VOLVO S60 XC60 Video Interface 

                                                  For VOLVO S60 XC60 5inch monitor Main Features: 1. It is suitable for VOLVO 2011 up version 5 inch monitor                                                     2. With 2AV input, RGBS input, Rear camera input, LVDS input                                             3. With    1AV output, LVDS output SYNCH                                                   4. Built‐in CANBUS by original button NAV to Switch functions.                                            

Auto Rear camera Activation completely when gear is in reverse position, no                         need to connect rear light +12V                                                   

5. With touch operation system for external DVD, DVB T, GPS NAVI. you can by touch screen to control DVD, DVB T, GPSBOX after by learing IR code command,    this is excellent for add after‐market video unit.                                                   

6. With completely plug and play to finish the installation, no need to cut, and weld any cable to finish the installation                                                                                                                       

7. If you do not want to add the external touch screen in front of the original monitor, you can also use the original button on Radio to control the DVD, DVB T, or GPS by learing remote IR command code.                                                                                       

8. Built‐in GPS function (Optional) 9. Switch by original NAV button or by Toggle switcher. 10.  

       VOLVO S60 XC60 Video Interface                                    VOLVO S60 XC60 Video GPS Interface           

Connection: The Left Picture is car original CAN and Power cable Identify: 1. Blue/Orange cable: CAN- 2. White/Orange cable: CAN+ 3. Black cable: Ground 4. RED Cable: BATT

After finish installation, please to press the original button: and to Touch ICON LOGO when press or after control the touch Functions according to the montor touch ICON LOGO after Learning IR Code Command. by learnging the touch IR Code Command for after-market DVD, DVBT, TV, etc.

The functions switch: you can press the toggle switcher And also you can press the original button NAV to switch: To switch the fucnction. Radio RGB AV1 AV2 Radio RGB AV1 AV2 Radio RGB Radio RGBS

Touch Cable: FPC connector to touch panel, the other side to video interface Touch slot, as the abovr picture

If video interface without built-in GPS, then need to connect 4PINS to external GPSBOX Touch connector, 6PINS need to Connect GPSBOX RGBS output connector. But if Video Interface Built-in GPS, then both of these two connectot left empty, you can only connect one Touch cable with video interface, and touch panel is ok as the former picture show. Packing List: Daughter Board Power can CAN Cable Toggle Switcher RGB, AV, Touch cable Touch cable Speaker & GPS Antenna (only for built -in GPS Video Interface)

At present, BMW CIC, VOLVO, BENZ 2011 NTG4.5, AUDI 3G MMI, Benz S class, Ford viode interface, etc youcan only directly to connect this RGBS cable to be as the above instruction, then can realize external DVD, DVB T , GPS BOX by touch operation after by learning IR touch Code Command!

DVD, DVB T IR cable shielding case connecto to be Ground after cut the IR header.

IR cable connection:

Please look at the above picture, IR cable is for external DVD, DVB T IR cable input connection. In common, you need to cut the DVD, and DVB T IR remote cable IR receiver head, then you can

see there are three parts in this DVD IR cable: two small cable, and one is the shielding case.

Among the two small cable, the cable connecting to the first leg of IR head receiver is the IR signal transmittion, the other small cable is useless, so you only need to connect the IR transmitton

cable the video interface IR output cable together is ok. Please look at the right picture, the RED CIRCLE marked is the Fisrt Leg of IR header, to connect the DVD, or DVB T IR cable, and the Then to finish the video interface and external DVD, DVB T IR cable connection.

To set the video interface switcher 6th PIN to down for ready IR code learing as the picture:

Then the original screen will show the touch ICON for ready learning IR CODE COMMOND as the below picture:

Finally, to make the DVD, or DVB T remote contorller point at the video interface IR eye as the below picture show ( the IR eye is inside the video interface) to start the IR command learning

According to the monitor touch ICON LOGO to press the remote controller button

correspondly, you must do not exit this learning situation unit to finish the

all touch ICON IR command learning, otherwise, the learning will be failed. after finish

all the touch ICON learning then to pull up and down video interface switch 6th PINS

5-6 times to calibration, until the monitor appear the Cross LOGO, then stop to pull the

DIP6, and start to touch the CROSS LOGO to calibration touch functions. See the below

Pictures:

After calibration, you can touch the monitor

to operate the DVD, or DVB T by these touch ICON

Navigation System

Navigation

Refer to the manual of the third party navigation software for details.

