voltas jpsk

LABOUR RATE

VOLTEC ENERGY SYSTEMS

S.No ITEM DESCRIPTION Qty Unit Rate Amount

b) MEDIA CENTRE 21.00 SUB STATION SAFETY EQUIPMENT : MC 2 MISC

1.10 MC 2 MISC

MC 2 MISC

a) 1100 V grade size 1000 x 900 x 15 mm thick 15 Nos. MC 2 MISC

1.20 1 No. MC 2 MISC

1.30 ur Nos. MC 2 MISC

1.40 Providing first aid box as per IS:13115. 1 Set MC 2 MISC

MC 2 MISC

MC 2 BBT

2.0 BUS DUCT/BUS BAR TRUNKING SYSTEM : MC 2 BBT

MC 2 BBT

2.1 Bus Duct : MC 2 BBT

MC 2 BBT

MC 2 BBT

MC 2 BBT

a)

ur RM

MC 2 BBT

MC 2 BBT

b)

ur RM

MC 2 BBT

MC 2 BBT

c)

ur RM

MC 2 BBT

MC 2 BBT

2.2 Bus Bar Trunking (BBT) : MC 2 BBT

MC 2 BBT

BUILDING NAME

ITEM CODE

Supplying and fixing 1000 mm x 900 mm wide checkered rubber matting conforming to IS 15652-2006 complete as required.

Supplying & fixing standard shock treatment charts in English & Hindi / (Local Language) duly framed and covered with glass.

Providing & fixing HT danger notice plate 200 mm x 150 mm made of mild steel atleast 2mm thick & vitreous enameled white on both sides and with inscription in signal red colour with skull & bone on front side as required.

TOTAL OF SUB STATION SAFETY EQUIPMENT CARRIED OVER TO SUMMARY

Design, manufacturing, supply, installation, testing & commissioning (at site) of sheet steel enclosed 3 phase & neutral, 400V, 50 Hz., 50 KA copper conductor bus duct with insulation of thermal rating confirming to class 'H' including bends, transposition piece, expansion joint, Tees, End termination units, Feeder units, tap off unit etc. with all flexible connections as per specifications and drawings with all accessories, supports and termination of bus duct to switchgear/transformer.

3000A, 50kA @ 1 Sec., TP+N, Bus Duct (IP.55) with 8 Nos. of Terminations and all other accessories as required as per specifications, and approved Shop Drawings.



LABOUR RATE


2.2.1

MC 2 BBT

MC 2 BBT

MC 2 BBT

MC 2 BBT

i)ur RM

MC 2 BBT

MC 2 BBT

ii)ur RM

MC 2 BBT

MC 2 BBT

iii)ur RM

MC 2 BBT

MC 2 BBT

iv)ur RM

MC 2 BBT

MC 2 BBT

v)ur RM

MC 2 BBT

vi)ur RM

MC 2 BBT

MC 2 BBT

vii)ur RM

MC 2 BBT

MC 2 BBT

viii)ur RM

MC 2 BBT

MC 2 BBT

ix)ur RM

MC 2 BBT

MC 2 BBT

Notes: MC 2 BBT

MC 2 BBT

a)MC 2 BBT

MC 2 BBT

b) Rates shall be inclusive of all accessories & fittings. MC 2 BBT

MC 2 BBT

Design, manufacture, assembly, supply, installation, testing and commissioning (at site) of following capacity compact, Copper Conductor, Bus Bar Trunking System including Bends, Tees, Expansion Joints, Feeder Units, Tap off Units, Transposition pieces, Flexible Connections etc. with all other Hardware/accessories required for installation of Bus Bar Trunking as per Specifications, approved Shop Drawings and instruction of Engineer-in-charge.

Shutter type spring loaded arrangements shall be provided for tap off system. The shutter shall get closed when tap off box is taken out. Tap off facilities shall be there at every 500 mm interval as per standard.

1500A, TPN+E, 400 Volt, 40 KA, compact, copper conductor BBT.

1250 A, TPN+E, 400 Volt, 40 KA, compact, copper Conductor BBT.








The quantity mentioned above is approximate. Bidder to procure /manufacture the items as per actual site measurement & approved Shop drawings.

LABOUR RATE


2.2.2

MC 2 BBT

MC 2 BBT

i) 250A, TPN MCCB Tap off box. ur No. MC 2 BBT

MC 2 BBT

ii) 125A TPN MCCB Tap off box. ur Nos. MC 2 BBT

MC 2 BBT

iii) 100A TPN MCCB Tap off box. ur Nos. MC 2 BBT

MC 2 BBT

iv) 80A TPN MCCB Tap off box. ur Nos. MC 2 BBT

MC 2 BBT

v) 63A TPN MCCB Tap off box. ur Nos. MC 2 BBT

MC 2 BBT

vi) 40A TPN MCCB Tap off box. ur Nos. MC 2 BBT

MC 2 BBT

vii) 32A TPN MCCB Tap off box. ur Nos. MC 2 BBT

MC 2 BBT

2.2.3

MC 2 BBT

MC 2 BBT

a) 1500 Amp with 1600 Amp, TPN, 40 KA, MDO ACB. ur Nos. MC 2 BBT

MC 2 BBT

b) 1250 Amp with 1250 Amp, TPN, 40 KA, MDO ACB. ur Nos. MC 2 BBT

MC 2 BBT

c) 1200 Amp with 1200 Amp, TPN, 40 KA, MDO ACB. ur Nos. MC 2 BBT

MC 2 BBT

d) 1000 Amp with 1000 Amp, TPN, 40 KA, MDO ACB. ur Nos. MC 2 BBT

MC 2 BBT

e) 800 Amp with 800 Amp, TPN, 40 KA, MDO ACB. ur Nos. MC 2 BBT

MC 2 BBT

f) 630 Amp with 630 Amp, TPN, 40 KA, MCCB. ur Nos. MC 2 BBT

g) 400 Amp with 400 Amp, TPN, 40 KA, MCCB. ur Nos. MC 2 BBT

MC 2 BBT

h) 250 Amp with 250 Amp, TPN, 40 KA, MCCB. ur Nos. MC 2 BBT

MC 2 BBT

MC 2 BBT

2.2.4 MC 2 PANEL

Design, manufacture, assembly, supply, installation, testing and commissioning of plug-in type TPN tap off box of following capacity on the existing Bus Bar Trunking and complete with TPN MCCBs, links, interconnections, earthing etc. as required, as per specifications and as per approved Shop drawings.

Design, Manufacture, Supply, installation, testing and commissioning of End Feed Box/Bus Bar Trunking Adapter Box, of following ratings with Digital Voltmeter & Ammeter (ELF 3259 of Conzerv or Equivalent) complete with 5VA, class 1.0 CTs of required ratio and one set of phase indication lamps and back-up SPMCBs, as per approved drawing and specifications.

Design, Manufacturing, Supply, installation, testing and commissioning of Bus Coupler panels with ACB/MCCB of following ratings for Bus Duct/Bus Bar Trunking System.

LABOUR RATE


- MC 2 PANEL

MC 2 PANEL

- MC 2 PANEL

- MC 2 PANEL

MC 2 PANEL

a) ur Nos. MC 2 PANEL

MC 2 PANEL

b) ur Nos. MC 2 PANEL

MC 2 PANEL

c) ur Nos. MC 2 PANEL

MC 2 PANEL

Notes: MC 2 PANEL

MC 2 PANEL

i) MC 2 PANEL

MC 2 PANEL

ii) MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

3.00 LV SWITCHGEAR PANELS & DISTRIBUTION BOARDS: MC 2 PANEL

MC 2 PANEL

LV SWITCHGEAR PANELS : MC 2 PANEL

MC 2 PANEL

The Bus Coupler panel shall consist of 400V, 40 KA@ 1 Sec, 4 pole, Draw out type, Electrically operated, ACB/MCCB complete with under voltage and shunt trip release, antipumping protection, ON/OFF indication lamps etc. as required, as per specifications and approved Shop drawings.

Bus Couper Panel shall be suitable for Termination of Compact Bus Bar Trunking from Top/Bottom as per approved shop drawing.

Bus Coupler Breaker shall have suitable No. of NO/NC contacts for required interlocking with the Breakers of End feed units of Bus Bar Trunking.

Bus Coupler Panel with 1000 Amp, 400V, 40 KA @ 1 Sec, 4 Pole, EDO ACB


Bus Coupler Panel with 630 Amp, 400V, 40 KA @ 1 Sec, 4 Pole, Motorised MCCB

The fabrication of bus duct/Bus Bar Trunking shall be taken up only after actual measurement and site routing. Necessary bends/transposition pieces/ expansion joints etc. shall be estimated & included. Payment will be made on running meter basis.

The supply and fabrication & installation of structural steel for bus duct/Bus Bar Trunking support is included in the above items.

TOTAL OF BUS DUCT/BUS BAR TRUNKING SYSTEM CARRIED OVER TO SUMMARY

LABOUR RATE


. MC 2 PANEL

MC 2 PANEL

Important Notes: Common for all Switchboard: MC 2 PANEL

MC 2 PANEL

1.00 MC 2 PANEL

MC 2 PANEL

2.00 Fault current wherever mentioned shall be Ics value. MC 2 PANEL

MC 2 PANEL

3.00 MC 2 PANEL

MC 2 PANEL

4.00 All feeder doors shall have pad locking arrangement. MC 2 PANEL

MC 2 PANEL

5.00 All TP feeders shall have solid isolable neutral link. MC 2 PANEL

MC 2 PANEL

6.00 MC 2 PANEL

MC 2 PANEL

7.00 All power contactors including NIC shall be of AC3 duty. MC 2 PANEL

MC 2 PANEL

8.00 MC 2 PANEL

MC 2 PANEL

9.00 MC 2 PANEL

Design, manufacture, supply, unloading, receiving, storing, handling, installation, testing and commissioning of following LV panels suitable for 400 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, Copper bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of as indicated elsewhere or shown in Single Line Diagrams.

The BOQ shall be read inconjunction with general notes, specification and Single Line Diagrams. Incase of any discrepancy between specification, BOQ and SLD, the same shall be brought to the notice of Employer before quoting the rates, otherwise stringent condition shall be deemed to have been considered.

All MCCB shall be provided with door interlocked rotary handle with ON/OFF/TRIP position indicator, microprocessor based releases for over current, selectable short circuit and instentaneous short circuit protection (settable at site). I/C MCCB shall be provided with E/F release/ protection also.

All MCCB used in starter feeder shall be suitable for motor duty application.

All ACB's shall be with micro processor based O/C and S/C releases and Breaker Control Switch (BCS) having lost motion device. I/C ACBs shall be provided with E/F release also. Bus coupler shall be provided without releases.

Spare contacts of ACB/Relays/Contactor etc. shall be wired upto terminal block.

LABOUR RATE


10.00 MC 2 PANEL

MC 2 PANEL

11.00 Capacitor shall be super heavy duty type (MPP technology). MC 2 PANEL

MC 2 PANEL

12.00 MC 2 PANEL

MC 2 PANEL

13.00 MC 2 PANEL

MC 2 PANEL

14.00 MC 2 PANEL

MC 2 PANEL

15.00 All CT, PT shall be epoxy resin cast. MC 2 PANEL

MC 2 PANEL

16.00 All meters are digital type. MC 2 PANEL

MC 2 PANEL

17.00 MC 2 PANEL

MC 2 PANEL

18.00 MC 2 PANEL

MC 2 PANEL

19.00 MC 2 PANEL

MC 2 PANEL

20.00 Bus bar chamber shall be kept at top of the all panels. MC 2 PANEL

MC 2 PANEL

21.00 MC 2 PANEL

MC 2 PANEL

22.00 MC 2 PANEL

MC 2 PANEL

23.00 All indicating light shall be LED type . MC 2 PANEL

MC 2 PANEL

24.00 MC 2 PANEL

MC 2 PANEL

25.00 MC 2 PANEL

MC 2 PANEL

26.00 MC 2 PANEL

All switchgear used in starter feeder shall be type-2 co-ordinated. Manufacturer is required to submit manufacturers type-2 co-ordination chart for the make used.

All outgoing terminals (power and control) shall be brought upto cable alley. 10% extra terminals shall be provided.

10% extra indicating lamp in loose shall be supplied along with panel.

Removable lifting hook shall be provided in all transportation section.

Panel shall be powder coated of approved shade with minimum 60 micron thickness.

ACB's/MCCB's in one particular panel shall be of one similar make.

Size of Voltmeter / Ammeter for incomer also, 96mm x 96mm flush mounted with shrouded terminal shall be used in the panel.

All bus bar shall be insulated with coloured PVC Sleeve i.e.RYB,BK as per colour code.

Internal wiring of panel shall be with size 2.5sqmm Flexible Copper Conductor for CT circuit and control wiring with 1.5 sqmm.

Each vertical section of floor mounted panel shall have independent base frame (75mm x 40mm) size made out of 3 mm sheet steel (LT Panel & DG Panel).

All the makes shall be as per Employer's approved make list only.

Wherever only voltmeter & ammeter are required, the same may be provided in combined meter suitable for both parameter.

LABOUR RATE


3.10 SMDB-EE-ME2.00-E2-01 : MC 2 PANEL

Location: Ground Floor : MC 2 PANEL

MC 2 PANEL

SMDB shall Comprise of the following: MC 2 PANEL

MC 2 PANEL

a) Incomings: MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

b) Metering & indication for incoming breaker: MC 2 PANEL

MC 2 PANEL

Incoming breaker shall be provided with MC 2 PANEL

MC 2 PANEL

i) MC 2 PANEL

MC 2 PANEL

ii) MC 2 PANEL

MC 2 PANEL

iii) One set (3 Nos) phase indication lamp with backup SP MCB. MC 2 PANEL

MC 2 PANEL

Notes : MC 2 PANEL

MC 2 PANEL

1.00 MC 2 PANEL

MC 2 PANEL

2.00 MC 2 PANEL

MC 2 PANEL

c) BUS BARS: MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

d) Outgoing: MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

One (1) No. 400 Amps, 400 V, 40kA TPN MCCB with ON/OFF/TRIP indication lamp and TNC control switch, under voltage & shunt trip release, microprocessor based O/C, S/C & E/F protection etc. complete as required for Incomming Supply Feeder as per SLD, (E/SP/ME2 5.S.01.01, Rev. A).

One (1) No. Digital Multifunction meter with RS-485 port suitable for measurement of voltage, currents and Frequency (ELF3259 of 'Conzerv' make or equivalent).

One (1) set 3 Nos. CTs of ratio 400/5A,15VA, Class 1.0 as required.

Sufficient No. of contacts terminals shall be provided in the panel as required for necessary remote operation and indications etc.

Operation interlocks as per specification & drawings indicating sufficient nos. of potential free contacts for interlocking/ indication annunciation/ control etc shall be provided by the bidder as required.

One (1) Sets of 500Amp., 40kA, TPN+E, Copper Bus bar with colour coded, heat shrinkable sleeves (with 100% neutral). Copper Earth Bus of 40 x 6 mm.

Outgoing feeders, supplying to the pumps shall be provided with Earth leakage relay with CBCT as required and as per SLD (E/SP/ME2 5.S.01.01, Rev. A) and specifications.

LABOUR RATE


i) Two (2) Nos. 100 A, 40 KA, TPN MCCB. MC 2 PANEL

MC 2 PANEL

ii) One (1) No. 80 A, 40 KA, TPN MCCB. MC 2 PANEL

MC 2 PANEL

iii) Four (4) Nos. 63 A, 40 KA, TPN MCCB. MC 2 PANEL

MC 2 PANEL

iv) Three (3) Nos. 40 A, 40 KA, TPN MCCB. MC 2 PANEL

1 Set MC 2 PANEL

3.20 FINAL DISTRIBUTION BOARDS : MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

3.2.1 DB-EE-ME2.00-E2-01 : MC 2 PANEL

MC 2 PANEL

Incomer: MC 2 PANEL

MC 2 PANEL

- 100A TP MCB Isolator. MC 2 PANEL

MC 2 PANEL

Busbar : MC 2 PANEL

MC 2 PANEL

- 150A 4P Cu. busbar MC 2 PANEL

MC 2 PANEL

Outgoing – (10KA) comprising MC 2 PANEL

MC 2 PANEL

Section-1 MC 2 PANEL

MC 2 PANEL

- One (1) no. 16A 3 phase, RCD (100 mA). MC 2 PANEL

MC 2 PANEL

- Fifteen (15) nos. 10A SP MCB. MC 2 PANEL

MC 2 PANEL


MC 2 PANEL

- One (1) no. 63A 3 Phase RCD (30 mA). MC 2 PANEL

MC 2 PANEL

- Twenty One (21) nos. 20A SP MCB. MC 2 PANEL

MC 2 PANEL

- 1 Set MC 2 PANEL

MC 2 PANEL

3.2.2 DB-EE-ME2.00-E2-02 : MC 2 PANEL

MC 2 PANEL

Incomer: MC 2 PANEL

MC 2 PANEL


SMDB-EE-ME2.00-E2-01 described as above (from a to d) and as per Specifications and SLD.

Design, manufacture, supply, installation (recessed/ surface), testing and commissioning of following switch fuse Unit/ MCCB/MCB type distribution boards as per drawings & specifications. The surface distribution boards shall be mounted as required and as per specifications and relevant approved shop drawings.

DB-EE-ME2.00-E2-01 as described above and as per DB chart.

LABOUR RATE


MC 2 PANEL

Busbar : MC 2 PANEL

MC 2 PANEL


MC 2 PANEL


MC 2 PANEL


MC 2 PANEL

- One (1) no. 16A, 3 Phase RCD (100 mA). MC 2 PANEL

MC 2 PANEL

- Nine (9) nos. 10A SP MCB. MC 2 PANEL

MC 2 PANEL


MC 2 PANEL

- One (1) no. 32A, 3 Phase RCD (30 mA). MC 2 PANEL

MC 2 PANEL

- Twelve (12) nos. 20A SP MCB. MC 2 PANEL

MC 2 PANEL

- 1 Set MC 2 PANEL

3.2.3 DB-EE-ME2.10-D2-03 : MC 2 PANEL

MC 2 PANEL

Incomer: MC 2 PANEL

MC 2 PANEL


MC 2 PANEL

Busbar : MC 2 PANEL

MC 2 PANEL


MC 2 PANEL


MC 2 PANEL


MC 2 PANEL


MC 2 PANEL

- Twelve (12) nos. 10A SP MCB. MC 2 PANEL

MC 2 PANEL


MC 2 PANEL


MC 2 PANEL

- Twenty One (21) nos. 20A, SP MCB. MC 2 PANEL

MC 2 PANEL

- 1 Set MC 2 PANEL

MC 2 PANEL

3.2.4 DB-EE-ME2.10-D2-04 : MC 2 PANEL

DB-EE-ME2.00-E2-02 as described above and as per DB chart.

DB-EE-ME2.10-D2-03 as described above and as per DB chart

LABOUR RATE


MC 2 PANEL

Incomer: MC 2 PANEL

MC 2 PANEL


MC 2 PANEL

Busbar : MC 2 PANEL

MC 2 PANEL


MC 2 PANEL


MC 2 PANEL


MC 2 PANEL


MC 2 PANEL

- Twenty One (21) nos. 20A SP MCB. MC 2 PANEL

MC 2 PANEL


MC 2 PANEL


MC 2 PANEL

- Twenty Four (24) nos. 20A SP MCB. MC 2 PANEL

MC 2 PANEL

- 1 Set MC 2 PANEL

MC 2 PANEL

3.30 MC 2 PANEL

MC 2 PANEL

a) 250 Amp, 4 pole, 400V, 40 KA @ 1 Sec. ur Nos. MC 2 PANEL

MC 2 PANEL

b) 200 Amp, 4 pole, 400V, 40 KA @ 1 Sec. ur Nos. MC 2 PANEL

MC 2 PANEL

c) 100 Amp, 4 pole, 400V, 40 KA @ 1 Sec. ur Nos. MC 2 PANEL

MC 2 PANEL

d) 63 Amp, 4 pole, 400V, 40 KA @ 1 Sec. ur Nos. MC 2 PANEL

MC 2 PANEL

e) 40 Amp, 4 pole, 400V, 40 KA @ 1 Sec. 1 No. MC 2 PANEL

MC 2 PANEL

f) 32 Amp, 4 pole, 400V, 40 KA @ 1 Sec. ur Nos. MC 2 PANEL

MC 2 PANEL

MC 2 PANEL

4.00 CABLES, SUB MAINS & CABLE TRAYS : MC 2 CAB

MC 2 CAB

4.10 Cables in Under Ground Installations : MC 2 CAB

MC 2 CAB

DB-EE-ME2.10-D2-04 as described above and as per DB chart.

Design, Manufacturing, Supply, installation, Testing and Commissioning of Auto Transfer Switch Panel (ATS Panels) of following ratings as per specifications, SLD and approved Shop drawing :-

TOTAL OF LV SWITCHGEAR PANELS & DISTRIBUTION BOARDS CARRIED OVER TO SUMMARY

LABOUR RATE


MC 2 CAB

MC 2 CAB

4.1.1 MC 2 CAB

MC 2 CAB

a) 4 core 400 Sqmm 10 RM MC 2 CAB

b) 4 core 300 Sqmm 10 RM MC 2 CAB

c) 4 core 240 Sqmm 200 RM MC 2 CAB

d) 4 core 185 sqmm 10 RM MC 2 CAB

e) 4 core 150 sqmm 10 RM MC 2 CAB

f) 4 core 120 sqmm 10 RM MC 2 CAB

g) 4 core 95 sqmm 10 RM MC 2 CAB

h) 4 core 70 sqmm 20 RM MC 2 CAB

i) 4 core 50 sqmm 10 RM MC 2 CAB

j) 4 core 35 sqmm 50 RM MC 2 CAB

k) 4 core 25 sqmm 50 RM MC 2 CAB

l) 4 core 16 sqmm 20 RM MC 2 CAB

m) 4 core 10 sqmm 10 RM MC 2 CAB

n) 4 core 6 sqmm 10 RM MC 2 CAB

o) 4 core 4 sqmm 10 RM MC 2 CAB

p) 3 core 25 sqmm 10 RM MC 2 CAB

q) 3 core 16 sqmm 10 RM MC 2 CAB

r) 3 core 10 sqmm 10 RM MC 2 CAB

s) 3 core 6 sqmm 10 RM MC 2 CAB

t) 3 core 4 sqmm 10 RM MC 2 CAB

u) 2 core 6 sqmm 10 RM MC 2 CAB

v) 2 core 4 sqmm 10 RM MC 2 CAB

MC 2 CAB

4.20 Cables on Racks / Pipes / Ducts / Wireways/Cable Trays : MC 2 CAB

MC 2 CAB

MC 2 CAB

MC 2 CAB

4.2.1 Copper Conductor Armoured Cables : MC 2 CAB

MC 2 CAB

a) 4 core 400 Sqmm 10 RM MC 2 CAB

b) 4 core 300 Sqmm 10 RM MC 2 CAB

c) 4 core 240 Sqmm 100 RM MC 2 CAB

d) 4 core 185 sqmm 10 RM MC 2 CAB

Supply, installation, testing and commissioning of following sizes of PVC sheathed, XLPE insulated copper conductor power/multicore control, armoured, Multi-strand cable of 1.1 KV grade in ground including digging the trench, laying the cable with sand and brick covering, back filling reaming etc as required, as per specfications and as per directions of Engineer-in-charge.

Copper Conductor, Armoured XLPE Cables (PVC/SWA/XLPE) :

Supply, installation, testing and commissioning of following sizes of PVC sheathed, XLPE insulated, copper conductor, power/multicore, control, armoured, Multi-stranded cable of 1.1 KV grade on surface of wall or in existing cable tray /masonary ducts/hume pipe with fixing hardware etc as required, as per specifications and as per direction of Engineer-in-charge.

LABOUR RATE


e) 4 core 150 sqmm 10 RM MC 2 CAB

f) 4 core 120 sqmm 10 RM MC 2 CAB

g) 4 core 95 sqmm 10 RM MC 2 CAB

h) 4 core 70 sqmm 10 RM MC 2 CAB

i) 4 core 50 sqmm 10 RM MC 2 CAB

j) 4 core 35 sqmm 10 RM MC 2 CAB

k) 4 core 25 sqmm 200 RM MC 2 CAB

l) 4 core 16 sqmm 200 RM MC 2 CAB

m) 4 core 10 sqmm 100 RM MC 2 CAB

n) 4 core 6 sqmm 100 RM MC 2 CAB

o) 4 core 4 sqmm 100 RM MC 2 CAB

p) 3 core 25 sqmm 10 RM MC 2 CAB

q) 3 core 16 sqmm 10 RM MC 2 CAB

r) 3 core 10 sqmm 10 RM MC 2 CAB

s) 3 core 6 sqmm 10 RM MC 2 CAB

t) 3 core 4 sqmm 100 RM MC 2 CAB

u) 2 core 6 sqmm 10 RM MC 2 CAB

v) 2 core 4 sqmm 10 RM MC 2 CAB

MC 2 CAB

4.2.2 Copper Conductor Armoured Control Cables : MC 2 CAB

MC 2 CAB

a) 14 C 1.5 Sqmm PVC cable 10 RM MC 2 CAB

b) 10 C 1.5 Sqmm PVC cable 10 RM MC 2 CAB

c) 9 C 1.5 Sqmm PVC cable 10 RM MC 2 CAB

d) 7 C 1.5 Sqmm PVC cable 10 RM MC 2 CAB

e) 5 C 1.5 Sqmm PVC cable 100 RM MC 2 CAB

f) 3 C 1.5 Sqmm PVC cable 100 RM MC 2 CAB

MC 2 CAB

4.30 Cable Termination : MC 2 TERM

MC 2 TERM

MC 2 TERM

MC 2 TERM

4.3.1 Copper conductor armoured cables : MC 2 TERM

MC 2 TERM

a) 4 core 400 Sqmm 2 Nos. MC 2 TERM

b) 4 core 300 Sqmm 2 Nos. MC 2 TERM

c) 4 core 240 Sqmm 2 Nos. MC 2 TERM

d) 4 core 185 sqmm 2 Nos. MC 2 TERM

e) 4 core 150 sqmm 2 Nos. MC 2 TERM

f) 4 core 120 sqmm 2 Nos. MC 2 TERM

g) 4 core 95 sqmm 2 Nos. MC 2 TERM

h) 4 core 70 sqmm 2 Nos. MC 2 TERM

i) 4 core 50 sqmm 2 Nos. MC 2 TERM

Supply and making end termination with brass double compression glands for the following XLPE insulated PVC sheathed, 1100 V grade, Multi-strand copper conductor cable including cost of crimping lugs/ferrules, double compression glands, solder, cable sockets, insulation tap etc complete as required, as per specifications and as per direction of Engineer-in-charge.

LABOUR RATE


j) 4 core 35 sqmm 2 Nos. MC 2 TERM

k) 4 core 25 sqmm 10 Nos. MC 2 TERM

l) 4 core 16 sqmm 8 Nos. MC 2 TERM

m) 4 core 10 sqmm 4 Nos. MC 2 TERM

n) 4 core 6 sqmm 2 Nos. MC 2 TERM

o) 4 core 4 sqmm 2 Nos. MC 2 TERM

p) 3 core 25 sqmm 2 Nos. MC 2 TERM

q) 3 core 16 sqmm 2 Nos. MC 2 TERM

r) 3 core 10 sqmm 2 Nos. MC 2 TERM

s) 3 core 6 sqmm 2 Nos. MC 2 TERM

t) 3 core 4 sqmm 2 Nos. MC 2 TERM

u) 2 core 6 sqmm 2 Nos. MC 2 TERM

v) 2 core 4 sqmm 2 Nos. MC 2 TERM

4.3.2 Copper Conductor PVC Insulated Armoured Control Cables : MC 2 TERM

MC 2 TERM

MC 2 TERM

a) 14 C x 1.5 Sqmm 2 Nos. MC 2 TERM

b) 10 C x 1.5 Sqmm 2 Nos. MC 2 TERM

c) 9 C x 1.5 Sqmm 2 Nos. MC 2 TERM

d) 7 C x 1.5 Sqmm 2 Nos. MC 2 TERM

e) 5 C x 1.5 Sqmm 4 Nos. MC 2 TERM

f) 3 C x 1.5 Sqmm 4 Nos. MC 2 TERM

MC 2 TERM

Notes : MC 2 TERM

MC 2 TERM

4.40 MC 2 CAB

MC 2 CAB

a) 4 C x 185 Sqm, CWZ Cable 10 RM MC 2 CAB

b) 4 C x 150 Sqm, CWZ Cable 10 RM MC 2 CAB

c) 4 C x 120 Sqm, CWZ Cable 10 RM MC 2 CAB

d) 4 C x 95 Sqm, CWZ Cable 10 RM MC 2 CAB

e) 4 C x 70 Sqm, CWZ Cable 10 RM MC 2 CAB

f) 4 C x 50 Sqm, CWZ Cable 10 RM MC 2 CAB

g) 4 C x 35 Sqm, CWZ Cable 10 RM MC 2 CAB

h) 4 C x 25 Sqm, CWZ Cable 10 RM MC 2 CAB

i) 4 C x 16 Sqm, CWZ Cable 200 RM MC 2 CAB

j) 4 C x 10 Sqm, CWZ Cable 10 RM MC 2 CAB

k) 4 C x 6 Sqm, CWZ Cable 10 RM MC 2 CAB

l) 4 C x 4 Sqm, CWZ Cable 10 RM MC 2 CAB

(Single Compression Glands suitable for following armoured cables)

The cable quantities given are approximate and to cover various sizes. The contractor shall measure the cables required and procurement order shall be placed accordingly. The quantities shall be confirmed before start of work.

