victaulic 27.03
DESCRIPTION
Piping CouplerTRANSCRIPT
1969 Rev.B 11/01 ® Registered Trademark Victaulic © Copyright 2001 Victaulic Printed in U.S.A.
Victaulic Company of AmericaPhone: 1-800-PICK-VIC (1-800-742-5842)Fax: 610-250-8817e-mail:[email protected]
Victaulic Company of CanadaPhone: 905-884-7444Fax: 905-884-9774e-mail: [email protected]
Victaulic America LatinaPhone: 610-559-3300Fax: 610-559-3608e-mail: [email protected]
Victaulic Asia PacificPhone: 65-6235-3035Fax: 65-6235-0535e-mail: [email protected]
Victaulic EuropePhone: 32-9-381-1500Fax: 32-9-380-4438e-mail: [email protected]
VICTAULIC® IS AN ISO 9001 CERTIFIED COMPANY
R
NominalPipeSize
Weight of: Weight of: NominalPipeSize
Weight of: Weight of:
Std. Pipe Water XS Pipe Water Std. Pipe Water XS Pipe Water
³⁄₄
11
¹⁄₄
1.1311.6792.273
.231
.374
.648
1.4742.1722.997
.187
.311
.555
68
10
18.98028.56040.500
12.51021.68034.100
28.58043.40054.700
11.29019.80032.300
1
¹⁄₂
22
¹⁄₂
2.7183.6535.794
.8821.4532.073
3.6325.0227.662
.7651.2781.835
121416
49.60054.60062.600
49.00059.70079.100
65.40072.10082.800
47.00057.50076.500
33
¹⁄₂
45
7.5809.110
10.79014.620
3.2004.2805.5108.660
10.25012.51014.99020.780
2.8603.8504.9807.880
18202430
70.60078.60094.600
118.700
101.200126.000183.800291.000
93.500104.100125.500157.600
98.300122.800179.900286.000
ANSI COMMERCIAL PIPE SIZES AND WALL THICKNESSES
The following table lists the pipe sizes and wall thicknesses currently established as standard, or specifically:1. The traditional standard weight, extra strong, and double extra strong pipe.2. The pipe wall thickness schedules listed in American Standard B36.10, which are applicable to carbon steel.3. The pipe wall thickness schedules listed in American Standard B36.19, and ASTM Specification A409, which are applicable only to corrosion
resistant materials (NOTE: Schedule 10S is also available in carbon steel in sizes 12" and smaller.)
Nom.PipeSize O.D.
