voice evacuation

1

VOICE EVACUATIONCATALOGUEVOICE EVACUATIONCATALOGUE

2

Johannesburg Head Office | +27 11 974 0633 | [email protected] Town | +27 21 787 9378 | [email protected]

Durban | +27 31 573 7400 | [email protected]

www.wildandmarr.co.za www.twitter.com/wildandmarr www.facebook.com/wildandmarr

3

INDEX

1. Ateis..................................................................................................................4-11

2. Penton..............................................................................................................12-16

3. WMA.................................................................................................................17-27

4. Inter-M.............................................................................................................28-32

5. BSS.....................................................................................................................33-38

6. Crown...............................................................................................................39-44

7. DBX....................................................................................................................45-49

4

Compliant Systems&

5

DESCRIPTIONDIVA8 System Master Public address and emergency sound system control unit.FEATURESUp to 45 minutes of digital messages can be downloaded and recorded as WAV files directly from a computer into DIVA8MG2 Master Unit. Two messages can be played simultaneously in different zones. USEDSmall to Medium InstallationsENVIRONMENTAll these features make DIVA8 System the ideal solution for shopping malls, hotels, restaurants, museums and many other public places.SPECIFICATIONSMains power supply: 115 or 230 VAC ±15%, 50/60 HzFrequency response: -3 dB @ 20 Hz and 20 kHzFireman’s microphone 1 x: Connector 5-pin locking-DINFrequency response -3 dB @ 200 Hz and 10 kHzS/N >70 dBu, THD < 1% @ 1 kHzSignal -40 to -30 dBu, Output impedance 10 kohmMonitor loudspeaker: Frequency response -3 dB @ 200 Hz and 10 kHzS/N >70 dBu, THD < 5% @ 1 kHz @ 8ohm, Signal 16 dBuAmplifier lines in: 2 x 100 VMax rated output power 1000 W (cont. at 40°C)Frequency response -3 dB @ 50 Hz and 18 kHzInput level 16 dBuNet weight: 7.5kgs

Public Address - Voice AlarmDIVA8MG2

6

DESCRIPTIONThe DIVA8S G2 Slave unit is an extension unit for the DIVA8M G2 Master. It increases the number of paging zones by 8 zones for each slave unit added in the systemFEATURESThe DIVA8SG2 Slave unit also extends the amount of input and output contacts. It includes 9 alarm inputs triggered either by dry contact or voltage (software setting), 8 logic input contacts, 2 external fault input contacts and 8 output contacts.USEDSmall to Medium InstallationsENVIRONMENTAll these features make DIVA8 System the ideal solution for shopping malls, hotels, restaurants, museums and many other public places.SPECIFICATIONSMains power supply: 115 or 230 VAC ±15%, 50/60 HzFrequency response: -3 dB @ 20 Hz and 20 kHzAmplifier lines in 2 x 100 V:Max rated output power 1000 W (cont. at 40°C)Frequency response -3 dB @ 50 Hz and 18 kHzInput level 16 dBuLoudspeaker lines out 16 x: Rated load resistance 100 ohm (100 V)Rated power 100 W (cont. at 40°C)Net weight: 3.9kgs

DESCRIPTIONColour touch Screen secure paging consoleFEATURESThe ATEIS range of security systems complies with current architectural demands requiring IP and/or fibreoptic networking to cater for any possible PAVA design, however complex. ATEIS responds to Public Address and Voice Alarm requirements as stated in EN54-16, ISO 7240-16 and BS5839/8, with specific attributes for compliance in large in-stallations.USEDCall-paging, message broadcasting and DSP matrix parameter control over a secure (monitored) busENVIRONMENTPSS is a versatile device that fits as well in a com-mercial shopping centre as in an industrial high-se-curity environmentSPECIFICATIONSBattery power supply: 18 - 26 VDCFrequency response: -3 dB @ 200 Hz to 8 kHzTHD: < 1% @ 1 kHzOutput level Max: 6 dBuMonitoring speaker: Impedance 4 Ohm, Output power 1 W @ 1 Khz, Frequency response -3 dB @ 200 to 12 kHzNet weight: 1.1kgs

Public Address - Voice AlarmDIVA8SG2

Paging StationPSS-G2

7

DESCRIPTIONThe IDA8C is a third generation modular system that complies with current architectural demands requiring IP-and/or Fiber-optics Networking to cov-er for any complex design possible.FEATURES8 analogue audio inputs and 8 analogue audio out-puts. The outputs have selectable 18 or 20 kHz monitoring signal for end-off-line monitoring or, using defined monitoring windows, individual moni-toring with an accuracy of up to 5% of the total line load.USEDIntegrates Fire-Alarm with Voice-AlarmENVIRONMENTSpecific attributes for compliance in large installa-tions.SPECIFICATIONSInterfaces: Standard Local Networking, 2 x RJ45. 100 mEthernet interface: TCP/IP, MODBUS, Vox-Net and 3rd part devices Return 100 Volt lines input from amplifiers Outgoing 16 (8+8) 100 Volt lines to the loudspeak-ers. (AB-zoning)Optional 2 slots for 8 mic/line or AES/EBU audio inputs/outputs.9 logic inputs and 8 logic outputs.Security contacts for: evacuation and fault report-ing and fault-back inputs (BSI).

DESCRIPTIONThe IDA8S(AB) Slave units provide audio in- and output expansion of the IDA8 Systems using a secured 48- channel audio and data network over CAT5 or fiber optic.FEATURES8 balanced 0 dB audio inputs and 8 balanced 0 dB audio outputs, 2 security microphone access points, control inputs and outputs.USEDPublic address and emergency sound systemslave unitENVIRONMENTSpecific attributes for compliance in large installa-tions.SPECIFICATIONSMains power supply: 115 or 230 VAC ±15%, 50/60 HzFrequency response: -3 dB @ 20 Hz and 20 kHzLoudspeaker lines in 8 x 100 V: Rated load resist-ance 20 ohm (100 V)Rated load capacitance 250 nF (100 V)Rated output power (per channel)500 W (cont. at 40°C)Loudspeaker lines out 8x (A+B): Rated load resist-ance 20 ohm (100 V)Rated load capacitance 250 nF (100 V)Rated output power (per channel) 500 W (cont. at 40°C)Net weight: 5kgs

DESCRIPTIONColour touch Screen secure paging consoleFEATURESThe ATEIS range of security systems complies with current architectural demands requiring IP and/or fibreoptic networking to cater for any possible PAVA design, however complex. ATEIS responds to Public Address and Voice Alarm requirements as stated in EN54-16, ISO 7240-16 and BS5839/8, with specific attributes for compliance in large in-stallations.USEDCall-paging, message broadcasting and DSP matrix parameter control over a secure (monitored) busENVIRONMENTPSS is a versatile device that fits as well in a com-mercial shopping centre as in an industrial high-se-curity environmentSPECIFICATIONSBattery power supply: 18 - 26 VDCFrequency response: -3 dB @ 200 Hz to 8 kHzTHD: < 1% @ 1 kHzOutput level Max: 6 dBuMonitoring speaker: Impedance 4 Ohm, Output power 1 W @ 1 Khz, Frequency response -3 dB @ 200 to 12 kHzNet weight: 1.1kgs

Public Address - Voice Alarm

IDA8C


IDA8SAB


PSS-AS

8

DESCRIPTIONThe URGP32I is an extension unit to the IDA4M/XM, DIVA8 and IDA8-Systems. Each URGP32I will provide those systems with 32 additionnal alarm inputs. Each input is monitored and can be pro-grammed to trigger a digital audio message into a specific zone or group of zones. The URGP32I is linked to the System units trough a RS232 /RS485 monitored serial link.FEATURESDesktop enclosure; Secured RS232/RS485 link to controllers and slaves; 32 alarm inputs; Status and fault indicator USED:Trigger a digital audio message into a specific zone or group of zones.SPECIFICATIONSBattery power supplyVoltage: 18 - 26 VDCPower consumption: 30 mA SystemEvacuation inputsContact mode: 5 VDCVoltage mode: -6 dBuMonitoring resistor: 4K7 OhmCableCable type: CAT-5 (FTP)Weight: 0.5 kg

DESCRIPTIONThe DPAfour125 is a 2U high 19” rack mountable, 4-channel class-D power amplifier, transformer isolated for 100 V, 70 V, 50 V and low-impedance distributed loudspeaker systems. Each amplifier can deliver up to 1000 Watt when used in bridged mode or in separate channels of 125 or 250 Watt.FEATURES4 audio outputs (100/70/50 V / 4 Ohm selectable), Fault reporting outputs, Four audio inputs with gainUSED: Designed for any public address or voice alarm system applicationSPECIFICATIONSMains power supply:Voltage 115 or 230 VAC ±15%, 50/60 HzPower consumption** standby - idle* - PmaxDPA4125 1 W – 38 W – 600 WLine inputs - 4 x (One per channel)Connector 3-pin phoenixFrequency response +/-3 dB @ 50 Hz and 20 kHz, S/N > 90 dB, THD < 0,1% @ 1 kHzInput sensitivity 770 mV Input impedance 20 kOhmLoudspeakers outputs DPA4125Rated load resistance 80 ohm (100 V)Rated load capacitance 62,5 nF (100 V)Rated output power(per channel) 125 W (cont. at 40°C)Two channels bridged 250 W (cont. at 40°C)Frequency response 40 Hz to 20 kHz(-3 dB)Weight: 17kg

