videocitofonia e videocontrollo
DESCRIPTION
Video, citofonia y controlTRANSCRIPT
-
386 Video door entry and home video surveillance systemMY HOME
-
CONTENTSCONTENTSCONTENTSCONTENTS
Video door entry and home video surveillance system MY HOME 387
MY HOME - Video door entry and home video surveillance system
General features 388
General rules for installation 408
Wiring diagrams 422
-
22
2
2
2211
33
44
388 Video door entry and home video surveillance systemMY HOME
The 2 wire video door entry system
uses the same SCS BUS technology of
all the MY HOME applications
Regardless of system complexity, the
functions needed, and the number
of video handsets, all the devices are
connected using the same 2 wire
cable, and are configured univocally
In order to increase the system
safety level, it is possible to connect
2 wire indoor and outdoor cameras,
the which images will be displayed
directly on the video handsets (home
video surveillance function) If a
higher level of safety is required, it
will be possible to associate an IR
sensor of the burglar-alarm system
to each sensor In this way, in case
riser (2 WirES)
of trespassing, both the camera
and the video handset will activate
automatically In order to complete
a 2 wire video door entry system, in
addition to the Outdoor pushbutton
panel and the handsets, a few
accessory will be needed, connected
to the 2 wire BUS
Floor shunt
System expansion module
Electric distribution board or My Home Flatwall
Entrance panel
System composition
GENERAL FEATURES
-
22
2
2
2
2
66
55
66
2
666
Video door entry and home video surveillance system MY HOME 389
rOOM 1
rOOM 2
rOOM 3
rOOM 4
1. ENTrANCE pANEL: sends the call to the video handset(s)
(available in various look and
installation models)
2. SYSTEM EXpANSION MODuLE: it can be used to increase the
performance of the system, for
example to increase the distance
between the outdoor pushbutton
panel and the video handsets
3. ELECTrIC DISTrIBuTION BOArD Or MY HOME FLATWALL:It enables the user to install DIN
devices:
SYSTEM POWER SUPPLY: powers the
BUS and all the devices
AUDIO/VIDEO NODE: mixes the
audio and video signals from external
sources (entrance panels, cameras,
sound sources ) and retransmits
them on the 2 WIRE riser (in
alternative the audio/video matrix
can also be used)
4. FLOOr SHuNT:used for star-connecting 4
apartments, hence saving a lot of
cable In addition, it lets you reach the
maximum extension of the system
5. ApArTMENT INTErFACE:used for isolating the apartment
from the riser In this way, inside
the apartment it will be possible
to install an independent system
with the corresponding MY HOME
applications
6. VIDEO HANDSETS:audio-video terminal which enables
you to receive calls and to see who
is calling Using the icons of the
OSD menu it is possible to manage
and control MY HOME applications
(Available in various look and
installation models)
Axolute Nighter video station
Axolute Eteris Video display
The apartment interface enables creating an independent system inside the apartment.in this way, it is possible to install apartment handsets with simultaneous switching on, entrance panels and dedicated cameras.
Polyx Memory display Video handset
Apartment interface
-
390 Video door entry and home video surveillance systemMY HOME
GENERAL FEATURES
The 2 wire system can be used to
create any type of systems, both for
the villa and the apartment complex
Entrance panel
Furthest handset
3900 Apartments 3900 Apartment video entrance panel
5 Handsets for apartment 39risers with indepedent
sound mode
96 Video entrance panel
Simple installation
600 metres
THE SYSTEM MAY INCLuDE:
-
Video door entry and home video surveillance system MY HOME 391
Devices
INDOOr CAMErAS
2 WIRE indoor colour camera that can
be connected directly to the system
SCS BUS Microphone for the room
monitoring function Available in the
AXOLUTE, LIVING, LIGHT and LIGHT
TECH versions To be completed with
the corresponding front cover plates
Flush mounted entrance panel
outdoor Axolute entrance panel
Wall entrance panel
Axolute Nighter & Whice Video Station
Axolute video display
Polyx memory display
cameras with front cover plates
ENTrANCE pANEL
Outdoor video pushbutton panel
with colour camera It can be used
to call the video handsets and
to activate the associated door
lock Available in various look and
installation models
VIDEO HANDSETS
Video handsets for the audio and
video reception of entrance panel
calls Their icons allow the user
to manage the video door entry
system, and the MY HOME functions
Available in various look and
installation models
-
392 Video door entry and home video surveillance systemMY HOME
GENERAL FEATURES
OuTDOOr CAMErA
2 WIRE outdoor colour camera with
6 mm fixed optics to be connected
directly to the SCS BUS
Protection index: IP65
FLOOr SHuNT
The floor shunt can be used to
create star wiring systems Its use
is compulsory for installation in
simultaneous switching on systems
SYSTEM EXpANSION MODuLE
Used to increase the number of video
handsets connected to the system
and to achieve maximum installation
distance
Devices
Floor shunt
outdoor camera
Apartment interface
ACTuATOrS
Used for the control of electric locks,
or the management of generic loads
(e g staircase lights, call repetition,
etc )
door lock actuator
System expansion module
Actuator for generic loads
ApArTMENT INTErFACE
To create a dedicated system inside
the Apartment, separate from the
apartment complex riser
In the apartment, it will therefore be
possible to create a video door entry
system with dedicated entrance
panels and cameras, integrated with
the other MY HOME systems
-
Video door entry and home video surveillance system MY HOME 393
Multimedia Touch Screen
MuLTIMEDIA TOuCH SCrEEN
10" Touch Screen display for the
management and the control of MY
HOME applications
It can be used to answer video door
entry system calls, and to display
images from the cameras connected
to the system It manages audio,
video, and WEB multimedia contents
through the USB connection It has
an SD card slot, and LAN connection
To be completed with the surround
plate
AuDIO/VIDEO NODE AND VIDEO
ADApTEr
They perform the function of audio/
video mixers, for the connection to
the system of entrance panels and
video handsets
The audio/video node can be used
to connect up to 4 entrance panels /
cameras and up to 4 risers