Nominal Wall Thickness
Sched.5S*
Sched.10S*
Sched.10
Sched.20
Sched.30
Stan-dard
Sched.40
Sched.60
ExtraStrong
Sched.80
Sched100
Sched.120
Sched.140
Sched.160
XXStrong
¹⁄₈¹⁄₄
0.4050.540
––
0.0490.065
––
––
––
0.0680.088
0.0680.088
––
0.0950.119
0.0950.119
––
––
––
––
––
³⁄₈¹⁄₂
0.6750.840
–0.065
0.0650.083
––
––
––
0.0910.109
0.0910.109
––
0.1260.147
0.1260.147
––
––
––
–0.188
–0.294
³⁄₄
11.0501.315
0.0650.065
0.0830.109
––
––
––
0.1130.133
0.1130.133
––
0.1540.179
0.1540.179
––
––
––
0.2190.250
0.3080.358
1
¹⁄₄
1
¹⁄₂
1.6601.900
0.0650.065
0.1090.109
––
––
––
0.1400.145
0.1400.145
––
0.1910.200
0.1910.200
–– – –
–0.2500.281
0.3820.400
22
¹⁄₂
2.3752.875
0.0650.083
0.1090.120
––
––
––
0.1540.203
0.1540.203
––
0.2180.276
0.2180.276
––
––
––
0.3440.375
0.4360.552
33
¹⁄₂
3.5004.000
0.0830.083
0.1200.120
––
––
––
0.2160.226
0.2160.226
––
0.3000.318
0.3000.318
––
––
––
0.438–
0.600–
45
4.5005.563
0.0830.109
0.1200.134
––
––
––
0.2370.258
0.2370.258
––
0.3370.375
0.3370.375
––
0.4380.500
––
0.5310.625
0.6740.750
68
6.6258.625
0.1090.109
0.1340.148
––
–0.250
–0.277
0.2800.322
0.2800.322
–0.406
0.4320.500
0.4320.500
–0.594
0.5620.719
–0.812
0.7190.906
0.8640.875
1012
10.75012.750
0.1340.165
0.1650.180
––
0.2500.250
0.3070.330
0.3650.375
0.3650.406
0.5000.562
0.5000.500
0.5940.688
0.7190.844
0.8441.000
1.0001.125
1.1251.312
1.0001.000
14 O.D.16 O.D.
14.00016.000
0.1560.165
0.1880.188
0.2500.250
0.3120.312
0.3750.375
0.3750.375
0.4380.500
0.5940.656
0.5000.500
0.7500.844
0.9381.031
1.0941.219
1.2501.438
1.4061.594
––
18 O.D.20 O.D.
18.00020.000
0.1650.188
0.1880.218
0.2500.250
0.3120.375
0.4380.500
0.3750.375
0.5620.594
0.7500.812
0.5000.500
0.9381.031
1.1561.281
1.3751.500
1.5621.750
1.7811.969
––
22 O.D.24 O.D.
22.00024.000
0.1880.218
0.2180.250
0.2500.250
0.3750.375
0.5000.562
0.3750.375
–0.688
0.8750.969
0.5000.500
1.1251.218
1.3751.531
1.6251.812
1.8752.062
2.1252.344
––
26 O.D.28 O.D.
26.00028.000
––
––
0.3120.312
0.5000.500
–0.625
0.3750.375
––
––
0.5000.500
––
––
––
––
––
––
30 O.D.32 O.D.
30.00032.000
0.250–
0.312–
0.3120.312
0.5000.500
0.6250.625
0.3750.375
–0.688
––
0.5000.500
––
––
––
––
––
––
34 O.D.36 O.D.
34.00036.000
––
––
0.3120.312
0.5000.500
0.6250.625
0.3750.375
0.6880.750
––
0.5000.500
––
––
––
––
––
––
42 O.D. 42.000 – – – 0.375 – – – – 0.500 – – – – – –
All dimensions are given in inches. *The above is applicable to ANSI piping only, consult approprate international standards for other systems.*Schedule 5S and 10S are available in corrosion resistant materials and Schedule 10S is also available in carbon steel.The decimal thicknesses listed for the respective pipe sizes represent their nominal or average wall dimensions. The actual thicknesses may be as much as 12.5% under the nominalthickness because of mill tolerance. Thicknesses shown in light face for Schedule 60 and heavier pipe are not currently supplied by the mills, unless a certain minimum tonnage isordered.
VICTAULIC PIPING SYSTEMSDESIGN AIDS
27.03
Pipe Wall Thicknessesand Weight Charts
PIPE AND WATER WEIGHT PER LINE FOOT
27.03 - 2
WATER PRESSURE TO FEET HEAD
NOTE: One pound of pressure per square inch of water equals 2.309 feet of water at 62°Fahrenheit. Therefore, to find the feet head of water for any pressure not given in the tableabove, multiply the pressure pounds per square inch by 2.309.