DESCRIPTIONThe DPAfour250 is a 2U high 19” rack mountable, 4-channel class-D power amplifier, transformer isolated for 100 V, 70 V, 50 V and low-impedance distributed loudspeaker systems. Each amplifier can deliver up to 1000 Watt when used in bridged mode or in separate channels of 125 or 250 Watt.FEATURESDPA four 250: 4 x 250 Watt class-D power amplifi-er. It can be bridged into 2 x 500 W. 2U high, 19-inch rack mountable.USED: Designed for any public address or voice alarm system applicationSPECIFICATIONSMains power supply:Voltage 115 or 230 VAC ±15%, 50/60 HzPower consumption** standby - idle* - PmaxDPA4250 1 W – 44 W – 1169 WLine inputs - 4 x (One per channel)Connector 3-pin phoenixFrequency response +/-3 dB @ 50 Hz and 20 kHz, S/N > 90 dB, THD < 0,1% @ 1 kHzInput sensitivity 770 mV,Input impedance 20 kOhmLoudspeakers outputs DPA4250Rated load resistance 40 ohm (100 V)Rated load capacitance 120 nF (100 V)Rated output power(per channel) 250 W (cont. at 40°C)Two channels bridged 500 W (cont. at 40°C)Frequency response 40 Hz to 20 kHz(-3 dB)

Alarm Input Extension Unit

URG 32I

Digital Power AmplifiersDPAFour 125

Digital Power AmplifiersDPAFour 250

9

DESCRIPTIONThe battery chargers are microprocessor based devices that have been designed to charge lead-ac-id batteries (backup batteries connected to the Voice Alarm System) and, simultaneously, to pro-vide DC back up power to auxiliary devices such as the DIVA8, IDA8 & power amplifiers. For Small Systems use: SONEAS 6/40 -112AHFor Large Systems use: SONEAS 12/150 - 225AHFEATURESThe SONAES is equipped with heavy duty power connectors and an main battery entry for extra safety during installation. All outputs are electron-ically fused (20 A)USED:To provide power to auxiliary devices such as the DIVA8 and IDA8 system controllers.SPECIFICATIONSElectrical - Mains power supply:Voltage 115 or 230 VAC ±15%, 50/60 HzPower consumption 380 W at Full loadBattery power supply:Voltage 24 VDC, Maximum charging currentSoneas 6/40 6 Amp, Soneas 12/150 12 AmpOuputs:Main for amplifiers, Soneas 6/40 2 x 20 ASoneas 12/150 6 x 40 A, Auxiallairy for controllers 3 x, Maximum current 5 AmpWeight:SONEAS 6/40 4.9 kg SONEAS 12/150 6 kk

DESCRIPTIONATEÏS has developed its own audio networking system ’’ATEÏS-Net Secured Audio Network’’. This Ethernet based network is able to simultaneously transport 48 audio channels (32 bits, 48 KHz sam-pling rate) with a latency <1msec together with the necessary control data.FEATURESUp to 32 LAP-AS’s can be connected together on the same network. As the Network addresses are auto-negotiated, the network set up is very easy. Once programmed, the system will be able to work independently (off-line) without the PC. USED:Commercial AudioSPECIFICATIONSWith 2 x RJ45 connectors for CAT5 cabling (port A and B),48 audio channels,32 bits,48 kHzNetcard. Max 100. / 300ft between two LAP’s

DESCRIPTIONATEÏS has developed its own audio networking system ’’ATEÏS-Net Secured Audio Network’’. This Ethernet based network is able to simultaneously transport 48 audio channels (32 bits, 48 KHz sam-pling rate) with a latency <1msec together with the necessary control data.FEATURESUp to 32 LAP-AS’s can be connected together on the same network. As the Network addresses are auto-negotiated, the network set up is very easy. Once programmed, the system will be able to work independently (off-line) without the PC. USED:Commercial AudioSPECIFICATIONSWith 1 x STFiber (port A) + 1x RJ45 connectors (port B). Multi-mode, 48 audio channels, 32 bits, 48 kHz, netcard. Max. 2000 m / 6000 ft between two LAPs

SONAES - Charger & Monitoring unit

Sonaes 6/40 - Sonaes 12/150

Secured Audio NetworkC1


10


ATEIS StudioIntegrated Software Platform

DESCRIPTIONATEÏS has developed its own audio networking system ’’ATEÏS-Net Secured Audio Network’’. This Ethernet based network is able to simultaneously transport 48 audio channels (32 bits, 48 KHz sam-pling rate) with a latency <1msec together with the necessary control data.FEATURESUp to 32 LAP-AS’s can be connected together on the same network. As the Network addresses are auto-negotiated, the network set up is very easy. Once programmed, the system will be able to work independently (off-line) without the PC. USED:Commercial AudioSPECIFICATIONSWith 1 x ST-Fiber (port A)+1 x StFiber (port B), Multimode, 48 audio channels, 32 bits, 48 kHz, netcard. Max 2000 m / 6000 ft between two LAPs.


DESCRIPTIONATEÏS has developed its own audio networking system ’’ATEÏS-Net Secured Audio Network’’. This Ethernet based network is able to simultaneously transport 48 audio channels (32 bits, 48 KHz sam-pling rate) with a latency <1msec together with the necessary control data.FEATURESUp to 32 LAP-AS’s can be connected together on the same network. As the Network addresses are auto-negotiated, the network set up is very easy. Once programmed, the system will be able to work independently (off-line) without the PC. USED:Commercial AudioSPECIFICATIONSWith 1 x RJ45 connector (Port A) 1 x ST-Fiber connector (Port B). Multi-mode, 48 audio channels, 32 bits, 48 kHz, netcard. Max 2000 m / 6000 ft between two LAPs.

DESCRIPTIONATEÏS-Studio™ allows complete audio systems with a multitude of similar or different devices to be configured, supervised and controlled centrally from a single user interface.FEATURESThe whole system configuration can be stored and reloaded at the push of a button (Preset), depend-ing upon the application. Customers can design their own graphic user interface or control panel(s) as well as program automatic sequences (Events) and create different levels of user groups. (Secu-rity). USED:ATEÏS-Studio™ provides a complete set of tools and building blocks for real-time control, monitor-ing and design of an audio system or Voice Evacua-tion system from paging desk to loudspeaker.SPECIFICATIONSConfiguration software:Runs on WindowsAssignable access levels with rights managementAll system and unit parameters can be configuredEasy navigation Diagnostic and logging software: Call, fault and general event loggingOn-line logging functionHistorical loggingEvent display priority can be changedPassword-protectedFile transfer software: PC-based applicationSupplied together with the network controllerCreation of message setsOff-line configuration

11

Condenser MicrophonePPM8WJB

DESCRIPTIONCompatible with UAP and LAP’s system units, PPM WJB uses a RS485 protocol over a single CAT5 ca-ble connection, to transport both Audio and Power from the PPM WJB and to the system units.FEATURES 8 paging programmable keys with status and 1 All call buttonUSEDCommercial UsagesSPECIFICATIONS8 paging programmable keys with status and 1 All call buttonBase dimensions (HxWxD): 200 x 107 x 345 mmWeight: Approx.0.55 kgColor: Ral 7035Goose-neck length with mic.: 300 mmCable length: 900 mComes standard with Junction box (JB) and CAT5 cable (1.5 m).PPM Keypad G2 optional Expansion keypad for an additional 8 selection zones

Wallmount monitored paging console

CD8

Wallmount monitored paging console

CD16

DESCRIPTIONThe CD-8 paging console is a remote paging inter-face with Access Level 2 protection in compliance with EN54-16.FEATURESCompatible with DIVA8 and IDA8 PAVA systems, the unit serves up to eight zones individually withan All-Call option. Zone selection buttons and fire-man’s fist microphone are encased in a heavy-duty IP30 wallmount metal box with lockable door.SPECIFICATIONSDC Battery: 18 - 26 VDCFrequency response -3 dB @ 200 to 8kHzTHDL: < 1% @ 1 kHzOutput level: Max 6 dBuNoise gate threshold: -84 dBu – 24 dBuAttack time : 8 msRelease time 100 msOutput impedance 100 OhmsWeight: 3.6kg

DESCRIPTIONWall-mount heavy duty remote paging console with Access level 2 protection to comply with the EN 54-16. Compatible with DIVA8 System and com-municates over a dedicated RS485 for Power, au-dio and DATA.FEATURESThe CD-16 console use the same architecture as the PPM paging console, with a junction box built into the enclosure for daisy-chaining multiple units (note that only the first console in the chain is mon-itored). The maximum recommendeddistance between units is 100m.SPECIFICATIONSDC Battery: 18 - 26 VDCFrequency response -3 dB @ 200 to 8kHzTHDL: < 1% @ 1 kHzOutput level: Max 6 dBuNoise gate threshold: -84 dBu – 24 dBuAttack time : 8 msRelease time 100 msOutput impedance 100 OhmsWeight: 4.7kg

13

DESCRIPTIONThe PH range of lightweight plastic weatherproof re-entrant horns has been designed for high quali-ty sound reinforcement.FEATURESManufactured in a strengthened ABS moulded compound with UVL (ultra violet light) protection and supplied with a high grade stainless steel epoxy coated U bracket.USEDOffering clarity of speech and high efficiency, these horns are suitable for communications or signal warnings.ENVIRONMENTThey are suitable for use indoors and out. In addi-tion they are also ideal for marine and industrial applications as they are unaffected by most chem-icals.SPECIFICATIONSTransformer Impedance, Ohms, 100V: 1k/2k/4k/8kTappings 70.7 volt line, Watts: 5/2.5/1.25/0.625Test Signal Bandwidth 100Hz-10kHz: 97S.P.L. @ Full power Octave Bandwidth, dB: 107Acoustic Power (db-BWL@1watt) 1k/2kHz,: 95/97 Directivity Axial Q factor, 1k/2kHz,: 2.8/6.6Net weight: 1.30Mounting: Stainless Steel U BracketPH10/TC is BS5839 Part 8 Voice Alarm compliant.

