vincenzo - anna maria brady...technical spec sheet vincenzo style: sumo citrus leotard item #:...
TRANSCRIPT
Vincenzo
Sumo Citrus Look One Tech PacksDesigner: Anna Maria Brady
Vincenzo
Sumo Citrus Leotard Tech PackDesigner: Anna Maria Brady
1.30
16.60
27.42
4.32
4.13
9.38
5.34
15.07
5.32
7.57
4.12
4.75
27.55
1.30
Model: 11/12/2019 1/2H:\CAD317\AMB-SC-LEOTARD
Comments NoneNone
Default Options: NoneSketch NoneFabric Table Fabric Table.csv
Fabric Category Name ImageS
Piece Name Piece Image Piece Category Piece Description Paste FabricFabricFabricFabric FlipsFlipsFlipsFlips HalfPiece
DynSplit
AddPiece
X Shrink Stretch (%)Piece Name Piece Image Piece Category Piece Description Paste FabricFabricFabricFabric
-- X Y X,Y
HalfPiece
DynSplit
AddPiece
X Shrink Stretch (%)
AMB-SC-LEO-F FRONT CUT 2-S No S 1 1 0 0 None 0 Yes 0.00%
AMB-SC-LEO-B BACK CUT 2-S No S 1 1 0 0 None 0 Yes 0.00%
Total = 2
Model: 11/12/2019 2/2H:\CAD317\AMB-SC-LEOTARD
Y Shrink Stretch (%)Y Shrink Stretch (%)
0.00%
0.00%
Marker name: MARKERS1 Length: 0yd 29.66in Width: 54.00inUtilization: 43.24% Model/Size/Qty : AMB-SC-LEOTARD 6/1 Unplaced/Placed: 0/4
Cutter’s MustVincenzo
Style: Sumo Citrus Leotard Date: 04/11/19
Designer: Anna Maria Brady Season: SS21
Sample in (Size): 8 Sample in (Fabric): Black crepe jersey
DESC.
S
S
PATTERNS SKETCH
COMMENTS
Seams are serged together at 1/4in
Armhole, neckline, and leg hole coverstitched at 1/2in.
Front
Back
3 x 1/4in snaps on each shoulder seam
evenly spaced.
TRIMS
CAT.
FRONT
BACK
2
2
DESC. - description (self, contrast, lining etc.)CAT. - category (how many pieces to cut)
Technical Design SketchVincenzo
Style: Sumo Citrus Leotard Date: 04/11/2019
Designer: Anna Maria Brady Season: SS21
Sample in (Size): 8 Sample in (Fabric): Black crepe jersey
Measurement Sample Size
Centre back 27.4in
Waistline
Armhole circumference
Pocket size
15in
16.8in
Centre front 27.5in
Shoulder
Sleeve length
Pant out seam
4.1in
Side seam 5.3in
Waistband width
Crotch seam
Hem sweep
1.3in
Neck circumference
Pant inseam
Belt length/width
TRIMMINGS SEWING
1/4in snaps on shoulders Serge all seams at 1/4in
Cover stitch openings @ 1/2in
18.1in
x6
SKETCH
FRONT
BACK
Technical Spec SheetVincenzo
Style: Sumo Citrus Leotard
Item #: 000000
Date: 04/11/2019
Department: Unisex
Designer: Anna Maria Brady Size Range: 4-18
Vendor: Twintex Country: USA
SKETCH
SIZE GRADING SPECIFICATIONS
Point of Measurement Grade Size 4 Size 6 Size 8 Size 10 Size 12 Size 14 Size 16 Size 18
2) Centre back length 27.4in
5) Waistline 15in
1) Centre front length
Tolerance
27.5in
4) Armhole run 16.8in
3) Side seam length 5.3in
6) Shoulder seam 4.1in
7) Crotch 1.3in
FRONT BACK
1
4(a)
2
5
4(b)
6
7
3
Vincenzo
Sumo Citrus TrouserDesigner: Anna Maria Brady
3.51 11.88
2.18
13.10
9.29
11.88
2.90
12.73
28.84
6.00
6.00
2.00 35.00
13.07
14.37
9.50
2.92
15.22
3.4814.37
2.18
28.85
30.59
6.75
5.75
2.00 37.60
Model: 11/12/2019 1/2H:\CAD317\AMB-SC-SHORTS
Comments NoneNone
Default Options: NoneSketch NoneFabric Table Fabric Table.csv
Fabric Category Name ImageS
Piece Name Piece Image Piece Category Piece Description Paste FabricFabricFabricFabric FlipsFlipsFlipsFlips HalfPiece
DynSplit
AddPiece
Piece Name Piece Image Piece Category Piece Description Paste FabricFabricFabricFabric
-- X Y X,Y
HalfPiece
DynSplit
AddPiece
AMB-SC-SP-F PANEL FRONT CUT 2-S No S 1 1 0 0 None 0 Yes
AMB-SC-SHORT-F SHORTS FRONT CUT 2-S No S 1 1 0 0 None 0 Yes
AMB-SC-SHORT-B SHORTS BACK CUT 2-S No S 1 1 0 0 None 0 Yes
AMB-SC-SP-B PANEL BACK CUT 2-S No S 1 1 0 0 None 0 Yes
AMB-SC-EGG-SIDE EGG SIDE PANEL CUT 8-S No S 4 4 0 0 None 0 Yes
AMB-SC-EGG-CENTRE EGG CENTRE PANEL CUT 4-S No S 2 2 0 0 None 0 Yes
AMB-SC-EGG-TB EGG TOP BAND CUT 2-S No S 1 1 0 0 None 0 Yes
AMB-SC-SHORT-WB SHORTS WAISTBAND CUT 1-S No S 1 0 0 0 None 0 Yes
Total = 8
Model: 11/12/2019 2/2H:\CAD317\AMB-SC-SHORTS
X Shrink Stretch (%) Y Shrink Stretch (%)X Shrink Stretch (%) Y Shrink Stretch (%)
0.00% 0.00%
0.00% 0.00%
0.00% 0.00%
0.00% 0.00%
0.00% 0.00%
0.00% 0.00%
0.00% 0.00%
0.00% 0.00%
Marker name: MARKERS Length: 3yd 8.51in Width: 54.00inUtilization: 76.38% Model/Size/Qty : AMB-SC-SHORTS 6/1 Unplaced/Placed: 0/23
Cutter’s MustVincenzo
Style: Sumo Citrus Trouser Date: 04/11/2019
Designer: Anna Maria Brady Season: SS21
Sample in (Size): 8 Sample in (Fabric): Blush cotton twill
DESC.
