www.tecnalia.com

VII CONGRESO INTERNACIONAL DE ENVOLVENTES ARQUITECTÓNICAS VII INTERNATIONAL CONGRESS ON ARCHITECTURAL ENVELOPES

www.icae2015.com

27-29 de mayo, 2015May 27-29, 2015Palacio de Congresos

y Auditorio KursaalDonostia - San Sebastián

España / SpainColaboradores I Partners

Patrocinadores I Sponsors

DAY 1 – WEDNESDAY MAY 27TH

(ALL CONFERENCES WITH SIMULTANEOUS TRASLATION)

Time Activity 8:00 – 9:00 Accreditations - Reception

Room A

9:00 – 9:05 Inauguration of the Congress

(Tecnalia Research&Innovation)

9:05 - 9:30 (Title Pending);

(Lorenzo Vallés); European Commission

ENG

9:30 - 10:00 (Title and author Pending)

(UNStudio) ENG

10:00 - 10:30 A facade research roadmap;

(Ulrich Knaack); TU Delft

ENG

10:30 - 11:00

Understanding European Facades - How will today’s innovations influence future facades;

(Patrick England); FAECF

ENG

11:00 - 11:30 Coffee Break

Room A Room B Room C AMANAC SESSION

11:30 - 11:50

Active transparent façades including

water-flow glazing (B. Pérez - Pujazón Millán; B.

Lauret Aguirregabiria; L. J. Claros Marfil, G. Ovando Vacarezza, J.C. Sánchez

González, J.M. Lirola Pérez) UPM, Spain

Sandwich Panels as self-supporting structural members

(Beate Hörnel-Metzger, Bernd Naujoks) University of Applied Sciences, Mainz, Germany

New generation for the insulation (Dr. Pierre-André Marchal)

PCAS, France (pending)

ENG

11:50 - 12:10

Energy Harvesting for wireless sensor nodes in architectural

envelopes; (Ivan Arakistain);

Tecnalia Research&Innovation, Spain

Full Scale Performance Testing and Evaluation of

Unitized Façade Systems (E. Ilter, A. Tavil, O.C. Celik) Department of Architecture

Istanbul Technical University, Turkey

Reactive powder concrete for facade elements - A sustainable

approach (Urs Mueller1, Natalie Williams

Portal1 Mathias Flansbjer2, Nelson Da Silva1, Katarina Malaga1, Iñigo

Larraza3, Jose Vera3) 1CBI Cement and Concrete

Research Institute, Sweden 2SP Technical Research Institute of Sweden, Sweden 3ACCIONA Technological Centre, Spain

ENG

12:10 - 12:30 Dynamic envelopes; (Roberto Buxó Doniz)

Architect; Spain

Honeycomb panel: an answer to the new requirements in architectural façades

(Zigor Marroquín Martínez, Antonio Muñoz Asorey)

Technical and System Development Department ALUCOIL

Lightweight sustainable and energy-efficient concrete with all-

waste aggregates (Alessandro Largo1, Agnese

Attanasio1, Valle Chozas2, Inigo Larraza2, Francesco Sonzogni3,

Marco Preda3, Lucian Balaceanu4 and Longin Balaceanu4)

1Department of Materials and Structures Engineering

CETMA – Engineering, Design & Materials Technologies Center,

2Concrete Group ACCIONA Infrastructure, Technological Innovation Division, 3Magnetti

Building Spa IRIDEX Group Plastic Srl,

Romania

ENG

12:30 - 12:50

Development and Construction of a Thermoelectric Active

Facade Module (María Ibáñez-Puy, José Antonio

Sacristán-Fernández, César Martín-Gómez,

Marina Vidaurre-Arbizu) Universidad de Navarra. Spain

Approach to a light-weight façade taxonomy (Cristina Pardal, Ignacio Paricio)

Universitat Politècnica de Catalunya, Spain

Sol-gel based coatings for low ice spreading on HVSC systems (Jacob A. Hansen1, Stefan

Holberg1, Ricardo Mateo1, N. Arconada, M. Hernaiz, E.