DESCRIPTIONThe PH range of lightweight plastic weatherproof re-entrant horns has been designed for high quali-ty sound reinforcement.FEATURESManufactured in a strengthened ABS moulded compound with UVL (ultra violet light) protection and supplied with a high grade stainless steel epoxy coated U bracket.USEDOffering clarity of speech and high efficiency, these horns are suitable for communications or signal warnings.ENVIRONMENTThey are suitable for use indoors and out. In addi-tion they are also ideal for marine and industrial applications as they are unaffected by most chem-icals.SPECIFICATIONSTransformer Impedance, Ohms, 100V: 500/1k/2k/4kTappings 70.7 volt line, Watts: 10/5/2.5/1.25Test Signal Bandwidth 100Hz-10kHz: 101 S.P.L. @ Full power Octave Bandwidth, dB: 114Acoustic Power (db-BWL@1watt) 1k/2kHz, dB: 98/98 Directivity Axial Q factor, 1k/2kHz: 4.9/13.6Net weight, Kgs: 1.7Mounting: Stainless Steel U bracket and hardwarePH20/TC is BS5839 Part 8 Voice Alarm compliant.

DESCRIPTIONThe PH range of lightweight plastic weatherproof re-entrant horns has been designed for high quali-ty sound reinforcementFEATURESManufactured in a strengthened ABS moulded compound with UVL (ultra violet light) protection and supplied with a high grade stainless steel epoxy coated U bracket.USEDOffering clarity of speech and high efficiency, these horns are suitable for communications or signal warnings.ENVIRONMENTThey are suitable for use indoors and out. In addi-tion they are also ideal for marine and industrial applications as they are unaffected by most chem-icals.SPECIFICATIONSTransformer Impedance, Ohms, 100V: 330/660/1.32k/2.64kTappings 70.7 volt line, Watts: 15/7.5/3.75/1.875Test Signal Bandwidth 100Hz-10kHz : 103S.P.L. @ Full power Octave Bandwidth, dB: 118Acoustic Power (db-BWL@1watt) 1k/2kHz, dB: 101/100Directivity Axial Q factor, 1k/2kHz: 6.20/15.1Net weight, Kgs: 2.30Mounting: Stainless Steel U bracket and hardwarePH30/TC is BS5839 Part 8 Voice Alarm compliant.

Penton - Weatherproof Horn Loudspeakers

PH10/TC


PH30/TC


PH20/TC

14

Penton - Weatherproof Music Horn Loudspeakers

MSH60TC

DESCRIPTION The weatherproof plastic horn loudspeaker com-bines a re-entrant horn with a high frequency unit and has been developed for clear speech and qual-ity background music reproduction.FEATURESWide Frequency Response for Voice or Contempo-rary Music. ABS Housing Weather-Sealed for Outdoor Use. USEDThe MSH series has been developed forsituations requiring cost-effectivequality sound at high sound pressurelevels (SPL) in occasional unfriendlyweather conditions.ENVIRONMENT They are suitable for sporting and recreationalareasSPECIFICATIONSTransformer Impedance, Ohms, 100V: 333/667/1.33k/2.66kTappings 70.7 volt line, Watts: 15/7.5/3.75/1.875Driver impedance, Ohms: 8S.P.L. @ Full power Octave Bandwidth, dB: 99Acoustic Power (db-BWL@1watt) 1k/2kHz, dB: 91/94Directivity Q factor, 1k/2kHz: 8.50 / 6.50Net weight, Kgs: 5.5Mounting: Aluminium U bracket

DESCRIPTION The weatherproof plastic horn loudspeaker com-bines a re-entrant horn with a high frequency unit and has been developed for clear speech and qual-ity background music reproduction.FEATURESWide Frequency Response for Voice or Contempo-rary Music. ABS Housing Weather-Sealed for Outdoor Use. USEDThe MSH series has been developed forsituations requiring cost-effectivequality sound at high sound pressurelevels (SPL) in occasional unfriendlyweather conditions.ENVIRONMENT They are suitable for sporting and recreationalareasSPECIFICATIONSTransformer Impedance , Ohms: 167/333/667/1.33KTransformer tappings 100 volt line, Watts 60/ 30/ 15/ 7.5Driver impedance, Ohms: 8S.P.L. ,@ 1m, 1watt, dB: 99S.P.L. ,@Full power/ 1m, dB 119Directivity Q factor, 1k/2kHz: 9.38Net weight, Kgs: 6Mounting: U type aluminium bracket

Penton - Weatherproof Music Horn Loudspeakers

MSH30TC

15

DESCRIPTIONThese units are stylish yet unobtrusive and can be supplied with or without firedomes (FT & FTS ver-sions).FEATURESMade from a pressed steel epoxy coated chassis incorporating a twin cone driver, which has a wider frequency range than the standard single cone.USEDUse in applications where background music is a primary requirement.ENVIRONMENTThe plastiflex treated cone means this loudspeak-er can also be used in humid atmospheres such as bathrooms and clean room areas.SPECIFICATIONSTransformer Impedance, Ohms, 100V: 1.67k/3.33k/6.66k/13.3k/39.9kTappings 70.7 volt line, Watts: 3/1.5/0.75/0.375/0.125Test Signal Bandwidth 100Hz-10kHz: 95S.P.L. @ Full power Octave Bandwidth, dB RCS5/T: 102RCS5/FTS:102Acoustic Power (db-BWL@1watt) 1k/2kHz, dB RCS5/T: 91/92 RCS5/FTS: 92/93Directivity Axial Q factor, 1k/2kHz, RCS5/T: 2.3/4.6 and RCS5/FTS: 2.1/6.0Net weight, Kgs RCS5/T: 1.0 and RCS5/FTS: 1.3Mounting: Torsion SpringsCut-out, mm RCS5/T : Ø160 and RCS5/FTS: Ø164RCS5/FTS is BS5839 Part 8 Voice alarm complaint.

DESCRIPTIONThese units are stylish yet unobtrusive and can be supplied with or without firedomes (FT & FTS ver-sions).FEATURESMade from a pressed steel epoxy coated chassis incorporating a twin cone driver, which has a wider frequency range than the standard single cone.USEDUse in applications where background music is a primary requirement.ENVIRONMENTThe plastiflex treated cone means this loudspeak-er can also be used in humid atmospheres such as bathrooms and clean room areas.SPECIFICATIONSTransformer Impedance, Ohms, 100V: 2.5k/5k/10k/20k/40kTappings 70.7 volt line, Watts: 2/1/0.5/0.25/0.13Test Signal Bandwidth 100Hz-10kHz RCS4/T: 84 and RCS4/FTS: 83S.P.L. @ Full power Octave Bandwidth, dB RCS4/T: 90RCS4/FTS:89Acoustic Power (db-BWL@1watt) 1k/2kHz, dB RCS4/T: 81/83 RCS4/FTS: 81/83Directivity Axial Q factor, 1k/2kHz, RCS4/T: 1.90/2.20 and RCS4/FTS: 1.70/2.20Net weight, Kgs RCS4/T: 0.72 and RCS4/FTS: 0.92Mounting: Fixing Springs x 4 (stainless Steel)Cut-out, mm RCS4/T : Ø119 and RCS4/FTS: Ø119RCS8/FTS is BS5839 Part 8 Voice alarm complaint.