Supply, installation, testing and commissioning of 1.1 KV grade, Multicore, copper conductor, LSZH outer sheathed, CWZ fire resistant cable (in compliance with BS:6387) of following sizes on surfae of wall/existing cable trays/Mesonary Hume pipe/Duct/Trenches etc., with fixing hardware etc. as required as per specifications and as per direction of Engineer-in-charge.

LABOUR RATE


m) 4 C x 2.5 Sqm, CWZ Cable 10 RM MC 2 CAB

MC 2 CAB

4.50 Cable Trays : MC 2 TRAY

MC 2 TRAY

MC 2 TRAY

MC 2 TRAY

Notes : MC 2 TRAY

MC 2 TRAY

4.5.1 Ladder Type Cable tray : MC 2 TRAY

MC 2 TRAY

a) 900 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

b) 750 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

c) 600 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

d) 450 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

e) 300 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

f) 225 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

g) 100 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

MC 2 TRAY

4.5.2 Perforated Type Cable Tray : MC 2 TRAY

MC 2 TRAY

a) 900 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

b) 750 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

c) 600 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

d) 400 mm x 75 mm x 2.0 mm 50 RM MC 2 TRAY

e) 300 mm x 50 mm x 2.0 mm 50 RM MC 2 TRAY

f) 250 mm x 50 mm x 2.0 mm 10 RM MC 2 TRAY

g) 200 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

h) 150 mm x 75 mm x 2.0 mm 10 RM MC 2 TRAY

i) 100 mm x 75 mm x 2.0 mm 50 RM MC 2 TRAY

MC 2 TRAY

4.5.3 Fibreglass Ladder Type Cable Tray : MC 2 TRAY

MC 2 TRAY

MC 2 TRAY

a) 600 mm wide 10 RM MC 2 TRAY

b) 450 mm wide 10 RM MC 2 TRAY

Supply and installation of ladder type/perforated type cable trays of the following sizes fabricated out of perforated hot dip galvanised MS sheets of minimum 2.0 mm thick to be installed horizontally or vertically. The cable tray shall be complete including cost of supporting Steel/Hangers, bends, elbows, cross, tees, reducers etc as per drawings/site condition and rate shall include cost of anchor fasteners, screws, nuts, bolts and misc. other fixing hardware etc as required, as per specifications and approved Shop drawings.

The cable tray shall be factory built. Bidder shall include in his price, required numbers of Tees, Crosses, Bends, Elbows etc as required as per actual site conditions. Bidder may refer to the drawings for estimation purpose.

Supply & Installation of Ladder type Cable tray of following sizes. The Cable Tray shall be complete including the cost of Anchor fasteners, Hardware, supporting structure etc. as required and as per specifications and approved drawing :

LABOUR RATE


c) 300 mm wide 10 RM MC 2 TRAY

d) 225 mm wide 10 RM MC 2 TRAY

e) 100 mm wide 10 RM MC 2 TRAY

MC 2 TRAY

4.60 Misc. Works Relating to Cabling: MC 2 PIPE

MC 2 PIPE

4.6.1 GI Pipe Installation : MC 2 PIPE

MC 2 PIPE

MC 2 PIPE

MC 2 PIPE

a) 25 mm dia 10 RM MC 2 PIPE

b) 32 mm dia 10 RM MC 2 PIPE

c) 40 mm dia 10 RM MC 2 PIPE

d) 50 mm dia 10 RM MC 2 PIPE

e) 80 mm dia 10 RM MC 2 PIPE

f) 100 mm dia 10 RM MC 2 PIPE

g) 150 mm dia 10 RM MC 2 PIPE

MC 2 PIPE

4.6.2 Flexible Conduits Installation : MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

4.6.2.1 GI flexible conduits : MC 2 PW

MC 2 PW

a) 20 mm dia 100 RM MC 2 PW

b) 25 mm dia 200 RM MC 2 PW

c) 40 mm dia 50 RM MC 2 PW

d) 50 mm dia 50 RM MC 2 PW

MC 2 PW

5.00 WIRING : MC 2 PW

MC 2 PW

5.10 Point Wiring : MC 2 PW

MC 2 PW

The rates for point wiring shall include the circuit wiring. MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

Supply and installation of following sizes of `A' class GI pipe for cable sleeves in recess/ on surface/Ground complete with all accessories pull boxes where ever required, G.I. fish wire, fixing hardware etc. including the chasing of wall/floor, and plastering the chased portion, digging the trench and back filling, making good the damages, sealing of pipe entry etc as required.

Supply and installation of following sizes of GI flexible conduits with all accessories including fixing nipples, couplings and fixing hardware etc as required and as per specifications.

TOTAL OF CABLES, SUB MAINS, CABLE TRAYS CARRIED OVER TO SUMMARY

Circuit wiring means the wiring from DB / Dimmer panel to the first point of circuit through control switch.

LABOUR RATE


MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

5.1.1 Light Points controlled by switch : MC 2 PW

MC 2 PW

a) Single/ First light point con-trolled by a 5Amps switch. 29 Nos. MC 2 PW

MC 2 PW

b) Same as above but loop point 151 Nos. MC 2 PW

MC 2 PW

5.1.2 Light Points controlled directly from DB . MC 2 PW

MC 2 PW

i. Single/ First Point Controlled directly by MCB in DB 6 Nos. MC 2 PW

MC 2 PW

ii. Same as above but loop point. 50 Nos. MC 2 PW

MC 2 PW

5.1.3 Two way points : MC 2 PW

MC 2 PW

a) Light points controlled by 2 Nos 2 way switch. MC 2 PW

MC 2 PW

i) 1 No. MC 2 PW

MC 2 PW

ii) Same as above but loop point. 1 No. MC 2 PW

MC 2 PW

5.1.4 Presence Sensor : MC 2 PW

MC 2 PW

a) 5 Nos. MC 2 PW

5.1.5 6A Socket Points : MC 2 PW

Circuit wiring and subsequent looping shall be done with 2.5 Sqmm, 1100V grade LSZH insulated stranded, copper wires.

The rates of point wiring shall include supply, installation, testing & commissioning of MS conduit with accessories, GI Boxes and required GI flexible conduits with accessories up to the Point, LSZH insulated, stranded, Cu. Wire, switches and sockets (as approved by Engineer-in-charge) etc. as required and as per specification and direction of Engineer-in-charge.

Where the light points are directly controlled from DB (without any local control switches), the quoted rates shall not include the cost of MCBs etc. in the point wiring.

The rates of point wiring shall include earthing of each light, fan, switches, switch plates, boxes and other non current carrying metallic part with 2.5Sqm. Stranded copper, LSZH insulated, stranded, copper wire.

One / first light point controlled by two nos. two way 5 Amps. switch.

Wiring from Presence Sensor to the DB/SwitchBoard/Light fixtures, including providing Presence Sensor as required and as per approved shop drawing (wiring from DB to light points has already been included in subheads 1.1,1.2,1.3 above and not to be considered here).

LABOUR RATE


MC 2 PW

a) 23 Point MC 2 PW

MC 2 PW

5.20 Power Socket Wiring : MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

5.2.1 4 Point MC 2 PW

MC 2 PW


MC 2 PW


MC 2 PW


Wiring for 6A, BS, switched socket outlet including providing 6A, BS, switched, socket outlet as per specification and approved shop drawing.

Power Socket Wiring shall include supply, installation, testing and commissioning of wiring of following points, including, providing conduits of suitable size, its accessories/Hardware, Junction Boxes, LSZH wires, termination of wires, switches, socket outlets, Plug tops etc. as required, as per specification and as approved by Engineer-in-charge.

Wiring for 1 No. BS, 16A, switched socket outlet with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 16A, switched outlet with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 2 Nos. BS, 16A, switched outlet with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos.BS, 16A, switched outlet with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 3 Nos. BS, 16A, switched outlet with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 3 Nos.BS outlet 16A switched with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.


LABOUR RATE



MC 2 PW


MC 2 PW


MC 2 PW


MC 2 PW


MC 2 PW

Wiring for 1 No. BS, 16A, switched outlet in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 16A, switched outlet in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 2 Nos. BS, 16A, switched outlet in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos. BS, 16A, switched outlet in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.


Wiring for 1 No. BS, 16A, switched outlet & 1 No. IP-65 BS outlet 16A switched with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 16A, switched outlet & 1 No. IP-65 BS, 16A, switched outlet with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 1 No. BS, 16A, switched outlet (Spur Outlet) with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 16A, switched outlet (Spur Outlet) with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

LABOUR RATE



MC 2 PW


MC 2 PW

5.2.12 42 Point MC 2 PW

MC 2 PW


MC 2 PW

Wiring for 1 No. BS, 32A, switched outlet in IP-65 enclosure for Water Heater with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 32A, switched outlet in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 2 Nos. Power & Data Pillar (type-1), each consisting of 2 Nos. 6A BS socket, 1 No. 15A Switch and 1 No. RJ-45 Data Outlets in IP-65 enclosure, with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos. Power & Data Pillar (type-1), each consisting of 2 Nos. 6A BS socket with 1 No. 15A Switch and 1 No. RJ-45 Data Outlets in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 4 Nos. Power & Data Pillar (type-1), each consisting of 2 Nos. 6A BS socket with 1 No. 15A Switch and 1 No. RJ-45 Data outlet in IP-65 enclosure, with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 4 Nos. Power & Data Pillar (type-1), each consisting of 2 Nos. 6A BS socket with 1 No. 15A Switch and 1 No. RJ-45 Data outlet in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required.

Wiring for 2 Nos. Power & Data Pillar (type-2), each consisting of 1 No. 6A BS switched socket and 1 No. RJ-45 Data outlets in IP-65 enclosure, with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos. Power & Data Pillar (type-2), each consisting of 1 No. 6A BS switched socket and 1 No. RJ-45 Data outlets in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required.

LABOUR RATE


5.2.14 4 Nos. MC 2 PW

MC 2 PW

5.30 CEE INDUSTRIAL SWITCHED SOCKETS MC 2 PW

MC 2 PW

5.3.1 MC 2 PW

MC 2 PW

a) 16A, 2P+E, CEE, switched socket outlet with plug top (IP-44) 8 Nos. MC 2 PW

b) 1 No. MC 2 PW

c) 1 No. MC 2 PW

MC 2 PW

5.40 ISOLATORS MC 2 DB

MC 2 DB

MC 2 DB

MC 2 DB

a) 16A Double pole isolator 1 No. MC 2 DB

MC 2 DB

b) 16A Four pole isolator 1 No. MC 2 DB

MC 2 DB

c) 40A Four pole isolator 4 Nos. MC 2 DB

MC 2 DB

d) 63A Four pole isolator 1 No. MC 2 DB

MC 2 DB

5.50 M.S. Black Conduits : MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

a) 20 mm dia 20 RM MC 2 PW

Wiring for 1 No. Floor LV tank consisting of 4 Nos. 6A BS switched socket and 2 Nos. RJ-45 Data Outlets in IP-65 enclosure, with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. Floor LV tank consisting of 4 Nos. 6A BS switched socket and 2 Nos. RJ-45 Data outlets in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required.

Supply, installation, testing and commissioning of single phase/three phase, CEE, switched, industrial type plug and socket outlet in IP-65 enclosure including termination, earthing etc. in surface/recessed mounting as required, as per specifications and approved shop drawings (Cabling/Conduiting & wiring shall be paid separately under different items).

16A, 3P+N+E, CEE, switched socket outlet with plug top (IP-44)

16A, 3P+N+E, CEE, switched socket outlet with plug top (IP-65) for water heaters.

Supply, installation, testing and commissioning of isolators in IP-65 enclosures complete with termination in surface/recessed mounting as required.

Supply and installation of following size of MS conduit pipe in recess or on surface including all accessories MS/CI pull/junction boxes, GI fish wire, fixing hardware etc including chasing the walls/floor and plastering the chased portion and making good the damages etc, complete as required and as per specifications.

LABOUR RATE


b) 25 mm dia 20 RM MC 2 PW

c) 32 mm dia 20 RM MC 2 PW

d) 40 mm dia 20 RM MC 2 PW

e) 50 mm dia 20 RM MC 2 PW

MC 2 PW

5.60 Sub-mains Wiring : MC 2 PW

MC 2 PW

MC 2 PW

MC 2 PW

a) 2 x 1.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM MC 2 PW

b) 2 x 2.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM MC 2 PW

c) 2 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire. 20 RM MC 2 PW

d) 2 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM MC 2 PW

e) 4 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM MC 2 PW

f) 4 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM MC 2 PW

g) 2 x 10.0 Sqmm + 1 No. 6.0 Sqmm Copper earth wire 20 RM MC 2 PW

h) 4 x 10.0 Sqmm + 2 Nos. 6.0 Sqmm Copper earth wire 20 RM MC 2 PW

i) 4 x 16.0 Sqmm + 2 Nos. 10.0 Sqmm Copper earth wire 20 RM MC 2 PW

j) 4 x 25.0 Sqmm + 2 Nos. 16.0 Sqmm Copper earth wire 20 RM MC 2 PW

MC 2 PW

Note: MC 2 PW

MC 2 PW

1) MC 2 PW

MC 2 PW

2) MC 2 PW

MC 2 PW

TOTAL OF WIRING CARRIED OVER TO SUMMARY MC 2 PW

6.00 LIGHTING FIXTURES : MC 2 LIGHT

MC 2 LIGHT

MC 2 LIGHT

MC 2 LIGHT

i) 45 Nos. MC 2 LIGHT

MC 2 LIGHT

Supply and drawing of following sizes of LSZH insulated, stranded, copper conductor wires of 650/1100 Volts grade in existing conduit pipe /wire ways including connection /terminations etc as required.

In false ceiling areas the work is to be co-ordinated with respect to interior work and rate for point wiring shall include flexible conduit/fixing nipples/couplers etc from the junction box up to the fitting.

All wires used for circuit / point wiring shall be Low Smoke Zero Halogen (LSZH) wires.

Inspection, receiving, storing, handling, assembling, installation, testing and commissioning of wall /ceiling, surface/ recessed, suspended from down rod, in furniture, fluorescent / incandescent / Halogen lamp fixtures including making connections with PVC insulated stranded copper conductor wires complete including steel supports, suspenders, fixing screws, turn buckles, bolts, nuts (down rods ball and socket arrangement and special channel mounting for industrial fitting/chandelier) etc, as required. The mounting arrangement of lighting fixture shall be as indicated in the approved drawings.

Recessed Downlight 1 x 26 W (Thorn Chalice C 190H 1 X 26 W or Equivalent) (T13)

LABOUR RATE


ii) 14 Nos. MC 2 LIGHT

MC 2 LIGHT

iii) 4 Nos. MC 2 LIGHT

MC 2 LIGHT

iv) 47 Nos. MC 2 LIGHT

MC 2 LIGHT

v) 19 Nos. MC 2 LIGHT

MC 2 LIGHT

vi) 6 Nos. MC 2 LIGHT

MC 2 LIGHT

vii) 2 Nos. MC 2 LIGHT

MC 2 LIGHT

viii) 3 Nos. MC 2 LIGHT

MC 2 LIGHT

ix) 21 Nos. MC 2 LIGHT

MC 2 LIGHT

x) 9 Nos. MC 2 LIGHT

MC 2 LIGHT

xi) 18 Nos. MC 2 LIGHT

MC 2 LIGHT

xii) 4 Nos. MC 2 LIGHT

xiii) 4 Nos. MC 2 LIGHT

MC 2 LIGHT

xiv) 4 Nos. MC 2 LIGHT

MC 2 LIGHT

xv) 5 Nos. MC 2 LIGHT

MC 2 LIGHT

Recessed Downlight 1 x 26 W (Thorn Chalice C 190H 1 X 26 W or Equivalent) (T13) complete with Emergency Lighting Units.

Wall mounted Luminaire with 1 x 28W Fluorescent T5 Lamp water proof IP44 (SITECO Europlex 24W IP44 or Equivalent) (T8)

Recessed Luminaire with 4 x 18W T5 Lamps with Parabolic Louvre (Thorn Omega BS/SB 4 x 18W or Equivalent) (T14)

Recessed Luminaire with 4 x 18W T5 Lamps with Parabolic Louvre (Thorn Omega BS/SB 4 x 18W or Equivalent) (T14) complete with Emergency Lighting Units.

Recessed outside Downlight IP54 (Trilux Downlight IP54 or Equivalent) (T21)

Wall mounted Luminaire with 2 x 35W Fluorescent T5 Lamps with Prismatic Diffuser (Thorn Prisma C 2 x 35 T16CL or Equivalent) (T19)

Wall mounted Luminaire with 2 x 35W Fluorescent T5 Lamps with Prismatic Diffuser (Thorn Prisma C 2 x 35 T16CL or Equivalent) (T19) complete with Emergency Lighting Units.

Recessed Outside Downlight IP44 (Thorn Chalice or Equivalent) (T22)

Recessed Outside Downlight IP44 (C190H 1 x 26W IP44 or Equivalent) (T22) complete with Emergency Lighting Units.

Bulk Head Light Wall Mounted with 2 x 28W TC-DEL Lamp IP-65 (Thorn Dunube 2 x 28W IP65 or Equivalent) (T11)

Surface mounted Industrial Luminaire with 2 x 36W Fluorescent T5 Lamps (Thorn Indus RD 2 x 58W TW or Equivalent) (T6)

Surface mounted Industrial Luminaire with 2 x 36W Fluorescent T5 Lamps (Thorn Indus RD 2 x 58W TW or Equivalent) (T6) complete with Emergency Lighting Units.

CL 90 Bollard 18/24W IP65 Single-S (Siteco DL 102 Bollard Luminaire TC-L 1x18/24W IP67 or equivalent) (T28)

Emergency Exit down Fixture complete with Emergency Lighting Units (Cooper/Crompton or Approved Equivalent).

LABOUR RATE


xvi) 1 No. MC 2 LIGHT

MC 2 LIGHT

MC 2 LIGHT

7.00 EARTHING & LIGHTNING PROTECTION SYSTEM : MC 2 EARTH

7.10 Earthing System: MC 2 EARTH

7.1.1 4 Nos. MC 2 EARTH

MC 2 EARTH

7.1.2 ur Nos. MC 2 EARTH

MC 2 EARTH

7.1.3 ur Nos. MC 2 EARTH

MC 2 EARTH

7.1.4 Earthing Strip/Tape/Cables : MC 2 EARTH

MC 2 EARTH

MC 2 EARTH

MC 2 EARTH

7.1.4.1 G.I. Earthing strip/tape : MC 2 EARTH

MC 2 EARTH

a 50 x 8 mm strip 5 RM MC 2 EARTH

b 50 x 6 mm strip 5 RM MC 2 EARTH

c 40 x 6 mm strip 5 RM MC 2 EARTH

Emergency Exit Up Fixture complete with Emergency Lighting Units (Cooper/Crompton or Approved Equivalent).

TOTAL OF LIGHTING FIXTURES CARRIED OVER TO SUMMARY

Supply, installation, testing and commissioning of copper plate earthing stations making earth pits, earthing with copper earth plate 600 mm x 600 mm x 3.15 mm thick including funnel, charcoal/coke, salt, all earth work. Providing masonry enclosure with 10 mm thick C.I. cover plate having locking arrangement and watering pipe, disconnecting/ testing links etc as per IS –3043 complete as required, as per specifications, drawings and direction of Engineer-in-charge.

Supply, installation, testing and commissioning of GI plate earthing stations making earth pits, earthing with GI earth plate 600 mm x 600 mm x 6.30 mm thick including funnel, charcoal/coke, salt, all earth work. Providing masonry enclosure with 10 mm thick C.I. cover plate having locking arrangement and watering pipe, disconnecting/ testing links etc as per IS–3043 complete as required, as per specifications, drawing and direction of Engineer-in-charge.

Supply, installation, testing and commissioning of GI Pipe earthing stations making earth pits, earthing with GI pipe 4500 mm x 40 mm Dia including funnel, charcoal/coke, salt, all earth work. Providing masonry enclosure with 10 mm thick C.I. cover plate having locking arrangement and watering pipe, disconnecting/ testing links etc as per IS–3043 complete as required as per specifications, drawing and direction of Engineer-in-charge.

Supply, installation, testing and commissioning of following sizes of GI/Tinned Copper strip/tape clamped to walls, cable trays, bus ducts, recess in Ground or surface etc for equipment/ System earthing complete as required including inter connection between length at joints, all fixing accessories saddles, clamps etc and other fixing hardware material as required, as per specifications, detail drawings shall be included for proper installation.

LABOUR RATE


d 32 x 6 mm strip 5 RM MC 2 EARTH

e 25 x 6 mm strip 5 RM MC 2 EARTH

f 25 x 3 mm strip 5 RM MC 2 EARTH

MC 2 EARTH

7.1.4.2 Tinned Copper earthing strip/tape : MC 2 EARTH

MC 2 EARTH

a) 50 x 6 mm 500 RM MC 2 EARTH

b) 32 x 6 mm 100 RM MC 2 EARTH

c) 25 x 6 mm 10 RM MC 2 EARTH

d) 25 x 3 mm 500 RM MC 2 EARTH

7.1.5 MC 2 CAB

MC 2 CAB

a) 1C x 185 Sqm 100 RM MC 2 CAB

MC 2 CAB

b) 1C x 90 Sqm 5 RM MC 2 CAB

MC 2 CAB

c) 1C x 50 Sqm 5 RM MC 2 CAB

MC 2 CAB

d) 1C x 35 Sqm 5 RM MC 2 CAB

MC 2 CAB

e) 1C x 25 Sqm 5 RM MC 2 CAB

MC 2 CAB

7.1.6 MC 2 EARTH

MC 2 EARTH

7.1.6.1 75 x 6 mm tinned, Copper, Earth Bars. MC 2 EARTH

MC 2 EARTH

a) 300 mm 1 No. MC 2 EARTH

b) 500 mm 1 No. MC 2 EARTH

c) 750 mm 1 No. MC 2 EARTH

d) 1000 mm 1 No. MC 2 EARTH

MC 2 EARTH

7.1.6.2 50 x 6 mm tinned, Copper, Earth Bars. MC 2 EARTH

MC 2 EARTH

a) 300 mm 5 Nos. MC 2 EARTH

b) 500 mm 5 Nos. MC 2 EARTH

c) 750 mm 2 Nos. MC 2 EARTH

d) 1000 mm 1 No. MC 2 EARTH

MC 2 EARTH

7.20 Lightning Protection System: MC 2 EARTH

Supply, installation, Termination, testing and commissioning of PVC insulated, stranded copper conductor cable, laid on surface/cable tray/duct/undger ground/Trench etc. as required, as per approved shop drawing, site conditions and as directed by Engineer-in-charge.

Supply, installation, Termination, testing and Commissioning of following sizes Tinned Copper Earth Bars including its supporting/fixing hardware, as per drawings, specifications and as directed by Engineer-in-charge.

LABOUR RATE


MC 2 EARTH


MC 2 EARTH


MC 2 EARTH

7.2.3 Earthing Strip/Wires : MC 2 EARTH

MC 2 EARTH

0.00 MC 2 EARTH

MC 2 EARTH

a) 25 x 3 mm strip 500 RM MC 2 EARTH

MC 2 EARTH

b) 25 x 6 mm strip 100 RM MC 2 EARTH

MC 2 EARTH

c) 32 x 6 mm strip 10 RM MC 2 EARTH

MC 2 EARTH

7.2.4 MC 2 EARTH

MC 2 EARTH

7.2.4.1 75 x 6 mm GI Earth Bars. MC 2 EARTH

MC 2 EARTH




d) 1000 mm 2 Nos. MC 2 EARTH

Supply, installation, testing and commissioning of copper plate earthing stations making earth pits, earthing with copper earth plate 600 mm x 600 mm x 3.15 mm thick including funnel, charcoal/coke, salt, all earth work. Providing masonry enclosure with 10 mm thick C.I. cover plate having locking arrangement and watering pipe, disconnecting/ testing links etc as per IS –3043 complete as required, as per drawings, specifications and direction of Engineer-in-charge.

Supply, installation, testing and commissioning of GI Pipe earthing stations making earth pits, earthing with GI pipe 4500 mm x 40 mm Dia including funnel, charcoal/coke, salt, all earth work. Providing masonry enclosure with 10 mm thick C.I. cover plate having locking arrangement and watering pipe, disconnecting/ testing links etc as per IS–3043 complete as required, as per drawings, specifications and direction of Engineer-in-charge.

Supply, installation, testing and commissioning of following sizes of GI strip/wire clamped to walls, Ductwork, pipe work, Structural steel work, cladding work etc. in recess, in Ground or surface etc for Lightning Protection System complete as required including inter connection, terminations, between length at joints, all fixing accessories saddles, plastic isolator mounting (of 50mmx80mm approx.), Sealing Collars, Sealing Strip, Squared Timber Block (80mmx100mm approx.), clamps, Lugs etc and other fixing hardware material as required for proper installation as per detail drawings, specifications and direction of Engineer-in-charge.

Supply, installation, Termination, testing and Commissioning of following sizes GI Earth Bars including in supporting/fixing hardware, as per drawings, specifications and as directed by Engineer-in-charge.

LABOUR RATE


MC 2 EARTH

7.2.4.2 50 x 6 mm GI Earth Bars. MC 2 EARTH

MC 2 EARTH




d) 1000 mm 2 Nos. MC 2 EARTH

MC 2 EARTH


MC 2 EARTH


MC 2 EARTH

MC 2 EARTH

TEAM BUILDING T B

1.00 LV SWITCHGEAR PANELS & DISTRIBUTION BOARDS: T B PANEL

T B PANEL

LV SWITCHGEAR PANELS : T B PANEL

T B PANEL

T B PANEL

T B PANEL

Important Notes: Common for all Switchboard: T B PANEL

T B PANEL

Supply and fixing of Lightning Arrestor Rod/Lightning Conductor finial made of 25 mm dia, 2.0 mm thick & 300 mm Long GI Tube having single prong at top with 75 mm dia, 6 mm thick Base plate, including connections with roof parapit Lightning protection Conductors, as per detailed drawings and as per direction of Engineer-in-charge.

Supply and fixing of "Earth Test Joints" encased in 200 mm (H) x 150 mm (W) x 100 mm (D) recessed in concrete with removable cover plate as per detailed drawing and as per direction of Engineer-in-charge.

TOTAL OF EARTHING & LIGHTNING PROTECTION SYSTEM CARRIED OVER TO SUMMARY

Design, manufacture, supply, unloading, receiving, storing, handling, installation, testing and commissioning of following LV panels suitable for 400 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, Copper bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of as indicated elsewhere or shown in Single Line Diagram.

LABOUR RATE


1.00 T B PANEL

T B PANEL

2.00 Fault current wherever mentioned shall be Ics value. T B PANEL

T B PANEL

3.00 T B PANEL

T B PANEL

4.00 All feeder doors shall have pad locking arrangement. T B PANEL

T B PANEL

5.00 All TP feeders shall have solid isolable neutral link. T B PANEL

T B PANEL

6.00 T B PANEL

T B PANEL

7.00 All power contactors including NIC shall be of AC3 duty. T B PANEL

T B PANEL

8.00 T B PANEL

9.00 T B PANEL

T B PANEL

10.00 T B PANEL

T B PANEL

11.00 Capacitor shall be super heavy duty type (MPP technology). T B PANEL

T B PANEL

12.00 T B PANEL

T B PANEL

13.00 T B PANEL

T B PANEL

14.00 T B PANEL

T B PANEL

15.00 All CT, PT shall be cast resin. T B PANEL

T B PANEL

The BOQ shall be read inconjunction with general notes, specification and Single Line Diagram. Incase of any discrepancy between specification, BOQ and SLD, the same shall be brought to the notice of Employer before quoting the rates, otherwise stringent condition shall be deemed to have been considered.

