vmc-g
DESCRIPTION
model GTRANSCRIPT
-
DESCRIPTION - VMC - G Vibration Isolating Rubber Hangers aredesigned to reduce the transmission of Vibration and Noise producedby suspended equipments, piping and ductwork. VMG - G hangers incorporated with a noise aborbing rubber insert with cast-in loadtransfer. Plate at the top and bottom, assembled into rectangularsteel box. Ultimate design of VMC - G hanger rubber allows greaterdeflection maximum up to 6mm with capacities from 25 Kgs to 450Kgs. VMC - G Rubber Hangers may be selected where first cost must be minimized. Model VMC - G are recommended for the isolation of vibration Produced by suspended mechanical equipment,axial and exhaust fans, ductwork, piping, etc. Double deflection modelVMC - GG adds another rubber element at the top of the hangerbox.
Model VMC - G hangers are shipped fully assembled and ready forinstallation in threaded rod suspended systems.
SPESIFICATION - Vibration Isolators for suspended equipment, piping and ductwork with maximum static deflection requirementsunder operation load condition not exceeding 6mm shall be hangersconsisting of neoprene or synthetic rubber noise absorbing insertincased in a welded rectangular.
The rubber insert shall be molded from oil resistant compounds, withcast in load transfer plate at the top and bottom, shall be color codedor otherwise identified to indicate load capacity.
Vibration isolating rubber hanger assembly shall be model : VMC - G,as manufactured by VMC.APPLICATION - VMC - G Vibration Isolating hangers are use to
isolate suspended sources of audible frequency vibration, or isolationor noise in piping and ductwork system
Model : VMC - G Model : VMC - GG
VMC - G TYPE RUBBER HANGER
VMC-G-25
VMC-G-35
VMC-G-50
VMC-G-80
VMC-G-120
VMC-G-150
VMC-G-200
VMC-G-300
VMC-G-450
25
35
50
80
120
150
200
300
450
440
660
990
176
264
330
55
77
110
4
5
6
40
50
55
40
50
55
40
50
55
37
60
85
48
60
98
90
110
135
MODEL
DESIGN
LOADING
Kgs Lbs
MAXIMUM
STATIC
DEFLECTION
DURO-
METER
10
14
18
115
130
160
11
15
18
25
28
39
A BVMC-G VMC-GG
C C
D E
MAXIMUM
ROD DIA.
(MRD)
Vibration Mounting Controls
VMC - G Vibration Isolating Rubber Hanger
Model : VMC - G
10
USA Advantage Vibration Isolator Technology
Page 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8Page 9Page 10Page 11Page 12Page 13Page 14Page 15Page 16Page 17Page 18Page 19Page 20Page 21Page 22Page 23Page 24Page 25Page 26Page 27Page 28