The video adapter on the other hand
can be used to connect 2 entrance
panels and 1 riser (or 1 entrance
panel and 2 risers)
during presetting, the inclusion of the
audio/video node is recommended,
to allow for future system expansions.MuLTICHANNEL MATrIX
It functions is that of an advanced
audio/video mixing device
It has 4 sound source inputs and 4
inputs for video door entry system/
cameras, which can be distributed
simultaneously
To be used in alternative to the
audio/video node, in MY HOME
systems with integrated video door
entry system and sound system
Audio/video node
Video adapter
Multichannel matrix
-
394 Video door entry and home video surveillance systemMY HOME
GENERAL FEATURES
Example 1 - Villa
Whice Video Station
Nighter Video Station
Audio/video node Power supply
Entrance panel
ONE-FAMILY VIDEO DOOr-ENTrY SYSTEM WITH INTErCOM BETWEEN VIDEO HANDSETS
-
BUS
BUS
BUS
BUS
BUS
BUS 2 1
BUS
S C S
O U T 1 O U T 2 O U T 3 O U T 4
I N 1 I N 2 I N 3 I N 4
O U T
I N
349321
349321
349320
349320
349320
N= = 5
P = M =
N= = 1
P = M =
N= = 4
P = M =
N= = 3
P = M =
oN
OFF
OFF
OFF
OFF
F441 346000
343001
N= = 2
P = M =
230 Vac
P= =
N = T = S = 9
S
Video door entry and home video surveillance system MY HOME 395
Item DescrIptIon QUAntIty
343001F441346000349320349321S
Entrance panelAudio/video nodePower supplyNighter Video Station Whice Video Station Electrical door lock
111321
LiViNg rooM
rooM 2
rEcEPTioN rooM
KiTcHEN
rooM 1
Max. 5 handsets Max. 200 metres between the entrance panel and the last handset
S = Electric door lock 18 V 4 A impulsive 250 mA holding current
NoTE 1: We recommend that the video handsets are configured using the software supplied with the productNoTE 2: When a call is received, only the handset configured with n=1 comes on
-
396 Video door entry and home video surveillance systemMY HOME
GENERAL FEATURES
Example 2 - Villa
Whice Video Station
Nighter Video Station
outdoor camera
Polyx Memory display
Audio/video node
ONE-FAMILY VIDEO DOOr-ENTrY SYSTEM WITH OuTDOOr CAMErAS
Entrance panel
Power supply
-
OFF
OFFBUS
BUS
BUS
BUS
BUS
BUS 2 1
BUS
S C S
O U T 1 O U T 2 O U T 3 O U T 4
I N 1 I N 2 I N 3 I N 4
O U T
I N
N= = 1
P = M =
N= = 2
P = M =
N= = 5
P = M =
N= = 4
P = M =
N= = 3
P = M =
ON
OFF
OFF
349321
349321
344163
349320
349320
F441 346000342991
391670 391670
P= =
N= =
T = S = 9
P= = 1
N = Z = M = A = PL =
P= = 2
N = Z = M = A = PL =
S
230 V
Video door entry and home video surveillance system MY HOME 397
Item DescrIptIon QUAntIty
342991391670F441346000349320349321344163S
Entrance panelOutdoor cameraAudio/video nodePower supplyVideo Station NighterWhice Video Station Polyx Memory DisplayElectrical door lock
12112211
Max. 5 handsets Max. 200 metres between the entrance panel and the last handset
S = Electric door lock 18 V 4 A impulsive 250 mA holding current
NoTE 1: We recommend that the video handsets are configured using the software supplied with the productNoTA 2: The answering machine function is available only using the 344163 video handset, and can only be activated on 1 video handset (the one configured with N=1)Nota 3: When a call is received, only the Handset configured with N=1 comes on
LiNViNg rooM
rooM 2
rEcEPTioN rooM
KiTcHEN
rooM 1
-
398 Video door entry and home video surveillance systemMY HOME
GENERAL FEATURES
Example 3 - Apartment
outdoor camera
Polyx Memory display
Audio/video node Power supply
indoor camera
Axolute Eteris Video display
Apartment interface
ApArTMENT WITH DEDICATED ENTrANCE pANEL AND prIVATE CAMErAS
-
BUS 2 1S C S
O U T 1 O U T 2 O U T 3 O U T 4
I N 1 I N 2 I N 3 I N 4
O U T
I N
BUS
BUS
ON
OUT
IN
ON OFF
BUS
BUS
BUS
BUS
C OK
OFF
ON
OFF
oN
OFF
N= = 5
P = 1M =
N= = 4
P = 1M =
N= = 3
P = 1M =
P= = 3
N = Z = M = A = PL =
N= = 1
P = 1M =
N= = 2
P = 1M =
N= = 5
M = 3
P= = 2
N = Z = M = A = PL =
P= = 1
N = T = S = 9
344163
349340
344163
344163
344163
346000F441
346850
342991
391661
391670
230 Vac
ON
S
Video door entry and home video surveillance system MY HOME 399
Item DescrIptIon QUAntIty
342991391670391661346000F441346850344163349340S
L2000 Entrance panel Outdoor cameraAxolute indoor cameraPower supplyAudio/video nodeApartment interfacePolyx memory displayEteris Video Display Electrical door lock
111111411
NoTE 1: We recommend that the video handsets are configured using the software supplied with the productNoTE 2: configure the entrance panels and the apartment cameras starting from (P=1)NoTE 3: The audio/video answering machine can only be activated on one 344163 video handset (the one configured with N=-1)
Max 5 video handsets, 1 apartment EP and 2 apartment cameras
BuiLdiNg riSEr
APArTMENT ExTENSioN
BuiLdiNg riSEr
-
400 Video door entry and home video surveillance systemMY HOME
GENERAL FEATURES
Example 4 - Complexes of small houses
MuLTI-FAMILY SYSTEM WITH SINGLE INDEpENDENT DWELLINGS AND AT LEAST ONE COMMON ACCESS pOINT
Apartment interface
Entrance panel
Audio/video node Power supply
-
BUS
ON
OUT
IN
ON OFF
BUS
S C S
BUS 2 1
ON
OUT
IN
ON OFF
ON
OUT
IN
ON OFF
BUS
ON
OUT
IN
ON OFF
BUS
BUS
SCS
TMP C NO/S+ SNCPL RC
F441 346000 346260
OFF
OFF
OFF
ON346850 346850
346850346850
349140
N= 3= 5
M = 3
N= 9= 9
M = 3
N= = 1
M = 3
N= 2= 6
M = 3
P= =
T = M =
JMPJMP
S
P= =
S =
max
50 m
230 Vac
Video door entry and home video surveillance system MY HOME 401
Item DescrIptIon QUAntIty
349140339213339313F441346000346850S346260
Axolute entrance panel Front cover plateFlush mounted boxAudio/video nodePower supplyApartment interfaceElectrical door lockDoor lock actuator
111111 - 9911
Max 99 apartment interfaces and 1 apartment complex entrance panel Max 50 metres between entrance panel and audio/video node
SMALL HouSE 35 SMALL HouSE 99
SMALL HouSE 1 SMALL HouSE 26
inside of the apartment see previous diagram
inside of the apartment see previous diagram
inside of the apartment see previous diagram
inside of the apartment see previous diagram
The EP must be configured and programmed using the software supplied with the product
-
402 Video door entry and home video surveillance systemMY HOME
GENERAL FEATURES
System functions
THE CALL
Pressing the call pushbutton on the
entrance panel, the system generates
a signal that is only recognised by the
video handsets the call is addressed
to (the call will have to be answered
within 30 seconds from the moment
the pushbutton is pressed)
