VoiceLift Pro Microphone EBHIGH PERFORMANCE WIRELESS MICROPHONE

SYSTEM WITH eBUS

The VoiceLift® Pro Microphone EB system integrates

with eBUS® enabled control systems to provide voice

amplification for a wide variety of installations. The

VoiceLift receiver connects to the eBUS port on an

Extron IPCP Pro Series control processor for power

and customizable control. State-of-the-art wireless

technology for voice amplification utilizes digital

transmission and pairing in a dedicated spectrum to

provide superior performance over traditional systems.

VoiceLift Pro EB integrates seamlessly with IPCP

control processors and an audio power amplifier to

provide a complete voice amplification solution.

A Integration with Extron control systems provides flexible monitoring and control capabilities.

A Pendant microphone buttons can trigger events such as an instant alert or start/stop recordings on an SMP Series streaming media processor to support lecture capture installations.

A Advanced RF wireless technology provides superior sound quality, increased reliability, greater range, and reduced interference over traditional systems

A DSP maximizes sound quality and intelligibility

A Connects to the eBUS port on an Extron IPCP Pro control processor using a single cable that carries both power and control communication

A Supports up to two microphones for each receiver

A High capacity rechargeable batteries allow for over 8 hours of talk time

MICROPHONE

DESCRIPTIONDESCRIPTION

VLR 302EB

VLH 302

VLC 302

VLP 302

VLR 302EBeBUS

COMERRORIDERROR

LINK

R 1

2

LINK

VLR 302EB

PWR LOAD= 4.0W

eBUS BUS ID AUDIOOUT

654321

ON E+V +S -S G

POWER

Front

Front

Front

Front Left

Top

Rear

VoiceLift Pro Microphone EB

System PackagesThe VLME 3001 system includes one pendant microphone, receiver, and charging station.

The VLME 3002 system includes two pendant microphones, receiver, and charging station.

The VLME 3002H system includes one pendant microphone, receiver, charging station, and one handheld microphone.

VoiceLift Pro Microphone EB System Core ComponentsVLP 302 VoiceLift Pro Pendant Microphone

VLR 302 EB eBUS VoiceLift Pro Receiver

VLC 302 VoiceLift Pro Charging Station

VLH 302 VoiceLift Pro Handheld Microphone

PANEL DRAWINGS

Advanced Wireless TechnologyThe VoiceLift Pro Microphone is based on an industry standard radio frequency technology operating in a spectrum reserved exclusively for voice communications. This technology is not susceptible to environmental factors, such as windows, sunlight, and fluorescent lighting, that create problems for infrared systems. It also does not suffer from the licensing restrictions and proximity issues of traditional RF microphones.

eBUS IntegrationThe VoiceLift Pro Receiver includes an eBUS port for power and communication from an IPCP control processor to enable quick and easy integration of Instant Alert, lecture capture, podcast recording, or other applications.

Customizable Control An independent Function Button available on the pendant microphone can be customized to instruct the IPCP control processor to start/stop recording. Holding both volume buttons discreetly sends out a message to the control processor, which can be configured to initiate an Instant Alert via e-mail or text message, notifying administration and authorities in the event of an incident.

Reduced InterferenceVoiceLift Pro operates on a frequency that is separate from WiFi, Bluetooth, and those used by interactive whiteboards and projectors, so it won’t interfere with, or be affected by other wireless systems.

Increased RangeVoiceLift Pro technology operates at distances of up to two times farther than infrared and with greater reliability. VoiceLift Pro transmission technology does not require line of sight, increasing flexibility in how the pendant microphone is worn as well as the room environments in which it may be used.

Pairing BenefitsThe VoiceLift Pro Microphone uses pairing technology to establish an exclusive relationship between the microphones and the receiver, preventing interference between microphones in adjacent rooms.

Sophisticated Signal ProcessingVoiceLift Pro uses advanced digital signal processing to optimize voice intelligibility and audio quality.

Pendant MicrophoneThe VoiceLift Pro Pendant microphone can be worn around the neck on a lanyard or attached to clothing as a bodypack when used with a lavalier or headset microphone. VoiceLift Pro transmission technology does not require line of sight, increasing flexibility in how and where the pendant is worn.

