view the catalogue
TRANSCRIPT
TRICOMTower Accessories Catalogue
2015
Tower Accessories
1TRICOMTRICOM 1
Dear Customer,Whenever an existing or potential customer opens up a catalogue such as this, they expect that the products offered have been thoroughly tested and refined. At Robor Energy, we have been manufacturing and selling steel and related products for over 90 years – so we know that we deliver quality products that work, and work well. It is this history that gives us the credibility to stand behind this catalogue and provide you – the customer – with the confidence to order from Robor Energy.
Robor Energy is a leading South African steel supplier with an International presence. Robor has recently acquired Tricom Structures (Pty) Ltd and all it intellectual property and thus became part of the Robor Energy Division. The experienced personnel have been a successful part of the growing telecommunications and commercial fabrication industry for fourteen years. The growth of these industries have been reflected in the product portfolio and distinctive competencies in design and engineering, enabling Robor Energy to meet demands in a rapidly evolving and highly competitive environment. Products and services are offered throughout the entire life of the communication and transmission networks from conception to commissioning through to continual upgrade and maintenance.
We at Robor Energy and Tricom are proud of this catalogue, so please contact us for quality products and outstanding customer service.
Yours truly,
Indiran GoundenManaging Director: Robor Energy and Tricom Structures (Pty) Ltd
Tower Accessories
2TRICOMTRICOM 2
ImagIne a world wIthout steel. we Can’t...
Established in 1922, Robor is a world-class South African manufacturer and supplier of welded steel tube
and pipe. Robor also supplies and adds value to carbon steel coil, plate, sheet and structural profiles.
Robor is active in most industries, including Mining, Transport - rail and road, Construction, Engineering,
Agriculture, Energy, Telecommunication & Distribution, and Water and Automotive through the supply of
steel, cold formed steel profiles and associated value added products including galvanizing.
It Is ImpossIble to ImagIne a world wIthout steel
Steel is a resource that has played a significant role in enabling the development of the advanced, industrial
civilization; from the buildings we occupy to the vehicles we commute in to the pipelines that provide the
water we drink; steel is an integral part of our daily lives and Robor has been part of this exciting industry for
almost a hundred years.
a Culture of InnovatIon and servICe exCellenCe
Robor’s reputation and expertise have enabled the company to cement its place in local and global
markets. A top priority for Robor is product innovation and service enhancement. The company
boasts three state-of-the-art production facilities located on the East Rand of Johannesburg, as well
as comprehensive warehousing capabilities and outlets in Durban, Port Elizabeth and Cape Town. This
ensures the delivery of high-quality products with exceptionally short lead times.
broad-based blaCk eConomIC empowerment (bbbee)
Robor subscribes to the principle of equal opportunity and embraces diversity. In particular, Robor believes that BBBEE is central to the sustainable success of the company, as well as the prosperity of South Africa and its people. The company utilizes the services of a SANAS-accredited rating agency to verify its BBBEE ratings. Currently, over 30% of its shareholding is held by empowered companies and previously disadvantaged individuals.
Corporate soCIal Investment (CsI)
In terms of our other empowerment initiatives, we have a significant number of senior black managers throughout the group and a staff complement that reflects the country’s diverse demographic profile. Accelerated training and development of our young leaders helps us to create tomorrow’s leaders.
Tower Accessories
3TRICOMTRICOM 3
solutIons orIentated
Keeping ahead of the advances within these industries allows ROBOR ENERGY DIVISION to capitalize
on opportunities, improve performance levels and enhance our ability to innovate. By combining an
extensive product range, high levels of service, experience and knowledge, ROBOR ENERGY offers a
complete solution to your needs.
Since its acquisition, TRICOM have been manufacturing goods that have brought quality-engineered
designs to the telecommunication and distribution marketplace.
ROBOR ENERGY is unique in its ability to provide products and solutions on a global basis to satisfy
the communication network infrastructure needs of the cellular, distribution and transmission markets
throughout the world.
With decades of experience in communication infrastructure, ROBOR ENERGY provides innovative
products and solutions to support the highest standards of performance and reliability demanded by
international network operators, service operators, service providers, technology manufacturers and
integrators.
TRICOM and ROBOR ENERGY’s success has been based on company commitment to total quality
and customer satisfaction.