Each VIDEO handset is configured in
a unique specific way When the call
is received, the video handset rings
and the monitor switches on
Press the pushbutton to
establish the communication
(maximum duration of the
communication is 1 minute) with the
entrance panel Press again to
stop the communication and switch
the monitor off
CONVErSATION SECrECY
During the conversation between
the entrance panel and the video
handsets, all external panels and
handsets that are not involved in
the conversation are temporarily
excluded in order to guarantee
the privacy of video door entry
conversations When calling from an
entrance panel that is temporarily
excluded, a time-out tone will be
heard, to indicate that the extension
line is momentarily busy
SIMuLTANEOuS SWITCHING ON
With video handsets, simultaneous
switching on of the monitor is also
possible: upon arrival of the call, all
handsets ring and the monitors of all
video handsets switch on When the
call is answered, only the monitor of
the video handset communicating with
the entrance panel will remain on
In order to set this function, all the
video handsets but one must be
powered locally using an additional
power supply, item 346020
Call
The handset rings and the monitor switches on
Communication
The conversation cannot be heard
Apartment 1 Apartment 2
Call
All the handsets, on the same call, ring and switch on the monitor.
-
CLAK
Video door entry and home video surveillance system MY HOME 403
DOOr LOCK puSHBuTTON
The video handsets are fitted with a
door lock pushbutton Pressing this
pushbutton will open of one of the
door locks of the system
With the system at rest, the pressure
of the pushbutton will cause the
opening of the door lock of the
entrance panel associated with the
handset during the P configuration of
the handset itself On the other hand,
if the pushbutton is pressed during
the call, the door lock associated to
the entrance panel making the call
will be opened
THE STAIrCASE LIGHT
FuNCTION
The video handsets are equipped
with an icons menu
This function activates a relay for the
timed switching on of lights and the
opening of the gate
The function can be performed by
installing the actuator item 346200,
appropriately configured
SELF-SWITCHING ON
puSHBuTTON
By pressing the self-switching on
pushbutton while the videohandset
is at rest, a connection will be
established with the entrance panel
associated with the handset during
the P configuration of the handset
itself
Pressing repeatedly on the self-
switching on pushbutton, will scroll
through the various entrance panels
and the cameras connected to the
system
Call
Pressing the door lock key will open the gate associated with the handset.
The staircase light function will switch on the system lights connected to a special actuator
Each time the self-switching on key is pressed the images displayed change.
-
2 2 2
404 Video door entry and home video surveillance systemMY HOME
GENERAL FEATURES
System functions
MASTEr-SLAVE FuNCTION
For multi-family installations the
MASTER-SLAVE function is available:
when the call is received, all the
apartment handsets ring, but only
the monitor of the video handset
configured as master comes on
When the auto-switching on key of
a SLAVE is pressed, the monitor of
the MASTER handset turns off, while
the monitor of the SLAVE itself turns
on (without necessarily establishing
communication with the entrance
panel) If the connection key
of a SLAVE is pressed, the MASTER
monitor turns off and communication
with the audio-video entrance panel
is established
Call
When a call is received, the MASTEr comes on, while the SLAVE will only ring.
Master Slave
INTErCOM
The system offers an intercom
function, with up to 3 minutes
communications between
videohandsets:
From di erent apartments Within the same apartment
If the apartment has an apartment
interface - item 346850 - or is
a one- family apartment, each
videohandset of the apartment can
be called individually The INTERCOM
connection can be established at
the same time as other external
connections The INTERCOM
connection can be simultaneous to
other connections external to the
apartment If the apartment does not
have an apartment interface - item
346850 - any apartment handset can
call all other apartment handsets
The INTERCOM connection will not
occur at the same time as external
connections Any call received by an
EP, even to any other apartment, will
terminate the INTERCOM connection
INTeRCOMcall
Apartment 1
Apartment 2
item 346850 apartment interface enables the iNTErcoM function between the devices within the one apartment and the various apartments
APArTMENT 2
APArTMENT 1
-
MESSAGGIO 1MESSAGGIO 2MESSAGGIO 3
MESSAGGIO 1MESSAGGIO 2MESSAGGIO 3
MESSAGGIO 1MESSAGGIO 2MESSAGGIO 3
MESSAGGIO 1MESSAGGIO 2MESSAGGIO 3
MESSAGGIO 1MESSAGGIO 2MESSAGGIO 3
Video door entry and home video surveillance system MY HOME 405
VIDEO DOOr ENTrY SYSTEM
ANSWErING MACHINE
FuNCTION
Function available only using the
POLYX MEMORY DISPLAY video
handset, item 344163 It is possible
to record voice and images of a call
from an entrance panel
It is also possible to record an audio
message to play back on the entrance
panel following an unanswered call
The video door entry system message
can be recorded in 2 ways:
STILLS: the message includes a picture of the visitor and the
recorded audio message (160
messages max)
VIDEOS: the message includes a video feed (duration 16 seconds)
and the recorded audio message
(18 messages max)
Each message will be given a
progressive number, which will be
displayed on the video handset,
together with the date and time
information
Playback of sounds and images recorded by the answering machine
Answering machine active
We are currently out.....
-
oN
406 Video door entry and home video surveillance systemMY HOME
GENERAL FEATURES
System functions
pAGEr FuNCTION IN SYSTEMS
INTEGrATED WITH SOuND
SYSTEM
By pressing the conversation
pushbutton on the video
handsets, it is possible to broadcast
a message through all the
loudspeakers of the sound system
The involved video handsets must be
powered locally
From the video handset menu it
is possible to control and display
the functions of the sound system
through the icons of the menu itself
NoTE: function possible by configuring the video
handsets using the software supplied with the
product.
dinner is served!
