ Tape Array

L-Series(L20/40/80/180/700e/5500)

STK Powderhorn (9310)

Symantec does not specifically certifyLibrary firmware for ACSLS controllerlibraries. Symantec certifies usage ofthese ACSLS controlled STK librariesvia the ACSLS server only. ACSLSshould be version 7.0 or greater.

Not Supported

CommandCentral Storage discovers tape devices which are attached to a SAN and hence visible to themanaged host through a supported HBA/driver.A SCSI tape library may be attached to the SAN through an FC-SCSI bridge for this purpose.For list of supported HBAs/drivers refer to the CommandCentral HBAs section of this document.For other tape enclosures, you can identify or create enclosures for tape devices through the enclosurewizard.

For a complete list of supported devices please refer to the VERITAS NetBackup DataCenter v4.5 orEnterprise Server v5.0/v5.1 Device Compatibility List available on the Symantec Support website (see linkon page 1).

Timberwolf(9710/9714/9730/9740)

33

sof

CommandCentral Storage - Software

Vendor Application Software Version Supported OS Application Correlation Cluster Support Monitoring Alerting

EMC Powerpath

3.0.6 Windows 2003-32bit, Solaris 9, Solaris 8, Linux (AS/ES) 3.0, Windows 2000 Supported

4.2 Solaris 9, Solaris 8, Linux (AS/ES) 3.0 Supported

4.3 Solaris 9, Linux (AS/ES) 3.0, Windows 2003-32bit, Windows 2003-64bit, Windows 2000, Solaris 8 Supported

4.3.1 Linux (AS/ES) 3.0, Windows 2003-64bit, Windows 2000, Solaris 8, Windows 2003-32bit, Solaris 9 Supported

4.4 Windows 2003-32bit, Linux (AS/ES) 4.0 64-bit, Solaris 8, Linux (AS/ES) 5.0 32-bit, Windows 2000, Linux (AS/ES) 4.032-bit, Solaris 10, Linux (AS/ES) 5.0 64-bit, Windows 2003-64bit, Solaris 9 Supported

4.5 Windows 2000, Linux (AS/ES) 4.0 64-bit, Solaris 8, Linux (AS/ES) 4.0 32-bit, Solaris 10, Windows 2003-64bit, Solaris9, Windows 2003-32bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 5.0 64-bit Supported

4.6 Windows 2003-64bit, Windows 2000, Windows 2003-32bit, Windows 2003-64bit Supported

5.0 Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 4.0 32-bit Supported

5.1 Linux Red Hat ES 4.0 32-bit, Linux Red Hat ES 4.0 64-bit

5.2 Windows 2008 64-bit, Windows 2008 32-bit, Solaris 10 Supported

5.3 Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit Supported

5.3.1.2 Linux Red Hat ES 4.0 32-bit, Linux Red Hat ES 4.0 64-bit

N/A Supported

HP

HP HFS HP-UX 11i v1, HP-UX 11i v2, HP-UX 11i v3 (PA-RISC & IA) Supported Supported

HP LVM HP-UX 11i v2, HP-UX 11i v1 Supported Supported

HP Secure Path 4.0C Windows 2000, Windows 2003-32bit Not Supported N/A Not Supported

IBM

AIX JFS AIX 5.2, AIX 6.1, AIX 5.3 Supported N/A Supported

DB2(EE, EEE, ESE)

7.2 Solaris 9, AIX 5.2, Solaris 8, Solaris 10, AIX 5.3 Supported

8.1Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 32-bit, Suse Linux ES10 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, AIX 5.3, Linux Red Hat AS 3.0 32-bit, Solaris 8, Solaris 9, AIX 6.1, Solaris 10, AIX 5.2

Supported

8.2AIX 5.3, Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux Red Hat AS 3.0 32-bit,Linux (AS/ES) 4.0 32-bit, Solaris 10, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, Solaris9, Suse Linux ES 10 64-bit, AIX 5.2, Solaris 8, AIX 6.1

Supported

9.5Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux Red Hat AS 3.0 32-bit, Linux(AS/ES) 4.0 32-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, Suse Linux ES 10 64-bit, Solaris 9, Solaris 10, AIX 5.3, AIX 6.1