Tower Accessories
4TRICOM
3.1.1 GSM Brackets
3.1.2 MW Brackets
3.1.3 Antenna Ice Breakers
3.2.1 Lattice Tower Platforms
3.2.2 Monopole Platforms
3.3.1 Vertical Fall Arrest System
3.3.2 Vertical Fall Arrest Components
3.3.3 PPE
3.4.1 Inland Paint Supply
3.4.2 Coastal Paint Supply
3.5.1 DC NAV Lights
3.5.2 Solar NAV Lights
3.5.3 Cabling
3.6.1 Copper Earth Rods
3.6.2 Flat Copper Conductor
3.6.3 Copper Bar (including isolators)
3.6.4 Lightning Spike
3.6.5 Down Conductor
3.6.6 Copper Cables
3.6.7 Stainless Steel Strapping
3.6.8 Exothermic Weld Kits?
3.6.9 Earthing Kits?
3.7.1 Cable Gantries
3.7.2 Gantry Support Poles
3.7.3 Cable Ladders
3.8.1 HDG Grade 8.8 (Bolts)
3.8.2 HDG Grade 8.8 (Nuts)
3.8.3 HDG Grade 8.8 (Washers)
Tower Accessories
5TRICOM
3.1 ANTENNA BRACKETS
3.1.1 gsm braCkets
3.1.2 mw braCkets
description:
» 3000Mm long ø89mm pipe
» 2X ant-single-l or ant-crux-150l brackets depending
on the tower leg (crux or single
» M16mm x 250mm threaded rods
» U-bolts to connect pipe with brackets
description:
» 2000mm LONG Ø114mm PIPE
» 2x Ant-Single-L or Ant-Crux-150L BRACKETS
DEPENDING ON THE TOWER LEG (CRUX OR
SINGLE)
» M16mm x 250mm THREADED RODS
» U-BOLTS TO CONNECT PIPE WITH BRACKETS
GSM ANTENNA BRACKET SYSTEM
MICROWAVE ANTENNA BRACKET SYSTEM
product code
product code
3.1 Antenna Brackets
Tower Accessories
6TRICOM
3.1.3 antenna ICe breakers
description:
» Ice breakers are made to protect the antennae and
microwave dishes from snow and ice.
» Ice breakers are installed on top of the pipe where
the antennae or microwave dishes are mounted on
» Ice breakers are installed on high altitude sites or on
sites where snow and ice is common
1.5 m Ice breaker
2 m Ice breaker
3 m Ice breaker
1.5M ICE BREAKER / 2M ICE BREAKER / 3M ICE BREAKER
product code
3.1 Antenna Brackets
Tower Accessories
7TRICOM
3.2 TOWER PLATFORMS
3.2.1 lattICe tower platforms
description:
» Irrespective of Traditional Resting and full Platforms,
various tower specific special platforms are
manufactured that can be installed on towers that are
already in use,
» In addition the requirement for resting platform
cages for safety purposes on higher towers or
towers with high wind or exposure conditions can be
manufactured,
TOWER PLATFORMS
product codes
3.2 Tower Platfoms
Tower Accessories
8TRICOM
description:
FallProtec Securope vertical systems to be installed on ladders or
tower structures.
The energy absorber can be installed on the cable or the ZIP glider
with an absorber can be used.
The product will consist of the following items:
» 6 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 50m x Stainless Steel cable
» 1 x Crimped end stop
» 6 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately.
FALLPROTEC SECuROPE VERTICAL 50M
FPSRoVert50m
description:
FallProtec Securope vertical systems to be installed on ladders or
tower structures.
The energy absorber can be installed on the cable or the ZIP glider
with an absorber can be used.
The product will consist of the following items:
» 6 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 55m x Stainless Steel cable
» 1 x Crimped end stop
» 6 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately.
FALLPROTEC SECuROPE VERTICAL 55M
FPSRoVert55m
3.3 TOWER SAFETY EQuIPMENT
3.3.1 vertICal fall arrest system
3.3 Tower Safety Equipment
Tower Accessories
9TRICOM
description:
FallProtec Securope vertical systems to be installed on
ladders or tower structures.
The energy absorber can be installed on the cable or the
ZIP glider with an absorber can be used.
The product will consist of the following items:
» 6 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 60m x Stainless Steel cable
» 1 x Crimped end stop
» 6 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately.
FALLPROTEC SECuROPE VERTICAL 60M
FPSRoVert60m
description:
FallProtec Securope vertical systems to be installed on
ladders or tower structures.
The energy absorber can be installed on the cable or the
ZIP glider with an absorber can be used.
The product will consist of the following items:
» 7 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 65m x Stainless Steel cable
» 1 x Crimped end stop
» 7 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately.
FALLPROTEC SECuROPE VERTICAL 65M
FPSRoVert65m
FALLPROTEC SECuROPE VERTICAL 70M
FPSRoVert70m
description:
FallProtec Securope vertical systems to be installed on
ladders or tower structures.
The energy absorber can be installed on the cable or the
ZIP glider with an absorber can be used.
The product will consist of the following items:
» 7 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 70m x Stainless Steel cable
» 1 x Crimped end stop
» 7 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately
FALLPROTEC SECuROPE VERTICAL 75M
FPSRoVert75m
description:
FallProtec Securope vertical systems to be installed on
ladders or tower structures.
The energy absorber can be installed on the cable or the
ZIP glider with an absorber can be used.
The product will consist of the following items:
» 8 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 75m x Stainless Steel cable
» 1 x Crimped end stop
» 8 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately.
3.3 Tower Safety Equipment
Tower Accessories
10TRICOM
description:
FallProtec Securope vertical systems to be installed on
ladders or tower structures.