SCENArIO CONTrOL FuNCTION
IN SYSTEMS INTEGrATED WITH
AuTOMATION SYSTEM
From the video handsets, it is possible
to recall the scenarios saved in the
F420 scenarios
NoTE: function possible by configuring the video
handsets using the software supplied with the
product.
uP
SWITCHING ON CAMErA
FuNCTION IN SYSTEMS
INTEGrATED WITH THE
BurGLAr ALArM SYSTEM
It is possible to associate a zone of the
burglar alarm to the cameras When
an alarm situation is detected, the
images recorded by the camera are
displayed on the video handset
Using the appropriate icons of the
menu of the video handset, it is
possible to monitor the status of the
burglar-alarm system: for example,
the status of the burglar-alarm
(armed/disarmed), active zones,
alarms occurred
NoTE: function possible by configuring the video
handsets using the software supplied with the
product.
ir detector and associated cameras
-
20.5 C
22.5 (+2)18.5C
CUCINA
+
+
Aoff
20.5 C
22.5 (+2)18.5C
CUCINA
+
+
Aoff
Video door entry and home video surveillance system MY HOME 407
SupErVISION FuNCTION IN
SYSTEMS INTEGrATED WITH
THE TEMpErATurE CONTrOL
SYSTEM
From the video handset menu, it is
possible to display the status of the
temperature control system
Using the appropriate icons it is
possible, for example, to change the
temperature parameters, and display
the status of the probes
NoTE: function possible by configuring the video
handsets using the software supplied with the
product.
-
22
BUSPI
BUSTK
PS
BUSPI
BUSTK
PS
BUSPI
BUSTK
PS
BUSPI
BUSTK
PS
408 Video door entry and home video surveillance systemMY HOME
System composition
The system is classed as SELV (Safety
Extra Low Voltage) due to the fact
that it is powered by non grounded
safety double insulation independent
power supplies with a max voltage
of 25 Vac (effective) or 60Vdc non-
inverted voltage
In addition, all BTicino devices are
double insulated
BASIC ELEMENTS OF THE VIDEO
SYSTEM
In order to install a system it is
necessary to purchase, in addition to
the entrance panel and the handset,
also the 346830 video adapter, or
the F441 audio/video node, and the
346841 floor shunt with the function
of distributing the video signal
A maximum of 3 connections are allowed on the video adapter.
Handsets Entrance panel Handsets
connection of 2 entrance panels and a riser for the handsets
connection of 1 entrance panel and 2 risers for the handsets
(*) if either an interface is connected to the entrance panel, only one connection on the TK BuS terminal of the video adapter is possible.
(*) Entrance panels
VIDEO ADApTEr
The video adapter is used to connect
entrance panels and handsets to a 2
wire video system
A maximum of 3 connections are
allowed on the video adapter
Video entrance panel
Video adapter
Power supply
Video handset
VidEo AdAPTEr
Entrance panels
Handsets
Power supply 346000
The conformity to SELV classification
is only guaranteed only subject to
FULL COMPLIANCE with current
installation regulations and with the
GENERAL RULES FOR INSTALLATION
relating to each single device and
cable, making up the installation
GENERAL RULES FOR INSTALLATION
-
2SCS
SCS
ART. 346841
Video door entry and home video surveillance system MY HOME 409
Video entrance panel
Power supply
Power supply
Video handset
AuDIO/VIDEO NODE
Or VIDEO MATrIX
The F441 audio/video node and the
F441M video matrix must be used in
alternative to the video adapter when
more than 2 entrance panels must be
installed in the system, or when more
than 2 risers are needed
The use of the audio/video node
or the video matrix is however
recommended, to allow for future
mY HOme integrations, system
expansions, and/or addition of
cameras.
Allow for one output of the audio/
video node, or the video matrix, for
each video door entry system video
handset with table-top installation
Audio/VidEo NodE
To the entrance panels/cameras
To the handsets
FLOOr SHuNT
When creating video systems, the
use of the floor shunt, item 346841
is recommended This will provide
important savings on the cable to
be used This is particularly suitable
for multi-family systems, when more
than one living unit on the same floor
or in multi-family systems, where
max distance between the entrance
panel and all handsets is needed The
Floor shunt enables star connection
of up to 4 apartments with a max
of 3 handsets for Apartment (max
1 handset per output, if set in
simultaneous switching on)
One output of the audio/video node
should be dedicated to each table-
mounted video handset installed
FLoor SHuNT
Apartment 1
Apartment 2 Apartment 3
Apartment 4
2 wire riser
riser
For each output: max. 3 video handsets or bells in the same apartment max. 1 video handset in simultaneous switching on max. 1 table-mounted video handset
Audio/video node
-
2 22
22
2
ON
OUT
IN
ON OFF
SC SSC S
2
SC S
2
2
2
22
SC S
ON
OUT
IN
ON OFF
ON
OUT
IN
ON OFF
ON
OUT
IN
ON OFF
ON
OUT
IN
ON OFF
F441 346000 346851 F441 346000
346851 346851 346851 346851
F441
346000
F441
346000
410 Video door entry and home video surveillance systemMY HOME
GENERAL RULES FOR INSTALLATION
System composition
SYSTEM EXpANSION MODuLE
346851 IN MOD = 0
(SYSTEM EXpANSION MODE)
To be used for system expansion, in
order to:
Regenerate the video signal and have a further 200 m available after the
interface (using the 336904 cable)
Increase the number of devices connected to the BUS
Use a max of 3 modules, confi gured using the MOD = 0 in cascade
As far as the system composition,
distances and topology are
concerned, within the system 1
section, the system expansion
module item 346851 must be
considered as a handset On the
other side, within the system 2
section it should be considered as an
entrance panel
Mod = 0
Entrance panel
max. 1 item 346851 with Mod = 0 for each output
The iN clamp of the system expansion modules configured with Mod = 0 must be connected to a dedicated output of the F441 audio/video node or the 346841 floor shunt (as a handset with local power supply).