Supported

9.7Solaris 10, AIX 6.1, Linux (AS/ES) 5.0 64-bit, AIX 5.3, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES10 32-bit, Suse Linux ES 10 64-bit, Linux (AS/ES) 4.0 32-bit, Linux Red Hat AS 3.0 32-bit, Linux (AS/ES) 5.0 32-bit,Solaris 9, Linux (AS/ES) 4.0 64-bit

Supported

Supported Supported

AIX LVM AIX 5.3, AIX 5.2, AIX 6.1 Supported Supported Not Supported

AIX JFS2 AIX 5.2, AIX 5.3, AIX 6.1 Supported N/A Supported

34



Microsoft

NTFS Windows 2000, Windows 2008 64-bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2003-32bit Supported N/A Supported

LDM Windows 2008 32-bit, Windows 2003-64bit, Windows 2003-32bit, Windows 2000, Windows 2008 64-bit Supported N/A Not Supported

Cluster Server

2000 Windows 2000 Supported

2003 Windows 2008 64-bit, Windows 2003-32bit, Windows 2008 32-bit, Windows 2003-64bit Supported

2008 Windows 2008 64-bit, Windows 2008 32-bit Supported

N/A Supported

Exchange

2000 Windows 2000 Supported

2003 Windows 2000, Windows 2003-32bit Supported

2007 Windows 2003-64bit, Windows 2008 64-bit Supported

Supported Supported

SQL Server

2000 Windows 2003-32bit, Windows 2000, Windows 2003-64bit Supported

2005 Windows 2000, Windows 2008 64-bit, Windows 2003-32bit, Windows 2003-64bit, Windows 2008 32-bit Supported

2008 Windows 2003-32bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2008 64-bit Supported

Supported Supported

MPIO Windows 2003-32bit N/A N/A N/A

HBAAPI Windows 2003 32-Bit SP2+, Windows 2008 32-bit, Windows 2000 SP4+, Windows 2003 64-Bit SP2+, Windows 200864-bit N/A N/A N/A

Oracle

OPS 8i HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), Solaris 9, AIX 5.2, Solaris 8, AIX 5.3, HP-UX 11i v2, AIX 6.1 Supported Supported Supported

RAC

10g

HP-UX 11i v3 (PA-RISC & IA), Suse Linux ES 10 32-bit, Linux Red Hat AS 3.0 32-bit, AIX 5.2, Solaris 9, HP-UX 11iv2, Solaris 10, HP-UX 11i v1, Suse Linux ES 10 64-bit, Linux Red Hat AS 4.0 64-bit, AIX 5.3, Solaris 8, Linux Red HatAS 4.0 32-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 5.0 64-bit, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bit

Supported

11gLinux Red Hat AS 4.0 32-bit, HP-UX 11i v1, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 5.0 64-bit, Solaris 9, SuseLinux ES 9 32-bit, Solaris 8, Suse Linux ES 9 64-bit, AIX 5.3, HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat AS 3.0 32-bit, AIX 5.2, HP-UX 11i v2, Solaris 10, Suse Linux ES 10 64-bit, Linux Red Hat AS 4.0 64-bit, Suse Linux ES 10 32-bit

Supported

11g R2

Solaris 10, HP-UX 11i v2, AIX 5.2, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit, Solaris 8, Solaris 9, HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3, Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS 5.0 32-bit, LinuxRed Hat AS 5.0 64-bit, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 64-bit, Suse Linux ES 1032-bit

Supported

9i

Suse Linux ES 10 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, Linux Red Hat AS5.0 64-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit, AIX 5.3, HP-UX 11i v3 (PA-RISC & IA), HP-UX11i v1, Solaris 9, Solaris 8, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 3.0 32-bit, AIX 5.2, HP-UX 11i v2, Solaris10

Supported

Supported Supported

Oracle DB

10g

AIX 5.3, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS 3.0 32-bit, Suse Linux ES 9 32-bit, AIX 5.2, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v2, HP-UX 11i v1, Solaris 10, Solaris 9, Solaris 8, Suse LinuxES 9 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, AIX 6.1, Linux Red Hat AS 5.0 32-bit, Linux Red HatAS 5.0 64-bit