All MCCB shall be provided with door interlocked rotary handle with ON/OFF/Trip position indicator, microprocessor based releases for over current, selectable short circuit and instentaneous short circuit protection (settable at site). I/C MCCB shall be provided with E/F release/ protection also.








LABOUR RATE


16.00 All meters are digital type. T B PANEL

T B PANEL

17.00 T B PANEL

T B PANEL

18.00 T B PANEL

T B PANEL

19.00 T B PANEL

T B PANEL

20.00 Bus bar chamber shall be kept at top of the all panels. T B PANEL

T B PANEL

21.00 T B PANEL

T B PANEL

22.00 T B PANEL

T B PANEL

23.00 All indicating light shall be LED type . T B PANEL

T B PANEL

24.00 T B PANEL

T B PANEL

25.00 T B PANEL

T B PANEL

26.00 T B PANEL

T B PANEL

1.10 T B PANEL

T B PANEL

Comprisising of the following: T B PANEL

T B PANEL

a) Incomings: T B PANEL

T B PANEL

T B PANEL

T B PANEL

b) Metering & indication for incoming breakers: T B PANEL

T B PANEL

Incoming breaker shall be provided with T B PANEL

T B PANEL









SDB-EE-TB-03-J06, SDB-EE-TB-04-H09, SDB-EE-TB-08-J19, SDB-EE-TB-09-H21, SDB-EE-TB10-H23, SDB-EE-TB11-J27, SDB-EE-TB15-H36, SDB-EE-TB16-J39

One (1) No.160Amps, 400 V, 36kA TPN MCCB, with ON/OFF/TRIP/ indication lamp and TNC control switch, under voltage & shunt trip release with microprocessor based O/C, S/C & E/F protection etc. complete as required and as per SLD.

LABOUR RATE


i) T B PANEL

T B PANEL

ii) T B PANEL

T B PANEL

iii) One set (3 Nos) phase indication lamp with backup SP MCB. T B PANEL

T B PANEL

Note: T B PANEL

T B PANEL

c) BUS BARS: T B PANEL

T B PANEL

T B PANEL

T B PANEL

d) Outgoing: T B PANEL

T B PANEL

i) Three (3) Nos. 100 A, 36 KA, TPN MCCB. T B PANEL

T B PANEL

8 Set T B PANEL

T B PANEL

1.20 T B PANEL

T B PANEL

Comprisising of the following: T B PANEL

T B PANEL

a) Incomings: T B PANEL

T B PANEL

T B PANEL

T B PANEL

b) Metering & indication for incoming breakers: T B PANEL

T B PANEL

Incoming breaker shall be provided with T B PANEL

T B PANEL

i) T B PANEL

T B PANEL

One (1) No. Digital Multifunction meter with RS-485 port suitable for measurement of voltage, currents and Frequency (ELF 3259 of 'Conzerv' make or equivalent).



200Amp., 36kA, TPN+E, Copper Bus bar with colour coded, heat shrinkable sleeves (with 100% neutral). Earth Bus shall be of 32 x 6 mm copper.

SDB-EE-TB-03-J06, SDB-EE-TB-04-H09, SDB-EE-TB-08-J19, SDB-EE-TB-09-H21, SDB-EE-TB10-H23, SDB-EE-TB11-J27, SDB-EE-TB15-H36, SDB-EE-TB16-J39 described as above (from a to d) and as per SLD

SDB-EE-TB-01-H01, SDB-EE-TB-02-G04, SDB-EE-TB-05-G13, SDB-EE-TB-06-J13, SDB-EE-TB07-G16, SDB-EE-TB12-G29, SDB-EE-TB13-J32, SDB-EE-TB14-G32, SDB-EE-TB17-G41, SDB-EE-TB18-G44

One (1) No.100Amps, 400 V, 36kA TPN MCCB, with ON/OFF/TRIP/ indication lamp and TNC control switch, under voltage & shunt trip release with microprocessor based O/C, S/C & E/F protection etc. complete as required and as per SLD.


LABOUR RATE


ii) T B PANEL

T B PANEL

iii) One set (3 Nos) phase indication lamp with backup SP MCB. T B PANEL

T B PANEL

Note: T B PANEL

T B PANEL

c) BUS BARS: T B PANEL

T B PANEL

T B PANEL

T B PANEL

d) Outgoing: T B PANEL

T B PANEL

i) Three (3) Nos. 100 A, 36 KA, TPN MCCB. T B PANEL

T B PANEL

10 Set T B PANEL

T B PANEL

1.30 FINAL DISTRIBUTION BOARDS T B PANEL

T B PANEL

T B PANEL

T B PANEL

1.3.1 DB-EE-TB01-G01, DB-EE-TB18-G44 : T B PANEL

T B PANEL

Incomer: T B PANEL

- 125A TPN MCCB. T B PANEL

T B PANEL

Busbar : T B PANEL

- 150A 4P Cu. Busbar T B PANEL

T B PANEL

Outgoing – (10KA) comprising T B PANEL

T B PANEL

Section-1 T B PANEL

- One (1) no. 32A 3 Phase RCD (100 mA). T B PANEL

T B PANEL




SDB-EE-TB-01-H01, SDB-EE-TB-02-G04, SDB-EE-TB-05-G13, SDB-EE-TB-06-J13, SDB-EE-TB07-G16, SDB-EE-TB12-G29, SDB-EE-TB13-J32, SDB-EE-TB14-G32, SDB-EE-TB17-G41, SDB-EE-TB18-G44 described as above (from a to d) and as per SLD

Design, manufacture, supply, installation (recessed/ surface), testing and commissioning of following switch fuse Unit/ MCCB/MCB type distribution boards as per drawings & specifications fabricated out of 14 SWG, CRCA sheet steel in compartmentalised design as per specification and drawings. The surface distribution boards shall be mounted on 50 x 50 x 6 MS angle frame work grounted to floor/ walls. The rate includes the angle iron frame, support, painting, numbering, earthing etc as required.

LABOUR RATE


- Twenty Four (24) nos. 10A SP MCB. T B PANEL

T B PANEL

Section-2 Part-1 T B PANEL

T B PANEL

- One (1) no. 63A, 3 Phase, RCD (30 mA). T B PANEL

T B PANEL

- Four (4) nos. 6A SP MCB. T B PANEL

T B PANEL

- Eight (8) nos. 16A SP MCB. T B PANEL

T B PANEL

- Three (3) nos. 16A TPN MCB. T B PANEL

T B PANEL

- One (1) nos. 32A TPN MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL

- Nine (9) nos. 6A SP MCB. T B PANEL

T B PANEL

- Six (6) nos. 16A SP MCB. T B PANEL

T B PANEL

- Two (2) nos. 16A TPN MCB. T B PANEL

T B PANEL


T B PANEL

- 2 Set T B PANEL

T B PANEL

T B PANEL

Incomer: T B PANEL


T B PANEL

Busbar : T B PANEL


T B PANEL


T B PANEL

Section-1 T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


DB-EE-TB01-G01, DB-EE-TB18-G44 as described above and as per DB chart.

DB-EE-TB02-G05, DB-EE-TB07-G17, DB-EE-TB12-G28, DB-EE-TB17-G40 :

LABOUR RATE


T B PANEL


T B PANEL


T B PANEL

- One (1) no. 32A TPN MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL


T B PANEL

- Seven (7) nos. 16A SP MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL

- 4 Set T B PANEL

T B PANEL

1.3.3 DB-EE-TB03-J07 : T B PANEL

T B PANEL

Incomer: T B PANEL

T B PANEL


T B PANEL

Busbar : T B PANEL

T B PANEL


T B PANEL


T B PANEL

Section-1 T B PANEL

T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL

- Five (5) nos. 6A SP MCB. T B PANEL

T B PANEL


T B PANEL

DB-EE-TB02-G05, DB-EE-TB07-G17, DB-EE-TB12-G28, DB-EE-TB17-G40 as described above and as per DB chart.

LABOUR RATE



T B PANEL


T B PANEL


T B PANEL


T B PANEL

- Eleven (11) nos. 6A SP MCB. T B PANEL

T B PANEL

- Thirteen (13) nos. 16A SP MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL

- DB-EE-TB03-J07 as described above and as per DB chart. 1 Set T B PANEL

T B PANEL

1.3.4 DB-EE-TB04-H10, DB-EE-TB015-H35 : T B PANEL

T B PANEL

Incomer: T B PANEL

T B PANEL

- 125A TPN MCB. T B PANEL

T B PANEL

Busbar : T B PANEL

T B PANEL


T B PANEL


T B PANEL

Section-1 T B PANEL

T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL

- Three (3) nos. 6A SP MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL


T B PANEL

LABOUR RATE



T B PANEL


T B PANEL


T B PANEL

- Fourteen (14) nos. 16A SP MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL

- 2 Set T B PANEL

T B PANEL

1.3.5 DB-EE-TB05-G12, DB-EE-TB14-G33 : T B PANEL

T B PANEL

Incomer: T B PANEL

T B PANEL

- 125A TP MCCB. T B PANEL

T B PANEL

Busbar : T B PANEL

T B PANEL


T B PANEL


T B PANEL

Section-1 T B PANEL

T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL

DB-EE-TB04-H10, DB-EE-TB015-H35 as described above and as per DB chart.

LABOUR RATE



T B PANEL


T B PANEL


T B PANEL


T B PANEL

- 2 Set T B PANEL

T B PANEL

1.3.6 DB-EE-TB06-J14, DB-EE-TB13-J31 : T B PANEL

T B PANEL

Incomer: T B PANEL

T B PANEL


T B PANEL

Busbar : T B PANEL

T B PANEL


T B PANEL


T B PANEL

Section-1 T B PANEL

T B PANEL


T B PANEL

- Twenty Seven (27) nos. 10A SP MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL

- Four (4) nos. 16A TPN MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL

Two (2) nos. 32A TPN MCB. T B PANEL

T B PANEL

DB-EE-TB05-G12, DB-EE-TB14-G33 as described above and as per DB chart.

LABOUR RATE


- 2 Set T B PANEL

1.3.7 DB-EE-TB08-J18, DB-EE-TB11-J27, DB-EE-TB16-J38 : T B PANEL

T B PANEL

Incomer: T B PANEL


T B PANEL

Busbar : T B PANEL


T B PANEL


T B PANEL

Section-1 T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL

- Five (5) nos. 6A SP MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL

- 3 Set T B PANEL

T B PANEL

1.3.8 DB-EE-TB09-H22, DB-EE-TB10-H23, DB-EE-TB12-G28 : T B PANEL

T B PANEL

Incomer: T B PANEL


T B PANEL

DB-EE-TB06-J14, DB-EE-TB13-J31 as described above and as per DB chart.

DB-EE-TB08-J18, DB-EE-TB11-J27, DB-EE-TB16-J38 as described above and as per DB chart.

LABOUR RATE


Busbar : T B PANEL


T B PANEL


T B PANEL

Section-1 T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL

- Three (3) nos. 6A SP MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL


T B PANEL


T B PANEL

- Twelve (12) nos. 6A SP MCB. T B PANEL

T B PANEL

- Twelve (12) nos. 16A SP MCB. T B PANEL

T B PANEL


T B PANEL


T B PANEL

- 3 Set T B PANEL

T B PANEL

T B PANEL

2.00 CABLES, SUB MAINS & CABLE TRAYS : T B CAB

T B CAB

2.10 Cables in Under Ground Installations : T B CAB

T B CAB

T B CAB

T B CAB

DB-EE-TB09-H22, DB-EE-TB10-H23, DB-EE-TB12-G28 as described above and as per DB chart.



LABOUR RATE


2.1.1 T B CAB

T B CAB

a) 4 core 150 sqmm 10 RM T B CAB

b) 4 core 120 sqmm 10 RM T B CAB

c) 4 core 95 sqmm 10 RM T B CAB

d) 4 core 70 sqmm 10 RM T B CAB

e) 4 core 50 sqmm 10 RM T B CAB

f) 4 core 35 sqmm 10 RM T B CAB

g) 4 core 25 sqmm 10 RM T B CAB

T B CAB

2.20 Cables on Racks / Pipes / Ducts / Wireways/Cable Trays : T B CAB

T B CAB

T B CAB

T B CAB

2.2.1 Copper Conductor Armoured Cables : T B CAB

T B CAB

a) 4 core 150 sqmm 10 RM T B CAB

b) 4 core 120 sqmm 50 RM T B CAB

c) 4 core 95 sqmm 10 RM T B CAB

d) 4 core 70 sqmm 10 RM T B CAB

e) 4 core 50 sqmm 10 RM T B CAB

f) 4 core 35 sqmm 10 RM T B CAB

g) 4 core 25 sqmm 100 RM T B CAB

h) 4 core 16 sqmm 250 RM T B CAB

i) 4 core 10 sqmm 900 RM T B CAB

j) 4 core 6 sqmm 450 RM T B CAB

k) 4 core 4 sqmm 1,600 RM T B CAB

l) 3 core 25 sqmm 10 RM T B CAB

m) 3 core 16 sqmm 10 RM T B CAB

n) 3 core 10 sqmm 10 RM T B CAB

o) 3 core 6 sqmm 10 RM T B CAB

p) 3 core 4 sqmm 10 RM T B CAB

q) 2 core 6 sqmm 10 RM T B CAB

r) 2 core 4 sqmm 10 RM T B CAB

2.2.2 Copper Conductor Armoured Control Cables : T B CAB

T B CAB

a) 14 C 1.5 Sqmm PVC cable 10 RM T B CAB

b) 10 C 1.5 Sqmm PVC cable 10 RM T B CAB

c) 9 C 1.5 Sqmm PVC cable 10 RM T B CAB

d) 7 C 1.5 Sqmm PVC cable 10 RM T B CAB

e) 5 C 1.5 Sqmm PVC cable 10 RM T B CAB

f) 3 C 1.5 Sqmm PVC cable 10 RM T B CAB



LABOUR RATE


T B CAB

2.30 Cable Termination : T B TERM

T B TERM

T B TERM

T B TERM

2.3.1 Copper conductor armoured cables : T B TERM

T B TERM

a) 4 core 150 sqmm 2 Nos. T B TERM

b) 4 core 120 sqmm 2 Nos. T B TERM

c) 4 core 95 sqmm 2 Nos. T B TERM

d) 4 core 70 sqmm 2 Nos. T B TERM

e) 4 core 50 sqmm 2 Nos. T B TERM

f) 4 core 35 sqmm 2 Nos. T B TERM

g) 4 core 25 sqmm 6 Nos. T B TERM

h) 4 core 16 sqmm 30 Nos. T B TERM

i) 4 core 10 sqmm 84 Nos. T B TERM

j) 4 core 6 sqmm 60 Nos. T B TERM

k) 4 core 4 sqmm 156 Nos. T B TERM

l) 3 core 25 sqmm 2 Nos. T B TERM

m) 3 core 16 sqmm 2 Nos. T B TERM

n) 3 core 10 sqmm 2 Nos. T B TERM

o) 3 core 6 sqmm 2 Nos. T B TERM

p) 3 core 4 sqmm 2 Nos. T B TERM

q) 2 core 6 sqmm 2 Nos. T B TERM

r) 2 core 4 sqmm 2 Nos. T B TERM

T B TERM

2.3.2 Copper Conductor PVC Insulated Armoured Control Cables : T B TERM

T B TERM

T B TERM

a) 14 C x 1.5 Sqmm 2 Nos. T B TERM

b) 10 C x 1.5 Sqmm 2 Nos. T B TERM

c) 9 C x 1.5 Sqmm 2 Nos. T B TERM

d) 7 C x 1.5 Sqmm 2 Nos. T B TERM

e) 5 C x 1.5 Sqmm 2 Nos. T B TERM

f) 3 C x 1.5 Sqmm 2 Nos. T B TERM

T B TERM

Notes: T B TERM

T B CAB




LABOUR RATE


2.40 T B CAB

T B CAB

a) 4 C x 185 Sqm, CWZ Cable 5 RM T B CAB

b) 4 C x 150 Sqm, CWZ Cable 5 RM T B CAB

c) 4 C x 120 Sqm, CWZ Cable 5 RM T B CAB

d) 4 C x 95 Sqm, CWZ Cable 5 RM T B CAB

e) 4 C x 70 Sqm, CWZ Cable 5 RM T B CAB

f) 4 C x 50 Sqm, CWZ Cable 5 RM T B CAB

g) 4 C x 35 Sqm, CWZ Cable 5 RM T B CAB

h) 4 C x 25 Sqm, CWZ Cable 5 RM T B CAB

i) 4 C x 16 Sqm, CWZ Cable 5 RM T B CAB

j) 4 C x 10 Sqm, CWZ Cable 5 RM T B CAB

k) 4 C x 6 Sqm, CWZ Cable 5 RM T B CAB

l) 4 C x 4 Sqm, CWZ Cable 5 RM T B CAB

m) 4 C x 2.5 Sqm, CWZ Cable 5 RM T B CAB

T B CAB

2.50 Cable Trays : T B TRAY

T B TRAY

T B TRAY

T B TRAY

Notes: T B TRAY

T B TRAY

2.5.1 Ladder Type Cable tray : T B TRAY

T B TRAY

a) 900 mm x 75 mm x 2.0 mm 5 RM T B TRAY

b) 750 mm x 75 mm x 2.0 mm 5 RM T B TRAY

c) 600 mm x 75 mm x 2.0 mm 5 RM T B TRAY

d) 450 mm x 75 mm x 2.0 mm 5 RM T B TRAY

e) 300 mm x 75 mm x 2.0 mm 5 RM T B TRAY

f) 225 mm x 75 mm x 2.0 mm 5 RM T B TRAY

g) 100 mm x 75 mm x 2.0 mm 5 RM T B TRAY

T B TRAY

2.5.2 Perforated Type Cable Tray : T B TRAY

Supply, installation, testing and commissioning of 1.1 KV grade, Multicore, copper conductor, LSZH outer sheathed, CWZ fire resistant cable (in compliance with BS : 6387) of following sizes on surfae of wall/existing cable trays/Mesonary Hume pipe/Duct/Trenches etc., with fixing hardware etc. as required as per specifications and as per direction of Engineer-in-charge.



LABOUR RATE


T B TRAY

a) 750 mm x 75 mm x 2.0 mm 10 RM T B TRAY

b) 600 mm x 75 mm x 2.0 mm 10 RM T B TRAY

c) 500 mm x 75 mm x 2.0 mm 10 RM T B TRAY

d) 400 mm x 75 mm x 2.0 mm 10 RM T B TRAY

e) 300 mm x 50 mm x 2.0 mm 10 RM T B TRAY

f) 250 mm x 50 mm x 2.0 mm 10 RM T B TRAY

g) 200 mm x 75 mm x 2.0 mm 800 RM T B TRAY

h) 150 mm x 75 mm x 2.0 mm 10 RM T B TRAY

i) 100 mm x 75 mm x 2.0 mm 10 RM T B TRAY

T B TRAY

2.5.3 Fibreglass Ladder Type Cable Tray : T B TRAY

T B TRAY

T B TRAY

a) 600 mm wide 5 RM T B TRAY

b) 450 mm wide 5 RM T B TRAY

c) 300 mm wide 5 RM T B TRAY

d) 225 mm wide 5 RM T B TRAY

e) 100 mm wide 5 RM T B TRAY

T B TRAY

2.60 Misc. Works Relating to Cabling: T B PIPE

T B PIPE

2.6.1 GI Pipe Installation : T B PIPE

T B PIPE

T B PIPE

T B PIPE

a) 25 mm dia 10 RM T B PIPE

b) 32 mm dia 10 RM T B PIPE

c) 40 mm dia 10 RM T B PIPE

d) 50 mm dia 10 RM T B PIPE

e) 80 mm dia 10 RM T B PIPE

f) 100 mm dia 10 RM T B PIPE

g) 150 mm dia 10 RM T B PIPE

T B PIPE

2.6.2 Flexible Conduits Installation : T B PW

T B PW

T B PW

T B PW




LABOUR RATE


2.6.2.1 GI flexible conduits : T B PW

a) 20 mm dia 100 RM T B PW

b) 25 mm dia 100 RM T B PW

c) 40 mm dia 100 RM T B PW

d) 50 mm dia 100 RM T B PW

T B PW

3.00 WIRING : T B PW

T B PW

3.10 Point Wiring : T B PW

T B PW

The rates for point wiring shall include the circuit wiring. T B PW

T B PW

T B PW

T B PW

T B PW

T B PW

T B PW

T B PW

T B PW

T B PW

T B PW

T B PW

3.1.1 Light Points controlled by switch : T B PW

T B PW

a) Single/ First light point con-trolled by a 5Amps switch. 341 No. T B PW

T B PW

b) Same as above but loop point 979 No. T B PW

T B PW

3.1.2 Light Points controlled directly from DB T B PW

T B PW

i. Single/ First Point Controlled directly by MCB in DB 4 Nos. T B PW

T B PW

ii. Same as above but loop point. 35 Nos. T B PW

T B PW

3.1.3 Light points controlled by Two Way Switch : T B PW




The rates of point wiring shall include supply, installation, testing & commissioning of MS conduit with accessories, GI Boxes and required GI flexible conduits with accessories up to the Point, LSZH insulated, stranded, Cu. Wire etc. as required and as per specification, Tender Drawing and direction of Engineer-in-charge.


The rates of point wiring shall include earthing of each light, fan, switches, switch plates, boxes and other non current carrying metallic part with 2.5 Sqm. Stranded copper, LSZH insulated, stranded, copper wire.

LABOUR RATE


T B PW

i) 86 Nos. T B PW

T B PW

ii) Same as above but loop point. 277 Nos. T B PW

T B PW

3.1.4 Light points controlled by Twilight Switch : T B PW

T B PW

i) One / first light point controlled by Twilight switch. 18 Nos. T B PW

T B PW


T B PW

3.1.5 Light points controlled by Push Buttons : T B PW

T B PW

i) Three light points controlled by One Push Button. 1 Nos. T B PW

T B PW

ii) Four light points controlled by One Push Button. 2 Nos. T B PW

T B PW

iii) Five light points controlled by One Push Button. 2 Nos. T B PW

T B PW

iv) Six light points controlled by One Push Button. 6 Nos. T B PW

T B PW

v) Eight light points controlled by One Push Button. 4 Nos. T B PW

T B PW

vi) Five light points controlled by Two Push Buttons. 3 Nos. T B PW

T B PW

vii) Five light points controlled by Three Push Buttons. 4 Nos. T B PW

T B PW

viii) Fifteen light points controlled by Three Push Buttons. 4 Nos. T B PW

T B PW

ix) Sixteen light points controlled by Three Push Buttons. 4 Nos. T B PW

T B PW

ix) Twenty light points controlled by Three Push Buttons. 4 Nos. T B PW

T B PW

3.1.6 Presence Sensor : T B PW

T B PW

a) 4 Nos. T B PW

T B PW

3.1.7 6A Socket Points : T B PW

T B PW

a) 323 Point T B PW

T B PW

3.1.8 FCU Points controlled by 6A Switch : T B PW


Wiring from Presence Sensor to the DB/SwitchBoard/Light fixtures, including providing Presence Sensor as required and as per approved shop drawing (wiring from DB to light points has already been included in subheads 8.1.1, 8.1.2, 8.1.3, 8.1.4, 8.1.5 above and not to be considered here).


LABOUR RATE


T B PW

i) 94 Nos. T B PW

T B PW


T B PW

3.20 Power Socket Wiring : T B PW

T B PW

0.00 T B PW

T B PW

3.2.1 1 Point T B PW

T B PW



T B PW


T B PW

One / first light point controlled by 6A, BS, switched socket outlet including providing 6A, BS, switched, socket outlet.

Power Socket Wiring shall include supply, installation, testing and commissioning of wiring of following points, including, providing conduits of suitable size, its accessories/Hardware, Junction Boxes, LSZH wires, termination of wires, switches, socket outlets, Plug tops etc. as required and as per specification.

Wiring for 1 No. BS, 16A, switched socket outlet with 4.0 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 16A, switched outlet with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 2 Nos. BS, 16A, switched outlet with 4.0 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos. BS, 16A, switched outlet with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.



LABOUR RATE



T B PW


T B PW


T B PW


T B PW


T B PW

Wiring for 2 Nos. BS, 16A, switched outlets and 1 No. 16A DP Isolators in IP-65 enclosure with 4.0 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 No. BS, 16A, switched outlets and 1 No. 16A DP Isolator in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 2 Nos. BS, 16A, switched outlets and 2 Nos. 16A DP Isolators in IP-65 enclosure with 4.0 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos. BS, 16A, switched outlets and 2 Nos. 16A DP Isolators in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 4 Nos. BS, 16A, switched outlets and 1 No. 16A DP Isolator in IP-65 enclosure with 4.0 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 4 Nos. BS, 16A, switched outlets and 1 No. 16A DP Isolator in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 2 Nos. 16A DP Isolators in IP-65 enclosure with 4.0 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos. 16A DP Isolator in IP-65 enclosure with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.


LABOUR RATE



T B PW


T B PW

3.2.12 206 Nos. T B PW

3.30 CEE INDUSTRIAL SWITCHED SOCKETS T B PW

T B PW

3.3.1 T B PW

T B PW

a) 18 No. T B PW

T B PW

3.40 ISOLATORS T B DB

T B DB


Wiring for 1 No. Power & Data Pillar (consisting of 1 No. 6A BS socket with 1 No. 6A Switch and 1 No. RJ-45 Data outlet in IP-65 enclosure) and 1 No. Power & TV Pillar (consisting of 1 No. 6A BS socket with 1 No. 6A Switch and 1 No. RJ-11 TV outlet in IP-65 enclosure) with 2.5 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. 6A BS socket with 1 No. 6A Switch and 1 No. RJ-45 Data outlet in IP-65 enclosure and 1 No. Power & TV Pillar, consisting of 1 No. 6A BS socket with 1 No. 6A Switch and 1 No. RJ-11 TV outlet in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required.

Wiring for 1 No. Floor LV tank consisting of 4 Nos. 6A BS switched socket and 2 Nos. RJ-45 Data Outlets in IP-65 enclosure, with 2.5 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. Floor LV tank consisting of 4 Nos. 6A BS switched socket and 2 Nos. RJ-45 Data outlets in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required.


32A, 3P+N+E, CEE, switched socket outlet with plug top (IP-44).

LABOUR RATE


T B DB

T B DB

a) 16A Four pole isolator 78 Nos. T B DB

T B DB

b) 32A Four pole isolator 18 Nos. T B DB

T B DB

3.50 M.S. Black Conduits : T B PW

T B PW

. T B PW

T B PW

a) 20 mm dia 20 RM T B PW

b) 25 mm dia 20 RM T B PW

c) 32 mm dia 20 RM T B PW

d) 40 mm dia 20 RM T B PW

e) 50 mm dia 20 RM T B PW

T B PW

3.60 Sub-mains Wiring : T B PW

T B PW

T B PW

T B PW

a) 2 x 1.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM T B PW

b) 2 x 2.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM T B PW

c) 2 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire. 20 RM T B PW

d) 2 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM T B PW

e) 4 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM T B PW

f) 4 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM T B PW

g) 2 x 10.0 Sqmm + 1 No. 6.0 Sqmm Copper earth wire 20 RM T B PW

h) 4 x 10.0 Sqmm + 2 Nos. 6.0 Sqmm Copper earth wire 20 RM T B PW

i) 4 x 16.0 Sqmm + 2 Nos. 10.0 Sqmm Copper earth wire 20 RM T B PW

j) 4 x 25.0 Sqmm + 2 Nos. 16.0 Sqmm Copper earth wire 20 RM T B PW

Note: T B PW

T B PW

1) T B PW

T B PW

2) T B PW

T B PW

TOTAL OF WIRING CARRIED OVER TO SUMMARY T B PW






LABOUR RATE


4.00 LIGHTING FIXTURES : T B LIGHT

T B LIGHT

T B LIGHT

T B LIGHT

1.00 87 Set T B LIGHT

T B LIGHT


T B LIGHT

3.00 ur Set T B LIGHT

T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT


Surface mounted Industrial Luminaire with 1x36W Fluorescent T5 Lamps (Thorn Indus RD 1x36W TW or Equivalent) (T5).

Surface mounted Industrial Luminaire with 1x36W Fluorescent T5 Lamps (Thorn Indus RD 1x36W TW or Equivalent) (T5) complete with emergency lighting units.