Penton - Round Metal Ceiling LoudspeakerRCS4/T & RCS4/FTS

Penton - Round Ceiling Loudspeakers RCS5/T & RCS5/FTS RCS6/T & RCS6/FTS

16

Penton - Music Cabinet Speakers

JD20T

DESCRIPTIONThis range of stylish Music Cabinet Loudspeakers benefit from a 2-way enclosure, a custom loaded midrange/Bass and a polypropylene coned drive unitFEATURESThese have been paired with a high performance neodymium tweeter to accurately reproduce the high frequencies.USEDBoth drive units are matched with a passive cross-over to ensure a smooth performance over the op-erating bandwidth.ENVIRONMENTDesigned for use in shops, clubs, themed environ-ments, wine bars etc., these units provide a high quality performance from a compact and attractive enclosure.SPECIFICATIONSTappings 100 volt line, Watts: 20/10/5/2.5Driver impedance, Ohms:16SPL @ 1W/M (Test Signal 100Hz - 10kHz): 84Dispersion at 1k/2kHz: 180/100Axial Q Factor at 1k/2kHz: 3.5/7.1

DESCRIPTIONThis range of stylish Music Cabinet Loudspeakers benefit from a 2-way enclosure, a custom loaded midrange/Bass and a polypropylene coned drive unitFEATURESThese have been paired with a high performance neodymium tweeter to accurately reproduce the high frequencies.USEDBoth drive units are matched with a passive cross-over to ensure a smooth performance over the op-erating bandwidth.ENVIRONMENTDesigned for use in shops, clubs, themed environ-ments, wine bars etc., these units provide a high quality performance from a compact and attractive enclosure.SPECIFICATIONSTappings 100 volt line, Watts: 40/20/10/5Transformer Impedance, Ohms, 100V250/500/1k/2kTappings 70.7 volt line, Watts: 20/10/5/2.5Dispersion at 1k/2k Hz, Degrees: 160/100Acoustic Power (dB-PWL@1 Watt) 1k/2kHz, dB: 83/79Directivity Axial Q factor, 1k/2kHz: 4.1/7.7

Penton - Moulded Cabinet Speakers

PBC6TC

Penton - Music Cabinet Speakers

JD40T

DESCRIPTIONThe PBC range of cabinet loudspeakers is a real in-novation in design and performance. These excep-tional loudspeakers are both stylish and elegant and offer a cost effective alternative to the conven-tional wooden cabinet loudspeaker.FEATURESThe PBC 6/T is a 6 watt dual coned loudspeaker complete with line transformerUSEDIdeally suited for high quality speech and back-ground musicENVIRONMENTIdeally suited for high quality speech and back-ground musicSPECIFICATIONSTransformer Impedance, Ohms, 100V: 1.67k/3.33k/6.66k/13.3k/39.9kTappings 70.7 volt line, Watts: 3 / 1.5 / 0.75 / 0.25 / 0.125Test Signal Bandwidth 100Hz-10kHz : 96S.P.L. @ Full power Octave Bandwidth, dB: 104Acoustic Power (db-BWL@1watt) 1k/2kHz, dB: 94 / 95Directivity Axial Q factor, 1k/2kHz: 3.6/5.8Net weight, Kgs: 1.15Mounting: Keyhole and/or screws

18

Fire Compliant Wall Mount Speaker

TF-700

DESCRIPTIONThe TF-700 is a fireproof wall mount speaker with-built-in 70v/100v transformer. The 5inch full range loudspeaker is able to produce a wide frequency response of 100-16KHz. Multi-tapped, the loud-speaker is able to be utlized in both low and high impedance applications. SPECIFICATIONSPower Taps @100V: 0.75W, 1.5W, 3W, 6WPower Taps @70V: 0.37W, 0.75W, 1.5W, 3WImpedance: Com/13.3KΩ/6.7KΩ/3.3KΩ/1.7KΩSPL(1W/1M): 91dB±3 dBMax. SPL (Rated W/1M): 99dBFrequency Response (-10dB): 100-16KHzFinish: Baffle: Steel, White Grille: Steel, WhiteSpeaker Driver: 5” x 1Dimensions: 245 x 212 x 95mmWeight: 1.9KgMounting: Hook Mounting

Fire Compliant Ceiling Speaker

T-105C

Fire Compliant Surface Ceiling Speaker

T-105S

DESCRIPTIONThe T-105C is a fire compliant ceiling speaker with built-in 70v/100v transformer. The built in trans-former, facilitates the use of both 70V and 100V outputs. FEATURES5” fire compliant Ceiling Speaker with Fire Dome, 6WUSEDIndustrial and commercial applicationsENVIRONMENTHotel, school, office and factory where background musicand paging is needed.SPECIFICATIONSPower Taps @100V: 3W, 6WPower Taps @70V :1.5W, 3WImpedance: Com/3.3 KΩ/1.7KΩSPL(1W/1M): 90dBMax. SPL (Rated W/1M): 98dBFrequency Response: (-10dB) 110-18KHzWeight: 0.9KgMounting: Spring-clip

DESCRIPTIONThe T-105S is a surface mount ceiling speaker with built-in 70v/100v transformer. The built in trans-former, facilitates the use of both 70V and 100V outputs. FEATURES5” Surface Mount Ceiling Speaker, 9W, with meta / back can, 100V (Surfacemount)USESIndustrial and commercial applicationsENVIRONMENTHotel, school, office and factory where background musicand paging is needed.SPECIFICATIONSPower Taps @100V: 3W, 6W, 9WPower Taps @70V :1.5W, 3W, 4.5WImpedance: Black: Com Red:3.3KΩ Green:1.7KΩ White:1.1KΩSPL(1W/1M): 94dBMax. SPL (Rated W/1M): 104dBFrequency Response: 110-14500HzWeight: 0.71KgMounting: Screw Fixed

19

Class D - PA AmplifierDPA300Q

DESCRIPTIONQuad 300W Class D Power AmplifierFEATURESHoused in 2 RU compact chassis, these Class D amplifiers offer High power with reduced size and weight. The combi-nation Class D type amplification circuitry combined with SMPS (Switch mode Power Supplies) creates a high effi-ciency amplifier offering reduced power consumption and low heat dissipationUSEDIdeal for applications where high power and large quantity of speakers are requiredENVIRONMENTAirports Arena, shopping malls, transportation stadiums or any large scale facilitiesSPECIFICATIONSRated Output Power: 300W*4Frequency Response: 30Hz ~ 20KHz (-3dB)Output Volt-age / Impedance: 100V/33.3Ω / 70V/16.3ΩInput Sensitivity: 1V / 10kΩ BalanceWeight (SET): 482(W) x 88(H) x 280(D)mm

Fire CompliantCeiling Speaker

T-575

DESCRIPTIONThe T-575 is a fire compliant ceiling speaker with built-in 70v/100v transformer. The built in transformer, facili-tates the use of both 70V and 100V outputs. FEATURES6” +1” Ceiling Speaker with fire dome, 0.38W-0.75W-1.5W-3W-6W, 100V,cutout 207mm, metal baffle, grille and back cover, ce-ramic connector, fire resistant cable, thermal fuse (fire compliant speaker)USESIndustrial and commercial applicationsENVIRONMENTHotel, school, office and factory where background mu-sicand paging is needed.SPECIFICATIONSPower Taps @100V: 0.38W, 0.75W, 1.5W, 3W, 6WPower Taps @70V :0.19W, 0.38W, 0.75W, 1.5W, 3WImpedance: Com/26KΩ/13KΩ/6.7KΩ/3.3KΩ/1.7KΩSPL(1W/1M): 92dBMax. SPL (Rated W/1M): 100dBFrequency Response: 120-18KHzWeight: 1.6kg

20

Class D - PA AmplifierDPA600S

Class D - PA AmplifierDPA600D

DESCRIPTIONSingle Channel 600W Class D Power AmplifierFEATURESRespectively housed in 2 RU compact chassis, these Class D amplifiers offer High power in reduced size and weight. The combination Class D type amplification circuitry com-bined with SMPS (Switch mode Power Supplies) creates a high efficiency amplifier with reduced power consumption and low heat dissipationUSEDIdeal for applications where high power and large quantity of speakers are requiredENVIRONMENTAirports Arena, shopping malls, transportation stadiums or any large scale facilitiesSPECIFICATIONSRated Output Power: 600WFrequency Response: 30Hz ~ 20KHz (-3dB)Output Voltage / Impedance: 100V/16.6Ω / 70V/8.2ΩInput Sensitivity: 1V / 10kΩ BalanceWeight (SET): 482(W) x 88(H) x 280(D)mm

DESCRIPTIONDual Channel 600W Class D Power AmplifierFEATURESHoused in 2 RU compact chassis, these Class D amplifiers offer High power in reduced size and weight. The combi-nation Class D type amplification circuitry combined with SMPS (Switch mode Power Supplies) creates a high effi-ciency amplifier offering reduced power consumption and low heat dissipationUSEDIdeal for applications where high power and large quantity of speakers are requiredENVIRONMENTAirports Arena, shopping malls, transportation stadiums or any large scale facilitiesSPECIFICATIONSRated Output Power: 600W*2Frequency Response: 30Hz ~ 20KHz (-3dB)Output Volt-age / Impedance: 100V/16.6Ω / 70V/8.2ΩInput Sensitivity: 1V / 10kΩ BalanceWeight (SET): 482(W) x 88(H) x 280(D)mm