The energy absorber can be installed on the cable or the
ZIP glider with an absorber can be used.
The product will consist of the following items:
» 8 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 80m x Stainless Steel cable
» 1 x Crimped end stop
» 8 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately.
FALLPROTEC SECuROPE VERTICAL 80MFPSRoVert80m
description:
FallProtec Securope vertical systems to be installed on
ladders or tower structures.
The energy absorber can be installed on the cable or the
ZIP glider with an absorber can be used.
The product will consist of the following items:
» 9 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 85m x Stainless Steel cable
» 1 x Crimped end stop
» 9 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately.
FALLPROTEC SECuROPE VERTICAL 85M
FPSRoVert85m
FALLPROTEC SECuROPE VERTICAL 90M
FPSRoVert90m
description:
FallProtec Securope vertical systems to be installed on
ladders or tower structures.
The energy absorber can be installed on the cable or the
ZIP glider with an absorber can be used.
The product will consist of the following items:
» 9 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 90m x Stainless Steel cable
» 1 x Crimped end stop
» 9 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately.
FALLPROTEC SECuROPE VERTICAL 95M
FPSRoVert95m
description:
FallProtec Securope vertical systems to be installed on
ladders or tower structures.
The energy absorber can be installed on the cable or the
ZIP glider with an absorber can be used.
The product will consist of the following items:
» 9 x Evo anchors
» 1 x 100mm crimp
» 1 x Turnbuckle
» 95m x Stainless Steel cable
» 1 x Crimped end stop
» 9 x Beam clamp sets
» 1 x Warning board
ZIP glider to be supplied separately.
3.3 Tower Safety Equipment
Tower Accessories
11TRICOM
description:
» For vertical Securope without absorber mounted on the line
» 1 glider per person
ZIP - VERTICAL FALL ARREST WITh ABSORBER
R01NSV009
description:
» Cable Ø 8mm construction 7 x 7 SS316
description:
» Can be used as top anchor in combination with fall arrest
R01NSV009
» Can be used as lower anchor in combination with turnbuckle
R01LDV038
» Can be used as intermediate anchor
STAINLESS STEEL CABLE
NEO ANChOR FOR VERTICAL SECuROPE
R01LDV006
R01NSV014
3.3.2 vertICal fall arrest system Components
3.3 Tower Safety Equipment
Tower Accessories
12TRICOM
description:
» Can be used as top anchor in combination with fall arrest
NSV009
» Can be used as lower anchor in combination with turnbuckle
R01LDV038
» Can be used as intermediate anchor
EVO ANChOR FOR VERTICAL SECuROPE
R01NSV016
description:
» 2 per horizontal life line
» 1 per Vertical / Inclined life line
description:
» 1 per life line to be crimped on end or top anchor
END OR TOP ANChOR
CRIMPING RING LENGTh 100MM
R01LDV002
R01LDV008
3.3 Tower Safety Equipment
Tower Accessories
13TRICOM
description:
» 1 per horizontal life line if line make a closed loop
» 1 per vertical life line at the bottom of the line
TuRNBuCKLE FOR IN LINE TENSIONING
R01LDV038
description:
» This stop can be opened for easier maintenance on the fall
arrester.
description:
» 2 or more if intermediate anchors are installed
CRIMPED END STOP
CLAMPS TO FIx ANChOR ON LADDER uPRIGhT, GALVANIZED STEEL
R01NSV015
R01NSV006
3.3 Tower Safety Equipment
Tower Accessories
14TRICOM
3.3.3 ppe
a complete fall arrest kit consisting of the following:
» Scavenger Jacket WP Full-Body Harness
- D-Ring rear & front attachment points (Fall Arrest)
- Adjustable buckle system with speedclips.
» Scavenger 1m Fold Back Shock Absorber with S-Strap
- Double Webbing Lanyard 1m with steel scaffold hooks
- Scaffold hooks stitched in and a snaphook on the other end to
connect to the harness
» Scavenger Work Positioning Lanyard
- 2m Adjustable work positioning lanyard, with double action snap
hooks for easy attachment to harness.
» Rock Helmet K2
- Quick-release buckle system, ventilation with 6 vents
» Scavenger PVC Throw Bag 30m
- PVC Canvas - Waterproof material, Grab loop for carrying.
» Scavenger Open Round Sling (60cm) x2
» Scavenger Open Round Sling (120cm)
description:
» Highly visible comfortable Fall Arrest harness with padded work
positioning belt and reflective strip on back of vest.
STANDARD FALL ARREST KIT
GTFASKIT001
SCAVENGER JACKET WP hARNESS
S01JACKWPhA#S-L
3.3 Tower Safety Equipment
Tower Accessories
15TRICOM
description:
» Double Webbing Lanyard 1m with steel scaffold hooks stitched
in and a snaphook on the other end to connect the shock
absorber to the harness.
description:
» 2m Adjustable work positioning lanyard with protective PVC
cover and stitched in connectors to connect to the harness.
