vibe car audio 2012 product brochure

systemsI N T E G R A T E D

B R I T I S H A U D I O

2 0 1 1 L I N E U P

SPEAKERRANGE

SUBWOOFERRANGE

1.6”(41mm)3.7(93mm)

1.8”(46mm)4.5(114mm)

1.7”(44mm)5.6(143mm)

s10 s12 s15

4 6 57 692 693

1500 WATTSUP TO

CUSTOM-FIT COMPONENT

Slick 5 Comp Slick 6 Comp

Slick A0 Slick A1

Slick A0 Slick A1

80 watts

240 watts

40 watts RMS

B

5

+

Y30

480 WATTSUP TO

65

270 WATTSUP TO+

Component

AMPLIFIERRANGE

ENCLOSURERANGE

Slick Stereo 2

Slick Stereo 4

Slick Bass 1

2 Channel2.3” (58mm)7.9” (201mm)6.4” (163mm)2 x 75 watts2 x 100 watts1 x 200 watts

4 x 75 watts4 x 100 watts

N/AN/A

2 x 200 watts 1 x 400 wattsN/A N/A 1 x 600 watts

400 watts 800 watts 1200 watts20Hz - 20kHz 20Hz - 20kHz 10Hz - 500Hz0.1% 0.1% 0.1%HPF/LPF/FLAT HPF/LPF/FLAT LPF/Subsonic

50Hz - 750Hz 50Hz - 750Hz 40Hz - 220Hz

2.3” (58mm)10.3” (261mm)6.4” (163mm)

2.3” (58mm)8.8” (218mm)6.4” (163mm)

4 Channel Mono Bass Amp

Slick Channel 5

4 x 90 wattsN/A

1 x 300 watts 1 x 515 watts

1750 watts20Hz - 20kHz0.1%HPF/LPF/Subsonic

50Hz - 200Hz

2.3” (58mm)16.5” (420mm)

6.4” (163mm)

5 channel

10 12 15

Endcaps Input

2ch 4ch

1300 WATTSUP TO

1500 WATTSUP TO

for best results use

see accessories

stereo 2 stereo 4 bass1

ACTIVE

Labyrinth Slot PortN/A N/A

TWIN ACTIVE14.2” (360mm)15.7” (400mm)15.7” (400mm)

Slick 124Ohms

400 watts

1200 watts

deep smooth bass deep smooth bass

PowerBox™ Bass 1 Included

PowerBox™ Bass 1 Included

Slick Stereo 2Slick Stereo 4Slick Bass 1



Labyrinth Slot Port

14.2” (360mm)31.4” (800mm)

15.7” (400mm)2 x Slick 124Ohms800 watts

2400 watts

12

ACTIVE ENCLOSURE

ACTIVE ENCLOSURE

TWIN12

SPEAKERRANGE

AMPLIFIERRANGE

LiteAir 4

4

70 watts210 watts

35 watts RMS

Space Stereo 2Space Stereo 4



89 dB80Hz - 25kHz 60Hz - 25kHz 55Hz - 25kHz

1.3” (34mm)3.7” (93mm)

101mm

CMaterial

Weight

Rating

V

V

B

B

B

watts1 x 14,500 watts

1

10Hz - 500Hz

LiteBox Bass 1

1.8” (47mm) 8.2” (210mm) 7.1” (180mm) 1 x 400 watts 1 x 650 watts 1300 watts

35Hz - 500Hz

120dB

S

B

5 6

300 WATTSUP TO

4

NEO

Component

Alloy

Gasket

1300 WATTSUP TO

Bass 1


see accessories

4

shallow ENCLoSURERANGE

ENCLOSURERANGE

1350 WATTSUP TO

Port plug


see accessories

12

900 WATTSUP TO

LiteAir Auto 8A

LiteAir 8

300 watts900 watts

Tight Bass

PowerBox Bass 1

3.15“ (80mm) excl grill11.2“ (285mm)15.6“ (395mm)

Labyrinth Slot Port

LiteAir Auto 8

LiteAir 8

300 watts900 watts

Tight Bass

N/A

3.15“ (80mm) excl grill11.2“ (285mm)15.6“ (397mm)

