vivlia antallaktikwn 6.6130-6930 serie std

6030 SeriesATTACHMENTS

Issue 10/2008 EAME

John Deere Werke Mannheim

Issue 10-2008 (EAME) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Tractors-1

ATTACHMENTS - FACTORY AND FIELD INSTALLEDA short description and recommendation of some ofthe various factory and field installations is given.Please note that the information, codes bundlenumbers are given for reference only, the currentprice list must be the only official orderingdocument.

Where factory installation codes or field installationbundle numbers were not available, they will be madeavailable as soon as possible.

1 Drive System

1.1 CREEPER KITS

Models: 6130 - 6630Note:This software related field installation kit

must be ordered with indication of tractorserial number!

Note:Depending on the options of the tractor, additional spare parts may be required.

Code Bundle Description

AL173288Creeper kit, PowrQuad Plus or AutoQuad Plus transmission,40 km/h (25 mph), 6 ranges

Bundle Description Remark QTY

AL160792 Creeper housingwith dowel pins 1

AL180063Field installation kitwith cab componentsfor creeper lever

1

AL172602 Suction line for 4 cyl. tractors 1AL168627 U-joint, drive shaft for 4 cyl. tractors 1

L168349 Shape hose(coolant inlet) for 4 cyl. tractors 1

L168350 Shape hose(coolant return) for 4 cyl. tractors 1

AL172604 Suction line for 6 cyl. tractors 1AL166275 U-joint, drive shaft for 6 cyl. tractors 1



6030 Series Tractors-2 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2008 (EAME)




Models: cab only: 6830Note: This software related field installation kit


Note: Depending on the options of the tractor, additional spare parts may be required.


AL173291Creeper kit, PowrQuad Plus transmission, 40 km/h (25 mph),4 ranges



1

AL172602 Suction line for 4 cyl. tractors 1AL168627 U-joint, drive shaft for 4 cyl. tractors 1AL155069 Oil line assembly for 4 cyl. tractors 1AL155071 Oil line assembly for 4 cyl. tractors 1



AL172604 Suction line for 6 cyl. tractors 1AL166275 U-joint, drive shaft for 6 cyl. tractors 1AL155072 Oil line assembly for 6 cyl. tractors 1AL159474 Oil line assembly for 6 cyl. tractors 1




AL173422

Creeper kit,PowrQuad Plus transmission, 40 km/h (25 mph) orAutoQuad Plus transmission,40 km/h (25 mph) or 50 km/h (31 mph)



1

RE201075 Transmission outputshaft with bushing 1

L64500 Loctite 574 1


Models: cab only: 6930Note:This software related field installation kit









Models: 6130 - 6630, cab only: 6830 and 6930


AL173423

Creeper kit,PowrQuad Plus transmission, 40 km/h (25 mph) orAutoQuad Plus transmission,40 km/h (25 mph) or 50 km/h (31 mph)



1

RE201075 Transmission outputshaft with bushing 1

L64500 Loctite 574 1


AL173292 Creeper kit, SyncroPlus transmission, 4 ranges


AL180063Field installation kit with cab components for creeper lever

1

AL164740 Suction line 1AL172598 Suction line 1AL166528 U-joint, drive shaft for 4 cyl. tractors 1AL169155 U-joint, drive shaft for 6 cyl. tractors 1AL155400 Connector 1L157513 Clamp 4AL159997 Formed hose, assy. for 4 cyl. tractors 1AL159998 Formed hose, assy. for 4 cyl. tractors 1AL158909 Formed hose, assy. for 6 cyl. tractors 1AL158910 Formed hose, assy. for 6 cyl. tractors 1


AL173294 Creeper kit, SyncroPlus transmission with PowrReverser, 4 ranges


AL180063Field installation kit with cab components for creeper lever

1

AL168627 U-joint, drive shaft for 4 cyl. tractors 1AL160006 Formed hose, assy. for 4 cyl. tractors 1AL160025 Formed hose, assy. for 4 cyl. tractors 1AL166277 U-joint, drive shaft for 6 cyl. tractors 1AL159999 Formed hose, assy. for 6 cyl. tractors 1AL160019 Formed hose, assy. for 6 cyl. tractors 1


AL180063 Field installation kit with cab components for creeper lever


2 HYDRAULICS

2.1 MECHANICALLY-ACTUATED SELECTIVE CONTROL VALVES -

M-SCV

The M-SCVs provide a full range of features whichgives the flexibility to operate all hydraulic equipmenton the farm. The M-SCVs are located at the rear of thetractor. The selective control valves may be used inany of the available positions.Three different M-SCV versions are available: 100 Series, 200 Series or 300 Series. These M-SCVscan be used with PFC hydraulic system (axial pistonpump) as well as with PC hydraulic system (gearpump).The M-SCV field kit contains as well thecorresponding quick couplers. The below listedactuating kits have to be ordered separately accordingto the mounting position of the M-SCV and this kitsinclude the new color-coded dust protection housings.

100 Series M-SCVThis mechanical valve features:

• 4 position lever control with detent setup• Removable detent collar to change from detent to

no detent• Maximum flow up to 60 litres/min

Models: 6130 - 6630, cab only: 6830 and 6930Note:This selective control valve may be operated by a

separat control lever or by a multi-function lever.

200 Series M-SCVIn addition to the features of the 100 Series mechanicalvalve, the 200 Series valve feature:

• Max. flow infinitely adjustable from 0 to 65 litres/min (only up to 54 litres/min with small pump)

• Selectable detents allow switching between nodetent ideal for loader operation and mechanicaldetent for continuous hydraulic motor operation

• Load check valve on the lower port preventsloader and implement linkage creep

The control dial is located on the SCV and can bereached from the operator’s seat.

Models: 6130 - 6630, cab only: 6830 and 6930Note: Please order in addition:

1 x L65382 Hose, 7.5 mm in dia1 x L65383 Hose, 5.0 mm in dia.

Note: This selective control valve may be operated by a separat control lever or by a multi-function lever.


7211 AL180369 M-SCV Series 100 withstandard quick couplers


7214 AL180370 M-SCV Series 200 withDeLuxe quick couplers


300 Series M-SCVIn addition to the features of 200 Series mechanicalSCVs, the 300 Series SCV feature:

• Only up to 54 litres/min with the small pump• Temperature compensated adjustable flow

continuously regulate the flow of oil between zeroand maximum in both directions regardless of oiltemperature. (This will give day-long constantspeed operation of hydraulic motors without theneed for adjustment.)