SCAVENGER D-ABSORBER 1MFB WITh S-STRAP
S01SA1MFBWSSTRA
SCAVENGER WORK POSITIONING LANYARD S10
S01WORKPOSLANY
description:
» Quality comfortable helmet, is strong, well ventilated and
provided with roller for size adjustment control.
ROCK hELMET K2
R01K2hELMET
3.3 Tower Safety Equipment
Tower Accessories
16TRICOM
description:
» Throw bag made from PVC Canvas - Waterproof material with
Grab loops for easy carrying.
SCAVENGER PVC ThROW BAG 30M B5
S01BAGThROW
description:
» 25 mm heavy duty tubular webbing, Length 60 cm. Used for
work positioning, lifting and anchoring.
description:
» 25 mm heavy duty tubular webbing, Length 120 cm. Used for
work positioning, lifting and anchoring.
SCAVENGER 60CM OPEN ROuND SLING S13
S01SLING60CM
SCAVENGER 120CM OPEN ROuND SLING S14
S01SLING120CM
3.3 Tower Safety Equipment
Tower Accessories
17TRICOM
description:
» Complete Rescue kit with 50m rope where one lifts the casualty
by means of a ratchet system and can safely lower the casualty
to the ground.
description:
» Complete Rescue kit with 50m rope where one lifts the casualty
by means of a ratchet system and can safely lower the casualty
to the ground.
50m ratChet resCue kIt
RR50LORY
100m ratChet resCue kIt
RR100LORY
Fall Arrest Rope Access Arial Rigging Gear Inspection & Fall Protection Plan Development Courses Fall Protection Plan In-house Designer Equipment Suppliers Rope Access & Bolting Services
P.O. Box 2298 Tel: 086 110 1213 Reg. No: 2001/014469/23 Faerie Glen Intern Tel.: +27 12 349 1318 VAT No: 4330 1944 75 Pretoria Fax: 086 459 7501 0043 E-mail: [email protected] Web: www.gravitytraining.co.za _____________________________________________________________________________________________
_______________________________________________________________________Page 1 of 1 Members: GD Forster and AF Nel
B-BBEE Level 3 contributor (110%) and Value adding supplier (125%)
Seta registration no: 2290
RATCHET RESCUE KIT WITH ANTHRON LORY DESCENDER:
3.3 Tower Safety Equipment
Tower Accessories
18TRICOM
recommended Inland paint solution
» Galv Prep Etcher – Techno Coatings Gamma Galvanising
Etcher will properly condition Galvanised material for
direct painting, it is an acid based soap with build in
inhibitors,
» Techno Prime MSDS – Techno Coatings, galvanise primer
is a high-performance, superior quality water based
primer formulated to promote adhesion and prevent rust
formation when used on galvanised steel for interior and
exterior use. It contains fungicides to eliminate fungal
growth,
» Techno Sheen MSDS – Techno Coatings, high sheen
non-drip acrylic, is a high-performance, non-drip superior
quality pure acrylic emulsion formulated to provide a long
lasting, extremely durable finish which is stain resistant. It
contains fungicides to eliminate fungal growth.
recommended Coastal paint solution
» Sigma Prime 200 – Universal Epoxy Anticorrosive Primer,
based on pure epoxy technology, Film thickness 100μm
(microns), 2.5 hours between coats to dry,
» Sigma Cover 410 – Two Component, High Solids, High
Build, Polyamide Cured Epoxy Coating, Film thickness
120μm (microns), 10 hours between coats to dry,
» Sigma Dur 550 – Two Component, Aliphatic Acrylic
Polyurethane Finish, Film thickness 50μm (microns), 6
hours between coats to dry,
3.4.2 Coastal paInt supply
3.4 Tower Painting
3.4 TOWER PAINTING
3.4.1 Inland paInt supply
Tower Accessories
19TRICOM
3.5 Navigation Lights
low Intensity, type a and type b navigation lights
type lamp holder lIght IntensIty voltage lamp used
B E27 >32cd
230V AC
48V DC
24V DC
12V DC
LED
A E27 >10cd 230V AC 20W CFL
A 2 Pin PL > 10cd 230V AC 13W 2 Pin PL
A 4 Pin PL > 10cd
48V DC
24V DC
12V DC
13W 4 Pin PL
light fittings with Control gear
dC
Input voltage 230v 12v 24v 48v
lamp:
Lampholder 2 pin pl 4 pin pl 4 pin pl 4 pin pl
Lamp (Compact Fluorescent) 13w 13w 13w 13w
electronic gear:
Working Voltage 230v+/-5% 10v-14v 20v-28v 40v-55v
Input Current (Average) +/-175mA +/-1200mA +/-600mA +/-300mA
Operating Frequency 50KHz +/-30KHz +/-30KHz +/-30KHz
Encapsulated Yes Yes Yes Yes
Soft Start Yes Yes Yes
Trip Out for Faulty Lamp Yes Yes Yes
Trip Out for High Voltage No No No No
3.5 NAVIGATION LIGhTS
3.5.1 dC nav lIghts
Tower Accessories
20TRICOM
3.5.1 low IntensIty, type a and type b navIgatIon lIghts
The Type A and Type B low intensity obstruction lights comply with the recommendations of the International Civil Aviation
Organisation (ICAO) and are approved by the South African Civil Aviation Authority (SACAA).