STANDARD CAST IRON COMPANION FLANGES & BOLTS
(For working pressures up to 125 PSI steam, 175 PSI WOG)
EXTRA HEAVY CAST IRON COMPANION FLANGES & BOLTS
(For working pressures up to 250 PSI steam, 400 PSI WOG)
PoundsPer Sq. Inch
FeetHead
PoundsPer Sq. Inch
FeetHead
12345
2.314.626.939.24
11.54
100110120130140
230.90253.93277.07300.16323.25
6789
10
13.8516.1618.4720.7823.09
150160170180200
346.34369.43392.52415.61461.78
1520253040
34.6346.1857.7269.2792.36
250300350400500
577.24692.69808.13922.58
1154.48
5060708090
115.45138.54161.63184.72207.81
600700800900
1000
1385.391616.301847.202078.102309.00
SizeDiameterof Flange
Dia. of Bolt Circle
No. ofBolts
Size ofBolts
Lengthof Bolts
³⁄₄
11
¹⁄₄
1
¹⁄₂
2
3
¹⁄₂
4
¹⁄₄
4
⁵⁄₈
56
2
¹⁄₂
3
¹⁄₈
3
¹⁄₂
3
⁷⁄₈
4
³⁄₄
44444
³⁄₈¹⁄₂¹�₂¹⁄₂⁵⁄₈
1
³⁄₈
1
¹⁄₂
1
¹⁄₂
1
³⁄₄
2
2
¹⁄₂
33
¹⁄₂
45
77
¹⁄₂
8
¹⁄₂
910
5
¹⁄₂
67
7
¹⁄₂
8
¹⁄₂
44888
⁵⁄₈⁵⁄₈⁵⁄₈⁵⁄₈³⁄₄
2
¹⁄₄
2
¹⁄₂
2
¹⁄₂
2
³⁄₄
3
681012
1113
¹⁄₂
1619
9
¹⁄₂
11
³⁄₄
14
¹⁄₄
17
881212
³⁄₄³⁄₄⁷⁄₈⁷⁄₈
33
¹⁄₄
3
¹⁄₂
3
³⁄₄
1416
2123
¹⁄₂
18
³⁄₄
21
¹⁄₄
1216
11
4
¹⁄₄
4
¹⁄₄
SizeDiameterof Flange
Dia. of Bolt Circle
No. ofBolts
Size ofBolts
Lengthof Bolts
11
¹⁄₄
1
¹⁄₂
22
¹⁄₂
4
⁷⁄₈
5
¹⁄₄
6
¹⁄₈
6
¹⁄₂
7
¹⁄₂
3¹⁄₂
3
⁷⁄₈
4
¹⁄₂
55
⁷⁄₈
44488
⁵⁄₈⁵⁄₈³⁄₄⁵⁄₈³⁄₄
2
¹⁄₄
2
¹⁄₂
2
¹⁄₂
2
¹⁄₂
3
33
¹⁄₂
456
8
¹⁄₄
91011
12
¹⁄₂
6⁵⁄₈
7
¹⁄₄
7
⁷⁄₈
9
¹⁄₄
10
⁵⁄₈
888812
³⁄₄³⁄₄³⁄₄³⁄₄³⁄₄
3
¹⁄₄
3
¹⁄₄
3
¹⁄₂
3
³⁄₄
3
³⁄₄
81012
14 O.D.16 O.D.
1517
¹⁄₂
20
¹⁄₂
2325
¹⁄₂
1315
¹⁄₄
17
³⁄₄
20
¹⁄₄
22
¹⁄₂
1216162020
⁷⁄₈
11
¹⁄₈
1
¹⁄₈
1
¹⁄₄
4¹⁄₄
55
¹⁄₂
5
³⁄₄
6
18 O.D.20 O.D.24 O.D.30 O.D.36 O.D.
2830
¹⁄₂
364350
24
³⁄₄
2732
39
¹⁄₄
46
2424242832
1
¹⁄₄
1
¹⁄₄
1
¹⁄₂
1
³⁄₄
2
6
¹⁄₄
6
³⁄₄
7
¹⁄₂
8
¹⁄₂
9
¹⁄₂
42 O.D.48 O.D.
5765
52
³⁄₄
60
³⁄₄
3640
22
1011
FEET HEAD OF WATER TO PSI
NOTE: One foot of water at 62° Fahrenheit equals .433 pound pressure per square inch.To find the pressure per square inch for any feet head not given in the table above, mul-tiply the feet head by .433.