21

Class D - PA AmplifierDPA900S

DESCRIPTIONSingle Channel 900W Class D Power AmplifierFEATURESHoused in 2 RU compact chassis, these Class D amplifiers offer High power in reduced size and weight. The combi-nation Class D type amplification circuitry combined with SMPS (Switch mode Power Supplies) creates a high efficien-cy amplifier offering reduced power consumption and low heat dissipationUSEDIdeal for applications where high power and large quantity of speakers are requiredENVIRONMENTAirports Arena, shopping malls, transportation stadiums or any large scale facilitiesSPECIFICATIONSRated Output Power: 900WFrequency Response: 30Hz ~ 20KHz (-3dB) Impedance: 70V/5.4ΩInput Sensitivity: 1V / 10kΩ BalanceWeight (SET): 482(W) x 88(H) x 280(D)mm

DESCRIPTIONThese amplifiers are designed to provide high quality audio with substantial power output. FEATURESLine input, link output with XLR jacks.Low impedance(4Ω) and constant voltage(70V, 100V) out-put with EURO block terminal. 120watts(SY-A120) rated power output.USES Amplifier solutions for commercial and industrial applica-tionsSPECIFICATIONSRated Output: 120WattFrequency Response: +1.5 / -3 dB at 70Hz~18kHzGain Control: -12dB ~ 0dBInput Sensitivity: 1.0 ± 0.1Vrms / 10KohmT.H.D at 1/2 rated output, 1kHz: Less than 1.0%Output Voltage and Impedance: 4Ω / 22V, 41Ω / 70V, 83Ω / 100V Net Weight: 11.65kg

Public Address Power Amplifier

SYA 120

22


SYA 240

DESCRIPTIONThese amplifiers are designed to provide high quality audio with substantial power output. FEATURESOne line input and one link output with XLR jacks.Low impedance(4Ω) and constant voltage(70V, 100V) output with EURO block terminal. 240watts(SY-A240) rated power output.USEDAmplifier solutions for commercial and industrial appli-cationsSPECIFICATIONSRated Output: 240WattFrequency Response: +1.5 / -3 dB at 70Hz~18kHzGain Control: -12dB ~ 0dBInput Sensitivity: 1.0 ± 0.1Vrms / 10KohmT.H.D at 1/2 rated output, 1kHz: Less than 1.0%Output Voltage and Impedance: 4Ω / 31V, 21Ω / 70V, 41Ω / 100V Net Weight: 13.87kg

DESCRIPTIONThese amplifiers are designed to provide high quality audio with substantial power output. FEATURESOne line input and one link output with XLR jacks.Low impedance(4Ω) and constant voltage(70V, 100V) out-put with EURO block terminal. 360watts(SY-A360) rat-ed power output.USEDAmplifier solutions for commercial and industrial applica-tionsSPECIFICATIONSRated Output: 360WattFrequency Response: +1.5 / -3 dB at 70Hz~18kHzGain Control: -12dB ~ 0dBInput Sensitivity: 1.0 ± 0.1Vrms / 10KohmT.H.D at 1/2 rated output, 1kHz: Less than 1.0%Output Voltage and Impedance: 4Ω / 38V,13.6Ω / 70V, 27.8Ω / 100V Net Weight: 15.16kg


SYA 360

23

Desktop Mixer Amplifier

T-10AP

DESCRIPTIONWall mount or tabletop designs available. Mic1 in-put 1/4” phone jack, Aux1 inputdual RCA, tel input phoenix connector. Mic with Vox priority and telephone input withsecondary input over all other inputs. 100V and 4-16 ohms speaker outputs. 230V and 12V DC. Mic1, Aux1 and tel volume control andbass/treble tone control. Wall mount bracket avail-able.SPECIFICATIONSRated Power Output: 10W Speaker Outputs: 70V, 100V & 4~16ΩInput Sensitivity & Impedance: MIC1, 2, 3: 5mV/600, MIC1: 2.5mV/2KΩ, TEL: 175mV/10KΩAUX: 350mV/10KΩ , Unbalanced RCA inputOutput Sensitivity & Impedance: LINE OUT: 1V/470 , Unbalanced RCA outputOverload Electromotive Force: MIC 1, 2, 3: >10dB, MIC1: >15dB, AUX: >15dB, Unbalanced RCA input, TEL: >12dBTone: Bass: 10dB, Treble: 10dBFrequency Response: 50Hz~16KHz (+1dB, -3dB)S/N Ratio: MIC: 66dB, AUX: 80dBTHD: Less than 0.3% at 1KHz, 1/3 rated powerMuting Function: MIC 1 overrides other input signals with 30dB attenuationCrosstalk: ≤50dBPhantom Power: +48VCooling: Button-up convert automatic coolProtection: High temp, overload & short-circuitPower Supply: ~110V/60Hz or ~230V/50Hz or DC 24VPower Consumption: 20WWeight: 1.2kgDimensions: 2 0 0 x 1 5 3 x 4 4 m mFinish: Panel: aluminum plate, black Case: steel plate, black

Desktop Mixer Amplifier

T-40AP

DESCRIPTIONMic1 input 1/4” phone jack and XLR with phantom power, Mic2 by 1/4” phone jack, Aux1 input dual RCA, tel input phoenix connector. 100V, 70V and 4-16 ohms speaker output. . Mic1-2, Aux1, tel, master volume control and bass/treble tone control. High temp, short circuit and over load protection.SPECIFICATIONSRated Power Output: 40W Speaker Outputs: 70V, 100V & 4~16ΩInput Sensitivity & Impedance: MIC1, 2, 3: 5mV/600, MIC1: 2.5mV/2KΩ, TEL: 175mV/10KΩAUX: 350mV/10KΩ , Unbalanced RCA inputOutput Sensitivity & Impedance: LINE OUT: 1V/470 , Unbalanced RCA outputOverload Electromotive Force: MIC 1, 2, 3: >10dB, MIC1: >15dB, AUX: >15dB, Unbalanced RCA input, TEL: >12dBTone: Bass: 10dB, Treble: 10dBFrequency Response: 50Hz~16KHz (+1dB, -3dB)S/N Ratio: MIC: 66dB, AUX: 80dBTHD: Less than 0.3% at 1KHz, 1/3 rated powerMuting Function: MIC 1 30dB Mute OverruleCrosstalk: ≤50dBPhantom Power: +48VCooling: Button-up convert automatic coolProtection: High temp, overload & short-circuitPower Supply: ~110V/60Hz or ~230V/50Hz or DC 24VPower Consumption: 70WWeight: 3kgDimensions: 360 x 274 x 66mmFinish: Panel: aluminum plate, black Case: steel plate, black

Mixer Amplifier (XLR Balance MIC Input + Phantom Power)

T-60B

DESCRIPTIONThe basic public address mixer amplifiers power ratings are from 60W, 120W, 240W, 350W,500W. They feature 3 balanced microphone inputs, 2 aux and 1 EMC input. Priority muting via EMC for overriding facility. Individual gain controls are pro-vided for Mic 1-3 and Aux 1-2, bass and treble con-trols and master volume control are provided for overall tone control. 70V, 100V and lowimpedance 4-16ohms speaker outputs are provid-ed. Short-circuit and high temp overload protection. SPECIFICATIONSRated Power Output: 60W Speaker Outputs: 70V, 100V & 4~16ΩInput Sensitivity & Impedance: MIC 1, 2, 3: 5mV/600Ω , Unbalanced phone jack inputMIC 2, 3: ±2.5mV/2KΩ , balanced XLR inputMIC 2, 3: 775mV/10KΩ , Unbalanced RCA inputAUX 1, 2: 350mV/10KΩ , Unbalanced RCA inputEMC: 775mV/10KΩ , Unbalanced RCA inputOutput Sensitivity & Impedance: MIX OUT: 1V/470Ω , Unbalanced RCA outputTone: Bass: ±10dB at 100Hz, Treble: ±10dB at 10KH THD: Less than 0.5% at 1KHz, 1/3 rated powerMuting Function: MIC 1 Gain Control: ±2.5mV~ 75mV at 30dBCrosstalk: ≤50dBPhantom Power: +48V, with LED indicatorCooling: Fan automatically start up when temp reaches 55 degreesProtection: High temp, overload & short-circuitPower Supply: ~110V/60Hz or ~230V/50Hz or DC 24V Power Consumption: 100WWeight: 7.3kgDimension: 484 x 335 x 88mmFinish: Panel: aluminum plate, blackCase: steel plate, black

24

Mixer Amplifier (XLR Balance Mic Input + Phantom Power)

T-120B

DESCRIPTIONThe basic public address mixer amplifiers power ratings are from 60W, 120W, 240W, 350W,500W to 650W. 3 balanced microphone inputs, 2 aux inputs and 1 EMCinput. Priority muting. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control for over-all tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Short-cir-cuit, overload and high temp protection.SPECIFICATIONSRated Power Output: 120W Speaker Outputs: 70V, 100V & 4~16ΩInput Sensitivity & Impedance: MIC 1, 2, 3: 5mV/600Ω , Unbalanced phone jack inputMIC 2, 3: ±2.5mV/2KΩ , balanced XLR inputMIC 2, 3: 775mV/10KΩ , Unbalanced RCA inputAUX 1, 2: 350mV/10KΩ , Unbalanced RCA inputEMC: 775mV/10KΩ , Unbalanced RCA inputOutput Sensitivity & Impedance: MIX OUT: 1V/470Ω , Unbalanced RCA outputTone: Bass: ±10dB at 100Hz, Treble: ±10dB at 10KH THD: Less than 0.5% at 1KHz, 1/3 rated powerGain Control: ±2.5mV~ 75mV at 30dBCrosstalk: ≤50dBPhantom Power: +48V, with LED indicatorCooling: Fan automatically start up when temp reaches 55 degreesProtection: High temp, overload & short-circuitPower Supply: ~110V/60Hz or ~230V/50Hz or DC 24V Power Consumption: 200WWeight: 9.5kgDimension: 484 x 335 x 88mmFinish: Panel: aluminum plate, blackCase: steel plate, black