• Selectable hydraulic detent: the SCV lever willremain engaged until a pre-set pressure is reached.It will then automatically kick-out to the neutralposition. (This mode is particularly useful whenrepeated SCV operations are performed, such asturning a plough or drill marker cycling.)

• Load check valves on both ports prevent loaderand implement linkage creep.

Models: 6130 - 6630, cab only: 6830 and 6930Note:Please order in addition:

1 x L65382 Hose, 7.5 mm in dia1 x L65383 Hose, 5.0 mm in dia.

Note:This selective control valve may be operated by a separat control lever or by a multi-function lever.

350 Series M-SCVwith low leakage functionIn addition to the low leakage function the 350 SeriesSCVs offer the same hydraulic functions as the 300Series SCVs like e.g. three selectable hydraulicfunctions (no detent, continuous detent, „kickout“detent).Benefits of low leakage function:

• Provides better retaining of implements inintended position, if selective control valve is inneutral position.

• Reduce internal oil leakage to minimum.• Ensures that the tractor’s hydraulic supply works

almost free from leakage.

Models: 6130 - 6630, cab only: 6830 and 6930Note:This selective control valve may be operated by a

separat control lever or by a multi-function lever.

Actuating kits - LeverFor M-SCV installation on Position I

For M-SCV installation on Position III

Actuating kits - Multi-function LeverFor M-SCV installation on Position III and/or IV


AL180371 M-SCV Series 300 withDeLuxe quick couplers


AL181054 M-SCV Series 350 withDeLuxe quick couplers


AL180372Control parts andcolor-coded dust protectionhousing in green for hydaulic quick couplers

controls SCV at position I 1


AL180374Control parts andcolor-coded dust protectionhousing in brown for hydaulic quick couplers

controls SCV at position III 1


AL180376

Multi-function lever with2 functions and color-coded dust protection housingin brown and black for hydaulic quick couplers

controls SCV at position III and IV

1


2.2 M-ICV

Mechanical IndependentControl Valve (M-ICV)

Models: 6130 - 6630, cab only: 6830 and 6930Note:Depending on the options of the tractor,

additional spare parts may be required.

Models: cab only: 6130 - 6930Note:Depending on the options of the tractor,


Code Bundle DescriptionAL179315 M-ICV field kit (2 functions)


AL180657 Single lever control(2 functions)

with cab:6130 - 6930 1


with open station:6130 - 6630 1


with low profile open station:6130 - 6430

1

AL181106 ICV lines 6130 - 6630 1

AL181107 ICV lines with cab:6830 and 6930 1

Code Bundle DescriptionAL179316 M-ICV field kit (3 functions)


AL180658Single lever controlwith diverter switchesand HI-LO shifting(3 functions)

with cab:6130 - 6930 1

AL181106 ICV lines with cab: 6130 - 6630 1

AL181107 ICV lines with cab:6830 and 6930 1


3 ENGINE

Bottom guard for fuel tanksRecommended in adverse conditions, like scrub,woodland or land reclamation.

Models: 6530 and 6630

Models: 6230 - 6430, cab only: 6130

Models: cab only: 6530 - 6930

Models: cab only: 6830 and 6930Code Bundle Description8875 AL118241 Base guard for fuel tank, 207 l


8875 AL156243 Base guard for fuel tank (160 l, 165 l, 185 l)

Code Bundle Description8875 AL159939 Base guard for fuel tank, 250 l

Code Bundle DescriptionAL163513 Base guard for fuel tank, 325 l


Fuel PreheaterParticularly important in the cold season, fuelpreheaters prevent fuel waxing and subsequent filterblockage by automatically actuating a heater elementin the filter at low temperatures.


Cold start packagesWith a cold start package your tractor is fully preparedfor cold weather conditions. All required mountingparts are included in the field installation kit.

Models: 6130 - 6630, cab only: 6830 and 6930Note:not for tractors with AutoPowr transmissionNote: if the tractor is not already equipped with a

coolant pre-heater please order in addition 1 x AL173954 coolant pre-heater, 230 V

Coolant pre-heaterA cold start - defined as a start with an enginetemperature lower than 10°C - places stress on theengine. Due to the quick and unbalanced heating of theengine, parts wear out more rapidly. With the help of acoolant heater the engine block is warmed andtherefore provides an easier start and reduces wear.Furthermore, it is important that the engine reaches it’soptimum operating temperature as fast as possible.This reduces fuel consumption and reduces exhaustemissions. Result: lower operating costs and lessenvironmental pollution.


Code Bundle DescriptionAL158520 Fuel Preheater


9020 AL173953Cold start package, 230 V(charge pump pre-heater and transmission pre-heater)

Code Bundle Description9030 AL173954 Coolant pre-heater, 230 V


4 ELECTRICAL - ELECTRONICAL COMPONENTS

4.1 LIGHTS

Headlights H4, beltline-mountedThese adjustable head lamps are fitted left and right tothe beltline of the cab. The halogen-type H4 bulbsprovide excellent illumination to the front and arestrongly recommended if front mounted equipment isto be used, especially e.g. for highway use when aloader or front linkage mounted implements obscurethe beam of the normal head lamps.



Working Lights H3, beltline-mountedThese adjustable working lights are fitted left and rightto beltline of the cab and offer outstandingillumination to the front working area as well as formounted implements.


Working Lights H3,cab-roof mounted



Working Light H3,fender-mounted rear

Models: cab only: 6130 - 6930Note:can be installed RH or LH


9070 AL179967 2 beltline-mounted headlights H4, for right hand traffic


9070 AL179969 2 beltline-mounted headlights H4, for left hand traffic


AL179975 2 Working Lights H3,beltline-mounted on cab frame


AL1799702 Working Lights H3,cab-roof mounted,FRONT


AL1799712 Working Lights H3,cab-roof mounted,REAR


AL179973 1 Working Lightfender-mounted rear


4.2 MISCELLANEOUS

Multiple power outlet socket

Models: cab only: 6130 - 6930Note: Depending on the options of the tractor,


Powerstrip AdaptersPowerstrip adapters allow electrical connection formonitors and equipment not fitting the tractor’sstandard powerstrip or 3-pin outlets. Availableadapters include:

• 1 m (39.37 inch) cable for custom hard-wiring tocomponents

• Cigarette lighter-style outlet• North American-style flat 3-pin adapter• European-style round 3-pin adapter

Powerstrip adapters can also be used with the FieldOffice.





