Providing Environmentally SafeAntimicrobial Smart Coatings

Cutting Edge Solutions for:

Introductions

Infection Control Industry

Antimicrobial Coating Overview

Competitors

Long Term Durability Benefits

How the Product is Applied

Who to Contact at OxiArmor

Spotlight Agenda

DID YOU

KNOW…

Americans touch an average of 300 surfaces every 30 minutes.

One cell of staph can multiply into 17 million in just 48 hours.

A Study conducted at the University of Arizona found that the most germ-infected objects were:• Cell phones• Desktops• Water fountain handles • Computer keyboards• Computer mice

What is the residual kill time of most disinfectants?

• Temporarily disinfecting the surfaces based on policy or protocol.

• Spot Cleaning when visible fluid or dirt appears.

• Perceived Cleanliness

What are some common practices for reducing the exposure to pathogens on surfaces?

What is the residual kill time of most disinfectants?

Surface Recontamination can occur immediately after a thorough cleaning.

Some Disinfectants even require a “dwell time” to reach the log reduction advertised.

Disinfectants are Temporary!

What is the residual kill time of most disinfectants?

A Professionally applied antimicrobial smart coating for continuous protection against bacteria, viruses, mold and fungi for a cleaner, healthier environment.

This coating is an energetic trap for microbes and Volatile Organic Compounds (VOCs) at a molecular level, completing their destruction through photocatalytic oxidation (PCO).

OxiArmor’s Surface Recontamination Shield (SRS)

What is the residual kill time of most disinfectants?

SRS’s Multiple Attributes

• Antimicrobial---Continuously kill all microbes

contacting the surface

• Superhydrophilic---Clean the surface continuously

• 95% UV Protection---Protects any surface from sun

damage

• Anti-Corrosive---Protect metals against corrosion

• VOC Elimination---Destroys Pollutants and Odors

What is the residual kill time of most disinfectants?

AntimicrobialOur SRS deactivates ALL dangerous microbes and

restrains proliferation by damaging their components through radical oxidation.

This broad spectrum photo-mineralization of pathogens is continuous and permanent.

Does not cause resistant strains of microbes because its killing mechanism is strictly oxidative, not enzymic

or antibiotic.

Antimicrobial coatings are protectants not disinfectants…they work in between cleanings.

What is the residual kill time of most disinfectants?

US Independent Lab Testing

The tests were designed to determine the efficacy of the antimicrobial coatings in the most adverse conditions by giving the bacteria the optimal growth environment. ALL LAB TESTS USED ONLY TYPICAL ARTIFICIAL ROOM LIGHTING. The presence of natural light or greater artificial lighting will increase the efficacy of the coating in bacterial, virus and VOC reduction.

Tests by leading US laboratories show strong, persistent and protective cleaning power in real world conditions: 98% reduction of deadly VRE bacteria in 15 minutes; prolonged virus reduction of 89% over 24 hours and strong reductions of MRSA and Staph; 91% reduction of C. difficile spores over 24 hours and 99% reduction of hydrogen sulfide over 24 hours.

What is the residual kill time of most disinfectants?

SRS is Superhydrophilic

What is the residual kill time of most disinfectants?

Self-Cleaning

What is the residual kill time of most disinfectants?

SRS’s UV Protection

• The damaging rays of Ultraviolet (UV) light cause billions of dollars of damage to paints, plastics and textiles exposed to sunlight.

• The SRS works as sunscreen on surfaces

What is the residual kill time of most disinfectants?

It’s Anti-Corrosive

SRS removes odors and breaks down dangerous VOCs and pollutants in the air.

This safe, persistent cleansing of the air occurs using both natural sunlight and, most importantly, visible light indoors.?

VOC & Odor Reduction

What is the residual kill time of most disinfectants?

Display the SAFE STAMP in your facilities to instantly communicate that additional precautions have been taken to ensure a healthy environment.

What is the residual kill time of most disinfectants?

Active Component(s) Zinc, Titanium Dioxide Ammonium Chloride Silver Ions Phenoxy Phenols (PCPP)Mode of Action Contact Photo-Oxidation Contact Dilute Chloride Salts Leaching Heavy Metal in H2O Leaching PoisonEffective Against:

Bacteria Active Bactericide Bacteriostatic Bactericide BactericideViruses Active Virucide Ineffective Against Non-

enveloped VirusesVirucide No

Spores Active Sporicide Fungistatic Sporicide NoVOCs All No No NoOdors All Bacterial only Bacterial Only Bacterial Only

Toxicity Risks To:Humans No High Toxicity to Skin and Eyes Bio-Accumulative Endocrine Disruptor

Animals & Birds No High Toxicity to Skin and Eyes Bio-Accumulative Endocrine DisruptorAquatic Systems No High Toxic, Zero Discharge

AllowedHighly Toxic, Bio-Accumulative

Toxic

Environmental Fate Risk None 5-Year Degradation Time Very High Degrades to DioxinResistant Bacteria Promotion No No Yes YesUV Damage Protection 95% No No NoMetal Corrosion Protection Yes Corrosive No NoHydrophilic Self-Cleaning Yes No No NoApplication Method Water based spray Spray Epoxy Paint Incorporated at ManufactureTreatable Surfaces All Substrates and Textiles

New or ExistingHard Surface or Textile Paintable Incorporated at Manufacture

Durability Very High Binding Removed by Surfactants (Detergents or Soap)

Incorporated Incorporated at Manufacture

Service Interval 6 mo. - 3 Years 1-3 months unless cleaned Repaint Item ReplacementRegulatory Guidance US EPA FIFRA 25B

Minimum Risk Pesticide Exempt From Registration

US EPA FIFRA Registered

US EPA Registered Currently Restricted for Review

US EPA Registered Under Regulatory Review EU banned

Antimicrobial Surface Coatings ComparisonSurface Photocatalyst Quaternary Ammonium Silver TriclosanCoating Class

What is the residual kill time of most disinfectants?

Competitors

• Silver: Agion• Triclosan : Microban• Quanternary Ammonium: Aegis

Manufacturers

• SurfaceAide• Bioshield 75• Zero Blast

Applicators

What is the residual kill time of most disinfectants?

OxiArmor’s SRS….how long will it last?

The coating can only be removed by taking part of the substrate off through high friction polishing or abrasions.

One treatment can last up to 2 years.

Once the surface is dry the coating becomes one with the substrate and cannot be removed without removing the substrate

What is the residual kill time of most disinfectants?

PCO™ Verification Ink

• A quick and easy visible quality check!• Safe, water soluble, reaction dye• The ink will change in a few minutes or less from blue to pink• Color change is proof that the SRS is protecting the surface, killing bacteria

and viruses and breaking down VOCs• Great Sales tool for both pre-sales & post-sales • Proving Surface treated are actively working

OxiArmor’s SRS….How to prove the product is still working?

What is the residual kill time of most disinfectants?

Original Sphere

Electrostatics OFF

Electrostatics ON

How is the SRS applied? Professional Electrostatic

Spray System Ensures efficacy of

coverage 70 Times more coverage

than conventional sprayers.

Treated surface dries in less than 30 seconds

40 Times greater than the force of gravity

What is the residual kill time of most disinfectants?

• Determine the surfaces and areas to be treated based on clients needs.

• Measure SQFT of footprint, walls, equipment, counters, desks, and other surfaces.

How we Bid a Project