Mixer Amplifier (XLR Balance Mic Input + Phantom Power)

T-240B

DESCRIPTIONThe basic public address mixer amplifiers power ratings are from 60W, 120W, 240W, 350W,500W to 650W. They are featured of 3 balanced microphone inputs, 2 aux inputs and 1 EMCinput. Priority muting achieved via EMC for overrid-ing other inputs except Mic1 on frontpanel. Individual gain controls for Mic 1-3 and Aux 1-2, bass, treble and master volume control. 70V, 100V and low impedance 4-16ohms speaker out-puts Short-circuit, overload and high temp protec-tion.SPECIFICATIONSRated Power Output: 240W Speaker Outputs: 70V, 100V & 4~16ΩInput Sensitivity & Impedance: MIC 1, 2, 3: 5mV/600Ω , Unbalanced phone jack inputMIC 2, 3: ±2.5mV/2KΩ , balanced XLR inputMIC 2, 3: 775mV/10KΩ , Unbalanced RCA inputAUX 1, 2: 350mV/10KΩ , Unbalanced RCA inputEMC: 775mV/10KΩ , Unbalanced RCA inputOutput Sensitivity & Impedance: MIX OUT: 1V/470Ω , Unbalanced RCA outputTone: Bass: ±10dB at 100Hz, Treble: ±10dB at 10KH THD: Less than 0.5% at 1KHz, 1/3 rated powerGain Control: ±2.5mV~ 75mV at 30dBCrosstalk: ≤50dBPhantom Power: +48V, with LED indicatorCooling: Fan automatically start up when temp reaches 55 degreesProtection: High temp, overload & short-circuitPower Supply: ~110V/60Hz or ~230V/50Hz or DC 24V Power Consumption: 400WWeight:16.8kgDimension: 484 x 385 x 88mmFinish: Panel: aluminum plate, blackCase: steel plate, black

USB Mixer Amplifier (XLR Mic Input with Phantom Power)

T-350B

DESCRIPTIONThe basic public address mixer amplifiers power ratings are from 60W, 120W, 240W, 350W,500W to 650W. 3 balanced microphone inputs, 2 aux inputs and 1 EMC input. Priority muting is achieved via EMC for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Short-circuit, overload and high temp protection. SPECIFICATIONSRated Power Output: 350W Speaker Outputs: 70V, 100V & 4~16ΩInput Sensitivity & Impedance: MIC 1, 2, 3: 5mV/600Ω , Unbalanced phone jack inputMIC 2, 3: ±2.5mV/2KΩ , balanced XLR inputMIC 2, 3: 775mV/10KΩ , Unbalanced RCA inputAUX 1, 2: 350mV/10KΩ , Unbalanced RCA inputEMC: 775mV/10KΩ , Unbalanced RCA inputOutput Sensitivity & Impedance: MIX OUT: 1V/470Ω , Unbalanced RCA outputTone: Bass: ±10dB at 100Hz, Treble: ±10dB at 10KH THD: Less than 0.5% at 1KHz, 1/3 rated powerGain Control: ±2.5mV~ 75mV at 30dBCrosstalk: ≤50dBPhantom Power: +48V, with LED indicatorCooling: Fan automatically start up when temp reaches 55 degreesProtection: High temp, overload & short-circuitPower Supply: ~110V/60Hz or ~230V/50Hz or DC 24V Power Consumption: 500WWeight: 18.7kgDimension: 484 x 335 x 132mmFinish: Panel: aluminum plate, blackCase: steel plate, black

25


T-350B

USB Mixer Amplifier (XLR MIic Input with Phantom Power)

T-120BU


T-60BU

DESCRIPTIONMicrophone inputs, two aux inputs and one EMC input.Priority muting via EMC input for overriding other inputs except Mic1 on front panel. Individual gain controls for Mic 1-3 and Aux 1-2, bass and tre-ble controls and master volume. 70V, 100V and low impedance 4-16ohms speaker outputs. Short-cir-cuit, overload and high temp protection.SPECIFICATIONSRated Power Output: 60W Speaker Outputs: 70V, 100V & 4~16ΩInput Sensitivity & Impedance: MIC 1, 2, 3: 5mV/600Ω , Unbalanced phone jack inputMIC 2, 3: ±2.5mV/2KΩ , balanced XLR inputMIC 2, 3: 775mV/10KΩ , Unbalanced RCA inputAUX 1, 2: 350mV/10KΩ , Unbalanced RCA inputEMC: 775mV/10KΩ , Unbalanced RCA inputOutput Sensitivity & Impedance: MIX OUT: 1V/470Ω , Unbalanced RCA outputTone: Bass: ±10dB at 100Hz, Treble: ±10dB at 10KH S.N Ratio: 50Hz~16KHz (+1sB, -3dB)THD: Less than 0.1% at 1KHz, 1/3 rated powerMuting Function: MIC 1 overrides other input signals with 0-30dB attenuationGain Control: MIC 2, 3 XLR, ±2.5mV~±75mV at 30dBMP3 Support Format: MP3Crosstalk: ≤50dBPhantom Power: +48V, with LED indicatorCooling: Fan automatically start up when temp reaches 55 degreesProtection: High temp, overload & short-circuitPower Supply: ~110V/60Hz or ~230V/50Hz Power Consumption: 100WWeight: 7.2kgDimension: 484 x 303 x 88mmFinish: Panel: aluminum plate, blackCase: steel plate, black

DESCRIPTION3 Microphone inputs, two aux inputs and one EMC input.Priority muting via EMC input for overriding other inputs except Mic1 on front panel. Individu-al gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control. 70V, 100V and low impedance 4-16ohms speaker outputs. Short-circuit, overload and high temp protection. SPECIFICATIONSRated Power Output: 120W Speaker Outputs: 70V, 100V & 4~16ΩInput Sensitivity & Impedance: MIC 1, 2, 3: 5mV/600Ω , Unbalanced phone jack inputMIC 2, 3: ±2.5mV/2KΩ , balanced XLR inputMIC 2, 3: 775mV/10KΩ , Unbalanced RCA inputAUX 1, 2: 350mV/10KΩ , Unbalanced RCA inputEMC: 775mV/10KΩ , Unbalanced RCA inputOutput Sensitivity & Impedance: MIX OUT: 1V/470Ω , Unbalanced RCA outputTone: Bass: ±10dB at 100Hz, Treble: ±10dB at 10KH S.N Ratio: 50Hz~16KHz (+1sB, -3dB)THD: Less than 0.1% at 1KHz, 1/3 rated powerMuting Function: MIC 1 overrides other input signals with 0-30dB attenuationGain Control: MIC 2, 3 XLR, ±2.5mV~±75mV at 30dBMP3 Support Format: MP3Crosstalk: ≤50dBPhantom Power: +48V, with LED indicatorCooling: Fan automatically start up when temp reaches 55 degreesProtection: High temp, overload & short-circuitPower Supply: ~110V/60Hz or ~230V/50Hz Power Consumption: 200WWeight: 10 kgDimension: 484 x 303 x 88mmFinish: Panel: aluminum plate, blackCase: steel plate, black

2 Channel Power Amplifier

T-2S240

DESCRIPTIONThe 2 channel power amplifiers are designed for commercial and industrial public addressapplications. Two separate amplifiers in a single chassis and rated power ranging from60W, 120W, 240W, 350W to 500W per channel. The amplifier is designed to be rack mounted T-2S60/T-2S120, 2U height while T-2S240/T-2S350/T-2S500, 3U height.SPECIFICATIONSRated Power Output: 2x240W Speaker Outputs: 70V, 100V & 4~16ΩInput Sensitivity & Impedance: ±385mV/20KΩ, Balanced XLR InputOutput Sensitivity & Impedance:±385mvV/470Ω, Balanced XLR outputOverload Electromotive Force: >15dB Frequency Response: 50Hz~16KHz(+1dB, -3dB) S/N Ratio: >90dB THD: Less than 0.1% at 1KHz, 1/3 rated power Crosstalk: <50dB Cooling: Fan automatic start up when temp reach-es 55 degreesProtection: Over heat, over load, clip & short circuit Power Supply: ~110V/60Hz or ~230V/50Hz or DC 24VPower Consumption: 720WWeight: 11.3 Kg Dimensions: 484x359x132mm Finish: Panel: aluminum plate, blackCase: Steel plate, black