Supported

11gSuse Linux ES 10 64-bit, Linux Red Hat AS 4.0 32-bit, Suse Linux ES 10 32-bit, Solaris 8, Solaris 9, Solaris 10, HP-UX 11i v2, Linux Red Hat AS 3.0 32-bit, AIX 6.1, HP-UX 11i v1, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 5.0 64-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit

Supported

11g R2Solaris 9, Solaris 10, HP-UX 11i v2, AIX 6.1, HP-UX 11i v1, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit,Linux Red Hat AS 5.0 64-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 64-bit, Linux Red Hat AS 4.0 32-bit, LinuxRed Hat AS 5.0 32-bit, Solaris 8, Suse Linux ES 10 32-bit, Suse Linux ES 9 32-bit

Supported

8iSolaris 9, HP-UX 11i v2, AIX 5.2, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 5.0 64-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, Suse Linux ES 9 32-bit, Linux Red HatAS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit, AIX 5.3, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Solaris 8

Supported

9i

Solaris 9, HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3, Suse Linux ES 10 32-bit, Linux Red Hat AS 5.0 32-bit, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 64-bit, AIX 6.1, Solaris 8, Solaris 10, HP-UX 11iv2, AIX 5.2, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS5.0 64-bit

Supported

Supported Supported

ASM

10g Solaris 8, Solaris 9, HP-UX 11i v2, Solaris 10, AIX 5.2, HP-UX 11i v1, AIX 5.3, AIX 6.1, Linux Red Hat AS 5.0 64-bit,Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 64-bit Supported

11g HP-UX 11i v2, HP-UX 11i v1, Linux Red Hat AS 5.0 64-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit,AIX 6.1, AIX 5.3, AIX 5.2, Solaris 10, Solaris 9, Solaris 8, Linux Red Hat AS 4.0 64-bit Supported

11g R2 HP-UX 11i v1, Solaris 8, Solaris 9, Solaris 10, AIX 5.2, AIX 5.3, AIX 6.1, Linux Red Hat AS 4.0 32-bit, Linux Red HatAS 4.0 64-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 5.0 64-bit, HP-UX 11i v2 Supported

Not Supported Not Supported

35



Redhat

EXT2 Linux (AS/ES) 4.0 32-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 64-bit Supported N/A Supported

EXT3 Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 4.0 32-bit, Linux (AS/ES) 5.0 32-bit Supported N/A Supported

Linux LVM Linux (AS/ES) 4.0 32-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 4.0 64-bit, Suse Linux ES10 32-bit, Suse Linux ES 10 64-bit Supported N/A Not Supported

Sun

Solstice Disk Suite /Solaris VM

Solaris 8, Solaris 9, Solaris 10 Supported N/A Not Supported

ZFS Solaris 10(update 4 onwards) N/A Not Supported

Solaris UFS Solaris 9, Solaris 8, Solaris 10 Supported N/A Supported

Zones Solaris 10 (update 3 onwards) N/A N/A

Sybase ASE

11.9.3 Solaris 9, Solaris 10, Solaris 8 Supported

12.0 Solaris 9 Supported

12.5.1 Solaris 9, Solaris 8 Supported




15.0 Solaris 9, Solaris 10, Solaris 8 Supported


Supported Supported

36



Symantec

Cluster Server

3.5 Solaris 9, HP-UX 11i v2, AIX 5.2, Solaris 8, HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3 Supported

4.0 AIX 5.3, Linux (AS/ES) 3.0, Solaris 9, Solaris 8, AIX 5.2 Supported

4.1

Suse Linux ES 10 64-bit, Suse Linux ES 9 64-bit, Linux Red Hat AS 5.0 32-bit, Suse Linux ES 9 32-bit, Suse Linux ES10 32-bit, Linux Red Hat AS 5.0 64-bit, Linux Red Hat AS 4.0 64-bit, HP-UX 11i v2, Windows 2003-64bit, Windows2000, Solaris 9, Linux Red Hat AS 4.0 32-bit, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Windows 2003-32bit,Solaris 10, Solaris 8, Linux Red Hat AS 3.0 32-bit

Supported

4.3 Windows 2003-32bit, Windows 2003-64bit, Windows 2000 Supported

5.0Solaris 9, Windows 2000, Windows 2003-64bit, HP-UX 11i v2, AIX 6.1, Solaris 8, Linux Red Hat AS 5.0 64-bit, LinuxRed Hat AS 4.0 64-bit, AIX 5.2, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Windows 2003-32bit, Solaris 10, LinuxRed Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit, AIX 5.3

