vw rabbit gti badge i-sheet 10-04-18 2…vw rabbit gti badge i-sheet 10-04-18 2 author: mschulzke...

2
+86˚F +59˚F R135 246 We recommend that fitting is carried out by a specialist workshop. • Contact your nearest Volkswagen dealer for assistance or questions about this accessory. • Conditions to avoid: heat, flame, ignition sources and incompatibles. Then clean the area with isopropyl alcohol product with between 70% and 99% alcohol mixed with distilled water and a clean household microfiber cloth Remove the back tape of the Rabbit badge, cut the full scale template on page 2, use it to place the badge on the proper liftgate location Please read badge fitting and household chemical instructions thoroughly and wear appropriate protective gear before commencing installation. The vehicle must be parked on a level surface Non-enclosed area Ambient temperatures (59˚F – 86˚F). Automatic Transmission in Park Manual Transmission in 1st gear if facing uphill, with parking brake applied Manual Transmission in reverse if facing downhill, with parking brake applied Ensure the engine is OFF and keys out of the vehicle. 1 2 3 4 5 6 7 8 Someone working on the lower liftgate area of a vehicle where these conditions are not met raises potential safety concerns which could include but not be limited to vehicle rollback or exhaust gas inhalation (if the engine were left running). P R N D S R135 246 R Pre-clean the area with soap & water and a clean household microfiber cloth Let dry and wait at least 48 hours before washing the car. 2019 GTI Rabbit Edition Badge Installation Instructions Distributed by Volkswagen of America, Inc. Auburn Hills, MI 48326 Let dry for 5 min. 62 113 48 h © 2018 Chamberlain Marketing Group All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Chamberlain Marketing Group, its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Rev. Summer 2016

Upload: others

Post on 29-Sep-2020

20 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: VW Rabbit GTI Badge I-Sheet 10-04-18 2…VW Rabbit GTI Badge I-Sheet 10-04-18 2 Author: MSchulzke Created Date: 10/15/2018 11:22:01 AM

+86˚F

+59˚F

R 1 3 5

2 4 6

• We recommend that fitting is carried out by a specialist workshop.

• Contact your nearest Volkswagen dealer for assistance or questions about this accessory.

• Conditions to avoid: heat, flame, ignition sources and incompatibles.

Then clean the area with isopropyl alcohol product with between 70% and 99% alcohol mixed with distilled water and a clean household microfiber cloth

Remove the back tape of the Rabbit badge, cut the full scale template on page 2, use it to place the badge on the proper liftgate location

Please read badge fitting and household chemical instructions thoroughly and wear appropriate protective gear before commencing installation.

The vehicle must be parked on a level surface

Non-enclosed area

Ambient temperatures (59˚F – 86˚F).

Automatic Transmission in Park

Manual Transmission in 1st gear if facing uphill, with parking brake applied

Manual Transmission in reverse if facing downhill, with parking brake applied

Ensure the engine is OFF

and keys out of the vehicle.

1 2

3 4 5

6 7 8

Someone working on the lower liftgate area of a vehicle where these conditions are not met raises potential safety concerns which could include but not be limited to vehicle rollback or exhaust gas inhalation (if the engine were left running).

P

RNDS

R 1 3 5

2 4 6

R Pre-clean the area with soap & water and a clean household microfiber cloth

Let dry and wait at least 48 hours before washing the car.

2019 GTI Rabbit Edition BadgeInstallation InstructionsDistributed by Volkswagen of America, Inc.Auburn Hills, MI 48326

Let dry for 5 min.

62

113

48 h

© 2018 Chamberlain Marketing Group

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Chamberlain Marketing Group, its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Rev. Summer 2016

lindstj
Text Box
GLOBAL COMMENT: Ensure all details are complete and accurate.
Page 2: VW Rabbit GTI Badge I-Sheet 10-04-18 2…VW Rabbit GTI Badge I-Sheet 10-04-18 2 Author: MSchulzke Created Date: 10/15/2018 11:22:01 AM