3-terminal power outlet socketThe 3-pin socket provides both 5 and 25 amp suppliesfrom the first two pins. The third pin is connected toearth.


Code Bundle DescriptionAL158785 Multiple power outlet socket

Bundle Description QTYAL117211 Bracket 1


RE67013Adapter standard connector(with 1 m / 39.37 inch cable for hard-wiring electrical components)

Code Bundle DescriptionRE67014 Adapter cigarette lighter outlet

Code Bundle DescriptionRE67015 Adapter 3-pin North American

Code Bundle DescriptionRE67016 Adapter 3-pin European

Code Bundle DescriptionAL160799 3-terminal power outlet socket


Battery cut-off switch



Back-up alarmFor customers who require an alarm in reverse speed.It is rear mounted.


Code Bundle Description9015 AL174696 Battery cut-off switch (4 cyl.)

Code Bundle Description9015 AL174697 Battery cut-off switch (6 cyl.)

Code Bundle DescriptionAL158728 Field installation kit for back-up alarm


5 MISCELLANEOUS

5.1 OPERATOR´S STATION

Super Air Comfort seat - MSG95Air suspended seat features:

• Air suspension• Horizontal adjustment 210 mm (8.27 inch) for

easy positioning in the cab.• 100 mm (3.94 inch) vertical suspension travel to

absorb even the hardest shocks.• Backrest angle adjustment: Individual backrest

inclination supports the drivers back to preventpostural anomaly and reach an optimal seatingposition for a relaxed driving in all time.

• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety.

• Height adjustment (80 mm / 3.15 inch) for an idealseat position for every body size.

• Mechanical lumbar support• Horizontal suspension (45 mm / 1.77 inch) to

damp oscillations of implements, trailers at highspeed or in difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.

• Foldable armrest with height and angleadjustment: Wide and ergonomically contouredarmrests can be individually adjusted. Ensureperfect posture in the seat and relaxed armposition. Important: Armrests that are positionedtoo low promote an asymmetrical posture andarmrests that are positioned too high lead toshoulder or neck pain.

• Operator’s manual holder: always on hand and in atidy appearance.

• Seat switch• Adjustable swivel +/-15° for easy access in and

out of the seat as well as easier control of rearimplements.

Models: cab only: 6130 - 6930Note: includes:

- mechanical lumbar support- standard seat cushion (76,2 mm / 3 inch)

Note:order in addition seat belt AL117366 and telescopic backrest extension AL174234

Air Comfort seat - MSG93Air suspended seat features:

• Air suspension• Horizontal adjustment 150 mm (5.91 inch) for

easy positioning in the cab.• 80 mm (3.15 inch) vertical suspension travel to

absorb even the hardest shocks.• Backrest angle adjustment: Individual backrest


• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety.

• Height adjustment (60 mm / 2.36 inch) for an idealseat position for every body size.



• Foldable armrest• Operator’s manual holder: always on hand and in a

tidy appearance.• Seat switch• Optional telescopic backrest extension

Models: cab only: 6130 - 6930Note: includes mechanical lumbar supportNote: order in addition seat belt AL117366


AL175598Super Air Comfort seat MSG95, air suspended with operatorpresence switch


AL179256Air Comfort seat MSG93, air suspended with operatorpresence switch


Super Comfort seat - MSG85

Mechanical suspended seat features: • Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for

easy positioning of the seat within the tractor cab• 100 mm (3.94 inch) vertical suspension travel to

absorb even the hardest shocks• Backrest angle adjustment: Individual backrest


• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety

• Height adjustment (80 mm / 3.15 inch) for an idealseat position for every body size



• Foldable armrest• Seat switch

Models: cab only: 6130 - 6930Note:order in addition seat belt AL117366

Super Comfort seat - MSG85Mechanical suspended seat features:

• Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for








• Foldable armrest with height and angleadjustment: Wide and ergonomically contouredarmrests can be individually adjusted. Ensureperfect posture in the seat and relaxed armposition. Important: Armrests that are positionedtoo low promote an asymmetrical posture andarmrests that are positioned too high lead toshoulder or neck pain.

• Seat switch• Adjustable swivel +/-15° for easy access in and

out of the seat as well as easier control of rearimplements.

• Optional operator’s manual holder

Models: without cab: 6130 - 6630, 6225 - 6525Note:order in addition seat belt AL117366


AL175599 Super Comfort seat - MSG85, mechanical suspended


AL179257 Super Comfort seat - MSG85, mechanical suspended


Comfort seat - MSG83Mechanical suspended seat features:

• Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for






• Horizontal suspension (45 mm / 1.77 inch) todamp oscillations of implements, trailers at highspeed or in difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.

• Foldable armrest• Operator’s manual holder: always on hand and in a

tidy appearance.• Seat switch• Optional telescopic backrest extension and

mechanical lumbar support

Models: cab only: 6130 - 6930Note:order in addition seat belt AL117366

Comfort seat - MSG83

Mechanical suspended seat features: • Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for






• Foldable armrest• Seat switch• Optional telescopic backrest extension, Operator’s

manual holder, adjustable swivel and mechanicallumbar support

Models: without cab: 6130 - 6630, 6225 - 6525Note: order in addition seat belt AL117366


AL179254 Comfort seat - MSG83,mechanical suspended


AL179255 Comfort seat - MSG83,mechanical suspended


Instructional seat


Suspension for Instructional seat


Safety belt for instructional seat


Leather steering wheelThe new dark-brown leather steering wheel is elegantin appearance and provides a comfortable grip evenduring long working days! It is produced in the high-standard John Deere qualityand features the same adjustability as the standardsteering wheel.


Code Bundle Description9230 AL173569 Instructional seat (not suspended)

Code Bundle DescriptionAL173570 Suspension for Instructional seat

Code Bundle DescriptionAL117734 Safety belt for instructional seat

Code Bundle DescriptionAL173828 Dark brown leather steering wheel


Inner rear view mirror


Internal rear view mirrorThe additional rear view mirror is installed on theright-hand side of the rear window (in direction oftravel). It provides an excellent view on swingingdrawbar and rear-end attachments.


External MirrorsLarge external mirrors provide increased trafficawareness for improved road safety and aid trailerreversing.

