V E R S A S T O N E ®

Vers

asto

ne®

| C

harc

oal

Versastone features a an architecturally inspired shotblast surface texture which exposes the natural aggregate stones in each block. This premium interlocking retaining wall system will enhance your home by adding depth, dimension and enviable aesthetics to your garden.

®Versastone

ersastone

option 1

option 2

option 3 ersawall

ersawalloption 4

Versastone® Capping Unit

390mm

190mm

40mm

COLOUR OPTIONS

THE VERSASTONE® RANGE

CHAR

COAL

RECOMMENDED FOR

Garden Steps Landscape Wall

Engineered Wall

Vertical Walls

Whilst these swatches provide a good indication of the products colour, you should always sight product samples before use. Due to natural variations in aggregates, colours may vary.

Versastone® Standard Unit Versastone® Corner Unit*

*Versastone® corner units are sold as pairs

400mm 390mm

200mm 200mm

190mm 190mmunique self interlocking lugs premium shotblast

texture

FEATURES INCLUDE

Lightweight blocks are easy to handle

Unique textured surface on each block

Pure vertical wall which saves space

Patented lugs and joints makes installation easy

Build unreinforced walls to 600mm in height

Vers

asto

ne®

| C

harc

oal

Products Type Size (mm) w x h x d No. per m2 Approx. unit

weight (kg)No. per pallet Colours

Versastone® 400 x 200 x 190 12.5 15.27 90

CharcoalVersastone® Cap 390 x 40 x 190 2.5 L/m 7.00 288

Versastone®

Corner (LH / RH) 390 x 200 x 190 - 15.3872

(36 of each corner)

Level slope

Low permeability top soil layer

No structural load within this zone

20MPa concrete leveling pad (600mm x 150mm) 1.5

1

NOTE: Allow minimum 50mm ebeddment to cover leveling pad

Height varies

Foundation replacement zone compacted roadbase 98% min RDD if required (600mm x 150mm)

Additional extent of foundation replacement zone required when NFC infill material is used

Ø100mm socked subsoil drain 2% fall to discharge at 20m max centres

Adbri Masonry Versastone® units and Universal caps

See Table

Contact Us

adbrimasonry.com.au

1300 365 565

enquiries@adbri.com.au

Versastone® BrochureNSW - May 2015

ABMXXXX

Adbri Masonry Pty Ltd ABN: 31 009 687 521

Versastone® and the Adbri Masonry logo are registered trademarks of Adbri Masonry Pty Ltd.

For the full range of my hints, tips and DIY videos visit us at adbrimasonry.com.au/diy

The information in this brochure is to be used only with the specific Adbri Masonry products shown. All images, designs, drawings and other depictions of the installation and/or use of products in this document are examples only, and should not be relied on. To the maximum extent permitted by law, in no circumstances will Adbri Masonry be liable to any party for any direct, indirect, consequential, incidental, special or economic loss, damage or injury (which may include loss of profits, loss or damage to goodwill, direct or indirect loss or damage to equipment or property, loss or damage arising from accident, loss of profits or other commercial losses) suffered or incurred by that party.

Adbri Masonry makes no express warranties or representations regarding the products, designs or information set out in this document, and to the maximum extent permitted by law, excludes all representations, warranties, terms, conditions and guarantees regarding the products and designs and information set out in this document, and any other goods or services supplied or provided by Adbri Masonry to the customer that are implied by law (including the general law) or custom. While Adbri Masonry does not exclude, restrict or modify any guarantees, warranties and conditions implied by applicable laws that cannot lawfully be excluded, restricted or modified, including but not limited to those set out in the Australian Consumer Law, to the maximum extent permitted by law Adbri Masonry's liability to any party for a breach of any such applicable non-excludable terms is limited to, at the option of Adbri Masonry: (a) in the case of goods - replacement of the goods, the supply of equivalent goods, repair of the goods, payment of the cost of replacing the goods or acquiring equivalent goods, or payment of the costs of having the goods repaired; and (b) in the case of services - the supply of the services again or payment of the cost of having the services supplied again.

Designs only apply where the soil at the top of the structure is level, any slope will require the customer to refer to the technical specification brochure.

PROJECT TYPES AND WALL CROSS SECTIONS

Existing soil

20mm drainage aggregate column and to fill block voids

No structural load within this zone

1.5

1

NOTE: Allow minimum 50mm ebeddment to cover leveling pad

Max 600mm high3 courses + cap

450 x 130mm compacted roadbase or concrete pad

Ø100mm socked subsoil drain 2% fall to discharge at 20m max centres

Corefill to engineeredspecification with eitherconcrete corefill groutor drainage gravel.

300mm

Adbri Masonry Versastone®

units and caps

Garden soil

300mm

Max 600mm high3 courses + cap

450 x 130mm compacted roadbaseor concrete pad

20mm drainage aggregate column and to fill block voids

Ø100mm socked subsoil drain 2% fall to discharge at 20m max centres

NOTE: Allow minimum 50mm ebeddment to cover leveling pad

Adbri Masonry Versastone®

units and Universal caps

Versastone® Cross Section - No Fines Concrete (NFC)

Versastone® Design Heights

Versastone® Cross Section - Raised PlanterVersastone® Cross Section - Retaining Wall

600 agg 300

800 NFC* 300

1000 NFC* 325

1200 NFC* 375

1400 NFC* 475

Height (mm) Infill Depth (mm)