veterinary osteosynthesis - n2n2-uk.com/wp-content/uploads/2018/11/n2-implant... · cancellous bone...

VETERINARYOsteosynthesis

www.n2-uk.com

+44 (0)23 9323 3265 @n2ukcom

www.facebook.com/n2ukltd [email protected]

UK manufactured

RP TPLOThere are many TPLO plate ranges and shapes. The choice can be personal or dictated by existing in-house inventory. We have been developing a new style of plate for over 12 months with Rory Paton BVSc Cert AVP MRCVS who believed there were several accessible improvements that could be made to existing offerings.The result is the RP-TPLO plate range which is due out very soon. The shape and contour have been meticulously tested to ensure an optimal bone-plate alignment. At the top of a list of a whole host of improvements, sits the opportunity for offset compression to preserve the periosteal vasculature.

Coming Soon• Offset compression - unique temporary locking plugs

preserve periosteum during osteotomy compression• Polyaxial locking - surgeon aims for the fibular head and

avoids the joint• Unique shape - precontoured to the postop Plateau-

Levelled Tibia.• Standard locking and cortical screws. Keep your

inventory!• Digital template support only on vPOP-pro• Polyaxial locking - avoid your reduction pin• Ruler - no more callipers• Numbered holes - for screw insertion• Polyaxial locking - neutral to mechanical axis• Radial and cranial osteotomy compression• Polyaxial locking - diverge to maximise pullout resistance• Holes for temporary forcep, kwire and retractor

positioning

www.n2-uk.com2

UK manufactured

EVOLOX® 2.4mm TPLO Version 2scale 1:1

Also coming soonl EVOLOX® Cranial Pantarsal Plates

l 2.0mm TPLO Plates

l CBLO Plate range

This completely re-engineered and reconfigured TPLO Plate incorporates a range of technical features designs for greater osteotomy stability and reduced healing times

New Head Features:• All Evolox® screw holes allowing enhanced freedom

of screw orientation and optimal bone purchase • Evolox® proximal screw hole configuration ensures

joint space avoidance even where contouring of the plate is necessary

• New curved profile ensures head-screw holes overlie osteotomised tibial fragment allowing more central screw placement in the thickest available bone

New Shaft features:• Angled proximal compression hole perpendicular to

the osteotomy line ensures correct compression of the central zone

• Offset distal compression hole ensures compression of the proximal zone of the osteotomy

• Single central Evolox® hole reducing implant costsOur Version One Evolox® 2.4mm TPLO Plate is still available and remains a premier choice for the closing wedge technique (using left as right and visa versa)

3

About usN2 (UK) Ltd was first started in March 2013 by two director/owners of the medical manufacturing facility Global Orthopaedics UK Ltd.In 2013 it became apparent to us a dedicated company was required to deal solely with the veterinary industry, one that could dedicate time and money to research, development, and intellectual property protection, whilst Global Orthopaedics focused on maintaining its high quality and regulated manufacturing facility to both the veterinary and human markets. Thus N2 (UK) Ltd was born.Neil Walters and Nick Gardener have both been at the forefront of medical human and veterinary orthopaedic device manufacture and design with over 30 years of experience between them.Nick remains MD of Global Orthopaedics while also being heavily involved in N2’s design and marketing.Neil Is CEO of N2 UK Ltd ensuring the smooth running of the company, while also maintaining his role at Global Orthopaedics as Regulatory Affairs Director.Having control of both facilities enables us to coordinate manufacture to sales demand and keep our distributors in stock with short lead times.In 2017 Andy Robinson joined N2 heading up sales and marketing for us. Andy has over 16 years’ experience in the veterinary orthopaedic market and brings a wealth of knowledge to the company.We recently moved into a new larger warehousing facility close to the manufacturing plant to help deal with the customer growth and subsequent increase in stock holding. This has allowed us to maintain a high level of service to our customers and a logistical efficiency between manufacturing and despatching our implants that is unsurpassed in the market.

www.n2-uk.com4

UK manufactured

Why choose our products?l High Quality

l Value for Money

l Reduced Carbon Footprint

l Access to New Innovative Products

l Unique Surgical Specific Custom Plates

5

6

Value for money � Having control of both facilities enables us to produce cost-

effective batch runs and keep stock levels to an economic level � Manufacturing under ISO9001 quality management system

ensures that continual process improvements are achieved � Latest technology, machining strategies and tooling

advancement has enabled us to fix our prices since 2013 through improved manufacturing times. Our aim is to continue this trend into the foreseeable future

� More importantly we believe in charging fair prices and not just replicating competitors prices, which would often result in overcharging

Reduced Carbon Footprint � Products are manufactured in the United Kingdom � Raw materials are sourced and certified from Europe � Transport of materials and finished goods are kept to a

minimum � Machining strategies and tool coatings help reduce the power

requirements of machine tools � Automation enables an additional 50% unmanned machining

time reducing the impact from heat and lighting

www.n2-uk.com

High Quality � Products are manufactured from certified medical grade

materials � Products are manufactured under an ISO quality management

system � Products are finished and laser identified � Products are inspected to ISO:2859-1 � Products are cleaned and passivated ready for sterilisation � Bioburden tests are carried out to ensure a low CFU (colony

forming unit) count is maintained

Held by Global Orthopaedics UK Ltd.

UK manufactured

Unique Custom PlatesNot all orthopaedic cases can be solved by utilising our extensive range of products. Sometimes it calls for something totally unique. We offer, exclusively to our partner network a bespoke service for custom plates at good prices and quick delivery (usually within 2 weeks).Below are some of our case studies that we were proud to have been involved with.

Dual Special Locking PCAChaim Pilosof MRCVS

Miniature Locking PCA

Rory Paton BVSc Cert AVP MRCVS

Titanium Poly-Axial LockingElvin Kulendra BVetMed MVetMed CertVDI DipECVS FHEA MRCVS

7

www.n2-uk.com

Contents Page

Accreditations 4 - 7

Bone Screws 9 - 46

Drill bits, Screwdrivers and Taps 47 - 56

Wires and Pins 57 - 64

Locking Screws 65 - 76

Locking Plates 77 - 88

Bone Plates 89 - 147

Titanium Plates 144 - 147

Evolox® Locking System 148 - 172

Tibial Tuberosity Advancement (TTA) 173 - 177

Choices and Preferential Options 180

Technical Data and Processes 181

N2 (UK) Ltd Terms & Conditlons Of Trade 182 - 183

Index 184 - 185

All photographs and text appearing are the exclusive property of N2 UK Limited and are protected under international copyright laws.

Photographs may not be reproduced, copied, stored, or manipulated in any form without the written permission of N2 UK Limited and/or the respective photographer. This includes use of any image as part of another photographic concept or illustration. No photograph or image or any part of this catalogue is within public domain under section 17 Copyright, Design & Patents Act, 1988.

8

Bone Screws

9

www.n2-uk.com

Cortical HA PageCortical Bone Screw 1.5mm 14Cortical Bone Screw 1.5mm Self Tapping 15Cortical Bone Screw 2.0mm 16Cortical Bone Screw 2.0mm Self Tapping 17Cortical Bone Screw 2.0mm T6 Star Torx Drive 17Cortical Bone Screw 2.0mm Self Tapping (Cruciform) 18Cortical Bone Screw 2.4mm Self Tapping 1.5mm Hex Drive 19Cortical Bone Screw 2.4mm Self Tapping 2.0mm Hex Drive 19Titanium Cortical Bone Screw 2.4mm Cruciform Drive 202.4mm Titanium Cortical Bone Screw Self Tapping 1.5mm Hex Drive 212.4mm Titanium Cortical Bone Screw Self Tapping 2.0mm Hex Drive 21Cortical Bone Screw 2.4mm Self Tapping (Cruciform) 22Cortical Bone Screw 2.4mm Self Tapping (Star Torx Drive) T8 23Cortical Bone Screw 2.7mm 24Cortical Bone Screw 2.7mm Self Tapping 25Titanium Cortical Bone Screw 2.7mm Self Tapping 26Cortical Bone Screw 2.7mm Self Tapping (Star Torx Drive) T8 27Cortical Bone Screw 3.5mm 28Cortical Bone Screw 3.5mm Self Tapping 29Cortical Bone Screw 3.5mm Self Tapping (Star Torx Drive) T15 30Titanium Cortical Bone Screw 3.5mm Self Tapping 31Cortical Bone Screw 4.5mm 32Cortical Bone Screw 4.5mm Self Tapping 33Titanium Cortical Bone Screw 4.5mm Self Tapping 34Cortical Shaft Screw 4.5mm (Lag Screw) 35Cortical Bone Screw 5.5mm 36Cortical Bone Screw 5.5mm Self Tapping 37

Cancellous HB PageCancellous Bone Screw 2.2mm Full Thread Self Tapping (spiral point) 38Cancellous Bone Screw 3.0mm Full Thread Self Tapping (spiral point) 39Cancellous Bone Screw 3.5mm Full Thread (round end) 40Cancellous Bone Screw 4.0mm Full Thread Self Tapping (spiral point) 41 Cancellous Bone Screw 4.0mm Part Thread Self Tapping (spiral point) 42

HC PageSherman Screw 2.0mm HC Thread 43Sherman Screw 2.7mm (2.9mm actual) HC Thread 43Sherman Screw 3.5mm HC Thread 44Headless Compression Lag Screws 444.5mm IOHC (Incomplete ossification of the humeral condyle) 45IOHC Cortical Shaft Screw 4.5mm 45

Specialist PageSuture Anchor Screws (Self Tapping) 46Suture Pins (Snap-Off) 46

10

UK manufactured

Orthopaedic Bone ScrewsThe new edition of the catalogue brings some new head drive options for common Cortical screws. By popular demand and increased flexibility, our most common self Tapping Cortical screws have a choice of Hex Drive, Star Torx Drive or Cruciform.

All of our screws are made using latest CNC Swiss Turning technology and sold equally in the Human Market. We only use raw materials from Europe or America which are fully certified to the latest ISO specifications and fully tested and chemically analysed prior to manufacturing .

All of our Implants are periodically tested for bio burden contaminates to ensure our manufacturing processes meet stringent quality standards.

All of our screws specifications are made to Strict Human ISO 5835 criteria. Although Veterinary Implants are not regulated we always insist they are made to Human quality control standards.

There has always been an open invitation for visits to our manufacturing facilities to see exactly how the Implants are made or to discuss new ideas.

A Visual Image of the thread forms

HC Thread Form

HA Thread Form

HB Thread Form

Look for the following symbols for your choice of driver.

Hexagonal Drive

Star Torx drive (TD)

Cruciform (SD)

Single Slot

Order Code explained

COR-ST 35 — 20 — TD

Diameter 3.5mm

Overall Length of Screw

20

Torx ‘Star’ Drive

A simple guide to screw identification and ordering

COR = Cortical Screw

CAN = Cancellous

LOC = Locking

ST = Self Tapping

11

www.n2-uk.com

Chemical Composition of Stainless SteelElement Mass fraction %Carbon 0,030 max.Silicon 1,0 max.

Manganese 2,0 max.Phosphorus 0,025 max.

Sulfur 0,010 max.Nitrogen 0,10 max.

Chromium 17,0 to 19,0 max.Molybdenum 2,25 to 3,0

Nickel 13,0 to 15,0Copper 0,50 max.

Iron Balance

Mechanical properties of bars (Bone Screws)

Condition

Diameter or thickness

Tensile strength

0,2 % proof stress of non-proportional

elongation

Elongation after fracture/Gauge

lengthd

mmRm MPa

Rp0,2min MPa

Amin %

Annealed All 490 ≤ Rm ≤ 690 190 40Cold-worked ≤ 22 860 ≤ Rm ≤ 1 100 690 12Extra-hard ≤ 8 ≥ 1 400 — —

Mechanical properties of strip and sheet (Bone Plates)

Condition

Tensile strength0,2 % proof stress

of non-proportional elongation

Elongation after fracture/Gauge

lengthRm MPa

Rp0,2min MPa

Amin %

Annealed 490 ≤ Rm ≤ 690 190 40Cold-worked 860 ≤ Rm ≤ 1 100 690 12

12

UK manufactured Sc

rew

Dia

met

er (m

m)

Thre

ad

Dia

met

er1.

52.

02.

42.

73.

54.

55.

52.

23.

03.

54.

06.

52.

02.

0/2.

42.

42.

72.

7/3.

53.

52.

02.

73.

5

Scre

w

Type

Cor

tical

Can

cello

usLo

ckin

g H

ead

Sher

man

Full

thre

adFu

ll th

read

Parti

al

thre

adFu

ll th

read

32m

m

thre

ad16

mm

th

read

Dril

l bit

and

Tap

Dia

met

er (m

m)

Dril

l Bit

for G

lidin

g H

ole

1.5

2.0

2.4

2.7

3.5

4.5

5.5

2.2

3.0

3.5

4.0

2.5

6.5

4.5

2.0

3.0

3.5

GO CO

GO CO

GO CO

GO CO

GO CO

GO CO

GO CO

GO CO

GO CO

GO CO

GO CO

GO CO

GO C

GO C

GO C

Dril

l bit

for

thre

aded

ho

le1.

11.

51.

82.

02.

53.

24.

01.

52.

02.

52.

03.

21.

51.

51.

82.

02.

02.

71.

52.

22.

7

Tap

HA

1.5

HA 2.0

HA 2.4

HA 2.7

HA 3.5

HA 4.5

HA 5.5

HB

3.

5H

B

4.0

HB

6.

5LC

2.

0LC

2.

0LC

2.

4LC

2.

7LC

2.

7LC

3.

5LC

2.

0LC

2.

9LC

3.

5

Driv

e Ty

pe

1.5m

m

Hex

1.5m

m

Hex

Cru

ciat

e Sl

ot

Rec

ess

1.5m

m

Hex

2.0

Hex

2.0

Hex

C

ruci

ate

Rec

ess

T8

2.5m

m

Hex

Cru

ciat

e

Rec

ess

T8/T

15

3.5m

m

Hex

1.5m

m

Hex

2.5m

m

Hex

2.5m

m

Hex

3.5m

m

Hex

T6T8

1.5m

m

Hex T8

1.5m

m

Hex T8

2.5m

m

Hex

2.5m

m

Hex

T15

Sing

le

Slot

R

eces

s

Cru

ciat

e

Rec

ess

Stan

dard

Scr

ews,

Loc

king

Scr

ews,

Dril

l Bits

and

Tap

s

Glid

ing

hole

Thre

aded

ho

le

UK manufactured

13

www.n2-uk.com

Cortical Bone Screw 1.5mmOrder Code Length RRPCOR-1506 6 £3.55COR-1507 7 £3.66COR-1508 8 £3.77COR-1509 9 £3.89COR-1510 10 £3.99COR-1511 11 £4.09COR-1512 12 £4.21COR-1514 14 £4.32COR-1516 16 £4.43COR-1518 18 £4.54COR-1520 20 £4.64COR-1522 22 £4.76COR-1524 24 £4.86COR-1526 26 £4.97COR-1528 28 £5.08COR-1530 30 £5.19COR-1532 32 £5.30COR-1534 34 £5.41

Tip Configuration Standard screw round tip

CA

Length

Cortical (Cortex) Bone Screw Ø1.5mm Hexagonal

Thread Diameter 1.5mmThread Pitch (A) 0.5mmHexagon Socket (B) 1.5mmHead Diameter (C) 3.0mmDrill Bit for threaded hole 1.1mmDrill bit for gliding hole 1.5mmCore Diameter 1.1mmDrill for this product page 50Tap for this product page 54

B

14

UK manufactured

Cortical Bone Screw 1.5mm Self TappingOrder Code Length RRPCOR-ST-1506 6 £3.80COR-ST-1507 7 £3.92COR-ST-1508 8 £4.03COR-ST-1509 9 £4.15COR-ST-1510 10 £4.26COR-ST-1511 11 £4.38COR-ST-1512 12 £4.49COR-ST-1514 14 £4.62COR-ST-1516 16 £4.74COR-ST-1518 18 £4.85COR-ST-1520 20 £4.97COR-ST-1522 22 £5.08COR-ST-1524 24 £5.20COR-ST-1526 26 £5.31COR-ST-1528 28 £5.43



Tip Configuration Self tapping, one flute quadrant style

C

A

Length

B

15

www.n2-uk.com

Cortical Bone Screw 2.0mmOrder Code Length RRPCOR-2006 6 £3.55COR-2007 7 £3.66COR-2008 8 £3.77COR-2009 9 £3.89COR-2010 10 £3.99COR-2011 11 £4.11COR-2012 12 £4.21COR-2014 14 £4.32COR-2016 16 £4.43COR-2018 18 £4.54COR-2020 20 £4.65COR-2022 22 £4.76COR-2024 24 £4.86COR-2026 26 £4.98COR-2028 28 £5.08COR-2030 30 £5.20COR-2032 32 £5.30COR-2034 34 £5.42COR-2036 36 £5.52COR-2038 38 £5.63




CA

Length

B

16

UK manufactured

Cortical Bone Screw 2.0mm Self TappingOrder Code Length RRPCOR-ST-2006 6 £3.80COR-ST-2007 7 £3.90COR-ST-2008 8 £4.00COR-ST-2009 9 £4.09COR-ST-2010 10 £4.20COR-ST-2011 11 £4.30COR-ST-2012 12 £4.40COR-ST-2014 14 £4.50COR-ST-2016 16 £4.60COR-ST-2018 18 £4.70COR-ST-2020 20 £4.81COR-ST-2022 22 £4.90COR-ST-2024 24 £5.01COR-ST-2026 26 £5.11COR-ST-2028 28 £5.21COR-ST-2030 30 £5.31COR-ST-2032 32 £5.41COR-ST-2034 34 £5.51COR-ST-2036 36 £5.62COR-ST-2038 38 £5.71COR-ST-2040 40 £5.82

Cortical Bone Screw 2.0mm T6 Star Torx DriveOrder Code Length RRPCOR-ST-2006-TD 6 £4.33COR-ST-2007-TD 7 £4.43COR-ST-2008-TD 8 £4.53COR-ST-2009-TD 9 £4.62COR-ST-2010-TD 10 £4.72COR-ST-2011-TD 11 £4.83COR-ST-2012-TD 12 £4.93COR-ST-2014-TD 14 £5.03COR-ST-2016-TD 16 £5.13COR-ST-2018-TD 18 £5.23COR-ST-2020-TD 20 £5.34COR-ST-2022-TD 22 £5.43COR-ST-2024-TD 24 £5.54COR-ST-2026-TD 26 £5.64COR-ST-2028-TD 28 £5.74COR-ST-2030-TD 30 £5.84COR-ST-2032-TD 32 £5.94COR-ST-2034-TD 34 £6.04COR-ST-2036-TD 36 £6.15COR-ST-2038-TD 38 £6.24COR-ST-2040-TD 40 £6.35




A

Length

B

17

CB

www.n2-uk.com

Cortical Bone Screw 2.0mm Self Tapping (Cruciform)Order Code Length RRPCOR-ST-2006-CD 6 £3.80COR-ST-2007-CD 7 £3.90COR-ST-2008-CD 8 £4.00COR-ST-2009-CD 9 £4.09COR-ST-2010-CD 10 £4.20COR-ST-2011-CD 11 £4.30COR-ST-2012-CD 12 £4.40COR-ST-2014-CD 14 £4.50COR-ST-2016-CD 16 £4.60COR-ST-2018-CD 18 £4.70COR-ST-2020-CD 20 £4.81COR-ST-2022-CD 22 £4.90COR-ST-2024-CD 24 £5.01COR-ST-2026-CD 26 £5.11COR-ST-2028-CD 28 £5.21COR-ST-2030-CD 30 £5.31

Cortical Bone Screw 2.0mm Self Tapping (Cruciform)

Thread Diameter 2.0mmThread Pitch (A) 0.6mmHead Diameter (B) 4.0mmDrill Bit for threaded hole 1.5mmDrill bit for gliding hole 2.0mmCore Diameter 1.3mmDrill for this product page 50Tap for this product page 54


B

A

Length

18

UK manufactured

Cortical Bone Screw 2.4mm Self Tapping 1.5mm Hex DriveOrder Code Length RRPCOR-ST-2406 6 £3.80COR-ST-2408 8 £4.00COR-ST-2410 10 £4.20COR-ST-2412 12 £4.40COR-ST-2414 14 £4.60COR-ST-2416 16 £4.81COR-ST-2418 18 £5.01COR-ST-2420 20 £5.21COR-ST-2422 22 £5.41COR-ST-2424 24 £5.62COR-ST-2426 26 £5.82COR-ST-2428 28 £6.02COR-ST-2430 30 £6.22COR-ST-2432 32 £6.43COR-ST-2434 34 £6.63COR-ST-2436 36 £6.83COR-ST-2438 38 £7.02COR-ST-2440 40 £7.22

2.0mm Hex DriveOrder Code Length RRPCOR-ST-2406-H2 6 £3.80COR-ST-2408-H2 8 £4.00COR-ST-2410-H2 10 £4.20COR-ST-2412-H2 12 £4.40COR-ST-2414-H2 14 £4.60COR-ST-2416-H2 16 £4.81COR-ST-2418-H2 18 £5.01COR-ST-2420-H2 20 £5.21COR-ST-2422-H2 22 £5.41COR-ST-2424-H2 24 £5.62COR-ST-2426-H2 26 £5.82COR-ST-2428-H2 28 £6.02COR-ST-2430-H2 30 £6.22COR-ST-2432-H2 32 £6.43COR-ST-2434-H2 34 £6.63COR-ST-2436-H2 36 £6.83COR-ST-2438-H2 38 £7.02COR-ST-2440-H2 40 £7.22


Thread Diameter 2.4mmThread Pitch (A) 1.0mmHexagon Socket (B) 1.5mm and 2.0mm Head Diameter (C) 4.0mmDrill Bit for threaded hole 1.8mmDrill bit for gliding hole 2.4mmCore Diameter 1.6mmDrill for this product page 50Tap for this product page 54

Tip Configuration Self tapping, two flutes quadrant style

C

A

Length

B B

19

www.n2-uk.com

Titanium Cortical bone screw 2.4mm Hex Drive


Titanium Cortical Bone Screw 2.4mm Cruciform DriveOrder Code Length RRPTCS-2410 10 £6.83TCS-2412 12 £6.83TCS-2414 14 £6.83TCS-2416 16 £6.83TCS-2418 18 £6.83TCS-2420 20 £6.83TCS-2422 22 £7.25TCS-2424 24 £7.25TCS-2426 26 £7.25TCS-2428 28 £7.25TCS-2430 30 £7.25TCS-2432 32 £7.46TCS-2434 34 £7.67TCS-2436 36 £7.88TCS-2438 38 £8.09TCS-2440 40 £8.29

Low profile head for TTA


B

A

Length

20

UK manufactured

2.4mm Titanium Cortical Bone Screw Self Tapping 1.5mm Hex DriveOrder Code Length RRPTHS-2406 6 £6.83THS-2408 8 £6.83THS-2410 10 £6.83THS-2412 12 £6.83THS-2414 14 £6.83THS-2416 16 £6.83THS-2418 18 £6.83THS-2420 20 £6.83THS-2422 22 £7.25THS-2424 24 £7.25THS-2426 26 £7.25THS-2428 28 £7.25THS-2430 30 £7.25THS-2432 32 £7.46THS-2434 34 £7.67THS-2436 36 £7.88THS-2438 38 £8.09THS-2440 40 £8.29

2.0mm Hex DriveOrder Code Length RRPTHS-2410-H2 10 £6.83THS-2412-H2 12 £6.83THS-2414-H2 14 £6.83THS-2416-H2 16 £6.83THS-2418-H2 18 £6.83THS-2420-H2 20 £6.83THS-2422-H2 22 £7.25THS-2424-H2 24 £7.25THS-2426-H2 26 £7.25THS-2428-H2 28 £7.25THS-2430-H2 30 £7.25THS-2432-H2 32 £7.46THS-2434-H2 34 £7.67THS-2436-H2 36 £7.88THS-2438-H2 38 £8.09THS-2440-H2 40 £8.29


Thread Diameter 2.4mmThread Pitch (A) 1.0mmHexagon Socket (B) 1.5mm 2.0mm on requestHead Diameter (C) 4.0mmDrill Bit for threaded hole 1.8mmDrill bit for gliding hole 2.4mmCore Diameter 1.6mmDrill for this product page 50Tap for this product page 54

Tip Configuration Self tapping, two flute quadrant style

21

A

Length

B CB

www.n2-uk.com

Cortical Bone Screw 2.4mm Self Tapping (Cruciform)Order Code Length RRPCOR-ST-2406-CD 6 £3.80COR-ST-2408-CD 8 £4.00COR-ST-2410-CD 10 £4.20COR-ST-2412-CD 12 £4.40COR-ST-2414-CD 14 £4.60COR-ST-2416-CD 16 £4.81COR-ST-2418-CD 18 £5.01COR-ST-2420-CD 20 £5.21COR-ST-2422-CD 22 £5.41COR-ST-2424-CD 24 £5.62COR-ST-2426-CD 26 £5.82COR-ST-2428-CD 28 £6.02COR-ST-2430-CD 30 £6.22COR-ST-2432-CD 32 £6.43COR-ST-2434-CD 34 £6.63COR-ST-2436-CD 36 £6.83COR-ST-2438-CD 38 £7.02COR-ST-2440-CD 40 £7.22

Cortical (Cortex) Bone Screw Ø2.4mm Criciform



B

A

Length

22

UK manufactured

Cortical Bone Screw 2.4mm Self Tapping (Star Torx Drive) T8Order Code Length RRPCOR-ST-2406-TD 6 £4.33COR-ST-2408-TD 8 £4.53COR-ST-2410-TD 10 £4.73COR-ST-2412-TD 12 £4.92COR-ST-2414-TD 14 £5.12COR-ST-2416-TD 16 £5.33COR-ST-2418-TD 18 £5.53COR-ST-2420-TD 20 £5.73COR-ST-2422-TD 22 £5.93COR-ST-2424-TD 24 £6.14COR-ST-2426-TD 26 £6.34COR-ST-2428-TD 28 £6.54COR-ST-2430-TD 30 £6.74COR-ST-2432-TD 32 £6.95COR-ST-2434-TD 34 £7.15COR-ST-2436-TD 36 £7.35COR-ST-2438-TD 38 £7.55COR-ST-2440-TD 40 £7.75

Cortical Bone Screw Ø2.4mm self tapping (Star Torx Drive)T8Thread Diameter 2.4mmThread Pitch (A) 1.0mmStar Torx Drive Socket (B) T8Head Diameter (C) 4.0mmDrill Bit for threaded hole 1.8mmDrill bit for gliding hole 2.4mmCore Diameter 1.6mmDrill for this product page 50Tap for this product page 54


Length

A

23

CB

www.n2-uk.com

Cortical Bone Screw 2.7mmOrder Code Length RRPCOR-2706 6 £2.91COR-2707 7 £3.10COR-2708 8 £3.28COR-2710 10 £3.46COR-2712 12 £3.65COR-2714 14 £3.83COR-2716 16 £4.02COR-2718 18 £4.21COR-2720 20 £4.39COR-2722 22 £4.58COR-2724 24 £4.77COR-2726 26 £4.96COR-2728 28 £5.13COR-2730 30 £5.32COR-2732 32 £5.51COR-2734 34 £5.69COR-2735 35 £5.88COR-2736 36 £6.07COR-2738 38 £6.25COR-2740 40 £6.44