Multiple Microphone SupportVoiceLift Pro supports up to two microphones per receiver, enabling team presentation and audience participation.

APPLICATION DIAGRAM

MODEL 80

FLAT PANEL

WiF

i1

23

4

ShareLink Pro 1000

HD WINSTANDBYSCREEN DECODER

HD PASS

HDMI DECODER

SIGNAL

HDCP

CONFIG

OUTPUTINPUT

HDMIWINDOW

HDMIPASS-THROUGH

1 2

USB

VLR 302EBeBUS

COMERRORIDERROR

LINK

R 1

2

LINK

Extron Extron

INPUT

OFF

SENDPOWER

STATUS

OUTPUT

LINK

DTP2 R 211

CONFIG

XPA U 1002 SERIES

LIMITER/PROTECT

SIGNAL

OVERTEMP 21

POWER AMPLIFIERS

IPCP PRO 250 xi

1000

LINK

ACT

R IR

eBUS

OVER

LIMITS

COM

I/O

1

2

2

4

1

321

RTS

CTS

Tx

Rx

RELAYSIR/S

Network

POWER

ExtronIN1806Seamless Presentation Switcher

ExtronIPCP Pro 250 xiIP Link Pro Control Processor

ExtronVLP 302VoiceLift ProPendant Microphone Extron

TLP Pro 725M7" Wall Mount TouchLink Pro Touchpanel

ExtronDTP2 R 211Receiver

ExtronShareLink Pro 1000Wired and Wireless Presentation System

ExtronVLR 302EBeBUS VoiceLift Pro Receiver

HDMI

Audio

AudioAudio

Audio

Ethernet

Ethernet

Ethernet Ethernet/PoE

eBUS

HDMI

HDMI

HDMI

Display

Laptop

PC

ExtronSM 28Speakers

CATx Cableup to 330' (100 m)

Extron XPA U 1002Power Ampli�er

ExtronVLH 302VoiceLift ProHandheldMicrophone

ExtronVLC 302VoiceLift Pro Charging Station

In this corporate training room example, the VoiceLift Pro Microphone EB system is providing voice amplification from the handheld and pendant microphones. Audio from the VLR 302EB Receiver is processed and mixed with program audio by the IN1806 Presentation Switcher, then routed to the XPA U 1002 Power Amplifier. The eBUS connection from the IPCP Pro 250 xi Control Processor provides power to the VLR 302EB. This connection also provides the ability for the function button on the pendant microphone to trigger an Instant Alert message to be sent out on the network from the control processor.

WORLDWIDE SALES OFFICES

www.extron.com

Anaheim • Rale igh • S i l icon Val ley • Dal las • New York • Washington, DC • Toronto • Mexico City • Par is

London • Frankfur t • Madr id • Stockholm • Amersfoor t • Moscow • Dubai • Johannesburg • Tel Av iv • Sydney

Melbourne • Bangalore • Mumbai • New Delh i • S ingapore • Seoul • Shanghai • Bei j ing • Hong Kong • Tokyo

© 2020 Extron. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.

SPECIFICATIONS

09-202068-3572-01REV. ALetter - English - NP

OVERALL SYSTEM

Operating range 40' x 40' minimum coverageRadio frequency 1900 MHzRegulatory compliance CE, FCC Class BEnvironmental Complies with the appropriate requirements of RoHS and

WEEEProduct warrantyProduct 3 years parts and laborMicrophone battery 90 days

VLP 302 AND VLP 302 EU PENDANT MICROPHONE

Audio inputNumber/signal type 1 mono, via integrated MEMS microphones

1 mono, unbalanced, via auxiliary mic input jackConnector (1) 3.5 mm mini audio jack (tip = audio signal/bias

voltage, sleeve = GND)BatteriesNumber/type 1 AA size NiMH or alkaline batteryOperating life Rechargeable 2400 mAh NiMH batteries: min. 8 hours,

continuous use Alkaline batteries: min. 8 hours, continuous use

Recharging time ~5 hours for a 2400 mAh NiMH batteryEnclosure dimensions 3.0" H x 1.47" W x 1.2" D*

(7.6 cm H x 3.7 cm W x 3.0 cm D*) *Depth includes clip. Depth without clip = 0.9", 2.3 cm