Supported

5.1

HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat AS 4.0 32-bit, AIX 6.1, AIX 5.3, AIX 5.2, Linux Red Hat AS 5.0 32-bit,Linux Red Hat AS 4.0 64-bit, HP-UX 11i v2, Windows 2003-32bit, Solaris 8, HP-UX 11i v1, Solaris 9, Windows 200864-bit, Windows 2003-64bit, Linux Red Hat AS 5.0 64-bit, Windows 2008 32-bit, Solaris 10, Linux Red Hat AS 3.0 32-bit

N/A

NetBackup

4.5 Linux (AS/ES) 4.0 32-bit, AIX 5.2, HP-UX 11i v1, Windows 2000, Solaris 9, Solaris 8, Linux (AS/ES) 3.0 N/A

5.0 Linux Red Hat AS 4.0 32-bit, HP-UX 11i v2, Windows 2003-32bit, Solaris 9, AIX 5.2, Solaris 8, Windows 2000, HP-UX11i v1, HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit N/A

5.1 Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 32-bit, HP-UX 11i v2, Windows 2003-32bit, Solaris 10, AIX 5.2, Solaris 9, Windows 2000, HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3, Solaris 8 N/A

6.0 Solaris 9, Windows 2000, HP-UX 11i v1, Linux Red Hat AS 4.0 32-bit, AIX 5.2, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3,Linux Red Hat AS 4.0 64-bit, HP-UX 11i v2, Windows 2003-32bit, Solaris 10, Solaris 8 N/A

N/A Not Supported

Storage Foundationfor Windows

4.1 Windows 2000, Windows 2003-32bit Supported

4.2 Windows 2000, Windows 2003-32bit Supported

4.3 Windows 2000, Windows 2003-32bit, Windows 2003-64bit Supported

5.0 Windows 2000, Windows 2003-32bit, Windows 2003-64bit Supported

5.1 Windows 2003-64bit, Windows 2003-32bit, Windows 2008 32-bit, Windows 2008 64-bit Supported

Supported Supported

Storage Foundationfor Unix

3.5 Solaris 8, Solaris 9, HP-UX 11i v2, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1 Supported

4.0 Linux (AS/ES) 3.0, AIX 5.3, AIX 5.2, Solaris 9, Solaris 8 Supported

4.1Suse Linux ES 10 32-bit, Suse Linux ES 9 32-bit, Linux Red Hat AS 5.0 32-bit, HP-UX 11i v2, Linux Red Hat AS 4.032-bit, Solaris 10, Solaris 8, Suse Linux ES 10 64-bit, Suse Linux ES 9 64-bit, Linux Red Hat AS 5.0 64-bit, Linux RedHat AS 4.0 64-bit, HP-UX 11i v3 (PA-RISC & IA), Solaris 9

Supported

5.0 Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 4.0 32-bit, AIX 5.2, HP-UX 11i v1, Solaris 9, HP-UX 11i v2, Solaris 8, AIX 6.1,Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 32-bit, AIX 5.3, Solaris 10 Supported

5.1

Solaris 10, HP-UX 11i v1, Linux (AS/ES) 4.0 32-bit, Solaris 9, HP-UX 11i v2, Linux (AS/ES) 4.0 64-bit, AIX 5.3, Linux(AS/ES) 5.0 32-bit, Solaris 8, AIX 5.2, AIX 6.1

Supported Supported

37



CommandCentralStorage

Agent/Managed Host

4.1 Solaris 9, Windows 2003-32bit, HP-UX 11i v2, AIX 5.2, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Windows 2000,Solaris 8 N/A

4.2

Linux Red Hat AS 5.0 64-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit, AIX 5.3, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Windows 2003-32bit, Solaris 10, Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, SuseLinux ES 9 64-bit, Solaris 8, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 3.0 32-bit, AIX 5.2, HP-UX 11i v2,Windows 2003-64bit, Windows 2000, Solaris 9, Suse Linux ES 9 32-bit