Labyrinth Slot Port

LiteAir Compact 12

LiteAir 12

450 watts1350w

Tight Bass

PowerBox Bass 1

14.1“ (359mm)15.5“ (393mm)12.4“ (200mm)

8 Active 8 Passive

ACTIVE ENCLOSURE

ACTIVE ENCLOSURE

SPEAKERRANGE

SUBWOOFERRANGE

AMPLIFIERRANGE

88dB

2 Ohm DVC

50ozY35

50ozY35

10mm 10mm

2 Ohm DVC

1

10 12

BlackAir 1Tweeter1 -way38mm60w180w30w

90dB3.5KHz4 Ohm24mm50mm0.5” 12mmNeodymium0.3ozN35


N/AN/A

2 x 300 watts 1 x 450 wattsN/AN/A N/A

1 x 750 watts

1200 watts 1500 watts20Hz - 20kHz 10Hz - 500Hz0.1% 0.1%HPF/LPF/FLAT LPF/Subsonic

50Hz - 750Hz 40Hz - 220Hz

2.1” (54mm)12.2” (309mm)6.5” (165mm)

2.1” (54mm)10.3” (262mm)6.5” (165mm)


5 6

69

Stereo 4

Bass 1

1600 WATTSUP TO

Multi-Roll

Conesupport

FEA

FEMM

525 WATTSUP TO

Tri-axial

TweeterAttenuation

0dB -3dB

Y30

Component

Alloy

Gasket

Input

2ch 4ch

Endcaps2500 WATTS

UP TO


see accessories

ENCLOSURERANGE

BlackAir Vented 12

BlackAir Vented 12 BLK

PowerBox Bass 1

14.7“ (375mm) 22.0“ (560mm) 15.6“ (397mm)

B

watts

watts

PowerBox Bass 1

14.7“ (375mm)22.0“ (560mm)15.6“ (397mm)

wattswatts

w

3200 WATTSUP TO

Port plug

BlackAir Bandpass 12

PowerBox Bass 1

14.7“ (375mm)22.0“ (560mm)16.8“ (427mm)

600 watts1800 watts

3200 WATTSUP TO

Port plug

TWIN

bandpass vented

Hybrid

1212 Black12


see accessories

BlackAir Hybrid 12T

PowerBox Bass 2

14.7“ (375mm)37.8“ (960mm)15.6“ (397mm)

x 2

1150 watts3400 watts

SPEAKERRANGE

SUBWOOFERRANGE

120oz Y30

Space Bass 1

B

8.4“ (213mm)

Space 15 D2/D4

B

Space Bass 1

120oz Y30

1200 watts w

watts watts 3600 watts

600 watts RMS

20Hz - 500Hz

13.9“ (352mm) 7.4“ (189mm)

11.1“ (283mm)

Space 12 D2/D4

S

15

3D 5 6 12

390 WATTSUP TO

MECHANICAL

THERMALUNITY

3-wayComponent

TweeterAttenuation

0dB -6dB

12dB

Alloy

Gasket SUPER

Conesupport

FEA

FEMMMulti-RollPro

Terminal3600 WATTS

UP TO

AMPLIFIERRANGE

ENCLOSURERANGE

Space Vented 12

Space Vented 15

Space Vented 12 twin

Space Bass 1 Space Bass 1 2 x Space Bass 1 Strapped

6000 WATTSUP TO

Port plug

SPACE

12 12 twin15


N/AN/A

1 x 300 watts 1 x 450 watts

N/A 1 x 1200 watts

N/A 1 x 750 watts

600 watts 2400 watts20Hz - 20kHz 10Hz - 500Hz0.1% 0.1%HPF/LPF/FLAT LPF/Subsonic

50Hz - 750Hz 40Hz - 220Hz

2.1” (54mm)9.8” (249mm)6.5” (165mm)

2.1” (54mm)13.3” (339mm)6.5” (165mm)