S
S
S
S
S
S
S
S
PATTERNS SKETCH
COMMENTS
Flat fell seam finishing 1/4in
Pin hem finish short pannels and egg side seams.
Straws applied side-by-side across all egg panels
following a pattern.
Leave seam open from top of shorts panel down.
Egg side panel
Back leg panel
Egg Centre panel
Top band
Short front
Waistband elastic @ 27in
Waistband
Short back
Top band elastic @ 18in
Front leg panel
Snap applied to side closure at top band
TRIMS
CAT.
FRONT
BACK
8
2
4
2
2
1
2
2
DESC. - description (self, contrast, lining etc.)CAT. - category (how many pieces to cut)
Technical Design SketchVincenzo
Style: Sumo Citrus Trouser Date: 04/11/2019
Designer: Anna Maria Brady Season: SS21
Sample in (Size): 8 Sample in (Fabric): Blush cotton twill
Measurement Sample Size
Centre back 49.1in
Waistline
Armhole circumference
Pocket size
27in
Centre front 49.1in
Shoulder
Sleeve length
Pant out seam
Side seam 49.1in
Waistband hieght
Yoke depth
Hem sweep
1in
18in
Neck circumference
Pant inseam
Top band hieght
TRIMMINGS SEWING
Snaps applied to top band SS Leave seam open from top of shorts panel down.
Waistband elastic Pin hem finish short pannels and egg side seams.
Top band elastic Straws applied side-by-side across all egg panels
following a pattern.
1in
2 pairs
27in
18in
SKETCH
FRONT
BACK
Technical Spec SheetVincenzo
Style: Sumo Citrus Trouser
Item #: 000000
Date: 04/11/2019
Department: Unisex
Designer: Anna Maria Brady Size Range: 4-18
Vendor: Twintex Country: USA
SKETCH
SIZE GRADING SPECIFICATIONS
Point of Measurement Grade Size 4 Size 6 Size 8 Size 10 Size 12 Size 14 Size 16 Size 18
2) Centre back length 49.1in
5) Waistline closed 27in
1) Centre front length
Tolerance
49.1in
4) Waistband height 1in
3) Side seam length 49.1in
6) Hem band hieght 1in
7) Sweep 18in
FRONT BACK
13
5(a)
4
76
2
5(b)
Course Evaluation
Anna Maria Brady
FASH317-A01
Prof. Kroener
Course Evaluation
Through this course I have further learned how vital Gerber Accumark V10 is to know and
understand for upcoming fashion designers. In this course, we learned how to draft a piece from
scratch, modify a sloper, and digitize paper patterns into the program. Through these lessons, we
learned a large variety of Gerber functions, as well as the many different paths one action can have.
Beyond Gerber, this course gave us a much more in-depth look at tech packs, how to make our
own and what is to be included. This is vital knowledge for the industry and before this course, I would
not have been confident on my ability to complete a tech pack for a company without being shown first.
Now I think I will be able to apply not only my knowledge on tech packs, but my knowledge of the
program confidently for a company, if I was given no guideline.
I have definitely implemented what has been taught and will look to utilize this program for my
senior collection. My collection includes a lot of the same pattern piece shapes, but each a different
measurement. With my knowledge of Gerber, it will be a lot quicker to modify each piece and plot, as
opposed to creating new paper patterns by hand each time.
The most difficult part of this course for me was ensuring that the measurements from the
program were directly translated correctly to the tech pack. I ran into this especially in this last
assignment. For my senior project, one of my garments is relatively abstract, containing a lot of volume
and strange measurements. Comparing the measurements with the finished piece was difficult, but in
the end, I think I was able to correctly communicate the information.