N/A

5.0

HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Solaris 9, AIX 5.3, Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS 5.032-bit, Suse Linux ES 9 32-bit, Suse Linux ES 10 32-bit, AIX 6.1, HP-UX 11i v2, Windows 2000, Solaris 10, Solaris 8,Windows 2003-32bit, Suse Linux ES 10 64-bit, Suse Linux ES 9 64-bit, Linux Red Hat AS 5.0 64-bit, Linux Red HatAS 4.0 64-bit, Linux Red Hat AS 3.0 32-bit, AIX 5.2, Windows 2003-64bit

N/A

5.1

AIX 5.3, Suse Linux ES 10 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, HP-UX 11iv3, Linux Red Hat ES4.0 64-bit, Linux Red Hat AS 4.0 32-bit, Linux Red Hat ES 5.0 64-bit, Linux Red Hat ES 5.0 32-bit, VMware ESX *,Linux Red Hat AS 3.0 32-bit, Suse Linux ES 9 32-bit, Windows 2008 64-bit, HP-UX 11i v1, AIX 5.2, Linux Red Hat ES4.0 32-bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2003-32bit, Solaris 8, Windows 2000, Solaris 10,Solaris 9, HP-UX 11i v2, Linux Red Hat ES 3.0 32-bit

N/A

5.1.1

Windows 2008 64-bit, Linux Red Hat ES 5.0 64-bit, Linux (AS/ES) 4.0 32-bit, Linux Red Hat ES 5.0 32-bit, Windows2008 32-bit, AIX 5.3, Windows 2003-32bit, Windows 2003-64bit, Linux (AS/ES) 3.0, HP-UX 11i v1, HP-UX 11i v2, AIX5.2, AIX 6.1, Solaris 8, HP-UX 11iv3, Solaris 10, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, Windows 2000, Solaris 9

N/A

5.1.2

Linux (AS/ES) 4.0 32-bit, Suse Linux ES 10 32-bit, Linux Red Hat ES 5.0 64-bit, Windows 2008 32-bit, Linux Red HatES 5.0 32-bit, Windows 2008 64-bit, Windows 2003-64bit, Windows 2003-32bit, Windows 2000, Suse Linux ES 9 64-bit, Suse Linux ES 10 64-bit, Solaris 10, Solaris 9, Solaris 8, AIX 5.3, AIX 6.1, AIX 5.2, HP-UX 11iv3, HP-UX 11i v2,HP-UX 11i v1, Linux (AS/ES) 3.0, Suse Linux ES 9 32-bit

N/A

5.2

Linux Red Hat ES 5.0 64-bit, Linux Red Hat ES 5.0 32-bit, Windows 2008 64-bit, Windows 2003-64bit, Windows 2003-32bit, Windows 2000, Suse Linux ES 10 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, AIX 6.1, Solaris 9, Solaris 8, AIX 5.3, AIX 5.2, HP-UX 11iv3, HP-UX 11i v2, HP-UX 11i v1, Linux (AS/ES) 3.0,Windows 2008 32-bit, Solaris 10, Linux (AS/ES) 4.0 32-bit

N/A

N/A N/A

Web console BrowserSupport

FF Windows 2000, Windows 2003-32bit, Windows 2003-64bit N/A

IE Windows 2000, Windows 2003-32bit, Windows 2003-64bit N/A

M Solaris 8, Solaris 9, Solaris 10 N/A

N/A N/A

CommandCentralremote Install (From)

Sol 10 Solaris 9, Solaris 8, Solaris 10 N/A



Win2k Windows 2000, Windows 2003-64bit, Windows 2003-32bit, Windows 2008 32-bit N/A

Not Supported N/A

CommandCentralPush Install Utility

(From)

AIX 5.2 AIX 5.2, AIX 5.3, AIX 6.1 N/A

AIX 5.3 AIX 6.1, AIX 5.2, AIX 5.3 N/A

HP-UX 11iv1 HP-UX 11i v1, HP-UX 11i v2 N/A

HP-UX 11iv2 HP-UX 11i v1, HP-UX 11i v2 N/A

RH AS/ES 3.0 Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 4.0 32-bit, Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 32-bit N/A

RH AS/ES 4.0 Linux (AS/ES) 4.0 32-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 4.0 64-bit N/A