Product weight 1.2 oz (34 g) without battery 2.2 oz (62 g) with battery

Regulatory compliance CE, FCC Class B, UL, c-UL

VLH 302 AND VLH 302 EU HANDHELD MICROPHONE

Audio inputNumber/signal type 1 mono, via integrated MEMS microphones

1 stereo, unbalanced, via auxiliary line level input jackConnectors (1) 3.5 mm mini audio jack (tip = left channel audio, ring=

right channel audio, sleeve = GND)BatteriesNumber/type 1 AA size NiMH or alkaline batteryOperating life Rechargeable 2400 mAh NiMH batteries: min. 8 hours,

continuous use Alkaline batteries: min. 8 hours, continuous use

Recharging time ~5 hours for a 2400 mAh NiMH batteryEnclosure dimensions 8.0" H x 1.8" (max) diameter

(20.2 cm H x 4.6 cm [max] diameter)Product weight 4.0 oz (113 g) without battery

5.0 oz (142 g) with batteryRegulatory compliance CE, FCC Class B, UL, c-UL

VLC 302 CHARGING STATION

External power supply 100 VAC to 240 VAC, 50-60 Hz, external; to 5 VDC, 2.6 A, regulated USB Micro B

Power input requirements 5 VDC, 0.5 AEnclosure dimensions 1.5" H x 4.4" W x 3.4" D

(3.9 cm H x 11.3 cm W x 8.6 cm D)Product weight 0.66 lbs (0.3 kg)Regulatory compliance CE, UL, c-ULEnvironmental Complies with the appropriate requirements of ENERGY

STAR® (ENERGY STAR qualified power supply, efficiency level VI).

VLR 302EB RECEIVER

AudioFrequency response 100 Hz to 6 kHz, +/- 3 dBTHD + Noise < 1% at nominal levelS/N 90 dB, 100 Hz to 20 kHz

(3.5mm TRS input to analog output)Audio input 2 proprietary RF wirelessAudio outputNumber/signal type 1 mono, balanced or unbalancedConnector (1) 3.5mm captive screw connector, 3 poleImpedance Balanced: 100 ohm, Unbalanced: 50 ohmMaximum level Balanced output: +13 dBu, Unbalanced output: 6 dBVUser controls 1 eBUS Port

1 Front Panel Link ButtoneBUS control interfaceeBUS control ports (1) 3.5 mm captive screw connector, 4 poleeBUS pin configuration +V = +12 VDC; +S = + signal; -S = - signal; G = groundRecommended cable type Extron STP20-2 or STP20-2P cableSoftware and control optionsConfiguration software Global Configurator Plus and ProfessionalProgramming software Global ScripterControl apps Extron ControlUtilities ToolbeltPower input requirements 12 VDC, 0.3 AMounting Rack mountableEnclosure dimensions 1.66" H* x 2.15" W x 4.50" D

(4.2 cm H x 5.5 cm W x 11.4 cm D) *Height is measured out from the mounting surface.

Product weight 0.25 lbs (0.11 kg)Regulatory compliance CE, FCC Class B, UL, c-UL

For complete specifications, please go to www.extron.comSpecifications are subject to change without notice.

Model Version Description Part numberVLME 3001 Single Pendant VoiceLift Pro, eBUS 42-266-01VLME 3002 Dual Pendant VoiceLift Pro, eBUS 42-266-02 VLME 3002H Pendant & Hand VoiceLift Pro, eBUSN 42-266-03VLME 3001 EU Single Pendant VoiceLift Pro, eBUS -EU version 42-266-11VLME 3002 EU Dual Pendant VoiceLift Pro, eBUS -EU version 42-266-12VLME 3002H EU Pendant & Handheld VoiceLift Pro, eBUS -EU version 42-266-13

The VoiceLift Pro EB is certified for use in the following countries:

US/Canada Version EU Version

United States Austria Greece Norway

Canada Belgium Hungary Poland

American Samoa Bulgaria Iceland Portugal

Guam Croatia Ireland Romania

Northern Mariana Islands Cyprus Italy Slovakia

Puerto Rico Czechia Latvia Slovenia

United States Virgin Islands

Denmark Liechtenstein Spain

Estonia Lithuania Sweden

Finland Luxembourg Switzerland

France Malta United Kingdom

Germany Netherlands