vic_readings rwg forms 2-21-12 1

7/28/2019 VIC_Readings RWG Forms 2-21-12 1

1/20

Column1 Feedback 1 Feed back 2

wire size 29 gage 29 gage

wire length in feet 140 140

wire resantce (calculated) 11.5 11.5

wire resantce (Measured off core) 9.7 9.6

number count on counter 322 322

inductance on ferite core (100hz)

inductance on iren core (100hz) 19.4mh 9.8mhinductance no core (100hz)

Red is the start of the Coil wind

black is the end of the coil wind

white is the center tap of the pickup

wire size

wire length in feet

wire resantce (calculated)

wire resantce (Measured off core)

number count on counter

wire resantce (Measured on core)

inductance no core (100hz)inductance on ferite core (100hz)

inductance on iron core (100hz)

wire size

wire length in feet




ire resantce (Measured on iron core)

inductance no core (100hz)



ire resantce (Measured on frite core)

wire size

wire length in feet




ire resantce (Measured on iron core)




ire resantce (Measured on frite core)


2/20


3/20

Column1 Feedback 1 Feed back 2

wire size 29 gage 29 gage

number turns

wire resantce on iron (100hz)

wire resantce on iron (120hz)

wire resantce on iron (1khz)

wire resantce on iron (10khz)

inductance no iron (100hz)

inductance no iron (120hz)

inductance no iron (1khz)

inductance no iron (10khz)

capacitance iron (100hz)

capacitance iron (120hz)capacitance iron (1khz)

capacitance iron (10khz)

wire resantce on iron (fluke)

wire resantce on air core (100hz)

wire resantce on air core (120hz)

wire resantce on air core (1khz)

wire resantce on air core (10khz)

inductance on air core (100hz)

inductance on air core(120hz)


4/20

inductance on air core (1khz)

inductance on air core (10khz)

capacitance on air core(100hz)

capacitance on air core(120hz)

capacitance on air core (1khz)

capacitance on air core(10khz)

wire resantce on iron (fluke)


5/20


6/20


7/20

Secondary Choke 1 Choke 2 Primary

29 gage 29 gage 29 gage 29 gage

938 938 938 128

76.7 76.7 76.7 10.5

61.8 61.8 61.8 9

2139 2139 2139 294.4

438mh 441mh 431mh 22.8mh120mh 119.6mh 3.6mh

Secondary #2 Choke 1 #2 Choke 2 #2

35 29 gage 29 gage

6,350 1538 1538

2.144 101.6

14,605 2139 + 1400 2139 + 1400

5.35H 290mh 290mh18.8H 915mh 870mh

Secondary #3

32

469 ohm

958mh

3380mh

2810mh

Secondary #4

29

1538

103.1

3539

285mh

875mh

738mh


8/20


9/20

Secondary Choke 1 Choke 2 Primary

29 gage 29 gage 29 gage 29 gage

2100 2100 2100 600

337.6 @ 1.7825 329.9 @ 1.7833 327.9 @1.7882 22.6 @1.0196

385 @ 1.7839 377.9 @ 1.7922 375.6 @ 1.7955 25.8 @ 1.0727

1.6856 K @ 1.9594 1.722K @ 2.0497 1.676K @ 2.0128 112.6 @ 1.4851

12.168 k @ 2.7865 13.022K @ 2.9283 12.78K @ 2.9338 661.9 @ 2.1104

301.4 mH @ 1.7825 294.67 mH @ 1.7827 292.5 mH @ 1.7877 23.26 mH @ 1.0196

286.33 mh @ 1.784 279.79 mH @ 1.7918 277.54mH @ 1.7955 31.99 mh @ 1.0728

136.92 mh @ 1.9592 133.78 mH @ 2.0496 132.52mH @2.0129 12.074 mH @ 1.485

69.51mH @ 2.7863 70.79 mH @ 2.9284 69.31mH @ 2.9333 4.99 mH @ 2.1093

8.402 uF @ .5610 8.592 uF @ .5611 8.672 uF @ .5595 71.82 uF @ .9806

6.143 uf @ .5606 6.285 uf @ .5582 6.338 uF @ .5571 54.97 uF @ .9321184.9 nF @ .5104 189.3 nF @ .4879 191.1 nF @ .4968 2.097 uF @ .6735

3.644 nF @ .3590 3.578 nF @ .3415 3.654 nF @ .3409 50.75 nF @ .4741

34.7 35 34.9 7.7

53.52 @ .7477 54.4 @ .7562 54.14 @ .7563 7.7 @ .1919

61.95 @ .8967 63.09 @ .9071 62.8 @ 9.073 7.829 @ .2301

1.9418k @ 7.4313 2.0006 K @ 7.5111 1.9913 K @ 7.51135 34.78 @ 1.9177

126.07k @ 48.902 130 k @ 49.592 129.8k @ 49.129 2.6026 k @ 18.146

113.95mH @ .7476 114.54mH @ .7560 113.98mH @ .7561 63.96 mH @ .1918

91.62 mH @ .8968 92.28 mH @ .9069 91.83mH @ .9071 45.14mH @ .2301

New square VIC
mailto:[email protected]:[email protected]


10/20

41.59mH @ 7.4286 42.39mH @ 7.5019 42.19mH @ 7.5090 2.8874 mH @ 1.9169

41.31 mH @ 48.877 42.07mH @ 49.244 41.86mH @ 49.129 2.278mH @ 18.165

22.22uF @ 1.3378 22.11uF @ 1.3230 22.21 uF @ 1.3228 39.54 uF @ 5.2178

19.19uF @ 1.1151 19.05uF @ 1.1028 19.15 uF @ 1.1027 38.92 uF @ 4.3490

609.0nF @ .1346 597.5 nF @ .1332 600.3 nF @ .1332 8.770 uF @ .5220

6.131 nF @ .0205 6.020 nF @ .0202 6.050 nF @ .0202 111.1 nF @ .0552

34.5 34.9 34.7 7.6


11/20


12/20


13/20

capacitor values Building Notes

f

Empty

.038nF

Distild

145nF

distled

27nf

used destiled

90nf

13mohm

primarry indutanca testing, Not big enuff stepup. Looking

for a 30:1 step up in indutcance. Thats where I have

secondary and a #. This was defrent wire sizes and lengths.

All so I can got to 30:1

I beleave I will be building a new VIC bobbin with an 3/8"

core. this way i can have more room for defrent cores. the1/4" core is not bigh enugh , and thus i'm going with 3/8"

the pickup coil is one coil with a center tap.


14/20


15/20

capacitor values Building Notes

No Water

27pF @ .3392

15pF @ .0427

15.5pF @ .0064

15.47pF @ .0005

Distiled water

63.85n @ 33.299

48.35 nf @ 37.3022.347 nF @ 93.000

1014.8pF @ 21.283

the primary ans secondary is wound clockwise

the c1 and c2 are wound counter clockwise

all coils open mesured and meter on pal

the water cap is identacal to stans in its dimentions. The

only thing defrent is that im using .032" wall thickness

instead of .030"


16/20


17/20


18/20


19/20

Feedback 1 Feed back 2 Secondary

wire size

wire length in feet





inductance on iren core (100hz)



20/20

vic_readings rwg forms 2-21-12 1

Documents