Rodriguez, R. Ortiz) 1Danish Technoloigcal Institute,

Denmark 2 IK4-Tekniker, Spain

ENG

12:50 - 13:10

Active materials for Adaptive Architectural Envelopes based on Plant Adaptation Principles

(Marlén López¹, Ramón Rubio¹, Santiago Martín¹, Ben Croxford²,

Richard Jackson³) ¹ University of Oviedo

²The Bartlett, Faculty of the Built Environment. UCL

³Institute of Biomedical Engineering. UCL ; UK

System Integration in unitized curtain wall (Andrés Campos Ventanilla, Sergi Balaguer)

Engineering Department Grupo Aluman

Environmental Assessment of Building Materials for Good Indoor

Air Quality (Sarka Langer, Anna Widheden)

IVL Swedish Environmental Research Institute, Sweden

ENG

13:10 - 13:30

Solar active envelope module with an adjustable

transmittance/absorptance (I. del Hoyo1, C. Villasante1, I.

Pagola2, M. Sánchez2, E. Aranzabe1)

1IK4-TEKNIKER 2National renewable energy

centre; Spain-UK

Freeform Surfaces Adaptation using Developable Strips and

Planar Quadrilateral Facets (Francisco González Quintial, PhD.

Javier Barrallo Calonge, PhD.) Superior Technical School of Architecture, UPV-

EHU;Donostia-San Sebastián; Spain

New Materials for Smart Windows Glazing – Optical and Mechanical

Properties (M. Willert-Porada1*, K.

Kyrgyzbaev1, A. Saberi1, B. Scharfe1, Ch. Wehmann2, F,

Rieg2, M. Arnold3) 1Chair of Materials Processing,

2Chair of Computer Aided Design, University of Bayreuth, Germany;

3InGlas GMBH, Germany

ENG

13:30-14:45 Lunch AMANAC POSTER SESSION

14:45 - 15:05

Bioenergy envelopes for cogeneration and

bioluminescence technology in cellulose factories: algae &

wood; (Cristina Jorge Camacho) Universidad de Alcalá de

Henares, Spain.

Simulation models and software for building-integrated photovoltaic systems

(M. Machado1,*, A. Sanz1, J. M. Vega de Seoane1, E. Román1, A. Saci2, J.C. Batsale2, A.

Sempey2, C. Pradère2); 1Tecnalia Research & Innovation. (Spain).

2 University of Bordeaux, France

Graphene nanoplatelets-biocomposites for advanced pultrusion profiles adapted to

building envelope (I. Roig, O. Menes and B. Monje) AIMPLAS – Instituto Tecnológico

del Plástico, Spain

ENG

Effects of flame retardants on flammability of flax fibre-reinforced

composites (Javier Sacristan Bermejo, Nayra

Uranga Loredo) Polymers and composites Group,

ACCIONA, Spain

ENG

15:05 - 15:25

A comparison between the efficiency of different methods to

simulate Climate Adaptive Building Shells

(Hoda Barzegar Ganji, Hirbod Norouzianpour, Behrouz Kari)

University of Tehran, Iran

An Experimental and Numerical Simulation Study of a Solar Wall Enhanced with Phase

Change Materials (Dionysios I. Kolaitis1, Roberto Garay Martinez2,

Julen Astudillo Larraz2, Maria A. Founti1) 1National Technical University of Athens,

Greece; 2 Tecnalia Research&Innovation, Spain

Numerical investigation of the effect of vacuum insulation panels

on the thermal bridges of lightweight drywall envelopes

(Dimos A. Kontogeorgos, Ioannis A. Atsonios, Ioannis D. Mandilaras

and Maria A. Founti) Laboratory of Heterogeneous

Mixtures & Combustion Systems, School of Mechanical Engineering

National Technical University of Athens

ENG

Monitoring of Health Related Parameters in Indoor

Environments (Manuela Reichert, Jürgen Frick)

Materials Testing Institute, University of Stuttgart

ENG

15:25- 15:45

Active facades. The future of energy efficiency. New BBVA Headquarters in Madrid, an

example of integration. (Miguel A. Núñez Díaz, Jaime Otegui Lacorzana, Jesús M.