Telescopic rear view mirrorsTelescopic mirrors offer manually adjustabletelescopic arms with manually adjustable mirrors. Themirror mounts are offset on the stem to allow forfurther adjustment and better head clearance whenentering the cab.



Code Bundle Description9205 AL175679 Inner rear view mirror


AL151224 Additional inside rear view mirror,rear installation

Code Bundle Description7706 AL80126 Left hand telescopic rear view mirror

Code Bundle Description7706 AL80127 Right hand telescopic rear view mirror


Rear windscreen wiperA large rear windscreen wiper, with intermittentswitching, maintain good vision in bad weatherconditions. Micro-switches are used to isolate wipermotor when the windscreen is open.


Field office

The field office for the 6030 Series tractors is a largeportfolio pouch where papers, operator manuals, musiccassettes, personal notes and implements information,or even a laptop computer can be stored.The entire unit is removable to be carried like a briefcase. Its base is also pre-wired to accommodateelectronic devices like mobile telephones, or laptopcomputers. The lid provides a flat writing surface.

Models: cab only: 6130 - 6930Note:Depending on the options of the tractor,


Sun visor

Fold down sun visor to keep that low level sun out ofthe operator’s eyes, from dawn to dusk.


Sunshade front or rearThe John Deere pull-down sunshade improveoperator’s comfort on sunny days by blocking directlight and reducing glare. In addition, they eliminateheat build-up in the cab. Due to an independentvertical adjustment the shades can be lowered andraised to any desired position - for highest operator’scomfort. This kit can be mounted to the front or rearwindow and include all needed hardware for fieldconversion - for an easy and convenient installation.


Code Bundle Description9100 AL179028 Rear windscreen wiper

Code Bundle Description9220 AL178985 Field Office without beverage holder

Bundle Description Remark QTYAL66414 Socket outlet, 3-pins 1

AL114895 Wiring harnessfor 3-pin socket 1

Code Bundle DescriptionAL157620 Sun visor installation

Code Bundle DescriptionAL174359 Sunshade front or rear


Beverage coolerSpecifically designed for the operator’s station thebeverage cooler can be securely stored and easilyremoved. Especially on hot days the operator willappreciate the insulating capacity keeping food anddrinks cool.

Models: cab only: 6130 - 6930Note: the cool box cannot be installed on tractors

equipped with cup-holder AL163826

Bottle holder

John Deere offers a new bottle holder for convenientand safe storage of bottles in 6030 Series cabs. Ruggedplastic provides the accustomed John Deere quality.The bottle holder is installed underneath the operator’sseat in the corner between the step in the floor and theconsole.

Models: cab only: 6130 - 6930Note: not in combination with suspended

instructional seat

Cup-holder

Models: cab only: 6130 - 6930Note: the cup-holder cannot be installed on tractors

equipped with cool box AL112070

AshtrayThe ashtray is offered with hinged lid and made ofnon-flammable materials. The design conforms to therequirements of the accustomed John Deere design.The installation is easy because the ashtray fits to theexisting recess.



9215 AL112070 Cool box (incl. fastening straps, bracket and hardware)

Code Bundle Description9216 AL156731 Bottle holder, left hand

Code Bundle Description9218 AL163826 Cup-holder on front right post

Code Bundle DescriptionAL164673 Ashtray


Chock Block



2-Post roll guard

Models: without cab: 6130 - 6630

Air conditioning systemThe 6030 air conditioning system is powerful enoughto keep a comfortable in-cab temperature, whatever theoutside conditions are. The air conditioning systemuses ozone-friendly FKM10446 refrigerant.

Models: cab only: 6130 - 6430Note:This software related field installation kit



Code Bundle DescriptionLG102426 Chock Block


AL156154 Bracket for installation on the left hand side 1

AL167955 Bracket for installation on the right hand side 1

Code Bundle DescriptionAL119439 2-Post roll guard

Code Bundle DescriptionAL181222 Air conditioning system, 4 cyl.


AL180674 Bundle forair conditioning system 1

AL174402 Refrigerant hose with air-brakes 1AL174403 Refrigerant hose without air-brakes 1AL163559 Receiver dryer 1

L167673 Console, airconditioning compressor without air-brakes 1

AL157596 Deflexion roll without air-brakes 1AL176155 Refrigerant hose with air-brakes 1AL176192 Refrigerant hose without air-brakes 1

L114468 Poly-v-belt,2515 mm length

6130 and 6230with air-brakes 1


6130 and 6230without air-brakes 1


6330 withair-brakes 1


6330 without air-brakes 1

L114292 Poly-v-belt,2500 mm length 6430 1

R128660 Pulley for fan 6130 and 6230 1R128659 Pulley for fan 6330 and 6430 1FKM10446 Refrigerant 0,09


Models: cab only: 6530 - 6930Note:This software related field installation kit



Conversion from rear tiltableto front tiltable roof hatchEnhance visibility to the front and ease loader workwith the new conversion kit for roof hatch opening tothe front.John Deere offers the new conversion kit to changerear opening roof hatches to front opening. Thereforethe roof hatch is turned around and installed in reversedirection. A roof hatch opening to the front allows bettervisibility to the front which is especially importantduring front loader work. It also helps to protect yourback as you can comfortably lean back in your seatwhile observing what happens in front above you. Inaddition, you can benefit from a better air circulationin the cab with a roof hatch opening in drivingdirection. The kit contains all needed parts as well as aninstallation instruction. Please note that the kit canonly be installed if the tractor is already equipped witha roof hatch ex factory.

Models: cab only: 6130 - 6930Note: can only be installed if the tractor already has a

roof hatch ex factory

Code Bundle DescriptionAL181223 Air conditioning system, 6 cyl.