24

C

A

Length

B

UK manufactured

Cortical Bone Screw 2.7mm Self TappingOrder Code Length RRPCOR-ST-2706 6 £3.07COR-ST-2707 7 £3.26COR-ST-2708 8 £3.44COR-ST-2710 10 £3.62COR-ST-2712 12 £3.81COR-ST-2714 14 £4.00COR-ST-2716 16 £4.18COR-ST-2718 18 £4.37COR-ST-2720 20 £4.56COR-ST-2722 22 £4.75COR-ST-2724 24 £4.92COR-ST-2726 26 £5.11COR-ST-2728 28 £5.30COR-ST-2730 30 £5.48COR-ST-2732 32 £5.67COR-ST-2734 34 £5.86COR-ST-2735 35 £6.04COR-ST-2736 36 £6.23COR-ST-2738 38 £6.42COR-ST-2740 40 £6.59COR-ST-2745 45 £6.78COR-ST-2750 50 £6.97



Tip Configuration Self tapping, three flute quadrant style

25

C

A

Length

B

www.n2-uk.com

Titanium Cortical Bone Screw 2.7mm Self TappingOrder Code Length RRPTHS-2706 6 £6.83THS-2708 8 £6.83THS-2710 10 £6.83THS-2712 12 £6.83THS-2714 14 £6.83THS-2716 16 £6.83THS-2718 18 £6.83THS-2720 20 £6.83THS-2722 22 £7.25THS-2724 24 £7.25THS-2726 26 £7.25THS-2728 28 £7.25THS-2730 30 £7.25THS-2732 32 £7.46THS-2734 34 £7.67THS-2736 36 £7.88THS-2738 38 £8.09THS-2740 40 £8.29




26

C

A

Length

B

UK manufactured

Cortical Bone Screw 2.7mm Self Tapping (Star Torx Drive) T8Order Code Length RRPCOR-ST-2706-TD 6 £3.59COR-ST-2707-TD 7 £3.78COR-ST-2708-TD 8 £3.97COR-ST-2710-TD 10 £4.15COR-ST-2712-TD 12 £4.34COR-ST-2714-TD 14 £4.53COR-ST-2716-TD 16 £4.70COR-ST-2718-TD 18 £4.89COR-ST-2720-TD 20 £5.08COR-ST-2722-TD 22 £5.27COR-ST-2724-TD 24 £5.45COR-ST-2726-TD 26 £5.64COR-ST-2728-TD 28 £5.83COR-ST-2730-TD 30 £6.01COR-ST-2732-TD 32 £6.20COR-ST-2734-TD 34 £6.38COR-ST-2735-TD 35 £6.56COR-ST-2736-TD 36 £6.75COR-ST-2738-TD 38 £6.94COR-ST-2740-TD 40 £7.12

Cortical Bone Screw Ø2.7mm Self Tapping (Star Torx Drive) T8

Thread Diameter 2.7mmThread Pitch (A) 1.0mmStar Torx Drive Socket (B) T8 Head Diameter (C) 5.0mmDrill Bit for threaded hole 2.0mmDrill bit for gliding hole 2.7mmCore Diameter 1.9mmDrill for this product page 50Tap for this product page 54


C

A

Length

27

B

www.n2-uk.com

Cortical Bone Screw 3.5mmOrder Code Length RRPCOR-3508 8 £3.59COR-3510 10 £3.72COR-3512 12 £3.83COR-3514 14 £3.96COR-3516 16 £4.40COR-3518 18 £4.48COR-3520 20 £4.57COR-3522 22 £4.64COR-3524 24 £4.73COR-3526 26 £4.81COR-3528 28 £4.88COR-3530 30 £4.96COR-3532 32 £5.03COR-3534 34 £5.10COR-3535 35 £5.18COR-3536 36 £5.25COR-3538 38 £5.32COR-3540 40 £5.40COR-3542 42 £5.47COR-3544 44 £5.54COR-3545 45 £5.62COR-3546 46 £5.69COR-3548 48 £5.75COR-3550 50 £5.83COR-3555 55 £7.43COR-3560 60 £9.05




28

C

A

Length

B

UK manufactured

Cortical Bone Screw 3.5mm Self TappingOrder Code Length RRPCOR-ST-3508 8 £3.80COR-ST-3510 10 £3.92COR-ST-3512 12 £4.04COR-ST-3514 14 £4.16COR-ST-3516 16 £4.28COR-ST-3518 18 £4.40COR-ST-3520 20 £4.53COR-ST-3522 22 £4.64COR-ST-3524 24 £4.77COR-ST-3526 26 £4.88COR-ST-3528 28 £5.01COR-ST-3530 30 £5.12COR-ST-3532 32 £5.25COR-ST-3534 34 £5.38COR-ST-3535 35 £5.49COR-ST-3536 36 £5.62COR-ST-3538 38 £5.73COR-ST-3540 40 £5.86COR-ST-3542 42 £5.97COR-ST-3544 44 £6.10COR-ST-3545 45 £6.22COR-ST-3546 46 £6.34COR-ST-3548 48 £6.46COR-ST-3550 50 £6.70COR-ST-3555 55 £6.98COR-ST-3560 60 £7.39



GO CO

Tip Configuration Self tapping, three flutes quadrant style

29

C

A

Length

B

www.n2-uk.com

Cortical Bone Screw 3.5mm Self Tapping (Star Torx Drive) T15Order Code Length RRPCOR-ST-3508-TD 8 £4.33COR-ST-3510-TD 10 £4.44COR-ST-3512-TD 12 £4.57COR-ST-3514-TD 14 £4.68COR-ST-3516-TD 16 £4.81COR-ST-3518-TD 18 £4.92COR-ST-3520-TD 20 £5.05COR-ST-3522-TD 22 £5.17COR-ST-3524-TD 24 £5.29COR-ST-3526-TD 26 £5.41COR-ST-3528-TD 28 £5.53COR-ST-3530-TD 30 £5.65COR-ST-3532-TD 32 £5.78COR-ST-3534-TD 34 £5.90COR-ST-3535-TD 35 £6.02COR-ST-3536-TD 36 £6.14COR-ST-3538-TD 38 £6.26COR-ST-3540-TD 40 £6.38COR-ST-3542-TD 42 £6.50COR-ST-3544-TD 44 £6.63COR-ST-3545-TD 45 £6.74COR-ST-3546-TD 46 £6.87COR-ST-3548-TD 48 £6.98COR-ST-3550-TD 50 £7.22COR-ST-3555-TD 55 £7.51COR-ST-3560-TD 60 £7.92

Cortical (Cortex) Bone Screw Ø3.5mm Self Tapping (Star Torx Drive) T8Thread Diameter 3.5mmThread Pitch (A) 1.25mmStar Torx Drive Socket (B) T15Head Diameter (C) 6.0mmDrill Bit for threaded hole 2.5mmDrill bit for gliding hole 3.5mmCore Diameter 2.4mmDrill for this product page 50Tap for this product page 54

GO CO


C

A

Length

B

30

UK manufactured

Titanium Cortical Bone Screw 3.5mm Self TappingOrder Code Length RRPTHS-3510 10 £6.83THS-3512 12 £6.83THS-3514 14 £6.83THS-3516 16 £6.83THS-3518 18 £6.83THS-3520 20 £6.83THS-3522 22 £7.25THS-3524 24 £7.25THS-3526 26 £7.25THS-3528 28 £7.25THS-3530 30 £7.25THS-3532 32 £7.46THS-3534 34 £7.67THS-3536 36 £7.88THS-3538 38 £8.09THS-3540 40 £8.29




31

C

A

Length

B

www.n2-uk.com

Cortical Bone Screw 4.5mmOrder Code Length RRPCOR-4516 16 £4.51COR-4518 18 £4.57COR-4520 20 £4.63COR-4522 22 £4.68COR-4524 24 £4.75COR-4525 25 £4.80COR-4526 26 £4.85COR-4528 28 £4.91COR-4530 30 £4.97COR-4532 32 £5.02COR-4534 34 £5.08COR-4535 35 £5.13COR-4536 36 £5.20COR-4538 38 £5.25COR-4540 40 £5.30COR-4542 42 £5.37COR-4544 44 £5.42COR-4545 45 £5.48COR-4546 46 £5.53COR-4548 48 £5.59COR-4550 50 £5.65COR-4552 52 £5.70COR-4554 54 £5.75COR-4556 56 £5.82COR-4558 58 £5.87COR-4560 60 £5.93COR-4562 62 £5.99COR-4564 64 £6.04COR-4565 65 £6.10COR-4566 66 £6.15COR-4568 68 £6.28COR-4570 70 £6.43




C

A

Length

B

32

UK manufactured

Cortical Bone Screw 4.5mm Self TappingOrder Code Length RRPCOR-ST-4512 12 £4.81COR-ST-4514 14 £4.87COR-ST-4516 16 £4.94COR-ST-4518 18 £5.00COR-ST-4520 20 £5.06COR-ST-4522 22 £5.12COR-ST-4524 24 £5.20COR-ST-4525 25 £5.26COR-ST-4526 26 £5.32COR-ST-4528 28 £5.39COR-ST-4530 30 £5.45COR-ST-4532 32 £5.51COR-ST-4534 34 £5.59COR-ST-4535 35 £5.65COR-ST-4536 36 £5.71COR-ST-4538 38 £5.78COR-ST-4540 40 £5.84COR-ST-4542 42 £5.90COR-ST-4544 44 £5.96COR-ST-4545 45 £6.04COR-ST-4546 46 £6.10COR-ST-4548 48 £6.16COR-ST-4550 50 £6.23COR-ST-4552 52 £6.29COR-ST-4554 54 £6.35COR-ST-4556 56 £6.43COR-ST-4558 58 £6.49COR-ST-4560 60 £6.59COR-ST-4562 62 £6.74COR-ST-4564 64 £6.90COR-ST-4565 65 £6.96COR-ST-4566 66 £7.05COR-ST-4568 68 £7.19COR-ST-4570 70 £7.33




C

A

Length

B

33

www.n2-uk.com

Titanium Cortical Bone Screw 4.5mm Self TappingOrder Code Length RRPTHS-4512 12 £8.89THS-4514 14 £9.01THS-4516 16 £9.13THS-4518 18 £9.25THS-4520 20 £9.37THS-4522 22 £9.49THS-4524 24 £9.61THS-4525 25 £9.72THS-4526 26 £9.85THS-4528 28 £9.96THS-4530 30 £10.09THS-4532 32 £10.21THS-4534 34 £10.32THS-4535 35 £10.45THS-4536 36 £10.56THS-4538 38 £10.69THS-4540 40 £10.80THS-4542 42 £10.92THS-4544 44 £11.05THS-4545 45 £11.16THS-4546 46 £11.28THS-4548 48 £11.40THS-4550 50 £11.52




C

A

Length

B

34

UK manufactured

Cortical Shaft Screw 4.5mm (Lag Screw)Order Code Length RRPCSS-4526 26 £9.06CSS-4528 28 £9.06CSS-4530 30 £9.06CSS-4532 32 £9.06CSS-4534 34 £9.85CSS-4536 36 £9.85CSS-4538 38 £9.85CSS-4540 40 £9.85CSS-4542 42 £10.63CSS-4544 44 £10.63CSS-4546 46 £10.63CSS-4548 48 £10.63CSS-4550 50 £10.63


C

A

Length

B



35

www.n2-uk.com

Cortical Bone Screw 5.5mmOrder Code Length RRPCOR-5524 24 £7.33COR-5526 26 £7.59COR-5528 28 £7.85COR-5530 30 £8.11COR-5532 32 £8.37COR-5534 34 £8.63COR-5536 36 £8.88COR-5538 38 £9.15COR-5540 40 £9.41COR-5542 42 £9.67COR-5544 44 £9.92COR-5546 46 £10.19COR-5548 48 £10.45COR-5550 50 £10.70COR-5552 52 £10.96COR-5554 54 £11.22COR-5556 56 £11.49COR-5560 60 £12.00


C

A

Length

B

Cortical (Cortex) Shaft Screw Ø5.5mm Hexagonal


36

UK manufactured

Cortical Bone Screw 5.5mm Self TappingOrder Code Length RRPCOR-ST-5524 24 £7.75COR-ST-5526 26 £8.01COR-ST-5528 28 £8.27COR-ST-5530 30 £8.53COR-ST-5532 32 £8.79COR-ST-5534 34 £9.05COR-ST-5536 36 £9.30COR-ST-5538 38 £9.57COR-ST-5540 40 £9.83COR-ST-5542 42 £10.09COR-ST-5544 44 £10.34COR-ST-5546 46 £10.61COR-ST-5548 48 £10.87COR-ST-5550 50 £11.12COR-ST-5552 52 £11.38COR-ST-5554 54 £11.64COR-ST-5556 56 £11.91COR-ST-5560 60 £12.42


Cortical (Cortex) Shaft Screw Ø5.5mm Hexagonal


C

A

Length

B

37

www.n2-uk.com

Tip Configuration Spiral Tip.

Cancellous Bone Screw 2.2mm Full Thread Self Tapping (spiral point) Order Code Length RRPCAN-FT-2208 8 £3.80CAN-FT-2210 10 £3.90CAN-FT-2212 12 £3.99CAN-FT-2214 14 £4.08CAN-FT-2216 16 £4.18CAN-FT-2218 18 £4.28CAN-FT-2220 20 £4.38CAN-FT-2222 22 £4.47CAN-FT-2224 24 £4.57

C

A

Length

B

Cancellous Bone Screw Ø2.2mm Hexagonal

Thread Diameter 2.2mmThread Pitch (A) 1.0mmHexagon Socket (B) 1.5mmHead Diameter (C) 4.0mmDrill Pilot 1.5mmCore Diameter 1.4mmDrill for this product page 50Tap for this product page 54

38

UK manufactured

Cancellous Bone Screw 3.0mm Full Thread Self Tapping (spiral point) Order Code Length RRPCAN-FT-3012 12 £4.00CAN-FT-3014 14 £4.12CAN-FT-3016 16 £4.24CAN-FT-3018 18 £4.36CAN-FT-3020 20 £4.48CAN-FT-3022 22 £4.60CAN-FT-3024 24 £4.73CAN-FT-3026 26 £4.85CAN-FT-3028 28 £4.97CAN-FT-3030 30 £5.09CAN-FT-3032 32 £5.21CAN-FT-3034 34 £5.33CAN-FT-3036 36 £5.45


C

A

Length

B



39

www.n2-uk.com

Cancellous Bone Screw 3.5mm Full Thread (round end)Order Code Length RRPCAN-FT-3510 10 £3.80CAN-FT-3512 12 £3.96CAN-FT-3514 14 £4.12CAN-FT-3516 16 £4.28CAN-FT-3518 18 £4.44CAN-FT-3520 20 £4.60CAN-FT-3522 22 £4.77CAN-FT-3524 24 £4.92CAN-FT-3526 26 £5.09CAN-FT-3528 28 £5.25CAN-FT-3530 30 £5.41CAN-FT-3532 32 £5.58CAN-FT-3534 34 £5.73CAN-FT-3536 36 £5.90CAN-FT-3538 38 £6.06CAN-FT-3540 40 £6.22CAN-FT-3542 42 £6.38CAN-FT-3544 44 £6.54CAN-FT-3545 45 £6.70CAN-FT-3546 46 £6.87CAN-FT-3548 48 £7.02CAN-FT-3550 50 £7.19CAN-FT-3555 55 £7.35CAN-FT-3560 60 £7.51




C

A

Length

B

40

UK manufactured

Cancellous Bone Screw 4.0mm Full Thread Self Tapping (spiral point) Order Code Length RRPCAN-FT-4010 10 £3.80CAN-FT-4011 11 £3.97CAN-FT-4012 12 £4.15CAN-FT-4014 14 £4.33CAN-FT-4016 16 £4.50CAN-FT-4018 18 £4.68CAN-FT-4020 20 £4.86CAN-FT-4022 22 £5.04CAN-FT-4024 24 £5.22CAN-FT-4026 26 £5.40CAN-FT-4028 28 £5.58CAN-FT-4030 30 £5.75CAN-FT-4032 32 £5.93CAN-FT-4034 34 £6.11CAN-FT-4035 35 £6.28CAN-FT-4036 36 £6.46CAN-FT-4038 38 £6.64CAN-FT-4040 40 £6.81CAN-FT-4045 45 £6.99CAN-FT-4050 50 £7.17CAN-FT-4055 55 £7.35CAN-FT-4060 60 £7.53


Thread Diameter 4.0mmThread Pitch (A) 1.75mmHexagon Socket: (B) 2.5mmHead Diameter (C) 6.0mmDrill Bit for threaded hole 2.0mmCore Diameter 1.9mmDrill for this product page 50Tap for this product page 54


C

A

Length

B

41

www.n2-uk.com

Cancellous Bone Screw 4.0mm Part Thread Self Tapping (spiral point)

Order Code LengthThread Length RRP

CAN-PT-4010 10 5mm £3.80CAN-PT-4012 12 5mm £3.94CAN-PT-4014 14 5mm £4.07CAN-PT-4016 16 6mm £4.21CAN-PT-4018 18 7mm £4.35CAN-PT-4020 20 8mm £4.48CAN-PT-4022 22 9mm £4.62CAN-PT-4024 24 10mm £4.76CAN-PT-4026 26 12mm £4.89CAN-PT-4028 28 14mm £5.03CAN-PT-4030 30 14mm £5.17CAN-PT-4032 32 14mm £5.30CAN-PT-4034 34 14mm £5.38CAN-PT-4035 35 14mm £5.41CAN-PT-4036 36 14mm £5.49CAN-PT-4040 40 14mm £5.82CAN-PT-4042 42 15mm £5.95CAN-PT-4044 44 15mm £6.09CAN-PT-4045 45 15mm £6.22


Thread Diameter 4.0mmThread Pitch (A) 1.75mmHexagon Socket: (B) 2.5mmHead Diameter (C) 6.0mmDrill Bit for threaded hole 2.0mmCore Diameter 1.9mmDrill for this product page 50Tap for this product page 54


42

C

A

Length

B

UK manufactured

Sherman Screw 2.0mm HC ThreadOrder Code Length RRPSH-2006 6 £2.91SH-2008 8 £3.07SH-2010 10 £3.23SH-2012 12 £3.39SH-2014 14 £3.55SH-2016 16 £3.72SH-2018 18 £3.87SH-2020 20 £4.04SH-2022 22 £4.20SH-2024 24 £4.36SH-2026 26 £4.53SH-2028 28 £4.68SH-2030 30 £4.85

Sherman Screw 2.7mm (2.9mm actual) HC ThreadOrder Code Length RRPSH-2710 10mm 3/8" £2.43SH-2713 13mm 1/2" £2.58SH-2716 16mm 5/8" £2.75SH-2719 19mm 3/4" £2.91SH-2722 22mm 7/8" £3.07SH-2725 25mm 1" £3.23SH-2728 28mm 1 1/8" £3.39SH-2731 31mm 1 1/4" £3.55SH-2734 34mm 1 3/8" £3.72SH-2738 38mm 1 1/2" £3.87SH-2741 41mm 1 5/8" £4.04SH-2744 44mm 1 3/4" £4.20SH-2748 48mm 1 7/8" £4.36SH-2750 50mm 2" £4.53SH-2757 57mm 2 1/4" £4.68

Sherman Screw Ø2.7mm (Ø2.9mm actual)Thread Diameter 2.7(Actual 2.9)mmThread Pitch (A) 1.06mmHead Diameter (B) 5.9mmDrill Bit for threaded hole 2.2mmCore Diameter 2.1mmCruciate Recess Drive


43

Sherman Screw Ø2.0mmThread Diameter 2.0mmThread Pitch (A) 0.8mmHead Diameter (B) 4.0mmDrill Bit for threaded hole 1.6mmCore Diameter 1.5mmSingle Slot Recess Drive


Length

BA

Length

BA

www.n2-uk.com

Sherman Screw 3.5mm HC ThreadOrder Code Length RRPSH-3510 10mm 3/8" £2.43SH-3513 13mm 1/2" £2.58SH-3516 16mm 5/8" £2.75SH-3519 19mm 3/4" £2.91SH-3522 22mm 7/8" £3.07SH-3525 25mm 1" £3.23SH-3528 28mm 1 1/8" £3.39SH-3531 31mm 1 1/4" £3.55SH-3534 34mm 1 3/8" £3.72SH-3538 38mm 1 1/2" £3.87SH-3541 41mm 1 5/8" £4.04SH-3544 44mm 1 3/4" £4.20SH-3548 48mm 1 7/8" £4.36SH-3550 50mm 2" £4.53SH-3557 57mm 2 1/4" £4.68SH-3564 64mm 2 1/2" £4.85

Headless Compression Lag ScrewsSelf-drilling and self-tapping screws for small bones/ fractures where plate placement is not possible.

The head is designed to screw in flush in the bone creating a lag effect and minimising tissue irritation.

Requires 1.0mm screwdriver for the 1.5mm screws and 1.5mm screwdriver for the 2.0 and 2.7mm ranges

Order Code Description Length RRPHCL-15-L 1.5mm - Large 10mm £11.50HCL-15-M 1.5mm - Medium 15mm £11.50HCL-15-S 1.5mm - Small 20mm £11.50



Sherman Screw Ø3.5mmThread Diameter 3.5mmThread Pitch (A) 1.27mmHead Diameter (B) 6.0mmDrill Bit for threaded hole 2.7mmCore Diameter 2.6mmCruciate Recess Drive


B

A

Length

44

UK manufactured

B

4.5mm IOHC (Incomplete ossification of the humeral condyle)Order Code Length RRPIOHC-45-28 28 £31.50IOHC-45-30 30 £31.50IOHC-45-32 32 £31.50IOHC-45-34 34 £31.50IOHC-45-36 36 £31.50IOHC-45-38 38 £31.50IOHC-45-40 40 £31.50

This specialist screw was developed over the last two years to address the sometimes awkward procedure of Incomplete Ossification of the Humeral Condyle. Made from Extra Hard Implant Material (Commonly used for Arthrodesis Wires +40% than standard Shaft Bone Screws). Retains shape and wear resistant. Dual Hex Drive. Main Drive is 3mm Hex with an emergency 1.5mm Hex Drive for recovery on opposite end. Offering Compression with cutting action flutes. The thread form is a modified HC (Locking Screw) from Human Ankle surgery.This screw greatly reduces previous complications of micro fractures, screw fatigue failure and reliability.

Thread Diameter (Main) 4.5mmThread Pitch 1.25mmDrill Bit 3.2Tap IOHC 4.5 SpecialCore Diameter 3.2mmHexagonal Slot 3mmRetrieval Hex 1.5mm

We offer two choices of screw, 4.5mm IOHC compression and a positional 4.5mm Shaft screw. The Shaft screw was first manufactured by us in 2006 and has an extended thread length to a standard screw.

IOHC Cortical Shaft Screw 4.5mmOrder Code

Screw Size Thread RRP

CSS-4528 28 13mm £13.65CSS-4530 30 13mm £13.65CSS-4532 32 13mm £13.65CSS-4534 34 13mm £13.65CSS-4536 36 13mm £13.65CSS-4538 38 13mm £13.65CSS-4540 40 13mm £13.65

A

Length

45

CB

www.n2-uk.com

Suture Anchor Screws (Self Tapping)Order Code Thread Form Eyelet Ø Length RRPSA-2006 2.0mm Cortical (HA) 1.5mm 6 £14.70SA-2010 2.0mm Cortical (HA) 1.5mm 10 £14.70SA-2708 2.7mm Cortical (HA) 1.5mm 8 £14.70SA-2714 2.7mm Cortical (HA) 1.5mm 14 £14.70SA-3512 3.5mm Cortical (HA) 2.0mm 12 £14.70SA-3520 3.5mm Cortical (HA) 2.0mm 20 £14.70SA-4016 4.0mm Cancellous (HB) 2.0mm 16 £14.70SA-4024 4.0mm Cancellous (HB) 2.0mm 24 £14.70

SA-40XX

SA-35XX

SA-27XX

SA-20XX

SA-2010 SA-2714 SA-3512 SA-4024

Suture Pins (Snap-Off)Order Code Diameter Overal Length Screw Length Hole Ø Pilot Drill RRPSSP-27 2.7mm 125mm 14.5mm 1.5 2.0 £13.00SSP-35 3.5mm 125mm 18mm 1.5 2.5 £13.50SSP-40 4.0mm 135mm 24mm 2.1 2.7 £14.50

SSP27

SSP35

SSP40

46

Drill bits, Screwdrivers and Taps

47

EVODURANCE® Drill BitsOrthopaedic bone drills, can they be improved?The simple answer is YES. Please read on to find out more.

Many orthopaedic operations involve drilling before the insertion of screws into bone. It is known that a rise in temperature above 43°C around a drill hole will cause Thermal Bone Necrosis, with irreversible changes in the structure and physical properties of bone. The immediate effect on the physical structure and the later effect on the cellular components both prejudice the hold of the screw as necrotic bone is reabsorbed, reducing the stability and strength of the fixation. Also the presence of necrotic tissue may delay healing and be predisposed to infection.

So what can generate this unwanted heat?1. Blunt drill bits will generate higher temperatures and the increased force required for

penetration causes poor control of the drill, and uncontrolled bursting through the far cortex. As drill bit material must be stainless steel, most orthopaedic drills are made from the most common surgical category grade of 420 which has a maximum hardness of 53Rc so standard drills are prone to early wear and blunting. Evodurance® Drill Bits (EDB) uses material grade 440C with a hardness of 57Rc and are TiCN Coated (see below)

2. Blocked Flutes: The physical characteristics of bone vary considerably with its state. When drilled dry, it produces debris in small particles that are easily cleared by a drill bit and the optimal helix angle for the flute is a slow helix (less turns per revolution) which most standard orthopaedic drill bits have. However at the site of operation, the debris is wet and mixed with medullary fat and bio-fluids. In this state, bone debris is no longer in the form of small particles and the flutes of a slow helix drill will clog easily and generate excessive heat. Evodurance® Drill Bits (EDB) have a quick helix in the form of a parabolic flute. See fig 1

3. Standard drill points require more force to penetrate the bone because the contact surface area is larger, generating more friction, and the cutting edge does not run across the central section. A split point will generate less heat at the tip. Most standard orthopaedics drills do not have the split point. Evodurance® Drill Bits (EDB) have a Split Point. See fig 2

4. Tip angle is not as critical to heat generation However if the angles are too sharp, they can cause soft tissue trauma when bursting through the far cortex. Also a more pointed tip will blunt more quickly. Evodurance® Drill Bits (EDB) have a 100ᴼ point angle.

Why coat drill bits?Medical grade stainless steel has a co-efficient of friction of 0.8 and a hardness of 53Rc. This can be reduced to 0.45 and hardness increased to 87Rc by PVD coating with biocompatible TiCN resulting in further reduced friction generated heat and drastically improving tool life.At N2 UK Ltd we believe we are the first veterinary manufacturer to invest resources in the improvement of bone drills. Literature study suggests that the optimal bone drill geometry will be a 100°split point to reduce friction, and that a quick parabolic helix is needed to clear the bone debris efficiently. Such a drill bit would be more efficient, generate minimal friction and reduce the production of thermal energy. We are pleased to say that this style of drill is now available from our Evodurance® Drill Bit range and fully manufactured in UK.