Wall mounted Luminaire with 1 x 28W Fluorescent T5 Lamp waterproof IP44 (Siteco Europlex 24W IP44 or Equivalent) (T8).

Wall mounted Luminaire with 1 x 28W Fluorescent T5 Lamp waterproof IP44 (Siteco Europlex 24W IP44 or Equivalent) (T8) complete with emergency lighting units.

Recessed Downlight 1x26W (Thorn Chalice C 190H 1x26W or Equivalent) (T13)

Recessed Downlight 1x26W (Thorn Chalice C 190H 1x26W or Equivalent) (T13) complete with emergency lighting units.


Recessed Luminaire with 4 x 18W T5 Lamps with Parabolic Louvre (Thorn Omega BS/SB 4 x 18W or Equivalent) (T14) complete with emergency lighting units.

LABOUR RATE



T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT


T B LIGHT

T B LIGHT

5.00 EARTHING & LIGHTNING PROTECTION SYSTEM : T B EARTH

T B EARTH

5.10 Earthing System: T B EARTH

T B EARTH

5.1.1 2 Nos. T B EARTH

T B EARTH


T B EARTH


Recessed outside Downlight IP54 (Trilux Downlight IP54 or Equivalent) (T21) complete with emergency lighting units.

Recessed Luminaire 2 x 58W IP65 (Thorn Duopre 2 x 58W T26 H2F or Equivalent) (T23).

Recessed Luminaire 2 x 58W IP65 (Thorn Duopre 2 x 58W T26 H2F or Equivalent) (T23) complete with emergency lighting units.

Emergency Exit Up Fixture (Cooper/Crompton or Equivalent) complete with emergency lighting units.

Emergency Exit Down Fixture (Cooper/Crompton or Equivalent) complete with emergency lighting units.

Emergency Exit Left Fixture (Cooper/Crompton or Equivalent) complete with emergency lighting units.

Emergency Exit Right Fixture (Cooper/Crompton or Equivalent) complete with emergency lighting units.




LABOUR RATE



T B EARTH

5.1.4 Earthing Strip/Tape/Cables : T B EARTH

T B EARTH

0.00 T B EARTH

T B EARTH

5.1.4.1 G.I. Earthing strip/tape : T B EARTH

T B EARTH

a 75 x 6 mm strip 10 RM T B EARTH

b 50 x 6 mm strip 10 RM T B EARTH

c 40 x 6 mm strip 100 RM T B EARTH

d 32 x 6 mm strip 100 RM T B EARTH

e 25 x 6 mm strip 100 RM T B EARTH

f 25 x 3 mm strip 1,500 RM T B EARTH

T B EARTH

5.1.4.2 Tinned Copper earthing strip/tape : T B EARTH

T B EARTH

a) 50 x 6 mm 10 RM T B EARTH

b) 32 x 6 mm 10 RM T B EARTH

c) 25 x 6 mm 10 RM T B EARTH

d) 25 x 3 mm 10 RM T B EARTH

T B EARTH

5.1.5 T B CAB

T B CAB

a) 1C x 240 Sqm 10 RM T B CAB

T B CAB

b) 1C x 185 Sqm 10 RM T B CAB

T B CAB

c) 1C x 90 Sqm 100 RM T B CAB




LABOUR RATE


T B CAB

d) 1C x 50 Sqm 100 RM T B CAB

T B CAB

5.1.6 T B EARTH

T B EARTH

5.1.6.1 75 x 6 mm GI Earth Bars. T B EARTH

T B EARTH

a) 300 mm 1 No. T B EARTH

b) 500 mm 1 Nos. T B EARTH

c) 750 mm 1 Nos. T B EARTH

d) 1000 mm 1 No. T B EARTH

T B EARTH


T B EARTH

a) 300 mm 2 Nos. T B EARTH



d) 1000 mm 2 Nos. T B EARTH

T B EARTH

5.20 Lightning Protection System: T B EARTH

T B EARTH


T B EARTH


T B EARTH

5.2.3 Earthing Strip/Wires : T B EARTH

T B EARTH

Supply, installation, Termination, testing and Commissioning of following sizes GI Earth Bars including its supporting/fixing hardware, as per drawings, specifications and as directed by Engineer-in-charge.



LABOUR RATE


T B EARTH

T B EARTH

a) 25 x 3 mm strip 2,400 RM T B EARTH

T B EARTH

b) 25 x 6 mm strip 1,000 RM T B EARTH

T B EARTH

c) 32 x 6 mm strip 10 RM T B EARTH

T B EARTH

5.2.4 T B EARTH

T B EARTH


T B EARTH





T B EARTH


T B EARTH





T B EARTH


T B EARTH


T B EARTH





LABOUR RATE


T B EARTH

MEDICAL CENTER MC

1.00 FINAL DISTRIBUTION BOARDS MC PANEL

MC PANEL

MC PANEL

MC PANEL

1.10 SDB-MC00-D01 : MC PANEL

MC PANEL

Incomer: MC PANEL

MC PANEL

- 100A TPN MCB Isolator. MC PANEL

MC PANEL

Busbar : MC PANEL

MC PANEL

- 150A 4P Cu. Busbar MC PANEL

MC PANEL

Outgoing – (10KA) comprising MC PANEL

MC PANEL

Section-1 MC PANEL

MC PANEL

- One (1) no. 32A 3 Phase RCD (100 mA). MC PANEL

MC PANEL

- Twelve (12) nos. 10A SP MCB. MC PANEL

MC PANEL

Section-2 MC PANEL

MC PANEL

- One (1) no. 63A, 3 Phase, RCD (30 mA). MC PANEL

MC PANEL

- Three (3) nos. 16A SP MCB. MC PANEL

MC PANEL

- Thirteen (13) nos. 16A TPN MCB. MC PANEL

MC PANEL

- Six (6) nos. 32A TPN MCB. MC PANEL

MC PANEL

SDB-MC00-D01 as described above and as per DB chart. 1 Set MC PANEL

MC PANEL

1.20 DB-EE-MC00-B04 : MC PANEL

MC PANEL

Incomer: MC PANEL

MC PANEL



LABOUR RATE


- 100A TPN MCB Isolator. MC PANEL

MC PANEL

Busbar : MC PANEL

MC PANEL

- 150A 4P Cu. Busbar MC PANEL

MC PANEL

Outgoing – (10KA) comprising MC PANEL

MC PANEL

Section-1 MC PANEL

MC PANEL

- One (1) no. 32A 3 Phase RCD (100 mA). MC PANEL

MC PANEL

- Eighteen (18) nos. 10A SP MCB. MC PANEL

MC PANEL

- Space for installation of three(3) Nos. SP MCB MC PANEL

MC PANEL

Section-2 MC PANEL

MC PANEL

- One (1) no. 63A, 3 Phase, RCD (30 mA). MC PANEL

MC PANEL

- Thirteen (13) nos. 16A SP MCB. MC PANEL

MC PANEL

- Two (2) nos. 16A TPN MCB. MC PANEL

MC PANEL

- Space for installation of eight (8) Nos. SP MCB MC PANEL

MC PANEL

DB-EE-MC00-B04 as described above and as per DB chart. 1 Set MC PANEL

MC PANEL

MC PANEL

2.00 CABLES, SUB MAINS & CABLE TRAYS : MC CAB

MC CAB

2.10 Cables in Under Ground Installations : MC CAB

MC CAB

MC CAB

MC CAB

2.1.1 MC CAB

MC CAB

a) 4 core 150 sqmm 10 RM MC CAB

b) 4 core 120 sqmm 10 RM MC CAB

c) 4 core 95 sqmm 10 RM MC CAB

d) 4 core 70 sqmm 10 RM MC CAB

TOTAL OF FINAL DISTRIBUTION BOARDS CARRIED OVER TO SUMMARY



LABOUR RATE


e) 4 core 50 sqmm 10 RM MC CAB

f) 4 core 35 sqmm 10 RM MC CAB

g) 4 core 25 sqmm 10 RM MC CAB

MC CAB

2.20 Cables on Racks / Pipes / Ducts / Wireways/Cable Trays : MC CAB

MC CAB

MC CAB

MC CAB

2.2.1 Copper Conductor Armoured Cables : MC CAB

MC CAB

a) 3.5 core 50 sqmm 10 RM MC CAB

b) 3.5 core 35 sqmm 10 RM MC CAB

c) 4 core 25 sqmm 10 RM MC CAB

d) 4 core 16 sqmm 10 RM MC CAB

e) 4 core 10 sqmm 50 RM MC CAB

f) 4 core 6 sqmm 50 RM MC CAB

g) 4 core 4 sqmm 600 RM MC CAB

h) 3 core 25 sqmm 10 RM MC CAB

i) 3 core 16 sqmm 10 RM MC CAB

j) 3 core 10 sqmm 10 RM MC CAB

k) 3 core 6 sqmm 10 RM MC CAB

l) 3 core 4 sqmm 300 RM MC CAB

m) 2 core 6 sqmm 10 RM MC CAB

n) 2 core 4 sqmm 10 RM MC CAB

MC CAB

2.2.2 Copper Conductor Armoured Control Cables : MC CAB

MC CAB

a) 14 C 1.5 Sqmm PVC cable 10 RM MC CAB

b) 10 C 1.5 Sqmm PVC cable 10 RM MC CAB

c) 9 C 1.5 Sqmm PVC cable 10 RM MC CAB

d) 7 C 1.5 Sqmm PVC cable 10 RM MC CAB

e) 5 C 1.5 Sqmm PVC cable 10 RM MC CAB

f) 3 C 1.5 Sqmm PVC cable 10 RM MC CAB

MC CAB

2.30 Cable Termination : MC TERM

MC TERM

MC TERM

MC TERM



LABOUR RATE


2.3.1 Copper conductor armoured cables : MC TERM

MC TERM

a) 3.5 core 50 sqmm 2 Nos. MC TERM

b) 3.5 core 35 sqmm 2 Nos. MC TERM

c) 4 core 25 sqmm 2 Nos. MC TERM

d) 4 core 16 sqmm 2 Nos. MC TERM

e) 4 core 10 sqmm 4 Nos. MC TERM

f) 4 core 6 sqmm 4 Nos. MC TERM

g) 4 core 4 sqmm 42 Nos. MC TERM

h) 3 core 25 sqmm 2 Nos. MC TERM

i) 3 core 16 sqmm 2 Nos. MC TERM

j) 3 core 10 sqmm 2 Nos. MC TERM

k) 3 core 6 sqmm 2 Nos. MC TERM

l) 3 core 4 sqmm 20 Nos. MC TERM

m) 2 core 6 sqmm 2 Nos. MC TERM

n) 2 core 4 sqmm 2 Nos. MC TERM

MC TERM

2.3.2 Copper Conductor PVC Insulated Armoured Control Cables : MC TERM

MC TERM

MC TERM

a) 14 C x 1.5 Sqmm 2 Nos. MC TERM

b) 10 C x 1.5 Sqmm 2 Nos. MC TERM

c) 9 C x 1.5 Sqmm 2 Nos. MC TERM

d) 7 C x 1.5 Sqmm 2 Nos. MC TERM

e) 5 C x 1.5 Sqmm 2 Nos. MC TERM

f) 3 C x 1.5 Sqmm 2 Nos. MC TERM

MC TERM

Notes: MC TERM

MC TERM

2.40 MC CAB

MC CAB

a) 4 C x 185 Sqm, CWZ Cable 5 RM MC CAB

b) 4 C x 150 Sqm, CWZ Cable 5 RM MC CAB

c) 4 C x 120 Sqm, CWZ Cable 5 RM MC CAB

d) 4 C x 95 Sqm, CWZ Cable 5 RM MC CAB

e) 4 C x 70 Sqm, CWZ Cable 5 RM MC CAB

f) 4 C x 50 Sqm, CWZ Cable 5 RM MC CAB

g) 4 C x 35 Sqm, CWZ Cable 5 RM MC CAB

h) 4 C x 25 Sqm, CWZ Cable 5 RM MC CAB




LABOUR RATE


i) 4 C x 16 Sqm, CWZ Cable 5 RM MC CAB

j) 4 C x 10 Sqm, CWZ Cable 5 RM MC CAB

k) 4 C x 6 Sqm, CWZ Cable 5 RM MC CAB

l) 4 C x 4 Sqm, CWZ Cable 5 RM MC CAB

m) 4 C x 2.5 Sqm, CWZ Cable 5 RM MC CAB

MC CAB

2.50 Cable Trays : MC TRAY

MC TRAY

MC TRAY

MC TRAY

Notes: MC TRAY

MC TRAY

2.5.1 Ladder Type Cable tray : MC TRAY

MC TRAY

a) 900 mm x 75 mm x 2.0 mm 5 RM MC TRAY

b) 750 mm x 75 mm x 2.0 mm 5 RM MC TRAY

c) 600 mm x 75 mm x 2.0 mm 5 RM MC TRAY

d) 450 mm x 75 mm x 2.0 mm 5 RM MC TRAY

e) 300 mm x 75 mm x 2.0 mm 5 RM MC TRAY

f) 250 mm x 75 mm x 2.0 mm 5 RM MC TRAY

g) 200 mm x 75 mm x 2.0 mm 5 RM MC TRAY



MC TRAY

2.52 Perforated Type Cable Tray : MC TRAY

MC TRAY

a) 750 mm x 75 mm x 2.0 mm 10 RM MC TRAY

b) 600 mm x 75 mm x 2.0 mm 10 RM MC TRAY

c) 450 mm x 75 mm x 2.0 mm 10 RM MC TRAY

d) 300 mm x 50 mm x 2.0 mm 10 RM MC TRAY

e) 200 mm x 75 mm x 2.0 mm 100 RM MC TRAY

f) 150 mm x 75 mm x 2.0 mm 10 RM MC TRAY


MC TRAY

2.5.3 Fibreglass Ladder Type Cable Tray : MC TRAY

MC TRAY



LABOUR RATE


MC TRAY

MC TRAY

a) 600 mm wide 5 RM MC TRAY

b) 450 mm wide 5 RM MC TRAY

c) 300 mm wide 5 RM MC TRAY

d) 225 mm wide 5 RM MC TRAY

e) 100 mm wide 5 RM MC TRAY

MC TRAY

2.60 Misc. Works Relating to Cabling: MC PIPE

MC PIPE

2.6.1 GI Pipe Installation : MC PIPE

MC PIPE

MC PIPE

MC PIPE

a) 25 mm dia 10 RM MC PIPE

b) 32 mm dia 10 RM MC PIPE

c) 40 mm dia 10 RM MC PIPE

d) 50 mm dia 10 RM MC PIPE

e) 80 mm dia 10 RM MC PIPE

f) 100 mm dia 10 RM MC PIPE

g) 150 mm dia 10 RM MC PIPE

MC PIPE

2.6.2 Flexible Conduits Installation : MC PW

MC PW

MC PW

2.6.2.1 GI flexible conduits : MC PW

MC PW

a) 20 mm dia 50 RM MC PW

b) 25 mm dia 50 RM MC PW

c) 40 mm dia 10 RM MC PW

d) 50 mm dia 10 RM MC PW

MC PW

MC PW

3.00 WIRING : MC PW

MC PW

3.10 Point Wiring : MC PW





LABOUR RATE


MC PW

The rates for point wiring shall include the circuit wiring. MC PW

MC PW

MC PW

MC PW

MC PW

MC PW

MC PW

MC PW

MC PW

MC PW

MC PW

MC PW

3.1.1 Light Points controlled by switch : MC PW

MC PW

i. Single/ First light point con-trolled by a 5Amps switch. 24 Nos. MC PW

MC PW

ii. Same as above but loop point 44 Nos. MC PW

MC PW

3.1.2 Light Points controlled directly from DB . MC PW

MC PW

i. Single/ First Point Controlled directly by MCB in DB 1 Nos. MC PW

MC PW

ii. Same as above but loop point. 5 Nos. MC PW

MC PW

3.1.3 Light points controlled by Two Way Switch : MC PW

MC PW

i) 2 Nos. MC PW

MC PW

ii) Same as above but loop point. 9 Nos. MC PW

MC PW

3.1.4 Light Points controlled by Twilight switch : MC PW

MC PW

i. Single/ First light point con-trolled by a Twilight switch. 24 Nos. MC PW

MC PW

ii. Same as above but loop point 44 Nos. MC PW







LABOUR RATE


MC PW

3.1.5 Light points controlled by Push Buttons : MC PW

MC PW

i) Five light points controlled by Two Push Buttons. 1 Nos. MC PW

MC PW

ii) Eleven light points controlled by Two Push Buttons. 1 Nos. MC PW

MC PW

iii) Ten light points controlled by Four Push Buttons. 1 Nos. MC PW

MC PW

iv) Twelve light points controlled by Four Push Buttons. 1 Nos. MC PW

MC PW

v) Ten light points controlled by Six Push Buttons. 1 Nos. MC PW

MC PW

3.1.6 Presence Sensor : MC PW

MC PW

a) 1 Nos. MC PW

MC PW

3.1.7 6A Socket Points : MC PW

MC PW

a) 12 Point MC PW

MC PW

3.1.8 FCU Points controlled by 6A Switch : MC PW

MC PW

i) 2 Nos. MC PW

MC PW

ii) Same as above but loop point. 9 Nos. MC PW

MC PW

3.20 Power Socket Wiring : MC PW

MC PW

MC PW

MC PW





LABOUR RATE


3.2.1 4 Point MC PW

MC PW

3.2.2 1 Point MC PW

MC PW

3.2.3 7 Point MC PW

MC PW

3.2.4 10 Point MC PW

MC PW

3.2.5 1 Point MC PW

MC PW


Wiring for 2 Nos. BS, 16A, switched outlet with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos. BS, 16A, switched outlet with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.




LABOUR RATE


3.2.6 1 Point MC PW

MC PW

3.2.7 1 Point MC PW

MC PW

3.2.8 1 Point MC PW

MC PW

3.30 CEE INDUSTRIAL SWITCHED SOCKETS MC PW

MC PW

3.3.1 MC PW

MC PW

a) 16A, 2P+E, CEE, switched socket outlet with plug top (IP-44) 1 Nos. MC PW

MC PW

b) 8 Nos. MC PW

MC PW

c) 4 No. MC PW

MC PW

d) 3 No. MC PW

Wiring for 3 Nos. BS, 16A, switched outlets and 1 No. 16A DP Isolator in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 3 Nos. BS, 16A, switched outlets and 1 No. 16A DP Isolator in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 1 No. 16A DP Isolators in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. 16A DP Isolator in IP-65 enclosure with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 1 No. Disabled Alarm Device with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. Disabled Alarm Device, Single phase motor of required capacity (As approved by the Engineer-in-charge) with internal wiring in G.I. box, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.


32A, 2P+E, CEE, switched socket outlet with plug top (IP-44) (for single phase motors)



LABOUR RATE


MC PW

e) 1 No. MC PW

MC PW

b) 2 Nos. MC PW

MC PW

3.40 ISOLATORS MC DB

MC DB

MC DB

MC DB

a) 16A Double pole isolator 10 Nos. MC DB

MC DB

b) 16A Four pole isolator 2 Nos. MC DB

MC DB

c) 32A Four pole isolator 1 Nos. MC DB

MC DB

3.50 M.S. Black Conduits : MC PW

MC PW

MC PW

MC PW

a) 20 mm dia 20 RM MC PW

MC PW

b) 25 mm dia 20 RM MC PW

MC PW

c) 32 mm dia 20 RM MC PW

MC PW

d) 40 mm dia 20 RM MC PW

MC PW

e) 50 mm dia 20 RM MC PW

MC PW

3.60 Sub-mains Wiring : MC PW

MC PW

MC PW

MC PW

a) 2 x 1.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM MC PW

MC PW

b) 2 x 2.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM MC PW

MC PW

c) 2 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire. 20 RM MC PW

MC PW


32A, 3P+N+E, CEE, switched socket outlet with plug top (IP-44) (for three phase motors)




LABOUR RATE


d) 2 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM MC PW

MC PW

e) 4 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM MC PW

MC PW

f) 4 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM MC PW

MC PW

g) 2 x 10.0 Sqmm + 1 No. 6.0 Sqmm Copper earth wire 20 RM MC PW

MC PW

h) 4 x 10.0 Sqmm + 2 Nos. 6.0 Sqmm Copper earth wire 20 RM MC PW

MC PW

i) 4 x 16.0 Sqmm + 2 Nos. 10.0 Sqmm Copper earth wire 20 RM MC PW

MC PW

j) 4 x 25.0 Sqmm + 2 Nos. 16.0 Sqmm Copper earth wire 20 RM MC PW

MC PW

Note: MC PW

MC PW

1) MC PW

MC PW

2) MC PW

MC PW

TOTAL OF WIRING CARRIED OVER TO SUMMARY MC PW

4.00 LIGHTING FIXTURES : MC LIGHT

MC LIGHT

MC LIGHT

MC LIGHT

1.00 2 Set MC LIGHT

MC LIGHT

2.00 2 Set MC LIGHT

MC LIGHT

3.00 10 Set MC LIGHT

MC LIGHT




Recessed Grid Luminaire 2x36W (Thorn Specalph BS/SB 2x36W or Equivalent) (T2).

Recessed Grid Luminaire 2x36W (Thorn Specalph BS/SB 2x36W or Equivalent) (T2) complete with emergency lighting units.


LABOUR RATE


4.00 6 Set MC LIGHT

MC LIGHT


MC LIGHT

6.00 5 Set MC LIGHT

MC LIGHT


MC LIGHT

8.00 3 Set MC LIGHT

MC LIGHT

9.00 9 Set MC LIGHT

MC LIGHT


MC LIGHT


MC LIGHT


MC LIGHT


MC LIGHT


MC LIGHT


MC LIGHT


MC LIGHT


MC LIGHT


MC LIGHT







Surfaced Luminaire 2x58W IP65 (Thorn AQUAF2 2x58W IP65 or Equivalent) (T9)

Surfaced Luminaire 2x58W IP65 (Thorn AQUAF2 2x58W IP65 or Equivalent) (T9) complete with emergency lighting units.

Bulk Head Light Wall Mounted with 2 x 28W TC-DEL Lamp IP 65 (Thorn Danube 2x28W IP65 or Equivalent) (T11).



Recessed Quad 2 x 18W (Thorn Matrix 300 2 x 18W or Equivalent) (T15)

Recessed Quad 2 x 18W (Thorn Matrix 300 2 x 18W or Equivalent) (T15) complete with emergency lighting units.



LABOUR RATE



MC LIGHT


MC LIGHT

MC LIGHT

5.00 EARTHING & LIGHTNING PROTECTION SYSTEM : MC EARTH

MC EARTH

5.10 Earthing System: MC EARTH

MC EARTH

5.1.1 5 Nos. MC EARTH

MC EARTH


MC EARTH


MC EARTH

5.1.4 Earthing Strip/Tape/Cables : MC EARTH

MC EARTH

MC EARTH

MC EARTH


Emergency Exit Left & Right Fixture (Cooper/Crompton or Equivalent) complete with emergency lighting units.






LABOUR RATE


5.1.4.1 G.I. Earthing strip/tape : MC EARTH

MC EARTH

a 75 x 8 mm strip 10 RM MC EARTH

b 75 x 6 mm strip 10 RM MC EARTH

c 50 x 6 mm strip 10 RM MC EARTH

d 40 x 6 mm strip 10 RM MC EARTH

e 32 x 6 mm strip 10 RM MC EARTH

f 25 x 6 mm strip 10 RM MC EARTH

g 25 x 3 mm strip 250 RM MC EARTH

MC EARTH

5.1.4.2 Tinned Copper earthing strip/tape : MC EARTH

MC EARTH

a) 50 x 6 mm 10 RM MC EARTH

b) 32 x 6 mm 10 RM MC EARTH

c) 25 x 6 mm 10 RM MC EARTH

d) 25 x 3 mm 10 RM MC EARTH

MC EARTH

5.1.5 MC CAB

MC CAB

a) 1C x 240 Sqm 100 RM MC CAB

MC CAB

b) 1C x 185 Sqm 100 RM MC CAB

MC CAB

c) 1C x 90 Sqm 10 RM MC CAB

MC CAB

d) 1C x 50 Sqm 10 RM MC CAB

MC CAB

5.1.6 MC EARTH

MC EARTH

5.1.6.1 75 x 6 mm GI Earth Bars. MC EARTH

MC EARTH

a) 300 mm 1 No. MC EARTH

b) 500 mm 1 Nos. MC EARTH

c) 750 mm 1 Nos. MC EARTH

d) 1000 mm 1 No. MC EARTH

MC EARTH


MC EARTH


Supply, installation, Termination, testing and Commissioning of following sizes tinned Cu/GI Earth Bars including its supporting/fixing hardware, as per drawings, specifications and as directed by Engineer-in-charge.

LABOUR RATE


a) 300 mm 1 Nos. MC EARTH



d) 1000 mm 1 Nos. MC EARTH

MC EARTH

5.1.6.3 75 x 6 mm tinnned Cu Earth Bars. MC EARTH

MC EARTH

a) 300 mm 1 No. MC EARTH



d) 1000 mm 1 No. MC EARTH

MC EARTH

5.1.6.4 50 x 6 mm tinned Cu Earth Bars. MC EARTH

MC EARTH





5.20 Lightning Protection System: MC EARTH

MC EARTH


MC EARTH


MC EARTH

5.2.3 Earthing Strip/Wires : MC EARTH

MC EARTH

Supply, installation, testing and commissioning of copper plate earthing stations making earth pits, earthing with copper earth plate 600 mm x 600 mm x 3.15 mm thick including funnel, charcoal/coke, salt, all earth work. Providing masonry enclosure with 10 mm thick C.I. cover plate having locking arrangement and watering pipe, disconnecting/ testing links etc as per IS–3043 complete as required, as per drawings, specifications and direction of Engineer-in-charge.


LABOUR RATE


MC EARTH

MC EARTH

a) 25 x 3 mm strip 250 RM MC EARTH

MC EARTH

b) 25 x 6 mm strip 100 RM MC EARTH

MC EARTH

5.2.4 MC EARTH

MC EARTH


MC EARTH





MC EARTH


MC EARTH






MC EARTH


MC EARTH

MC EARTH

PIT BUILDING PB HTO

Supply, installation, testing and commissioning of following sizes of GI strip/wire clamped to walls, Ductwork, pipe work, Structural steel work, cladding work etc. in recess or surface etc for Lightning Protection System complete as required including inter connection, terminations, between length at joints, all fixing accessories saddles, plastic isolator mounting (of 50mmx80mm approx.), Sealing Collars, Sealing Strip, Squared Timber Block (80mmx100mm approx.), clamps, Lugs etc and other fixing hardware material as required for proper installation as per detail drawings, specifications and direction of Engineer-in-charge.





LABOUR RATE


PB HTO

1.00 11 KV, GAS INSULATED, RING MAIN UNITS: PB HTO

PB HTO

1.10 PB HTO

PB HTO

a) PB HTO

PB HTO

b) 2 Set PB HTO

PB HTO

Notes : PB HTO

PB HTO

i) PB HTO

PB HTO

ii) PB HTO

PB HTO

1.30 Battery & Battery Charger : PB BATT

PB BATT

a) PB BATT

PB BATT

i) for 24V DC System ur Set PB BATT

PB BATT

ii) for 110V DC System 2 Set PB BATT

PB BATT

b) PB BATT

PB BATT

i) for 24V DC System ur Set PB BATT

PB BATT

ii) for 110V DC System 2 Set PB BATT

PB BATT

Unloading,Receiving, storing, checking, handling, installation, testing and commissioning of 350 MVA, 11 KV indoor 4 way, SF6 insulated, Extensible Ring Main Breaker Unit consisting of following :-

Two (2) Nos. 630 Amp, TP VCB with disconnector and Earth Switch as Incommers, with required Indication, Metering and Protection System.

Two (2) Nos. 630 Amp, TP VCB with disconnector and Earth Switch as Outgoings, with required Indication, Metering & Protection System.

Installation shall include supply of all Hardware material (excluding civil work) as required and as per Approved Shop Drawings.

Necessary Co-ordination with client and manufacturer to be done by the contractor for successful installation, Testing and Commissioning.

Supply, installation, testing & commissioning of 200 AH capacity, Ni-Cd maintenance free batteries, duly charged, complete with seasoned teak wood stand, connecting lead as required for 11 KV RMU boards and some other control loads. (AH calculation to be submitted by successful bidder in co-ordination with the client and 11 KV, RMU Vendor).

Supply, installation, testing & commissioning of suitable float cum boost battery charger and necessary distribution board with 12 Nos. 16A outgoing feeders, instrument panel, Amp, Volts meter, interconnections etc. power supply 240 V, 1 phase, 50 Hz ± 10%. Charger trouble annunciation shall be provided through potential free contacts.