AL180674 Bundle forair conditioning system 1

AL179099 Refrigerant hose with air-brakes 1AL179098 Refrigerant hose without air-brakes 1AL163559 Receiver dryer 1

L167673 Console, airconditioning compressor without air-brakes 1

AL157596 Deflexion roll without air-brakes 1AL176155 Refrigerant hose with air-brakes 1AL176192 Refrigerant hose without air-brakes 1


6530 with air-brakes 1












6930 withair-brakes 1


6930 withoutair-brakes 1

L169990 Poly-v-belt,773 mm length 6930 1

R128660 Pulley for fan 6530 and 6630 1R128659 Pulley for fan 6830 1L169970 Pulley for fan 6930 1FKM10446 Refrigerant 0,09


AL180462 Conversion kit from rear tiltableto front tiltable roof hatch


5.2 WEIGHTSPlease note that the weights displayed in this catalogueare available through EPDC (DNS-System/JDPoint).

Front base weights

Models: 6130 - 6630, cab only: 6830 and 6930Note:not compatible with front PTO

Models: cab only: 6130 and 6230Note:not compatible with front PTONote: if tractor is equipped with a 551 Series front

loader only this front weight support can be installed (as it is dimensionally smaller than AL176563 front weight support, 60 kg)

Models: 6130 - 6630, cab only: 6830 and 6930Note:not compatible with front PTO

Quick-tatch weights

Models: 6130 - 6630, cab only: 6830 and 6930, 6225 - 6525

Note: includes 10 x 50 kg left (L38449) and 10 x 50 kg right (L38450)

Front weight stop kitThe attachment kit includes two special couplingweights weighing 50 kg each that can be used within afront weight package to create a trailer coupling. Thetotal kit weighs 100 kg.



8770 AL176563 Front weight support, 60 kg(for max. 14 quick-tatch weights)






AL71258 Set of 20 quick-tatch weights, 50 kg each

Code Bundle DescriptionAL119964 Front weight stop kit, 2 x 50 kg


Mounting kitsFor 8 - 18 quick-tatch weights




Pick up weight - 900 kgThe pick-up weight has 900 kg and fits on all baseweights. They can also be mounted on a front hitch oron the rear hitch of the tractor using the center linkbracket option code.

Models: 6130 - 6630, cab only: 6830 and 6930Note: for tractors with MFWD only, cannot be

installed in combination with front weights.


AL119967 Mounting parts for 6, 8, 10 quick-tatch weights


AL119968 Mounting parts for 12 & 14 quick-tatch weights


AL82932 Mounting parts for 16 & 18 quick-tatch weights

Code Bundle Description9508 AL112166 Pick up weight, 900 kg


Center link bracketRequired, if pick-up weight is used on the rear or front3-point hitch. Includes two spacer bushings, if 400 kgcentre pick-up weight section only is used in the 3-point hitch.


Front shields

Models: 6130 - 6430

Models: 6530, 6630, cab only: 6830 and 6930

REAR WHEEL WEIGHTS

Rear wheel weight - 38,5 kg


Note: Includes first set of parts bolted to the rim(base mounting parts).


Note: Includes additional set of parts (if basemounting parts included in AL119955 are installed).


9515 AL113121 Center link bracket for pick up weight (with distance tubes)


AL157299 Front shield(for 4 cylinder tractors)


AL157298 Front shield(for 6 cylinder tractors)


9520 AL119955 Rear wheel weight set, 77 kg (2 x 38,5 kg)


9520 AR56632 Rear wheel weight set, 77 kg (2 x 38,5 kg)


Rear wheel weight - 55 kg


Note: Includes first set of parts bolted to the rim(base mounting parts).


Note: Includes additional set of parts (if base mounting parts included in AR56636 are installed).


Note:Please order in addition mounting parts according to parts catalog.


9525 AR56636 Rear wheel weight set, 110 kg(2 x 55 kg)


9525 AL119956 Rear wheel weight set, 110 kg(2 x 55 kg)


AL176898 Rear wheel weight set on palette,(20 x 55 kg)


5.3 CHASSIS PARTS

Rigid front fendersFor safer high speed road transport and reduced tractorsoiling. Large, full-coverage flexible front fenderswith wide range of adjustments to adapt to thedifferent tread settings to protect the cab from mud anddebris.

Front fenders for 2WD tractors

Models: 6130 - 6530, 6225 - 6525

Front fenders for 4WD tractors






Conversion from rigid front fenders to turnable front fenders


Note:only for front fenders with single arm support from tractor serial no. XXXXXX


Code Bundle Description8840 AL180215 2WD front fenders


8841 AL180095 MFWD rigid front fenders,370 mm width










AL175211 Conversion kit from rigid frontfenders to turnable front fenders


L173579 Strapfor tractors with front fenders of 370, 420 and 480 mm width

2

L173580 Strapfor tractors with front fenders of 540 and 620 mm width

2

L158118 Bumper 2

37M7199 Special hex headscrew M6X25 2

AL165335 Fender stop panelfor 4 cyl. tractors with front loader application

1

AL165336 Fender stop panelfor 6 cyl. tractors with front loader aplication

1


Turnable front fendersA single arm fender for MFWD axles offers a greatersteering angle. It stops at the frame and turns while thetires move further until the maximum steering angle isreached. The turning circle now is the same as ontractors without fenders.


Note: for front loader application an additional fender stop panel AL165335 (4 cyl. tractors) or AL165336 (6 cyl. tractors) has to be ordered separately

For tire sizes:• 11.2R20• 11.2R24• 11.2R28• 12.4R24• 12.4R28• 13.6R24• 13.6R28• 280/70R16• 280/85R24• 280/85R28• 320/70R24• 320/85R24• 320/85R28• 340/85R24• 340/85R28• 360/70R24



For tire sizes:• 14.9R20• 14.9R24• 14.9R28• 16.9R24• 16.9R28• 16.9R30• 375/70R20• 380/70R24• 380/70R28• 380/85R24• 380/85R28• 380/85R30• 420/65R24• 420/70R24• 420/70R28• 420/85R24• 420/85R28• 420/85R30



For tire sizes:• 440/65R24• 480/65R24• 480/65R28• 480/70R24• 480/70R28• 480/70R30

Code Bundle Description8842 AL180096 Turnable front fender, 370 mm width






For tire sizes:• 520/60R28• 540/65R24• 540/65R28• 540/65R30• 540/75R28



For tire sizes:• 600/60R28• 600/60R30• 600/65R28

Fender side extensions

The fender extensions are a one piece design. They arecompatible for use with snow chains on the rearwheels, for example for forestry applications. Coverlarge tires and significantly reduce soiling of tractorand cab.