Parabolic Flute Quick Helix

Slow Helix Standard drill point

Split drill point

Fig 1 Fig 2 Cutting Edge shown in Red

UK manufactured

49

Evodurance® Drill Bits with AO Style Quick ReleaseOrder Code Diameter Overall

LengthWorking Length

Flute Length RRP

EDB-QR-11-060 1.1 85 60 20 £40.00EDB-QR-11-080 1.1 105 80 25 £40.00EDB-QR-15-060 1.5 85 60 30 £40.00EDB-QR-15-080 1.5 105 80 30 £40.00EDB-QR-18-080 1.8 105 80 40 £40.00EDB-QR-18-110 1.8 135 110 40 £40.00EDB-QR-20-080 2.0 105 80 40 £40.00EDB-QR-20-110 2.0 135 110 40 £40.00EDB-QR-25-100 2.5 125 100 50 £40.00EDB-QR-25-150 2.5 175 150 50 £40.00EDB-QR-27-100 2.7 125 100 50 £40.00EDB-QR-27-150 2.7 175 150 50 £40.00EDB-QR-28-150 2.8 175 150 50 £40.00EDB-QR-32-170 3.2 195 170 50 £40.00

Evodurance® Drill Bits with Straight ShankOrder Code Diameter Overall

LengthFlute

Length RRP

EDB-11-055 1.1 55 20 £30.00EDB-11-080 1.1 80 25 £30.00EDB-15-060 1.5 60 30 £30.00EDB-15-080 1.5 80 30 £30.00EDB-18-080 1.8 80 40 £30.00EDB-18-110 1.8 110 40 £30.00EDB-20-080 2.0 80 40 £30.00EDB-20-110 2.0 110 40 £30.00EDB-25-100 2.5 100 50 £30.00EDB-25-150 2.5 150 50 £30.00EDB-27-100 2.7 100 50 £30.00EDB-27-150 2.7 150 50 £30.00

ReferencesAndrianne Y, Wagenknecht M, Donkerwolcke M, Zurbuchen C, BurnyF. External fixation pin: an in vitro general investigation. Orthopedics 1987;10:1507-16.Ardan NL, James JM, Herrick JF. Ultrasonic energy and surgically produced defects in bone. J Bone Joint Surg [Am] 1957;39-A:394-402.Bonfield W, Li CH. The temperature dependence of the deformation of bone. J Biomechanics 1968;1:323-9.Fuchsberger A. Optimization of the spiral drill for use in medicine. Z Orthop1987;125:290-7.Matthews LS, Green CA, Goldstein SA. The thermal effects of skeletal fixation-pin insertion in bone. J Bone Joint Surg [Am] 1984;66-A: 1077-83.Matthews LS, Hirsch C. Temperatures measured in human cortical bone when drilling. J Bone Joint Surg [Am] 1972;54-A:297-308.Saha S, Pal S, Albright JA. Surgical drilling: design and performance of an improved drill. J Biomech Eng 1982;104:245-52.Sidak Z. Rectangular confidence regions for the means of multivariant normal distributions. J Am Stat Assoc 1967;62:626-33.

Designed and manufactured

in the UK

To compliment our Evodurance Drills we have revised our economy drill range. The sizes have been amended based on customer feedback and the hardened drills are even better value.

Order Code Diameter Total Length Flute Length RRPDRL-11-060 1.1 60 25 £13.00DRL-11-080 1.1 80 25 £13.00DRL-15-060 1.5 60 30 £13.00DRL-15-080 1.5 80 30 £13.00DRL-18-080 1.8 80 40 £13.00DRL-18-110 1.8 110 40 £13.00DRL-20-080 2.0 80 40 £13.00DRL-20-110 2.0 110 40 £13.00DRL-25-100 2.5 100 50 £13.00DRL-25-150 2.5 150 50 £13.00DRL-27-100 2.7 100 50 £13.00DRL-27-150 2.7 150 50 £13.00DRL-32-170 3.2 170 60 £13.00DRL-35-170 3.5 170 60 £13.00DRL-40-170 4.0 170 60 £13.00DRL-45-170 4.5 170 60 £13.00

Order Code Diameter Total Length Flute Length RRPDRL-QR-11-060 1.1 85 25 £17.00DRL-QR-11-080 1.1 105 25 £17.00DRL-QR-15-060 1.5 85 25 £17.00DRL-QR-15-080 1.5 105 30 £17.00DRL-QR-18-080 1.8 105 40 £17.00DRL-QR-18-110 1.8 135 40 £17.00DRL-QR-20-080 2.0 115 40 £17.00DRL-QR-20-105 2.0 130 40 £17.00DRL-QR-24-100 2.4 125 50 £17.00DRL-QR-25-100 2.5 125 40 £17.00DRL-QR-27-100 2.7 125 40 £17.00DRL-QR-27-150 2.7 175 40 £17.00DRL-QR-32-170 3.2 195 60 £17.00DRL-QR-35-170 3.5 195 60 £17.00DRL-QR-40-170 4.0 195 60 £17.00DRL-QR-45-170 4.5 195 60 £17.00

50

UK manufactured

Drill Bit - Anti SkidStandard tipped drills can slip or skid when making the initial entry into the bone especially when the angle differs from 90 degrees. Anti skid drills have a very sharp point on the end which bites into the bone and holds the drill in place, ensuring the hole is exactly where you need it

Order Code Diameter Flute Length RRPDRL-AS-15-R 1.5 60 £22.00DRL-AS-18-R 1.8 80 £22.00DRL-AS-20-R 2.0 100 £23.00DRL-AS-24-R 2.5 115 £23.00DRL-AS-25-R 2.5 115 £23.00DRL-AS-27-R 2.7 130 £24.00DRL-AS-32-R 3.2 130 £24.00DRL-AS-35-R 3.5 130 £25.00

Drill Bit - CannulatedFor drilling over A-wires when drill hole angle and site are critical

Order Code Description RRPDRL-CAN-25 Drill Bit 2.5mm with 1.1mm Cannulation

95mm Long£58.00

DRL-CAN-35 Drill Bit 3.5mm with 1.1mm Cannulation 90mm Long

£58.00

Drill StopsComprises four stoppers in an autoclaveable case simply choose the nearest stopper to your drill bit and lock it off at the required drill depth

Order Code Description RRPDR-ST-SET Drill Stop Set in stainless steel case, for drill

sizes 2.0,2.5,2.7,3.2,3.5,4.5£80.00

51

HandlesOrder Code Description RRPSGH-DF Premium Quality Comfort Silicon Handle Dental Fit £107.00SGH-QF Premium Quality Comfort Silicon Handle AO Quick Fit £107.00STH-QF Premium Quality Comfort Silicon Handle T Bar AO Quick Fit £95.00

STH-QF

SGH-DF

SGH-QF

Premium Screwdrivers Screwdriver and screwdriver tips are critical to how your plating kits work and can be the weak point in your system. A small amount of wear in the tip can result in damage to the screw heads, usually at the most inappropriate time mid procedure.N2 torx tips are not only designed to tight specifications on the tip tolerances they are also coated to make them harder and increases resistance to wear.

Order Code Description RRPSDT-QR-T6 T6 Premium Screwdriver Tip for 2.0mm Torx Head Screws £100.00SDT-QR-T8 T8 Premium Screwdriver Tip for 2.4/2.7mm Torx Head Screws £100.00SDT-QR-T15 T15 Premium Screwdriver Tip for 3.5mm Torx Head Screws £100.00

*coming soon our hex drive tips will also be coated for extra longevity.

Torx Screw holding sleevesOrder Code Description RRPSHS-T6 Screw Holding Sleeve for T6 Screwdriver and Premium tips £12.00SHS-T8 Screw Holding Sleeve for T8 Screwdriver and Premium tips £12.00SHS-T15 Screw Holding Sleeve for T15 Screwdriver and Premium tips £12.00

Knurled easy grip point

52

UK manufactured

Screwdriver Standard Screwdrivers for Hex Head screws

Order Code Description RRPSD-H15 Screwdriver for 1.5mm, 2.0mm and 2.4mm

Hex Screws with Sleeve£32.00

SD-H20 Screwdriver for 2.4mm screws with 2mm Hex Screws with Sleeve

£32.00

SD-H25 Screwdriver for 2.7mm, 3.5mm and 4.0mm Hex Screws with Sleeve

£32.00

SD-H35 Screwdriver for 4.5mm, 5.5mm and 6.5mm Hex Screws with Sleeve

£32.00

Hardened Tipped Screwdrivers for torx screws

Order Code Description RRPSD-TD-T6 Screwdriver for 2.0mm

Star Torx Drive Locking Screws£42.00

SD-TD-T8 Screwdriver for 2.4mm/2.7mm Star Torx Drive Locking Screws

£42.00

SD-TD-T15 Screwdriver for 3.5mm Star Torx Drive Locking Screws

£42.00

2.4mm cross head screwdriver for TCS-24 screws

Order Code Description RRPSD-C24 Screwdriver 2.4mm Cross-Head

(2.4mm titanium screws)£37.00

Sherman screwdrivers

Order Code Description RRPSD-F20-L17 Screwdriver Flat Head 2.0mm

Length 175mm £18.00

SD-F27-L17 Screwdriver Flat Head 2.7mm Length 175mm

£18.00

SD-F35-L17 Screwdriver Flat Head 3.5mm Length 175mm

£18.00

SD-C35-L25 Screwdriver Cross Head 3.5mm Length 250mm

£18.00

Mini Screwdriver Uses thumb and forefinger control rather than your wrist for more precise control on the smaller screws

Order Code Description RRPSD-100-H Knurled One Piece Stainless Steel Driver

with 1mm Hex£27.00

SD-150-H Knurled One Piece Stainless Steel Driver with 1.5mm Hex

£27.00

53

Taps Square ended to fit a standard adjustable tap wrench

Material Stainless Steel 420 AnealedOrder Code Description RRPTAP-HA15 1.5mm Cortical Tap £27.00TAP-HA20 2.0mm Cortical Tap £27.00TAP-HA24 2.4mm Cortical tap £27.00TAP-HA27 2.7mm Cortical tap £27.00TAP-HA35 3.5mm Cortical tap £27.00TAP-HA45 4.5mm Cortical tap £27.00TAP-HA55 5.5mm Cortical tap £27.00TAP-HC24 2.4mm Locking screw tap £34.00TAP-HC27 2.7mm Locking screw tap £34.00TAP-HC35 3.5mm Locking screw tap £34.00TAP-HB-35 3.5mm Cancellous screw tap £34.00TAP-HB-40 3.5mm Cancellous screw tap £34.00TAP-HB-65 3.5mm Cancellous screw tap £36.00

Taps AO Quick Release Material Stainless Steel 420 Hardened to 53HRCOrder Code Description RRPTAP-QRD-15 1.5mm Cortical Tap with Dental quick fit £46.00TAP-QRD-20 2.0mm Cortical Tap with Dental quick fit £46.00TAP-QR-24 2.4mm Cortical tap with AO quick fit £46.00TAP-QR-27 2.7mm Cortical tap with AO quick fit £46.00TAP-QR-35 3.5mm Cortical tap with AO quick fit £46.00TAP-QR-45 4.5mm Cortical tap with AO quick fit £46.00TAP-QR-45L 4.5mm Cortical tap extra long with AO quick fit £46.00TAP-QR-55 5.5mm Cortical tap with AO quick fit £46.00TAP-QR-LOC-24 2.4mm Locking screw tap with AO quick fit £56.00TAP-QR-LOC-27 2.7mm Locking screw tap with AO quick fit £56.00TAP-QR-LOC-35 3.5mm Locking screw tap with AO quick fit £56.00TAP-QR-HB-35 3.5mm Cancellous screw tap with AO quick fit £56.00TAP-QR-HB-40 4.0mm Cancellous screw tap with AO quick fit £56.00TAP-QR-HB-65 6.5mm Cancellous screw tap with AO quick fit £58.00

Screw Driver Tip - AO Quick Release Material Stainless Steel 420 Hardened to 53HRCOrder Code Fits Screw sizes RRPSDT-QR-15 1.5mm Hex Drive £30.00SDT-QR-25 2.5mm Hex Drive £30.00SDT-QR-35 3.5mm Hex Drive £30.00SDT-QR-20 2.0mm Hex Drive £46.00SDT-QR-45 4.5mm Hex Drive IOHC £60.00SDT-QR-C24 £30.00

54

UK manufactured

SDT-QR-C24

Screw Driver Tip - AO Quick Release

TAP-QR-L-35

TAP-QR-L-27

TAP-QR-L-24

TAP-QR-55

TAP-QR-45L

TAP-QR-45

TAP-QR-35

TAP-QR-27

TAP-QR-24

Taps AO Quick Release

TAP-QRD-20

TAP-QRD-15

Taps Dental Fit

SDT-QR-15

SDT-QR-25

SDT-QR-35

55

57

Wires and Pins

www.n2-uk.com

Page

Kirschner Wires (K-wires), Steinmann Pins, Denham pins and guide wires 59

Steinman Intra-Medullary Pin Trocar Tips 60

Steinman Intra-Medullary Pin Threaded Trocar / Plain Trocar Tips 60

Kirschner Wire (Trocar both ends) 61

Kirschner Wire (Bayonet / Round) 61

Fully Threaded Kirschner Wires Trocar / Trocar 62

2.0mm Fine Threaded Fragment Pins 62

Negative Threaded Pins Cortical End Thread 62

Negative Threaded Ellis Pins Short Fine End Thread 63

Positive Threaded Pins Cortical End Thread 63

Positive Threaded Pins Cortical Mid Thread 64

Positive Threaded Pins Cancellous End Thread 64

Positive Threaded Pins Cancellous Mid Thread 64

58

UK manufactured

Wire Diameters Ø Available 0.80mm0.90mm1.00mm1.10mm1.20mm1.25mm1.40mm1.50mm1.60mm1.80mm2.00mm2.20mm2.40mm2.50mm2.80mm3.00mm3.18mm3.50mm4.00mm4.50mm5.00mm6.00mm6.35mm8.00mm

Kirschner Wires (K-wires), Steinmann Pins, Denham pins and guide wires

Variables on end type Code Comments

Trocar (Trochar) T 3 Faceted triangular point

Bayonet B Spade drill style point

Round R Blunt round end

Dome D Blunt domed end

Triangle A 3 Faced tri-drive

Square Q 4 Faced square-drive

Drill Point P Short 4 facet drill point

Eyelet E Eyelet (suture loop)

Variables on end type Code Comments

Fully Threaded PFT Thread runs full length of wire

Front End Threaded Short PST 5-10mm of front end thread

Front End Threaded Long PLT 15-30mm of front end thread

No Thread PIN Parallel shaft with no thread

Positive Mid Thread (Denham

Pin)PMT Threaded mid section

diameter larger than pin shaft

Positive End Thread PET Threaded end section

diameter larger than pin shaft

Order Code explained

PIN 160 — 300 — TT

Diameter 1.6

Length 300

Tip Configuation Trocar/Trocar

Kirschner WiresUnthreaded Kirschner Wires are supplied in several formats, Trocar point in which the tip is sharpened to a 3 facet point, Bayonet point which provides a spade drill for improved cutting, Triangular end to allow greater grip in the jaws of the drill, and Round end, plain finished with domed tip. Threaded, trocar pointed wires are also available for use as guide wires.

Steinmann PinsUsed in skeletal traction for alignment and reduction of fractures, and with certain external fixation systems. Steinmann Pins are supplied either with a three facet trocar point or ‘spade drill type’ bayonet point. The ends of the pins are available either triangular or round.

MaterialMaterial for sizes up to Ø5.00mm = Stainless Steel ISO5832-1 XH (extra high) = 1400 N/mm2Material for sizes over Ø5.00mm = Stainless Steel ISO5832-1 HI (high) = 1100 N/mm2

59

www.n2-uk.com

Steinman Intra-Medullary Pin Trocar TipsOrder Code

Pin Diameter Length RRP

PIN-160-300-TT 1.60 300 £5.00PIN-200-300-TT 2.00 300 £5.00PIN-240-300-TT 2.40 300 £5.00PIN-280-300-TT 2.80 300 £5.00PIN-320-300-TT 3.20 300 £5.00PIN-360-300-TT 3.60 300 £7.00PIN-400-300-TT 4.00 300 £7.00PIN-480-300-TT 4.80 300 £7.00PIN-635-300-TT 6.35 300 £10.00PIN-800-300-TT 8.00 300 £10.00PIN-560-300-TT 5.60 300 £10.00

Steinman Intra-Medullary Pin Threaded Trocar / Plain Trocar TipsOrder Code

Pin Diameter

Length/Thread RRP

PLT-160-300-TT 1.60 300 / 30 £4.68PLT-200-300-TT 2.00 300 / 30 £4.85PLT-240-300-TT 2.40 300 / 30 £5.01PLT-280-300-TT 2.80 300 / 30 £5.17PLT-320-300-TT 3.20 300 / 30 £5.33PLT-360-300-TT 3.60 300 / 30 £5.82PLT-400-300-TT 4.00 300 / 30 £6.63PLT-480-300-TT 4.80 300 / 30 £8.24PLT-635-300-TT 6.35 300 / 30 £9.05PLT-800-300-TT 8.00 300 / 30 £9.71PLT-560-300-TT 5.60 300 / 30 £9.71

60

UK manufactured

Kirschner Wire (Trocar both ends)Sold in packs of 10

Order CodePin

Diameter Length RRPPIN-080-125-TT 0.80 125 £18.60PIN-090-125-TT 0.90 125 £18.60PIN-100-125-TT 1.00 125 £18.60PIN-110-125-TT 1.10 125 £18.60PIN-125-125-TT 1.25 125 £18.60PIN-140-125-TT 1.40 125 £18.60PIN-150-125-TT 1.50 125 £18.60PIN-160-125-TT 1.60 125 £18.60PIN-180-125-TT 1.80 125 £18.60PIN-200-125-TT 2.00 125 £18.60

Kirschner Wire (Bayonet / Round)Sold in packs of 10

Order CodePin

Diameter Length RRPPIN-090-125-BR 0.90 125 £20.15PIN-100-125-BR 1.00 125 £20.15PIN-110-125-BR 1.10 125 £20.15PIN-125-125-BR 1.25 125 £20.15PIN-140-125-BR 1.40 125 £20.15PIN-150-125-BR 1.50 125 £20.15PIN-160-125-BR 1.60 125 £20.15PIN-180-125-BR 1.80 125 £20.15PIN-200-125-BR 2.00 125 £20.15

61

www.n2-uk.com

Fully Threaded Kirschner Wires Trocar / Trocar

Order CodePin

DiameterLength / Thread RRP

PFT-150-150-TT 1.50 150 £7.43PFT-160-150-TT 1.60 150 £7.43PFT-200-150-TT 2.00 150 £7.43

2.0mm Fine Threaded Fragment Pins

Order CodePin


PIN-M2-5 2.0 125 / 5 £5.01PIN-M2-10 2.0 125 / 10 £5.17PIN-M2-15 2.0 125 / 15 £5.33PIN-M2-20 2.0 125 / 20 £5.49PIN-M2-25 2.0 125 / 25 £5.65PIN-M2-30 2.0 125 / 30 £5.82PIN-M2-40 2.0 125 / 40 £5.97WAS-M2 Fine threaded

washer 5.0 dia£4.73

Negative Threaded Pins Cortical End Thread

Order CodePin


PLT-110-070-TR 1.1 70 / 15 £5.01PLT-150-070-TR 1.5 70 / 15 £5.01PLT-160-070-TR 1.6 70 / 20 £5.01PLT-180-085-TR 1.8 70 / 25 £5.49PLT-200-085-TR 2.0 85 / 25 £5.82PLT-240-100-TR 2.4 100 / 25 £5.82PLT-300-130-TR 3.0 130 / 35 £6.63PLT-350-130-TR 3.5 130 / 40 £6.63PLT-400-150-TR 4.0 150 / 45 £7.27PLT-500-150-TR 5.0 150 / 50 £8.88

62

UK manufactured

Positive Threaded Pins Cortical End Thread

Order CodeShank / Thread Length RRP

PET-1216-070-TR 1.2 / 1.6 70 £6.95PET-1418-070-TR 1.4 / 1.8 70 £6.95PET-1620-070-TR 1.6 / 2.0 70 £6.95PET-1822-070-TR 1.5 / 2.2 70 £9.37PET-2024-085-TR 2.0 / 2.4 85 £6.95PET-2432-100-TR 2.4 / 3.2 100 £7.43PET-2735-110-TR 2.7 / 3.5 110 £7.43PET-3036-120-TR 3.0 / 3.6 120 £8.24PET-3240-130-TR 3.2 / 4.0 130 £8.24PET-3543-130-TR 3.5 / 4.3 130 £9.85PET-4048-150-TR 4.0 / 4.8 150 £9.85

Negative Threaded Ellis Pins Short Fine End Thread

Order CodePin


PST-110-070-TR 1.1 70 / 5 £5.01PST-160-070-TR 1.6 70 / 5 £5.01PST-180-085-TR 1.8 85 / 10 £5.01PST-200-085-TR 2.0 85 / 10 £5.01PST-280-115-TR 2.8 100 / 15 £5.01PST-240-100-TR 2.4 100 / 10 £5.01PST-320-130-TR 3.2 130 / 15 £5.01PST-300-130-TR 3.0 130 / 15 £5.01PST-360-130-TR 3.6 130 / 15 £5.01PST-400-150-TR 4.0 150 / 20 £5.01PLT-400-150-TR 4.0 150 / 45 £7.27PLT-500-150-TR 5.0 150 / 50 £8.88

63

www.n2-uk.com

Positive Threaded Pins Cortical Mid Thread


PMT-1215-085-TR 1.2 / 1.5 85 £9.37PMT-1418-085-TR 1.8 / 1.8 85 £9.37PMT-1620-085-TR 1.6 / 2.0 85 £9.37PMT-1822-085-TR 1.8 / 2.2 85 £9.37PMT-2024-105-TR 2.0 / 2.4 105 £9.37PMT-2432-105-TR 2.4 / 3.2 105 £9.85PMT-2735-115-TR 2.7 / 3.5 115 £9.85PMT-3036-120-TR 3.0 / 3.6 120 £10.83PMT-3240-130-TR 3.2 / 4.0 130 £10.83PMT-3543-140-TR 3.5 / 4.3 140 £11.79PMT-4048-150-TR 4.0 / 4.8 150 £12.76

Positive Threaded Pins Cancellous End Thread


PETC-2435-115-TR 2.4 / 3.5 115 £8.40PETC-3248-150-TR 3.2 / 4.8 150 £9.37

Positive Threaded Pins Cancellous Mid Thread


PMTC-2435-150-TR 2.4 / 3.5 150 £9.37PMTC-3248-180-TR 3.2 / 4.8 180 £10.34

64

Locking Screws

65

www.n2-uk.com

Page

2.0mm Locking Screw (Self Tapping Star Torx Drive) T6 67

2.0/2.4mm Hybrid Locking Screws (Self Tapping Star Torx Drive) T8 68

2.4mm Locking Screw (Self Tapping Hex Drive) 69




2.7/3.5mm Hybrid Locking Screws (Self Tapping Hex Drive) 73



66

UK manufactured

Locking Bone Screw 2.0mm (Self Tapping Star Torx Drive) T6Thread Diameter 2.0mmThread Form HCThread Pitch (A) 0.6mmStar Torx Drive Socket (B) T6Head Diameter (C) 2.8mmCore Diameter 1.4mmHead Pitch 0.6mmDrill Bit For Threaded Hole 1.5mmDrill Bit For Gliding Hole 2.0mmHead to suit 2.0mm locking plates

2.0mm Locking Screw (Self Tapping Star Torx Drive) T6Our range of 2.0mm locking screws are self-tapping with a T6 Torx drive

Order Code Length RRPLOC-20-06-TD 6mm £11.71LOC-20-07-TD 7mm £11.87LOC-20-08-TD 8mm £12.03LOC-20-09-TD 9mm £12.19LOC-20-10-TD 10mm £12.36LOC-20-11-TD 11mm £12.53LOC-20-12-TD 12mm £12.68LOC-20-13-TD 13mm £12.79LOC-20-14-TD 14mm £13.01LOC-20-16-TD 16mm £13.32LOC-20-18-TD 18mm £13.65LOC-20-20-TD 20mm £13.98LOC-20-22-TD 22mm £14.30LOC-20-24-TD 24mm £14.62LOC-20-26-TD 26mm £15.05LOC-20-28-TD 28mm £15.27LOC-20-30-TD 30mm £15.59

Length

B

A

GO C

C

67

www.n2-uk.com

2.0/2.4mm Hybrid Locking Screws (Self Tapping Star Torx Drive) T82.0/2.4 locking screws have been introduced as another option to our range. These are a hybrid between the 2.0mm and 2.4mm screws. They have the heads of the larger screw but the threaded shaft of a 2.0mm.They can fit into any 2.4mm or 2.7mm N2 locking plate, both monoaxial and polyaxial. These screws are ideal for smaller bones or for small fragments. Our range of 2.0/2.4mm locking screws are self-tapping with a T8 Torx drive

Order Code Length RRPLOC-2024-06-TD 6mm £11.71LOC-2024-07-TD 7mm £11.87LOC-2024-08-TD 8mm £12.03LOC-2024-09-TD 9mm £12.19LOC-2024-10-TD 10mm £12.36LOC-2024-11-TD 11mm £12.53LOC-2024-12-TD 12mm £12.68LOC-2024-14-TD 14mm £13.01LOC-2024-16-TD 16mm £13.32LOC-2024-18-TD 18mm £13.65LOC-2024-20-TD 20mm £13.98LOC-2024-22-TD 22mm £14.30LOC-2024-24-TD 24mm £14.62LOC-2024-26-TD 26mm £14.94LOC-2024-28-TD 28mm £15.27LOC-2024-30-TD 30mm £15.59

Locking Bone Screw 2.0mm (Self Tapping Star Torx Drive) T8Thread Diameter 2.0mmThread Form HCThread Pitch (A) 0.6mmStar Torx Drive Socket (B) T8Head Diameter (C) 3.5mmCore Diameter 1.4mmHead Pitch 0.6mmDrill Bit For Threaded Hole 1.5mmDrill Bit For Gliding Hole 2.0mmHead to suit 2.4/2.7mm locking plates

Length

B

A

GO C

C

68

UK manufactured

2.4mm Locking Screw (Self Tapping Hex Drive) Order Code Length RRPLOC-24-06 6 £9.85LOC-24-08 8 £10.17LOC-24-10 10 £10.50LOC-24-12 12 £10.83LOC-24-14 14 £11.15LOC-24-16 16 £11.47LOC-24-18 18 £11.79LOC-24-20 20 £12.12LOC-24-22 22 £12.44LOC-24-24 24 £12.76LOC-24-26 26 £13.08LOC-24-28 28 £13.41LOC-24-30 30 £13.73LOC-24-32 32 £14.05LOC-24-34 34 £14.37LOC-24-36 36 £14.70LOC-24-38 38 £15.03LOC-24-40 40 £15.35

Length

B

A

GO C

C

Locking Bone Screw Ø2.4mm HexagonalSelf Tapping 3 FlutesThread Diameter 2.4mmThread Form HCThread Pitch (A) 0.6mmHexagon Socket (B) 1.5mmHead Diameter (C) 3.5mmCore Diameter 1.8mmHead Pitch 0.6mmDrill Bit for threaded hole 1.8mmDrill bit for gliding hole 2.4mm

69

www.n2-uk.com

2.4mm Locking Screw (Self Tapping Star Torx Drive) T8Order Code Length RRPLOC-24-06-TD 6 £10.66LOC-24-08-TD 8 £10.98LOC-24-10-TD 10 £11.31LOC-24-12-TD 12 £11.63LOC-24-14-TD 14 £11.96LOC-24-16-TD 16 £12.27LOC-24-18-TD 18 £12.60LOC-24-20-TD 20 £12.93LOC-24-22-TD 22 £13.25LOC-24-24-TD 24 £13.57LOC-24-26-TD 26 £13.89LOC-24-28-TD 28 £14.22LOC-24-30-TD 30 £14.54LOC-24-32-TD 32 £14.86LOC-24-34-TD 34 £15.18LOC-24-36-TD 36 £15.51LOC-24-38-TD 38 £15.83LOC-24-40-TD 40 £16.16LOC-24-45-TD 45 £16.64LOC-24-50-TD 50 £16.96

Locking Bone Screw Ø2.4mm (Self Tapping Star Torx Drive) T8Self Tapping 3 Flutes

Thread Diameter 2.4mmThread Form HCThread Pitch (A) 0.6mmStar Torx Drive Socket (B) T8Head Diameter (C) 3.5mmCore Diameter 1.8mmHead Pitch 0.6mmDrill Bit for threaded hole 1.8mmDrill bit for gliding hole 2.4mm

Length

B

A

GO C

C

70

UK manufactured

2.7mm Locking Screw (Self Tapping Hex Drive)Order Code Length RRPLOC-27-06 6 £9.85LOC-27-08 8 £10.17LOC-27-10 10 £10.50LOC-27-12 12 £10.83LOC-27-14 14 £11.15LOC-27-16 16 £11.47LOC-27-18 18 £11.79LOC-27-20 20 £12.12LOC-27-22 22 £12.44LOC-27-24 24 £12.76LOC-27-26 26 £13.08LOC-27-28 28 £13.41LOC-27-30 30 £13.73LOC-27-32 32 £14.05LOC-27-34 34 £14.37LOC-27-36 36 £14.70LOC-27-38 38 £15.03LOC-27-40 40 £15.35LOC-27-45 45 £15.83LOC-27-50 50 £16.15

Locking Bone Screw Ø2.7mm HexagonalSelf Tapping 3 FlutesThread Diameter 2.7mmThread Form HCThread Pitch (A) 0.6mmHexagon Socket (B) 1.5mmHead Diameter (C) 3.5mmCore Diameter 2.0mmHead Pitch 0.6mmDrill Bit for threaded hole 2.0mmDrill bit for gliding hole 2.7mm

71

Length

B

A

GO C

C

www.n2-uk.com

2.7mm Locking Screw (Self Tapping Star Torx Drive) T8Order Code Length RRPLOC-27-06-TD 6 £10.66LOC-27-08-TD 8 £10.98LOC-27-10-TD 10 £11.31LOC-27-12-TD 12 £11.63LOC-27-14-TD 14 £11.96LOC-27-16-TD 16 £12.27LOC-27-18-TD 18 £12.60LOC-27-20-TD 20 £12.93LOC-27-22-TD 22 £13.25LOC-27-24-TD 24 £13.57LOC-27-26-TD 26 £13.89LOC-27-28-TD 28 £14.22LOC-27-30-TD 30 £14.54LOC-27-32-TD 32 £14.86LOC-27-34-TD 34 £15.18LOC-27-36-TD 36 £15.51LOC-27-38-TD 38 £15.83LOC-27-40-TD 40 £16.16LOC-27-45-TD 45 £16.64LOC-27-50-TD 50 £16.96

Locking Bone Screw Ø2.7mm (Self Tapping Hex Drive) T8Self Tapping 3 FlutesThread Diameter 2.7mmThread Form HCThread Pitch (A) 0.6mmStar Torx (B) T8Head Diameter (C) 3.5mmCore Diameter 2.0mmHead Pitch 0.6mmDrill Bit for threaded hole 2.0mmDrill bit for gliding hole 2.7mm

Length

B

A

GO C

C

72

UK manufactured

Locking Bone Screw Ø2.7/3.5mmThread diameter 2.7mmThread form HCThread Pitch (A) 0.8mmDrive Hex 2.5mmHead diameter (C) 5.0mmCore 2.0mmHead pitch 0.8mmDrill bit 2.0 mmHead to suit 3.5mm locking plates

2.7/3.5mm Hybrid Locking Screws (Self Tapping Hex Drive)2.7/3.5mm locking screws are also available. These have 3.5mm heads and fit any 3.5mm locking plate from our extensive range of monoaxial and polyaxial locking plates. However, these have a 2.7mm threaded shaft with a 2.5mm hex drive.