26

Tuner AmplifierT-120T

DESCRIPTIONThe mixer amplifier with AM/FM tuner 30W, 60W to 120W, power ratings available. Its design is suitable for both tabletop and rack mount.Two XLR Mic inputs phoenix conntectors, VOX level mic 1, AUX inputs faciliteits cascading of additional source. PRe out and Amp facilities signal process-ing. SPECIFICATIONSRated Power Output: 120W Power Consumption: 200WSpeaker Outputs: 70V, 100V & 4~16ΩFrequency Response: 50Hz~16KHz (±3dB) MIC 1-2 Input: Phoenix type: 2mV/10KΩ, XLR type, balanced, 2mV/600ΩAux Input: 150mV/10KΩTel Input: 1V/10KΩAmp Input: 0.775V/600ΩLine Input/ Impedance: 1V/600ΩMusic on hold/Impedance: 0.775V/600ΩTuning : FM: 87.5-108.0MHz, AM: 522-1620KHz Antenna Input: FM: 75ΩUnbal, AM: Low impedance round ring antenna Sensitivity: FM: ≤10uA, AM: ≤100uA Total Distortion: ≤0.1% at 1KHz, 1/3 rated power Power Supply: ~110V/60Hz or ~230V/50HzDimensions: 484x303x88mmNett Weight: 15kg

Stereo Mixer Pre-Amplifier

T-2S02

DESCRIPTION2 balanced mic inputs XLR type, phantom power & gain control is separately provided 4 unbalanced line inputs by XLR type, gain control individually. Stereo balanced XLR outputs. SPECIFICATIONSInput: MIC 1-2: 4 mV -45 mV /600Ω, balanced MIC 1-2(LINE): 150mV-1.5V/10KΩ, balanced LINE 1, 2, 3, 4: 250 mV -2.5V/10KΩ, unbalancedOutput: 1V/600ΩFrequency Response: 20Hz-20KHz(±1dB)S/N Ratio: Mic input: 65dB; Line input: 85dBTone: Bass: ±10dB at 100Hz, Treble: ±10dB at 10KHzPhantom Power: +48VProtection: AC fusePower Supply: 115V and 230V voltage selectorDimensions: 484x209x44mmWeight: 3.9Kg

CD/MP3 Player with TunerT-2221

DESCRIPTION1U height and both tabletop & rack mount. Built-in CD player, MP3, tuner & remote control USB & SD inputs on front panel for MP3 playerSPECIFICATIONSFrequency Response: 20Hz~20KHz(-2dB). THD: ≤0.1%Channel Separation: 65dB Dynamic Range: 75dBS/N Ratio: 85dBAudio Output: 0.775V/600Ω TUNERTunning: FM: 87.5-108.0MHz, AM: 522-1620KHzAntenna Input: FM: 75ΩUnbal, AM: Low impedance round ring antenna Sensitivity: FM: ≤10uA, AM:≤100uABand Memory: 99Audio Output: 0.775V/600ΩPower Supply: ~110V/60Hz or ~230V/50HzDimensions: 484x209x44mmNet Weight: 3.7Kg

27

Ceiling SpeakerT-206P

DESCRIPTIONThe T-206P is a ceiling speaker built-in 70v/100v transformer. The 70v/100v transformer technique reduces line losses on longer distance and allows easy parallel connection of multiple loudspeakers. FEATURESBuilt-in 100v/70v transformerIn-ceiling type loudspeaker5” +1.5” coaxial speaker unitPower output 3.75W, 7.5W, 15W & 30W @100VBuilt-in crossover for hi-fi useLine input: 100V, 70V or 8ΩMetal grille, ABS baffle & ABS back coverPaint in white colorSecure flush mount installation

SPECIFICATIONSPower Taps @100V3.75W, 7.5W, 15W, 30WPower Taps @70V1.9W, 3.75W, 7.5W, 15W, 30WTransformer ImpedanceBlack: Com Red: 2.7KΩ/1.3KΩ/ 670Ω/330Ω/165ΩInput70V/100V/8ΩSPL(1W/1M)89dBMax. SPL (Rated W/1M)106dBFrequency Response (-10dB)100-18KHzFinishBaffle: ABS, White Grille: Steel, WhiteSpeaker Driver5” x 1 1.5” x 1Cutout Size210mmDimensions240 x 155mmWeight2.1KgMountingFlush-mount dog ears

29

POWER AMPLIFIERR150 + R300 + R500 +

R150PLUSTWO-CHANNEL POWER AMPLIFIERS

The R Plus series are a compact (2U) convec-tion-cooled design with turn-on delay and protec-tion circuits. They have front-panel mounted mains switch, level controls and indicators for power, protection, clip and signal present. Separate bal-anced 3-pin XLR and 6.35mm jack connectors are mounted on the rear panel, together with Speakon and binding-post output connectors and a mono bridge switch. Mains inlet is via an IEC connector.

QD4240

The QD-4240 is a quad, four channel power amplifier amplifiers capable of driving 4Ω loads. Their clean sound quality makes them ideal for permanent installation in professional PA systems or for portable use for live performances.

MA-106A

60W Compact SMPS PA Mixer Amplifier with Euro Block Terminal for easy installation Main AMP and Additional Built-in 1W Amp for Monitor Output Without input Signal for 25 Min, Automatically Converted to Master System Standby Mode

R300PLUS TWO-CHANNEL POWER AMPLIFIERS

The R Plus series are a compact (2U) convec-tion-cooled design with turn-on delay and protec-tion circuits. They have front-panel mounted mains switch, level controls and indicators for power, protection, clip and signal present. Separate bal-anced 3-pin XLR and 6.35mm jack connectors are mounted on the rear panel, together with Speakon and binding-post output connectors and a mono bridge switch. Mains inlet is via an IEC connector

QD4480

The QD-4480 is a quad, four channel power amplifier amplifiers capable of driving 4Ω loads. Their clean sound quality makes them ideal for permanent installation in professional PA systems or for portable use for live performances

MA-212U

The MA-212U is a 6-Input 60/120/240-watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files. The MA-U series offers input flexibility with its 6 flexible microphone and line level selectable inputs

R-500PLUSChannel Stereo Power Amplifier

The R-500 PLUS is dual-channel high-perfor-mance amplifiers. Their clear, open sound and quiet operation make them ideal for reference systems and church sound applications.

QD4960

The QD-4960 is a quad, four channel power amplifier amplifiers capable of driving 4Ω loads. Their clean sound quality makes them ideal for permanent installation in professional PA systems or for portable use for live performances.

DPA-430H

DPA-430H is a quad channel 300W amplifi-er70/100v capable of delivering a total 1200 watts of Power respectively housed in 1 RU compact chassis.

QUAD CHANNEL AMPLIFIER

PUBLIC ADDRESS AMPLIFIER

QD4240

MA-106A

QD4480

MA-212U

QD4960

DPA-430H

30

AMPLIFIER

A-60 A-120 ACR-120M

A-60Commercial Amp Mixer

The A-60 is a simple and economical multi-purpose desk top mixer-amplifier providing a cost-effective solution to public address and similar application

A-120COMMERCIAL AMP MIXR

The A-120 is a simple and economical multi-pur-pose desk top mixer-amplifier providing a cost-ef-fective solution to public address and similar application

ACR-120M

Mixer/Amplifier/Receiver with CDP/Tune

PA-1000B

The PA-1000B is a 30W public address mixer/amplifier with two balanced low-impedance (or unbalanced high impedance) mic inputs, allowing connections of two dynamic microphones. Input three is for connection of any line level source

PA-4000A

The Inter-M PA-4000A is an integrated 120 watt mixer amplifier. It is a complete and economical multi-purpose desk top mixer-amplifier providing a cost-effective solution to public address and similar applications

PA-2000A

The Inter-M PA-2000A is an integrated 60 watt mixer amplifier. It is a complete and economical multi-purpose desk top mixer-amplifier providing a cost-effective solution to public address and similar applications.

PA-935N

Public Address Amplifier, PA-935N

PA-6000A

The Inter-M PA-6000A is an integrated 240 watt mixer amplifier. It is a complete and economical multi-purpose desk top mixer-amplifier providing a cost-effective solution to public address and similar applications.

PA-1000B

PA-4000A

PA-1000BR

PA-6000A

PA-2000A

PA-935N

PA-1000BR

The PA-1000BR is a 35 watt mixer/amplifier with two balanced LOW or HI impedance (unbalanced) mic inputs and a built-in AM/FM Tuner with Music-On-Hold output and telephone paging input.

31

PAM-120A/340A/480A

PAM-340A / 480A is a high output P.A amplifier that power output terminal is designed with transless method, so it makes high quality sound and features optional tuner, CD, wireless mic, etc available together.

PAM-510/520

PAM-510 / 520 is a P.A amplifier which is possible to control the output each speaker zone using an Attenuator. It is possible to be announced in se-lected zones or all zones using 5 speaker selection switches and one ALL switch

POWER AMPLIFIER

PAM-120A/340A/480A PAM 510 / 520

CH-522 Clear Horn Speaker

CD-6606 CD Changer

CS-810/CS-820/CS-840Column Speakers

PA-2312Dual Channel Power Amplifier

CS-920 / CS-940Column Speakers

PA-9312 / 9324 / 9336Public Address Power Amplifier

SPEAKERS

CH-522

CD-660

CS-810/CS-820/CS-840

PA-2312

CS-920 / CS-940

PA-9312 / 9324 / 9336

32

PA-9348Power Amplifier

PT-9107SDStereo Tuner

RM-01The RM-01 is an ideal remote paging microphone with push-to-talk and push-to-chime control. It features a unidirectional dynamic microphone with a 14” gooseneck

RM-05AThe RM-05A operates exclusively with the PAM-340A/480A and PCT-610/620 amplifiers and pro-vides the facility of a simple ‘one cable’ multi-zone solution. The paging unit also includes output level LED VU metre, gain/level control and chime facility. Power is provided by the host amplifier.