System 1 section System 2 section
Entrance panel
200 m 200 m
-
2SC S
22
2
2
SC S
22
2
ON
OUT
IN
ON OFF
ON
OUT
IN
ON OFF
SC S
346000F441 346000F441
346851 346851
346000F441
Video door entry and home video surveillance system MY HOME 411
Mod = 5
SYSTEM EXpANSION MODuLE
ITEM 346851 IN MOD = 5
(INDEpENDENT rISEr MODE)
This is used in buildings to have
risers with riser entrance panels
and independent audio and video
functions
The building entrance panel must be made with alphanumeric or numeric call module
Entrance panel
riser entrance panel
riser 1 riser 2
riser 1 system section (with independent audio) riser 2 system section (with independent audio)
riser entrance panel
common system section
in the common system section, for the purpose of system composition, distances and layout, the system expansion modules must be treated as a handsets. on the other hand, in the riser system sections they must be treated as entrance panels.
-
22
SC S
2 2
22
ON
OUT
IN
ON OFF
SC S
2
346850
346000
346000F441
F441
412 Video door entry and home video surveillance systemMY HOME
GENERAL RULES FOR INSTALLATION
System composition
ApArTMENT INTErFACE
ITEM 346850
This is used to have an apartment
system independent from the
building In this way, the apartment
system can have private cameras
and entrance panels and can be
integrated with all the MY HOME
applications
As far as the system composition,
distances and topology are
concerned, within the building
system, the interface item 346850
must be treated as a handset On
the other side, within the apartment
system, it should be treated as an
entrance panel configured with P = 0
Entrance panel
Apartment system section
Apartment camera
Apartment entrance panel
Apartment block system section
For the completion of the system, any type of cable
can be used (including existing cables). Maximum
performance and distances are achieved using the
336904 cable.
Handset
-
1 2 3 4 5
6 7 8 9 0SLA
I
3501K
1 2 3 4 5
6 7 8 9 0SLA
I
3501/1 3501/2 3501/3 3501/4 3501/5
3501/6 3501/7 3501/8 3501/9 3501/0 3501/SLA
0-9
P= =
S =
P= = 1
S =
N= = 1
P =
N= 2= 5
P = 1
Video door entry and home video surveillance system MY HOME 413
Configuration
To configure means to program the
system This occurs assigning an
identification and operational mode
number to the devices
This operation is made inserting
in the appropriate seats some
configurators (numbered from 0
to 9), using a clamp provided with
the power supply or contained in
the case of the configurators or
using the configuration software
(recommended)
A seat is left empty corresponds to
the configuration of a zero
In the system exist two different
numerations to identify respectively
the entrance panels (EP) and the
handsets
The numeration of the EP (0-96) is
generally identified by P, while the
address of the handsets (0-99) is
identified by N
On the EP, in addition to the P
address it is necessary to configure
also the N address relating to the
handset from which we would start
to call
On the handsets in addition to the N
address, it is necessary to configure
in P the EP associated to the same
handset, or the entrance panel
on which the door lock and auto-
switching ON controls work when the
handset is switched OFF
Example of configured system and its operation
door
lock
and a
uto-
switc
hing o
N co
ntro
ls in
paus
e fro
m ap
artm
ent 2
5
door
lock
and a
uto-
switc
hing o
N co
ntro
ls in
paus
e fro
m ap
artm
ent 1
call a
partm
ent
call a
partm
ent 2
5
Should occur the need to modify the configuration of a device, it is necessary, in addition to change the configurators, take off the power supply to the whole system, wait 1 minute, and then provide voltage again. For each device exist also particular configurations which will be detailed in the product technical sheet.
The configurators can be purchased in a case
or individually
Apartment 1 Apartment 25
-
F441
346851 346851 346851 346851
SCS
346851
346851
2
2
2
ON
346851
ON OFF
ON
346851
ON OFF
ON
346851
ON OFF
ON
346851
ON OFF
ON
346851
ON OFF
ON
346851
ON OFF
Mod = 0M = 2
Mod = 0M = 1
Mod = 0M = 1
Mod = 0M = 2
Mod = 0M = 3
Mod = 0M = 4
414 Video door entry and home video surveillance systemMY HOME
GENERAL RULES FOR INSTALLATION
Confi guration
SYSTEM EXpANSION MODuLE
ITEM 346851
The system expansion module can be
configured in 2 different ways:
(the addresses in M with MOD = 0
and MOD = 5 do not conflict with
each other)
MOD = 0 for system expansion
M = specific progressive number for interface
Entrance panel
Entrance panel
Video handset
Video handset
-
346850 346850
2
2
2
2
2
2
346851 346851 346851346851 3468512 22
ON
346850INT
EXT
ON OFF
ON
346850INT
EXT
ON OFF
ON
346851
ON OFF
ON
346851
ON OFF
ON
346851
ON OFF
Mod = 5M = 1
Mod = 5M = 2
Mod = 5M = 39
N = 7
N = 6
N = 5 N = 5
N = 5
N = 6
Video door entry and home video surveillance system MY HOME 415
ApArTMENT INTErFACE 346850
The apartment interface is configured
as a normal handset The interface
must be configured in a specific
unique way No other handset can
be configured in N using the same
address, in the same system or on the
same riser with independent audio
The factory device is configured with
M = 3
correct configuration Wrong configuration
SYSTEM
2 WirE BuS
SYSTEM
2 WirE BuS
MOD = 5 for independent audio risers
M = specific progressive number indicating the riser number
For the common entrance panel, the handsets have address M (riser number) x 100 + N (handset for the riser).
Es. Handset N = 20 of the riser 12 for the common EP = 12 x 100 + 20 = 1220
common entrance panel
iNdEPENdENT 2 WirE riSEr
iNdEPENdENT 2 WirE riSEr
iNdEPENdENT 2 WirE riSEr
-
ON
ON
ON
ON
ON
OFF
OFF
OFF
ON
ON
ON
ON
346841346841
416 Video door entry and home video surveillance systemMY HOME
GENERAL RULES FOR INSTALLATION
The wiring
SYSTEM WIrING
The systems can also be wired in 2
modes:
in-out wiring STAR wiring with floor shunt 346841 (recOmmeNded)
IN-OuT WIrING
IN-OUT wiring is connected directly
on the terminal of the appliances
which are connected to the system
Each riser must be terminated by
positioning the micro switch of the
last handset to ON
IN-OUT wiring is particularly
indicated for one and two-family
systems and for vertical or horizontal
multi-family systems (with the homes
in rows)
STAr WIrING
The star wiring is made connecting
the individual apartment to an
output of the floor distribution block
Item 346841
Each line must be terminated by
positioning the micro switch of the
last appliance to ON
STAR wiring is particularly suitable
for multi-family systems, when more
than one living unit on the same floor
or in multi-family systems, where
max distance between the entrance
panel and all handsets is needed
On each output of the shunt it will be
possible to connect up to 3 handsets
maximum
An output of the floor distribution
block must be dedicated to
each handset with simultaneous
switching on or table-top base
installation.