3.5.1.1 AVIATION OBSTRuCTION LIGhTS:
description:
» LED Single Obstruction light
» Effective intensity>10cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
description:
» LED Single Obstruction light
» Effective intensity>32.5cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
description:
» LED Single Obstruction light
» Effective intensity>10cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
» “service+standby” or “service+service”optional
LOW INTENSITY ICAO TYPE A
LOW INTENSITY ICAO TYPE B - FAA L810
LOW INTENSITY ICAO TYPE A
DL10S
DL32S
DL10D
3.5 Navigation Lights
Tower Accessories
21TRICOM
description:
» LED Double Obstruction light
» Effective intensity>32.5cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
» “service+standby” or “service+service”optional
description:
» LED Double Obstruction light
» Effective intensity>50cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
» “service+standby” or “service+service”optional
description:
» LED Single Obstruction light
» Effective intensity>100cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
description:
» LED Single Obstruction light
» Effective intensity>50cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
LOW INTENSITY ICAO TYPE B FAAL810
LOW INTENSITY ICAO TYPE B
LOW INTENSITY ICAO TYPE B FAA L810
LOW INTENSITY ICAO TYPE B
DL32D
DL50D
DL100S
DL50S
3.5 Navigation Lights
Tower Accessories
22TRICOM
description:
» LED Double Obstruction light
» Effective intensity>100cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
» “service+standby” or “service+service”optional
description:
» LED Double Obstruction light
» Effective intensity>200cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
» “service+standby” or “service+service”optional
description:
» LED Single Obstruction light
» Effective intensity>200cd
» Operating Voltage: 12/24/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
LOW INTENSITY ICAO TYPE B FAAL810
LOW INTENSITY ICAO TYPE B
LOW INTENSITY ICAO TYPE B
DL100D
DL200D
DL200S
3.5 Navigation Lights
Tower Accessories
23TRICOM
description:
» LED Double Obstruction light
» Effective intensity>2000cd
» Operating Voltage: 24V/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
» “service+standby” or “service+service”optional
description:
» LED Double Obstruction light
» Effective intensity>2000cd
» Operating Voltage: 24V/48VDC;85-265VAC
» Steady or flashing mode Pre-programmed
» Built-in Photosensor /Alarm relay optional
» “service+standby” or “service+service”optional
MEDIuM INTENSITY AVIATION OBSTRuCTION LIGhT
MEDIuM INTENSITY AVIATION OBSTRuCTION LIGhT
ZG2K
ZG2K
3.5 Navigation Lights
Tower Accessories
24TRICOM
Features:
• Ultra-light LEDs, energy saving. • Self-contained without outside
power supply. • Maximum visibility distance 4km. • Once fully charged, it can work for
up to 200 hours. • Auto-off after being packed for 18
hours.
3.5.2 solar navIgatIon lIghts
3.5.2.1 SOLAR POWERED AVIATION OBSTRuCTION LIGhTS
The solar panel comes with PL10 provides power supply to the light, which makes PL10 a self-contained and care-free light unit.
description: » Ultra-light LEDs, energy saving. » Self-contained without outside power supply. » Maximum visibility distance 4km. » Once fully charged, it can work for up to 200 hours. » Auto-off after being packed for 18 hours.