1300 WATTSUP TO

Bass 1Stereo 2


see accessories

SPEAKERRANGE

loudspeakerRANGE

ABSORBING

CONETri-axial

600 WATTSUP TO

900 WATTSUP TO

FEMMFEA

CLOTHD R I V E R

C O M P E T I T I O N

bullet tweeter coaxial

PRO - 4T PRO - 8M PRO - 10W PRO - 12

1-way 1-way 1-way 2-way

4” (100mm) 8” (203mm) 10” (254mm) 12” (304mm)

100 watts 200 watts 250 watts 300 watts300 watts 600 watts 750 watts 900 watts50 watts 100 watts 125 watts 150 watts107dB 93dB 94dB 93dB1.5kHz - 20kHz 65Hz - 7.5kHz 55Hz - 3.5kHz 45Hz - 20kHz

4Ω 4Ω 4Ω 4Ω

1.7” (65mm) 3.4” (85mm) 4.2” (106mm) 6.8” (173mm)3.4” (93mm) 7.3” (185mm) 9.25” (235mm) 11.2” (285mm)1” (25mm) 1.7” (44mm) 2” (50mm) 2.4” (60mm)

ferrite ferrite ferrite ferrite

20oz 40oz 44oz 50ozY25 Y25 Y25 Y25

BlackDeath Stereo 4 BlackDeath Stereo 4 BlackDeath Stereo 4 BlackDeath Stereo 4

component midrange component woofer

48

1012

AMPLIFIERRANGE

SubwooferRANGE

9Hz - 35kHz 10Hz - 500Hz 97dB

V

B

B

BlackDeathREAPER

BlackDeath Bass 1

BlackDeath Stereo 4

Mono Bass amp

-

4.4” (112mm) 39.4” (1000mm) 14.3” (363 mm)

-RMS @ 1 ohm stereo -


29000 watts1 x 14,500 watts

10Hz - 500Hz 113dB

BUBONICStereo 4 Bass 1

CHIP

Input

2ch 4ch

10,000 WATTSUP TO


see accessories

6500 watts

20,000 watts RMS3250 watts RMS90 dB

20Hz - 850Hz

QUAD 0.75 Ohm

13.9“ (352mm)11.8“ (299mm)

Unlimited

30mm

570ozY25

BlackDeath Bass Reaper

BlackDeath“Bubonic” 15

4” Edge wound

Competition SPL Subwoofer

20,000 WATTSUP TO

Reaper

BlackDeath 12

Dual 1 Ohm

9

B

B

watts1 x 14,500 watts

1

BlackDeath Bass 1

BlackDeathVented 1516.5” (420mm)

35.2” (895mm) 17.9” (455mm)

2500 watts 7500 watts 1250 watts RMS

B

SUPER

Cone support

FEA

FEMM

52) Parametric Bass Enhance variable frequency and bass boost

12dB

53) bass Enhance Boosts EQ to overcome road noise

54) Separate CrossoverSeparate crossover network that is superior to in-line filters

55) Separate 12dB CrossoverSuperior crossover network via steeper crossover slope

56) Active Crossover Superior sound via steep crossover

57) Super Slim Shallow mounting depth

58) Supercar Series Lightweight and compact, maximum performance minimum weight

59) Tweeter Attenuation Provides level adjustment for the tweeter output

60) 2 or 4 Channel Input All four channels can be driven from a two channel input

61) Mechanical Thermal Unity Increased heat dissipation

62) 3D Midrange and tweeter combine to produce 360o

sound

63) Competition SPL High performance SPL subwoofer

64) Reconeable The moving parts of the subwoofer can be replaced

Port plug 93) Active EnclosureSubwoofer enclosure with integrated amplifier

94) Acoustic Suspension Sealed enclosure offers high power handling

95) Bass Reflex Ported subwoofer enclosure delivers boosted bass response

96) Bandpass Benefits of a ported and sealed enclosure

97) Slot Port Rectangular port offers higher efficiency and increased SPL

98) Turboport Dual flared port for smoother airflow and cleaner bass

99) Port Plug Allows easy conversion from bass reflex to acoustic suspension

100) Variable Tuning Dual ported enclosure allows for three different tuning options

101) A.R.B.S.S. Anti Resonance Bass Support System

102) Box Grip Specially designed carry handle built into AR.B.S.S.