Order Code Length RRPLOC-2735-10 10mm £11.31LOC-2735-12 12mm £11.63LOC-2735-14 14mm £11.96LOC-2735-16 16mm £12.27LOC-2735-18 18mm £12.60LOC-2735-20 20mm £12.93LOC-2735-22 22mm £13.25LOC-2735-24 24mm £13.57LOC-2735-26 26mm £13.89LOC-2735-28 28mm £14.22LOC-2735-30 30mm £14.54

73

Length

B

A

GO C

C

www.n2-uk.com

3.5mm Locking Screw (Self Tapping Hex Drive) Order Code Length RRPLOC-35-10 10 £10.50LOC-35-12 12 £10.83LOC-35-14 14 £11.15LOC-35-16 16 £11.47LOC-35-18 18 £11.79LOC-35-20 20 £12.12LOC-35-22 22 £12.44LOC-35-24 24 £12.76LOC-35-26 26 £13.08LOC-35-28 28 £13.41LOC-35-30 30 £13.73LOC-35-32 32 £14.05LOC-35-34 34 £14.37LOC-35-36 36 £14.70LOC-35-38 38 £15.03LOC-35-40 40 £15.35LOC-35-42 42 £15.67LOC-35-44 44 £15.99LOC-35-45 45 £16.32LOC-35-46 46 £16.64LOC-35-48 48 £16.96LOC-35-50 50 £17.28LOC-35-52 52 £17.61LOC-35-54 54 £17.93LOC-35-55 55 £18.09LOC-35-56 56 £18.25LOC-35-58 58 £18.57LOC-35-60 60 £18.90

3.5mm Locking Screw (Self Tapping Hex Drive)Self Tapping 3 FlutesThread Diameter 3.5mmThread Form HCThread Pitch (A) 0.8mmHexagon Socket (B) 2.5mmHead Diameter (C) 5.0mmCore Diameter 2.9mmHead Pitch 0.8mmDrill Bit for threaded hole 2.7mmDrill bit for gliding hole 3.5mm

74

Length

B

A

GO C

C

UK manufactured

3.5mm Locking Screw (Self Tapping Star Torx Drive) T15Order Code Length RRPLOC-35-10-TD 10 £11.31LOC-35-12-TD 12 £11.63LOC-35-14-TD 14 £11.96LOC-35-16-TD 16 £12.27LOC-35-18-TD 18 £12.60LOC-35-20-TD 20 £12.93LOC-35-22-TD 22 £13.25LOC-35-24-TD 24 £13.57LOC-35-26-TD 26 £13.89LOC-35-28-TD 28 £14.22LOC-35-30-TD 30 £14.54LOC-35-32-TD 32 £14.86LOC-35-34-TD 34 £15.18LOC-35-36-TD 36 £15.51LOC-35-38-TD 38 £15.83LOC-35-40-TD 40 £16.16LOC-35-42-TD 42 £16.47LOC-35-44-TD 44 £16.80LOC-35-45-TD 45 £17.13LOC-35-46-TD 46 £17.45LOC-35-48-TD 48 £17.77LOC-35-50-TD 50 £18.09LOC-35-52-TD 52 £18.42LOC-35-54-TD 54 £18.74LOC-35-55-TD 55 £18.90LOC-35-56-TD 56 £19.06LOC-35-58-TD 58 £19.38LOC-35-60-TD 60 £19.71

3.5mm Locking Screw (Self Tapping Star Torx Drive)Self Tapping 3 FlutesThread Diameter 3.5mmThread Form HCThread Pitch (A) 0.8mmStar Torx Drive Socket (B) T15Head Diameter (C) 5.0mmCore Diameter 2.9mmHead Pitch 0.8mmDrill Bit for threaded hole 2.7mmDrill bit for gliding hole 3.5mm

75

Length

B

A

GO C

C

Locking Plates

77

www.n2-uk.com

Page

2.0mm Locking Plate 79

2.0mm YY plates 79

Circular Cuttable Locking Plate 79

2mm Locking T-Plates 79

2.4 Locking Plate 80

2.7 Locking Plate 82

3.5mm Locking Plate 84

2.0mm Locking Drill Guide 86




2.0mm Locking Plug 86



78

UK manufactured

2.0mm Locking Plate There is a need for 2.0mm locking screws and plates for very small patients so we have launched two cuttable plates that will prove to be a versatile addition to your inventory.

Order Code Description RRPLPL-CUT-20-100-18 2.0mm Cuttable locking plate 18 Holes 100mm Long £100.00LPL-CUT-20-100-20 2.0mm Cuttable locking plate 20 Holes 100mm Long £100.00

scale 1:1

2.0mm YY plates Newly added these 2.0mm YY plates offer additional stability at both ends of the fracture. The plate flexibility ensures easy contourabilty and allows a good plate/bone interface.

Order Code Description RRPLPL-YY-20-12 2.0mm 12 Hole Locking Double ended Y plate £120.00LPL-YY-20-13 2.0mm 13 Hole Locking Double ended Y plate £120.00LPL-YY-20-14 2.0mm 14 Hole Locking Double ended Y plate £120.00

LPL-YY-20-12

LPL-YY-20-13

LPL-YY-20-14

Circular Cuttable Locking PlateThe smallest ring in our range (see page 168) this cuttable monoaxial plate is useful for a variety of maxiofacial and pelvic trauma injuries.

Order Code Description RRPLPL-RP-20-36-24 2.0mm Locking Maxillofacial Ring Plate

24 Hole 36mm Diameter£140.00

2mm Locking T-PlatesTwo useful locking T-Plates for smaller patients.

Order CodeHead Locking

screw sizeShaft Locking

screw sizeShaft DCP screw size Length RRP

LPL-T-20-20-49 2.0 2.0 2.0 49 £60.00LPL-T-20-20-35 2.0 2.0 2.0 35 £50.00

LPL-T-20-20-49

LPL-T-20-20-35

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

79

www.n2-uk.com

Order Code Description No. of Holes RRPLPL-24-04 2.4 Stacked locking plate 31mm Long 4 £35.54LPL-24-05 2.4 Stacked locking plate 38mm Long 5 £37.96LPL-24-06 2.4 Stacked locking plate 45mm Long 6 £40.38LPL-24-07 2.4 Stacked locking plate 52mm Long 7 £42.81LPL-24-08 2.4 Stacked locking plate 59mm Long 8 £45.23LPL-24-09 2.4 Stacked locking plate 66mm Long 9 £47.65LPL-24-10 2.4 Stacked locking plate 73mm Long 10 £50.07LPL-24-11 2.4 Stacked locking plate 80mm Long 11 £52.50LPL-24-12 2.4 Stacked locking plate 87mm Long 12 £54.93LPL-24-13 2.4 Stacked locking plate 94mm Long 13 £57.35LPL-24-14 2.4 Stacked locking plate 101mm Long 14 £59.77LPL-24-15 2.4 Stacked locking plate 108mm Long 15 £62.19LPL-24-16 2.4 Stacked locking plate 115mm Long 16 £64.62LPL-24-17 2.4 Stacked locking plate 122mm Long 17 £67.85LPL-24-18 2.4 Stacked locking plate 129mm Long 18 £71.07

Cortical Locking Combination of both

2.4 Locking Plate

2.4mm Conical shaped threaded holes to suit either twin start Locking screws or standard plating techniques using approved ISO Cortical Bone screws. This dual combination hole is integral to the plates design not to pull the locking screw through the plate and offer a rigid reversible dual application solution to fixation.The limited contact design on the underside of the plate offer the added advantage of reducing bending stress risers and vascular trauma.

All Plates are made from Stainless Steel ISO 5832-1

80

UK manufactured

2.4 Locking Plate

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

LPL-24-18

LPL-24-17

LPL-24-16

LPL-24-15

LPL-24-14

LPL-24-13

LPL-24-12

LPL-24-11

LPL-24-10

LPL-24-09

LPL-24-08

LPL-24-07

LPL-24-06

LPL-24-05

LPL-24-04

81

www.n2-uk.com

Order Code Description No. of Holes RRPLPL-27-04 2.7mm Stacked locking hole plate 34mm long 4 £35.54LPL-27-05 2.7mm Stacked locking hole plate 42mm long 5 £37.96LPL-27-06 2.7mm Stacked locking hole plate 50mm long 6 £40.38LPL-27-07 2.7mm Stacked locking hole plate 58mm long 7 £42.81LPL-27-08 2.7mm Stacked locking hole plate 66mm long 8 £45.23LPL-27-09 2.7mm Stacked locking hole plate 74mm long 9 £47.65LPL-27-10 2.7mm Stacked locking hole plate 82mm long 10 £50.07LPL-27-11 2.7mm Stacked locking hole plate 90mm long 11 £52.50LPL-27-12 2.7mm Stacked locking hole plate 98mm long 12 £54.93LPL-27-13 2.7mm Stacked locking hole plate 106mm long 13 £57.35LPL-27-14 2.7mm Stacked locking hole plate 114mm long 14 £59.77LPL-27-15 2.7mm Stacked locking hole plate 122mm long 15 £62.19LPL-27-16 2.7mm Stacked locking hole plate 130mm long 16 £64.62LPL-27-17 2.7mm Stacked locking hole plate 138mm long 17 £67.85LPL-27-18 2.7mm Stacked locking hole plate 146mm long 18 £71.07

2.7 Locking Plate

3.5mm and 2.7mm Conical shaped threaded holes to suit either twin start Locking screws or standard plating techniques using approved ISO Cortical Bone screws. This dual combination hole is integral to the plates design not to pull the locking screw through the plate and offer a rigid explantable solution to fixation.The limited contact design on the underside of the plate offer the added advantage of reducing bending stress risers and vascular trauma.All Plates are made from Stainless Steel ISO 5832-1

82

UK manufactured

2.7 Locking Plate

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

LPL-27-18

LPL-27-17

LPL-27-16

LPL-27-15

LPL-27-14

LPL-27-13

LPL-27-12

LPL-27-11

LPL-27-10

LPL-27-09

LPL-27-08

LPL-27-07

LPL-27-06

LPL-27-05

LPL-27-04

83

www.n2-uk.com

Order Code Description No. of Holes RRPLPL-35-04 3.5mm Stacked locking hole plate 46mm long 4 £35.54LPL-35-05 3.5mm Stacked locking hole plate 56mm long 5 £37.96LPL-35-06 3.5mm Stacked locking hole plate 66mm long 6 £40.38LPL-35-07 3.5mm Stacked locking hole plate 76mm long 7 £42.81LPL-35-08 3.5mm Stacked locking hole plate 86mm long 8 £45.23LPL-35-09 3.5mm Stacked locking hole plate 96mm long 9 £47.65LPL-35-10 3.5mm Stacked locking hole plate 106mm long 10 £50.07LPL-35-11 3.5mm Stacked locking hole plate 116mm long 11 £52.50LPL-35-12 3.5mm Stacked locking hole plate 126mm long 12 £54.93LPL-35-13 3.5mm Stacked locking hole plate 136mm long 13 £57.35LPL-35-14 3.5mm Stacked locking hole plate 146mm long 14 £59.77LPL-35-15 3.5mm Stacked locking hole plate 156mm long 15 £62.19LPL-35-16 3.5mm Stacked locking hole plate 166mm long 16 £64.62LPL-35-17 3.5mm Stacked locking hole plate 176mm long 17 £67.85LPL-35-18 3.5mm Stacked locking hole plate 186mm long 18 £71.07

3.5mm Locking Plate Locking

Cortical

Combination of both

84

UK manufactured

3.5mm Locking Plate

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

LPL-

35-1

8

LPL-

35-1

7

LPL-

35-1

6

LPL-

35-1

5

LPL-

35-1

4

LPL-

35-1

3

LPL-

35-1

2

LPL-

35-1

1

LPL-

35-0

4

LPL-

35-0

5

LPL-

35-0

6

LPL-

35-0

7

LPL-

35-0

8

LPL-

35-0

9

LPL-

35-1

0

85

www.n2-uk.com

Order Code Length RRPLOC-35-DGS 45 £40.00LOC-35-DGL 65 £40.00

3.5mm Locking Drill Guide

Order Code Length RRPLOC-27-DGS 35 £40.00LOC-27-DGL 55 £40.00


Order Code Length RRPLOC-24-DGS 30 £40.00


Order Code Head RRPL0C-35-P Hex £6.87L0C-35-P-TD Star Torx £6.87

3.5mm Locking Plug

Order Code Head RRPLOC-2724-P Hex £6.87LOC-2724-P-TD Star Torx £6.87

2.7mm Locking Plug

Order Code Length RRPLOC-20-DGS 23 £40.00LOC-2024-DGS 25 £40.00


Order Code Head RRPLOC-20-PTD Star Torx £6.87

2.0mm Locking Plug

86

UK manufactured

3.5mm Locking Drill Guide LOC-35-DGS

LOC-35-DGL


LOC-27-DGL


2.7mm Locking PlugLOC-2724-P

3.5mm Locking Plug

LOC-35-P

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0


LOC-2024-DGS

2.0mm Locking PlugLOC-20-PTD

87

www.n2-uk.com88

Bone Plates

89

www.n2-uk.com

Page

1.5mm Mini Self Compression Plate 92


2.0mm Broad Mini Self Compression Plate 94


2.7mm Mini Self Compression Plate Thin 96

2.7mm Mini Self Compression Plate Thick 96

3.5mm Self Compression Plate Straight Narrow 98

3.5mm Self Compression Plate Straight Broad 100

4.5mm Self Compression Plate Straight Narrow 102

4.5mm Self Compression Plate Straight Broad 104

2.0/2.7/3.5/4.5mm Buttress Bridge Plate (Biological Healing Plate) 106

3.5mm Broad Buttress Bridge Plate (Biological Healing Plate) 108

2.0mm Mini Plate Straight Tubular 110

2.7mm Quarter Tubular 110

3.5mm One Third Tubular 110

2.7mm Reconstruction Plates 112

3.5mm Reconstruction Plates 112

Cuttable/Malleable Plates 114

Broad Cuttable Plates 114

H-Plates 116

2.0mm Distal Plates 116

2.7mm Distal Plates 116

3.5 T-Plates Round Hole 116

Acetabular Plates 116

Hybrid T-Plates 116

90

UK manufactured

Page

Pantarsal Arthrodesis Plates 121

Canine Cranial Pantarsal Arthrodesis Plate 122

Cat Pantarsal Plate Cranial Position 122

Partial Carpal Arthrodesis Plate 124

Pancarpal Arthrodesis Plates DCP Style 124

Pancarpal Arthrodesis Plates Round Holes 124

Locking Pancarpal Arthrodesis 124

2.0mm Limited Contact Plate 126




3.5mm Broad Limited Contact Plate 132

Supracondylar Osteotomy (Distal Femur) Plates 134

Supracondylar Osteotomy Plates 134

Intertarsal Arthrodesis Plates 134

2.0mm Round Hole Plate 136



2.7mm Heavy Duty Round Hole Plate 138

3.5mm Heavy Duty Round Hole Plate 138

TPO EQ 140

TPLO Delta ‘Style’ Plates 140

TPLO (Slocum style) 142

TPLO Compression Plates 142

TPLO Pre Contoured Compression Plates 142

Titanium Plates 144

Pancarpal and Pantarsal 146

91

www.n2-uk.com

1.5mm Mini Compression Plate

1.5mm Compression Plate - Dimensions are 4mm wide, 1mm thick.

Order Code No. of Holes Length mm RRPMCP-15-02 2 11 £22.62MCP-15-03 3 15 £22.62MCP-15-04 4 19 £22.62MCP-15-05 5 23 £25.85MCP-15-06 6 27 £29.07MCP-15-07 7 31 £32.31MCP-15-08 8 35 £35.54MCP-15-09 9 39 £38.77MCP-15-10 10 43 £42.00MCP-15-11 11 47 £45.23MCP-15-12 12 51 £48.46MCP-15-13 13 55 £54.93

Order Code No. of Holes Length mm RRPMCP-20-02 2 12 £16.15MCP-20-03 3 17 £19.38MCP-20-04 4 22 £22.62MCP-20-05 5 27 £25.85MCP-20-06 6 32 £29.07MCP-20-07 7 37 £32.31MCP-20-08 8 42 £35.54MCP-20-09 9 47 £38.77MCP-20-10 10 52 £42.00MCP-20-11 11 57 £45.23MCP-20-12 12 62 £48.46MCP-20-13 13 67 £51.70MCP-20-14 14 72 £54.93

2.0mm Mini Self Compression Plate

2.0mm Compression Plate - Dimensions are 5mm wide, 1mm thick up to 6 holes and 1.5mm thick upwards. Use with 2.0mm Cortical Screws.

92

UK manufactured

MCP-20-14

MCP-20-13

MCP-20-12

MCP-20-11

MCP-20-10

MCP-20-09

MCP-20-08

MCP-20-07

MCP-20-06

MCP-20-05

MCP-20-04

MCP-20-03

MCP-20-02


1.5mm Mini Compression Plate

MCP-15-13

MCP-15-12

MCP-15-11

MCP-15-10

MCP-15-09

MCP-15-08

MCP-15-07

MCP-15-06

MCP-15-05

MCP-15-04

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

93

www.n2-uk.com

Order Code No. of Holes Length mm RRPMCP-24-04 4 31.5 £21.00MCP-24-05 5 38.5 £24.23MCP-24-06 6 45.5 £27.46MCP-24-07 7 52.5 £30.69MCP-24-08 8 59.5 £33.93MCP-24-09 9 66.5 £37.15MCP-24-10 10 73.5 £40.38MCP-24-11 11 80.5 £43.62MCP-24-12 12 87.5 £46.85MCP-24-13 13 94.5 £50.07MCP-24-14 14 101.5 £53.31MCP-24-16 16 115.5 £59.77


Self-compressing plates that achieve axial compression of the fracture site by combining screw hole geometry with screw insertion. Screws can be inserted off centre to the screw hole so that when tightened the head will glide alongside the hole displacing the plate in the direction of the fracture resulting in compression. They can adapt to many different internal fixation situations and function as a dynamic compression plate, a neutralization plate, or be used in bridging fashion as a lengthening plate. Use with ISO standard Cortical Bone Screws with spherical head.All Plates are made from Stainless Steel ISO 5832-1

2.4mm Compression Plate - Dimensions are 7mm wide, 2mm thick. Use with 2.4mm Cortical Screws.

Order Code No. of Holes Length mm RRPMCPX-20-02 2 12 £16.15MCPX-20-03 3 17 £19.38MCPX-20-04 4 22 £22.62MCPX-20-05 5 27 £25.85MCPX-20-06 6 32 £29.07

2.0mm Broad Mini Compression Plate

2.0mm Compression Plate Broad - Dimensions are 5mm wide by 1.5mm thick. Use with 2.0mm Cortical Screws.

94

UK manufactured

MCP-24-16

MCP-24-14

MCP-24-13

MCP-24-12

MCP-24-11

MCP-24-10

MCP-24-09

MCP-24-08

MCP-24-07

MCP-24-06

MCP-24-05

MCP-24-04


MCPX-20-06

MCPX-20-05

MCPX-20-04

MCPX-20-03

MCPX-20-02

2.0mm Broad Mini Self Compression Plate

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

95

www.n2-uk.com

Order Code No. of Holes Length mm RRPMCP-27-07 7 61 £27.46MCP-27-08 8 69 £29.07MCP-27-09 9 77 £30.69MCP-27-10 10 85 £32.31MCP-27-11 11 93 £33.93MCP-27-12 12 101 £35.54MCP-27-13 13 109 £37.15MCP-27-14 14 117 £38.77MCP-27-15 15 125 £40.38MCP-27-16 16 133 £42.00

2.7mm Mini Self Compression Plate Thick

Order Code No. of Holes Length mm RRPMCP-27-02 2 21 £17.77MCP-27-03 3 29 £19.38MCP-27-04 4 37 £21.00MCP-27-05 5 45 £22.62MCP-27-06 6 53 £24.23

2.7mm Mini Self Compression Plate Thin

Dimensions are 8mm wide, 2mm thick up to 6 holes and 2.5mm thick upwards. Use with 2.7mm Cortical Screws.Self-compressing plates that achieve axial compression of the fracture site by combining screw hole geometry with screw insertion. Screws can be inserted off centre to the screw hole so that when tightened the head will glide alongside the hole displacing the plate in the direction of the fracture resulting in compression. They can adapt to many different internal fixation situations and function as a dynamic compression plate, a neutralization plate, or be used in bridging fashion as a lengthening plate. Use with ISO standard Cortical Bone Screws with spherical head.All Plates are made from Stainless Steel ISO 5832-1

96

UK manufactured

MCP-27-07

MCP-27-08

MCP-27-09

MCP-27-10

MCP-27-11

MCP-27-12

MCP-27-13

MCP-27-14

MCP-27-15

MCP-27-16

2.7mm Mini Self Compression Plate 2.5mm Thick

2.7mm Mini Self Compression Plate 2.0mm ThinMCP-27-02

MCP-27-03

MCP-27-04

MCP-27-05

MCP-27-06

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

97

www.n2-uk.com

Order Code No. of Holes Length mm RRPCPN-35-02 2 26 £19.38CPN-35-03 3 38 £21.00CPN-35-04 4 50 £22.62CPN-35-05 5 62 £24.23CPN-35-06 6 74 £25.85CPN-35-07 7 86 £27.46CPN-35-08 8 98 £29.07CPN-35-09 9 110 £30.69CPN-35-10 10 122 £32.31CPN-35-11 11 134 £33.93CPN-35-12 12 146 £35.54CPN-35-13 13 158 £37.16CPN-35-14 14 170 £38.77CPN-35-15 15 182 £40.38CPN-35-16 16 194 £42.00CPN-35-17 17 206 £43.62CPN-35-18 18 218 £45.23

3.5mm Self Compression Plate Straight Narrow

Dimensions are 10.2mm wide, 3.2mm thick Pre contoured Profile. Use with 3.5mm Cortical Screws or 3.5mm/4mm Cancellous.Self-compressing plates that achieve axial compression of the fracture site by combining screw hole geometry with screw insertion. Screws can be inserted off centre to the screw hole so that when tightened the head will glide alongside the hole displacing the plate in the direction of the fracture resulting in compression. They can adapt to many different internal fixation situations and function as a dynamic compression plate, a neutralization plate, or be used in bridging fashion as a lengthening plate. Use with ISO standard Cortical Bone Screws with spherical head.All Plates are made from Stainless Steel ISO 5832-1

98

UK manufactured


CPN

-35-

08

CPN

-35-

09

CPN

-35-

10

CPN

-35-

11

CPN

-35-

12

CPN

-35-

13

CPN

-35-

14

CPN

-35-

15

CPN

-35-

16

CPN

-35-

17

CPN

-35-

18

CPN

-35-

07

CPN

-35-

06

CPN

-35-

05

CPN

-35-

04

CPN

-35-

03

CPN

-35-

02

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

99

www.n2-uk.com

Order Code No. of Holes Length mm RRPCPB-35-02 2 26 £22.62CPB-35-03 3 38 £25.85CPB-35-04 4 50 £29.07CPB-35-05 5 62 £32.31CPB-35-06 6 74 £35.54CPB-35-07 7 86 £38.77CPB-35-08 8 98 £42.00CPB-35-09 9 110 £45.23CPB-35-10 10 122 £48.46CPB-35-11 11 134 £51.69CPB-35-12 12 146 £54.93CPB-35-13 13 158 £58.15CPB-35-14 14 170 £61.38CPB-35-15 15 182 £64.62CPB-35-16 16 194 £67.85CPB-35-17 17 206 £71.09CPB-35-18 18 218 £74.31CPB-35-19 19 230 £77.54CPB-35-20 20 242 £80.77CPB-35-21 21 254 £84.00CPB-35-22 22 266 £87.23

3.5mm Self Compression Plate Straight Broad

Dimensions are 11.5mm wide; 4mm thick Pre contoured Profile. Use with 3.5mm Cortical Screws or 3.5mm/4mm Cancellous.Self-compressing plates that achieve axial compression of the fracture site by combining screw hole geometry with screw insertion. Screws can be inserted off centre to the screw hole so that when tightened the head will glide alongside the hole displacing the plate in the direction of the fracture resulting in compression. They can adapt to many different internal fixation situations and function as a dynamic compression plate, a neutralization plate, or be used in bridging fashion as a lengthening plate. Use with ISO standard Cortical Bone Screws with spherical head.All Plates are made from Stainless Steel ISO 5832-1Other sizes available on request.