Win 2k Windows 2008 64-bit, Windows 2000, Windows 2003-32bit N/A

Win 2k3-32 Windows 2000, Windows 2008 32-bit, Windows 2003-32bit N/A

Win 2k3-64 Windows 2000, Windows 2008 64-bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2003-32bit N/A

Win 2k8-32 Windows 2000, Windows 2003-32bit, Windows 2008 32-bit N/A

Win 2k8-64 Windows 2000, Windows 2003-32bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2008 64-bit N/A

Not Supported N/A

CommandCentralStorage Management

Server5.1.2

Solaris 10, Solaris 9, Windows 2003-64bit, Solaris 8, Windows 2003-32bit, Windows 2000N/A Not Supported N/A

38



VMware

CommandCentralStorage ManagedHost on Guest OS

5.0 5.1 5.1.2 5.2Windows 2003-32bit, Windows 2008 32-bit, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit, Windows 2003-64bit, Windows 2008 64-bit, Linux Red Hat AS 4.0 32-bit, VMware ESX * supported N/A Not Supported

ESX Server - SMI-S(1.0.2)

3.0.0,3.0.1, 3.5, 3.5update 1, 2, 3 & 4

VMware ESX * Not Supported N/A Not Supported

Virtual Center (VI SDK2.0) 2.0 2.5 4.0 VMware ESX * N/A N/A Not Supported

ESX Server (VI SDK2.0)

3.0.1 3.1 3.5 3.5.1 3.5.24.0

VMware ESX * N/A N/A Not Supported

vSphere 4.0 VMware ESX * Not supported N/A

1. 2K = Windows 2000: Server, Advanced Server, Datacenter Server

2. 2K3-32 = Windows 2003-32bit: Standard, Datacenter, Enterprise, Web

3. 2K3-x64= Windows 2003-64bit (Xeon/Opteron): Datacenter, Enterprise

4. No support for IA64 (Itanium) Windows, either Management Server or Managed Host

5. Linux = Red Hat Advanced Server/Enterprise Server

i) The Cluster Support column indicates CommandCentral Storage's ability to discover and correlate these applications in clustered environments. Unless otherwise indicated, an "X" means support for both VCS and MSCS.

ii) The Application Correlation column indicates CommandCentral Storage's ability to correlate the application running on the host to the file system or volume that it is associated with.

6. IE = Internet Explorer 6.x, FF = Firefox 1.07, 1.5, 2.0.0.x, 3.0 M = Mozilla 1.7

7. *AIX 5.3 will be supported with Storage Foundation 4.0 MP1.

8. Cluster support is not available for Sybase 15.0 and 15.0.2

Application Correlation is Supported for EMC PP 5.1 and 5.3.1.2

CommandCentral Storage -Software - Unified Agent

VendorApplication

Software Version Supported OS

Application

Correlation

Cluster

Support

EMC PowerPath 5 Windows 2003-64 bit, Solaris 10, Linux Red Hat 5, N/A N/A

8.x Linux Red Hat 4, AIX 5.3, Solaris 10, AIX 6.1

9.x Linux Red Hat 4, AIX 5.3, Solaris 10

2000 Windows 2003-64 bit


2008 Windows 2008-64 bit, Windows 2003-32 bit


2007 Windows 2008-64 bit, Windows 2008-32 bit

11g R1 AIX 6.1

10g R2 Solaris 10, HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat 5,

RAC 10g R2 Solaris 10, HP-UX 11i v3 (PA-RISC & IA)

12.5

15

Cluster Server 5 Solaris 10, HP-UX 11i v3 (PA-RISC & IA) Supported N/A

Storage

Foundation for

Windows

5.1 Windows 2003-64 bit, Windows 2008-64 bit, SupportedNot

supported

5Solaris 10, HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat 5, Linux Red Hat