103) Dual Driver Subwoofer enclosure featuring twin subwoofers

104) Flat 13 High quality 13 AWG 100% OFC copper speaker cable

27) FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight

28) Cone Support Specially designed cone support adds rigidity without excessive weight

29) Single Spider Provides control and stability of the woofer cone

30) Dual Spider Control and stability of the cone with high power handling

31) Dual Voice Coil Dual voice coil offers multiple impedance options

32) FEMM Motor Provides low distortion and linear flux saturation

33) Alloy Torsion Basket Provides rigidity and support for motor and moving parts

34) Alloy Basket Machined, cast aluminium basket for high rigidity and support

35) Y30 Magnet Single Y30 rated magnet. Higher magnet ratings mean more power

36) Y35 Magnet Single Y35 rated magnet. Higher magnet ratings mean more power

37) Neodymium Magnet Provides high magnetic strength from a smaller, lighter magnet

38) Single Magnet Single ferrite magnet for high power handling

1) Rubber Gasket Ensures a perfect seal when mounting the speaker

2) Steel Mesh Grill Provides excellent protection for the speaker

3) Alloy Gasket Made from high quality machined aluminium

4) Alloy Gasket Made from high quality machined aluminium

5) ABS Grill Provides excellent protection for the speaker

6) PEI Tweeter Offers extended high frequency response

7) Silk Dome Super Tweeter Extended high frequency response up to 35kHz

8) TI Tweeter Titanium tweeter for extreme high frequency performance

9) Silk Dome Tweeter For smooth high frequency response

10) SCS SurroundNew cone surround for non circular cones

11) Inverted Surround Offers extended low frequency response

12) PU Surround Polyurethane offers fast, precise damping of the cone

13) PU Dualroll Benefits of PU with improved bass response

14) Highroll Surround Rolled tall to maximise cone area for higher SPL

15) Multi-Roll Achieves better linearity throughout the subwoofer’s excursion range

16) Seamless Surround Seamless look, greater strength

17) Dual Layer Surround 2 types of foam for cone speed and control

18) Absorbing PP Cone For increased depth and clarity of bass

19) IMPP Cone Rigid polypropelene woofer cone for smooth, low bass

20) Fibreglass Kevlar Cone Cone material made from fibreglass and Kevlar

21) Fibreglass Cone Fibreglass woofer cone for clarity of bass

22) Alloy Cone 0.15mm aluminium cone for excellent dynamics

23) One Piece PP Cone For increased depth and clarity of bass

24) Alloy Cone Aluminium cone delivers unmatched weight and dynamics

25) Poly-GlassCone material made from polypropelyne (PP) and fibreglass

26) Carbon Fibre ConeHigh sensitivity and low moving mass

39) Double Magnet Double stacked ferrite magnet for immense power handling

40) Magnet Boot Removable rubber boot for magnet protection

41) Spade Terminals Allows ease of installation

42) Screw Terminal Allows heavy gauge cable to be connected directly to the voice coil

43) Spring Terminal Allows ease of installation for heavy gauge cable

44) Pro Terminal Heavy gauge cable connects directly to the voice coil, easy series/parallel wiring

45) Co-axial Speaker 2-way speaker contains a woofer and built-in tweeter

46) Tri-axial Speaker 3-way speaker contains a woofer, mid-range and tweeter for better clarity

47) Tri-axial Speaker 3-way speaker contains a woofer, mid-range and tweeter for better clarity

48) Component Woofer and tweeter that can be mounted apart for a better sound stage

49) 3-way Component Seperate woofer, mid-range and tweeter provide better clarity

50) Speed Bass Extended low frequency response with high accuracy

51) Power Bass Large power handling for extreme SPL

65) ICC Vented Internal convection cooling technology from internally mounted heatsink fins