LABOUR RATE


PB BATT

2.00 H T CABLING : PB CAB

PB CAB

2.10 11kV Cable laying : PB CAB

PB CAB

PB CAB

PB CAB

2.1.1 Underground: PB CAB

PB CAB

PB CAB

PB CAB

a) 3C x 400 Sqmm, 11KV XLPE 10 Mtr PB CAB

PB CAB

b) 3C x 300 Sqmm, 11KV XLPE 10 Mtr PB CAB

PB CAB

c) 3C x 240 Sqmm, 11KV XLPE 10 Mtr PB CAB

PB CAB

2.1.2 In hume pipe/trays/trenches : PB CAB

PB CAB

PB CAB

PB CAB

a) 3C x 400 Sqmm, 11KV XLPE 20 Mtr. PB CAB

PB CAB

b) 3C x 300 Sqmm, 11KV XLPE 20 Mtr PB CAB

PB CAB

c) 3C x 240 Sqmm, 11KV XLPE 100 Mtr PB CAB

PB CAB

2.20 End Termination (HT) : PB TERM

PB TERM

PB TERM

PB TERM

a) 3C x 400 Sqmm, 11KV XLPE 1 Set PB TERM

PB TERM

b) 3C x 300 Sqmm, 11KV XLPE 1 Set PB TERM

PB TERM

TOTAL OF 11 KV, GAS INSULATED, RING MAIN UNITS CARRIED OVER TO SUMMARY

Supplying, laying, testing and commissioning of 11 KV grade copper conductor, cross linked polyethylene (XLPE) insulated, individual core screened, extruded inner sheath, flat steel/strip armoured PVC sheathed cable and suitable for (E) system complete as required and as per specification, as follows:

Supply and laying of following size of 11 KV cables in earth as per drawing, specifications and direction of engineer in charge.

Supply and laying of following sizes of 11 KV cables on already laid trays/hume pipes/walls/ trench etc, as required, as per drawing, specifications and direction of Engineer-in-charge.

Supply, installation, testing and commissioning of Cable joints of 11 KV grade, XLPE insulated, armoured, Copper Conductor cable with suitable cable termination KITS including all accessories i.e. Sockets, lugs, gland etc as required, as per drawings, specifications and direction of Engineer-in-charge.

LABOUR RATE


c) 3C x 240 Sqmm, 11KV XLPE 8 Set PB TERM

PB TERM

2.30 End Termination (HT) : PB TERM

PB TERM

PB TERM

PB TERM

a) 3C x 400 Sqmm, 11KV XLPE 4 Set PB TERM

PB TERM

b) 3C x 300 Sqmm, 11KV XLPE 1 Set PB TERM

PB TERM

c) 3C x 240 Sqmm, 11KV XLPE 1 Set PB TERM

PB TERM

Notes : PB TERM

PB TERM

1.00 PB TERM

PB TERM

2.00 PB TERM

PB TERM

TOTAL OF H.T CABLING CARRIED OVER TO SUMMARY PB TERM

3.00 SUB STATION SAFETY EQUIPMENT : PB MISC

PB MISC

3.10 PB MISC

PB MISC

a) 11 KV grade size 1000 x 900 mm of suitable thickness 12 Nos. PB MISC

PB MISC

b) 1100 V grade size 1000 x 900 mm of suitable thickness 40 Nos. PB MISC

PB MISC

3.20 3 Nos. PB MISC

PB MISC

3.30 4 Nos. PB MISC

PB MISC

3.40 Providing 11 KV tested hand gloves. 2 Pair PB MISC

PB MISC

3.50 Providing 11 KV insulated grounding rod. 2 Nos. PB MISC

Cable jointing of 11 KV grade, XLPE insulated, armoured, Aluminium Conductor cable with suitable cable termination KITS including all accessories i.e. Sockets, lugs, gland etc as required, as per drawings, specifications and direction of Engineer-in-charge.

The cable and cable terminations quantities given above, are approximate. The contractor shall measure the cables required at site and procurement order shall be place accrodingly.

Wherever copper cable to be connected to Aluminium Bus Bar or vis-à-vis., Bimetalic lugs to be used for terminations.




LABOUR RATE


PB MISC

3.60 Providing first aid box as per IS:13115. 2 Set PB MISC

PB MISC

PB MISC

4.00 TRANSFORMER: PB TRAFO

PB TRAFO

PB TRAFO

PB TRAFO

a) 1600 KVA 4 Set PB TRAFO

PB TRAFO

PB TRAFO

Notes : PB TRAFO

PB TRAFO

i) PB TRAFO

PB TRAFO

ii) PB TRAFO

PB TRAFO

PB TRAFO

PB BBT

5.0 BUS DUCT/BUS BAR TRUNKING SYSTEM : PB BBT

PB BBT

5.1 Bus Duct : PB BBT

PB BBT

PB BBT

PB BBT


Unloading,Receiving, storing, handling, installation, testing and commissioning of 11 kV/ 400V (terminal voltage), 3 phase, 50 Hz delta/star connected, copper winding. indoor type, natural air cooled, dry type, cast resin transformer of following ratings, complete with all fittings such as thermometer, off circuit tap changer with + 5 % to –15%, tapping at the step of 2.5% bi-directional roller, diagrams & rating plate & Winding temperature indicator, lifting lugs, H. T. cable box/ LT Terminal Box suitable for bus duct / Cable termination etc. complete as per relevant specifications, drawings and direction of Engineer-in-charge.

Installation rate shall include unloading, receiving including storage at site,assembly, erection, testing and commissioning etc. as required, as per approved Shop Drawing and as per direction of Engineer-in-charge..

Necessary co-ordination with the manufacturer and client shall be done by the contractor without extra cost.

TOTAL OF TRANSFORMER CARRIED OVER TO SUMMARY

Design, manufacturing, supply, installation, testing & commissioning (at site) of sheet steel enclosed 3 phase & neutral (100% neutral), 400V, 50 Hz., 65 KA copper conductor bus duct with insulation of thermal rating confirming to class 'F', including bends, transposition piece, expansion joint, Tees, End termination units, Feeder units, tap off unit etc. with all flexible connections as per specifications and drawings with all accessories, supports and termination of bus duct to switchgear/transformer.

LABOUR RATE


a)

80 RM

PB BBT

PB BBT

b)

120 RM

PB BBT

PB BBT

5.2 Bus Bar Trunking (BBT) : PB BBT

PB BBT

5.2.1

PB BBT

PB BBT

PB BBT

PB BBT

i)40 RM

PB BBT

PB BBT

ii)180 RM

PB BBT

PB BBT

iii)565 RM

PB BBT

PB BBT

iv)ur RM

PB BBT

PB BBT

v)15 RM

PB BBT

PB BBT

vi)ur RM

PB BBT

PB BBT

vii)ur RM

PB BBT

PB BBT

Notes: PB BBT

PB BBT

a)PB BBT

PB BBT













LABOUR RATE


b) Rates shall be inclusive of all accessories & fittings. PB BBT

PB BBT

5.2.2

PB BBT

PB BBT

i) 630A, TPN MCCB, 65 kA Tap off box. 1 No. PB BBT

PB BBT

ii) 400A TPN MCCB, 65 kA Tap off box. 2 Nos. PB BBT

PB BBT

iii) 315A TPN MCCB, 65 kA Tap off box. 4 Nos. PB BBT

PB BBT

iv) 250A TPN MCCB, 65 kA Tap off box. 1 Nos. PB BBT

PB BBT

v) 160A TPN MCCB, 65 kA Tap off box. 40 Nos. PB BBT

PB BBT

vi) 100A TPN MCCB, 65 kA Tap off box. 2 Nos. PB BBT

PB BBT

vii) 63A TPN MCCB, 65 kA Tap off box. 2 Nos. PB BBT

PB BBT

vi) 50A TPN MCCB, 65 kA Tap off box. 2 Nos. PB BBT

PB BBT

5.2.3

PB BBT

PB BBT

a) 1600 Amp with 1600 Amp, TPN, 65 kA, MDO ACB. 1 Nos. PB BBT

PB BBT

b) 1250 Amp with 1250 Amp, TPN, 65 kA, MDO ACB. 1 Nos. PB BBT

PB BBT

c) 1000 Amp with 1000 Amp, TPN, 65 kA, MDO ACB. 3 Nos. PB BBT

PB BBT

d) 800 Amp with 800 Amp, TPN, 65 kA, MDO ACB. ur Nos. PB BBT

PB BBT

e) 630 Amp with 630 Amp, TPN, 65 kA, MCCB. 1 Nos. PB BBT

PB BBT

f) 400 Amp with 400 Amp, TPN, 65 kA, MCCB. ur Nos. PB BBT

PB BBT

g) 250 Amp with 250 Amp, TPN, 65 kA, MCCB. ur No. PB BBT

PB BBT

PB BBT



LABOUR RATE


5.2.4 PB PANEL

PB PANEL

- PB PANEL

- PB PANEL

PB PANEL

- PB PANEL

PB PANEL

a) ur Nos. PB PANEL

PB PANEL

b) ur Nos. PB PANEL

PB PANEL

c) ur Nos. PB PANEL

PB PANEL

Notes: PB PANEL

PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL

PB PANEL

6.00 LV SWITCHGEAR PANELS & DISTRIBUTION BOARDS: PB PANEL

PB PANEL

LV SWITCHGEAR PANELS : PB PANEL

PB PANEL





Bus Coupler Panel with 1600 Amp, 400V, 65 kA @ 1 Sec, 4 Pole, EDO ACB

Bus Coupler Panel with 1250 Amp, 400V, 65 kA @ 1 Sec, 4 Pole, EDO ACB

Bus Coupler Panel with 1000 Amp, 400V, 65 kA @ 1 Sec, 4 Pole, MCCB




LABOUR RATE


PB PANEL

PB PANEL

Important Notes: Common for all Switchboard: PB PANEL

PB PANEL

1.00 PB PANEL

PB PANEL

2.00 Fault current wherever mentioned shall be Ics value. PB PANEL

PB PANEL

3.00 PB PANEL

PB PANEL

4.00 All feeder doors shall have pad locking arrangement. PB PANEL

PB PANEL

5.00 All TP feeders shall have solid isolable neutral link. PB PANEL

PB PANEL

6.00 PB PANEL

PB PANEL

7.00 All power contactors including NIC shall be of AC3 duty. PB PANEL

PB PANEL

8.00 PB PANEL

PB PANEL

9.00 PB PANEL

Design, manufacture, supply, unloading, receiving, storing, handling, installation, testing and commissioning of following LV panels suitable for 400 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, Copper bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of as indicated elsewhere or shown in Single Line Diagram.

The BOQ shall be read inconjunction with general notes, specification and Single Line Diagram. Incase of any discrepancy between specification, BOQ and SLD, the same shall be brought to the notice of Employer before quoting the rates, otherwise stringent condition shall be deemed to have been considered.





LABOUR RATE


PB PANEL

10.00 PB PANEL

11.00 Capacitor shall be super heavy duty type (MPP technology). PB PANEL

PB PANEL

12.00 PB PANEL

PB PANEL

13.00 PB PANEL

PB PANEL

14.00 PB PANEL

PB PANEL

15.00 All CT, PT shall be cast resin. PB PANEL

PB PANEL

16.00 All meters are digital type. PB PANEL

PB PANEL

17.00 PB PANEL

PB PANEL

18.00 PB PANEL

PB PANEL

19.00 PB PANEL

PB PANEL

20.00 Bus bar chamber shall be kept at top of the all panels. PB PANEL

PB PANEL

21.00 PB PANEL

PB PANEL

22.00 PB PANEL

PB PANEL

23.00 All indicating light shall be LED type . PB PANEL

PB PANEL

24.00 PB PANEL

PB PANEL

25.00 PB PANEL

PB PANEL

26.00 PB PANEL













LABOUR RATE


PB PANEL

6.10 MDB-EE-PB00-C3 : PB PANEL

Location: Ground Floor Electrical Room : PB PANEL

PB PANEL

MDB-EE-PB00-C3 shall Comprise of the following: PB PANEL

PB PANEL

a) Incomings: PB PANEL

PB PANEL

PB PANEL

PB PANEL

PB PANEL

b) PB PANEL

PB PANEL

Each incoming breaker shall be provided with PB PANEL

PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL

iii) PB PANEL

PB PANEL

iv) One set (3 Nos) phase indication lamp with backup SP MCB. PB PANEL

PB PANEL

v) PB PANEL

PB PANEL

1.00 WTI Alarm PB PANEL

2.00 WTI Trip PB PANEL

3.00 REF Trip PB PANEL

4.00 HT Breaker Trip PB PANEL

PB PANEL

c) PB PANEL

PB PANEL

Two (2) Nos. 2500 Amps, 400 V, 65kA, TPN draw out, Electrically operated ACB, with ON/OFF/TRIP/Trip circuit healthy indication lamp and TNC control switch, under voltage & shunt trip release, anti pumping protection microprocessor based O/C, S/C & E/F protection etc. complete as required for Transformer Supply Feeder.

One (1) no. 1600 Amps, 400 V, 50KA, four pole EDO ACB Bus coupler breaker complete with under voltage and shunt trip release, anti pumping protection, ON/OFF/ indication etc. to be Electrically and mechanically interlocked with the incommers so that necessary interlocking can be achieved as per approved SLD, (E/MP/PB 5.S.02.01A,02A,03A,04A,05A,06A).

Metering & indication for Transformer Supply incoming breakers:

One (1) No. Digital Multifunction meter with RS-485 port suitable for measurement of voltage, currents, Power Factor, Frequency,Power , Energy, harmonics and hours run (EM6400 of 'Conzerv' make or equivalent).


One (1) set of 2500/5 A, C.L 1.0 CTs for input to APFC relay.

One (1) No. 4 Window Audi/visual annunciator system complete with hooter, Ack, test & reset PBs for annunciation of Alarm and Trip for following :-

Protection Relays for Transformer Supply incoming breakers:

LABOUR RATE


Each Transformer breaker to be provided with : PB PANEL

PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL

iii) PB PANEL

PB PANEL

Notes : PB PANEL

PB PANEL

1.00 PB PANEL

PB PANEL

2.00 PB PANEL

d) BUS BARS: PB PANEL

PB PANEL

PB PANEL

PB PANEL

e) Outgoing: PB PANEL

PB PANEL

Section-1 PB PANEL

PB PANEL

i) One (1) No. 1250A, 65 KA, 4P ACB. PB PANEL

PB PANEL

ii) One (1) No. 630 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

iii) One (1) No. 400 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL

i) One (1) No. 1000A, 65 KA, TPN ACB. PB PANEL

PB PANEL

ii) Four (4) Nos. 400 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

iii) Two (2) Nos. 100A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

1 Set PB PANEL

PB PANEL

6.20 MDB-EE-PB10-D51 : PB PANEL

Location: Ground Floor Electrical Room : PB PANEL

One (1) no. SIPROTEC compact 7SJ80 Multifunction Protection Relay of Siemens make or equivalent.

One(1) set of CTs of ratio 2500/5A with core for protection of 5VA and class 5P10.

One (1) Set, 4 Nos. CTs of ratio 2500/1A, Class PS shall be provided for REF Protection.


Operation interlocks as per specification & drawings indicating sufficient nos. of potential free contacts for interlocking/ indication annunciation/control etc shall be provided by the bidder as required.

Two (2) Sets of 3000Amp.,65kA, TPN+E, Copper Bus bar with colour coded, heat shrinkable sleeves (with 100% neutral). Seperate Earth Bus Bar of Copper Conductor of 65 x 6 mm.

MDB-EE-PB00-C3 described as above (from a to e) and as per Specifications and SLD.

LABOUR RATE


PB PANEL

MDB-EE-PB10-D51 shall Comprise of the following: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL

PB PANEL

PB PANEL

b) PB PANEL

PB PANEL

Each incoming breaker shall be provided with PB PANEL

PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL

iii) PB PANEL

iv) One set (3 Nos) phase indication lamp with backup SP MCB. PB PANEL

PB PANEL

v) PB PANEL

PB PANEL

1.00 WTI Alarm PB PANEL

2.00 WTI Trip PB PANEL

3.00 REF Trip PB PANEL

4.00 HT Breaker Trip PB PANEL

PB PANEL

c) PB PANEL

PB PANEL

Each Transformer breaker to be provided with : PB PANEL

PB PANEL

i) PB PANEL

Two (2) Nos. 2500 Amps, 400 V, 65kA, TPN draw out, Electrically operated ACB, with ON/OFF/TRIP/Trip circuit healthy indication lamp and TNC control switch, under voltage & shunt trip release, anti pumping protection microprocessor based O/C, S/C & E/F protection etc. complete as required for Transformer Supply Feeder.

One (1) no. 1600 Amps, 400 V, 50KA, four pole EDO ACB Bus coupler breaker complete with under voltage and shunt trip release, anti pumping protection, ON/OFF/ indication etc. to be Electrically and mechanically interlocked with the incommers so that necessary interlocking can be achieved as per approved SLD.


One (1) No. Digital Multifunction meter with RS-485 port suitable for measurement of voltage, currents, Power Factor, Frequency, Power, Energy, harmonics and hours run (EM6400 of 'Conzerv' make or equivalent).






LABOUR RATE


PB PANEL

ii) PB PANEL

PB PANEL

iii) PB PANEL

PB PANEL

Notes : PB PANEL

PB PANEL

1.00 PB PANEL

PB PANEL

2.00 PB PANEL

PB PANEL

d) BUS BARS: PB PANEL

PB PANEL

PB PANEL

PB PANEL

e) Outgoing: PB PANEL

PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL

One (1) No. 1000A, 65 KA, TPN ACB. PB PANEL

PB PANEL


PB PANEL

iii) One (1) No. 250A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL


PB PANEL

iii) Five (5) Nos. 400 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

iv) Two (2) Nos. 250A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

1 Set PB PANEL

6.30 CAPACITOR PANELS (250 kVAR) : PB PANEL

PB PANEL




Operation interlocks as per specification & drawings indicating sufficient nos. of potential free contacts for interlocking/ indication annunciation/control etc shall be provided by the bidder as required.

Two (2) Sets of 3000Amp.,65kA, TPN+E, Copper Bus bar with colour coded, heat shrinkable sleeves (with 100% neutral). Seperate Earth Bus Bar of Copper Conductor of 65 x 6 mm.

MDB-EE-PB10-D51 described as above (from a to e) and as per Specifications and SLD.

LABOUR RATE


a) Incoming : PB PANEL

PB PANEL

PB PANEL

PB PANEL

b) Metering, Indication and Protection : PB PANEL

PB PANEL

- PB PANEL

PB PANEL

- PB PANEL

PB PANEL

c) Busbar : PB PANEL

PB PANEL

- PB PANEL

PB PANEL

d) Outgoings : PB PANEL

PB PANEL

- 4 Set PB PANEL

PB PANEL

Notes: PB PANEL

PB PANEL

1.00 PB PANEL

PB PANEL

2.00 PB PANEL

PB PANEL

3.00 PB PANEL

PB PANEL

6.40 SDB-EE-PB00-D24 PB PANEL

PB PANEL

SDB-EE-PB00-D24 shall Comprise of the following: PB PANEL

PB PANEL


PB PANEL

One (1) No. 400A, 36KA, TPN MCCB, incomer with 10 step APFC relay with Auto/Manual selector switch, timer, aux. Contactor, louvers, Exhaust fan etc.

One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CTs of ratio 400A /5A, CL 1.0, 15 VA.

One (1) set of RYB phase indication lamps with control SP MCB.

500A TPN+E, Cu. Busbar insulated with heat shrinkable sleeves and shall be color coded. Copper Earth Bus of 50 x 6 mm.

250 KVAR Capacitor Panel in steps of 10 Nos. of 1 x 25 kVAR banks.

Each capacitor bank should have its individual MCCB & Contactor suitable for capacitor duty including fuses for each capacitor unit as per specifications and approved SLD.

Enclosure of capacitor panel shall be liberally designed to take care of internal heat emission by capacitor unit without forced cooling and to limit the temperature rise with in permissible limit. However, louvers are allowed to facilitate extra cooling.

Enclosure of capacitor panel shall be designed so that detuned reactors can be installed in the same panel for harmonics reduction, in future.

LABOUR RATE


PB PANEL

PB PANEL

b) Metering & indication for incoming breakers: PB PANEL

PB PANEL

Incoming breaker shall be provided with PB PANEL

PB PANEL

i) PB PANEL

ii) PB PANEL

PB PANEL

iii) One set (3 Nos) phase indication lamp with backup SP MCB. PB PANEL

PB PANEL

Note: PB PANEL

PB PANEL

c) BUS BARS: PB PANEL

PB PANEL

PB PANEL

PB PANEL

d) Outgoing: PB PANEL

PB PANEL

i) One (1) No. 250 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL


PB PANEL

1 Set PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL

One (1) No. 400Amps, 400 V, 36kA TPN MCCB, with ON/OFF/TRIP/ indication lamp and TNC control switch, under voltage & shunt trip release with microprocessor based O/C, S/C & E/F protection etc. complete as required and as per SLD.





SDB-EE-PB00-D24 described as above (from a to d) and as per SLD

One (1) No. 250Amps, 400 V, 36kA TPN MCCB, with ON/OFF/TRIP indication lamp and TNC control switch, under voltage & shunt trip release with microprocessor based O/C, S/C & E/F protection etc. complete as required and as per SLD.

LABOUR RATE



PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL


PB PANEL

Note: PB PANEL

PB PANEL


PB PANEL

PB PANEL




PB PANEL

1 Set PB PANEL

6.60 PB PANEL

PB PANEL

PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL






SDB-EE-PB20-E8, SDB-EE-PB10-E15, SDB-EE-PB10-E22, SDB-EE-PB50-E47, SDB-EE-PB10-E47

SDB-EE-PB20-E8, SDB-EE-PB10-E15, SDB-EE-PB10-E22, SDB-EE-PB50-E47, SDB-EE-PB10-E47 shall Comprise of the following:




LABOUR RATE



PB PANEL

Note: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL

i) Two (2) Nos. 100 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

ii) Three (3) Nos. 100 A, 25 KA, TPN MCCB. PB PANEL

PB PANEL

5 Set PB PANEL

PB PANEL

6.70 SDB-EE-PB10-E08 PB PANEL

PB PANEL

SDB-EE-PB10-E08 shall Comprise of the following: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL


PB PANEL

Note: PB PANEL



SDB-EE-PB20-E8, SDB-EE-PB10-E15, SDB-EE-PB10-E22, SDB-EE-PB50-E47, SDB-EE-PB10-E47 described as above (from a to d) and as per SLD





LABOUR RATE


PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL

ii) Two (2) Nos. 100 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL


PB PANEL

1 Set PB PANEL

PB PANEL

6.80 SDB-EE-PB20-E47, SDB-EE-PB30-E47 PB PANEL

PB PANEL

PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL


PB PANEL

Note: PB PANEL


PB PANEL


SDB-EE-PB10-E08 described as above (from a to d) and as per SLD

SDB-EE-PB20-E47, SDB-EE-PB30-E47 shall Comprise of the following:





LABOUR RATE


PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

2 Set PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL


PB PANEL

Note: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL



SDB-EE-PB20-E47, SDB-EE-PB30-E47 described as above (from a to d) and as per SLD






LABOUR RATE


PB PANEL


PB PANEL

1 Set PB PANEL

6.10 SDB-EE-PB2M-D54 PB PANEL

PB PANEL

SDB-EE-PB2M-D54 shall Comprise of the following: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL


PB PANEL

Note: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL

i) Two (2) Nos. 100 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

1 Set PB PANEL

PB PANEL

6.11 SDB-EE-PB40-E47, SDB-EE-PB10-E26 PB PANEL

PB PANEL

PB PANEL







SDB-EE-PB2M-D54 described as above (from a to d) and as per SLD

SDB-EE-PB40-E47, SDB-EE-PB10-E26 shall Comprise of the following:

LABOUR RATE


PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL


PB PANEL

Note: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL

i) Three (3) Nos. 100 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL


PB PANEL

2 Set PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

PB PANEL






SDB-EE-PB40-E47, SDB-EE-PB10-E26 described as above (from a to d) and as per SLD


LABOUR RATE


PB PANEL


PB PANEL


PB PANEL

i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL


PB PANEL

Note: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL


PB PANEL

1 Set PB PANEL


PB PANEL


PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL







LABOUR RATE


i) PB PANEL

PB PANEL

ii) PB PANEL

PB PANEL


PB PANEL

Note: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL


PB PANEL

1 Set PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL

i) PB PANEL

ii) PB PANEL









LABOUR RATE


PB PANEL


PB PANEL

Note: PB PANEL

PB PANEL


PB PANEL

PB PANEL

PB PANEL


PB PANEL


PB PANEL

ii) Six (6) Nos. 100 A, 36 KA, TPN MCCB. PB PANEL

PB PANEL

1 Set PB PANEL

PB PANEL

6.60 FINAL DISTRIBUTION BOARDS PB PANEL

PB PANEL

PB PANEL

PB PANEL

6.6.1 DB-EE-PB00-D10 : PB PANEL

PB PANEL

Incomer: PB PANEL

PB PANEL

- 100A TP MCB Isolator. PB PANEL

PB PANEL

Busbar : PB PANEL

PB PANEL

- 150A 4P Cu. Busbar PB PANEL

PB PANEL

Outgoing – (10KA) comprising PB PANEL

PB PANEL

Section-1 PB PANEL

PB PANEL

- One (1) no. 32A 3 Phase RCD (100 mA). PB PANEL





LABOUR RATE


PB PANEL

- Nine (9) nos. 10A SP MCB. PB PANEL

PB PANEL

- Six (6) nos. 16A SP MCB. PB PANEL

PB PANEL

- Three (3) nos. 32A TPN MCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL

- One (1) no. 63A, 3 Phase, RCD (30 mA). PB PANEL

PB PANEL

- Twenty Two (22) nos. 16A SP MCB. PB PANEL

PB PANEL

- Space for installation of five (5) Nos. SP MCB PB PANEL

PB PANEL

DB-EE-PB00-D10 as described above and as per DB chart. 1 Set PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

- Two (2) nos. 32A TPN MCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL


LABOUR RATE


PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL

- Twenty One (21) nos. 10A SP MCB. PB PANEL

PB PANEL

- One (1) no. 32A TPN MCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL

- Three (3) nos. 10A SP MCB. PB PANEL

PB PANEL

- Nineteen (19) nos. 16A SP MCB. PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL



PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL

LABOUR RATE



PB PANEL

- Fifteen (15) nos. 16A SP MCB. PB PANEL

PB PANEL

One (1) no. 32A TPN MCB. PB PANEL

PB PANEL

- Section-2 PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL


PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL


PB PANEL

- Space for installation of Nine (9) Nos. SP MCB PB PANEL

PB PANEL

- Section-2 PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

LABOUR RATE



PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL

- One (1) no. 6A SP MCB. PB PANEL

- Eighteen (18) nos. 10A SP MCB. PB PANEL

PB PANEL

- Five (5) nos. 16A SP MCB. PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL

- Three (3) nos. 6A SP MCB. PB PANEL

PB PANEL

- Nineteen (19) nos. 16A SP MCB. PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL

LABOUR RATE



PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL


PB PANEL

- Twelve (12) nos. 10A SP MCB. PB PANEL

PB PANEL

- Four (4) nos. 16A SP MCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL

- One (1) no. 6A SP MCB. PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL


PB PANEL

6.6.8 DB-EE-PB20-E8 : PB PANEL

PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


- Thirty (30) nos. 10A SP MCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL


LABOUR RATE


PB PANEL


PB PANEL


PB PANEL

DB-EE-PB20-E8 as described above and as per DB chart. 1 Set PB PANEL

PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL


PB PANEL

6.6.10 DB-EE-PB2M-D54 : PB PANEL

PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


LABOUR RATE


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL

- Thirty Three (23) nos. 10A SP MCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL

- Twenty Seven (27) nos. 16A SP MCB. PB PANEL

PB PANEL

- Four (4) nos. 32A TPN MCB. PB PANEL

PB PANEL

DB-EE-PB2M-D54 as described above and as per DB chart. 1 Set PB PANEL

6.6.11 DB-EE-PB3M-D2 : PB PANEL

PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL

- Twenty One (21) nos. 10A SP MCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL

- Sixteen (16) nos. 16A SP MCB. PB PANEL

PB PANEL


PB PANEL

DB-EE-PB3M-D2 as described above and as per DB chart. 1 Set PB PANEL

PB PANEL


LABOUR RATE


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL

- Fourty Five (45) nos. 10A SP MCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL


PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL


- Fourty Two (42) nos. 10A SP MCB. PB PANEL

PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL

LABOUR RATE


- Thirteen (13) nos. 16A SP MCB. PB PANEL

PB PANEL


PB PANEL


PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

PB PANEL


PB PANEL

- Thirty Three (33) nos. 10A SP MCB. PB PANEL

PB PANEL

Section-2 PB PANEL



PB PANEL


PB PANEL


PB PANEL


PB PANEL

Incomer: PB PANEL

PB PANEL


PB PANEL

Busbar : PB PANEL

PB PANEL


PB PANEL


PB PANEL

Section-1 PB PANEL

LABOUR RATE


PB PANEL


PB PANEL


PB PANEL

Section-2 PB PANEL

PB PANEL


PB PANEL


PB PANEL

- Four (4) nos. 32A TPN MCB. PB PANEL

PB PANEL


PB PANEL

7.00 CABLES, SUB MAINS & CABLE TRAYS : PB CAB

PB CAB

7.10 Cables in Under Ground Installations : PB CAB

PB CAB

PB CAB

PB CAB

7.1.1 PB CAB

PB CAB

a) 4 core 150 sqmm 10 RM PB CAB

b) 4 core 120 sqmm 10 RM PB CAB

c) 4 core 95 sqmm 10 RM PB CAB

d) 4 core 70 sqmm 10 RM PB CAB

e) 4 core 50 sqmm 10 RM PB CAB

f) 4 core 35 sqmm 10 RM PB CAB

g) 4 core 25 sqmm 10 RM PB CAB

PB CAB

7.20 Cables on Racks / Pipes / Ducts / Wireways/Cable Trays : PB CAB

PB CAB

PB CAB

PB CAB





LABOUR RATE


7.2.1 Copper Conductor Armoured Cables : PB CAB

PB CAB

a) 3.5 core 300 sqmm 50 RM PB CAB

b) 3.5 core 240 sqmm 200 RM PB CAB

c) 3.5 core 185 sqmm 50 RM PB CAB

d) 3.5 core 150 sqmm 370 RM PB CAB

e) 3.5 core 120 sqmm 10 RM PB CAB

f) 3.5 core 95 sqmm 160 RM PB CAB

g) 3.5 core 70 sqmm 50 RM PB CAB

h) 3.5 core 50 sqmm 680 RM PB CAB

i) 3.5 core 35 sqmm 650 RM PB CAB

j) 4 core 25 sqmm 1250 RM PB CAB

k) 4 core 16 sqmm 900 RM PB CAB

l) 4 core 10 sqmm 2900 RM PB CAB

m) 4 core 6 sqmm 40 RM PB CAB

n) 4 core 4 sqmm 10 RM PB CAB

o) 3 core 25 sqmm 10 RM PB CAB

p) 3 core 16 sqmm 10 RM PB CAB

q) 3 core 10 sqmm 10 RM PB CAB

r) 3 core 6 sqmm 10 RM PB CAB

s) 3 core 4 sqmm 1600 RM PB CAB

t) 2 core 6 sqmm 10 RM PB CAB

u) 2 core 4 sqmm 10 RM PB CAB

PB CAB

7.2.2 Copper Conductor Armoured Control Cables : PB CAB

PB CAB

a) 14 C 1.5 Sqmm PVC cable 10 RM PB CAB

b) 10 C 1.5 Sqmm PVC cable 10 RM PB CAB

c) 9 C 1.5 Sqmm PVC cable 10 RM PB CAB

d) 7 C 1.5 Sqmm PVC cable 10 RM PB CAB

e) 5 C 1.5 Sqmm PVC cable 10 RM PB CAB

f) 3 C 1.5 Sqmm PVC cable 10 RM PB CAB

PB CAB

7.30 Cable Termination : PB TERM

PB TERM

PB TERM

PB TERM

7.3.1 Copper conductor armoured cables : PB TERM

PB TERM

a) 3.5 core 300 sqmm 2 Nos. PB TERM

b) 3.5 core 240 sqmm 12 Nos. PB TERM

c) 3.5 core 185 sqmm 4 Nos. PB TERM

d) 3.5 core 150 sqmm 16 Nos. PB TERM


LABOUR RATE


e) 3.5 core 120 sqmm 2 Nos. PB TERM

f) 3.5 core 95 sqmm 16 Nos. PB TERM

g) 3.5 core 70 sqmm 20 Nos. PB TERM

h) 3.5 core 50 sqmm 46 Nos. PB TERM

i) 3.5 core 35 sqmm 44 Nos. PB TERM

j) 4 core 25 sqmm 92 Nos. PB TERM

k) 4 core 16 sqmm 46 Nos. PB TERM

l) 4 core 10 sqmm 268 Nos. PB TERM

m) 4 core 6 sqmm 4 Nos. PB TERM

n) 4 core 4 sqmm 2 Nos. PB TERM

o) 3 core 25 sqmm 2 Nos. PB TERM

p) 3 core 16 sqmm 2 Nos. PB TERM

q) 3 core 10 sqmm 2 Nos. PB TERM

r) 3 core 6 sqmm 2 Nos. PB TERM

s) 3 core 4 sqmm 164 Nos. PB TERM

t) 2 core 6 sqmm 2 Nos. PB TERM

u) 2 core 4 sqmm 2 Nos. PB TERM

PB TERM

7.3.2 Copper Conductor PVC Insulated Armoured Control Cables : PB TERM

PB TERM

PB TERM

a) 14 C x 1.5 Sqmm 2 Nos. PB TERM

b) 10 C x 1.5 Sqmm 2 Nos. PB TERM

c) 9 C x 1.5 Sqmm 2 Nos. PB TERM

d) 7 C x 1.5 Sqmm 2 Nos. PB TERM

e) 5 C x 1.5 Sqmm 2 Nos. PB TERM

f) 3 C x 1.5 Sqmm 2 Nos. PB TERM

PB TERM

Notes: PB TERM

PB TERM

7.40 PB CAB

PB CAB

a) 4 C x 185 Sqm, CWZ Cable 5 RM PB CAB

b) 4 C x 150 Sqm, CWZ Cable 5 RM PB CAB

c) 4 C x 120 Sqm, CWZ Cable 5 RM PB CAB

d) 4 C x 95 Sqm, CWZ Cable 5 RM PB CAB

e) 4 C x 70 Sqm, CWZ Cable 5 RM PB CAB

f) 4 C x 50 Sqm, CWZ Cable 5 RM PB CAB

g) 4 C x 35 Sqm, CWZ Cable 5 RM PB CAB




LABOUR RATE


h) 4 C x 25 Sqm, CWZ Cable 5 RM PB CAB

i) 4 C x 16 Sqm, CWZ Cable 5 RM PB CAB

j) 4 C x 10 Sqm, CWZ Cable 5 RM PB CAB

k) 4 C x 6 Sqm, CWZ Cable 5 RM PB CAB

l) 4 C x 4 Sqm, CWZ Cable 5 RM PB CAB

m) 4 C x 2.5 Sqm, CWZ Cable 5 RM PB CAB

PB CAB

7.50 Cable Trays : PB TRAY

PB TRAY

PB TRAY

PB TRAY

Notes: PB TRAY

PB TRAY

7.5.1 Ladder Type Cable tray : PB TRAY

PB TRAY

a) 900 mm x 75 mm x 2.0 mm 5 RM PB TRAY

b) 750 mm x 75 mm x 2.0 mm 5 RM PB TRAY

c) 600 mm x 75 mm x 2.0 mm 5 RM PB TRAY

d) 450 mm x 75 mm x 2.0 mm 5 RM PB TRAY

e) 300 mm x 75 mm x 2.0 mm 5 RM PB TRAY

f) 250 mm x 75 mm x 2.0 mm 5 RM PB TRAY

g) 200 mm x 75 mm x 2.0 mm 5 RM PB TRAY



PB TRAY

7.5.2 Perforated Type Cable Tray : PB TRAY

PB TRAY

a) 750 mm x 75 mm x 2.0 mm 10 RM PB TRAY

b) 600 mm x 75 mm x 2.0 mm 10 RM PB TRAY

c) 500 mm x 75 mm x 2.0 mm 10 RM PB TRAY

d) 400 mm x 75 mm x 2.0 mm 10 RM PB TRAY

e) 300 mm x 50 mm x 2.0 mm 50 RM PB TRAY

f) 250 mm x 50 mm x 2.0 mm 970 RM PB TRAY


h) 150 mm x 75 mm x 2.0 mm 1590 RM PB TRAY

i) 100 mm x 75 mm x 2.0 mm 350 RM PB TRAY

PB TRAY

7.5.3 Fibreglass Ladder Type Cable Tray : PB TRAY



LABOUR RATE


PB TRAY

PB TRAY

PB TRAY

a) 600 mm wide 5 RM PB TRAY

b) 450 mm wide 5 RM PB TRAY

c) 300 mm wide 5 RM PB TRAY

d) 225 mm wide 5 RM PB TRAY

e) 100 mm wide 5 RM PB TRAY

PB TRAY

7.60 Misc. Works Relating to Cabling: PB PIPE

PB PIPE

7.6.1 GI Pipe Installation : PB PIPE

PB PIPE

PB PIPE

PB PIPE

a) 25 mm dia 10 RM PB PIPE

b) 32 mm dia 10 RM PB PIPE

c) 40 mm dia 10 RM PB PIPE

d) 50 mm dia 10 RM PB PIPE

e) 80 mm dia 10 RM PB PIPE

f) 100 mm dia 10 RM PB PIPE

g) 150 mm dia 10 RM PB PIPE

7.6.2 Flexible Conduits Installation : PB PW

PB PW

PB PW

7.6.2.1 GI flexible conduits : PB PW

PB PW

a) 20 mm dia 100 RM PB PW

b) 25 mm dia 100 RM PB PW

c) 40 mm dia 100 RM PB PW

d) 50 mm dia 100 RM PB PW

PB PW

PB PW

8.00 WIRING : PB PW

PB PW

8.10 Point Wiring : PB PW





LABOUR RATE


PB PW

The rates for point wiring shall include the circuit wiring. PB PW

PB PW

PB PW

PB PW

PB PW

PB PW

PB PW

PB PW

PB PW

PB PW

PB PW

PB PW

8.1.1 Light Points controlled by switch : PB PW

PB PW

a) Single/ First light point con-trolled by a 5Amps switch. 103 No. PB PW

PB PW

b) Same as above but loop point 322 No. PB PW

PB PW

8.1.2 Light Points controlled directly from DB . PB PW

PB PW

i. Single/ First Point Controlled directly by MCB in DB 419 Nos. PB PW

PB PW

ii. Same as above but loop point. 3780 Nos. PB PW

PB PW

8.1.3 Light points controlled by Two Way Switch : PB PW

PB PW

i) 41 Nos. PB PW

PB PW

ii) Same as above but loop point. 256 Nos. PB PW

PB PW

8.1.5 Light points controlled by Push Buttons : PB PW

PB PW

i) One light points controlled by One Push Button. 1 Nos. PB PW

PB PW

ii) Two light points controlled by One Push Button. 41 Nos. PB PW







LABOUR RATE


PB PW

iii) Three light points controlled by One Push Button. 45 Nos. PB PW

PB PW

iv) Six light points controlled by Two Push Buttons. 39 Nos. PB PW

PB PW

v) Seven light points controlled by Two Push Buttons. 39 Nos. PB PW

PB PW

vi) Nine light points controlled by Two Push Buttons. 1 Nos. PB PW

8.1.6 Presence Sensor : PB PW

PB PW

a) 208 Nos. PB PW

PB PW

8.1.7 6A Socket Points : PB PW

PB PW

a) 215 Point PB PW

PB PW

8.1.8 FCU Points controlled by 6A Switch : PB PW

PB PW

i) 21 Nos. PB PW

PB PW

ii) Same as above but loop point. 38 Nos. PB PW

PB PW

8.20 Power Socket Wiring : PB PW

PB PW

PB PW

PB PW

8.2.1 43 Point PB PW

PB PW






LABOUR RATE



PB PW



PB PW


PB PW


PB PW






LABOUR RATE



PB PW

8.2.8 1 Point PB PW


PB PW


PB PW



Wiring for 3 Nos. BS, 16A, switched outlet & 2 Nos. BS 16A switched outlet in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of Wiring for 3 Nos. BS, 16A, switched outlet & 2 Nos. BS 16A switched outlet in IP-65 enclosure with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 2 Nos. BS, 16A, switched outlets in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 No. BS, 16A, switched outlets in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 2 Nos. BS, 16A, switched outlets and 1 No. 16A DP Isolators in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 No. BS, 16A, switched outlets and 1 No. 16A DP Isolator in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 3 Nos. BS, 16A, switched outlets and 1 No. 16A DP Isolator in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 3 Nos. BS, 16A, switched outlets and 1 No. 16A DP Isolator in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

LABOUR RATE


PB PW


PB PW



PB PW

8.2.15 7 Nos. PB PW

PB PW

Wiring for 1 No. BS, 16A, switched outlet (Spur Outlet) for Hand Dryer with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 16A, switched outlet (Spur Outlet) with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 1 No. Disabled Alarm Device with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. Disabled Alarm Device, Single phase motor of required capacity (As approved by the Engineer-in-charge) with internal wiring in G.I. box, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 1 No. 16A DP Isolators in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. 16A DP Isolator in IP-65 enclosure with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 1 No. Floor LV tank consisting of 4 Nos. 6A BS switched socket and 2 Nos. RJ-45 Data Outlets in IP-65 enclosure, with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. Floor LV tank consisting of 4 Nos. 6A BS switched socket and 2 Nos. RJ-45 Data outlets in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required.

LABOUR RATE



PB PW

8.30 CEE INDUSTRIAL SWITCHED SOCKETS PB PW

PB PW

8.3.1 PB PW

PB PW

a) 16A, 2P+E, CEE, switched socket outlet with plug top (IP-44) 82 Nos. PB PW

PB PW

b) 1 No. PB PW

PB PW

c) 40 No. PB PW

PB PW

d) 4 No. PB PW

PB PW

d) 36 No. PB PW

8.3.2 Socket Combination A PB PW

PB PW

PB PW

PB PW

- PB PW

PB PW

- PB PW

PB PW

- PB PW

Wiring for 2 Nos. 16A 2P+E CEE, switched, industrial type plug and socket outlet in IP-44 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos. 16A 2P+E CEE, switched, industrial type plug and socket outlet in IP-44 enclosure with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.






Supply, installation, testing and commissioning of following Single Phase/3 phase, CEE, switched, Industrial type Plug and socket Combination Outlet in single enclosure (IP-44) including termination, Earthing etc. in surface/recess mounting as required. (Conduiting/wiring/cabling for the same shall be paid seperately under different item).

One no. 16A, 2P+E, CEE, switched socket outlets with plug (IP-44) with 16A TPN MCB,10kA.

One no. 16A, 3P+N+E, CEE, switched socket outlets with plug (IP-44) with 16A TPN MCB,10kA.


LABOUR RATE


PB PW

- One no. 13A, BS switched socket outlet 39 Set PB PW

PB PW

8.3.3 Socket Combination B PB PW

PB PW

PB PW

PB PW

- PB PW

PB PW

- PB PW

PB PW

- PB PW

PB PW

- Two nos. 13A, BS switched socket outlet 122 Set PB PW

PB PW

8.3.4 Socket Combination C PB PW

PB PW

PB PW

PB PW

- PB PW

PB PW

- PB PW

PB PW

- PB PW

PB PW

- PB PW

PB PW

- One no. 13A, BS switched socket outlet 1 Set PB PW

8.40 ISOLATORS PB PW

PB PW

PB PW

PB PW


Two nos. 16A, 2P+E, CEE, switched socket outlets with plug (IP-44) with 16A TPN MCB,10kA.




One no. 16A, 2P+E, CEE, switched socket outlets with plug (IP-44) with 16A TPN MCB,10kA.





LABOUR RATE


a) 16A Four pole isolator 3 Nos. PB PW

PB PW

b) 63A Four pole isolator 19 Nos. PB PW

PB PW

c) 125A Four pole isolator 2 Nos. PB PW

PB PW

8.50 M.S. Black Conduits : PB PW

PB PW

PB PW

PB PW

a) 20 mm dia 20 RM PB PW

b) 25 mm dia 20 RM PB PW

c) 32 mm dia 20 RM PB PW

d) 40 mm dia 20 RM PB PW

e) 50 mm dia 20 RM PB PW

PB PW

8.60 Sub-mains Wiring : PB PW

PB PW

PB PW

PB PW

a) 2 x 1.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM PB PW

b) 2 x 2.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM PB PW

c) 2 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire. 20 RM PB PW

d) 2 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM PB PW

e) 4 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM PB PW

f) 4 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM PB PW

g) 2 x 10.0 Sqmm + 1 No. 6.0 Sqmm Copper earth wire 20 RM PB PW

h) 4 x 10.0 Sqmm + 2 Nos. 6.0 Sqmm Copper earth wire 20 RM PB PW

i) 4 x 16.0 Sqmm + 2 Nos. 10.0 Sqmm Copper earth wire 20 RM PB PW

j) 4 x 25.0 Sqmm + 2 Nos. 16.0 Sqmm Copper earth wire 20 RM PB PW

PB PW

Note: PB PW

PB PW

1) PB PW

PB PW

2) PB PW

PB PW

TOTAL OF WIRING CARRIED OVER TO SUMMARY PB PW

9.00 LIGHTING FIXTURES : PB LIGHT





LABOUR RATE


PB LIGHT

PB LIGHT

PB LIGHT

1.00 87 Set PB LIGHT

PB LIGHT


PB LIGHT

3.00 2 Set PB LIGHT

PB LIGHT

4.00 2 Set PB LIGHT

PB LIGHT

5.00 5 Set PB LIGHT

PB LIGHT

6.00 1 Set PB LIGHT

PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT













LABOUR RATE



PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT



Floodlight 400W (Siteco A2 Midi 400W IP65 asym or Equivalent) (T10)

Bulk Head Light Wall Mounted with 2 x 28W TC-DEL Lamp IP 65 (Thorn Danube 2x28W IP65 or Equivalent) (T11).

Bulk Head Light Wall Mounted with 2 x 28W TC-DEL Lamp IP 65 (Thorn Danube 2x28W IP65 or Equivalent) (T11) complete with emergency lighting units.




Recessed Luminaire with 4 x 18W T5 Lamps with Parabolic Louvre (Thorn Omega BS/SB 4 x 18W or Equivalent) (T14) complete with emergency lighting units.


Recessed Quad 2 x 18W (Thorn Matrix 300 2 x 18W or Equivalent) (T15) complete with emergency lighting units.


Recessed outside Downlight IP54 (Trilux Downlight IP54 or Equivalent) (T21) complete with emergency lighting units.


Recessed Luminaire 2 x 58W IP65 (Thorn Duopre 2 x 58W T26 H2F or Equivalent) (T23) complete with emergency lighting units.

LABOUR RATE



PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT


PB LIGHT

PB LIGHT

10.00 EARTHING & LIGHTNING PROTECTION SYSTEM : PB EARTH

PB EARTH

10.10 Earthing System: PB EARTH

PB EARTH

10.1.1 8 Nos. PB EARTH

PB EARTH


PB EARTH


PB EARTH

10.1.4 Earthing Strip/Tape/Cables : PB EARTH

PB EARTH

Wall Luminaire 2x36W IP44 (Bega 4422-2 TC-L 2x36W IP44 or Equivalent) (T30)



Emergency Exit Left Fixture (Cooper/Crompton or Equivalent) complete with emergency lighting units.

Emergency Exit Right Fixture (Cooper/Crompton or Equivalent) complete with emergency lighting units.





LABOUR RATE


PB EARTH

PB EARTH

G.I. Earthing strip/tape : PB EARTH

PB EARTH

a 75 x 8 mm strip 50 RM PB EARTH

b 75 x 6 mm strip 50 RM PB EARTH

c 50 x 6 mm strip 10 RM PB EARTH

d 40 x 6 mm strip 50 RM PB EARTH

e 32 x 6 mm strip 10 RM PB EARTH

f 25 x 6 mm strip 50 RM PB EARTH

g 25 x 3 mm strip 1100 RM PB EARTH

PB EARTH

Tinned Copper earthing strip/tape : PB EARTH

PB EARTH

a) 50 x 6 mm 10 RM PB EARTH

b) 32 x 6 mm 10 RM PB EARTH

c) 25 x 6 mm 10 RM PB EARTH

d) 25 x 3 mm 10 RM PB EARTH

PB EARTH

10.1.5 PB CAB

PB CAB

a) 1C x 240 Sqm 200 RM PB CAB

PB CAB

b) 1C x 185 Sqm 300 RM PB CAB

PB CAB

c) 1C x 90 Sqm 500 RM PB CAB

PB CAB

d) 1C x 50 Sqm 2000 RM PB CAB

PB CAB

10.1.6 PB EARTH

PB EARTH

75 x 6 mm GI Earth Bars. PB EARTH


10.1.4.1

10.1.4.2


Supply, installation, Termination, testing and Commissioning of following sizes tinned Cu/GI Earth Bars including its supporting/fixing hardware, as per drawings, specifications and as directed by Engineer-in-charge.

10.1.6.1

LABOUR RATE


PB EARTH

a) 300 mm 1 No. PB EARTH

b) 500 mm 1 Nos. PB EARTH

c) 750 mm 1 Nos. PB EARTH

d) 1000 mm 1 No. PB EARTH

PB EARTH


PB EARTH

a) 300 mm 1 Nos. PB EARTH



d) 1000 mm 1 Nos. PB EARTH

PB EARTH

75 x 6 mm tinnned Cu Earth Bars. PB EARTH

PB EARTH

a) 300 mm 1 No. PB EARTH



d) 1000 mm 1 No. PB EARTH

PB EARTH

50 x 6 mm tinned Cu Earth Bars. PB EARTH

PB EARTH





10.20 Lightning Protection System: PB EARTH

PB EARTH


PB EARTH


PB EARTH

10.1.6.2

10.1.6.3

10.1.6.4



LABOUR RATE


10.2.3 Earthing Strip/Wires : PB EARTH

PB EARTH

PB EARTH

PB EARTH

a) 25 x 3 mm strip 1100 RM PB EARTH

PB EARTH

b) 25 x 6 mm strip 2400 RM PB EARTH

PB EARTH

10.2.4 PB EARTH

PB EARTH


PB EARTH





PB EARTH


PB EARTH






PB EARTH


PB EARTH

Supply, installation, testing and commissioning of following sizes of GI strip/wire clamped to walls, Ductwork, pipe work, Structural steel work, cladding work etc. in recess or surface etc for Lightning Protection System complete as required including inter connection, terminations, between length at joints, all fixing accessories saddles, plastic isolator mounting (of 50mmx80mm approx.), Sealing Collars, Sealing Strip, Squared Timber Block (80mmx100mm approx.), clamps, Lugs etc and other fixing hardware material as required for proper installation as per detail drawings, specifications and direction of Engineer-in-charge.


10.2.4.1

10.2.4.2



LABOUR RATE


PB EARTH

MC-1 EARTH

MC-1 MC-1 EARTH

1.00 11 KV, GAS INSULATED, RING MAIN UNITS: MC-1 HTO

MC-1 HTO

1.10 MC-1 HTO

MC-1 HTO

a) MC-1 HTO

MC-1 HTO

b) 1 Set MC-1 HTO

MC-1 HTO

Notes : MC-1 HTO

MC-1 HTO

i) MC-1 HTO

MC-1 HTO

ii) MC-1 HTO

MC-1 HTO

1.20 Battery & Battery Charger : MC-1 BATT

MC-1 BATT

a) MC-1 BATT

MC-1 BATT

i) for 24V DC System ur Set MC-1 BATT

MC-1 BATT

ii) for 110V DC System 1 Set MC-1 BATT

MC-1 BATT

b) MC-1 BATT

MC-1 BATT

i) for 24V DC System ur Set MC-1 BATT

MC-1 BATT


Safe Unloading, Receiving, storing, checking, handling, installation, testing and commissioning of 350 MVA, 11 KV indoor 4 way, SF6 insulated, Extensible Ring Main Breaker Unit consisting of following :-

Two (2) Nos. 630 Amp, TP VCB with disconnector and Earth Switch as Incommers, with required Indication, Metering and Protection System.

Two (2) Nos. 630 Amp, TP VCB with disconnector and Earth Switch as Outgoings, with required Indication, Metering & Protection System.

Installation shall include supply of all Hardware material (excluding civil work) as required and as per Approved Shop Drawings.

Necessary Co-ordination with client and manufacturer to be done by the contractor for successful installation, Testing and Commissioning.

Supply, installation, testing & commissioning of 200 AH capacity, Ni-cd maintenance free batteries, duly charged, complete with seasoned teak wood stand, connecting lead as required for 11 KV RMU boards and some other control loads. (AH calculation to be submitted by successful bidder in co-ordination with the client and 11 KV, RMU Vendor).

Supply, installation, testing & commissioning of suitable float cum boost battery charger and necessary distribution board with 12 Nos. 16A outgoing feeders, instrument panel, Amp, Volts meter, interconnections etc. power supply 240 V, 1 phase, 50 Hz ± 10%. Charger trouble annunciation shall be provided through potential free contacts.

LABOUR RATE


ii) for 110V DC System 1 Set MC-1 BATT

MC-1 BATT

2.00 H T CABLING : MC-1 CAB

MC-1 CAB

2.10 11kV Cable laying : MC-1 CAB

MC-1 CAB

MC-1 CAB

MC-1 CAB

2.1.1 Underground: MC-1 CAB

MC-1 CAB

MC-1 CAB

MC-1 CAB

a) 3C x 400 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

b) 3C x 300 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

c) 3C x 240 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

d) 3C x 185 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

e) 3C x 150 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

f) 3C x 120 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

g) 3C x 95 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

h) 3C x 70 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

i) 3C x 50 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

2.1.2 In hume pipe/trays/trenches : MC-1 CAB

MC-1 CAB

MC-1 CAB

MC-1 CAB

a) 3C x 400 Sqmm, 11KV XLPE 10 Mtr. MC-1 CAB

MC-1 CAB

b) 3C x 300 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

c) 3C x 240 Sqmm, 11KV XLPE 50 Mtr MC-1 CAB

MC-1 CAB

TOTAL OF 11 KV, GAS INSULATED, RING MAIN UNITS CARRIED OVER TO SUMMARY

Supplying, laying, testing and commissioning of 11 KV grade copper conductor, cross linked polyethylene (XLPE) insulated individual core screened extruded inner sheath, flat steel/strip armoured PVC sheathed cable and suitable for (E) system complete as required and as per specification, as follows:

Supply and laying of following size of 11 KV cables in earth as per drawing, specifications and direction of engineer in charge.

Supply and laying of following sizes of 11KV cables on already laid trays/hume pipes/walls/ trench etc, as required, as per drawing, specifications and direction of Engineer-in-charge..

LABOUR RATE


d) 3C x 185 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

e) 3C x 150 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

f) 3C x 120 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

g) 3C x 95 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

h) 3C x 70 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

i) 3C x 50 Sqmm, 11KV XLPE 10 Mtr MC-1 CAB

MC-1 CAB

2.20 End Termination (HT) : MC-1 TERM

MC-1 TERM

MC-1 TERM

MC-1 TERM

a) 3C x 400 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

b) 3C x 300 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

c) 3C x 240 Sqmm, 11KV XLPE 4 Set MC-1 TERM

MC-1 TERM

d) 3C x 185 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

e) 3C x 150 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

f) 3C x 120 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

g) 3C x 95 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

h) 3C x 70 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

i) 3C x 50 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

2.30 End Termination (HT) : MC-1 TERM

MC-1 TERM

MC-1 TERM

MC-1 TERM

a) 3C x 400 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

b) 3C x 300 Sqmm, 11KV XLPE 2 Set MC-1 TERM

MC-1 TERM

Cable jointing of 11 KV grade, XLPE insulated, armoured, Copper Conductor cable with suitable cable termination KITS including all accessories i.e. Sockets, lugs, gland etc as required, as per drawings, specifications and direction of Engineer-in-charge.

Cable jointing of 11 KV grade, XLPE insulated, armoured, Aluminium Conductor cable with suitable cable termination KITS including all accessories i.e. Sockets, lugs, gland etc as required, as per drawings, specifications and direction of Engineer-in-charge.

