video surveillance: legally blind? peter kovesi school of computer science & software...
TRANSCRIPT
Video Surveillance:Legally Blind?
Peter KovesiSchool of Computer Science & Software Engineering
The University of Western Australia
Questions
• What image quality do we need for identification?
• How do you measure image quality?
• What is the image quality from a video camera?
• What is the effect on image quality when you: • record to video tape? • use image compression?
Humans are very bad at recognizing unfamiliar faces
• Kemp, Towell and Pike (1997) tested the value of having photos on credit cards. When a user presented a card with a photograph of someone else that had some resemblance to the user, they were challenged less than 40% of the time.
• Bruce et al. (1999, 2001) have tested the ability of people to match good quality CCTV images of unfamiliar faces under a variety of scenarios. Correct recognition rates are typically only 70-80%.
Good quality photograph of target
Array of 10 good quality CCTV images
Bruce et al (1999).
Is this person in the array?If they are present match the person.
Good quality photograph of target
Array of 10 good quality CCTV images
Bruce et al (1999).
Is this person in the array?If they are present match the person.
Good quality photograph of target
Array of 10 good quality CCTV images
When target was present in the array. 12% picked wrong person and 18% said they were not present (overall only 70% correct).
When target was not present in the array 70% still matched the target to someone in the array.
Bruce et al (1999).
Is this person in the array?If they are present match the person.
• Face recognition performance by humans is poor.
• Face recognition performance by machine is becoming quite good - but only if the images are of good quality.
• Surveillance video rarely provides good quality images.
• Face recognition performance by humans is poor.
• Face recognition performance by machine is becoming quite good - but only if the images are of good quality.
• Surveillance video rarely provides good quality images.
What image quality is needed for face identification?
Image quality is defined by many attributes
• Minimum feature size that can be resolved
• Noise level
• Quality of luminance reproduction
• Quality of colour reproduction.
(Hayes, Morrone and Burr 1986)(Costen, Parker and Craw 1996)(Nasanen 1999)
In humans it has been found that face recognition is tuned to a set of spatial frequencies ranging from about 20 cycles per face width down to about 5 cycles per face width.
20 cycles
10 cycles
5 cycles
Human Face Recognition
Maximum sensitivity is centred around 8 to 13 cycles/face width.
To recognize with confidence you need to be able to resolve down to 20 cycles/face width
(Hayes, Morrone and Burr 1986)(Costen, Parker and Craw 1996)(Nasanen 1999)
In humans it has been found that face recognition is tuned to a set of spatial frequencies ranging from about 20 cycles per face width down to about 5 cycles per face width.
~ 160mm
20 cycles
10 cycles
5 cycles
Human Face Recognition
8mm
16mm
Maximum sensitivity is centred around 8 to 13 cycles/face width.
To recognize with confidence you need to be able to resolve down to 20 cycles/face width
1951 USAF Chart
Groupings of 6 pairs of bars. Each successive set is half the size of the previous.
1951 USAF Chart
Groupings of 6 pairs of bars. Each successive set is half the size of the previous.
16mm
8mm
Eye charts also provide a simple way of measuring the minimum feature size that can be resolved.
20/20 Vision…
… or in metric, 6/6 vision
Snellen fraction66
Distance at which you should be able to read the line
Distance at which you can read the line on the chart
Minimum Angle of Resolution
Ian Bailey and Jan Lovie
The logMAR chart
88mm
72mm
58mm
36mm
44mm
6/6
6/12
6/24
6/48
Snellenfraction
Letter height
Number plate letters 80mm
Average eye spacing 65mm
9mm
18mm
6/60(legally blind)
Tests conducted with Pulnix TM6CN 1/2” CCD camera positioned 6m from the target.
Images were digitized directly from the camera using a Data Translation 3155 frame grabber
C-mount lenses: 4mm6mm8.5mm12.5mm 16mm
4mm lens
6mm lens
8.5mm lens
12.5mm lens
16mm lens
Camera image recorded to video, then played back and digitized. (Look at the USAF chart)
Camera image digitized directly.
Expect to lose quality when images are recorded to video
(cropped images taken with 12.5mm lens)
Compression is problematic.
Test targets survive compression well, but faces do not.
JPEG image quality 0 (14kB) JPEG image quality 4 (24kB)
Original PNG image (190kB)
JPEG images compressed using Photoshop. Image ‘quality’ can range from 0 - 12
JPEG (14kB) JPEG (24kB) Original
Faces do not survive compression well
What Does Compression Do?
• Image is divided into 8x8 blocks.
• Discrete Cosine Transform is applied to each block.
• The transform coefficients are quantized, many will be rounded to zero.
• When reconstructed, the amplitude and phase of the spatial frequencies within each 8x8 block will be altered. The 64 basis functions of an 8x8
Discrete Cosine Transform
JPEG and MPEG
12.5mm lens at 6m
No compression
~ 40 pixels
12.5mm lens at 6m
18:1 compression
12.5mm lens at 6m
18:1 compression
12.5mm lens at 6m
31:1 compression
12.5mm lens at 6m
31:1 compression
40 pixels across face= 5 DCT blocks
Spatial frequencies from 5 cycles/face width upwardsare all corrupted
This is exactly the range that is most important for face recognition!
A Real Surveillance Camera Installation…
4.8 m
Image quality is defined by many attributes
• Minimum feature size that can be resolved
• Noise level
• Quality of luminance reproduction
• Quality of colour reproduction.
Original laser scannedfaces
Same shape, varying pigmentation
Same pigmentation,varying shape
(Russell et al 2007)
Luminance and colour cues are at least as important as shape cues
People perform about equally well using just shape information or just pigmentation cues.
Hue values as greyscale
16 x16 macro-blocks
Image compression typically quantizes colour information very heavily…
Conclusions
• Surveillance video, as it is currently used, is almost useless for identification.
• Face recognition in low resolution images is badly affected by compression artifacts.
• Image quality standards are needed for surveillance camera installations.
Conan O’BrienUS talk show host
Tarja HalonenPresident of Finland