Models: 6130 - 6630, cab only: 6830 and 6930For tire sizes:

• 18.4R38• 460/85R38


• 13.6R38• 14.9R38• 16.9R34• 16.9R38• 18.4R34• 18.4R38• 420/85R38• 460/85R38• 480/70R34• 480/70R38• 520/70R38• 540/65R38


• 20.R38• 520/70R38• 520/85R38• 580/70R38• 600/65R38• 650/65R38




8900 AL174767 Fender side extension, 110 x 15 mm(4.33 x 0.59 inch)


8900 AL174768 Fender side extension, 110 x 60 mm (4.33 x 2.36 inch)


8900 AL174769 Fender side extension, 200 x 20 mm(7.87 x 0.79 inch)



• 20.R38• 520/70R34• 520/70R38• 520/85R38• 540/65R38• 600/65R38• 650/65R38

Fender extensionFor heavy duty work and bad weather conditions JohnDeer offers a mud flap kit for 6030 Series tractors. Themud flap provides an additional protection to avoiddirt on your tractor and following vehicles. It is madeof rugged and flexible rubber, that bears up againstworst application conditions. The kit fits to all 6030Series tractors with a 190 mm width fender extensions.

Models: cab only: 6130 - 6930Note:Can only be installed if the tractor already has a

190 x 65 mm side-extension on its fenders.

Mud Guards



8900 AL174770 Fender side extension, 190 x 65 mm (7.48 x 2.56 inch)

Code Bundle DescriptionAL159975 Fender extension

Code Bundle DescriptionAL174141 Mud guard for step


5.4 AXLES

Extensions Rear axleRear axle extensions are available to match differenttread settings.

Models: 6130 - 6630, 6225 - 6525Note: In combination with rear wheels with bolt circle

measuring 203 mm in dia.Note: Increased tread setting from 1912 mm-1976 mm

Models: 6130 - 6630, 6225 - 6525Note: In combination with rear wheels with bolt circle

measuring 203 mm in dia.Note: Increased tread setting from 1916 mm-2004 mm

Models: 6130 - 6630, 6225 - 6525Note: for 6130 - 6430 order addionally:

1 x L116668 reinforcement ringNote: Increased tread setting from 1912 mm-2138 mm

Front axle

Models: 6130 - 6430, 6225 - 6425

Note: In combination with front wheels with bolt circle measuring 275 mm in dia.

Note: Increased tread setting from 2016 mm-2134 mmCode Bundle Description

AL156776 Distance hub, 30 mm, for rear axle extension


AL156779 Distance hub, 44 mm, for rear axle extension


AL156777 Distance hub, 111 mm, for rear axle, treadadjusting


AL156778 Distance hub, 60 mm, for centering the front wheels


Track extension front and rear axleThe extended track and extra-wide vehicle lighting areintended only for 6-cylinder tractors with a 335 mm(13.19 inch) hole-circle diameter on front wheels andwith a 275 mm (10.83 inch) hole-circle diameter onrear wheels.In order to work as efficient as possible, progress inrow planting and the use of wider attachments demandflexible track widths. To meet these demands JohnDeere offers track extensions for 6-cylinder tractormodels.With the help of the extended track, it is possible tocover more rows at once and to ride within the rowswithout affecting cultivations or banks. For sprayerapplications the new field installation kits provideanother advantage: the extended track of the tractorallows a superior support and balance adjustment ofthe sprayer.Two different extensions are available:

• Extension 2 x 94 mm provides a track extension to2000 mm. Depending on the overall tractor width,additional lighting kits for extra-wide vehicles areavailable.

• Extension 2 x 219 mm provides a track extensionto 2250 mm. Depending on the overall tractorwidth, additional lighting kits for extra-widevehicles are available.

Models: 6630, cab only: 6830 and 6930Note: Maximum overall width of 2550 mm (100.4 inch)Note: For maximum overall width of 2550 - 2750 mm

(100.4 - 108.3 inch) extra-wide vehicle lighting is needed, please order in addition 1 x AL169786

Note: Must NOT be installed on tractors with dual wheels

Note: Important when extending the track of the rear axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.

Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.

Models: 6630, cab only: 6830 and 6930Note: Maximum overall width of 2750 - 3000 mm

(108.3 - 118.11 inch)Note: For maximum overall width of 2750 - 3000 mm

(108.3 - 118.11 inch) extra-wide vehicle lighting and warning sign is needed, please order in addition 1 x AL164386

Note: Must NOT be installed on tractors with dual wheels

Note: Important when extending the track of the rear axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.

Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.


AL162738 Track extended to 2000 mm(78.74 inch)


AL179433 Track extended to 2250 mm(88.58 inch)


Models: 6630, cab only: 6830 and 6930Note:Maximum overall width of 2750 - 3000 mm

(108.3 - 118.11 inch)

Models: 6630, cab only: 6830 and 6930Note:Maximum overall width of 2750 mm (108.3 inch)


AL164386 Extra-wide vehicle lighting and warning sign

Code Bundle DescriptionAL169786 Extra-wide vehicle lighting


5.5 BRAKES AND STEERING

Hydraulic trailer brakeThe hydraulic trailer brake system gives a powerful,safe braking function. The tractor brake-pedal operatedsystem gives a trailer braking function proportional tothe pressure applied to the pedal.The field kits below permit the tractor to be retro-fittedwith an hydraulic trailer brake.

Models: 6130 - 6630

Models: cab only: 6830 and 6930

Pneumatic trailer brakeThe pneumatic trailer brake system consists basicallyof a two line system. This is the same as used today oncommercial vehicles.Pre-braking function:

• short brake pedal travel allows braking of thetrailer without braking the tractor. This feature isrequired to control the trailer and prevent jackknifing.

• A quick release valve opens the trailer brakeimmediately after release of the brake pedal forbetter acceleration.

Single line systems for pneumatic trailer brakes areavailable as well. These kits are supplementary to thedual-line systems, they can not be used stand alone.The dual-line system has to be installed first before thesingle line system should be ordered.The field kits below permit the tractor to be retro-fittedwith a pneumatic trailer brake system. The pneumatictrailer brake system may be installed only on tractorsequipped with a handbrake.