66) Pro Audio Superior audiophile sound quality

67) Class AB Low noise, minimal distortion for superior sound quality

68) Class D High efficiency amplifier ideal for bass

69) Class GH Quality of class AB with the efficiency of class D

70) Low Pass Filter Limits the amount of high frequency output

71) High Pass Filter Limits low frequency output

72) Subsonic Filter Limits very low frequency output

73) MOSFET High switching speed and greater stability

74) Chip Protection Microprocessor protects the amplifier

75) High Level Input Connect to speaker output of head unit

76) Remote Gain Amplifier gain can be controlled from the front of the vehicle

77) Strappable Combines the output of two amplifiers into a single channel

78) Linkable Connect two smaller amps to give the appearance of one large amplifier

79) Endcaps Hide amplifier wiring and terminals for improved aesthetics

80) Endcaps Hide amplifier wiring and terminals for improved aesthetics

81) Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire

82) Slick Loaded Slick subwoofer loaded into the enclosure

83) LiteAir Loaded LiteAir subwoofer loaded into the enclosure

84) BlackAir Loaded BlackAir subwoofer loaded into the enclosure

85) BlackDeath Loaded BlackDeath subwoofer loaded into the enclosure

86) N-Wedge Eliminates negative effects of sealed enclosure design

88) Modular Modular system allows single enclosures to be combined into a twin unit

87) N-Wedge Pro Second generation N-Wedge bass enclosure design

89) Pressure Wedge 2 Mount facing or away from passengers

90) Compact Compact enclosure delivers maximum performance in a minimum of space

91) Twin Post Spring loaded terminals

92) Quad Post Spring loaded terminals allow easy conversion from series to paralel wiring

feature LEGEND :

FLATFLEX™ High Definition speaker

cable The delivery of power and signal

to the speaker is the final CriticalLink™

in any audio system

Various lengths available

Bass

Cable

FLATBASS™ 13 SPK Bass speaker cable

There are many powerful bass amplifiers on today’s

market – the ever increasing power is putting huge

strains on speaker wire – VIBE present a new breed

of speaker cable specially developed for BASS

applications. The VIBE FLATBASS speaker cable offers

SolidCores™ that can handle and sustain considerably

more power than conventional speaker cable.

Model: FlatBass 13 SPK

– 13 gauge SolidCore™ flat BASS speaker cable

FLATSTEREO™ High Definition full range

Interconnect

The VIBE FLATSTEREO RCA is an OFC high definition

full range interconnect – delivering the fullest signal

possible from source to amplifier. The cable make

up has been developed to run flat with left and right

cables running parallel both with individual screening

but sharing an outer FLAT jacket, easing installation.

Available in:

Model: FLATSTEREO™ RCA 1m – 1 metre full range

interconnect

Model: FLATSTEREO™ RCA 5m - 5 metre full range

interconnect

FLATBASS™ – SolidCore™ Bass interconnect

The VIBE FLATBASS™ interconnect has been

specifically developed for use in BASS SYSTEMS - the

cable make up has a unique super FLAT™ design easing

installation - its trick ingredient is oversized SolidCore™

OFC signal wires - allowing a heavier voltage to be

passed down the cable. This is the central wire that

carries the main signal from source to amplifier.

Available in:

Model: FLATBASS™ RCA 1m – 1 metre BASS

interconnect

Model: FLATBASS™ RCA 5m - 5 metre BASS

interconnect

Power and

Ground Cable

VIBE FLATLINES™ power cable

has been

developed to maximise voltage

transfer from battery to amplifier.

High Def Speaker Cable

Model: FLATLINES 8 PWR – 8 gauge red power cable

Model: FLATLINES 8 GND – 8 gauge black power cable





FLATFLEX™ High Definition speaker cable

The delivery of power and signal to the speaker is the

final CriticalLink™ in any audio system. VIBE’s FlatFlex

OFC high definition speaker cable is produced from

super fine OFC copper strands collectively picking up

all the detail in your music. The multi strands are

aligned making the cable super FLAT™ which can be

run invisibly under carpets.

Available in:

Model: FlatFlex™ 16 SPK – 16 gauge High definition

flat flexible speaker cable

The VIBE 3000watt BASS KIT is

specifically designed to gain

maximum output from high power

BASS systems. Featuring the best

BASS specific cables from the VIBE

CriticalLink™ Range.

The VIBE 1500watt ACTIVE

BASS KIT is specifically designed

to gain maximum output from

high power Active Bass systems

(Bass Boxes). Featuring BASS

specific components.