Compliant
ICAO Annex 14, Volume 1, 4th Edition, July 2004
FAA Advisory Circular AC150/5370-2F
Product Specifications:
seriesvertical tower leg diameter range
horizontal tower leg diameter range
AMP3080 30-80mm 30-80mm
AMP30150 30-150mm 30-80mm
SOLAR POWERED AVIATION OBSTRuCTION LIGhT
PL10
battery: 3.6v/8ahsolar: 1.8wdescription:
» LED Double Obstruction light » Effective intensity>2000cd » Operating Voltage: 24V/48VDC;85-265VAC » Steady or flashing mode Pre-programmed » Built-in Photosensor /Alarm relay optional » “service+standby” or “service+service”optional
SOLAR POWERED LED OBSTRuCTION LIGhT
TY10S
3.5 Navigation Lights
Tower Accessories
25TRICOM
battery: 2*3.6v/8ah
solar: 2*1.8w
description:
» Flashing >10cd,
» Red, green, white, yellow, blue available
» LED solar powered obstruction light
battery: 3.6v/8ah
solar:1.8w
description:
» Flashing >10cd
» With Group synchronization &Alarm rely
» With wireless synchronization
battery: 3.6v/8ah
solar: 4.8w
description:
» Flashing >32.5cd
» Red, green, white, yellow, blue available
» External on/off switch, auto/manual switch
battery: 2*3.6v/8ah
solar: 2*4.8w
description:
» Flashing >32.5cd,
» Red, green, white, yellow, blue available
» LED solar powered obstruction light
DOuBLE SOLAR POWERED LED OBSTRuCTION LIGhT
SOLAR POWERED LED OBSTRuCTION LIGhT
SOLAR POWERED LED OBSTRuCTION LIGhT
DOuBLE SOLAR POWERED LED OBSTRuCTION LIGhT
TY10D
TY10SA
TY32S
TY32D
3.5 Navigation Lights
Tower Accessories
26TRICOM
battery: 12v/8ah
solar: 5w
description:
» >10cd, steady or flashing pre-programmed
» Red, green, white, yellow, blue available
battery: 12v/8ah
solar: 4*3w
description:
» Flashing >32.5cd
» Red, green, white, yellow, blue available
battery: 12v/16ah
solar: 4*5w
description:
» Flashing>50cd, steady >10cd
» Red, green, white, yellow, blue available
SOLAR POWERED LED OBSTRuCTION LIGhT
SOLAR POWERED LED OBSTRuCTION LIGhT
SOLAR POWERED LED OBSTRuCTION LIGhT
TY10V
TYI32
TYI50
3.5 Navigation Lights
Tower Accessories
27TRICOM
description:
» Input&output voltage, 24/48VDC;85-265VAC
» With photocell, alarm relay/for 2 lights
description:
» Input&output voltage, 24/48VDC;85-265VAC
» With photocell, alarm relay/for 2 lights
description:
» Input&output voltage, 24/48VDC;85-265VAC
» With surge protection, photocell, alarm relay, for 4 lights
description:
» Input voltage: 220VAC/48VDC
» Output voltage: 48VDC
» With surge protection, photocell, alarm relay
description:
» Input voltage: 220VAC
» Output voltage: 48VDC
» With surge protection, photocell, alarm relay
» 20hrs backup battery for 1 CL32D “service+standby”
INDOOR CONTROL PANEL
OuTDOOR CONTROL PANEL
OuTDOOR CONTROL BOx IP65
OuTDOOR CONTROL PANEL IP67
OuTDOOR CONTROL BOx IP65
CBL02
CBL02A
CBL04-AD
CBL04A
CBL04-B
3.5.3 Control panel for avIatIon obstruCtIon lIght
3.5 Navigation Lights
Tower Accessories
28TRICOM
description:
» SUS 304, containing extension mounting plate, pair of U-bolts,
3/4’’ connector, cable gland, fasteners
» For Lansing low intensity obstruction light
description:
» SUS 304, containing extension mounting plate, pair of U-bolts,
fasteners
» For Lansing DL200, ZG2K, TY10 series, TYIS32
description:
» SUS 304, containing extension mounting plate, pair of U-bolts,
fasteners
» For Lansing TY10D
MOuNTING BRACKETS (30-80MM ANGuLAR/TuBuLAR)MOuNTING BRACKETS (55-100MM ANGuLAR/TuBuLAR)MOuNTING BRACKETS (85-150MM ANGuLAR/TuBuLAR)
MOuNTING BRACKETS (30-80MM ANGuLAR/TuBuLAR)MOuNTING BRACKETS (55-100MM ANGuLAR/TuBuLAR)MOuNTING BRACKETS (85-150MM ANGuLAR/TuBuLAR)
MOuNTING BRACKETS (30-80MM ANGuLAR/TuBuLAR)MOuNTING BRACKETS (55-100MM ANGuLAR/TuBuLAR)MOuNTING BRACKETS (85-150MM ANGuLAR/TuBuLAR)
MBL 80 / 100 / 150
MBP 80 / 100 / 150
MBP-D- 80 / 100 / 150
3.5.3 navIgatIon lIght aCCessorIes
3.5 Navigation Lights
Tower Accessories
29TRICOM
description:
» For 2 lights
» For 3 lights
» For 4 lights
» For 5 lights
product name Code description
ELECTRICAL CABLE(TYPICAL SIZE)
Dx2C-0.75 » 2*0.75mm2(2-core)
Dx2C-1.5 » 2*1.5mm2(2-core)
Dx3C-1.5 » 3*1.5mm2(2core+1 earth)
Dx3C-2.5 » 3*2.5mm2(2core+1earth)
ShIELDED CABLE(TYPICAL SIZE)
Dx2C-1 » 2*1mm2 shielded
Dx2C-0.75 » 2*0.75mm2(2-core)
Dx3C-1 » 3*1mm2 shielded