100

UK manufactured 3.5mm Self Compression Plate Straight Broad

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

101

CPB

-35-

10

CPB

-35-

09

CPB

-35-

08

CPB

-35-

07

CPB

-35-

06

CPB

-35-

05

CPB

-35-

04

CPB

-35-

03

CPB

-35-

02

CPB

-35-

11

CPB

-35-

12

CPB

-35-

13

CPB

-35-

14

CPB

-35-

15

CPB

-35-

16

CPB

-35-

17

CPB

-35-

18

CPB

-35-

19

CPB

-35-

20

www.n2-uk.com

Order Code No. of Holes Length mm RRPCPN-45-02 2 39 £16.15CPN-45-03 3 55 £18.57CPN-45-04 4 71 £21.00CPN-45-05 5 87 £23.43CPN-45-06 6 103 £25.85CPN-45-07 7 119 £28.27CPN-45-08 8 135 £30.69CPN-45-09 9 151 £33.12CPN-45-10 10 167 £35.54CPN-45-11 11 183 £37.96CPN-45-12 12 199 £40.38CPN-45-13 13 215 £42.81CPN-45-14 14 231 £45.23CPN-45-15 15 247 £47.65CPN-45-16 16 263 £50.07CPN-45-17 17 279 £52.50CPN-45-18 18 295 £54.93


Dimensions are 11.5mm wide; 4mm thick Pre contoured Profile. Use with 4.5mm Cortical Screws. 6.5mm End Cancellous screws.Self-compressing plates that achieve axial compression of the fracture site by combining screw hole geometry with screw insertion. Screws can be inserted off centre to the screw hole so that when tightened the head will glide alongside the hole displacing the plate in the direction of the fracture resulting in compression. They can adapt to many different internal fixation situations and function as a dynamic compression plate, a neutralization plate, or be used in bridging fashion as a lengthening plate. Use with ISO standard Cortical Bone Screws with spherical head.All Plates are made from Stainless Steel ISO 5832-1

102

UK manufactured 4.5mm Self Compression Plate Straight Narrow

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

103

CPN

-45-

02

CPN

-45-

03

CPN

-45-

04

CPN

-45-

05

CPN

-45-

06

CPN

-45-

15

CPN

-45-

14

CPN

-45-

13

CPN

-45-

12

CPN

-45-

11

CPN

-45-

16

CPN

-45-

10

CPN

-45-

09

CPN

-45-

08

CPN

-45-

07

www.n2-uk.com

Order Code No. of Holes Length mm RRPCPB-45-05 5 87 £30.69CPB-45-06 6 103 £33.12CPB-45-07 7 119 £35.54CPB-45-08 8 135 £37.96CPB-45-09 9 151 £40.38CPB-45-10 10 167 £42.81CPB-45-11 11 183 £45.23CPB-45-12 12 199 £47.65CPB-45-13 13 215 £50.07CPB-45-14 14 231 £52.50CPB-45-15 15 247 £54.93CPB-45-16 16 263 £57.35CPB-45-17 17 279 £59.77CPB-45-18 18 295 £62.19


CPB

-45-

05

CPB

-45-

06

CPB

-45-

07

CPB

-45-

08

104

Dimensions are 16.5mm wide; 4.5mm thick Pre contoured Profile. Use with 4.5mm Cortical Screws. 6.5mm End Cancellous screws.Self-compressing plates that achieve axial compression of the fracture site by combining screw hole geometry with screw insertion. Screws can be inserted off centre to the screw hole so that when tightened the head will glide alongside the hole displacing the plate in the direction of the fracture resulting in compression. They can adapt to many different internal fixation situations and function as a dynamic compression plate, a neutralization plate, or be used in bridging fashion as a lengthening plate. Use with ISO standard Cortical Bone Screws with spherical head.All Plates are made from Stainless Steel ISO 5832-1Other sizes available on request.

UK manufactured


200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

CPB

-45-

09

105

CPB

-45-

10

CPB

-45-

11

CPB

-45-

12

CPB

-45-

13

CPB

-45-

14

CPB

-45-

15

CPB

-45-

16

www.n2-uk.com

Order Code No. of Holes Length mm RRPBBP-20-07-060 7 60 £20.19BBP-20-08-065 8 65 £20.60BBP-20-08-070 8 70 £21.00

Order Code No. of Holes Length mm RRPBBP-27-06-063 6 63 £21.81BBP-27-07-067 6 67 £22.21BBP-27-07-073 7 73 £22.62BBP-27-07-079 7 79 £23.02BBP-27-08-075 8 75 £23.43BBP-27-08-081 8 81 £23.82BBP-27-08-085 8 85 £24.23

Order Code No. of Holes Length mm RRPBBP-35-07-120 7 120 £24.63BBP-35-07-130 7 130 £25.04BBP-35-07-142 7 142 £25.44BBP-35-08-130 8 130 £25.85BBP-35-08-142 8 142 £26.25BBP-35-08-154 8 154 £26.65

Order Code No. of Holes Length mm RRPBBP-45-07-138 7 138 £33.93BBP-45-07-151 7 151 £35.94BBP-45-07-164 7 164 £38.37BBP-45-08-150 8 150 £38.37BBP-45-08-163 8 163 £40.38BBP-45-08-176 8 176 £42.40

2.0/2.7/3.5/4.5mm Buttress Bridge Plate (Biological Healing Plate)

Biological Healing Plates (Buttress Bridge Plates)2.0mm/2.7mm is 8mm wide by 2mm Thick.3.5mm are 10.2mm wide by 3.2mm Thick Pre-contoured Profile.4.5mm are 12mm by 4.0mm Thick Pre-Contoured Profile.A plate that prevents axial deformity or deviation as a result of shearing or bending forces (central portion of plate has no screw holes to increase plate strength). They are also used to splint or bridge a fracture area to maintain the length of the bone. They can be used in conjunction with lag screws and can maintain alignment of highly comminute segments of bone (a fracture in which the bone is splintered or crushed into numerous pieces). Gaps in the bone may be present. When gaps are present, the plate with this type of fixation is subject to full loading. Therefore, every possible effort should be made to maintain soft tissue attachments and blood supply to the comminute fragments since union will depend on the formation of a callus bridge and not direct healing of the bone.All Plates are made from Stainless Steel ISO 5832-1

106

UK manufactured 2.0/2.7/3.5/4.5mm Buttress Bridge Plate (Biological Healing Plate)

BBP-

27-0

7-07

3

BBP-

27-0

8-07

5

BBP-

27-0

7-79

BBP-

27-0

8-08

1

BBP-

27-0

8-08

5

BBP-

27-0

6-06

7

BBP-

20-0

8-06

5

BBP-

20-0

8-07

0

BBP-

27-0

6-06

3

BBP-

20-0

7-06

0

BBP-

35-0

7-13

0

BBP-

35-0

8-13

0

BBP-

35-0

7-14

2

BBP-

35-0

8-14

2

BBP-

35-0

8-15

4

BBP-

35-0

7-12

0

BBP-

45-0

7-15

1

BBP-

45-0

8-15

0

BBP-

45-0

7-13

8

BBP-

45-0

8-16

3

BBP-

45-0

7-16

4

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

107

www.n2-uk.com

3.5mm Broad Buttress Bridge Plate (Biological Healing Plate)

Biological Healing Plates (Buttress Bridge Plates)3.5mm Broad are 11.5mm by 4.0mm Thick Pre-Contoured ProfileA plate that prevents axial deformity or deviation as a result of shearing or bending forces (central portion of plate has no screw holes to increase plate strength). They are also used to splint or bridge a fracture area to maintain the length of the bone. They can be used in conjunction with lag screws and can maintain alignment of highly comminute segments of bone (a fracture in which the bone is splintered or crushed into numerous pieces). Gaps in the bone may be present. When gaps are present, the plate with this type of fixation is subject to full loading. Therefore, every possible effort should be made to maintain soft tissue attachments and blood supply to the comminute fragments since union will depend on the formation of a callus bridge and not direct healing of the bone.All Plates are made from Stainless Steel ISO 5832-1

Order Code No. of Holes Length mm RRPBBPX-35-08-130 8 130 £35.94BBPX-35-07-130 7 130 £33.92BBPX-35-08-142 8 142 £35.94BBPX-35-07-142 7 142 £33.92BBPX-35-08-154 7 154 £36.35BBPX-35-07-154 8 154 £38.36

108

UK manufactured

3.5mm Broad Buttress Bridge Plate (Biological Healing Plate)

BBPX

-35-

08-1

54

BBPX

-35-

07-1

42

BBPX

-35-

08-1

42

BBPX

-35-

07-1

30

BBPX

-35-

08-1

30

BBPX

-35-

07-1

54

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

109

www.n2-uk.com

Order Code No. of Holes Length mm RRPQTP-27-03 3 24 £9.69QTP-27-04 4 32 £11.31QTP-27-05 5 40 £12.93QTP-27-06 6 48 £14.54QTP-27-07 7 56 £16.15QTP-27-08 8 64 £17.77

2.7mm Quarter Tubular

Order Code No. of Holes Length mm RRPTTP-35-02 2 25 £12.60TTP-35-03 3 37 £13.13TTP-35-04 4 49 £14.18TTP-35-05 5 61 £15.23TTP-35-06 6 73 £16.28TTP-35-07 7 85 £17.32TTP-35-08 8 97 £18.38TTP-35-09 9 109 £19.43TTP-35-10 10 121 £20.48TTP-35-11 11 133 £21.53

3.5mm One Third Tubular

One third Tubular - Dimensions are 9mm wide, 1.1mm pre contoured. Use with 3.5mm Cortical Screws.Used as a compression plate for smaller bones or metatarsals and metacarpals in larger breeds. The pre-contoured shape of the plate adds to the strengths even though it remains dimensionally thin. Compression is applied by eccentric positioning of the screw against the side of the screw hole furthest from the fracture line.The relative thinness of this plate facilitates closure of soft tissue over the plate and due to the tubular contoured plate design it lends itself well to high torsional and bending strengths. Stainless Steel ISO 5832-1

Quarter Tubular - Dimensions are 7mm wide, 1.1mm pre contoured. Use with 2.7mm Cortical Screws.

2.0mm Mini Plate Straight TubularOrder Code No. of Holes Length mm RRPMPT-20-03 3 17 £22.62MPT-20-04 4 23 £24.23MPT-20-05 5 29 £25.85MPT-20-06 6 35 £27.46MPT-20-07 7 41 £29.07MPT-20-08 8 47 £30.45

2.0mm Straight Tubular Compression Plate - Dimensions are 5mm wide, 1.1mm thick pre-contoured. Use with 2.0mm Cortical Screws.The relative thickness of this plate facilitates closure of soft tissue over the plate and due to the tubular contoured plate design it lends itself well to high torsional and bending strengths.

110

UK manufactured

2.7mm Quarter Tubular

3.5mm One Third Tubular

QTP-27-03

QTP-27-04

QTP-27-05

QTP-27-06

QTP-27-07

QTP-27-08

TTP-35-02

TTP-35-03

TTP-35-04

TTP-35-05

TTP-35-06

TTP-35-07

TTP-35-08

TTP-35-09

TTP-35-10

TTP-35-11

MPT-20-08

MPT-20-07

MPT-20-06

MPT-20-05

MPT-20-04

MPT-20-03

2.0mm Mini Plate Straight Tubular

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

111

www.n2-uk.com

Order Code Length No. of Holes RRPRCP-27-05 40 5 £30.69RCP-27-06 48 6 £35.54RCP-27-07 56 7 £37.96RCP-27-08 64 8 £40.38RCP-27-09 72 9 £42.81RCP-27-10 80 10 £45.23RCP-27-11 88 11 £50.07RCP-27-12 96 12 £54.93

2.7mm Reconstruction Plates

Order Code Length No. of Holes RRPRCP-35-05 58 5 £38.77RCP-35-06 70 6 £43.62RCP-35-07 82 7 £48.46RCP-35-08 94 8 £53.31RCP-35-09 106 9 £58.15RCP-35-10 118 10 £67.85RCP-35-11 130 11 £81.38RCP-35-12 142 12 £84.00


112

2.7mm Pre-contoured 8mm X 2mm Thick Notched 3.5mm Pre-contoured 8mm X 2.5mm Thick NotchedSpecifically designed for easy three dimensional contouring but not exceeding more than 15 degrees in any one direction. The plate’s stiffness is reduced by bending and if a strong curvature is needed, a pre contoured plate should be ordered. The longer plate lengths can be cut to size and we offer intermediate odd hole sizes on the 2.7mm and 3.5mm range.Commonly used for stabilization of pelvic fractures.These plates are not designed to withstand the forces of weight bearing.All Plates are made from Stainless Steel ISO 5832-1

UK manufactured

RC

P-27

-05

RC

P-27

-06

RC

P-27

-07

RC

P-27

-08

RC

P-27

-09

RC

P-27

-10

RC

P-27

-11

RC

P-27

-12



RC

P-35

-12

RC

P-35

-11

RC

P-35

-10

RC

P-35

-09

RC

P-35

-08

RC

P-35

-07

RC

P-35

-06

RC

P-35

-05

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

113

www.n2-uk.com

CM

P-27

-25-

150

Order Code Length No. of Holes Screw Size RRPCUT-15-20-100 100mm 20 1.5 £40.49CUT-15-30-120 120mm 30 1.5 £40.38CUT-15-27-120 120mm 27 1.5 £40.38CUT-20-27-150 150mm 27 2.0 £40.38CUT-20-30-150 150mm 30 2.0 £40.38CUT-24-27-150 150mm 27 2.4 £40.38CUT-24-24-150 150mm 24 2.4 £40.38CUT-27-22-150 150mm 22 2.7 £40.38CUT-27-25-150 150mm 25 2.7 £40.38

Malleable PlatesOrder Code Length No. of Holes Screw Size RRPCMP-20-30-150 150mm 30 2.0 £56.54CMP-24-27-150 150mm 27 2.4 £56.54CMP-27-25-150 150mm 25 2.7 £56.54

Cuttable Plates

Veterinary Cuttable plates are used for internal fixation of long bone fractures in small dogs and cats and for smaller fracture procedures in larger breeds of dogs. Case studies have also been successful and widely accepted in repair of the metacarpals and metatarsals. The Grooved Styled plates lends itself well to three dimensional contouring like a reconstruction plate. Both styles of Plates can be cropped to size or stacked on top of each other for added strength. Each individual size plate has equal pitch between screw holes for easy alignment.Suited to small sized screws. All Plates are made from Stainless Steel ISO 5832-1

Order Code Length No. of Holes Screw Size RRPCUT-15-30-120B 120mm 30 1.5 £41.43CUT-15-27-120B 120mm 27 1.5 £41.43CUT-20-30-150B 150mm 30 2.0 £41.43CUT-20-27-150B 150mm 27 2.0 £41.43CUT-24-27-150B 150mm 27 2.4 £41.43CUT-24-24-150B 150mm 24 2.4 £41.43CUT-27-25-150B 150mm 25 2.7 £41.43CUT-27-22-150B 150mm 22 2.7 £41.43CUT-24-54-300 300mm 54 2.4 £68.25CUT-27-50-300 300mm 50 2.7 £68.25

Broad Cuttable Plates

CM

P-24

-27-

150

CM

P-20

-30-

150

114

UK manufactured

Cuttable/Malleable Plates

CU

T-27

-50-

300

CU

T-15

-30-

120

CU

T-20

-30-

150

CU

T-24

-24-

150B

CU

T-24

-27-

150B

CU

T-24

-24-

150

CU

T-24

-27-

150

CU

T-20

-27-

150B

CU

T-20

-30-

150B

CU

T-20

-27-

150

CU

T-27

-22-

150B

CU

T-27

-25-

150B

CU

T-27

-22-

150

CU

T-24

-54-

300

CU

T-27

-25-

150

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

CU

T-15

-27-

120B

CU

T-15

-30-

120B

CU

T-15

-27-

120

115

www.n2-uk.com

Order Code No. of Holes Length mm RRPDRP-20-04-T 4 18 £14.13DRP-20-05-T 5 24 £14.13DRP-20-04-L 4 18 £14.13DRP-20-04-R 4 18 £14.13DRP-20-04-OL 4 18 £14.13DRP-20-04-OR 4 18 £14.13

2.0mm Distal Plates1.5mm Thick Plate.An economical Plate can be used with 2.0mm Cortical Screws or2.0mm Sherman Screws.All Plates are made from Stainless Steel ISO 5832-1

Order Code No. of Holes Length mm RRPDRP-27-05-T 5 32 £15.75DRP-27-06-T 6 39 £15.75DRP-27-05-L 5 32 £15.75DRP-27-05-R 5 32 £15.75DRP-27-05-OL 5 32 £15.75DRP-27-05-OR 5 32 £15.75

2.7mm Distal Plates2mm Thick Plate.An economical Plate can be used with 2.7mm Cortical Screws or2.7mm (2.9mm) Sherman Screws.All Plates are made from Stainless Steel ISO 5832-1

Order Code No. of Holes Length mm RRPDRP-35-06-T 6 55 £28.27DRP-35-07-T 7 77 £28.27DRP-35-08-T 8 77 £28.27

3.5 T-Plates Round Hole3mm Thick Plate.An economical Plate can be used with 3.5mm Cortical Screws or9/64” Sherman Screws.All Plates are made from Stainless Steel ISO 5832-1

Order Code No. of Holes Length mm RRPH-15-4 4 8.9 £14.96H-20-4 4 11.7 £20.48

H-Plates

Order Code No. of Holes Length mm RRPACE-20-04-0 4 19 £32.31ACE-20-04-1 4 27 £32.31ACE-24-04-6 4 21 £32.31ACE-27-06-2 6 33 £32.31ACE-27-06-3 6 34 £32.31ACE-35-06-4 6 42 £40.38ACE-35-06-5 6 46 £40.38

Acetabular PlatesThese plates were specifically designed for the stabilisation of acetabular fractures in dogs. The pre-contoured shape simplifies the contouring to the dorsal acetabular surface which facilitates accurate reduction of acetabular fractures.Seven sizes to suit screw ranges from 2.0mm/2.4mm/2.7mm and 3.5mm. Holes are standard round.Stainless Steel ISO 5832-1

116

UK manufactured

DR

P-20-04-T

DR

P-20-05-T

DR

P-20-04-L

DR

P-20-04-R

DR

P-20-04-OL

DR

P-20-04-OR

2.0mm Distal Plates

H-15-4

H-20-4

H-Plates

DR

P-27-05-OR

DR

P-27-05-R

DR

P-27-05-T

DR

P-27-05-L

DR

P-27-06-T

DR

P-27-05-OL

2.7mm Distal Plates

DR

P-35-07-T

DR

P-35-06-T

DR

P-35-08-T

3.5 T-Plates Round Hole

ACE-35-06-5

ACE-35-06-4

ACE-27-06-3

ACE-27-06-2

ACE-24-04-6

ACE-20-04-1

ACE-20-04-0

Acetabular Plates200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

117

www.n2-uk.com

Order Code No. of Holes Length mm RRPHTP-15-4-3 4 + 3 31 £29.09HTP-15-5-3 5 + 3 34 £24.15HTP-15-6-2 6 + 2 34 £25.85HTP-15-6-3 6 + 3 34 £24.15HTP-15-9-4 9 + 4 50 £32.55HTP-20-4-2 4 + 2 35 £25.85HTP-20-4-3X 4 + 3 42 £25.85HTP-20-4-3XL 4 + 3 49 £25.85HTP-20-5-2 5 + 2 49 £25.86HTP-20-5-3 5 + 3 49 £25.85HTP-20-6-2 6 + 2 49 £25.85HTP-20-7-3 7 + 3 63 £25.85HTP-20-8-2 8 + 2 63 £27.70HTP-20-9-4 9 + 4 50 £34.65HTP-24-5-2 5 + 2 52 £25.85HTP-24-5-3 5 + 3 57 £30.45HTP-24-7-2 7 + 2 71 £25.85HTP-24-9-4 9 + 4 81 £36.75HTP-27-5-2 5 + 2 65 £30.69HTP-27-5-3 5 + 3 68 £30.69HTP-27-5-3 5 + 3 78 £30.69HTP-27-7-2 7 + 2 85 £30.69HTP-27-9-2 9 + 2 105 £35.01HTP-35-5-3 5 + 3 78 £30.45

Hybrid T-Plates

These comprehensive range of Plate designs helps overcome the limitations for screw placement in distal radius fracturesThe plate head has smaller diameter round holes and are spaced closer together than the plate shaft and anatomically contoured the length of the plate.To suit screw ranges from1.5mm/2.0mm/2.4mm/2.7mm and 3.5mm. Head Holes are standardRound with shaft.compression Stainless Steel ISO 5832-1

118

UK manufactured

HTP-20-4-3XL

HTP-20-5-3

HTP-20-7-3

HTP-20-8-2

HTP-20-9-4

HTP-24-9-45-2

HTP-20-4-3X

HTP-20-6-2

HTP-15-9-4

Hybrid T-PlatesHTP-15-5-3

HTP-15-6-2

HTP-15-6-3

HTP-20-4-2

HTP-24-5-3

HTP-27-5-2

HTP-27-5-3 (68)

HTP-24-7-2

HTP-27-9-2

HTP-27-7-2

HTP-24-5-2

HTP-27-5-3 (78)

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

119

www.n2-uk.com

Order CodeScrew Size Degrees RRP

PAN-35-45-135L 3.5 / 4.5 135 ˚ Left £115.50PAN-35-45-135R 3.5 / 4.5 135 ˚ Right £115.50PAN-27-35-135L 2.7 / 3.5 135 ˚ Left £79.15PAN-27-35-135R 2.7 / 3.5 135 ˚ Right £79.15PAN-27-35-135LS 2.7 / 3.5 135 ˚ Left Slot £85.45PAN-27-35-135RS 2.7 / 3.5 135 ˚ Right Slot £85.45PAN-27-35-135LX SHORT 2.7 / 3.5 135 ˚ Left £79.15PAN-27-35-135RX SHORT 2.7 / 3.5 135 ˚ Right £79.15PAN-27-35-135LSX SHORT 2.7 / 3.5 135 ˚ Left Slot £85.45PAN-27-35-135RSX SHORT 2.7 / 3.5 135 ˚ Right Slot £85.45PAN-20-27-135L 2.7 / 3.5 135 ˚ Left £79.15PAN-20-27-135R 2.0 / 2.7 135 ˚ Right £79.15PAN-20-27-135RS 2.0 / 2.7 135 ˚ Right Slot £85.45PAN-20-27-135LS 2.7 / 3.5 135 ˚ Left Slot £85.45PAN-27-35-135L-T4 2.7 / 3.5 135 ˚ Left Slot £85.45PAN-27-35-135LSX 2.7 / 3.5 135 ˚ Left Slot £85.45PAN-27-35-135RSX 2.7 / 3.5 135 ˚ Right Slot £85.45PAN-20-27-120R-T4 2.0/2.7 120 ˚ Right 85.45PAN-20-27-135L-T4 2.0 / 2.7 135 ˚ Left 85.45PAN-20-27-135R-T4 2.0 / 2.7 135 ˚ Right 85.45PAN-20-27-120L 2.0 / 2.7 120 ˚ Left £79.15PAN-20-27-120LS 2.0 / 2.7 120 ˚ Left Slot £85.45PAN-20-27-120R 2.0 / 2.7 120 ˚ Right £79.15PAN-20-27-120RS 2.0 / 2.7 120 ˚ Right Slot £85.45

Pantarsal Arthrodesis Plates

120

Arthrodesis is an elective surgical procedure to eliminate motion in a joint by providing a bony fusion. The procedure is used for several specific purposes: to relieve pain; to provide stability; to overcome postural deformity resulting from neurologic deficit; and to halt advancing disease.Designed in Canine (135°) and in Feline (120°) for a functional position.All Plates are made from Stainless Steel ISO 5832-1

UK manufactured Pantarsal Arthrodesis Plates

PAN-20-27-120LS

PAN-20-27-120L

PAN-20-27-135LS

PAN-20-27-135L

PAN-27-35-135LSX

PAN-27-35-135LX

PAN-27-35-135LS

PAN-27-35-135L

Plates are shown left hand

PAN-35-45-135L

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

121

www.n2-uk.com

Order Code Screw Size RRPCPA-27-35-140 2.7 / 3.5 £105.00CPA-20-27-140 2.0 / 2.7 £89.25

Canine Cranial Pantarsal Arthrodesis Plate

122

3.5mm/2.7mm Pre contoured to 135° to reduce stress risers. Profile 12mm X 4 MM for added strength. 140° 2.0/2.4/2.7mm Pre contoured to 140° to reduce stress risers. Profile 8mm X 2.5MM for added strength. 140°An improved plate with increased screw placement angulation in elliptical slots similar in design of Limited contact slots. The oblique undercut for improved range of inclination either side of the bend greatly improves screw placement to secure the talus. New range has the added advantage of reduce profile height to aid closure without affecting torsional strength.Larger compression slots in the Tibia than the metatarsal and tapered to suit. All Plates are made from Stainless Steel ISO 5832-1

Order Code Screw Size RRPCPA-20-20-120 2.0 / 2.0 £79.15CPA-20-24-120 2.0 / 2.4 £79.15CPA-20-27-120 2.0 / 2.7 £79.15

Feline Pantarsal Plate Cranial Position

2.0mm/2.0mm Dimensions are 5mm wide by 2mm thick, tapering to 1.5mm pre bent at 120° to reduce stress risers.2.0mm/2.4mm Dimensions are 6.5mm wide by 2mm thick, tapering to 1.5mm pre bent at 120° to reduce stress risers.2.0mm/2.0mm Dimensions are 8mm wide by 2mm thick, tapering to 1.5mm pre bent at 120° to reduce stress risers.Larger compression slots in the Tibia than the metatarsal and tapered to suit. All Plates are made from Stainless Steel ISO 5832-1

UK manufactured Canine Cranial 140° Pantarsal Arthrodesis Plates

Feline Cranial 120°Pantarsal Arthrodesis Plates

2.0/2.7 Canine

2.7/3.5 Canine

2.0/2.7 Feline

2.0/2.4 Feline

2.0/2.0 Feline CPA-20-20-120

CPA-20-24-120

CPA-20-27-120

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

123

www.n2-uk.com

Order Code Length mm Ø Screw mm RRPPCA-27-35 65 2.7/3.5 £43.62PCA-20-24-27 51 2.0/2.4/2.7 £45.23PCA-15-20 35 1.5/2.0 £46.85

Partial Carpal Arthrodesis Plate

Order Code Length mm Ø Screw mm RRPPAD-15-20 53 1.5/20 £46.44PAD-15-20L 61 1.5/2.0 £48.46PAD-20-20 57 2.0/2.0 £48.46PAD-20-20L 67 2.0/2.0 £50.48PAD-20-27 75 2.0/2.7 £50.48PAD-20-27L 90 2.0/2.7 £52.50PAD-20-27-PB 75 pre-bent 2.0/2.7 £63.00PAD-24-27L 95 2.4/2.7 £54.52PAD-27-35 101 2.7/3.5 £54.52PAD-27-35L 118 2.7/3.5 £54.52PAD-27-35-PB 101 pre-bent 2.7/3.5 £63.00PAD-27-35L-PB 118 pre-bent 2.7/3.5 £63.00PAD-35-35 141 3.5/3.5 £56.54PAD-35-35L 154 3.5/3.5 £60.57PAD-35-45 185 3.5/4.5 £117.12