• 5 Metre Flat 4awg OFC Power Cable

• 1 Metre Flat 4awg OFC Ground Cable

• 140 Amp Circuit Breaker

• 5 Metre 18awg Remote Wire

• 5 Metre RCA Cable

• Features Mag Plugs

• 3 Metre Flatbass 13 Speaker Cable

• Gold Terminals And Accessories



• 60 Amp Agu Fuse & Fuse Holder



• Vibe Fast Plug


• 5m 8AWG power cable

• 1m 8AWG ground cable

• 5m VIBE SLICK RCA interconnect

• 5m remote turn on cable

• 2 x 5m FLAT16SPK 16AWG speaker cable

• AGU fuseholder

• 60 amp AGU fuse

• 2 x spade terminals

• 6pcs cable ties

The VIBE 1500 watt STEREO KIT

is specifically designed to gain

maximum output from high power

full range systems. Combining the

best full range cables from the

VIBE CriticalLink ™ range.

• Ideal For VIBE Stereo Amplifiers



• 60 Amp Agu Fuse & Fuse Holder



• Features Mag Plugs

• 8 Metre Flatflex 13 Speaker Cable


• 5m 4AWG power cable

• 1m 4AWG ground cable

• 5m VIBE SLICK RCA interconnect

• 5m remote turn on wire

• 2 x 5m FLAT16SPK 16AWG speaker cable

• AGU fuse holder

• 80 amp AGU fuse

• 2 x spade terminals

• 6pcs cable ties

accessories

AGU Fuse Holder

Water proof Fuse holder to be located 12”

approx from battery – holds glass type AGU

fuses and offers reliable system protection. This

is included in stereo kits and active bass kits.

Model: FDAGU–V1 AGU fuse holder

VIBE FLAT Y 2M / FLAT Y 2F RCA Y leads

Our professional quality full range OFC Y-interconnect

guarantees a pure and strong signal. With a flat design

and ferrite loaded gold plated plugs, interference is greatly

reduced. The FLAT-Y Interconnect is available in

Model: FLAT Y 2F – RCA Y lead 1male to 2 female

Model: FLAT Y 2M – RCA Y lead 2male to 1female

VIBE DB6 non fused distribution block

The VIBE DB6 non fused distribution block is a profes-

sional non fused distribution block which gives easy

connection for up to 5 amplifiers.

Model: DB6 non fused distribution block

VIBE enclosure terminals

The VIBE enclosure terminals add a touch of class to any bass

enclosure. All new spring loaded connectors replace the old

screw down type for quicker and tighter clamping of speaker to

a mono amplifier.

Model: TP2 enclosure terminals - 2 posts

Model: QP4 enclosure terminals - 4 posts

VIBE CT0 / CT4 compression fit ring terminal

The VIBE CT range of gold plated ring terminals are profes-

sional compression fit, designed for maximum conductivity

Model: CT0 – 0 gauge compression fit ring terminal

Model: CT4 – 4 gauge compression fit ring terminal

VIBE AGU30, AGU60, AGU80 fuses

The VIBE AGU fuse series are the perfect companion to the VIBE FD4

distribution block and the Active and Stereo systems

Model: AGU30 – 1 pair 30 amp AGU fuses to fit all AGU fuse holders



Active amplifier remote

The optional remote control for the VIBE active amplifier

range takes control and tweakability to the next level.

Not only does the active amplifier give the user full

control over the amplifier gain but also the low pass

crossover filter allowing fine adjustments of both level

and frequency bandwidth from the front of the vehicle.

Model: BBR10 – optional remote for use with Bass 1,

Bass 2 active amplifiers

REM-2

BC10

Control your bassamplifiers gain

remotely with theBC10 levelcontroller

VIBE BC10 level controller

The VIBE BC10 gain level controller is a perfect

addition to any subwoofer system, The BC10 allows

the level of the amplifier to be controlled from the

driver’s seat, giving the user easy adjustment of

gain level whenever required, particularly useful for

adjusting the gain level for amplifiers controlling

subwoofers. The BC10 controller is RCA input and

output making it compatible with any system and

allowing gain level adjustment of any amplifier it is

connected to. It can also be used with full range

amplifiers to control the volume of front, rear

speakers.