Dx4C-1 » 4*1mm2 shielded
description:
» 1: HELLERMANN TYTON T120R 390*7.6mm, black Nylon
» 2: SUS304, 360*7.9mm
JuNCTION BOx (OuTDOOR TYPE)
CABLE TIE
JB02 / JB03 / JB04 / JB05
CT01 / CT02
3.5.3 navIgatIon lIght aCCessorIes
3.5 Navigation Lights
Tower Accessories
30TRICOM
armoured Cable (per meter)
Code sIZe (mm²) amps
W711 16 x 3 Core 83
» Rated Voltage: 600/1000V
» Temperature: Max 70°C
» For all applications, compensate for volt-drop in accordance with
SABS0142
» Note: Also available in other sizes
Cabtyre (100 roll)
Code sIZe (mm²) amps
W216 BK 1.5 x 3 Core 16
» Rated Voltage: SABS 300/500V
» For all applications, compensate for volt-drop in accordance with
SABS0142
» Note: Also available in other sizes
CABLING
W711 / W216
3.5.4 CablIng
3.5 Navigation Lights
Tower Accessories
31TRICOM
3.6 TOWER EARThING
AS PER CLIENT REQuIREMENTS AND SPECIFICATION:
M16 STRICKER CAP
M16 ThREADED COuPLING
M16 uNThREADED COuPLING
Flat Conductor Conductor Size mm
Cross Sectional Area mm2
Standard Coil Length Meters
Copper Coil Weight Kg
Aluminium Coil Weight Kg
20 x 2.5 50 50-100 22-44 7-14 20 x 3 60 50-100 26-52 8-16 25 x 3 70 50-100 34-68 9.5-19
3.6 Tower Earthing
Tower Accessories
32TRICOM
COPPER EARTh ROD
» M16 x 1200 SABS
» M16 x 1500 SABS
» M16 x 1800 SABS
M16 DRILL TIP
ExOThERMIC WELD TOOLKIT
3.6 Tower Earthing
Tower Accessories
33TRICOM
NON-INSuLATED RING LuG (PER 10)
Code desCrIptIon
RL70x10 70mm² x 10mm Non-Insulated Ring Lug
RL70x12 70mm² x 12mm Non-Insulated Ring Lug
wIrIng aCCessorIes
description:
» M16 to 25 x 3mm Flat Copper Clamp
description: » Brass U clamp for M16 earth Rod.
description:
» Brass Fasteners, Brass Bolts, Brass Nuts, Cold Forged Brass
Fasteners, Machine Screws ISO 4107, DIN 933,
DIN 934 Hex nuts.
COPPER CLAMP
COPPER CLAMP
BRASS FASTNERS/BOLTS/NuTS
TBA
TBA
TBA
3.6 Tower Earthing
Tower Accessories
34TRICOM
EARTh RODS250 mICron Code
desCrIptIon
ER1216 1.2m x M16 Earth Rod
ER1516 1.2m x M16 Earth Rod
ER1816 1.2m x M16 Earth Rod
» Copper Plated Steel
» SABS 1063/85 with copper electroplated to 250 Microns
ACCESSORIESCode desCrIptIon
ERA01 Driving Cap Case Hardened Steel
ERA02 Driving Tip Case Hardened Steel
ERA03 Coupling Brass
ERA04 70mm Clamp Brass
» Connectable Wire Size: 1 x Ø 8-10mm
» Fast and Easy to apply
LIGhTNING PROTECTION
description:
» Junction Bar with lightning rod Ø 14mm (Copper and stainless
steel screws)
» Connectable Wire Size: 1 x Ø 8-10mm
» Fast and Easy to apply
hIGh RISE LIGhTING PROTECTION
A-3016R
3.6 Tower Earthing
Tower Accessories
35TRICOM
FLAT COPPER 25x 3
DISTRIBuTION BOARD
» The following designs are available but are not limited to:
» Low voltage three and single phase distribution boards that
supply power to all needed equipment on site.Provisions are
made for metering if required and to connect alternative power.
» Boards are designed to have adequate grading between class
1 and class 2 surge protection when installed in the same
enclosure.
» Power monitoring equipment can also be provided.
» DC distribution boards to provide power to equipment requiring
48VDC.
» • Generator connection boxes.
3.6 Tower Earthing
Tower Accessories
36TRICOM
3.7 Telecommunication Cable Gantries
3.7.1 Cable gantrIes
Tricom Structures supplies high quality, multi-directional cable support systems. Our cabling systems are designed to be
easily upgraded and constructed while keeping the client’s specifications in mind. We offer the following range:
description
» Available in Light Duty, Medium Duty and Heavy Duty cable trays.
» Perforated bottom design allows for hold down attachment, cable
attachment, and heat dissipation.
» Covers available for added cable protection from environmental
factors.
» Offered in Pre-Galvanized and Hot-Dipped Galvanized finishes.
» Accessories Available.
ENCLOSED CABLE TRAYS:
Product code
3.7 Telecommunciation Cable Gantries
Tower Accessories
37TRICOM
3.7.3 Cable ladders
vertICal / horIZontal angle Iron Cable ladders:
Product code
product details:
» Angle Iron Cable ladders are made to customer specifications.
» Available in Light Duty, Medium Duty and Heavy Duty depending
on angle iron profile.
» Welded or bolted construction with a standard galvanized finish.