Pancarpal Arthrodesis Plates DCP Style

Order Code Length mm Ø Screw mm RRPPAR-20-27 75 2.0/2.7 £38.77PAR-27-35 101 2.7/3.5 £38.77PAR-27-35L 118 2.7/3.5 £38.77PAR-35-35 141 3.5/3.5 £38.77

Pancarpal Arthrodesis Plates Round Holes

Order Code Description Length mm Ø Screw mm RRPLPA-35-DCP 3.5mm Locking and DCP 154 3.5 Lock+3.5 £120.75LPA-2735-DCP Mix of 2.7/3.5mm Locking and DCP’s 118 2.7/3.5 Lock+2.7/3.5 £120.75

Locking Pancarpal Arthrodesis

124

Is used to treat subluxations or luxations of the middle carpal and carpometacarpal joints which are associated with disruption of the accessory carpal ligaments, palmar fibrocartilage and palmar ligaments.Sizes using 1.5mm Cortical screws to a heavy duty 4.5mm Cortical Screw. Available in round hole versions and Compression slots.All Plates are made from Stainless Steel ISO 5832-1

Is used to treat subluxation of the carpometacarpal joint occurring without disruption and displacement of the accessory carpal and ulna carpal bones.Three sizes available with a 5 degree incline on the head of the reduced sized head.All Plates are made from Stainless Steel ISO 5832-1

UK manufactured PCA-15-20 PCA-27-35PCA-20-24-27

PAD-15-20

PAD-15-20L

PAD-20-20

PAD-20-20L

PAR-20-27

PAD-20-27

PAD-20-27L

PAR-27-35

PAD-27-35

PAR-27-35L

PAD-27-35L

LPA-2735-DCP

PAR-35-35

PAD-35-35

PAD-35-35L

LPA-35-DCP

PAD-35-45

Pancarpal Arthrodesis

Plates

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

125

www.n2-uk.com

Order Code No. of Holes Length mm RRPLCP-20-04 4 25 £33.93LCP-20-05 5 31 £37.15LCP-20-06 6 37 £40.38LCP-20-07 7 43 £43.62LCP-20-08 8 49 £46.85LCP-20-09 9 55 £50.07LCP-20-10 10 61 £53.31LCP-20-11 11 67 £56.54LCP-20-12 12 73 £59.77LCP-20-13 13 79 £62.84LCP-20-14 14 85 £65.91

2.0mm Limited Contact Plate

Order Code No. of Holes Length mm RRPLCP-24-04 4 38 £33.93LCP-24-05 5 46 £37.15LCP-24-06 6 54 £40.38LCP-24-07 7 62 £43.62LCP-24-08 8 70 £46.85LCP-24-09 9 78 £50.07LCP-24-10 10 86 £53.31LCP-24-11 11 94 £56.54LCP-24-12 12 102 £59.77

2.4mm Limited Contact PlateDimensions are 7mm X 2mm + Plate Length/No. of Slots.These plates are used in the same manner as the DCP, but have grooves (undercuts) in the plate that allow for more uniform stiffness throughout the plate (reduced stiffness between the screw holes). These undercuts allow for easier bending of the plate between the screw holes when contouring. They also decrease the chance of plate failure because forces are more evenly distributed throughout the plate. In addition, they allow cells and blood supply to infiltrate the area more easily to aid in healing. Unlike the standard DCP screw holes, the screw holes in LC-DCPs are designed to compress in both directions.By design, the screw holes have an oblique undercut for improved range of inclination. Lateral undercuts in the Plate profile allow for bone formation at the plate side of the periosteal surface.All Plates are made from Stainless Steel ISO 5832-1

Dimensions are 5.3mm X 1.5mmEnd Hole is fixed round HoleSingle Tapered end for submuscular plate applicationAll Plates are made from Stainless Steel ISO 5832-1

126

UK manufactured

Limited Contact Plate 2.0mm

LCP-20-11

LCP-20-10

LCP-20-12

LCP-20-09

LCP-20-13

LCP-20-04

LCP-20-14

LCP-20-14

LCP-20-05

LCP-20-08

LCP-20-07

LCP-20-062.4mm Limited Contact Plate

LCP-24-08

LCP-24-09

LCP-24-10

LCP-24-11

LCP-24-12

LCP-24-07

LCP-24-04

LCP-24-05

LCP-24-06

(Underside Shown)

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

127

www.n2-uk.com

Order Code No. of Holes Length mm RRPLCP-27-02 2 26 £30.69LCP-27-03 3 35 £32.32LCP-27-04 4 44 £33.93LCP-27-05 5 53 £37.15LCP-27-06 6 62 £40.38LCP-27-07 7 71 £43.62LCP-27-08 8 80 £46.85LCP-27-09 9 89 £50.07LCP-27-10 10 98 £53.31LCP-27-11 11 107 £56.54LCP-27-12 12 116 £59.77LCP-27-13 13 125 £63.00LCP-27-14 14 134 £66.23LCP-27-15 15 143 £69.46LCP-27-16 16 152 £72.69LCP-27-18 18 161 £75.93


128

Dimensions are 8mm X 2.5mm + Plate Length/No. of Slots.These plates are used in the same manner as the DCP, but have grooves (undercuts) in the plate that allow for more uniform stiffness throughout the plate (reduced stiffness between the screw holes). These undercuts allow for easier bending of the plate between the screw holes when contouring. They also decrease the chance of plate failure because forces are more evenly distributed throughout the plate. In addition, they allow cells and blood supply to infiltrate the area more easily to aid in healing. Unlike the standard DCP screw holes, the screw holes in LC-DCPs are designed to compress in both directions.By design, the screw holes have an oblique undercut for improved range of inclination. Lateral undercuts in the Plate profile allow for bone formation at the plate side of the periosteal surface.All Plates are made from Stainless Steel ISO 5832-1

UK manufactured


200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

LCP-

27-1

2

LCP-

27-1

3

LCP-

27-1

4

LCP-

27-1

5

LCP-

27-1

6

LCP-

27-0

9

LCP-

27-1

0

LCP-

27-1

1

LCP-

27-0

7

LCP-

27-0

8

LCP-

27-0

5

LCP-

27-0

6

LCP-

27-1

7

LCP-

27-0

4

LCP-

27-0

3

LCP-

27-0

2

129

www.n2-uk.com130

Order Code No. of Holes Length mm RRPLCP-35-02 2 30 £27.46LCP-35-03 3 43 £30.69LCP-35-04 4 56 £33.93LCP-35-05 5 69 £37.15LCP-35-06 6 82 £40.38LCP-35-07 7 95 £43.62LCP-35-08 8 108 £46.85LCP-35-09 9 121 £50.07LCP-35-10 10 134 £53.31LCP-35-11 11 147 £56.54LCP-35-12 12 160 £58.15LCP-35-13 13 173 £61.38LCP-35-14 14 186 £64.62LCP-35-15 15 199 £67.85LCP-35-16 16 212 £71.07

3.5mm Limited Contact Plate11mm X 3.3mm Pre Contoured Profile + Plate Length/No. of Slots.These plates are used in the same manner as the DCP, but have grooves (undercuts) in the plate that allow for more uniform stiffness throughout the plate (reduced stiffness between the screw holes). These undercuts allow for easier bending of the plate between the screw holes when contouring. They also decrease the chance of plate failure because forces are more evenly distributed throughout the plate. In addition, they allow cells and blood supply to infiltrate the area more easily to aid in healing. Unlike the standard DCP screw holes, the screw holes in LC-DCPs are designed to compress in both directions.By design, the screw holes have an oblique undercut for improved range of inclination. Lateral undercuts in the Plate profile allow for bone formation at the plate side of the periosteal surface.All Plates are made from Stainless Steel ISO 5832-1

UK manufactured


200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

LCP-

35-1

1

LCP-

35-1

0

LCP-

35-0

9

LCP-

35-0

8

LCP-

35-0

7

LCP-

35-1

6

LCP-

35-1

5

LCP-

35-1

4

LCP-

35-1

3

LCP-

35-1

2LC

P-35

-06

LCP-

35-0

5

LCP-

35-0

4

LCP-

35-0

3

LCP-

35-0

2

131

www.n2-uk.com

Order Code No. of Holes Length mm RRPLCB-35-04 4 56 £43.62LCB-35-05 5 69 £46.85LCB-35-06 6 82 £50.07LCB-35-07 7 95 £53.31LCB-35-08 8 108 £56.54LCB-35-09 9 121 £59.77LCB-35-10 10 134 £63.00LCB-35-11 11 147 £66.23LCB-35-12 12 160 £69.46LCB-35-13 13 173 £72.69LCB-35-14 14 186 £75.93LCB-35-14 15 199 £79.15LCB-35-16 16 212 £82.38

3.5mm Broad Limited Contact Plate

132

12mm X 4mm Pre Contoured Profile + Plate Length/No. of Slots.These plates are used in the same manner as the DCP, but have grooves (undercuts) in the plate that allow for more uniform stiffness throughout the plate (reduced stiffness between the screw holes). These undercuts allow for easier bending of the plate between the screw holes when contouring. They also decrease the chance of plate failure because forces are more evenly distributed throughout the plate. In addition, they allow cells and blood supply to infiltrate the area more easily to aid in healing. Unlike the standard DCP screw holes, the screw holes in LC-DCPs are designed to compress in both directions.By design, the screw holes have an oblique undercut for improved range of inclination. Lateral undercuts in the Plate profile allow for bone formation at the plate side of the periosteal surface.All Plates are made from Stainless Steel ISO 5832-1

UK manufactured

3.5mm Broad Limited Contact Plate

LCB-

35-1

0

LCB-

35-0

9

LCB-

35-0

8

LCB-

35-0

7

LCB-

35-1

1

LCB-

35-1

4

LCB-

35-1

3

LCB-

35-1

2

LCB-

35-1

5

LCB-

35-1

6

LCB-

35-0

4

LCB-

35-0

5

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

LCB-

35-0

6

133

www.n2-uk.com

Order Code Length mm RRPSUP-20-50-R 50 £46.85SUP-20-50-L 50 £46.85SUP-20-120-R 120 £80.77SUP-20-120-L 120 £80.77SUP-24-62-R 62 £63.00SUP-24-62-L 62 £63.00SUP-27-69-L 69 £63.00SUP-27-69-R 69 £63.00SUP-35-135-NL 135 £101.77SUP-35-135-NR 135 £101.77SUP-35-135-BL 135 £121.15SUP-35-135-BR 135 £121.15SUP-35-173-BL 173 £121.15SUP-35-173-BR 173 £121.15N = Narrow B = Broad

Supracondylar and Osteotomy (Distal Femur) Plates

Order Code Length mm RRPSCO-20-50-R 50 £63.00SCO-20-50-L 50 £63.00SCO-24-55-R 55 £63.00SCO-24-55-L 55 £63.00SCO-27-61-R 61 £63.00SCO-27-61-L 61 £63.00SCO-35-86-R 86 £95.31SCO-35-86-L 86 £95.31SCO-35B-88-R 88 £121.15SCO-35B-88-L 88 £121.15

Supracondylar Osteotomy Plates

Order Code Length mm RRPIAP-20-27 59 £80.77IAP-27-35 86 £80.77

Intertarsal Arthrodesis Plate

Available in screw sizes 2.0mm to 3.5mm with various lengths to suit. Multiple compression slots and pre-contoured for convenience. If further contouring is required it is recommended to use a bending template as an aid.Plates are not manufactured from cast or forged material.All Plates are made from Stainless Steel ISO 5832-1.

Designed to fuse the bones of the calcaneoquartal or tarsometatarsal joints in a functional position due to injury of the plantar tarsal fibrocartilage.All Plates are made from Stainless Steel ISO 5832-1

134

UK manufactured

Supracondylar and Osteotomy Plates

IAP-20-27

Intertarsal Arthrodesis Plate

IAP-27-35

SC0-35-86-R

SCO-35B-88-R

SUP-35-173-BR(3MM)

SUP-35-135-NR(3MM)

SUP-35-135-BR(4.5MM)

SCO-27-61-R

SUP-27-69-R

SCO-24-55-R

SUP-24-62-R

SCO-20-50-R

SUP-20-50-R

SUP-20-120-R *Plates are shown right hand

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

135

www.n2-uk.com

Order Code No. of Holes Lengths mm RRPRHP-35-02 2 22 £11.31RHP-35-03 3 34 £12.12RHP-35-04 4 46 £12.93RHP-35-05 5 58 £14.54RHP-35-06 6 70 £16.15RHP-35-07 7 82 £17.77RHP-35-08 8 94 £19.38RHP-35-09 9 106 £21.00RHP-35-10 10 118 £22.62RHP-35-04-XL 4 52 £12.93RHP-35-05-XL 5 64 £14.54RHP-35-06-XL 6 76 £16.15RHP-35-07-XL 7 88 £17.77RHP-35-08-XL 8 100 £19.38RHP-35-09-XL 9 118 £21.00RHP-35-10-XL 10 130 £22.62

3.5mm Round Hole Plate3.5mm Plate are 10.2mm wide, 3.2mm thick Pre contoured Profile. Use with 3.5mm Cortical Screws or 9/64”Sherman Screws.Non Compression Plate. An economical range of Bone Plates pre-contoured for secure fixation. All Plates are made from Stainless Steel ISO 5832-1

Order Code No. of Holes Lengths mm RRPRHP-27-02 2 12 £9.69RHP-27-03 3 18 £10.50RHP-27-04 4 24 £11.31RHP-27-05 5 30 £12.93RHP-27-06 6 36 £14.54RHP-27-07 7 42 £16.15RHP-27-08 8 48 £17.77RHP-27-02-XL 2 15 £9.69RHP-27-03-XL 3 21 £10.50RHP-27-04-XL 4 27 £11.31RHP-27-05-XL 5 33 £12.93RHP-27-06-XL 6 39 £14.54RHP-27-07-XL 7 45 £16.15RHP-27-08-XL 8 51 £17.77

2.7mm Round Hole Plate2.7mm Plate is 6mm wide, 2mm thick. Use with 2.7mm Cortical Screws/Sherman Screws.Non Compression Plate. An economical range of Bone Plates pre-contoured for secure fixation. All Plates are made from Stainless Steel ISO 5832-1

Order Code No. of Holes Lengths mm RRPRHP-20-02 2 10 £9.69RHP-20-03 3 15 £10.50RHP-20-04 4 20 £11.31RHP-20-05 5 25 £12.93RHP-20-06 6 30 £14.54RHP-20-07 7 35 £16.15RHP-20-08 8 40 £17.77RHP-20-02-XL 2 13 £9.69RHP-20-03-XL 3 18 £10.50RHP-20-04-XL 4 23 £11.31RHP-20-05-XL 5 28 £12.93RHP-20-06-XL 6 33 £14.54RHP-20-07-XL 7 38 £16.15RHP-20-08-XL 8 43 £17.77

2.0mm Round Hole Plate2.0mm Plate is 5mm wide, 1.5mm thick. Use with 2.0mm Cortical Screws/Sherman Screws.Non Compression Plate. An economical range of Bone Plates pre-contoured for secure fixation. All Plates are made from Stainless Steel ISO 5832-1

136

UK manufactured 3.5mm Round Hole PlateRHP-35-10-XL

RHP-35-10

RHP-35-09-XL

RHP-35-09

RHP-35-08-XL

RHP-35-08

RHP-35-07-XL

RHP-35-07

RHP-35-06-XL

RHP-35-06

RHP-35-05-XL

RHP-35-05

RHP-35-04-XL

RHP-35-04

RHP-35-03

RHP-35-02

RHP-20-02-XL

RHP-20-03

RHP-20-03-XL

RHP-20-04

RHP-20-04-XL

RHP-20-05

RHP-20-05-XL

RHP-20-06

RHP-20-06-XL

RHP-20-07

RHP-20-07-XL

RHP-20-08

RHP-20-08-XL

RHP-27-02-XL

RHP-27-03-XL

RHP-27-04

RHP-27-04-XL

RHP-27-05

RHP-27-05-XL

RHP-27-06

RHP-27-06-XL

RHP-27-07

RHP-27-07-XL

RHP-27-08

RHP-27-08-XL

2.0mm Round Hole Plate

2.7mm Round Hole Plate

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

137

www.n2-uk.com

Order Code No. of Holes Length mm RRPHDR-35-08 8 104 £19.38HDR-35-09 9 117 £21.00HDR-35-10 10 130 £22.62HDR-35-11 11 143 £24.23HDR-35-12 12 156 £25.85HDR-35-13 13 169 £27.46HDR-35-14 14 182 £29.07HDR-35-15 15 195 £30.69

3.5mm Heavy Duty Round Hole Plate

Order Code No. of Holes Length mm RRPHDR-27-07 7 44 £19.38HDR-27-08 8 50 £21.00HDR-27-09 9 56 £22.62HDR-27-10 10 62 £24.23HDR-27-11 11 68 £25.85HDR-27-12 12 74 £27.46HDR-27-07-XL 7 50 £19.38HDR-27-08-XL 8 56 £21.00HDR-27-09-XL 9 62 £22.62HDR-27-10-XL 10 68 £24.23HDR-27-11-XL 11 74 £25.85HDR-27-12-XL 12 80 £27.46


Heavy Duty Plates are 11.5mm wide, 4mm thick Pre contoured Profile. Use with 3.5mm Cortical Screws/9/64”Sherman Screws.Non Compression Plate. An economical range of Bone Plates pre-contoured for secure fixation.All Plates are made from Stainless Steel ISO 5832-1

Plates are 8mm wide, 2.0mm thick Pre contoured Profile. Use with 2.7mm Cortical Screws /Sherman Screws.Non Compression Plate. An economical range of Bone Plates pre-contoured for secure fixation.All Plates are made from Stainless Steel ISO 5832-1

138

UK manufactured



HD

R-2

7-12

-XL

HD

R-2

7-12

HD

R-2

7-11

-XL

HD

R-2

7-11

HD

R-2

7-10

-XL

HD

R-2

7-09

-XL

HD

R-2

7-10

HD

R-2

7-09

HD

R-2

7-08

XL

HD

R-2

7-08

HD

R-2

7-07

-XL

HD

R-2

7-07

HD

R-3

5-08

HD

R-3

5-15

HD

R-3

5-14

HD

R-3

5-13

HD

R-3

5-12

HD

R-3

5-11

HD

R-3

5-10

HD

R-3

5-09

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

139

www.n2-uk.com

Order Code Ø Screw mm RRPDEL-20-L 2.0 £35.70DEL-20-R 2.0 £35.70DEL-24-L 2.4 £37.15DEL-24-R 2.4 £37.15DEL-27-L 2.7 £37.15DEL-27-R 2.7 £37.15DEL-27-LB 2.7 £41.58DEL-27-RB 2.7 £41.58DEL-35-L 3.5 £40.38DEL-35-R 3.5 £40.38DEL-35-BR 3.5 £46.85DEL-35-BL 3.5 £46.85

TPLO Delta ‘Style’ PlatesTibial Plateau Levelling OsteotomyPre Contoured TPLO Triangular shaped Plates Available in six sizes (2.0mm, 2.4mm, 2.7mm, 2.7mm Broad, 3.5mm and 3.5mm Broad) and both Left and Right Hands.Stainless Steel ISO 5832-1For Evolox® selection of Delta plates please see page 172

Order Code No. of Holes Length mm RRPTPO35-SM 4 36 £35.00TPO35-SML30 4 36 £38.00TPO35-SMR30 4 36 £38.00TPO35-LG 4 48 £40.00TPO35-LGL30 4 48 £43.00TPO35-LGR30 4 48 £43.00

Available flat or pre-bent at 30 degrees

TPO EQ

140

UK manufactured

TPLO Delta ‘Style’ Plates

DEL-35-BL

TPO EQTPO35-SM

TPO35-SML30

TPO35-SMR30

TPO35-LG

TPO35-LGL30

TPO35-LGR30

DEL-35-L

DEL-27-L

DEL-24-L

DEL-20-L

DEL-27-LB

DEL-35-BR

DEL-35-R

DEL-27-R

DEL-24-R

DEL-20-R

DEL-27-RB

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

141

www.n2-uk.com

Order Code No. of Holes Length mm RRPSLO-20-L 6 26.5 £38.77SLO-20-R 6 26.5 £38.77SLO-24-L 6 35 £38.77SLO-24-R 6 35 £38.77SLO-27-L 6 41 £38.77SLO-27-R 6 41 £38.77SLO-35-L 6 64 £46.85SLO-35-R 6 64 £46.85SLO-35-PCL 6 64 £56.54SLO-35-PCR 6 64 £56.54

TPLO (Slocum style)Tibial Plateau Levelling OsteotomyAvailable in six sizes (2.0mm, 2.4mm, 2.7mm, 3.5mm, 3.5mm Pre-contoured and 3.5mm broad) and both Left and Right Hands.Pre-Contoured and a notched underside to aid final contouring.Not from Cast or ForgingAll Plates are made from Stainless Steel ISO 5832-1

Order Code No. of Holes Length mm RRPTPL-15-15-31 4 + 3 31 £25.85TPL-20-20-26 3 + 3 26 £22.62TPL-24-24-34 3 + 3 34 £26.65TPL-24-24-41 4 + 3 41 £26.65TPL-24-24-41G 3 + 3 41 £26.65TPL-27-27-39 3 + 3 39 £26.65TPL-27-35-39 3 + 3 39 £26.65TPL-27-35-45 3 + 3 45 £29.88TPL-35-35-55 3 + 3 55 £37.96TPL-35-35-57 3 + 3 57 £37.96TPL-35-35-62 3 + 3 62 £37.96TPL-35-35-78 4 + 3 78 £37.96TPL-35-35-80 4 + 3 80 £40.38TPL-35-45-80 4 + 3 80 £40.38TPL-35-45/65-80 4 + 3 80 £44.43TPL-45/65-90-30 4 + 3 90 £72.69TPL-45/65-90-45 4 + 3 90 £72.69

TPLO Compression PlatesTibial Plateau Levelling OsteotomyThis technique strives to alter the naturally-occurring downward slope (angle) of the tibial plateau. Because of this slope, the femur, which rests upon the tibial plateau, has a tendency to push the tibia forward; normally the CCL acts to restrain this thrust but cannot adequately stabilize the stifle joint when injured or torn. This bio-mechanical fixation procedure is designed to eliminate tibial thrust using standard screws and PlatesAll size screws from 2.0mm to 6.5mm are covered within the range. Various lengths and pre-contouring enhance a popular choice for TPLO surgery.Stainless Steel ISO 5832-1

Order Code No. of Holes Length mm RRPTPC-35-35-55L 3+3 55 £42.00TPC-35-35-55R 3+3 55 £42.00TPC-35-35-57L 3+3 57 £42.00TPC-35-35-57R 3+3 57 £42.00TPC-35-35-80L 4+3 80 £46.00TPC-35-35-80R 4+3 80 £46.00

TPLO Pre Contoured Compression Plates

142

UK manufactured

TPLO

(Slo

cum

sty

le)

TPLO

Com

pres

sion

Pla

tes

SLO-20-L

SLO-24-L

SLO-27-L

SLO-35-L

SLO-35-R

SLO-27-R

SLO-24-R

SLO-20-R

TPL-45/65-90-30 or TPL-45/65-90-45

TPL-35-35-80TPC-35-35-80LTPC-35-35-80R

TPL-35-35-78

TPL-35-35-62

TPL-35-35-57TPC-35-35-57LTPC-35-35-57R

TPL-35-35-55TPC-35-35-55LTPC-35-35-55R

TPL-27-35-45

TPL-27-27-39

TPL-24-24-34

TPL-20-20-26

TPL-15-15-31

TPL-24-24-41G

TPL-24-24-41

200

190

180

170

160

150

140

130

120

110 100

90

80

70

60

50

40

30

20

10

0

143

www.n2-uk.com

Titanium PlatesThere has been a strong demand for Titanium Plates and we are introducing a select range of common product ranges anodised in Blue for easy reference. nb Please ensure only Titanium Screws are used with these Plates.We only use Implantable grade Titanium which conforms to ISO 5832-3 ASTM F139 and implants are completely manufactured in the UK to strict Human Implant Standards.l Titanium is light weight, around 45% of stainless 316LVM making it much lighter on larger plates. l It is extremely biocompatible and has a low rejection rate by the body.l MRI Compatible, (non-ferromagnetic, which means it can be safely examined).l Higher Fatigue Life. l Excellent corrosion resistance.l Titanium anodising also produces anti-galling properties.l Osseointergration.

2.4mm Locking PlatesOrder Code Description No. of Holes Length mm RRPTi-LPL-24-04 2.4 Stacked locking plate 4 31 £69.78Ti-LPL-24-05 2.4 Stacked locking plate 5 38 £74.95Ti-LPL-24-06 2.4 Stacked locking plate 6 45 £80.13Ti-LPL-24-07 2.4 Stacked locking plate 7 52 £85.29Ti-LPL-24-08 2.4 Stacked locking plate 8 59 £90.46Ti-LPL-24-09 2.4 Stacked locking plate 9 66 £95.63Ti-LPL-24-10 2.4 Stacked locking plate 10 73 £100.80Ti-LPL-24-11 2.4 Stacked locking plate 11 80 £105.97Ti-LPL-24-12 2.4 Stacked locking plate 12 87 £111.14Ti-LPL-24-13 2.4 Stacked locking plate 13 94 £114.69Ti-LPL-24-14 2.4 Stacked locking plate 14 101 £119.54Ti-LPL-24-15 2.4 Stacked locking plate 15 108 £124.38Ti-LPL-24-16 2.4 Stacked locking plate 16 115 £129.23Ti-LPL-24-17 2.4 Stacked locking plate 17 122 £135.69Ti-LPL-24-18 2.4 Stacked locking plate 18 129 £142.15

Titanium TPLO Compression PlatesOrder Code Ø Screw No. of Holes Length mm RRPTi-TPL-24-24-34 2.4/2.4mm 3 + 3 34 £38.77Ti-TPL-27-27-39 2.7/2.7mm 3 + 3 39 £38.77Ti-TPL-27-35-39 2.7/3.5mm 3 + 3 39 £43.73Ti-TPL-35-35-55 3.5/3.5mm 3 + 3 55 £56.86Ti-TPL-35-35-57 3.5/3.5mm Broad 3 + 3 57 £59.28Ti-TPL-35-35-62 3.5/3.5mm Long 3 + 3 62 £59.28Ti-TPL-35-35-78 3.5/3.5mm X Long 4 + 3 78 £60.74Ti-TPL-35-35-80 3.5/3.5mm X Long Broad 4 + 3 80 £60.74Ti-TPL-35-45-80 3.5/4.5mm X Long Broad 4 + 3 80 £60.74

144

UK manufactured

For Profile imagesSee page 80 - 2.4 Locking PlatesSee Page 142 - TPLO Compression PlatesSee page 140 - TPLO Delta Plates

Titanium TPLO Delta PlatesOrder Code Ø Screw Length mm RRPTi-DEL-24-L Up to 2.4mm 34 £43.62Ti-DEL-24-R Up to 2.4mm 34 £43.62Ti-DEL-27-L Up to 2.7mm 38 £43.62Ti-DEL-27-R Up to 2.7mm 38 £43.62Ti-DEL-35-L Up to 3.5mm 60 £48.46Ti-DEL-35-R Up to 3.5mm 60 £48.46Ti-DEL-35-RB Up to 3.5mm 76 £56.54Ti-DEL-35-LB Up to 3.5mm 76 £56.54

145

www.n2-uk.com

Pancarpal and pantarsalOrder Code Ø Screw Length mm RRPTI-PAD-20-27 2.0/2.7mm 34 £80.00TI-PAD-20-27L 2.0/2.7mm 34 £150.00TI-PAD-27-35 2.7/3.5mm 38 £81.00TI-PAD-27-35-PB-L 2.7/3.5mm 38 £200.00TI-PAD-27-35L 2.7/3.5mm 60 £81.00TI-PAD-27-35-135L 2.7/3.5mm 60 £90.00TI-PAD-27-35-135R 2.7/3.5mm 76 £90.00

Order Code Ø Screw Length mm RRPTI-PAN-27-35-135S-L 2.7/3.5mm 135° Left £180.00TI-PAN-27-35-135S-R 2.7/3.5mm 135° Right £180.00TI-PAN-27-35-135-L 2.7/3.5mm 135° Left £165.00TI-PAN-27-35-135-R 2.7/3.5mm 135° Right £165.00TI-PAN-20-27-135-L 2.0/2.7mm 135° Left £165.00TI-PAN-20-27-135-R 2.0/2.7mm 135° Right £165.00

** We can make a large selection of titanium plates not listed here. If you have a special request or want a stainless-steel plate manufactured in Titanium please contact us for more information.