Cerezo Miguel) Envolventes Arquitectónicas

ENAR S.L.; Spain

An Approach to Build Adaptable Envelopes with Standard Products: A Case Study

(Bahar Basarir, M. Cem Altun) Istanbul Technical University, Turkey

Structural behaviour of RPC sandwich façade elements with

GFRP connectors (Mathias Flansbjer1, Urs Mueller2,

Lech Wlasak3, Daniel Honfi1, Natalie Williams Portal2, Jan-Olof

Edgar4, Iñigo Larraza5) 1SP Technical Research Institute

of Sweden, Sweden 2CBI Cement and Concrete Research Institute, Sweden

3Mostostal Warszawa, Poland 4Projektengagemang, Sweden

5ACCIONA Infrastructure Technological Centre, Spain

ENG

Low Embodied Energy Insulation Materials and Masonry

Components for Energy Efficient Buildings

(A. Gaki1, M. Taxiarchou1, D. Panias1, C.

Panagiotopoulou1, A. Pasquali2, C. Dedeloudis3,

Valerie Spaeth4, C. Chatziastrou5, Jens Geduhn6)

1 School of Mining and

Metallurgical Engineering, NTUA, Greece; 2Morando S.r.I, Italy, 3S&B Industrial Minerals SA,

Greece; 4Redco NV, Belgium, 5FIBRAN SA, Greece

6Schlagmann Baustoffwerke, Germany

ENG

15:45 - 16:05

Free-form architectural envelopes: digital processes

opportunities of industrial production at a reasonable price.

(E.Castañeda, B.Lauret, J.M. Lirola, G. Ovando)

Technical University of Madrid; Spain

Biomimicry in climate adaptative building skins: relevance of

applying principles and strategies. (Mario Fernández Cadenas, Francisco Javier

Neila González) Universidad Politécnica de Madrid, Spain

Active paints to improve indoor air quality

(Michaela Müller, Iris Trick) Fraunhofer-Institute for Interfacial Engineering and Biotechnology,

Germany

ENG

The INTASENSE Project Approach for Toxic Gas Detection

Indoors (G.G.Mandayo1, J.Gonzalez-

Chavarri1, I.Castro-Hurtado1, I. Ayerdi1, E.Castaño1, E.Hammes3,4,

P.Ryser4, H.Knapp3) 1 Ceit and Tecnun (Universidad de

Navarra), Spain 3CSEM Alpnach, Switzerland

4Ecole Polytechnique Fédérale de Lausanne, Lab.of

Microengineering for Manufacturing, Switzerland

ENG

16:05 - 16:25

Energetic Study of a Opaque Ventilated Facade

(E. Iribar-Solaberrieta1, 2, C.Escudero-Revilla1,2,

J.M.Hidalgo-Betanzos2,3, I. Ruiz de Vergara-Ruiz de Azua1,2, P.Maroto-Millán4) 1University of the Basque

Country, Bilbao, Spain 2Laboratory for the Quality Control in Buildings of the

Basque Government Vitoria-Gasteiz, (Spain).

3University of the Basque Country, San Sebastian, Spain

4Building Engineer, Knauf GmbH Sucursal in Spain,

A Design Tool for Building Envelope’s Typical Details in Architectural Education

(Asst. Prof. Dr. M. Cem Altun, Res. Asst. Işıl Türkay, Mine Koyaz)

Istanbul Technical University, Turkey

Fostering energy efficiency in buildings through aerogel based

renders (Mohamad Ibrahim1, Etienne

Wurtz2, Patrick Achard1, Pascal H. Biwole1,3)

1 MINES ParisTech, PSL Research University, PERSEE,

Centre Procédés, Energies Renouvelables et Systèmes

Energétiques, France 2 CEA-INES, LEB - Building

Energy Lab, France 3 Department of Mathematics and

Interactions, France

ENG

Mechanically robust pectin-silica nanocomposite aerogels: potential

materials for thermal superinsulation

(S.Zhao1, A. Demilecamps2, A.Rigacci3, L.Huber1, T. Budtova2,*,

M.M. Koebel1,*) 1Laboratory for Building Energy

Materials and Components,EMPA, Switzerland;

2MINES ParisTech, Centre de Mise en Forme des Matériaux, France

3MINES ParisTech, Centre procédés, énergies renouvelables, et systèmes énergétiques, France

ENG

(Pending) ENG

16:25 - 16:50 Coffee Break

16:50 - 17:10

Ventilated façade hygrothermal behaviour assessments &

development of energy wise cladding solutions

(Dr. O.Jung) Department of Research &

Innovation Trespa International B.V.