AMPLIFIER

PA-9348 PCT-620 PP-9214

PCT-620Public Address Amplifier

TU-610Stereo Tuner

PP-9214Mixer/Pre-Amplifier

PT-9107SD

RM-01 RM-05

TU-610

PAGING

TUNERS

34

BLU-320I/O Expander with BLU link and CobraNet™

BLU-805Signal Processor with BLU link and AVB

BLU-806Signal Processor with BLU link and Dante™

BLU-800Signal Processor with BLU link and CobraNet™

CHASSIS

BLU 120

BLU 326

BLU 320

BLU 805

BLU 160

BLU 325

BLU 806

BLU 800

BLU-120I/O Expander with BLU link

BLU-160Signal Processor with BLU link

BLU-326I/O Expander with BLU link and Dante™

BLU-325I/O Expander with BLU link and AVB

35

BLU-BIB(Break-In Box) Input Expander

BLU-504x4 Signal Processor with BLU link

BLU-101Conferencing Processor with AEC

BLU-BOB2(Break-Out Box) Output Expander

BLU-102Conferencing Processor with AEC and Telephone Hybrid

BLU-10012x8 Signal Processor with BLU link

BLU-103Conferencing Processor with AEC and VoIP

BLU-BOB1(Break-Out Box) Output Expander

Fixed I/O Devices

Break-In / Break-Out Boxes

BLU 50

BLU 101

BLU 103

BLU-BOB2

BLU-BIB

BLU 102

BLU 100

BLU-BOB1

36

BLU-10BLK BLU 10WHT

BLU-10BLKProgrammable ControllerThe Soundweb London equivalent, the BLU-10, builds on that power and reputation by adding touch-screen control to make a more attractive and potentially cost-saving control solution

BLU-SIBLU link card for Soundcraft Si Series

PIP-BLUProgrammable Input Processor

BLU-GPXGeneral Purpose I/O Expander

MC-1Fiber Optic Media Converter

BLU - 10WHTProgrammable ControllerThe Soundweb London equivalent, the BLU-10, builds on that power and reputation by adding touch-screen control to make a more attractive and potentially cost-saving control solution

BLU-SI

PIP-BLU

BLU GPX

MC-1 BLU-HIF

BLU-HIFFiber Optic Media Converter

37

Input/Output CardsTelephone Hybrid

Card AEC CARD

Telephone Hybrid Card

Digital Output CardAES/EBU, S/PDIF Outputs plus Wordclock

Analog Output CardLine Outputs

Digital Input CardAES/EBU, S/PDIF Inputs

Analog Input CardMic/Line Inputs

AEC CARD

DIGITAL OUTPUT CARD

ANALOG OUTPUT CARD

DIGITAL INPUT CARD

ANALOG INPUT CARD

38

BLU-DAN

BSS BLU-DANDante to BLU link Bridge

The Soundweb London BLU-DAN offers Dante audio and BLU link. This means that the BLU-DAN can be used to ‘add’ Dante to one or more BLU link devices.

40

XLi SERIES

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series arepowerful, rugged and reliable. They are well suited for musicians, DJs, and entertainers as well as houses of worship, discos, or pubs. The four models in the series are the XLi800, XLi1500, XLi2500 and XLi- 3500. They are identical except for output power. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protec-tion against shorts, no-load, on/off thumps and radio-frequency interference. With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value.

XLI SERIES

XLS SERIES

THE XLS Series of power amplifiers from Crown define the standard for live sound systems with unmatched performance, technology, and affordability.This high-performance line consists of four models, each providing enormous power and flexibility thanks to the integrated PureBand™ Crossover System and Peakx™ Limiters. And weighing in at only 11 lbs or less, they provide the ultimate in lightweight portability. Generating chest-thumping lows and crystal clear highs, the four models in the series – the XLS 1000, XLS 1500, XLS 2000, and XLS 2500 – are engineered to meet any demanding audio requirements –reliably and within budget. Every XLS Series amplifier is backed by Crown’s unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the Crown XLS Series.

They are a powerful argument for performance, flexibility, and value!

XLS SERIES

41

XTI 2 SERIES

XTi 2 SERIES

There’s no debate – when you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. That’s because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night withoutbreaking a sweat.With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility.

ComTech DriveCore™

ComTech DriveCore™ is ideal for installations that require premium sound quality, multi-channel configurations, compact dimensions, and quite often zero ambient fan noise. Typical applications include boardrooms, video and teleconferencing, VIP suites in stadiums and arenas, and upscale restaurants and retail outlets to name just a few. Representing next generation technology available today, the ComTech DriveCore™ proves without a doubt that big things really do come in small packages

COMTECH / DRIVECORE

42

DRIVECORE INSTALL

DriveCore™ Install

DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore™ technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

CDi SERIES

CDi Series

Crown CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000. All are rugged and lightweight, and offer unmatched value in their class.

43

CTS SERIES

CTS SERIES

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent se-lection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

XLS DriveCore™ 2 Series

XLS Drivecore 2 Series

The next generation of XLS got a makeover with a sleek new look, larger LCD display, and more DSP with extended functionality. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistortedsignal straight to your speakers.

44

XLC Series

XLC Series

Available in two models, the XLC2500 and XLC2800 incorporate Crown’s proprietary DriveCore™ Technology, which significantly reduces the amplifiers’ size, while yielding much more energy efficient operation – without sacrificing performance. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets.

46

DIGITAL ZONE PROCESSORS

With 12 inputs and 6 outputs and Ethernet control the dbx ZonePRO® 1260 is the newest members of the ZonePRO® family providing a complete suite of signal processing and control for Commercial Audio applications.

With 12 inputs and 6 outputs and Ethernet control the dbx ZonePRO® 1261 is the newest members of the ZonePRO® family providing a complete suite of signal processing and control for Commercial Audio applications

The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

Zone Pro 1260 Zone Pro 1260M



With 6 inputs and 4 outputs the dbx Zone-PRO® 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio application


With 6 inputs and 4 outputs the dbx Zo-nePRO® 641 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications

Zone Pro 1261M

Zone Pro 640M

Zone Pro 640

Zone Pro 641M

Zone Pro 641

47

ZC CONTROLLERS

Wall-Mounted Break out Box ZonePRO Fire Safety Interface Wall-Mounted Zone Controller

ZC - BOB ZC - FIRE ZC1

The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and ZonePRO products.

The ZC-6 is a program-mable volume control for ZonePRO devices

The ZC-3 can function as a program selec-tor for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePRO products.

The ZC-7 is a programmable push -to-talk page assignment controller for the ZonePRO devices.

The ZC-4 provides program change capa-bility from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for ZonePRO devices

The ZC-8 provides both programmable source selection and volume control to ZonePRO devices.

ZC9Wall-Mounted Zone Controller

ZC2

ZC6

ZC3

ZC7

ZC4

ZC8 ZC9

48

DIGITAL SIGNAL PROCESSORS

AFS224 - Advanced Feedback Suppression

The AFS 224 Advanced Feedback Suppression processor was designed to provide state-of-the art feedback elimination processing, while maintaining a simple and intuitive control interface. From the powerful DSP module to the no-nonsense user interface, the AFS 224 provides all the processing and control necessary for both installation and live use. The AFS 224 is an absolute must for any live sound application.

Complete Loudspeaker Management System

• dbx Compression• AFS™ (Advanced Feedback Suppression)• 31-Band Graphic EQ• 12-Band Parametric EQ (with narrow notch capabilities)• Subharmonic Synthesis• Backline Delay• Noise Gate

Complete Loudspeaker Management System With BLU Link Complete Loudspeaker Management System With DANTE

DRIVERACK SERIES

49

CT2Cable Tester

The CT2 offers many common connectors such as Speaker twist, XLR, Phono, BNC, DIN, TRS, TS, DMX, and Banana.

6 Position rotary selector with individual LED’s for up to five pins plus internal battery life check

DI1Active Direct Box

The DI1, active direct box, features a rugged construction, 20dB and 40dB attenuation, phantom or battery operation, ground lift, and XLR output. With its quality construction, and extraordinary audio performance, the DI1 is a necessary component in many applica-tions.

CT3Cable Tester

The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, and

Banana.

• 8-position automatic indication cable tester

• 2 piece chassis for testing installed cables

DJDI2-Channel Passive Direct Box

The DJDI is an indispensable tool for interfacing between various pieces of audio equipment in many applications. It enables the con-nection of any unbalanced audio line level signal from electric in-struments, DJ mixers, guitars, etc. to be converted to a balanced signal in stereo.

ACCESSORIES

CT2

DI1

CT3

DJDI

voice evacuation

Documents