146

UK manufactured

Ti-PAN-27-35S-LTi-PAN-27-35S-R

Ti-PAN-27-35-LTi-PAN-27-35-R

Ti-PAN-20-27-R Ti-PAN-20-27-L

Ti-PAD-27-35L

Ti-PAD-27-35

Ti-PAD-20-27

Pancarpal and pantarsal

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

147

Evolox® Locking System

Poly-Axial Locking Systems

148

picture courtesy of Rory Paton BVSc C

ertAVP MR

CVS

UK manufactured

Page

2.4mm Evolox® Cuttable & Cuttable Malleable Plates 152

2.7mm Evolox® Osteosynthesis Plates 152

3.5mm Evolox® Osteosynthesis Plates 154

3.5mm Evolox® Broad Plates 156

3.5mm PCL Evolox® (Poly-axial Compression Locking Plate) 158

2.4mm Evolox® Biological Healing Plates 160

3.5mm Evolox® Biological Healing Plates 160

Evolox® GEN2 Acetabular 160

Evolox® YY Plates 162

Circular Cuttable Locking Plates 162

Evolox® Gen-2 Hybrid T-Plates 163

Supracondylar Osteotomy Plates 164

Pancarpal and Pantarsal Evolox® 164

Evolox® 2.4mm TPLO Version 2 166

Evolox® 3.5mm TPLO Small 167

Evolox® TPLO 168

149

BenefitsReduced soft tissue irritationLow profile plates with smooth rounded edges reduce soft tissue irritation, and aid wound closure.

20°

General Overview of the Evolox® Locking System

Evolox® is an abbreviation of “Evolutionary Locking”Designed to offer the surgeon a flexible solution for a wide range of fixation including, but not limited to Humerous, Femur, Ulna and Tibia.Plates with threaded locking holes manufactured at fixed angles are now widely used in Orthopaedic surgery, with the benefits of these mono-axial locking plates being universally documented and accepted. The Evolox® System progresses this established technology to the next level through its unique and innovative design. The surgeon now has freedom in the angular placement of the fixation screws, whilst still allowing three dimensional plate contouring to take place.The design of the tapered twin start threaded locking hole allows the use of both conventional (ISO 5835) Cortical (Cortex)/Cancellous Bone Screws*, and compatible locking screws. Both screw types or any combination of the two can be positioned with up to 10° of angulation. Unlike other angular locking systems available, there is no metal cutting involved in the locking of the screw head to the plate. This allows for easy removal or replacement.

MaterialMaterial used is 316LVM to ISO 5832-1

*Conventional screws do not lock into the plate, but locate into the spherical recess above the Evolox® feature.

Variable angleScrew holes allow up to 10° of directional angulation.

20° inclusive.

N2 Evolox® is a registered Trademark of N2(UK)LtdEvolox® and Evolox® Gen2 is protected technology by international Law and Patents Pending

150

UK manufactured

Plate bending The need to bend the plates to an accurate anatomical form prior to implantation is greatly reduced as the need to generate compressive forces between plate and bone is not required. The Evolox® technology can be angled toward the fragment and still create a stable fixation. The reduced bending requirement also helps to retain the full strength of the plate, and protect it from stress risers that can cause premature implant failure.

Fragment reductionThe Evolox® technology allows individual fragment fixation by allowing the screws to angle and lock towards the core of the bone rather than be limited to the perpendicular axis of the plate. This gives the plate coverage for multiple fracture configurations.

Pull out resistanceBy opposing screws in varying angular directions using the Evolox® system the perpendicular pull out resistance is greatly increased. Combine this with a locked construct and the reduction of the fracture becomes a reliable fixation in osteoporotic bone. This would not be recommended for other systems with mono-axial direction.

Secure fixationThe Evolox® technology creates a locked construct when used in conjunction with a compatible locking screw, providing angular stability, and a reduced risk of primary and secondary losses of reduction.

Preservation of blood supplyLocking plates do not need to be compressed against the bone to create a stable fixation, thus reducing plate to bone contact, which in turn reduces complications caused by vascular trauma to periosteal tissue.

Crumple zonesPlates in the Evolox® range that require anatomical bending are designed with crumple zones that control the movement of the material during manipulation, and direct distortion away from the locking holes. Locking plugs should be used for added protection.

Satin FinishIn addition to the obvious non-reflective surface providing less light glare during surgery, the uniform surface layer of compressive stress acts to combat stress cracks and corrosion, therefore, increasing the life of implant. Also this type of surface finish has a greater ultrasound reflection. The process itself cleans the part, leaving it free from residues with a low CFU (microorganism) count, resulting in easier autoclave sterilisation.

151

Evolox® is a registered Trademark of N2(UK)LtdEvolox® and Evolox® Gen2 is protected technology by international Law and Patents PendingN2

2.4mm Evolox® Cuttable & Cuttable Malleable Plates

Order CodeNo. of Holes

Length mm RRP

EV-CMP-24-25-150 25 150 £100.00EV-CUT-24-25-150 25 150 £100.00

Will accept 2.4mm Cortical, 2.2mm Cancellous, 2.4mm Locking (Hex or/and Star Torx Drive)

2.4m

m C

ortic

al

2.2m

m C

ance

llous

2.4m

m L

ocki

ng

2.7mm Evolox® Osteosynthesis Plates


Length mm RRP

EV-OS-27-04 4 34 £50.00EV-OS-27-05 5 40 £60.00EV-OS-27-06 6 48 £70.00EV-OS-27-07 7 56 £80.00EV-OS-27-08 8 64 £90.00EV-OS-27-09 9 72 £100.00EV-OS-27-10 10 80 £110.00EV-OS-27-11 11 88 £120.00EV-OS-27-12 12 96 £130.00EV-OS-27-13 13 104 £140.00EV-OS-27-14 14 112 £150.00EV-OS-27-15 15 120 £160.00EV-OS-27-16 16 128 £170.00

Will accept2.7mm Cortical, 3mm Cancellous, 2.4mm/2.7mm Locking (Hex or/and Star Torx Drive)

3mm

Can

cello

us

2.7m

m C

ortic

al

2.7m

m L

ocki

ng

152

UK manufactured 2.4mm Evolox® Cuttable Malleable Plate

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0


EV-O

S-27

-04

EV-O

S-27

-05

EV-O

S-27

-06

EV-O

S-27

-07

EV-O

S-27

-11

EV-O

S-27

-09

EV-O

S-27

-10

EV-O

S-27

-08

EV-O

S-27

-12

EV-O

S-27

-13

EV-O

S-27

-14

EV-O

S-27

-15

EV-O

S-27

-16

EV-CMP-24-25-150

EV-CUT-24-25-150

2.4mm Evolox® Cuttable Plate

153

154154



Length mm RRP

EV-OS-35-04 4 45 £50.00EV-OS-35-05 5 57 £60.00EV-OS-35-06 6 69 £70.00EV-OS-35-07 7 81 £80.00EV-OS-35-08 8 93 £90.00EV-OS-35-09 9 105 £100.00EV-OS-35-10 10 117 £110.00EV-OS-35-11 11 129 £120.00EV-OS-35-12 12 141 £130.00EV-OS-35-13 13 153 £140.00EV-OS-35-14 14 165 £150.00EV-OS-35-15 15 177 £160.00EV-OS-35-16 16 189 £170.00EV-OS-35-17 17 201 £180.00EV-OS-35-18 18 213 £180.00EV-OS-35-19 19 225 £190.00EV-OS-35-20 20 238 £210.00

Will accept3.5mm Cortical, 4mm Cancellous, 3.5mm Locking (Hex or/and Star Torx Drive)

N2

Evolox® Osteosynthesis Plates

3.5M

M C

ORTI

CAL

ST

3.5M

M L

OCKI

NG

4MM

CAN

CELL

OUS

154

Evolox® is a registered Trademark of N2(UK)LtdEvolox® and Evolox® Gen2 is protected technology by international Law and Patents Pending

UK manufactured

155


EV-O

S-35

-16

EV-O

S-35

-15

EV-O

S-35

-14

EV-O

S-35

-13

EV-O

S-35

-10

EV-O

S-35

-11

EV-O

S-35

-04

EV-O

S-35

-12

EV-O

S-35

-09

EV-O

S-35

-08

EV-O

S-35

-07

EV-O

S-35

-06

EV-O

S-35

-05

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

N2

3.5mm Evolox® Broad PlatesA wider version of the Standard Plates by 2mm when a more substantial fixation is desirable. Still with all the benefits of the standard plate but offering further rigidity and starting size is 6 holes.


Length mm RRP

EV-OS-35-04B 4 47 £60.00EV-OS-35-05B 5 59 £70.00EV-OS-35-06B 6 71 £80.00EV-OS-35-07B 7 83 £90.00EV-OS-35-08B 8 95 £100.00EV-OS-35-09B 9 107 £110.00EV-OS-35-10B 10 119 £120.00EV-OS-35-11B 11 131 £130.00EV-OS-35-12B 12 143 £140.00EV-OS-35-13B 13 155 £150.00EV-OS-35-14B 14 167 £160.00EV-OS-35-15B 15 179 £170.00EV-OS-35-16B 16 191 £180.00EV-OS-35-17B 17 203 £190.00EV-OS-35-18B 18 215 £200.00EV-OS-35-19B 19 227 £210.00EV-OS-35-20B 20 239 £220.00


Evolox® Broad Plates

3.5m

m C

ortic

al S

T

3.5m

m L

ocki

ng

4mm

Can

cello

us


156

UK manufactured

3.5mm Evolox® Broad Plates

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

EV-O

S-35

-09B

EV-O

S-35

-10B

EV-O

S-35

-11B

EV-O

S-35

-12B

EV-O

S-35

-15B

EV-O

S-35

-14B

EV-O

S-35

-13B

EV-O

S-35

-16B

EV-O

S-35

-17B

EV-O

S-35

-18B

EV-O

S-35

-19B

EV-O

S-35

-20B

EV-O

S-35

-08B

EV-O

S-35

-07B

EV-O

S-35

-06B

157

N2

3.5mm PCL Evolox® (Poly-axial Compression Locking Plate) A dedicated heavy duty plate for long Bone fractures requiring minimal contouring but maximum strength.Rigid Extruded Profile Constuct.

Some Key points Single locating fixing Compression Poly-Axial Evolox Locking Plate


Length mm RRP

EV-PCL-35-06 6 81 £50.00EV-PCL-35-07 7 93 £60.00EV-PCL-35-08 8 105 £70.00EV-PCL-35-09 9 117 £80.00EV-PCL-35-10 10 129 £90.00EV-PCL-35-11 11 141 £100.00EV-PCL-35-12 12 153 £110.00EV-PCL-35-13 13 165 £120.00EV-PCL-35-14 14 177 £130.00EV-PCL-35-15 15 189 £140.00EV-PCL-35-16 16 201 £150.00


Poly-Axial Compression Plates

3.5m

m C

ortic

al S

T

3.5m

m L

ocki

ng

4mm

Can

cello

us


158

UK manufactured

3.5mm PCL Evolox® (Poly-axial Compression Locking Plate)

PCL-

35-0

7

PCL-

35-0

6

Poly

-Axi

al L

ocki

ng

Poly-

Axia

l Loc

king

Fixed Compression

PCL-

35-0

8

PCL-

35-0

9

PCL-

35-1

2

PCL-

35-1

1

PCL-

35-1

0

PCL-

35-1

3

PCL-

35-1

4

PCL-

35-1

5

PCL-

35-1

6

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

159

N2

3.5mm Evolox® Biological Healing Plates


Length mm RRP

EV-BH-35-08-154 8 154 £40.00EV-BH-35-08-142 8 142 £40.00EV-BH-35-07-130 7 130 £40.00EV-BH-35-07-120 7 120 £40.00


3.5m

m C

ortic

al S

T

3.5m

m L

ocki

ng

4mm

Can

cello

us

2.4mm Evolox® Biological Healing PlatesThe 2.4mm Plates are specifically designed for economical use on Feline Long Bone fractures. They benefit from a rigid extruded construct with the flexibility of having Poly-axial Locking fixation or even 2.4mm Locking screws with 2mm shaft. They are low profile and pre contoured to aid closure.

Order Code Description RRPEV-BHP-24-07-059 2.4mm Biological Healing Plate 7 Holes 59mm Long £45.00EV-BHP-24-08-084 2.4mm Biological Healing Plate 8 Holes 84mm Long £45.00


Evolox® GEN2 Acetabular


Length mm RRP

EV-ACE-24 4 21 £50.00EV-ACE-24B 4 26 £50.00EV-ACE-27 4 33 £60.00EV-ACE-27B 4 36 £60.00EV-ACE-35 6 46 £65.00

2.4 mm Version will accept 2.4mm Cortical, 2.2mm Cancellous, 2.4mm Locking (Hex or/and Star Torx Drive)

2.7mm Version will accept 2.7mm Cortical, 3mm Cancellous, 2.7/2.4mm Locking (Hex or/and Star Torx Drive)

Will accept 3.5mm Cortical, 4mm Cancellous, 3.5mm Locking (Hex or/and Star Torx Drive)

160

UK manufactured


EV-BH-08-154 UNDERSIDE

EV-BH-08-154

EV-BH-08-142

EV-BH-07-130

EV-BH-07-120


EV-BHP-24-07-059 EV-BHP-24-08-084

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

Evolox® GEN2 Acetabular

EV-ACE-24 EV-ACE-24B EV-ACE-27BEV-ACE-27 EV-ACE-35

161

scale 1:1

Evolox® YY PlatesOriginally designed for a chondrodystrophic bi-apical antebrachial deformity that had caused paw rotation in a Basset hound this plate was designed to stabilise both ends of the realigned area. The plate is useful for other procedures in particular the distal radius.

Order Code Description RRPEV-YY-27-12 2.7mm EVOLOX® 12 Hole double ended Y plate £160.00EV-YY-27-13 2.7mm EVOLOX® 13 Hole double ended Y plate £160.00EV-YY-27-14 2.7mm EVOLOX® 14 Hole double ended Y plate £160.00

2mm YY locking plates coming soon see page 79

Circular Cuttable Locking PlatesA unique versatile plate to have available. Whether it is for acetabular work or maxillofacial work this range will be useful. They have been used in jaw fractures as well as around the orbit. This cuttable option offers flexibility to allow all your requirements to be met in one plate.

Order Code Description RRPEV-RP-20-36-24 2.0mm Locking Maxillofacial Ring Plate

24 Hole 36mm Diameter£140.00

EV-RP-24-57-24 2.4mm EVOLOX® Maxillofacial Ring Plate 24 Hole 57mm Diameter

£150.00

EV-RP-27-82-24 2.7mm EVOLOX® Maxillofacial Ring Plate 24 Hole 82mm Diameter

£160.00

scale 1:1

EV-YY-27-12

EV-YY-27-13

EV-YY-27-14


162

UK manufactured Evolox® Gen-2 Hybrid T-PlatesWe have added a range of Hybrid T-Plates with our Evolox® polyaxial locking holes as requested by veterinary surgeons.

CodeHead Locking

screw sizeShaft Locking

screw sizeShaft DCP screw size Length RRP

EV-HTP-27-35-72 2.7 3.5 3.5 72 £75.00EV-HTP-27-35-95 2.7 3.5 3.5 95 £90.00EV-HTP-27-35-105 2.7 3.5 3.5 105 £95.00EV-HTP-27-35-85 2.7 3.5 3.5 85 £70.00EV-HTP-27-35-65 2.7 3.5 3.5 65 £60.00EV-HTP-24-24-71 2.4 2.4 2.4 71 £70.00EV-HTP-24-24-52 2.4 2.4 2.4 52 £60.00

EV-HTP-27-35-72

EV-HTP-27-35-95

EV-HTP-27-35-105

EV-HTP-27-35-85

EV-HTP-27-35-65 EV-HTP-24-24-71

EV-HTP-24-24-52

SHOWN TO SCALE

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

163

Supracondylar Osteotomy PlatesOrder Code Description RRPEV-SCO-35-86-R 3.5mm right hand £108.00EV-SCO-35-86-L 3.5mm left hand £108.00

Pancarpal and Pantarsal Evolox®

We have launched a range of Pancarpal and Pantarsal plates with polyaxial holes included to give surgeons more flexibility in screw placement.

Order Code Description RRPEV-PAN-27-35S-L 2.7/3.5 Standard size left hand £95.00EV-PAN-27-35S-R 2.7/3.5 Standard size right hand £95.00EV-PAN-27-35-L 2.7/3.5 Short version size left hand £95.00EV-PAN-27-35-R 2.7/3.5 Short version size right hand £95.00EV-PAN-20-27-L 2.0/2.7 left hand £95.00EV-PAN-20-27-R 2.0/2.7 right hand £95.00EV-PAN-20-27-120-L 2.0/2.7 120 degree left hand £96.00EV-PAN-20-27-120-R 2.0/2.7 120 degree right hand £96.00

Order Code Description RRPEV-PAD-27-35L 2.7/3.5 Long version £67.00EV-PAD-27-35 2.7/3.5 £67.00EV-PAD-20-27 2.0/2.7 £57.00


164

UK manufactured

EV-SCO-35-86-REV-SCO-35-86-L

EV-PAN-27-35S-LEV-PAN-27-35S-R

EV-PAN-27-35-LEV-PAN-27-35-R

EV-PAN-20-27-R EV-PAN-20-27-L

EV-PAD-27-35L

EV-PAD-27-35

EV-PAD-20-27

Supracondylar Osteotomy Plates

Pancarpal and Pantarsal Evolox®

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

165


EVOLOX® 2.4mm TPLO Version 2This completely re-engineered and reconfigured TPLO Plate incorporates a range of technical features designs for greater osteotomy stability and reduced healing times

New Head Features:• All Evolox® screw holes allowing enhanced freedom of screw

orientation and optimal bone purchase • Evolox® proximal screw hole configuration ensures joint space

avoidance even where contouring of the plate is necessary• New curved profile ensures head-screw holes overlie osteotomised

tibial fragment allowing more central screw placement in the thickest available bone

New Shaft features:• Angled proximal compression hole perpendicular to the osteotomy line

ensures correct compression of the central zone• Offset distal compression hole ensures compression of the proximal

zone of the osteotomy• Single central Evolox® hole reducing implant costsOur Version One Evolox® 2.4mm TPLO Plate is still available and remains a premier choice for the closing wedge technique (using left as right and visa versa)

scale 1:1

166

UK manufactured

scale 1:1EVOLOX® 3.5mm TPLO SmallThe 3.5mm mini plate is designed to fit small stocky dogs such as a Staffordshire Bull Terrier and other breeds weighing between 18-24kg and fills the jump in size between 2.7mm plates and 3.5mm standard plates.

167

Evolox® TPLO TPLO surgery continues to grow and many options are open to the surgeon. Our new plate was two years in the making and has certainly evolved in numerous aspects compared to standard TPLO plates using the same radial cut The use of Evolox® Poly-axial Locking Technology with Cranial and Caudal Screw Placement helps to eliminate operation inaccuracies. The Proximal screw is fixed angled.

Gen 2 Evolox®

The latest advancement in Evolox poly-axial locking technology is unlike any previous medical thread form seen in the market place.

The usual method to achieve poly-axial locking is to either:

1. Create interrupts (breaks) in the thread form, thus allowing the mating thread to pass through the gap to the next thread.

2. Self-cut the screw thread into the plate.

The method in system 1 incurs far less complications with removal of the screw and implant, as system 2 requires the plate to be of a softer material than the screw which then cold fuses the screw to the plate. This is what makes the screw difficult to remove. Also the softer plate is inherently weaker than if using harder material. This method is usually reserved for Titanium products, using pure Titanium on the plate and alloyed Titanium on the screws.

System 1 can have limitations, as the interrupts in thread form reduce the thread strength and can result in thread stripping if subjected to excessive load after placement or excessive torque during placement. Thread stripping although uncommon will weaken the overall construct. To avoid this occurrence where excessive load after placement is anticipated, it is usual to advise an increase in the plate size to the next range, ie 2.7mm to 3.5mm or 3.5mm to 3.5mm broad etc.

This is not always ideal for many reasons, including wound closure and poor bone stock.

For this reason, N2 UK Ltd have strived to overcome this problem and increased the scope of its useability through innovative design and complex machining strategies. We are pleased to say that after several designs and prototypes we have achieved our goal.

Our 2nd generation Evolox® hole system (patent pending) uses a unique twin start tapered triangular thread form that naturally generates the space required to allow the threads to skip to the next level, thus maintaining a continuous thread form and drastically improving the rigidity of the locking interface.

(Please note that it is critical to fill all holes with either a screw or a plug, and follow the torque guidelines)

X-rays courtesy of Christchurch Referrals


168

UK manufactured

Some key points are: Protected Triangular uninterrupted thread form for Poly-axial Locking.

Unique. Durable. Flexible.

Uses standard Twin Start Locking and conventional Cortical(Cortex)/ Cancellous screws.

More precise Compression Angled towards the Oste-otomy.

Limited Contacts Areas for increased Vascular flow.

Lower profile with tapered end and smooth rounded edges.

Deformation Grooves.

Anatomically Shaped.

Available in 6 sizes from 2.4 to 3.5mm Broad. All Handed Left or Right.

Satin Finish with Polished Threads.

Evolox® TPLO

UK manufactured

169

N2

Evolox® TPLOTPLO Evolox® Locking


Length mm RRP

EV-TPLO-24R 3+3 39 £60.00EV-TPLO-24L 3+3 39 £60.00EV-TPLO-24L-V2 3+3 37.5 £60.00EV-TPLO-24R-V2 3+3 37.5 £60.00EV-TPLO-27R 3+3 46 £60.00EV-TPLO-27L 3+3 46 £60.00EV-TPLO-27RL 3+4 54 £60.00EV-TPLO-27LL 3+4 54 £60.00EV-TPLO-35-LS 3+3 50 £65.00EV-TPLO-35-RS 3+3 50 £65.00EV-TPLO-35RL 3+4 74 £65.00EV-TPLO-35LL 3+4 74 £65.00EV-TPLO-35R 3+3 64 £65.00EV-TPLO-35L 3+3 64 £65.00EV-TPLO-35BR 4+5 85 £70.00EV-TPLO-35BL 4+5 85 £70.00

Will accept


170

UK manufactured

TPLO Evolox® Locking

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

EV-TPLO-24L-V2

EV-TPLO-24L

EV-TPLO-27L

EV-TPLO-27LL

EV-TPLO-35L

EV-TPLO-35LL

EV-TPLO-35BL

EV-TPLO-35-LS

171

TPLO Evolox® Delta ‘Style’ PlatesOrder Code Ø Screw mm RRPEV-TPLO-DEL-35L 3.5+Locking £65.00EV-TPLO-DEL-35R 3.5+Locking £65.00

Order Code Ø Screw mm RRPEV-DEL-27-RB 2.7+Locking £63.00EV-DEL-27-LB 2.7+Locking £63.00

EV-DEL-27-RB EV-TPLO-DEL-35R

EV-TPLO-DEL-35L EV-TPLO-DEL-35R

172

TTA

173

www.n2-uk.com

Tibial Tuberosity Advancement - Titanium Alloy (Ti)

TTATTA CageN2 ITEM NO Description Colour RRPTTC-3/10 TTA cage Gold £48.00TTC-3/11 TTA cage Gold £48.00TTC-3/13 TTA cage Gold £48.00TTC-3/16 TTA cage Gold £48.00TTC-3/19 TTA cage Gold £48.00TTC-4.5/10 TTA cage Green £48.00TTC-4.5/13 TTA cage Green £48.00TTC-4.5/16 TTA cage Green £48.00TTC-4.5/19 TTA cage Green £48.00TTC-6/13 TTA cage Blue £48.00TTC-6/16 TTA cage Blue £48.00TTC-6/19 TTA cage Blue £48.00TTC-6/22 TTA cage Blue £48.00TTC-7.5/13 TTA cage Brown £55.00TTC-7.5/16 TTA cage Brown £55.00TTC-7.5/19 TTA cage Brown £55.00TTC-7.5/22 TTA cage Brown £55.00TTC-9/16 TTA cage Blue £55.00TTC-9/19 TTA cage Blue £55.00TTC-9/22 TTA cage Blue £55.00TTC-9/25 TTA cage Blue £55.00TTC-10.5/19 TTA cage Dark purple £55.00TTC-10.5/22 TTA cage Dark purple £55.00TTC-10.5/25 TTA cage Dark purple £55.00TTC-12/22 TTA cage Light purple £60.00TTC-12/25 TTA cage Light purple £60.00TTC-12/28 TTA cage Light purple £60.00TTC-13.5/22 TTA cage Green £60.00TTC-13.5/25 TTA cage Green £60.00TTC-13.5/28 TTA cage Green £60.00TTC-115/22 TTA cage Brown £60.00TTC-15/25 TTA cage Brown £60.00TTC-15/28 TTA cage Brown £60.00TTC-15/31 TTA cage Brown £60.00

TTA Cuttable CageComes with four easy cut bars instead of two thick bars which can be difficult to cut intra-op and require a lot of force to cut through.