4, Suse Linux ES 10, AIX 5.3, AIX 6.1, Suse Linux ES 9

5.1 Solaris 9, Solaris X86

39

N/A

Storage

Foundation for

Unix

Supported

Supported

Symantec

Sybase ASE

Not

supported

IBM DB2

Microsoft

SQL Server

N/A

Exchange

N/A

N/A

Oracle DBOracle N/A Supported

Solaris 10 N/A

CommandCentral Storage - Software - Agentless

VendorApplication

Software Version Supported OS

Application

Correlation

Cluster

Support

5.3 Windows 2003 64-bit

5.2 Solaris 10, Windows 2008 32-bit, Windows 2008 64-bit

5.1 Suse Linux ES 9, Suse Linux ES 10

5.0Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 32-bit,

Linux (AS/ES) 5.0 64-bit, Solaris 9, Solaris 10

AIX LVM N/A AIX 5.2, AIX 5.3, AIX 6.1

AIX JFS N/A AIX 5.2, AIX 5.3, AIX 6.1

AIX JFS2 N/A AIX 5.2, AIX 5.3, AIX 6.1

NTFS N/AWindows 2003 32-bit, Windows 2003 64-bit, Windows 2008 32-bit,

Windows 2008 64-bit

LDM N/AWindows 2003 32-bit, Windows 2003 64-bit, Windows 2008 32-bit,

Windows 2008 64-bit

EXT2, EXT3,

EXT4, XFS,

JFS

N/ALinux (AS/ES) 4.0 32-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 5.0 64-bit, Linux

(AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 64-bit

Linux LVM N/ALinux (AS/ES) 4.0 32-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 5.0 64-bit, Linux

(AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 64-bit

EXT2, EXT3,

EXT4, XFS,

JFS

N/ASuse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, Suse Linux 9, Suse Linux

11 64-bit

Linux LVM N/ASuse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, Suse Linux 9, Suse Linux

11 64-bit

UFS N/A Solaris 8, Solaris 9, Solaris 10

LOFS N/A Solaris 10

ZFS N/A Solaris 10 (Update 4 onwards)

Zones N/A Solaris 10 (Update 3 onwards)

5.0

AIX 5.2, AIX 5.3, AIX 6.1, Windows 2003 32-bit, Windows 2003 64-bit,

Windows 2008 32-bit, Windows 2008 64-bit, Solaris 8, Solaris 9, Solaris 10,

Linux Red Hat 4, Linux Red Hat 5, Linux Red Hat 5.5, Suse Linux ES 8,

Suse Linux ES 9, Suse Linux ES 10

5.1

AIX 5.2, AIX 5.3, AIX 6.1, Windows 2003 32-bit, Windows 2003 64-bit,

Windows 2008 32-bit, Windows 2008 64-bit, Solaris 8, Solaris 9, Solaris 10,

Linux Red Hat 4, Linux Red Hat 5, Linux Red Hat 5.5, Suse Linux ES 8,

Suse Linux ES 9, Suse Linux ES 10

5.0 Windows 2003 32-bit, Windows 2003 64-bit

5.1Windows 2003 32-bit, Windows 2003 64-bit, Windows 2008 32-bit,

Windows 2008 64-bit

40

N/A

N/A

N/A

N/A N/A

IBM

Symantec

Storage

Foundation For

Windows

Supported

N/A

N/A

N/A

Cluster Server N/A

N/A

Microsoft N/A

Red Hat N/AN/A

Sun

EMC PowerPath N/A

SUSE

CommandCentral Storage - Software - Agentless

VendorApplication

SoftwareVersion Supported OS

Application

Correlation

Cluster

Support

4.0 Solaris 8, Solaris9

4.1 Solaris 8, Solaris9

5.0

AIX 5.2, AIX 5.3, AIX 6.1, Solaris 8, Solaris 9, Solaris 10, Linux Red Hat 4,

Linux Red Hat 5, Linux Red Hat 5.5, Suse Linux ES 8, Suse Linux ES 9,

Suse Linux ES 10

5.1

AIX 5.2, AIX 5.3, AIX 6.1, Solaris 8, Solaris 9, Solaris 10, Linux Red Hat 4,

Linux Red Hat 5, Linux Red Hat 5.5, Suse Linux ES 8, Suse Linux ES 9,

Suse Linux ES 10

VMware

Agentless

Discovery of

Guest OS

N/AWindows 2003 32-bit, Windows 2003 64-bit, Windows 2008 32-bit,

Windows 2008 64-bit, Red Hat Linux 4.0 N/A N/A

41

Symantec

Storage

Foundation for

Unix

N/A Supported

veritas commandcentralâ„¢ hardware and software compatibility list

Documents