LABOUR RATE


c) 3C x 240 Sqmm, 11KV XLPE 2 Set MC-1 TERM

MC-1 TERM

d) 3C x 185 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

e) 3C x 150 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

f) 3C x 120 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

g) 3C x 95 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

h) 3C x 70 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

i) 3C x 50 Sqmm, 11KV XLPE 1 Set MC-1 TERM

MC-1 TERM

Notes : MC-1 TERM

MC-1 TERM

1.00 MC-1 TERM

MC-1 TERM

2.00 MC-1 TERM

MC-1 TERM

TOTAL OF H.T CABLING CARRIED OVER TO SUMMARY MC-1 TERM

3.00 SUB STATION SAFETY EQUIPMENT : MC-1 MISC

MC-1 MISC

3.10 MC-1 MISC

MC-1 MISC

a) 11 KV grade size 1000 x 900 x 25 mm thick 5 Nos. MC-1 MISC

MC-1 MISC

b) 1100 V grade size 1000 x 900 x 15 mm thick 5 Nos. MC-1 MISC

MC-1 MISC

3.20 1 No. MC-1 MISC

MC-1 MISC

3.30 5 Nos. MC-1 MISC

MC-1 MISC

3.40 Providing 11 KV tested hand gloves. 1 Pair MC-1 MISC

MC-1 MISC

3.50 Providing 11 KV insulated grounding rod. 1 No. MC-1 MISC

MC-1 MISC

The cable and cable terminations quantities given above, are approximate. The contractor shall measure the cables required at site and procurement order shall be place accrodingly.

Wherever copper cable to be connected to Aluminium Bus Bar or vis-à-vis., Bimetalic lugs to be used for terminations.




LABOUR RATE


3.60 Providing first aid box as per IS:13115. 1 Set MC-1 MISC

MC-1 MISC

MC-1 MISC

4.00 TRANSFORMER: MC-1 TRAFO

MC-1 TRAFO

MC-1 TRAFO

MC-1 TRAFO

a) 2000 KVA ur Set MC-1 TRAFO

b) 1600 KVA 2 Set MC-1 TRAFO

c) 1250 KVA ur Set MC-1 TRAFO

d) 1000 KVA ur Set MC-1 TRAFO

e) 800 KVA ur Set MC-1 TRAFO

f) 630 KVA ur Set MC-1 TRAFO

g) 500 KVA ur Set MC-1 TRAFO

h) 315 KVA ur Set MC-1 TRAFO

MC-1 TRAFO

Notes : MC-1 TRAFO

MC-1 TRAFO

i) MC-1 TRAFO

MC-1 TRAFO

ii) MC-1 TRAFO

MC-1 TRAFO

MC-1 TRAFO

MC-1 BBT

5.0 BUS DUCT/BUS BAR TRUNKING SYSTEM : MC-1 BBT

MC-1 BBT

5.1 Bus Duct : MC-1 BBT

MC-1 BBT


Unloading,Receiving, storing, handling, installation, testing and commissioning of 11 kV/ 400V (terminal voltage), 3 phase, 50 Hz delta/star connected, copper winding. indoor type, natural air cooled, dry type, cast resin transformer of following ratings, complete with all fittings such as thermometer, off circuit tap changer with + 5 % to –15%, tapping at the step of 2.5% bi-directional roller, diagrams & rating plate & Winding temperature indicator, lifting lugs, H. T. cable box/ LT Terminal Box suitable for bus duct / Cable termination etc. complete as per relevant specifications, drawings and direction of Engineer-in-charge.

Installation rate shall include unloading, receiving including storage at site,assembly, erection, testing and commissioning etc. as required, as per approved Shop Drawing and as per direction of Engineer-in-charge..

Necessary co-ordination with the manufacturer and client shall be done by the contractor without extra cost.

TOTAL OF TRANSFORMER CARRIED OVER TO SUMMARY

LABOUR RATE


MC-1 BBT

MC-1 BBT

a)

RM R.O.

MC-1 BBT

MC-1 BBT

b)

RM R.O.

MC-1 BBT

MC-1 BBT

c)

RM 55

MC-1 BBT

MC-1 BBT

5.2 Bus Bar Trunking (BBT) : MC-1 BBT

MC-1 BBT

5.2.1

MC-1 BBT

MC-1 BBT

MC-1 BBT

MC-1 BBT

i)RM R.O.

MC-1 BBT

MC-1 BBT

ii)RM R.O.

MC-1 BBT

MC-1 BBT

iii)RM R.O.

MC-1 BBT

MC-1 BBT

iv)RM R.O.

MC-1 BBT

MC-1 BBT

Design, manufacturing, supply, installation, testing & commissioning (at site) of sheet steel enclosed 3 phase & neutral, 400V, 50 Hz., 50 KA copper conductor bus duct with insulation of thermal rating confirming to class 'H' including bends, transposition piece, expansion joint, Tees, End termination units, Feeder units, tap off unit etc. with all flexible connections as per specifications and drawings with all accessories, supports and termination of bus duct to switchgear/transformer.










LABOUR RATE


v)RM R.O.

MC-1 BBT

vi)RM 10

MC-1 BBT

MC-1 BBT

vii)RM 10

MC-1 BBT

MC-1 BBT

viii)RM 10

MC-1 BBT

MC-1 BBT

ix)RM 10

MC-1 BBT

MC-1 BBT

Notes: MC-1 BBT

MC-1 BBT

a)MC-1 BBT

MC-1 BBT

b) Rates shall be inclusive of all accessories & fittings. MC-1 BBT

MC-1 BBT

5.2.2

MC-1 BBT

MC-1 BBT

i) 250A, TPN MCCB Tap off box. No. 1 MC-1 BBT

MC-1 BBT

ii) 125A TPN MCCB Tap off box. No. 1 MC-1 BBT

MC-1 BBT

iii) 100A TPN MCCB Tap off box. No. 1 MC-1 BBT

MC-1 BBT

iv) 80A TPN MCCB Tap off box. No. 1 MC-1 BBT

MC-1 BBT

v) 63A TPN MCCB Tap off box. No. 1 MC-1 BBT

MC-1 BBT

vi) 40A TPN MCCB Tap off box. No. 1 MC-1 BBT

MC-1 BBT

vii) 32A TPN MCCB Tap off box. No. 1 MC-1 BBT

MC-1 BBT

5.2.3

MC-1 BBT

MC-1 BBT

a) 1500 Amp with 1600 Amp, TPN, 40 KA, MDO ACB. Nos. R.O. MC-1 BBT









LABOUR RATE


MC-1 BBT

b) 1250 Amp with 1250 Amp, TPN, 40 KA, MDO ACB. Nos. R.O. MC-1 BBT

MC-1 BBT

c) 1200 Amp with 1200 Amp, TPN, 40 KA, MDO ACB. Nos. R.O. MC-1 BBT

MC-1 BBT

d) 1000 Amp with 1000 Amp, TPN, 40 KA, MDO ACB. Nos. R.O. MC-1 BBT

MC-1 BBT

e) 800 Amp with 800 Amp, TPN, 40 KA, MDO ACB. No. 1 MC-1 BBT

MC-1 BBT

f) 630 Amp with 630 Amp, TPN, 40 KA, MCCB. No. 1 MC-1 BBT

g) 400 Amp with 400 Amp, TPN, 40 KA, MCCB. No. 1 MC-1 BBT

MC-1 BBT

h) 250 Amp with 250 Amp, TPN, 40 KA, MCCB. No. 1 MC-1 BBT

MC-1 BBT

MC-1 BBT

5.2.4 MC-1 PANEL

MC-1 PANEL

- MC-1 PANEL

MC-1 PANEL

- MC-1 PANEL

MC-1 PANEL

- MC-1 PANEL

MC-1 PANEL

a) ur Nos. MC-1 PANEL

MC-1 PANEL

b) ur Nos. MC-1 PANEL

MC-1 PANEL

c) ur Nos. MC-1 PANEL

MC-1 PANEL

Notes: MC-1 PANEL

MC-1 PANEL

i) MC-1 PANEL

MC-1 PANEL







Bus Coupler Panel with 630 Amp, 400V, 40 KA @ 1 Sec, 4 Pole, Motorised MCCB


LABOUR RATE


ii) MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

6.000 LV SWITCHGEAR PANELS & DISTRIBUTION BOARDS: MC-1 PANEL

MC-1 PANEL

LV SWITCHGEAR PANELS : MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

Important Notes: Common for all Switchboard: MC-1 PANEL

MC-1 PANEL

1.000 MC-1 PANEL

MC-1 PANEL

2.000 Fault current wherever mentioned shall be Ics value. MC-1 PANEL

MC-1 PANEL

3.000 MC-1 PANEL

MC-1 PANEL

4.000 All feeder doors shall have pad locking arrangement. MC-1 PANEL

MC-1 PANEL

5.000 All TP feeders shall have solid isolable neutral link. MC-1 PANEL

MC-1 PANEL



Design, manufacture, supply, unloading, receiving, storing, handling, installation, testing and commissioning of following LV panels suitable for 400 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, Copper bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of as indicated elsewhere or shown in Single Line Diagram (Dwg No. E/SP/ME1 5.S.01.01.REV. B).

The BOQ shall be read inconjunction with general notes, specification and Single Line Diagram (Dwg. No. E/SP/ME1 5.S.01.01.REV B). Incase of any discrepancy between specification, BOQ and SLD, the same shall be brought to the notice of Employer before quoting the rates, otherwise stringent condition shall be deemed to have been considered.


LABOUR RATE


6.000 MC-1 PANEL

MC-1 PANEL

7.000 All power contactors including NIC shall be of AC3 duty. MC-1 PANEL

MC-1 PANEL

8.000 MC-1 PANEL

MC-1 PANEL

9.000 MC-1 PANEL

10.000 MC-1 PANEL

MC-1 PANEL

11.000 Capacitor shall be super heavy duty type (MPP technology). MC-1 PANEL

MC-1 PANEL

12.000 MC-1 PANEL

MC-1 PANEL

13.000 MC-1 PANEL

MC-1 PANEL

14.000 MC-1 PANEL

MC-1 PANEL

15.000 All CT, PT shall be epoxy resin cast. MC-1 PANEL

MC-1 PANEL

16.000 All meters are digital type. MC-1 PANEL

MC-1 PANEL

17.000 MC-1 PANEL

MC-1 PANEL

18.000 MC-1 PANEL

MC-1 PANEL

19.000 MC-1 PANEL

MC-1 PANEL

20.000 Bus bar chamber shall be kept at top of the all panels. MC-1 PANEL

MC-1 PANEL

21.000 MC-1 PANEL

MC-1 PANEL

22.000 MC-1 PANEL













LABOUR RATE


MC-1 PANEL

23.000 All indicating light shall be LED type . MC-1 PANEL

MC-1 PANEL

24.000 MC-1 PANEL

MC-1 PANEL

25.000 MC-1 PANEL

MC-1 PANEL

26.000 MC-1 PANEL

MC-1 PANEL

6.100 LV PANEL 1 & 2. MC-1 PANEL

Location: Ground Floor MC-1 PANEL

MC-1 PANEL

LV PANEL 1 & 2 shall Comprise of the following: MC-1 PANEL

MC-1 PANEL

a) Incomings: MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

b) MC-1 PANEL

MC-1 PANEL

Each incoming breaker shall be provided with MC-1 PANEL

MC-1 PANEL

i) MC-1 PANEL

MC-1 PANEL

ii) MC-1 PANEL

MC-1 PANEL

iii) MC-1 PANEL

MC-1 PANEL

iv) One set (3 Nos) phase indication lamp with backup SP MCB. MC-1 PANEL




Two (2) Nos. 2500 Amps, 400 V, 50kA TPN draw out, Electrically operated ACB, with ON/OFF/TRIP/Trip circuit healthy indication lamp and TNC control switch, under voltage & shunt trip release, anti pumping protection microprocessor based O/C, S/C & E/F protection etc. complete as required and as per SLD for Transformer Supply Feeder.

One (1) no. 3000 Amps, 400 V, 50KA four pole EDO ACB Bus coupler breaker complete with under voltage and shunt trip release, anti pumping protection, ON/OFF/ indication etc. to be electrically and mechanically interlocked with the incommers so that necessary interlocking can be achieved as per approved SLD.


One (1) No. Digital Multifunction meter with RS-485 port suitable for measurement of voltage, currents, Power Factor, Frequency,Power , Energy, harmonics and hours run (EM6400 of 'Conzerv' make or equivalent).



LABOUR RATE


MC-1 PANEL

v) MC-1 PANEL

MC-1 PANEL

1.000 WTI Alarm MC-1 PANEL

2.000 WTI Trip MC-1 PANEL

3.000 REF Trip MC-1 PANEL

4.000 HT Breaker Trip MC-1 PANEL

MC-1 PANEL

c) MC-1 PANEL

MC-1 PANEL

Each Transformer breaker to be provided with : MC-1 PANEL

MC-1 PANEL

i) MC-1 PANEL

MC-1 PANEL

ii) MC-1 PANEL

MC-1 PANEL

iii) MC-1 PANEL

MC-1 PANEL

Notes : MC-1 PANEL

MC-1 PANEL

1.000 MC-1 PANEL

MC-1 PANEL

2.000 MC-1 PANEL

MC-1 PANEL

d) BUS BARS: MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

e) Outgoing: MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

Section-1 MC-1 PANEL

MC-1 PANEL

i) Two (2) Nos. 800 A, 50 KA, TPN MDO ACB. MC-1 PANEL

MC-1 PANEL

ii) One (1) No. 630 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL







Operation interlocks as per specification & drawings indicating sufficient nos. of potential free contacts for interlocking/ indication annunciation/ control etc shall be provided by the bidder as required.

Two (2) Sets of 3000Amp.,50kA, TPN+E, Copper Bus bar with colour coded, heat shrinkable sleeves (with 100% neutral). Earth Bus shall be of 50 x 6 mm copper.

Some of the outgoing feeders shall be provided with earth leakage relays with CBCT of suitable size as per SLD, (E/SP/ME1 5.S.01.01 Rev. B).

LABOUR RATE


iii) One (1) No. 400 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

iv) Two (2) Nos. 200 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

v) Five (5) Nos. 100 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

vi) Five (5) Nos. 63 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

vii) Eight (8) Nos. 40 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

viii) Four (4) Nos. 32 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

i) One (1) No. 800 A, 50 KA, TP MDO ACB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

iii) Six (6) Nos. 250 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

iv) One (1) No. 200 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

v) Two (2) Nos. 160 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

vi) Six (6) Nos. 125 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

vii) One (1) No. 100 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

viii) Two (2) Nos. 63 A, 50 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

1 Set MC-1 PANEL

MC-1 PANEL

6.200 Capacitor Panels (400 kVAR) MC-1 PANEL

MC-1 PANEL

a) Incoming : MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

b) Metering, Indication and Protection : MC-1 PANEL

MC-1 PANEL

- MC-1 PANEL

MC-1 PANEL

- MC-1 PANEL

MC-1 PANEL

LV Panel 1 & 2 described as above (from a to e) and as per SLD

One (1) No. 800A, 50KA, TPN MDO ACB, incomer with 10 step APFC relay with Auto/Manual selector switch, timer, aux. Contactor, louvers, Exhaust fan etc.

One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CTs of ratio 800A /5A, CL 1.0, 15 VA.

One (1) set of RYB phase indication lamps with control SP MCB.

LABOUR RATE


c) Busbar : MC-1 PANEL

MC-1 PANEL

- MC-1 PANEL

MC-1 PANEL

d) Outgoings : MC-1 PANEL

- 2 Set MC-1 PANEL

MC-1 PANEL

Notes: MC-1 PANEL

MC-1 PANEL

1.000 MC-1 PANEL

2.000 MC-1 PANEL

MC-1 PANEL

3.000 MC-1 PANEL

MC-1 PANEL

6.300 GENERATOR PANEL MC-1 PANEL

MC-1 PANEL

Generator Panel shall Comprise of the following: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

b) Metering & indication for incoming breakers: MC-1 PANEL

MC-1 PANEL

Incoming breaker shall be provided with MC-1 PANEL

MC-1 PANEL

i) MC-1 PANEL

MC-1 PANEL

ii) MC-1 PANEL

MC-1 PANEL

iii) One set (3 Nos) phase indication lamp with backup SP MCB. MC-1 PANEL

MC-1 PANEL

1000A, TPN+E, Cu. Busbar insulated with heat shrinkable sleeves and shall be color coded. Earth Bus of 50 x 6 mm copper shall be provided.

400 KVAR Capacitor Panel in steps of 6 nos. of 2 x 25 kVAR banks, 4 Nos. of 1 x 25 kVAR banks.

Each capacitor bank should have its individual MCCB & Contactor suitable for capacitor duty including fuses for each capacitor unit as per specifications and approved SLD.

Enclosure of capacitor panel shall be liberally designed to take care of internal heat emission by capacitor unit without forced cooling and to limit the temperature rise with in permissible limit. However, louvers are allowed to facilitate extra cooling.

Enclosure of capacitor panel shall be designed so that detuned reactors can be installed in the same panel for harmonics reduction, in future.

One (1) No. 630 Amps, 400 V, 40kA TPN MCCB, with ON/OFF/TRIP and TNC control switch, under voltage & shunt trip release, microprocessor based O/C, S/C & E/F protection releases etc. complete as required for DG Supply Feeder.

One (1) No. Digital Multifunction meter with RS-485 port suitable for measurement of voltage, currents, Power Factor, Frequency,Power, Energy, harmonics and hours run (EM6400 of 'Conzerv' make or equivalent).


LABOUR RATE


Note: MC-1 PANEL

MC-1 PANEL

c) BUS BARS: MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

d) Outgoing: MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

i) One (1) No. 630 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

ii) Two (2) Nos. 100 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

iii) Two (2) Nos. 63 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

iv) One (1) No. 40 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

v) One (1) No. 32 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

1 Set MC-1 PANEL

6.400 SMDB-EE-ME1.30-C8-TR1.01 MC-1 PANEL

MC-1 PANEL

SMDB shall Comprise of the following: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

i) MC-1 PANEL

MC-1 PANEL

ii) MC-1 PANEL

MC-1 PANEL


800Amp., 40kA, TPN+E, Copper Bus bar with colour coded, heat shrinkable sleeves (with 100% neutral). Earth Bus Bar of 40 x 6 mm Copper shall be provided.

Each outgoing feeder shall be provided with Earth leakage relay and CBCT of suitable size as per SLD (E/SP/ME1 5.S.01.01, Rev. B)

Generator Panel described as above (from a to d) and as per SLD (E/SP/ME1 5.S.01.01 Rev. B)

One (1) No. 800 Amps, 400 V, 40kA TPN draw out, Electrically operated ACB, with ON/OFF/TRIP/Trip circuit healthy indication lamp and TNC control switch, under voltage & shunt trip release, anti pumping protection microprocessor based O/C, S/C & E/F protection etc. complete as required.



LABOUR RATE



MC-1 PANEL

Note: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

i) Twelve (12) Nos. 100 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

iii) Six (6) Nos. 63 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

iv) Two (2) Nos. 40 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

v) Five (5) Nos. 32 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

vi) Three (3) Nos. 16 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

1 Set MC-1 PANEL

MC-1 PANEL

6.500 SMDB-EE-ME1-OM-C4-TR1.01 MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL



Some of the outgoing feeders shall be provided with Earth leakage relay with CBCT of suitable size as per SLD (E/SP/ME1 5.S.01.01, Rev. B).

SMDB-EE-ME1.30-C8-TR1.01 described as above (from a to d) and as per SLD

One (1) No. 400 Amps, 400 V, 40kA TPN MCCB, with ON/OFF/TRIP indication lamp and TNC control switch, under voltage & shunt trip release with microprocessor based O/C, S/C & E/F protection etc. complete as required and as per SLD (E/SP/ME1 5.S.01.01 Rev. B).

LABOUR RATE


i) MC-1 PANEL

MC-1 PANEL

ii) MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Note: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

i) Three (3) Nos. 100 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

iii) Two (2) Nos. 40 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

iv) Four (4) Nos. 16 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL

1 Set MC-1 PANEL

MC-1 PANEL

6.600 SMDB-EE-ME1.O1-E1-TR1.01 MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

b) Metering & indication for incoming breaker: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

i) MC-1 PANEL





SMDB-EE-ME1,OM-C4-TR1.01 described as above (from a to d) and as per SLD

One (1) No. 630Amps, 400 V, 40kA TPN MCCB, with ON/OFF/TRIP/ indication lamp and TNC control switch, under voltage & shunt trip release with microprocessor based O/C, S/C & E/F protection etc. complete as required and as per SLD (E/SP/ME1 5.S.01.01, Rev. B).


LABOUR RATE


MC-1 PANEL

ii) MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Note: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

i) Three (3) Nos. 250 A, 40 KA, TPN MCCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

1 Set MC-1 PANEL

MC-1 PANEL

6.700 FINAL DISTRIBUTION BOARDS MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

MC-1 PANEL

6.7.1 DB-EE-ME1.00-E2-TR1.01 MC-1 PANEL

MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL

- 100A TP MCB Isolator. MC-1 PANEL

MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL

- 150A 4P Cu. busbar MC-1 PANEL

MC-1 PANEL

Outgoing – (10KA) comprising MC-1 PANEL



800Amp., 40kA, TPN+E, Copper Bus bar with colour coded, heat shrinkable sleeves (with 100% neutral). Earth Bus shall be of 40 x 6 copper.

Each outgoing feeder shall be provided with earth leakage relay with CBCT of suitable size as per SLD (E/SP/ME1 5.S.01.01, Rev. B).

SMDB-EE-ME1.01-E1-TR1.01 described as above (from a to e) and as per SLD

Design, manufacture, supply, installation (recessed/ surface), testing and commissioning of following switch fuse Unit/ MCCB/MCB type distribution boards as per drawings & specifications. The surface distribution boards shall be mounted on 50 x 50 x 6 MS angle frame work grounted to floor/ walls. The rate includes the angle iron frame, support, painting, numbering, earthing etc as required.

LABOUR RATE


MC-1 PANEL


MC-1 PANEL

- One (1) no. 16A 3 Phase RCD (100 mA). MC-1 PANEL

MC-1 PANEL

- Six (6) nos. 10A SP MCB. MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Three (3) nos. 20A SP MCB. MC-1 PANEL

MC-1 PANEL

- One (1) no. 20A TP MCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

- One (1) no. 63A, 3 Phase RCD (30 mA). MC-1 PANEL

MC-1 PANEL

- Six (6) nos. 20A, SP MCB. MC-1 PANEL

MC-1 PANEL

- Two (2) nos. 20A, TP MCB. MC-1 PANEL

MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL

6.7.2 DB-EE-ME1.00-D1TR1.02 MC-1 PANEL

MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Twenty One (21) Nos. 10A SP MCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

DB-EE-ME1.00-E2-TR1.01 as described above and as per DB chart

LABOUR RATE


- Two (2) nos. 20A TP MCB. MC-1 PANEL

MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL

6.7.3 ME1.00-E2-TR1.03 MC-1 PANEL

MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Twenty One (21) nos. 20A SP MCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

- One (1) no. 63A, 3 Phase, RCD (30 mA). MC-1 PANEL

MC-1 PANEL

- Twenty Seven (27) nos. 20A SP MCB. MC-1 PANEL

MC-1 PANEL

- ME1.00-E2-TR1.03 as described above and as per DB chart 1 Set MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Eighteen (18) nos. 10A, SP MCB. MC-1 PANEL

DB-EE-ME1.00-D1TR1.02 as described above and as per DB chart.

LABOUR RATE


MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL

6.7.5 DB-EE-ME1.00-D2-TR1.05 MC-1 PANEL

MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Twenty One (21) nos. 20A, SP MCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Twenty Seven (27) no. 20A SP MCB. MC-1 PANEL

MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


DB-EE-ME1.00-D2-TR1.05 as described above and as per DB chart

LABOUR RATE


- 1 Set MC-1 PANEL

6.7.7 DB-EE-ME1.00-B2-TR1.07 MC-1 PANEL

MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Twenty One (21) nos. 20A, SP MCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Twenty Seven (27) nos. 20A, SP MCB. MC-1 PANEL

MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL

6.7.8 DB-EE-ME1.00-B2-TR1.08 MC-1 PANEL

MC-1 PANEL

Incomer: MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL


MC-1 PANEL


MC-1 PANEL



MC-1 PANEL


MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


DB-EE-ME1.00-B2-TR1.07 as described above and as per DB chart

DB-EE-ME1.00-B2-TR1.08 as described above and as per DB chart

LABOUR RATE


Incomer: MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL


MC-1 PANEL


MC-1 PANEL



MC-1 PANEL

- Twelve (12) nos. 10A, SP MCB. MC-1 PANEL

MC-1 PANEL



MC-1 PANEL

- Thirty (30) nos. 20A SP MCB. MC-1 PANEL

MC-1 PANEL

- 1 Set MC-1 PANEL


MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Twenty Seven (27) nos. 10A SP MCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Seventeen (17) nos. 20A SP MCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL



LABOUR RATE


MC-1 PANEL

- Fourteen (14) nos. 20A SP MCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL

6.7.11 DB-EE-ME1.0M-E2-TR1.01 MC-1 PANEL

MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Nine (9) nos. 10A SP MCB. MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Two (2) nos. 20A TP MCB. MC-1 PANEL

MC-1 PANEL

- 1 Set MC-1 PANEL


MC-1 PANEL

Incomer: MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL



MC-1 PANEL



MC-1 PANEL



DB-EE-ME1.0M-E2-TR1.01 as described above and as per DB chart

LABOUR RATE


MC-1 PANEL



MC-1 PANEL

- Twelve (12) nos. 20A SP MCB. MC-1 PANEL

MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL


Incomer: MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL





MC-1 PANEL


MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL

6.7.14 DB-EE-ME1.20-C4-TR2.01 MC-1 PANEL

MC-1 PANEL

Incomer: MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL






MC-1 PANEL



- Fifteen (15) nos. 20A SP MCB. MC-1 PANEL







- 1 Set MC-1 PANEL


MC-1 PANEL



DB-EE-ME1.20-C4-TR2.01 as described above and as per DB chart

LABOUR RATE


Incomer: MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Nine (9) nos. 20A, SP MCB. MC-1 PANEL

MC-1 PANEL

- One (1) no. 20A, TP MCB. MC-1 PANEL

MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Incomer: MC-1 PANEL


Busbar : MC-1 PANEL


MC-1 PANEL


MC-1 PANEL



MC-1 PANEL


MC-1 PANEL




LABOUR RATE


MC-1 PANEL

- Nine (9) nos. 20A, SP MCB. MC-1 PANEL

MC-1 PANEL



MC-1 PANEL


MC-1 PANEL



MC-1 PANEL


MC-1 PANEL



MC-1 PANEL


MC-1 PANEL

- 1 Set MC-1 PANEL


MC-1 PANEL

Incomer: MC-1 PANEL

MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL


MC-1 PANEL

- Fifteen (15) nos. 20A SP MCB. MC-1 PANEL

MC-1 PANEL

- 1 Set MC-1 PANEL

MC-1 PANEL

6.7.19 DB-EE-ME1.01-F1-TR1.01 MC-1 PANEL

MC-1 PANEL



LABOUR RATE


Incomer: MC-1 PANEL


MC-1 PANEL

Busbar : MC-1 PANEL

100A 4P Cu. busbar MC-1 PANEL

MC-1 PANEL


MC-1 PANEL


- MC-1 PANEL

One (1) no. 16A, 3 Phase, RCD (100 mA). MC-1 PANEL

- MC-1 PANEL

Six (6) nos. 10A SP MCB. MC-1 PANEL

MC-1 PANEL


- MC-1 PANEL

One (1) no. 40A, 3 Phase, RCD (30 mA). MC-1 PANEL

- MC-1 PANEL

Six (6) nos. 20A SP MCB. MC-1 PANEL

- MC-1 PANEL

1 Set MC-1 PANEL

MC-1 PANEL

6.800 MC-1 PANEL

MC-1 PANEL

a) 630 Amp, 4 pole, 400V, 40 KA @ 1 Sec. 1 No. MC-1 PANEL

b) 250 Amp, 4 pole, 400V, 40 KA @ 1 Sec. 1 No. MC-1 PANEL

c) 200 Amp, 4 pole, 400V, 40 KA @ 1 Sec. ur Nos. MC-1 PANEL

d) 100 Amp, 4 pole, 400V, 40 KA @ 1 Sec. 1 No. MC-1 PANEL

e) 63 Amp, 4 pole, 400V, 40 KA @ 1 Sec. 1 No. MC-1 PANEL

f) 40 Amp, 4 pole, 400V, 40 KA @ 1 Sec. 1 No. MC-1 PANEL

g) 32 Amp, 4 pole, 400V, 40 KA @ 1 Sec. 1 No. MC-1 PANEL

MC-1 PANEL

7.00 CABLES, SUB MAINS & CABLE TRAYS : MC-1 CAB

MC-1 CAB

7.10 Cables in Under Ground Installations : MC-1 CAB

MC-1 CAB

MC-1 CAB

MC-1 CAB

DB-EE-ME1.01-F1-TR1.01 as described above and as per DB chart

Design, Manufacturing, Supply, installation, Testing and Commissioning of Auto Transfer Switch Panel (ATS Panels) of following ratings as per specifications, SLD and approved Shop drawing :-