The Netherlands

Computer-simulation study on building-façade design

and its influence on fire propagation (María P. Giraldo1, Jaume Avellaneda2, Ana

Lacasta2) 1Forest Sciences Centre of Catalonia, Spain.

2 University of Catalonia (UPC), Spain

Annex 65 (Pending) (Dr. Daniel Quenard)

CSTB, France ENG

17:10 - 17:30

Architectural Envelopes: Passive parametric building envelopes

for elevated conditions of energy fluxes

(Ismael Lara Ochoa 1; Víctor Manuel Martínez López2 ;

Adriana Hernández Sánchez2; Carola Santiago Azpiazu2)

1Universidad Cristobal Colón, Veracruz, México; 2Benemérita

Universidad Autónoma de Puebla, México

Composite UHPC-AAC/CLC façade elements with modified interior plaster for new buildings

and refurbishment (L. Miccoli1, P. Fontana1, D. Qvaeschning2, O. Kreft3, C. Cederqvist4, N. Silva5, C. Sjostrom6,

A. Klinge7) 1BAM Federal Institute for Materials Research

and Testing, Berlin, Germany; 2Dyckerhoff GmbH, Wiesbaden. Germany;3Xella Technology

and Research, Kloster Lehnin, Germany;4Aercrete Technology AB, Bankeryd, Sweden; 5CBI Swedish Cement and Concrete

Research Institute, Borås, Sweden 6Svenska Aerogel AB, Gävle, Sweden

7Roswag Architekten GvA mbH, Berlin, Germany

Bio-aerogels: new promising materials for thermal

superinsulation (Cyrielle Rudaz1, Arnaud

Demilecamps1, Georg Pour1, Margot Alves1, Arnaud Rigacci2,

Christian Beauger2, Claudia Hildenbrand2, Gudrun

Reichenauer3, Tatiana Budtova1) 1Centre for Materials Forming (CEMEF), MINES ParisTech, France; 2Centre procédés, énergies renouvelables et

systèmes énergétiques (PERSEE), MINES ParisTech,

France; Bavarian Center for Applied Energy Research,

Germany

ENG

17:30 - 17:50

Case study of a double skin façade: focus on the gap between predicted and

measured (M Comminges, A Dugue, P

Arotcharen, P Lagière); Research Technical

Organization NOBATEK; France

Do we want smart facades to be more durable than our smartphones?

(A. Mateo Marcos Núñez; Jesús M. Cerezo Miguel)

ENAR, Architectural Envelopes, Spain

Fire and thermal bridge assessment for VIPs (Prof. Maria Founti)

School of Mechanical Engineering, NTUA, Greece

ENG

17:50 - 18:10

Experiences and challenges for the development of architectural

systems when increasing insulation levels and

incorporating energy harvesting & heat delivery systems;

(Roberto Garay, Peru Elguezabal);

Tecnalia Research&Innovation

Steel Envelope: Our steel solution for your green building

(Françoise Carrara) Arcelor Mittal Europe - Flat Products

Unitized façade system in biocomposites

(Guglielmo Carra, Jan Wurm) Department of Materials

Consulting Arup Deutschland Gmbh,

Germany

ENG

18:10 - 18:30

Multifunctional energy efficient façade system for building

retrofitting, Face-lifting buildings to save energy

(Magdalena Rozanska) Acciona Infraestructuras

Spain

(Pending) Under definition

How to design an adaptive wall panel for retrofitting with multiple

innovative technologies (Isabel Lacave Azpeitia1, Rogier Donkervoort2, Tim Dijkmans3)

1ACCIONA Infraestructuras S.A., Madrid, Spain

2Netherlands Organisation for Applied Scientific Research TNO,

Delft, The Netherlands 3Netherlands Organisation for

Applied Scientific Research TNO, Delft, The Netherlands

ENG

DAY 2: THURSDAY MAY 28TH (ALL CONFERENCES WITH SIMULTANEOUS TRASLATION)

Time Activity 8:00 – 9:00 Accreditations - Reception

Room A Room B

9:00 - 9:30 Bombay Sapphire Distillery Glasshouse

(Carles Teixidor); Bellapart S.A.U.