Model: BC10 – RCA Gain level control

BASS remote

The VIBE bass remote allows bass boost adjustment of

the amplifier from the front of the car. Simply plug the

supplied cable into the remote port on the end panel of

the amplifier and remote bass boost control is yours, it is

that easy.

Model: SLICK REM2 – for use with Slick a0 a1

Model: BBR09 - BlackAir stereo 2 & stereo 4

VIBE 140 amp circuit breaker

Big systems require big protection. The VIBE circuit

breaker is rated at a massive 140 amps and offers

critical protection to your system – if the system over

powers or short circuits the breaker will cut in and save

your system

Model: CB140 – 140 amp circuit breaker

RCA MAG Plugs

Gold plated VIBE MagPlugs™ ensure that the signal is

passed from device to device with a high rate of

conductivity. MagPlugs™ are Ferrite Loaded™ and

feature rubber grips and an ultra small design allow-

ing easy installations.

Model: MP-V1

VIBE FD4 fused distribution block

The VIBE FD4 fused distribution block is a professional

AGU fused distribution block which gives easy

connection for up to 4 amplifiers.

Model: FD4 – 4 way AGU fused distribution block, 1 x

4gauge input 4 x 8 gauge outputs

VIBE RT4 / RT8 crimp on ring terminal

The professional range of VIBE RT ring terminals for

connecting power cable to the vehicle battery.

Model: RT8 – 1 pair of 8 gauge crimp on ring terminals

with PVC overboots

Model: RT4 – 1 pair of 4 gauge crimp on ring terminals

with PVC overboots

VIBE PortPlug

The VIBE PortPlug allows easy tuning of the VIBE EVO

bass enclosures. The PortPlug™ is used to tightly seal

the VIBE TurboPort™ in the enclosure.

Model: PP25 – PortPlug™ for 2.5” TurboPort™

Model: PP30 - PortPlug™ for 3” TurboPort™

The VIBE TurboPort™ is the only choice for professional vented

or bandpass enclosures.

Model: TPX25 – TurboPort™ 2.5” Diameter – 150mm Length

Model: TPX30s – TurboPort™ 3” Diameter - 150mm Length

Model: TPX30L – TurboPort™ 3” Diameter - 255mm Length

Model: TPX40s – TurboPort™ 4” Diameter - 240mm Length

Model: TPX40L – TurboPort™ 4” Diameter - 320mm Length

This line drivercan split one input

into three highvoltage outputs –

perfect for multichannel and

SPL systems.

Features

• New 1.5 farad capacitor has 50% more capacitance

than the previous model.

• New power distribution block allows 2 x 4 AWG

negative inputs.

2 x 4 AWG positive inputs and 2 x 8 AWG positive

inputs.

• Accurate digital voltage display with auto turn on/off.

• Lowest ESR of any capacitor on the market today.

• Can improve low end bass response in car audio

systems.

• Ideal for large bass systems that typically struggle

with poor current delivery from the battery.

Features

• Single stereo input with adjustable gain up to

20dB.

• Three stereo outputs with independently

adjustable gain up to 9 volts.

• Allows precise control of up to 12 amplifiers –

ideal for SPL systems.

• Isolated outputs provide clean sound with zero

crosstalk.

• Ultra low THD of only 0.015%.

• Excellent signal to noise ratio better than 100dB.

Bass Generator

The VIBE Fastplug is a quick release

car amplifier connector.

Ideal for use with active bass

enclosures, The VIBE fastplug

allows fast, safe, convenient removal

for when boot space is required.

IN

CLICK

OUT

!WARNING :

This product is capable of causing permanent

damage to your subwoofer and audio system.

VIBE will not be held responsible for any damage

caused to your audio system by the misuse of this

product.

vibeaudio.co.uk

vibe car audio 2012 product brochure

Documents

slick bass

watts4 x

wattsnana2 x

163mm2 x

3ozn354 x

watts2 x

hz litebox bass

includedslick stereo