Models: cab only: 6130 - 6630Note: without front axle brakeNote: Depending on the options of the tractor,


Code Bundle Description9350 AL180827 Hydraulic trailer brake

Code Bundle Description9350 AL180828 Hydraulic trailer brake


AL171459 Pneumatic trailer brake,single-line system


L101118 20 m (787.40 in.)compressed-air line (12 x 1.5) 1



9356 AL171451 Pneumatic trailer brake,dual-line system


AL171455 Additional partsfor air supply 1

AL171488Additional parts for enginewith air-conditioning(dual-line system)

6130 - 6430 1


6530 and 6630 1

AL171490Additional parts for engine without air-conditioning(dual-line system)

1

AL160421 Yellow coupler for UK only 1AL160422 Red coupler for UK only 1




Models: cab only: 6830 and 6930Note:without front axle brakeNote: Depending on the options of the tractor,





9356 AL171453 Pneumatic trailer brake,dual-line system


AL171455 Additional partsfor air supply 1


1

AL171496Additional parts for engine without air-conditioning(dual-line system)

1

AL160421 Yellow coupler for UK only 1AL160422 Red coupler for UK only 1




AL180574Air pressure gauge for pneumatic trailer brake, single-line systemand dual-line system




5.6 STORAGE Tool boxAn external detachable and lockable tool box withconvenient carrying handle is located in front of thecab.It has the capacity to hold tools and a selection oflinkage balls, hitch pins and linchpins for implementattachment.

Models: cab only: 6130 - 6930Note:The toolbox is secured to the left hand-grip

of the cab using a strap.

This tool box is attached to left-hand side (on 4-cylinder tractors) or to right-hand side (on 6-cylindertractors) of main frame.



8850 AL175285 Sheet metal tool box, mounted at the front of the cab on the left hand side


8850 AL156255 Sheet metal tool box, mountedto main frame


Additional storage container - 45l

With a capacity of 45 l and a 45 kg maximum payloadthis new sheet metal storage container offers additionalspace, e.g. for rubber boots, oil cans, bulky tools,grease guns etc. Equipped with 2 handles at the side itcan easily be carried. With the help of the includedquick lock pin the container can be closed rapidly. Thefastening on the back allows a quick installation to allexisting front weights: base weights, front weights andthe 900 kg pick up weight.


Note: 45 kg maximal payload; only for front installation: attachable to base weights, front weights and 900 kg pick up weight.

Code Bundle DescriptionAL120005 Storage container, 45 l


5.7 HITCHES AND ASSOCIATED EQUIPMENT

Release cablesFor upper and lower link hooks including hardware(screws, clamps, holder etc.)


Remote control switches for 3-point hitch, fender-mounted rear

Models: cab only: 6130 - 6930Note: include 2 switches for LH and RH installationNote:This software related field installation kit


Remote control switches for PTO,fender-mounted rear

Models: cab only: 6130 - 6930Note: include 2 switches for LH and RH installationNote: This software related field installation kit


Draft-Sensing Pin




AL81619 Cables for controlling the center link and draft links


AL180493 2 remote control switchesfor 3-point hitch


AL180494 2 remote control switchesfor PTO

Code Bundle DescriptionAL116748 Draft-Sensing Pin

Bundle Description Remark QTYL170711 Panel 1L102219 Paste 1


Stabilizer bar “Economy” An adjustable stabilizer bar provides positive controlof lateral sway when using mounted equipment on6030 Series tractors. For use only with cat. II and cat.III flat bar draft links.


Note: It can be used RH or LH;not for use with high-clearance drawbar;if both, RH and LH stabilizers are desiredplease order two of these kits.

Models: cab only: 6830 and 6930Note: It can be used RH or LH;

not for use with high-clearance drawbar;if both, RH and LH stabilizers are desiredplease order two of these kits.

Automatic stabilizer barAutomatic stabilzer bars offer for the respectiveimplements the possiblity to have:

• lateral sway over a self defined lower rangeand no sway above, or

• no sway over the whole range

Models: 6130 - 6630, 6225 - 6525


Code Bundle DescriptionAL117961 Stabilizer bar “Economy”

Code Bundle DescriptionAL151119 Stabilizer bar “Economy”


AL176759

Automatic stabilizer bar

(include automatic stabilizer barfor one side and shock absorberfor the other side)


AL176760

Automatic stabilizer bar

(include automatic stabilizer barfor one side and shock absorberfor the other side)


Stabilizer chains with sway control blocksFor almost universal implement control.

Models: 6130 - 6630, 6225 - 6525Note: for tractors with telescopic lift link or flat steel

lift link order in addition:

Lock for draft link hooksWhen implements with asymmetrical load areattached, or when driving through high-growingbushes and trees, the draft links must be securedagainst opening accidentally.


Swinging drawbar

Drawbars are adjustable in length and the swingingfeature can also be locked out.

Models: 6130 - 6630, 6225 - 6525

Models: cab only: 6830 and 6930Note: not used with Powrshift transmission

Code Bundle DescriptionAL80849 Stabilizer chains

Bundle Description QTYL79378 Console for cat. II or cat. III 219M7489 Screw M16x45 for cat. II 419M7409 Screw M16x50 for cat. III 4

Code Bundle DescriptionAL165485 Lock for draft link hooks

Code Bundle Description9441 AL80054 Swinging drawbar with hammer strap


9441 AL81349 Swinging drawbar with hammer strap, includes swinging drawbar L115073


Models: cab only: 6830 and 6930Note: used with Powrshift transmission

Guide Ball HolderTo store the guide balls for hook type 3 point hitch andtop link quick couplers just where they are needed.

Models: 6130 - 6530,6225 - 6525


Hitch Holder for upper wagon hitchChanging the implement from trailer to three-pointhitch in the field and not knowing where to put theupper trailer hitch. John Deere now offers the solution- the hitch holder for the upper wagon hitch. Theholder is a convenient solution that can easily bemounted within minutes onto all kinds of front weightswith coupling recess. The wagon hitch can easily beaffixed and is stored in a convenient height you canreach without stooping. The holder is adjusted withtwo fixing screws that again can be adjusted in twowidths depending on the weight the holder has beenmounted onto.



9441 AL119419 Swinging drawbar, includes swinging drawbar AL151017

Code Bundle Description9463 AL179161 Guide Ball Holder Cat.II

Code Bundle Description9463 AL180047 Guide Ball Holder Cat. III

Code Bundle DescriptionAL165650 Hitch holder for upper trailer hitch


Load control shaft, support

Models: cab only: 6830 and 6930Note: from serial no. XXXXXX

Center link




Hydraulic Center linkThe length of the hydraulic center link can be adjustedfrom the driver’s seat using the 3rd selective controlvalve. In addition, the center link can be actuated fromthe remote control switches on the fender.