Spanish

9:30 - 10:00 (Title and Author Pending) WATG English

10:00 - 10:30 (Title Pending)

(Jesús Cerezo); Enar Envolventes Arquitectónicas

Spanish

10:30 - 11:00 (Title Pending)

(Rafael de la Hoz); Rafael de la Hoz Arquitectos

Spanish

11:00 - 11:30 (Title Pending) (Xavier Ferrés);

Xavier Ferrés Arquitectos Spanish

11:30 - 12:00 Coffee Break AMANAC SESSION

12:00 – 12:30

A performance driven design process for glazed

envelopes (Damian Rogan and Lisa Rammig)

Eckersley o'callaghan (UK)

FIR

E W

OR

KSH

OP

Reaction to Fire and Resistance to Fire Testing and related European

Regulations: Challenges for advanced Materials.

(Prof. Alberto Fina) Politecnico di Torino (Italy)

English

12:30 – 13:00 (Title and Author Pending) SEELE GmbH

Overview of the fire characterization of materials. Specific case of the fire development of WPC for façade

applications. (Dr. Aitor Barrio)

Tecnalia Research&Innovation (Spain)

English

13:00 – 13:30 (Title and Author Pending) OMA

Façade and Structural fire Testing: State of the Art and future needs. (Prof. Michael Delichatsios)

University of Ulster (UK)

English

13:30 – 14:00 (Title and Author Pending)

Computational tools for Fire Research: Potentials and link to Performance based

Codes (Dr. Dionysis Kolaitis)

National Technical University of Athens, (Greece)

English

14:00 – 15:30 Lunch

15:30 – 17:30 SMART FACADES: TRENDS (ROUND TABLE) English - Spanish

20:00 CONGRESS DINNER (Real Club de Tenis de Donostia-San Sebastián)

DAY 3: FRIDAY MAY 29TH (ALL CONFERENCES WITH SIMULTANEOUS TRASLATION)

Time Activity

Room A Room B

9:00 - 9:30

Obsolescence of contemporary envelopes: trends and risks

(Pablo Garrido Torres) Departament de Construccions Arquitectòniques I Universitat Politècnica de Catalunya – (Spain)

STEEL WORKSHOP (Pending)

Spanish

9:30 - 10:00 Architectural envelopes in front of the Sea;

(Lucas Díaz Sierra); Díaz & Díaz Arquitectos SLP; (Spain)

Spanish

10:00 - 10:30

Technical development and assembly of Materia CAB system for the envelope of the Fundación

Botín in Santander (Francisco Sánchez, Javier Villacorta-Creus y

Roser Febrero) Departamento Técnico de Disset; (Spain)

Spanish

10:30 - 11:00

Orona Zero (Xabier Barrutieta1; Diego González2)

1Orona s.coop. 2Fachadas Singulares Uxama; (Spain)

Spanish

11:00 - 11:30 (Title pending)

(Julen Astudillo); Tecnalia Research&Innovation; (Spain)

Spanish

11:30 - 12:00 Coffee Break

12:00 – 12:30

Tower Zero: The Development of a Skyscraper’s Anatomy Through Technologic Innovation and A

New Sustainable Program (Stanford Chan, RA, William Logan, RA, John

Hannum, PE, Peter Arbour) Vidaris, Inc;

(EEUU)

English

12:30 – 13:00

Additive Manufacturing for Façade Construction – State of the Art

(Dr.-Ing. Thiemo Ebbert) Kawneer

(Germany)

English

13:00 – 13:30 (Title and author pending) VEKA English

13:30 – 14:00

Ceramic Ventilated Facades; (Brian G. Newell);

Shackerley (Holdings) Group Limited; (UK)

English

14:00 – 14:30

Challenges for the facade of the future (Max Radt)

Wicona (Sapa Building Systems GmbH); (Germany)

English

14:30 – 16:00 LUNCH AND END OF THE CONGRESS