Apartment 1
STAr wiring
Apartment 2
Apartment 3
Apartment 4
iN-ouT wiring
2 WirE BuS
Apartment n
Apartment 2
Apartment 3
Apartment 4
Apartment 5
Apartment 6
Apartment 7
Apartment 8
Handsets BuS
2 WirE BuS
-
200 m
ONOFF OFF
ONOFF
346841
ON
OFF
ON
OFF
OFF
ON
ON
2 2 2
2 2
2
Video door entry and home video surveillance system MY HOME 417
COMBINED WIrING
Both wiring methods described
previously can be used together, for
the realization of more articulated
systems
The combined wiring (IN-OUT
and Star) allows to execute wiring
systems in order to satisfy the
greatest quantity of requests
Floor distribution blocks outputs
can be used to connect a single
device or to generate an apartment
line (on which max 3 devices can
be connected, without using the
apartment interface item 346850)
To the Bus handset can be connected
in IN-OUT floor distribution blocks or
handsets
The assignation of the handsets
to the apartments occurs through
configuration (for further information
see technical sheets for the individual
devices)
Video entrance panel
Apartment n
Apartment 3 Apartment 2
Apartment 1
Entrance panel BuS
Floor shunt
-
NO
ON
346850INT
EXT
ON OFF
ON
346851
ON OFF
ON
346850INT
EXT
ON OFF
ON
346851
ON OFF
ON
346850INT
EXT
ON OFF
ON
346851
ON OFF
418 Video door entry and home video surveillance systemMY HOME
GENERAL RULES FOR INSTALLATION
Installation of entrance panels, handsets and interfaces
HEIGHT OF THE HANDSET
When installing the handsets, including
standard or video handsets, it is
recommended that the devices are
positioned at a height of 160 165 cm
(top edge)
Note: recommended installation heights, unless
otherwise required by local regulations.
160
165 c
m
INTErFACES ITEM 346850 AND
346851
The interfaces item 346850
(apartment interface) and item
346851 (system expansion module)
cannot be installed in a manhole For
their installation, a sealed electric
cabin with DIN rail must be used (DIN
switchboard)
HEIGHT OF THE ENTrANCE
pANEL
When installing the Entrance
panel, it is recommended that the
pushbutton panel is installed at a
height of 160 165 cm (top edge)
The camera must not be installed in
front of light sources, or in places
where the subject being filmed is in
the shadow
If this condition cannot be respected,
the picture will not have much
contrast in the darker areas This
is because the brightness is self-
regulated on the lighter part of the
picture
To solve these problems change the
camera installation height, normally
160 165 cm, to a height of 180 cm
and direct the lens downwards to
improve the quality of the shots
In scarcely lit areas, the installation
of an additional light source is
recommended
160 165 cm
-
F441346000 346830
346850 346851
346850 346851
346000
SCS
BUSPI
BUSTK
PS
o
ON
346851
ON OFF
ON
346851
ON OFF
ON
346850INT
EXT
ON OFF
ON
346850INT
EXT
ON OFF
Mod = 0
Mod = 5
Mod = 0
Mod = 5
Video door entry and home video surveillance system MY HOME 419
System performance
The following information provides
general parameters on the maximum
distances that can be achieved, and
the features of the cables to be used
The type of system considered is a
single family system or system below
an apartment interface
Note: in systems with apartment interfaces only (in/out connection) the distance of
LiNE c to be taken into account is 200 m (with BTicino cable 336904)
(*) Max. variable distance.
mAXImUm DIstAnce LIne A entrAnce pAneL - FUrtHest HAnDset
Cable
secti
on m
m2
2 nor
mal
cable
s >
0.2 m
m2 o
r L46
69
3369
04
twist
ed te
lepho
ne
pair 0
.28 m
m2
one p
air of
the
mult
i-pair
data
cable
, ite
m C9
881U
/5E
5 HANDSETS in/out 50 m 200 m 140 m 140 m
5 one-fam HANDSETS/OUTDOOR EP 50 m 200 m 100 m 70 m
5 one-fam HANDSETS/EP with local power supply
50 m 200 m 140 m 170 m
mAXImUm DIstAnce LIne c poWer sUppLy FUrtHest HAnDsetCa
ble se
ction
mm
2
2 nor
mal
cable
s >
0.2 m
m2 o
r L46
69
3369
04
twist
ed te
lepho
ne
pair 0
.28 m
m2
one p
air of
the
mult
i-pair
data
cable
, ite
m C
9881
U/5E
5 HANDSETS in/out 50 m 110 m 70 m 50 m
5 HANDSETS (with shunts) 50 m 110 m 70 m 50 m
mAXImUm DIstAnce LIne B entrAnce pAneL poWer sUppLy
Cable
secti
on m
m2
2 nor
mal
cable
s >
0.2 m
m2 o
r L46
69
3369
04
twist
ed te
lepho
ne
pair 0
.28 m
m2
one p
air of
the
mult
i-pair
data
cable
, ite
m C
9881
U/5E
2 pushbuttons 50 m 200 m 115 m 90 m
OUTDOOR EP 20 m 50 m 30 m 20 m
Entrance panel with local power supply 50 m 200 m 140 m 120
mAXImUm DIstAnce LIne D entrAnce pAneL Door LocK
Cable
secti
on m
m2
0.28
BTici
no SC
S cab
le -
item
L466
9
BTici
no SC
S cab
le -
item
3369
04
1
S+ S- clamps 30 m 30 m 50 m 100 m
door lock
Entrance panel
Furthest video handset
WARNING: For installation solutions or types other than those shown,
the distances and the current absorptions can be calculated using the You
Diagram software (which can be downloaded free of charge from the
website www.professionisti.BTicino.it technical service software and
diagrams). Also refer to the specific technical documentation
(2 WIRe system Technical Guide).