N2 ITEM NO Description Colour RRPTTCC-3/19 TTA cuttable cage Gold £50.00TTCC-4.5/16 TTA cuttable cage Green £50.00TTCC-6/22 TTA cuttable cage Blue £53.00TTCC-7.5/23 TTA cuttable cage Brown £53.00TTCC-9/25 TTA cuttable cage Blue £53.00TTCC-10.5/25 TTA cuttable cage Dark purple £53.00TTCC-12/28 TTA cuttable cage Light purple £53.00TTCC-13.5/28 TTA cuttable cage Green £53.00TTCC-15/31 TTA cuttable cage Brown £53.00TTCC-16/34 TTA cuttable cage Green £53.00

174

UK manufactured

175

Tibial Tuberosity AdvancementInstead of altering the slope of the tibial plateau, however, the TTA alters the point of insertion of the patellar tendon. Only part of the bone (the tibial tuberosity) is cut, “advanced”by means of a titanium cage, and secured with a plate and screws. This advancement acts to “tighten-up” the joint, alleviating the instability. A theoretical advantage of this procedure is its less-invasive nature — there is less surgical dissection of the soft tissues and the tibia is not cut within the weight-bearing axis. TTA cages have been proven to work just as effectively with a forkless plate and using standard cortical screws.Manufactured using Implant grade Titanium Alloy.

www.n2-uk.com

TTA SpacersOrder Code Description RRPTTS-2-S 2mm Titanium Spacer 6mm diameter £5.00TTS-4-S 4mm Titanium Spacer 6mm diameter £5.00TTS-6-S 6mm Titanium Spacer 6mm diameter £5.00TTS-2-L 2mm Titanium Spacer 13mm diameter £5.00TTS-4-L 4mm Titanium Spacer 13mm diameter £5.00TTS-6-L 6mm Titanium Spacer 13mm diameter £5.00

TTA ForksOrder Code Description RRPTTF-2P TTA Fork 2 Prong £19.38TTF-3P TTA Fork 3 Prong £21.00TTF-4P TTA Fork 4 Prong £22.62TTF-5P TTA Fork 5 Prong £24.23TTF-6P TTA Fork 6 Prong £25.85TTF-7P TTA Fork 7 Prong £27.46TTF-8P TTA Fork 8 Prong £29.07

TTA PlatesOrder Code Description RRPTTP-2H TTA Plate 2 Hole £16.15TTP-3H TTA Plate 3 Hole £17.77TTP-4H TTA Plate 4 Hole £19.38TTP-5H TTA Plate 5 Hole £21.00TTP-6H TTA Plate 6 Hole £22.62TTP-7H TTA Plate 7 Hole £24.23TTP-8H TTA Plate 8 Hole £25.85

TTA Forkless PlatesOrder Code Description RRPTTP-X2-FL TTA Forkless Plate £16.15TTP-X3-FL TTA Forkless Plate £17.77TTP-X4-FL TTA Forkless Plate £19.38TTP-X5-FL TTA Forkless Plate £21.00TTP-X6-FL TTA Forkless Plate £22.62TTP-X7-FL TTA Forkless Plate £24.23TTP-X8-FL TTA Forkless Plate £25.85

For TTA instrumentation please see our Instrument Catalogue - page 11

Order Code Description RRPWAS-24-TTA 2.4 Titanium TTA Washer

ID 2.7 OD 5.0 W 1.0£4.85

176

UK manufactured

TTF-2P TTF-3P TTF-4P TTF-5P TTF-6P TTF-7P TTF-8P

TTP-8H

TTP-7H

TTP-6H

TTP-5H

TTP-4H

TTP-3H TTP-2H

TTP-X8-FL TTP-X7-FL TTP-X6-FL TTP-X5-FL TTP-X4-FL TTP-X3-FL

TTA Forks

TTA Plates

TTA Forkless Plates

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

TTP-X2-FL

177

Standard Operating Procedures for Evolox® Osteosynthesis Fixation of FracturesKindly Prepared by: Aiz Baig BVSc, MBA, MRCVS

Humerus - Elbow ‘Y’ or ‘T’ Combined medial and lateral approaches. Anatomic reconstruction with lag screws, K wires etc. Fracture reduction of the articular surface should be confirmed by direct visualization.

If only locking screws are used, contouring of the plate is generally not required. The use of Locking Drill Guides is recommended to ensure correct screw trajectory. The Locking Drill Guides can also be used as handles to help position the plate. Drill through the guide hole to the desired depth using an appropriate sized drill bit. Measure the hole depth via a depth gauge. Remove the Locking Drill Guide and insert the appropriate length Locking Screw using a screwdriver. Do not use power tools to insert the locking screws.

If non-locking screws (cortex or cancellous) are used in the plate, the following precautions are necessary:

Since conventional screws pull bone to the plate, contouring of the plate may be required to enhance bone-plate contact. If non-locking screws are used in combination with locking screws, non-locking screws must be adequately inserted and fully tightened prior to locking screw(s) insertion.

Note: Contouring of the plate will alter the angle of the locking screws. It is recommended to insert locking plugs prior to contouring to avoid distortion of internal threads.

Two Evolox Osteosynthesis Plates, one medial and one lateral. Total of 4 Evolox Osteosynthesis Platescrews in reconstructed condylar fragment (not necessary to have all 4 screws in the same Evolox Osteosynthesis Plate). Total of 4 screws in proximal major fragment (not necessary to have all 4 screws in the same Evolox Osteosynthesis Plate). Two x 2.7mm Evolox Osteosynthesis Plates in patients up to 20 kg. Two x 3.5mm Evolox Osteosynthesis Plates in patients over 35 kg. Fill any empty holes with a locking plug.

Femur – DiaphysisIf only locking screws are used, contouring of the plate is generally not required. The use of Locking Drill Guides is recommended to ensure correct screw trajectory. The Locking Drill Guides can also be used as handles to help position the plate. Drill through the guide hole to the desired depth using an appropriate sized drill bit. Measure the hole depth via a depth gauge. Remove the Locking Drill Guide and insert the appropriate length Locking Screw using a screwdriver. Do not use power tools to insert the locking screws.




4 screws in distal and 4 screws in proximal fragments. Single 2.7mm Evolox Osteosynthesis Plate in patients up to 10 kg (medial aspect). Single 3.5mm Evolox Osteosynthesis Plate in patients up to 35 kg (lateral aspect). Double 3.5mm Evolox Osteosynthesis Plate in patients over 35 kg (lateral aspect). Fill any empty holes with a hole plug.If only locking screws are used in the plate absolute anatomical contouring is not necessary.

Tibia – DiaphysisIf only locking screws are used, contouring of the plate is generally not required. The use of Locking Drill Guides is recommended to ensure correct screw trajectory. The Locking Drill Guides can also be used as handles to help position the plate. Drill through the guide hole to the desired depth using an appropriate sized drill bit. Measure the hole depth via a depth gauge. Remove the Locking Drill Guide and insert the appropriate length Locking Screw using a screwdriver. Do not use power tools to insert the locking screws.


Evolox® is a registered Trademark of N2(UK)LtdEvolox® and Evolox® Gen2 is protected technology by international Law and Patents PendingN2

178

UK manufactured



4 screws in distal and 4 screws in proximal fragments. Single 2.7mm Evolox Osteosynthesis Platein patients up to 10 kg (medial aspect). Single 3.5mm Evolox Osteosynthesis Plate in patients up to 35 kg (medial aspect). Double 3.5mm Evolox Osteosynthesis Plate in patients over 35 kg (medial aspect). Fill any empty holes with a hole plug.If only locking screws are used in the plate absolute anatomical contouring is not necessary.

Ulna - Radius If only locking screws are used, contouring of the plate is generally not required. The use of Locking Drill Guides is recommended to ensure correct screw trajectory. The Locking Drill Guides can also be used as handles to help position the plate. Drill through the guide hole to the desired depth using an appropriate sized drill bit. Measure the hole depth via a depth gauge. Remove the Locking Drill Guide and insert the appropriate length Locking Screw using a screwdriver. Do not use power tools to insert the locking screws.




Evolox Osteosynthesis Plateon radius (4 screws in proximal and 4 screws in distal fragment). Evolox Osteosynthesis Plateon medial or dorsal aspect distally. Evolox Osteosynthesis Plate on cranial aspect proximally. Avoid overlong screws transfixing radius and ulna. 2.7mm Evolox Osteosynthesis Platein patients up to 10 kg. 3.5mm Evolox Osteosynthesis Platein patients over 10 kg. Fill any empty holes with a hole plug.If only locking screws are used in the plate absolute anatomical contouring is not necessary.

Relative ContraindicationsThe veterinarian’s education, training and professional judgement must be relied upon to choose the most appropriate surgical implant and treatment. The following contraindications should be taken into account by the veterinarian:

Any active or suspected latent infection or marked local inflammation in or about the surgical site.

Compromised vascularity that would inhibit sufficient blood supply to the fracture site.

Bone stock compromised by pathology prior to application that cannot provide adequate support and/or fixation of the implants.

Implant sensitivity, documented or suspected.

Obesity. An overweight animal can produce loads on the implant that can lead to failure of the surgical procedure or the implant itself.

Animals having insufficient soft tissue coverage over the operative site.

Implant application that would interfere with normal anatomical structures and range of motion.

Any neuromuscular pathology that would create an unacceptable risk of fixation failure or postoperative complications.

Other medical or surgical conditions which would preclude the potential benefit of surgery.

Maximum recommended torque for tapered screw head engagement:3.5mm Locking screw = 2.30 N-mm (0.02 lbf-in)2.7mm Locking screw = 1.15 N-mm (0.01 lbf-in)Over tightening the screw may result in threads stripping, and loss of secure fixation.In this event replace the over tightened screw with a conventional cortical screw.Secure fixation can be achieved with much lower torque levels using locking screw technology.

179

www.n2-uk.com

Choices and Preferential OptionsWe can produce all of our Trauma Plate range to have any of the three finish options.

Satin FinishStarting to be very popular and desirable for the following reasons: • lack of annoying light reflection during surgery.

• Creates a uniform surface layer of compressive stress, which acts to combat stress cracks and corrosion, therefore, increasing the life of implant.

• Greater ultrasound reflection.

• Cleaner part, free from residues with a low CFU (microorganism) count, resulting in easier autoclave sterilisation.

Titanium • Blue Anodised

• Extreme light weight (around 45% of Stainless 316LVM),

• Biocompatible, (Limited Rejection Rates, non-toxic AND not rejected by the body)

• MRI Compatible, (non-ferromagnetic, which means it can be safely examined)

• Higher Fatigue Life,

• Excellent corrosion resistance.

• Titanium Anodising also produces anti-galling properties.

Osseointegration is a unique phenomenon where your body’s natural bone and tissue actually bond to the artificial implant. This firmly anchors the titanium dental or medical implant into place. Titanium is one of the only metals that allows for this integration.

180

Technical Data and Processes

We guarantee and certify that all of our implant materials are made to the following specifications.

Stainless Steel 316 LVM ISO 5832-1 ASTM F138/F139316LVM (low carbon vacumm melt) stainless steel, this stainless steel is vacuum melted to achieve high levels of purity and cleanliness. It has excellent resistance to both general and intergranular corrosion, and pitting and crevice corrosion. The vacuum melt allows for superior surface finish.

Titanium Alloy ISO 5832-3 ASTM F136One of the most commonly used titanium alloys is an alphabeta alloy containing 6% Al and 4% V. This alloy, usually referred to as Ti 6Al-4V, exhibits an excellent combination of corrosion resistance, strength and toughness. In the case of medical applications, stringent user specifications require controlled microstructures and freedom from melt imperfections. The interstitial elements of iron and oxygen are carefully controlled to improve ductility and fracture toughness. Controlled interstitial element levels are designated ELI (extra low interstitials), hence the designation Ti 6Al-4V ELI.

Profiles Bars Strips Sheets

ElectropolishingAll of our Stainless Steel Screws, Plates and Kirshner/Arthrodesis Wires receive the following ‘Electro Polishing’ treatment.

“Electropolished stainless steel surfaces are bright and highly reflective. This results from the removal of an often contaminated surface layer and the electrochemical action of micro-smoothing. The advantageous features resulting from such a bright and smooth surface are many. The passive oxide layer, which is essential to prevent stainless steel from corroding, cannot be improved upon following electropolishing. By reducing the total surface area, a result of micro-smoothing, products are less likely to adhere to an electropolishing finish. In the same way, surfaces can be cleaned and kept clean more readily. Friction is also reduced and the mechanism of preferentially removing surface high spots, makes electropolishing suitable for eliminating fine burrs”.

We do not hand Polish our implants as this can lead to hole/product deformity, inconsistent surface finish and inclusions being impregnated to the product line. Our implants are routinely checked for Bio-burden results of cleanliness and receive a final Nitric Acid passivation prior to dispatch.

UK manufactured

181

www.n2-uk.com

1. Definitions1.1 ‘Company’ means N2 (UK) Ltd

1.2 ‘Customer’ means the Veterinary practice or any person to whom the Company has agreed to supply goods.

1.3 ‘Goods’ means the products which the Company is to supply to the customer in accordance with these conditions.

1.4 ‘Writing’ includes telex, cable, facsimile transmission, e-mail or similar means of communication.

2. Breakages and Shortages In the case of obvious shortages or suspected damage to

deliveries of goods, the driver’s delivery note must be signed accordingly by the person accepting the delivery on behalf of the customer. All claims for broken or missing goods should be reported to the Company no later than three days from the date of signed delivery. Where independent transport is used failure to sign or indicate on delivery notes any shortage and/or damage will invalidate the Company’s claim against the carrier involved and therefore the customer’s claim against the Company.

3. Returned Goods Policy3.1 Under normal circumstances, goods will not be accepted for

return for credit other than for the following reasons:

a) To correct a Company delivery or order error.

b) Batch Material recall.

c) Where the products or packages are alleged to have been faulty, damaged or tampered with prior to delivery.

d) Where the products have been offered on a pre -arranged ‘sale or return’ basis.

e) Where the Company agrees, in advance of their return, to accept goods not covered by any of the above criteria.

3.2 Goods Returned to Correct a Company Error

a) The goods must be returned within 7 working days of receipt by registered courier. Goods must be adequately packaged to ensure that no damage is caused during their return to the Company.

b) All returned goods must be in perfect original condition; not marked in any way; should not show any evidence of being tampered with and still sealed in original packaging.

c) To be considered for return for credit, the goods must be accompanied by a copy of the original invoice or delivery note, or the number of the specific invoice on which the goods were supplied, together with a reason for their return. If this information is missing, there will be a delay in issuing a credit.

3.3 Returns where the products or packages are alleged to have been faulty, damaged or tampered with prior to delivery:

a) Details of the fault or damage should be notified to the Company in writing as soon as possible in order that N2 (UK) Ltd can be alerted.

b) Goods must be packed separately and accompanied by a copy of the invoice or delivery note (as in 3.2(c))

3.4 Where the Company agrees to accept the return of goods not covered by any of the criteria recited in clauses 3.2 -

3.4 Goods will only be accepted by prior agreement with the Company and must be accompanied all the information detailed in 3.2(c) in addition to the name of the person who has authorised the return with written confirmation.

Please note: Goods returned under this category may be subject to a handling charge.

3.5 Goods returned to stock

Goods returned by customers for any of the above reasons will only be considered for credit if;

a) It is known that they have been stored in accordance with the manufacturer’s recommendations.

b) They have been assessed and accepted by a person authorised by the Company so to do. The assessment will take into account the nature of the product, any special storage conditions required and the time elapsed since the goods were supplied.

3.6 Special Orders

These products will not be accepted for return or credit unless supplied as a result of a Company error. In such cases, the product must be returned within 7 working days of receipt.

3.7 Packaging

All returned goods must be securely packaged to prevent damage during the return journey.

4. Price of Goods Goods will be invoiced at the prevailing price at the date

of dispatch to the customer. The price of goods shall be subject to alteration by the Company without prior notice to the customer. The price is exclusive of any Value Added Tax for which the customer shall be additionally liable to pay the Company.

The Company or an other approved supplier shall not be liable for any taxes, commission or payments due to local, national or International Governing bodies in respect of delivered products.The customer is also solely responsible for additional fees, dispersements or import duty levied by the customer’s country of origin.

5. Terms of Payment5.1 The customer shall pay the amount of the invoice on strictly

30 days terms unless otherwise agreed in writing by the Company. The purchaser will not be considered to have paid any amount tendered by cheque unless and until it has been credited to the Company’s bank Account.

If the customer fails to pay on the due date, the Company reserves the right to:

a) Suspend any further deliveries to the customer

b) Appropriate any payment raised by the customer to such of any other invoices raised by the Company for goods supplied to the customer as the Company may think fit, notwithstanding any purported appropriation by the customer and:

N2 (UK) LtdTerms & Conditlons Of Trade

182

c) Charge the customer interest (both before and after any judgment) on amounts unpaid at the rate of 2.5% per month until payment is made in full. Notice of interest charges will be served in writing on the customer.

6. Delivery Any dates/times quoted for delivery of the goods are to be

treated as estimates only and the Company shall not be liable for any loss, injury, damage or expense arising from delay in delivery of the goods howsoever caused.

7. Force Majeure The Company shall not be liable to the customer or be

deemed to be in breach of the Contract by reason of any delay in performing, or any failure to perform, any of the Company’s obligations in relation to the Goods, if the delay or failure was due to any cause beyond the Company’s reasonable control.

Without prejudice to the generality of the foregoing, the following shall be regarded as causes beyond the Company’s reasonable control:

a) Act of God, explosion, flood, tempest, fire or accident;

b) Strikes, lock-outs or other industrial actions or trade disputes (whether involving employees of the Company or third parties);

c) War or threat of war, sabotage, insurrection, civil disturbance or requisition;

d) Import or export regulations or embargos;

e) Difficulties in obtaining raw materials, labour, fuel, parts or machinery;

f) Power failure or breakdown in machinery.

8. Liabilitya) Implants must only be used once. Even after a short -term

implantation externally non-visible damages may be present. If the implant has to be bent for anatomical forming, this must be uniform and utmost care with correct instruments taking care of critical points, such as decreasing the cross section due to bores. Multiple alternating contouring (forward and reverse bending) should never be carried out to avoid metal fatigue.

Bending stresses damage the implant irreparably.

b) All implants are manufactured from high quality materials in accordance with ISO standards and therefore should not be combined with any other products from alternative manufacturers.

c) The use of handling and storing of all goods should only be carried out by fully qualified personnel to a European Recognized standard.

d) Goods are sold on the understanding that the customer is solely responsible for determining the suitability of the goods for the purposes for which the customer intends to use them.

Accordingly the Company’s liability for any loss or damage suffered by the customer and arising by defects in the goods, shall be limited to the invoice price of the goods in respect of or in relation to which loss or damages is claimed. The

Company will not accept under any circumstances liability for consequential loss, inconsequential losses, damage or loss of profits arising from the use of the goods, service, information and advice.

9. Title and Risk Unless otherwise agreed in writing between the parties prior

to delivery, the title to the goods shall not be transferred to the customer until the full purchase price has been paid to the Company. The risk of loss or damage to the goods shall pass to the customer on the date that the goods are received and accepted by the customer

10. Insolvency10.1 This clause applies if:

a) The customer makes any voluntary arrangement with its creditors or becomes subject to an administration order or (being an individual or firm) becomes bankrupt or (being a company) goes into liquidation (otherwise than for the purpose of a solvent amalgamation or reconstruction);

b) An encumbrance takes possession, or a receiver is appointed, over any of the property or assets of the customer;

c) The customer ceases, or threatens to cease, to carry on business;

d) The Company reasonably apprehends that any of the events mentioned above is about to occur in relation to the customer and notifies the customer accordingly.

10.2 If this clause applies then, without prejudice to any other right or remedy available to the Company, the Company shall be entitled to cancel the Contract or suspend any further deliveries under the Contract without liability to the customer. If the Goods have been delivered but not paid for, the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.

11. Indemnity The customer agrees to indemnify the Company against all

loss, damage, costs, legal costs and professional and other expenses of any nature whatsoever incurred or suffered by the Company or by a third party as a result of the use of the Goods, the breach of any legislation relating to the use of the Goods or as a result of any breach of the Contract by the customer.

12. Jurisdiction These conditions shall be construed in accordance with and

governed by English Law. Each of the parties irrevocably submits for all purposes in connection with the Conditions to the exclusive jurisdiction of the Courts of England.

183

www.n2-uk.com184

Index Page1.5mm Mini Compression Plate 922.0/2.4mm Hybrid Locking Screws (Self Tapping Star Torx Drive) T8 682.0/2.7/3.5/4.5mm Buttress Bridge Plate (Biological Healing Plate) 1062.0mm Broad Mini Compression Plate 942.0mm Distal Plates 1162.0mm Fine Threaded Fragment Pins 622.0mm Limited Contact Plate 1262.0mm Locking Drill Guide 862.0mm Locking Plate 792.0mm Locking Plug 862.0mm Locking Screw (Self Tapping Star Torx Drive) T6 672.0mm Mini Plate Straight Tubular 1102.0mm Mini Self Compression Plate 922.0mm Round Hole Plate 1362.0mm YY plates 792.4 Locking Plate 802.4mm Evolox® Biological Healing Plates 1602.4mm Evolox® Cuttable & Cuttable Malleable Plates 1522.4mm Limited Contact Plate 1262.4mm Locking Drill Guide 862.4mm Locking Plates 1442.4mm Locking Screw (Self Tapping Hex Drive) 692.4mm Locking Screw (Self Tapping Star Torx Drive) T8 702.4mm Mini Self Compression Plate 942.4mm Titanium Cortical Bone Screw Self Tapping 1.5mm Hex Drive 212.4mm Titanium Cortical Bone Screw Self Tapping 2.0mm Hex Drive 212.7 Locking Plate 822.7/3.5mm Hybrid Locking Screws (Self Tapping Hex Drive) 732.7mm Distal Plates 1162.7mm Evolox® Osteosynthesis Plates 1522.7mm Heavy Duty Round Hole Plate 1382.7mm Limited Contact Plate 1282.7mm Locking Drill Guide 862.7mm Locking Plug 862.7mm Locking Screw (Self Tapping Hex Drive) 712.7mm Locking Screw (Self Tapping Star Torx Drive) T8 722.7mm Mini Self Compression Plate Thick 962.7mm Mini Self Compression Plate Thin 962.7mm Quarter Tubular 1102.7mm Reconstruction Plates 1122.7mm Round Hole Plate 1362mm Locking T-Plates 79

185

Index Page3.5 T-Plates Round Hole 1163.5mm Broad Buttress Bridge Plate (Biological Healing Plate) 1083.5mm Broad Limited Contact Plate 1323.5mm Evolox® Broad Plates 1563.5mm Evolox® Osteosynthesis Plates 1543.5mm Evolox® Biological Healing Plates 1603.5mm Heavy Duty Round Hole Plate 1383.5mm Limited Contact Plate 1303.5mm Locking Drill Guide 863.5mm Locking Plate 843.5mm Locking Plug 863.5mm Locking Screw (Self Tapping Hex Drive) 743.5mm Locking Screw (Self Tapping Star Torx Drive) T15 753.5mm One Third Tubular 1103.5mm PCL Evolox® (Poly-axial Compression Locking Plate) 1583.5mm Reconstruction Plates 1123.5mm Round Hole Plate 1363.5mm Self Compression Plate Straight Broad 1003.5mm Self Compression Plate Straight Narrow 984.5mm IOHC (Incomplete ossification of the humeral condyle) 454.5mm Self Compression Plate Straight Broad 1044.5mm Self Compression Plate Straight Narrow 102Acetabular Plates 116Broad Cuttable Plates 114Cancellous Bone Screw 2.2mm Full Thread Self Tapping (spiral point) 38Cancellous Bone Screw 3.0mm Full Thread Self Tapping (spiral point) 39Cancellous Bone Screw 3.5mm Full Thread (round end) 40Cancellous Bone Screw 4.0mm Full Thread Self Tapping (spiral point) 41Cancellous Bone Screw 4.0mm Part Thread Self Tapping (spiral point) 42Canine Cranial Pantarsal Arthrodesis Plate 122Circular Cuttable Locking Plate 79Circular Cuttable Locking Plates 162Cortical Bone Screw 1.5mm 14Cortical Bone Screw 1.5mm Self Tapping 15Cortical Bone Screw 2.0mm 16Cortical Bone Screw 2.0mm Self Tapping 17Cortical Bone Screw 2.0mm Self Tapping (Cruciform) 18Cortical Bone Screw 2.0mm T6 Star Torx Drive 17Cortical Bone Screw 2.4mm Self Tapping (Cruciform) 22Cortical Bone Screw 2.4mm Self Tapping (Star Torx Drive) T8 23Cortical Bone Screw 2.4mm Self Tapping 1.5mm Hex Drive 19Cortical Bone Screw 2.4mm Self Tapping 2.0mm Hex Drive 19

www.n2-uk.com186

Index PageCortical Bone Screw 2.7mm 24Cortical Bone Screw 2.7mm Self Tapping 25Cortical Bone Screw 2.7mm Self Tapping (Star Torx Drive) T8 27Cortical Bone Screw 3.5mm 28Cortical Bone Screw 3.5mm Self Tapping 29Cortical Bone Screw 3.5mm Self Tapping (Star Torx Drive) T15 30Cortical Bone Screw 4.5mm 32Cortical Bone Screw 4.5mm Self Tapping 33Cortical Bone Screw 5.5mm 36Cortical Bone Screw 5.5mm Self Tapping 37Cortical Shaft Screw 4.5mm (Lag Screw) 35Cuttable Plates 114Drill Bit - Anti Skid 51Drill Bit - Cannulated 51Drill Stops 51Evodurance® Drill Bits with AO Style Quick Release 49Evodurance® Drill Bits with Straight Shank 49EVOLOX® 3.5mm TPLO Small 167EVOLOX® 2.4mm TPLO Version 2 166Evolox® GEN2 Acetabular 160Evolox® Gen-2 Hybrid T-Plates 163Evolox® TPLO 168Evolox® YY Plates 162Feline Pantarsal Plate Cranial Position 122Fully Threaded Kirschner Wires Trocar / Trocar 62Handles 52Headless Compression Lag Screws 44H-Plates 116Hybrid T-Plates 118IOHC Cortical Shaft Screw 4.5mm 45Kirschner Wire (Bayonet / Round) 61Kirschner Wire (Trocar both ends) 61Kirschner Wires (K-wires), Steinmann Pins, Denham pins and guide wires 59Locking Pancarpal Arthrodesis 124Malleable Plates 114Mini Screwdriver 53Negative Threaded Ellis Pins Short Fine End Thread 63Negative Threaded Pins Cortical End Thread 62Pancarpal and pantarsal 146Pancarpal and Pantarsal Evolox® 164Pancarpal Arthrodesis Plates DCP Style 124Pancarpal Arthrodesis Plates Round Holes 124

187

Index PagePantarsal Arthrodesis Plates 120Partial Carpal Arthrodesis Plate 124Positive Threaded Pins Cancellous End Thread 64Positive Threaded Pins Cancellous Mid Thread 64Positive Threaded Pins Cortical End Thread 63Positive Threaded Pins Cortical Mid Thread 64Premium Screwdrivers 52Screw Driver Tip - AO Quick Release 54Screwdriver 53Sherman Screw 2.0mm HC Thread 43Sherman Screw 2.7mm (2.9mm actual) HC Thread 43Sherman Screw 3.5mm HC Thread 44Steinman Intra-Medullary Pin Threaded Trocar / Plain Trocar Tips 60Steinman Intra-Medullary Pin Trocar Tips 60Supracondylar and Osteotomy (Distal Femur) Plates 134Supracondylar Osteotomy Plates 134Supracondylar Osteotomy Plates 164Suture Anchor Screws (Self Tapping) 46Suture Pins (Snap-Off) 46Taps AO Quick Release 54Taps Square ended to fit a standard adjustable tap wrench 54Titanium Cortical Bone Screw 2.4mm Cruciform Drive 20Titanium Cortical Bone Screw 2.7mm Self Tapping 26Titanium Cortical Bone Screw 3.5mm Self Tapping 31Titanium Cortical Bone Screw 4.5mm Self Tapping 34Titanium Plates 144Titanium TPLO Compression Plates 144Titanium TPLO Delta Plates 145Torx Screw holding sleeves 52TPLO (Slocum style) 142TPLO Compression Plates 142TPLO Delta ‘Style’ Plates 140TPLO Evolox® Delta ‘Style’ Plates 172TPLO Evolox® Locking 170TPLO Pre Contoured Compression Plates 142TPO EQ 140TTA Cage 174TTA Cuttable Cage 174TTA Forkless Plates 176TTA Forks 176TTA Plates 176TTA Spacers 176

N2Vet-V2

Please contact us for a copy of our Veterinary Instrument Catalogue

www.n2-uk.com

+44 (0)23 9323 3265 @n2ukcom


VETERINARY

InstrumentCatalogue

www.n2-uk.com

+44 (0)23 9323 3265 @n2ukcom


veterinary osteosynthesis - n2n2-uk.com/wp-content/uploads/2018/11/n2-implant... · cancellous bone...

Documents