DECIMAL EQUIVALENTS OF FRACTIONS
MINUTES CONVERTED TO DECIMALS OF A DEGREE
FeetHead
PoundsPer Sq. Inch
FeetHead
PoundsPer Sq. Inch
12345
.43
.871.301.732.17
100110120130140
43.3147.6451.9756.3060.63
6789
10
2.603.033.463.904.33
150160170180200
64.9669.2973.6377.9686.62
1520253040
6.508.66
10.8312.9917.32
250300350400500
108.27129.93151.58173.24216.55
5060708090
21.6525.9930.3234.6538.98
600700800900
1000
259.85303.16346.47389.78433.00
Inches Decimal of an Inch Inches Decimal of an Inch
¹⁄₆₄¹⁄₃₂³⁄₆₄¹⁄₁₆⁵⁄₆₄
.015625.03125.046875.0625
.078125
³³⁄₆₄¹⁷⁄₃₂³⁵⁄₆₄⁹⁄₁₆³⁷⁄₆₄
.515625.53125.546875.5625
.578125
³⁄₃₂⁷⁄₆₄¹⁄₈⁹�₆₄⁵⁄₃₂
.09375.109375
.125.140625.15625
¹⁹⁄₃₂³⁹⁄₆₄⁵⁄₈
⁴¹⁄₆₄²¹⁄₃₂
.59375.609375
.625.640625.65625
¹¹⁄₆₄³⁄₁₆¹³⁄₆₄⁷⁄₃₂¹⁵⁄₆₄
.171875.1875
.203125.21875.234375
⁴³⁄₆₄¹¹⁄₁₆⁴⁵⁄₆₄²³⁄₃₂⁴⁷⁄₆₄
.671875.6875
.703125.71875.734375
¹⁄₄¹⁷⁄₆₄⁹⁄₃₂¹⁹⁄₆₄⁵⁄₁₆
.25.265625.28125.296875.3125
³⁄₄⁴⁹⁄₆₄²⁵⁄₃₂⁵¹⁄₆₄¹³⁄₁₆
.75.765625.78125.796875.8125
²¹⁄₆₄¹⁄₃
¹¹⁄₃₂²³⁄₆₄³⁄₈
.328125.333
.34375.359375
.375
⁵³⁄₆₄²⁷⁄₃₂⁵⁵⁄₆₄⁷⁄₈
⁵⁷⁄₆₄
.828125.84375.859375
.875.890625
²⁵⁄₆₄¹³⁄₃₂²⁷⁄₆₄⁷⁄₁₆²⁹⁄₆₄
.390625.40625.421875.4375
.453125
²³⁄₃₂⁵⁹⁄₆₄¹⁵⁄₁₆⁶¹⁄₆₄³¹⁄₃₂
.90625.921875.9375
.953125.96875
¹⁵⁄₃₂³¹⁄₆₄¹⁄₂
.46875.484375
.5
⁶³⁄₆₄
1.984375
1.
Min. Deg. Min. Deg. Min. Deg. Min. Deg. Min. Deg. Min. Deg.
12345
.0166
.0333
.0500
.0666
.0833
1112131415
.1833
.2000
.2166
.2333
.2500
2122232425
.3500
.3666
.3833
.4000
.4166
3132333435
.5166
.5333
.5500
.5666
.5833
4142434445
.6833
.7000
.7166
.7333
.7500
5152535455
.8500
.8666
.8833
.9000
.9166
6789
10
.1000
.1166
.1333
.1500
.1666
1617181920
.2666
.2833
.3000
.3166
.3333
2627282930
.4333
.4500
.4666
.4833
.5000
3637383940
.6000
.6166
.6333
.6500
.6666
4647484950
.7666
.7833
.8000
.8166
.8333
5657585960
.9333
.9500
.9666
.98331.0000