LABOUR RATE


7.1.1 MC-1 CAB

MC-1 CAB

a) 4 core 400 Sqmm 10 RM MC-1 CAB

b) 4 core 300 Sqmm 10 RM MC-1 CAB

c) 4 core 240 Sqmm 10 RM MC-1 CAB

d) 4 core 185 sqmm 10 RM MC-1 CAB

e) 4 core 150 sqmm 100 RM MC-1 CAB

f) 4 core 120 sqmm 10 RM MC-1 CAB

g) 4 core 95 sqmm 50 RM MC-1 CAB

h) 4 core 70 sqmm 100 RM MC-1 CAB

i) 4 core 50 sqmm 100 RM MC-1 CAB

j) 4 core 35 sqmm 500 RM MC-1 CAB

k) 4 core 25 sqmm 500 RM MC-1 CAB

l) 4 core 16 sqmm 100 RM MC-1 CAB

m) 4 core 10 sqmm 10 RM MC-1 CAB

n) 4 core 6 sqmm 10 RM MC-1 CAB

o) 4 core 4 sqmm 10 RM MC-1 CAB

p) 3 core 25 sqmm 10 RM MC-1 CAB

q) 3 core 16 sqmm 10 RM MC-1 CAB

r) 3 core 10 sqmm 10 RM MC-1 CAB

s) 3 core 6 sqmm 10 RM MC-1 CAB

t) 3 core 4 sqmm 10 RM MC-1 CAB

u) 2 core 6 sqmm 10 RM MC-1 CAB

v) 2 core 4 sqmm 10 RM MC-1 CAB

MC-1 CAB

7.20 Cables on Racks / Pipes / Ducts / Wireways/Cable Trays : MC-1 CAB

MC-1 CAB

MC-1 CAB

MC-1 CAB

7.2.1 Copper Conductor Armoured Cables : MC-1 CAB

MC-1 CAB

a) 4 core 400 Sqmm 100 RM MC-1 CAB

b) 4 core 300 Sqmm 400 RM MC-1 CAB

c) 4 core 240 Sqmm 300 RM MC-1 CAB

d) 4 core 185 sqmm 150 RM MC-1 CAB

e) 4 core 150 sqmm 300 RM MC-1 CAB

f) 4 core 120 sqmm 1700 RM MC-1 CAB

g) 4 core 95 sqmm 10 RM MC-1 CAB

h) 4 core 70 sqmm 10 RM MC-1 CAB

i) 4 core 50 sqmm 1500 RM MC-1 CAB

j) 4 core 35 sqmm 200 RM MC-1 CAB

k) 4 core 25 sqmm 700 RM MC-1 CAB



LABOUR RATE


l) 4 core 16 sqmm 600 RM MC-1 CAB

m) 4 core 10 sqmm 700 RM MC-1 CAB

n) 4 core 6 sqmm 1500 RM MC-1 CAB

o) 4 core 4 sqmm 1200 RM MC-1 CAB

p) 3 core 25 sqmm 10 RM MC-1 CAB

q) 3 core 16 sqmm 10 RM MC-1 CAB

r) 3 core 10 sqmm 10 RM MC-1 CAB

s) 3 core 6 sqmm 10 RM MC-1 CAB

t) 3 core 4 sqmm 1700 RM MC-1 CAB

u) 2 core 6 sqmm 300 RM MC-1 CAB

v) 2 core 4 sqmm 10 RM MC-1 CAB

MC-1 CAB

7.2.2 Copper Conductor Armoured Control Cables : MC-1 CAB

MC-1 CAB

a) 14 C 1.5 Sqmm PVC cable 50 RM MC-1 CAB

b) 10 C 1.5 Sqmm PVC cable 50 RM MC-1 CAB

c) 9 C 1.5 Sqmm PVC cable 100 RM MC-1 CAB

d) 7 C 1.5 Sqmm PVC cable 200 RM MC-1 CAB

e) 5 C 1.5 Sqmm PVC cable 200 RM MC-1 CAB

f) 3 C 1.5 Sqmm PVC cable 200 RM MC-1 CAB

MC-1 CAB

7.30 Cable Termination : MC-1 TERM

MC-1 TERM

MC-1 TERM

MC-1 TERM

7.3.1 Copper conductor armoured cables : MC-1 TERM

MC-1 TERM

a) 4 core 400 Sqmm 2 Nos. MC-1 TERM

b) 4 core 300 Sqmm 8 Nos. MC-1 TERM

c) 4 core 240 Sqmm 4 Nos. MC-1 TERM

d) 4 core 185 sqmm 12 Nos. MC-1 TERM

e) 4 core 150 sqmm 20 Nos. MC-1 TERM

f) 4 core 120 sqmm 20 Nos. MC-1 TERM

g) 4 core 95 sqmm 2 Nos. MC-1 TERM

h) 4 core 70 sqmm 2 Nos. MC-1 TERM

i) 4 core 50 sqmm 16 Nos. MC-1 TERM

j) 4 core 35 sqmm 10 Nos. MC-1 TERM

k) 4 core 25 sqmm 42 Nos. MC-1 TERM

l) 4 core 16 sqmm 30 Nos. MC-1 TERM

m) 4 core 10 sqmm 26 Nos. MC-1 TERM

n) 4 core 6 sqmm 44 Nos. MC-1 TERM

o) 4 core 4 sqmm 100 Nos. MC-1 TERM

p) 3 core 25 sqmm 2 Nos. MC-1 TERM


LABOUR RATE


q) 3 core 16 sqmm 2 Nos. MC-1 TERM

r) 3 core 10 sqmm 2 Nos. MC-1 TERM

s) 3 core 6 sqmm 2 Nos. MC-1 TERM

t) 3 core 4 sqmm 114 Nos. MC-1 TERM

u) 2 core 6 sqmm 2 Nos. MC-1 TERM

v) 2 core 4 sqmm 2 Nos. MC-1 TERM

MC-1 TERM

7.3.2 Copper Conductor PVC Insulated Armoured Control Cables : MC-1 TERM

MC-1 TERM

MC-1 TERM

a) 14 C x 1.5 Sqmm 2 Nos. MC-1 TERM

b) 10 C x 1.5 Sqmm 2 Nos. MC-1 TERM

c) 9 C x 1.5 Sqmm 2 Nos. MC-1 TERM

d) 7 C x 1.5 Sqmm 4 Nos. MC-1 TERM

e) 5 C x 1.5 Sqmm 4 Nos. MC-1 TERM

f) 3 C x 1.5 Sqmm 2 Nos. MC-1 TERM

MC-1 TERM

Notes : MC-1 TERM

MC-1 TERM

7.40 MC-1 cab

MC-1 cab

a) 4 C x 185 Sqm, CWZ Cable 150 RM MC-1 cab

b) 4 C x 150 Sqm, CWZ Cable 10 RM MC-1 cab

c) 4 C x 120 Sqm, CWZ Cable 10 RM MC-1 cab

d) 4 C x 95 Sqm, CWZ Cable 10 RM MC-1 cab

e) 4 C x 70 Sqm, CWZ Cable 10 RM MC-1 cab

f) 4 C x 50 Sqm, CWZ Cable 10 RM MC-1 cab

g) 4 C x 35 Sqm, CWZ Cable 10 RM MC-1 cab

h) 4 C x 25 Sqm, CWZ Cable 400 RM MC-1 cab

i) 4 C x 16 Sqm, CWZ Cable 250 RM MC-1 cab

j) 4 C x 10 Sqm, CWZ Cable 200 RM MC-1 cab

k) 4 C x 6 Sqm, CWZ Cable 10 RM MC-1 cab

l) 4 C x 4 Sqm, CWZ Cable 10 RM MC-1 cab

m) 4 C x 2.5 Sqm, CWZ Cable 10 RM MC-1 cab

MC-1 cab

7.50 Cable Trays : MC-1 tray

MC-1 tray




LABOUR RATE


MC-1 tray

MC-1 tray

Notes : MC-1 tray

MC-1 tray

7.5.1 Ladder Type Cable tray : MC-1 tray

MC-1 tray

a) 900 mm x 75 mm x 2.0 mm 10 RM MC-1 tray

b) 750 mm x 75 mm x 2.0 mm 10 RM MC-1 tray

c) 600 mm x 75 mm x 2.0 mm 10 RM MC-1 tray

d) 450 mm x 75 mm x 2.0 mm 10 RM MC-1 tray

e) 300 mm x 75 mm x 2.0 mm 10 RM MC-1 tray

f) 225 mm x 75 mm x 2.0 mm 10 RM MC-1 tray

g) 100 mm x 75 mm x 2.0 mm 10 RM MC-1 tray

MC-1 tray

7.5.2 Perforated Type Cable Tray : MC-1 tray

MC-1 tray

a) 750 mm x 75 mm x 2.0 mm 10 RM MC-1 tray

b) 600 mm x 75 mm x 2.0 mm 50 RM MC-1 tray

c) 500 mm x 75 mm x 2.0 mm 300 RM MC-1 tray

d) 400 mm x 75 mm x 2.0 mm 100 RM MC-1 tray

e) 300 mm x 50 mm x 2.0 mm 300 RM MC-1 tray

f) 250 mm x 50 mm x 2.0 mm 100 RM MC-1 tray

g) 200 mm x 75 mm x 2.0 mm 200 RM MC-1 tray

h) 150 mm x 75 mm x 2.0 mm 500 RM MC-1 tray

i) 100 mm x 75 mm x 2.0 mm 150 RM MC-1 tray

MC-1 tray

7.5.3 Fibreglass Ladder Type Cable Tray : MC-1 tray

MC-1 tray

MC-1 tray

a) 600 mm wide 10 RM MC-1 tray

b) 450 mm wide 10 RM MC-1 tray

c) 300 mm wide 10 RM MC-1 tray

d) 225 mm wide 10 RM MC-1 tray

e) 100 mm wide 10 RM MC-1 tray

MC-1 tray




LABOUR RATE


7.60 Misc. Works Relating to Cabling: MC-1 pipe

MC-1 pipe

7.6.1 GI Pipe Installation : MC-1 pipe

MC-1 pipe

MC-1 pipe

MC-1 pipe

a) 25 mm dia 10 RM MC-1 pipe

b) 32 mm dia 10 RM MC-1 pipe

c) 40 mm dia 10 RM MC-1 pipe

d) 50 mm dia 10 RM MC-1 pipe

e) 80 mm dia 10 RM MC-1 pipe

f) 100 mm dia 10 RM MC-1 pipe

g) 150 mm dia 10 RM MC-1 pipe

MC-1 pipe

7.6.2 Flexible Conduits Installation : MC-1 pw

MC-1 pw

MC-1 pw

7.6.2.1 GI flexible conduits : MC-1 pw

MC-1 pw

a) 20 mm dia 200 RM MC-1 pw

b) 25 mm dia 100 RM MC-1 pw

c) 40 mm dia 100 RM MC-1 pw

d) 50 mm dia 100 RM MC-1 pw

MC-1 pw

8.00 WIRING : MC-1 pw

MC-1 pw

8.10 Point Wiring : MC-1 pw

MC-1 pw

The rates for point wiring shall include the circuit wiring. MC-1 pw

MC-1 pw

MC-1 pw

MC-1 pw

MC-1 pw

MC-1 pw






LABOUR RATE


MC-1 pw

MC-1 pw

MC-1 pw

MC-1 pw

MC-1 pw

MC-1 pw

8.1.1 Light Points controlled by switch : MC-1 pw

MC-1 pw

a) Single/ First light point con-trolled by a 5Amps switch. 52 Nos. MC-1 pw

MC-1 pw

b) Same as above but loop point 172 Nos. MC-1 pw

MC-1 pw

8.1.2 Light Points controlled directly from DB . MC-1 pw

MC-1 pw

i. Single/ First Point Controlled directly by MCB in DB 108 Nos. MC-1 pw

MC-1 pw

ii. Same as above but loop point. 699 Nos. MC-1 pw

MC-1 pw

8.1.3 Two way points : MC-1 pw

MC-1 pw

a) Light points controlled by 2 Nos 2 way switch. MC-1 pw

MC-1 pw

i) 2 Nos. MC-1 pw

MC-1 pw

ii) Same as above but loop point. 11 Nos. MC-1 pw

MC-1 pw

8.1.4 Presence Sensor : MC-1 pw

MC-1 pw

a) 25 Nos. MC-1 pw

MC-1 pw

8.1.5 6A Socket Points : MC-1 pw

MC-1 pw

The rates of point wiring shall include supply, installation, testing & commissioning of MS conduit with accessories, GI Boxes and required GI flexible conduits with accessories up to the Point, LSZH insulated, stranded, Cu. Wire, switches and sockets (as approved by Engineer-in-charge) etc. as required and as per specification and direction of Engineer-in-charge.


The rates of point wiring shall include earthing of each light, fan, switches, switch plates, boxes and other non current carrying metallic part with 2.5Sqm. Stranded copper, LSZH insulated, stranded, copper wire.


Wiring from Presence Sensor to the DB/SwitchBoard/Light fixtures, including providing Presence Sensor as required and as per approved shop drawing (wiring from DB to light points has already been included in subheads 1.1,1.2,1.3 above and not to be considered here).

LABOUR RATE


a) 40 Point MC-1 pw

8.20 Power Socket Wiring : MC-1 pw

MC-1 pw

MC-1 pw

MC-1 pw

8.2.1 11 Point MC-1 pw

MC-1 pw


MC-1 pw


MC-1 pw


MC-1 pw


Power Socket Wiring shall include supply, installation, testing and commissioning of wiring of following points, including, providing conduits of suitable size, its accessories/Hardware, Junction Boxes, LSZH wires, termination of wires, switches, socket outlets, Plug tops etc. as required, as per specification and as approved by Engineer-in-charge.



Wiring for 3 Nos. BS, 16A, switched outlet with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 3 Nos.BS outlet 16A switched with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.


LABOUR RATE



MC-1 pw


MC-1 pw


MC-1 pw


MC-1 pw


MC-1 pw



Wiring for 1 No. BS, 16A, switched outlet & 1 No. BS 16A switched outlet in IP-65 enclosure with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 16A, switched outlet & 1 No. IP-65 BS, 16A, switched outlet with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 1 No. BS, 16A, switched outlet (Spur Outlet) with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 16A, switched outlet (Spur Outlet) with internal wiring in G.I. box, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 1 No. BS, 32A, switched outlet in IP-65 enclosure for Water Heater with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. BS, 32A, switched outlet in IP-65 enclosure with internal wiring, earthing of 3rd pin with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

LABOUR RATE



MC-1 pw


MC-1 pw


MC-1 pw

8.2.13 120 Point MC-1 pw

MC-1 pw

8.30 CEE INDUSTRIAL SWITCHED SOCKETS MC-1 pw

MC-1 pw

Wiring for 1 No. Disabled Alarm Device with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 1 No. Disabled Alarm Device (As approved by the Engineer-in-charge) with internal wiring in G.I. box, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 2 Nos. Power & Data Pillar, each consisting of 2 Nos. 6A BS socket, 1 No. 15A Switch and 1 No. RJ-45 Data Outlets in IP-65 enclosure, with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 2 Nos. Power & Data Pillar, each consisting of 2 Nos. 6A BS socket with 1 No. 15A Switch and 1 No. RJ-45 Data Outlets in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required and as per approved shop drawing.

Wiring for 3 Nos. Power & Data Pillar, each consisting of 2 Nos. 6A BS socket with 1 No. 15A Switch and 1 No. RJ-45 Data outlet in IP-65 enclosure, with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 3 Nos. Power & Data Pillar, each consisting of 2 Nos. 6A BS socket with 1 No. 15A Switch and 1 No. RJ-45 Data outlet in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required.

Wiring for 4 Nos. Power & Data Pillar, each consisting of 2 Nos. 6A BS socket with 1 No. 15A Switch and 1 No. RJ-45 Data outlets in IP-65 enclosure, with 4 Sqmm LSZH insulated stranded copper conductor wires in recessed/surface black enameled MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 4 Nos. Power & Data Pillar, each consisting of 2 Nos. 6A BS socket with 1 No. 15A Switch and 1 No. RJ-45 Data outlets in IP-65 enclosure, with internal wiring, earthing with LSZH insulated, green colour 2.5 Sq.mm copper wire, complete with all accessories as required.

LABOUR RATE


8.3.1 MC-1 pw

MC-1 pw

a) 16A, 2P+E, CEE, switched socket outlet with plug top (IP-44) 47 Nos. MC-1 pw

b) 15 Nos. MC-1 pw

c) 4 Nos. MC-1 pw

MC-1 pw

8.3.2 MC-1 pw

MC-1 pw

a) 16A BS switched socket outlet. 12 Nos. MC-1 pw

MC-1 pw

b) 15 Nos. MC-1 pw

MC-1 pw

8.3.3 MC-1 pw

MC-1 pw

- MC-1 pw

MC-1 pw

- MC-1 pw

MC-1 pw

- 7 Nos. MC-1 pw

MC-1 pw

8.40 ISOLATORS MC-1 pw

MC-1 db

MC-1 db

MC-1 db

a) 16A Four pole isolator 7 Nos. MC-1 db

MC-1 db

b) 32A Four pole isolator 6 Nos. MC-1 db

MC-1 db

c) 63A Four pole isolator 2 Nos. MC-1 db




Supply, installation, testing and commissioning of following BS switched socket outlets including termination, earthing etc. in surface/recessed mounting as required. (Cabling/conduiting & wiring shall be paid seperately under different item).

16A weatherproof BS switched socket outlet in IP-65 enclosure.

Supply, installation, testing and commissioning of following Single Phase/3 phase, CEE, switched, Industrial type Plug and socket Combination Outlet in single enclosure (IP-65) consisting of including termination, Earthing etc. in surface/recess mounting as required. (Conduiting/wiring/cabling for the same shall be paid seperately under different item).

16A, 3P+N+E, CEE, switched socket outlets with plug (IP-44) with 16A TPN MCB,10kA.




LABOUR RATE


MC-1 db

d) 100A Four pole isolator 2 Nos. MC-1 db

MC-1 db

e) 200A Four pole isolator 1 No. MC-1 db

MC-1 db

f) 250A Four pole isolator 2 Nos. MC-1 db

MC-1 db

8.50 M.S. Black Conduits : MC-1 pw

MC-1 pw

. MC-1 pw

MC-1 pw

a) 20 mm dia 20 RM MC-1 pw

b) 25 mm dia 20 RM MC-1 pw

c) 32 mm dia 20 RM MC-1 pw

d) 40 mm dia 20 RM MC-1 pw

e) 50 mm dia 20 RM MC-1 pw

8.60 Sub-mains Wiring : MC-1 pw

MC-1 pw

MC-1 pw

MC-1 pw

a) 2 x 1.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM MC-1 pw

b) 2 x 2.5 Sqmm + 1 No. 1.5 Sqmm Copper earth wire 20 RM MC-1 pw

c) 2 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire. 20 RM MC-1 pw

d) 2 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM MC-1 pw

e) 4 x 4.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM MC-1 pw

f) 4 x 6.0 Sqmm + 1 No. 2.5 Sqmm Copper earth wire 20 RM MC-1 pw

g) 2 x 10.0 Sqmm + 1 No. 6.0 Sqmm Copper earth wire 20 RM MC-1 pw

h) 4 x 10.0 Sqmm + 2 Nos. 6.0 Sqmm Copper earth wire 20 RM MC-1 pw

i) 4 x 16.0 Sqmm + 2 Nos. 10.0 Sqmm Copper earth wire 20 RM MC-1 pw

j) 4 x 25.0 Sqmm + 2 Nos. 16.0 Sqmm Copper earth wire 20 RM MC-1 pw

MC-1 pw

Note: MC-1 pw

MC-1 pw

1) MC-1 pw

MC-1 pw

2) MC-1 pw

MC-1 pw

TOTAL OF WIRING CARRIED OVER TO SUMMARY MC-1 pw

9.00 LIGHTING FIXTURES : MC-1 light





LABOUR RATE


MC-1 light

MC-1 light

MC-1 light

i) 21 Nos. MC-1 light

MC-1 light

ii) 7 Nos. MC-1 light

MC-1 light

iii) 3 Nos. MC-1 light

MC-1 light

iv) 303 Nos. MC-1 light

MC-1 light

v) 84 Nos. MC-1 light

MC-1 light

vi) 45 Nos. MC-1 light

MC-1 light

vii) 22 Nos. MC-1 light

MC-1 light

viii) 7 Nos. MC-1 light

MC-1 light

ix) 162 Nos. MC-1 light

MC-1 light

x) 34 Nos. MC-1 light

MC-1 light

xi) 13 Nos. MC-1 light

MC-1 light


Pole Light with 70W Lamp, Pole Height 4.2 m (SIMES Minislot Disk S.3982 with S.2846 Pole or Equivalent) (F11)

Surfaced Downlight 1 x 26 W (Thorn Chalice C 190H 1 X 26 W or Equivalent) (T12)

Surfaced Downlight 1 x 26 W (Thorn Chalice C 190H 1 X 26 W or Equivalent) (T2) complete with Emergency Lighting Units.

Recessed Downlight 1 x 26W (Thorn Chalice C 190H 1 x 26W or Equivalent) (T13)

Recessed Downlight 1 x 26W (Thorn Chalice C 190H 1 x 26W or Equivalent) (T13) complete with Emergency Lighting Units.

Wall mounted Luminaire with 1 x 28W Fluorescent T5 Lamp water proof IP44 (SITECO Europlex 24W IP44 or Equivalent) (T8)


Recessed Quad 2 x 18W (Thorn Matrix 300 2 x 18W or Equivalent) (T15) complete with Emergency Lighting Units.


Recessed Luminaire with 4 x 18W T5 Lamps with Parabolic Louvre (Thorn Omega BS/SB 4 x 18W or Equivalent) (T14) complete with Emergency Lighting Units.


LABOUR RATE


xii) 5 Nos. MC-1 light

MC-1 light

xiii) 8 Nos. MC-1 light

MC-1 light

xiv) 5 Nos. MC-1 light

MC-1 light

xv) 156 Nos. MC-1 light

MC-1 light

xvi) 29 Nos. MC-1 light

MC-1 light

xvii) 10 Nos. MC-1 light

MC-1 light

xviii) 4 Nos. MC-1 light

MC-1 light

xix) 40 Nos. MC-1 light

MC-1 light

xx) 4 Nos. MC-1 light

MC-1 light

xxi) 75 Nos. MC-1 light

MC-1 light

xxii) 32 Nos. MC-1 light

MC-1 light

xxiii) 9 Nos. MC-1 light

MC-1 light

xxiv) 11 Nos. MC-1 light

MC-1 light

xxv) 1 No. MC-1 light

MC-1 light

Recessed Luminaire 2 x 58W IP65 (Thorn Duopre 2 x 58W T26 H2F or Equivalent) (T23) complete with Emergency Lighting Units.


Recessed outside Downlight IP54 (Trilux Downlight IP54 or Equivalent) (T21) complete with Emergency Lighting Units.

Step Light recessed in stairs with 11W LED Lamp diffusers with pressure formed glass IP64 (Bega Step Light TC-S 2191 or Iguzzini Step Light Vision SP50 or Equivalent) (T26).

Wall mounted Luminaire with 2 x 35W Fluorescent T5 Lamps with Prismatic Diffuser (Thorn Prisma C 2 x 35 T16CL or Equivalent) (T19)

Wall mounted Luminaire with 2 x 35W Fluorescent T5 Lamps with Prismatic Diffuser (Thorn Prisma C 2 x 35 T16CL or Equivalent) (T19) complete with Emergency Lighting Units.

Recessed Outside Downlight IP44 (Thorn Chalice C 190H 1 x 26W IP44) (T22)

Bulk Head Light Wall Mounted with 2 x 28W TC-DEL Lamp IP-65 (Thorn Dunube 1 x 28W IP65 or Equivalent) (T11)

Bulk Head Light Wall Mounted with 2 x 28W TC-DEL Lamp IP-65 (Thorn Dunube 1 x 28W IP65 or Equivalent) (T11) complete with Emergency Lighting Units.

Surface mounted Industrial Luminaire with 2 x 36W Fluorescent T5 Lamps (Thorn Indus RD 2 x 58W TW or Equivalent) (T6)

Surface mounted Industrial Luminaire with 2 x 36W Fluorescent T5 Lamps (Thorn Indus RD 2 x 58W TW or Equivalent) (T6) complete with Emergency Lighting Units.

Emergency Exit Up Fixture complete with Emergency Lighting Unit (Cooper/Crompton or Approved Equivalent).

Emergency Exit Down Fixture complete with Emergency Lighting Unit (Cooper/Crompton or Approved Equivalent).

Emergency Exit Right Fixture complete with Emergency Lighting Units (Cooper/Crompton or Approved Equivalent).

LABOUR RATE


MC-1 light

10.00 EARTHING & LIGHTNING PROTECTION SYSTEM : MC-1 earth

MC-1 earth

10.10 Earthing System: MC-1 earth

MC-1 earth

10.1.1 14 Nos. MC-1 earth

MC-1 earth


MC-1 earth


MC-1 earth

10.1.4 Earthing Strip/Tape/Cables : MC-1 earth

MC-1 earth

MC-1 earth

MC-1 earth

G.I. Earthing strip/tape : MC-1 earth

MC-1 earth

a 50 x 8 mm strip 10 RM MC-1 earth

b 50 x 6 mm strip 10 RM MC-1 earth

c 40 x 6 mm strip 10 RM MC-1 earth






10.1.4.1

LABOUR RATE


d 32 x 6 mm strip 10 RM MC-1 earth

e 25 x 6 mm strip 10 RM MC-1 earth

f 25 x 3 mm strip 10 RM MC-1 earth

MC-1 earth

Tinned Copper earthing strip/tape : MC-1 earth

MC-1 earth

a) 50 x 6 mm 100 RM MC-1 earth

b) 32 x 6 mm 50 RM MC-1 earth

c) 25 x 6 mm 10 RM MC-1 earth

d) 25 x 3 mm 2100 RM MC-1 earth

10.1.5 MC-1 cab

MC-1 cab

a) 1C x 185 Sqm 400 RM MC-1 cab

MC-1 cab

b) 1C x 90 Sqm 10 RM MC-1 cab

MC-1 cab

c) 1C x 50 Sqm 10 RM MC-1 cab

MC-1 cab

d) 1C x 35 Sqm 10 RM MC-1 cab

MC-1 cab

e) 1C x 25 Sqm 10 RM MC-1 cab

MC-1 cab

10.1.6 MC-1 earth

MC-1 earth

75 x 6 mm tinned, Copper, Earth Bars. MC-1 earth

MC-1 earth

a) 300 mm 1 No. MC-1 earth

b) 500 mm 2 Nos. MC-1 earth

c) 750 mm 3 Nos. MC-1 earth

d) 1000 mm 1 No. MC-1 earth

MC-1 earth

50 x 6 mm tinned, Copper, Earth Bars. MC-1 earth

MC-1 earth

a) 300 mm 5 Nos. MC-1 earth



d) 1000 mm 5 Nos. MC-1 earth

MC-1 earth

10.20 Lightning Protection System: MC-1 earth

10.1.4.2


Supply, installation, Termination, testing and Commissioning of following sizes Tinned Copper Earth Bars including its supporting/fixing hardware, as per drawings, specifications and as directed by Engineer-in-charge.

10.1.6.1

10.1.6.2

LABOUR RATE


MC-1 earth


MC-1 earth


MC-1 earth

10.2.3 Earthing Strip/Wires : MC-1 earth

MC-1 earth

MC-1 earth

MC-1 earth

a) 25 x 3 mm strip 500 RM MC-1 earth

MC-1 earth

b) 25 x 6 mm strip 200 RM MC-1 earth

MC-1 earth

c) 32 x 6 mm strip 10 RM MC-1 earth

MC-1 earth

10.2.4 MC-1 earth

MC-1 earth

75 x 6 mm GI Earth Bars. MC-1 earth

MC-1 earth









10.2.4.1

LABOUR RATE


MC-1 earth

50 x 6 mm GI Earth Bars. MC-1 earth

MC-1 earth





MC-1 earth


MC-1 earth


MC-1 earth

MC-1 earth

MC-1 earth

GRAND TOTAL

10.2.4.2




voltas jpsk

Documents