LiNE B
*
LiNE d*
LiNE c
*
LiNE A
*
e
e
-
346850
2 2
2
2
346851
ON
346850INT
EXT
ON OFF
2 2
2
2
ON
346851
ON OFF
346851
ON
346851
ON OFF
420 Video door entry and home video surveillance systemMY HOME
GENERAL RULES FOR INSTALLATION
SYSTEM WITH ApArTMENT
INTErFACE AND SYSTEM
EXpANSION MODuLE
Up to 3 interfaces, items 346850
and 346851 may be installed in
cascade Cascade interfaces are
those crossed by an audio/video
connection (Entrance panel
HANDSET) or (HANDSET HANDSET,
e g INTERCOM) Only 2 of these
interfaces (selected by the user)
retransmit the signal for 200 metres
The maximum distance between
EP and the furthest handset is 600
metres Each LINE (EP INTERFACE),
(INTERFACE INTERFACE) and
(INTERFACE H) must be 200 metres
maximum (with BTicino cable
336904)
The IN end cap of the system
expansion module configured with
M=0 MUST be wired and considered
as a H with local power supply
It must also be connected to an
output of the Audio/video node
F441, or the Floor shunt 346841
System performance
max. 200 m
Video entrance panel
Audio/video connection between the entrance panel and the video handset (3 passages maximum) = oK
max. 200 m
max. 200 m
max 200 m
-
BUS 2 1SC S
OUT1 OUT 2 O UT3 OUT 4
IN1 IN2 IN3 IN4
OUT
IN
SC S
OUT1 OUT 2 O UT3 OUT 4
IN1 IN2 IN3 IN4
OUT
IN
SC S
OUT1 OUT 2 O UT3 OUT 4
IN1 IN2 IN3 IN4
OUT
IN
SC S
OUT1 OUT 2 O UT3 OUT 4
IN1 IN2 IN3 IN4
OUT
IN
SC S
OUT1 OUT 2 O UT3 OUT 4
IN1 IN2 IN3 IN4
OUT
IN
3499 3499 3499 3499
F441 F441 F441 F441
F441 346000
Video door entry and home video surveillance system MY HOME 421
CONNECTION OF 16 AuDIO /VIDEO ENTrANCE pANELS Or CAMErAS
Video door entry system/apartment interface risers
4 entrance panels or cameras 4 entrance panels or cameras 4 entrance panels or cameras 4 entrance panels or cameras
-
BUS
BUS
BUS
BUS
BUS
BUS 2 1SC S
OUT1 OUT 2 O UT3 OUT 4
IN1 IN2 IN3 IN4
OUT
IN
BUS PL S+ S-
PS
S1
NC NOC
L
21 4365 87
ON
OFF
OFF
N= = 3
P = M =
N= = 2
P = M =
N= = 1
P = M =
OFF
OFF
N= = 5
P = M =
N= = 4
P = M =
344163
344163
344163
343001
F441 346000
230 Vac
346200
AA
ee
BB
P= =
N= =
T = S = 9
9
dd
344163
344163
230 Vac
PE
cc
422 Video door entry and home video surveillance systemMY HOME
One-family system with 1 EP and 5 intercommunicating video handsets
Item DescrIptIon
343001344163346200346000F441LEPPSS1
Linea 2000 Metal EPPolyx Memory Display video handsetStaircase light actuator (optional)Power supplyAudio/video nodeStaircase lightEntrance panelDoor lock release pushbutton (optional)Electric door lock 18V 4A impulsive 250mA holding current
configure the handsets starting from N = 1 configure and insert the Jumpers with the system
SWiTcHEd oFF. Also every time the configuration is modified the power supply to the system must be switched off and on again, waiting about 1 minute. The intercom function is operating even with a lack of
entrance panel connection. We recommend that the video handsets are configured
using the software supplied with the product.
AA use of the actuator is necessary for the staircase light service or generic actuations.
BB For the Entrance Panel, all the pushbutton panels of the 2 wire range can be used
cc Move the micro switch of the last video or audio handset at the end of the line to the oN position
dd Fit a 9 configurator to be inserted in S on the speaker module for the general call; do not insert any configurator in N.
ee The audio video answering machine can only be used on 1 video handset (the one configured with N=1)
Electric distribution board or My Home Flatwall
dEVicE 3
dEVicE 2
dEVicE 1
dEVicE 5
dEVicE 4
WArNiNg
WIRING DIAGRAMS
Nota 3: When a call is received, only the Handset configured with N=1 comes on
-
BUS
BUS
BUS
BUS
BUS
BUS 2 1SC S
OUT1 OUT 2 O UT3 OUT 4
IN1 IN2 IN3 IN4
OUT
IN
BUS PL S+ S-
PS
S1
BUS
N= = 1
P = M =
ON
344163
N= = 1
P = M =
344163
cc
AA
cc
N= = 1
P = M =
N= = 2
P = M =
N= = 2
P = M =
N= = 2
P = M =
344163
344163
344163
344163
OFF
OFF
OFF
OFF
F441 346000
230 Vac
343002
P= =
N= = 1
T = S =
AA
ON
PE
Video door entry and home video surveillance system MY HOME 423
Two-family systems with 1 EP, 3 handsets per home and intercom between apartments
configure and insert the Jumpers with the system SWiTcHEd oFF. Also every time the configuration is modified the power supply to the system must be switched off and on again, waiting about 1 minute. it is possible to install a maximum of 3 video handsets for
apartment. We recommend that the video handsets are configured
using the software supplied with the product configure Master and Slave devices using the software
When a call is received, the MASTEr rings and switches on, while the SLAVE will only ring. if the call is answered from a SLAVE unit, the master unit switches off again, while the monitor of the SLAVE from where the call is answered comes on."
AA Move the micro switch at the back of the last video or audio handset at the end of the line to the oN position
BB For the Entrance Panel, all the pushbutton panels of the 2 wire range can be used.
cc The audio video answering machine can only be used on 1 video handset (the MASTEr video handset)
Item DescrIptIon
343002344163346000F441EPPSS1
Two-family Linea 2000 Metal entrance panelPolyx Memory Display video handsetPower supplyAudio/video nodeEntrance panel (main)Door lock release pushbutton (optional)Electric door lock 18V 4A impulsive 250mA holding current
Electric distribution board or My Home Flatwall
WArNiNg
MASTEr
HoME 2
HoME 1
MASTEr
SLAVE
SLAVE
SLAVE
SLAVE
-
BUS PL S+ S-
PS
S1
BUS 2 1SC S
OUT1 OUT 2 O UT3 OUT 4
IN1 IN2 IN3 IN4
OUT
IN
BUS
BUS
BUS PL S+ S-
PS1
S2
349321
349321
230 Vac
F441 346000
342991 342991
391670 391670
P= =
N= = 1
T = S = 9
9
BB
P= = 1
N= = 1
T = S = 99
BB
P= = 2
N = Z = M = A = PL =
P= = 3
N = Z = M = A = PL =
N= = 2
P = M =
N= = 1
P = M =
PE PE1AA AA
OFF
OFF
424 Video door entry and home video surveillance systemMY HOME
WIRING DIAGRAMS
One-family system with 2 EP and 2 outdoor cameras
Item DescrIptIon
342991349321391670346000F441PE-PE1PS-PS1S1-S2Cam.1-Cam.2
Linea 2000 Metal entrance panel Whice Axolute Video Station 2 wire outdoor cameraPower supplyAudio/video nodeEntrance panel Door lock release pushbutton (optional)Electric door lock 18V 4A impulsive 250mA holding current2 wire outdoor camera
WArNiNg
configure and insert the Jumpers with the system SWiTcHEd oFF. Also every time the configuration is modified the power supply to the system must be switched off and on again, waiting about 1 minute. We recommend that the video handsets are configured
using the software supplied with the product. End with the micro switch of the last line/riser handset in
the oN position.