Multimedia

Movie Player Click the “Movie” icon:

Operation Introductions:

2

Navigation System

Music Player Click the “Music” icon:

Operation Introductions:

3

Navigation System

Photo Brower Click the “Photo” icon:

Operation Introductions:

4

Navigation System

eBook Reader Click the “eBook” icon:

Operation Introductions:

5

Navigation System

Setup Submenu

Setup Submenu:

6

Navigation System

GPS Set Setup the path of the third party navigation software which is resident in the SD Card. After finish it, return to Main Menu, click the “Navi” icon, then the third party navigation software will be started.

If you hope that the third party navigation software will run immediately after system started, please check in the box.

Brightness

Click the “Brightness” icon:

7

Navigation System

Volume

Click the “Volume” icon:

Calibration

Click the “Calibration” icon:

8

Navigation System

Click the “Yes” button:

Usually

Click the “Usually” icon:

Screen Position Adjust

Click the “ScreenAdj” icon:

9

Navigation System

GPS Signal Monitor

Click the “G-Monitor” icon:

10

Navigation System

11

System Information

Click the “System” icon:

ISDBT Touch Operation when connect to our video interface:

When Switch to ISDVB T will show the Above MENU Then touch the monitor will show these Touch ICON

Then you can Operate the DVB T by these Touc ICON MENU selection and settings The relevant Ir touch Commad in our video interface for ISDB T as below list: 1 2 3 4 5 6 7 Logo

Functions TURN ON/OFF

Play /Pause Stop MENU MUTE Search EMPTY

LOGO

Functions Back to car

Radio CH + CH-

Volume- Volume+ Confirm

selection Return

____________________________________________________________________________________________4

1 Introduction

1.1 Features ■ DIP type of ISDB-T module ■ Frequency Range[Brazil：470~806MHz] [Japan：470MHz ~ 770MHz ] ■Size : 40(W) x 38(L) x 5.0(T) mm ■Analog AV output ■ UART / IR Remote Control Interface ■ Full Compliance with ISDB-T Standards ■ Lower Power consumption ■ High Sensitivity ■Voltage input：+ 3.3V,+1.8V

1.2 Applications

■ Personal Navigation Devices(NAVI/GPS) ■ Mobile TV, Car TV ■ PMP, PDA, MP3/4P ■ STB, Home TV Box ■ Portable and Handheld Devices with ISDB-T

1.3 Block Diagram

1.8V, 3.3V

RF

Full module Block Diagram

ISDBT NIM

Power Supply

Application

Processor

Flash MEM

DAC

SPI

I2C BUS

CCIR656

CVBS

I2S out

2CH Stereo out

IR/UART

____________________________________________________________________________________________7

2.2.2 : CON1,CON2: 1.27mm single socket(20pin)

Terminal No.

Terminal Name

Terminal Descriptions

1 +3.3VA +3.3V Power

2 +3.3VA +3.3V Power

3 GND Ground

4 +1.8VA +1.8V Power LDO POWER

5 +1.8VA +1.8V Power LDO POWER

6 GND Ground

7 E_RESETB External Reset

8 IR_IN Remoter Control Input

9 GND Ground

10 AOUT_R Analog Audio Right Out

11 AOUT_L Analog Audio Left Out

12 GND Ground

13 SCLK I2S

14 LRCK I2S

15 MCLK I2S

16 SDATA I2S

17 GND Ground

18 UART_RX Universal Asynchronous Receiver 19 UART_TX Universal Asynchronous Transmitter

Con1

20 GND Ground

1 GND Ground

2 CVBS_OUT Analog Video Out

3 GND Ground

4 I2C0_SDA Reserve

5 I2C0_SCL Reserve

6 GND Ground

7 NC 8 NC 9 GND Ground

10 V_CLK CCIR 656/601

11 GND Ground

12 YC656_0 CCIR 656/601

13 YC656_1 CCIR 656/601

14 YC656_2 CCIR 656/601

15 YC656_3 CCIR 656/601

16 YC656_4 CCIR 656/601

17 YC656_5 CCIR 656/601

18 YC656_6 CCIR 656/601

19 YC656_7 CCIR 656/601

Con2

20 GND Ground