» Accessories available.
3.7.2 Cable gantry support system:
Product Specifications
Pole Size 88.9mm x 3m high
Pole Size 88.9mm x 3.8m high
CABLE GANTRY SuPPORT POLE / LEG:
Product code
3.7 Telecommunciation Cable Gantries
Tower Accessories
38TRICOM
STANDARD AND SWIVEL OPTIONS
» Gin Pole Top angle 1,150mm in length, manufactured from 40 x 40
x 3 angle iron, with a 114DIA with a 3mm width pipe, with a 100 x
55 x 4 I-Beam support pole,
» Gin Pole Pipe, 6m with a 101DIA and 7mm width pipe,
» Gin Pole Base, 1,000mm in length, manufactured from 120 x 120
x 12 angle iron,
» Certified work load of 300kg,
3.7.4 gIn poles
3.7 Telecommunciation Cable Gantries
Tower Accessories
39TRICOM
3.8 Tower Fastners
bolts
Grade 4.6 / 4.8
Thread tolerance DIN 13-8g
D K S L m/m
M12 8 19
M16 10 24
M30 19 46
Grades: 4.8 / 8.8 / 10.9
D B2 B3 D2 F K LMass with nut in
Kg per 1000 units
M8 22 28 20 5 4.5
M10 26 32 24 6 5
M12 30 36 30 8 6.5
3.8.1 hdg grade 8.8 (bolts)
FASTNERS
D K S L m/m
M12 8 19
M16 10 24
Grade 4.6 / 4.8 Thread tolerance DIN 13-8g
M30 19 46
D B2 B3 D2 F K L Mass
with nut in Kg per
1000 units
M8 22 28 20 5 4.5 M10 26 32 24 6 5
Grades: 4.8 / 8.8 / 10.9 B2 For lengths up to 120mm B3 For lengths 130mm and over
M12 30 36 30 8 6.5
D S M Mass in Kg per 1000 units M8 13 6.5 5 M10 17 8 12 M12 19 10 17 M16 24 13 33 M20 30 16 65 M24 36 19 110
Grades 4 / 6
M30 46 24 223
D B1 B2 B3 K S L m/m
M20 46 52 65 12.5 30
Grades: 8.8 / 10.9 / 12.9 B1 for lengths up to 125mm B2 for lengths above 125mm to 200mm B3 for lengths above 200mm Thread tolerance DIN 13-6g
M24 54 60 73 15 36
3.8 Tower Fastners
Tower Accessories
40TRICOM
3.8.2 hdg grade 8.8 (nuts)
3.8.3 hdg grade 8.8 (washers)
nuts
washers
FASTNERS
D K S L m/m
M12 8 19
M16 10 24
Grade 4.6 / 4.8 Thread tolerance DIN 13-8g
M30 19 46
D B2 B3 D2 F K L Mass
with nut in Kg per
1000 units
M8 22 28 20 5 4.5 M10 26 32 24 6 5
Grades: 4.8 / 8.8 / 10.9 B2 For lengths up to 120mm B3 For lengths 130mm and over
M12 30 36 30 8 6.5
D S M Mass in Kg per 1000 units M8 13 6.5 5 M10 17 8 12 M12 19 10 17 M16 24 13 33 M20 30 16 65 M24 36 19 110
Grades 4 / 6
M30 46 24 223
D B1 B2 B3 K S L m/m
M20 46 52 65 12.5 30
Grades: 8.8 / 10.9 / 12.9 B1 for lengths up to 125mm B2 for lengths above 125mm to 200mm B3 for lengths above 200mm Thread tolerance DIN 13-6g
M24 54 60 73 15 36
D A B C D Breaking
torque Nm M10
Grades 6/8 Nuts are Hot Dip Galvanized to ISO 1461
M12 19 18.5 18.25 8 60-70
D D1 D2 S Mass
Kg/ 1000 units M8 9.0 17.0 1.6 2.05
M10 11.0 21.0 2.0 3.94
M12 14.0 24.0 2.5 5.85
M16 18.0 30.0 3.0 10.6
M20 22.0 37.0 3.0 16.4
M24 26.0 44.0 4.0 31.1
Supplied in: Plain / Electro Zinc Plated/ Hot Dip Galvanized
M30 30.0 50.0 4.0 39.4
D A B C D Breaking
torque Nm M10
Grades 6/8 Nuts are Hot Dip Galvanized to ISO 1461
M12 19 18.5 18.25 8 60-70
D D1 D2 S Mass
Kg/ 1000 units M8 9.0 17.0 1.6 2.05
M10 11.0 21.0 2.0 3.94
M12 14.0 24.0 2.5 5.85
M16 18.0 30.0 3.0 10.6
M20 22.0 37.0 3.0 16.4
M24 26.0 44.0 4.0 31.1
Supplied in: Plain / Electro Zinc Plated/ Hot Dip Galvanized
M30 30.0 50.0 4.0 39.4
3.8 Tower Fastners