A A For the Entrance Panel, all the pushbutton panels of the 2 wire range can be used.
B B Fit a 9 configurator to be inserted in S on the Entrance panel to make a general call.
BuS Pi (5 handsets max.)
Electric distribution board or My Home Flatwall
cam. 2
dEVicE 2
dEVicE 1
cam.1
Nota: When a call is received, only the Handset configured with N=1 comes on
-
SC S
OUT1 OUT 2 O UT3 OUT 4
IN1 IN2 IN3 IN4
OUT
IN
BUS
BUS
BUS
BUS
BUS
BUS 2 1
BUS PL S+ S-
PSS1
12
PRI
1- 2
346020PRI: 220 240 V~ 175 165 mA 47/63 HzSCS: 27 Vdc 600 mA
12
PRI
1- 2
346020PRI: 220 240 V~ 175 165 mA 47/63 HzSCS: 27 Vdc 600 mA
12
PRI
1- 2
346020PRI: 220 240 V~ 175 165 mA 47/63 HzSCS: 27 Vdc 600 mA
12
PRI
1- 2
346020PRI: 220 240 V~ 175 165 mA 47/63 HzSCS: 27 Vdc 600 mA
12
PRI
1- 2
346020PRI: 220 240 V~ 175 165 mA 47/63 HzSCS: 27 Vdc 600 mA
NC NOC
L
21 4365 87
ON
N= = 5
P = M =
346020344163
230 Vac
F441 346000
343001
PE
P= =
N= =
T = S = 9
9
dd
346200
BB
ON
N= = 4
P = M =
346020344163
ON
N= = 3
P = M =
346020344163
230 Vac
230 Vac
230 Vac
ON
N= = 2
P = M =
346020344163
230 Vac
OFF
N= = 1
P = M =
346020344163
230 Vac
230 Vac
Video door entry and home video surveillance system MY HOME 425
One-family system with 5 video handsetsin simultaneous switching on
Item DescrIptIon
343001
344163346000346020F441346200PSS1
Flush mounted Linea 2000 Metal entrance panelPolyx Memory Display video handsetSystem power supplyAdditional power supply Audio/video node Staircase light actuator (optional)Door lock release pushbutton panelElectrical door lock
configure the handsets starting from N = 1 configure and insert the Jumpers with the system
SWiTcHEd oFF. Also every time the configuration is modified the power supply to the system must be switched off and on again, waiting about 1 minute. We recommend that the video handsets are configured
using the software supplied with the product
use of the actuator is necessary for the staircase light service or generic actuations.
For the Entrance Panel, all the pushbutton panels of the 2 wire range can be used.
Move to oN the microswitch, on the Video handset or audio handset, which ends the line.
Fit a 9 configurator to be inserted in S on the speaker module for the general call; do not insert any configurator in N.
The audio video answering machine can only be used on 1 video handset item 344163
WArNiNg
-
OFF
BUS 2 1SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
BUS
SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
BUS PL S+ S-
PSS1
SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
dd BB
N= = 1
P = M =
349320
230 Vac
F441
F441 346000
3499
P= =
N= = 1
T = S = 9
342991
391670 391670
391670
P= = 1
N = Z = M = A = PL =
P= = 2
N = Z = M = A = PL =
P= = 3
N = Z = M = A = PL =
cc
PE
426 Video door entry and home video surveillance systemMY HOME
WIRING DIAGRAMS
One-family system with max 16 cameras or entrance panels
To other handsets / apartment interfaces
To other handsets / apartment interfaces
cam.1
Item DescrIptIon
3499349320F441346000342991391670EPPSS1Cam1-Cam3Cam4-Cam7
Line terminatorAxolute Video Station NighterAudio/video nodePower supplyLinea 2000 Metal EP2 wire outdoor cameraEntrance panelDoor lock release pushbutton (optional) Electrical door lockOutdoor cameraIndoor camera
dEVicE 1
cam.2
cam.3
-
BUS 2 1SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
BUS
SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
BUS PL S+ S-
PSS1
SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
SCS
OUT1 OUT2 OUT3 OUT4
IN1 IN2 IN3 IN4
OUT
IN
P= = 4
N = Z = M = A = PL =
P= = 5
N = Z = M = A = PL =
P= = 6
N = Z = M = A = PL =
P= oFF= 7
N = Z = M = A = PL =
F441 F441 F441
3499 3499
3499
PL = PL = PL = PL =
Video door entry and home video surveillance system MY HOME 427
cam. 4
To other entrance panels or other common cameras(configured with P= 8 P= 11)
To other entrance panels or other common cameras(configured with P= 12 P= 15)
When the nodes are used in cascade, the distances of the various lines are halved.
For the Entrance Panel, all the pushbutton panels of the 2 wire range can be used.
All the advanced video handsets of the 2 wire range may be installed.
only use one output for each node and allow for a terminator item 3499 to be connected to the ScS clamp
configure advanced handsets using a Pc and Software supplied.
By entering oFF in the first seats of the P configurators, the microphone of the 2 wire cameras is excluded (this function is only possible for cameras 0 to 9. The microphone cannot be excluded on the other cameras).
WArNiNg
cam. 5 cam. 6 cam. 7
coLoUr InDoor cAmerAs AVAILABLe In tHe FoLLoWInG FInIsHes:
391658391659391657391663391661391662
LIGHTLIGHT TECHLIVINGAXOLUTE - WHITEAXOLUTE TECHAXOLUTE - ANTHRACITE
General featuresGeneral rules for installationWiring diagrams