voltage and current mode operation reference …

c::: ITZENBERGER .=::J PI ES

PRELIMINARY INFORMATION

1/14 © Spitzenberger & Spies 2016 – all data are subject to change

SPS-TD-APS-Overview-e-0002.docx

APS series of 4-Quadrant Amplifiers

4-QUADRANT VOLTAGE / CURRENT AMPLIFIER

Fig. 1: APS 1000 Frontpanel

NEW: Constant current mode The adjustable and desired output current is automatically regulated and stabilized according to the user’s preferences. The only limitation is the amplifier’s performance characteristic Touch panel operation 7” 800x480

Very high peak-load ability (up to 2 … 3 ms)

The relating standards: IEC/EN 61000-3-2 IEC/EN 61000-3-3 IEC/EN 61000-3-11 IEC/EN 61000-3-12 IEC/EN 60146-1-1 IEC/EN 61000-2-2 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-8 IEC/EN 61000-4-11 IEC/EN 61000-4-13 IEC/EN 61000-4-14 IEC/EN 61000-4-17 IEC/EN 61000-4-27 IEC/EN 61000-4-28 IEC/EN 61000-4-29 IEC/EN 61000-4-34 IEC/EN 61131-2 IEC/EN 61496-1 IEC/EN 61800-3 IEC/EN 62040-2 MIL-STD-461 MIL-STD-704 MIL-STD-1275 RTCA DO-160 SEMI F47-0706

Very low internal resistance

Very fast slew rate > 52V/μs (rise time < 5μs at 230Vrms as required by IEC/EN 61000-4-11)

Extremely low harmonic distortion - even under very non-linear load conditions

Operates from DC up to 10kHz large signal bandwidth (-3dB) - optional up to 30kHz

Small signal bandwidth up to 50kHz or 100kHz

High long-term overload characteristic (up to 1-hour)

High short-term overload characteristic (for 5 … 10mins.)

Sink operation mode included – real 4-quadrant operation mode

Current and voltage limitation adjustable

VOLTAGE AND CURRENT MODE OPERATION REFERENCE SOURCE FOR ALL APPLICATIONS

Distributed by: Reliant EMC LLC, +4083209644/+4089165750, www.reliantemc.com




VERY FAST RISE AND FALL TIME

Due to the very fast slew rate of >52V/s the APS is fully compliant according to the require-ments of IEC/EN 61000-4-11 in practice.

Fig. 2: rise time of the output voltage

Fig. 3: fall time of the output voltage

EXTREMELY HIGH LOADABILITY

150% of rating is available in the case of a real load. Amplifier stability is absolute-ly assured when operating with either inductive or capa-citive loads.

The sink mode power capability is approx. 30% of the source mode capability.

DC-Simulation

DC Signals can easily be ge-nerated using the directly coupled ironless amplifier output-stage

All test devices requiring a DC content within their input current can be supplied without problems.

0

25

50

75

100

125

150

175

Pow

er in

%

cap. 0 1 ind. 0

Load power factor Fig. 4: APS Performance characteristic

Fig. 5: APS DC Characteristic

Klasse D Überprüfung - Zeitfenster 300 von 469

Geprüft mit EMC test software V2.3f / PAS1000 von Spitzenberger + Spies GmbH & Co. KG, Schmidstr 32-34, D-94234 Viechtach, 21.12.2000

M

wt

i/A i/ipk

0.35

1

0.35

1

57.0% inside positive envelope100.0% inside negative envelopePower: 457.7 WNo Class D specimen

-4

-2

0

2

4

Pi/2 Pi 3/2 Pi






TOUCH-PANEL USER INTERFACE

Fig. 6: Main menu

Fig. 7: Selection of the out signal waveshape

Fig. 8: Selection of the output voltage range

Fig. 9: Measurement unit display





APS 1000 - DC CURRENT CHARACTERISTIC - Imax,cont, Imax,short, Imax,peak

APS 1000 - DC POWER CHARACTERISTIC - Pmax,cont, Pmax,short, Pmax,peak

‐20

‐15

‐10

‐5

0

5

10

15

20

‐400 ‐300 ‐200 ‐100 0 100 200 300 400

U[V]