Models: 6130 - 6630


Code Bundle DescriptionAL160835 Load control shaft support


7352 AL176534Center Link with hook and ball bushing, Cat. 2(rear hitch lift capacity 20 - 27 kN)


AL176533Center Link with hook and ball bushing, Cat. 3(rear hitch lift capacity 31 - 41 kN)


AL176532Center Link with hook and ball bushing, Cat. 3(rear hitch lift capacity 43 kN)


AL174550 Hydraulic Center Link(Cat. 3/70)


AL174551 Hydraulic Center Link(Cat. 3/90)


Hydraulic pick-up hitch (SCV controlled)

Models: 6130 - 6630, 6225 - 6525

Models: 6130 - 6630, 6225 - 6525Note:Depending on the options of the tractor,

additional spare parts may be required:


Models: cab only: 6830 and 6930Note:Depending on the options of the tractor,

additional spare parts may be required:


AL174109Field installation kit forhydraulic pick-up hitch(manually actuated)


AL174443Control components for upgrading AL174109 to electro-hydraulic controlled pick-up hitch


AL174516 Inlet valve forPrio 2 option 1

AL174348 3-terminal socketat C-Post 1

L167830 Spacer, 58 mm 1L167831 Spacer, 44 mm 1


AL174110Field installation kit forhydraulic pick-up hitch(manually actuated)


AL174444Control components for upgrading AL174110 to electro-hydraulic controlled pick-up hitch


AL174516 Inlet valve forPrio 2 option 1

AL174348 3-terminal socketat C-Post 1

L167830 Spacer, 58 mm 1L167831 Spacer, 44 mm 1


Low position hitcheswith 3-in-1 wagon hitch





Code Bundle Description9419 AL177172 Rail with piton fix insert slider

Code Bundle DescriptionAL177174 Piton fix insert slider

Code Bundle Description9405 AL177173 Rail with ball typ insert slider

Code Bundle DescriptionAL177175 Ball typ insert slider


Low position wagon hitchesfor 9-position rail


Note: for 9-position rail only


Note: for 9-position rail only

Forced steering systemfor wagon hitch height-adjustable(ball type)



Forced steering systemfor insert slider (ball type)




AL176731 Wagon hitch height-adjustable,piton fix


AL176726 Wagon hitch height-adjustable,ball


AL176727Forced steering system (two sides)for wagon hitch height-adjustable,ball type


AL176728Forced steering system (one side)for wagon hitch height-adjustable,ball type


AL176729 Forced steering system (two sides)for ball typ insert slider


AL176730 Forced steering system (one side)for ball typ insert slider


Yoke for draft link supportHinged to the left and right hand side rear axle, itprotects the draft sensor pins from shock loads underextreme draft work.


Code Bundle DescriptionAL78129 Yoke for draft link support


5.8 VANDALISM PROTECTION KITS

Models: 6130 - 6630, 6225 - 6525

Security door lock kitLocking the cab with an individual key, different fromthe standard ignition key, is helpful for many differentapplications of the tractor. John Deere therefore offersthe Security door lock field installation kit. It featuresan individual key system that prevents misuse of thestandard ignition key. This field kit provides individualsecurity by individual keys for all equipment keptinside the cab. The kit comes with four keys, in case ofdamage or loss a blank key can be ordered.

Models: cab only: 6130 - 6930Note: if needed please order in addition:


AL110170 Field kit, latch for oil filler neck, transmission - vandalism protection

Code Bundle DescriptionAL71345 Security door lock kit

Bundle Description QTYAL71350 Blank key 1


Lockable fuel tank cap


Vandalism protection

Models: 6130 - 6430

Models: 6530 and 6630, cab only: 6830 and 6930

Code Bundle DescriptionAL113087 Lockable fuel tank cap Code Bundle Description

AL175117Vandalism protection(include lock for side panel and hood, latch for transmission oil filler neck and lockable fuel tank cap)


AL175118Vandalism protection(include lock for side panel and hood, latch for transmission oil filler neck and lockable fuel tank cap)


Numerical Index

Bundle No. Page Bundle No. PageAL71258 21 AL163513 7AL71345 45 AL163826 18AL78129 44 AL164386 31AL80054 38 AL164673 18AL80126 16 AL165485 38AL80127 16 AL165650 39AL80849 38 AL169786 31AL81349 38 AL171451 32AL81619 36 AL171453 33AL82932 22 AL171459 32AL110170 45 AL173288 1AL112070 18 AL173291 2AL112166 22 AL173292 3AL113087 46 AL173294 3AL113121 23 AL173422 2AL116748 36 AL173423 3AL117734 15 AL173569 15AL117961 37 AL173570 15AL118241 7 AL173828 15AL119419 39 AL173953 8AL119439 19 AL173954 8AL119955 23 AL174109 41AL119956 24 AL174110 41AL119964 21 AL174141 28AL119967 22 AL174359 17AL119968 22 AL174443 41AL120005 35 AL174444 41AL151119 37 AL174550 40AL151224 16 AL174551 40AL156243 7 AL174696 11AL156255 34 AL174697 11AL156731 18 AL174767 27AL156776 29 AL174768 27AL156777 29 AL174769 27AL156778 29 AL174770 28AL156779 29 AL175117 46AL157298 23 AL175118 46AL157299 23 AL175211 25AL157620 17 AL175285 34AL158520 8 AL175598 12AL158728 11 AL175599 13AL158785 10 AL175679 16AL159939 7 AL176532 40AL159975 28 AL176533 40AL160799 10 AL176534 40AL160835 40 AL176563 21AL162738 30 AL176564 21

Bundle No. Page Bundle No. PageAL176565 21 AL180374 5AL176726 43 AL180376 5AL176727 43 AL180462 20AL176728 43 AL180493 36AL176729 43 AL180494 36AL176730 43 AL180574 33AL176731 43 AL180827 32AL176759 37 AL180828 32AL176760 37 AL181054 5AL176898 24 AL181222 19AL177172 42 AL181223 20AL177173 42 AR56632 23AL177174 42 AR56636 24AL177175 42 LG102426 19AL178985 17 RE67013 10AL179028 17 RE67014 10AL179161 39 RE67015 10AL179254 14 RE67016 10AL179255 14AL179256 12AL179257 13AL179315 6AL179316 6AL179433 30AL179967 9AL179969 9AL179970 9AL179971 9AL179973 9AL179975 9AL180047 39AL180063 1AL180095 25AL180096 26AL180097 25AL180098 26AL180099 25AL180100 26AL180101 25AL180102 27AL180103 25AL180104 27AL180215 25AL180369 4AL180370 4AL180371 5AL180372 5

vivlia antallaktikwn 6.6130-6930 serie std

Documents