I[A]

‐1500

‐500

500

1500

2500

3500

4500

5500

6500

‐400 ‐300 ‐200 ‐100 0 100 200 300 400

P[W]

U[V]






APS 1000 – AC CURRENT CHARACTERISTIC - Icont,cos 1, Icont,cos 0.7, Icont,cos 0, Ishort, cos 1

APS 1000 – AC POWER CHARACTERISTIC - Pcont,cos 1, Pcont,cos 0.7, Pcont,cos 0, Pshort, cos 1

0

2

4

6

8

10

‐275 ‐225 ‐175 ‐125 ‐75 ‐25 25 75 125 175 225 275

I[A]

U[V]

0

2

4

6

8

10

‐275 ‐225 ‐175 ‐125 ‐75 ‐25 25 75 125 175 225 275

P[VA]

U[V]







‐60

‐40

‐20

0

20

40

60

‐400 ‐300 ‐200 ‐100 0 100 200 300 400

U[V]

I[A]

‐5000

0

5000

10000

15000

20000

25000

‐400 ‐300 ‐200 ‐100 0 100 200 300 400

P[W]

U[V]








0

5

10

15

20

25

30

‐275 ‐250 ‐225 ‐200 ‐175 ‐150 ‐125 ‐100 ‐75 ‐50 ‐25 0 25 50 75 100 125 150 175 200 225 250 275

I[A]

U[V]

‐500

1000

2500

4000

5500

7000

‐275 ‐225 ‐175 ‐125 ‐75 ‐25 25 75 125 175 225 275

P[VA]

U[V]







‐120

‐90

‐60

‐30

0

30

60

90

120

‐400 ‐320 ‐240 ‐160 ‐80 0 80 160 240 320 400

U[V]

I[A]

‐10000

‐2000

6000

14000

22000

30000

38000

46000

‐400 ‐300 ‐200 ‐100 0 100 200 300 400

P[W]

U[V]








0

10

20

30

40

50

60

‐275 ‐225 ‐175 ‐125 ‐75 ‐25 25 75 125 175 225 275

I[A]

U[V]

0

2000

4000

6000

8000

10000

12000

14000

‐275 ‐225 ‐175 ‐125 ‐75 ‐25 25 75 125 175 225 275

P[VA]

U[V]







‐200

‐150

‐100

‐50

0

50

100

150

200

‐400 ‐300 ‐200 ‐100 0 100 200 300 400

U[V]

I[A]

‐20000

‐10000

0

10000

20000

30000

40000

50000

60000

70000

‐400 ‐300 ‐200 ‐100 0 100 200 300 400

P[W]

U[V]








0

10

20

30

40

50

60

70

80

‐275 ‐250 ‐225 ‐200 ‐175 ‐150 ‐125 ‐100 ‐75 ‐50 ‐25 0 25 50 75 100 125 150 175 200 225 250 275

I[A]

U[V]

0

2500

5000

7500

10000

12500

15000

17500

20000

22500

‐275 ‐225 ‐175 ‐125 ‐75 ‐25 25 75 125 175 225 275

P[VA]

U[V]





TECHNICAL DATA - GENERAL APS Series Nominal voltage Voltage mode

AC: 135Vrms / 270Vrms DC: ±191V / ±382V

Load regulation Max. 0,1% Line regulation < 1.5x10-4 per 10V line-voltage change Frequency range DC … 10kHz (-3dB) Slew rate > 52V/μs (rise time < 5μs at 230Vrms according to IEC/EN 61000-4-11) Harmonic distortion

135V / DC … 450Hz: 135V / 450Hz … 1kHz: 135V / 1kHz … 10kHz:

270V / DC … 450Hz: 270V / 450Hz … 10kHz:

Max. / Typ. 0,3% / 0,1% 2,5% / 1,5%

0,1% / 0,05% 0,6% / 0,3% on request

Protection circuits overload / short circuit / over temperature Input

Max. voltage: ±5Vp ±10Vp ±16Vp Impedance: approx. 8k

Interface Ethernet 100MBit Internal control oscillator Type: 4-channel synthesizer

Wave form: DC, Sine, Rectangle, Triangle, DC Offset, Arbitrary Amplitude resolution: 17Bit

Frequency range: DC … 1MHz Frequency resolution: 1μHz

Frequency accuracy 25ppm Memory depth: 1MSample Synth functions: ADD, AM, FM, PM Sequence memory: 1024 steps Ambient temperature Relative Humidity

0°C up to 40°C max. 80% for temperatures <31°C, decreasing linearly to 50% at 40°C






TECHNICAL DATA – APS 1000 / 2500 / 5000 APS 1000 APS 2500 APS 5000 Power DC

- continuous: - approx. 1h:

1000W 1500W

2500W 3750W

5000W 7500W

Short-time power 2000VA 5000VA 10000VA Peak power

- at 135V: - at 270V:

3200VAp

6400VAp 10500VAp 21000VAp

21000VAp 42000VAp

Peak current 23Ap 77Ap 155Ap Power Supply (±10%, 50Hz … 60Hz): 230V Schuko 230V/400V CEE Protection: 16A 3 x 16A 3 x 20A Housing Amplifier: 19”, 4U 19”, 5U 19”,7U

approx. dimensions (mm): 178x483x700 222x483x700 311x483x700 Power Supply: included 19”, 5U 19” 5U

approx. dimensions (mm): - 222x483x700 222x483x700 Weight Amplifier (approx.):

Power Supply (approx.): 45kg 30kg 45kg

- 85kg 100kg

TECHNICAL DATA – APS 7500 / 10000 / 15000 APS 7500 APS 10000 APS 15000 Power DC - continuous:

- approx. 1h: 7500W

11250W 10000W 15000W

15000W 22500W

Short-time power 15000VA 20000VA 30000VA Peak power

- at 135V: - at 270V:

31500VAp

63000VAp 42000VAp

84000VAp 63000VAp

126000VAp Peak current 233Ap 311Ap 466Ap Power Supply (±10%, 50Hz … 60Hz): 230V/400V CEE Protection:

on request

Housing Amplifier: approx. dimensions (mm):

Power Supply: approx. dimensions (mm):

Weight

Amplifier (approx.): Power Supply (approx.):





APS SERIES ADD-ONS AND OPTIONS Options Interfaces IEEE488, RS232, RS485 (USB Host, USB Device on request) Adjustable internal impedance 0 … 10 Ω, 0 … 100mH 06: Output voltage monitor (electrically isolated) 07: Output current monitor (electrically isolated) 11-33Z: Additional voltage range 0 … 33Vrms (±47VDC )

11-56Z: Additional voltage range 0 … 56Vrms (±79VDC )

11-240Z: Additional voltage range 0 … 240Vrms (±339VDC )

11-300: Special voltages 5) 0 … 150Vrms (±212VDC ) / 0 … 300Vrms (±424VDC )

11-300Z: Special voltage and additional voltage range 5)

0 … 60Vrms (±85VDC ) / 0 … 150Vrms (±212VDC ) / 0 … 300Vrms (±424VDC )

11-630DC: Additional DC-voltage range

0 … +630VDC in combination with option 11-300 or 11-300Z

17-300: Floating output 6) 300Vrms

21: Parallel operation mode 7) (DC … 5kHz)

28-540/C: Voltage transformer 8) Other voltages on request

29-xxx/C: High voltage transformer 8) 1000V and above values on request


voltage and current mode operation reference …

Documents