vx series diesel and lp gas forklift trucks · kubota, lpg productivity 4 cylinder overhead valve...

VX series

2,000kg / 2,500kg / 3,000kg / 3,500kg• New high Visibility Masts and optional Side Shifting Fork Positioner• IntellixTM Vehicle Management System with CANbus technology• 3 application matched transmissions, including the World’s best hydrodynamic transmission - the Yale TechtronixTM

• Oil immersed brakes• ADS - Auto Deceleration System and Anti Roll Back on TechtronixTM 100 transmission• Anti Roll Back• CANbus technology• AccuTouchTM minilevers and manual levers• Superelastic and pneumatic radial tyres

Diesel and LP Gas Forklift Trucks

Truck Dimensions

4.1

4.32m2

4.35

Wa

1.8x

1.9y

4.20l2

4.19

4.12

l1

h7

h10

4.8

h6 4.7

βα

b1

4.33/4.34Ast

Ast =Wa + R + a =Wa + √((l6 + x)² + (b12/2-b13)² ) + a

a2 100mm a

2100mm

b12

4.5h4

4.4h3

4.3h2

4.22s 4.22l

4.2h1

1.6c

Q

4.31m1

4.1

1.8x

l2 4.20 l6

b13 4.36

4.21

VX series2

● Powertrain protection system● Premium monitoring package● High air intake with pre-cleaner● Accumulator● Keyless start (with auxiliary key switch)● Traction speed limiter● Heavy-duty “Combi Cooler” radiator● Swing-out, drop-down EZ-Tank bracket● Return-to-set tilt● Swivel full suspension seat● Foot directional control● Operator password● Alarm-reverse● Amber strobe light - continuous activated● Impact monitor● Load weight indicator

Air filtration Two stage, dry typeVDI 2198 3.3LIDI fuel injection systemMazda FE, LPGBase, Value4 Cylinder Overhead CamshaftDisplacement 2.2 litreTorque 146 Nm @ 1,800rpmPower 38.0 kW @ 2,700rpmAir filtration Two stage, dry typeVDI 2198 2.7LEmission Control Closed loopKubota, LPGProductivity4 Cylinder Overhead ValveDisplacement 2.5 litreTorque 171 Nm @ 1,800rpmPower 43.9 kW @ 2,500rpmAir filtration Two stage, dry typeVDI 2198 2.80LEmission Control Closed loop

Yanmar TNE series, DieselBase, Value4 Cylinder Overhead valveDisplacement 2.6 litreTorque 138 Nm @ 1,500rpmPower 33.9 kW @ 2,700rpmAir filtration Two stage, dry typeVDI 2198 3.0LIDI fuel injection systemYanmar TNE series, DieselValue, Productivity4 Cylinder Overhead valveDisplacement 3.0 litreTorque 162 Nm @ 1,500rpmPower 34.2 kW @ 2,400rpmVDI 2198 3.1LAir filtration Two stage, dry typeIDI fuel injection systemYanmar TNE series, DieselBase, Value4 Cylinder Overhead valveDisplacement 3.3 litreTorque 203 Nm @ 1,650rpmPower 43.0 kW @ 2,400rpm

Engine Specifications Options

A full range of Yale 2-stage LFL and 2-stage and 3-stageFFL masts are available.The new Yale masts are designed for maximum visibility,with widely spaced channels, lift chains and main liftcylinders.

Masts

ModelTyre size, front Overall width, front

GLP/GDP 20 VX7.00 x 121157mm

GLP/GDP 25 VX7.00 x 121157mm

Mast

2 StageLFL

2 Stage FFL

3 StageFFL

217024202770302021701970217024202620

h1(mm)

h2+s(mm)

14014014014015581382158218322030

329037904330483033004350495055506000

390444044944544439144938553861386588

h4(mm)

F B 500 600 700666666666

555555555

ISS & FPForks

Load Centre (kg)Tilth3+s

(mm)

GDP/GLP 20VX, GDP/GLP 25VX mast details and capacity ratings (kg) - superelastic tyres

* With wide tread drive tyres (1317mm width) or dual drive tyres (1601mm width) - must be specified. h2 and h4 are without load backrest.

200020002000191020002000189017601660

192019101890180019201880176016301530

175017401730164017501720161014901400

500 600 700Load Centre (kg)

200020001990189020001970185017201600

184018301810172018401790168015601460

168016801660158016901640154014301340

500 600 700

ISS & FPForks

Load Centre (kg)

25002500250024002500250023702240*2120*

23702360235023402380238022502110*1990*

21702160215020402170217020601930*1800*


25002500248023702500250023702220*2090*

22802270225021502280228021602020*1900*

20902080207019602090209019801850*1740*

GLP/GDP 20 VX7.00 x R121157mm

GLP/GDP 25 VX7.00 x R121157mm

217024202770302021701970217024202620

14014014014015581382158218322030

329037904330483033004350495055506000

390444044944544439144938553861386588

F B 500 600 700666666666

555555555

ISS & FPForks

Load Centre (kg)Tilt

GDP/GLP 20VX, GDP/GLP 25VX mast details and capacity ratings (kg) - radial tyres

* With wide tread drive tyres (1317mm width) or dual drive tyres (1601mm width) - must be specified. **Dual drive tyres (1601mm width) must be specified.h2 and h4 are without load backrest.

20002000200019002000200018801760*1650*

19201910189017901920188017601630*1520*

17501740173016301750172016101490*1380*


20002000199018902000197018501710*1600*

18401830181017201840179016801560*1450*

16801680166015701690164015401430*1330*

500 600 700

ISS & FPForks

Load Centre (kg)

2500250025002390*25002500*2370*2240**2130**

2370236023502340*23802380*2250*2110**1990**

2170216021502040*21702170*2060*1930**1810**


2500250024802360*25002500*2370*2220**2100**

2280227022502150*22802280*2150*2020**2100**

2090208020701960*20902090*1980*

1860**1740**

GLP/GDP 30 VX225 / 75R15

1186mm

GLP/GDP 35 VX225 / 75R15

1186mm

2195244527953045219519952195234524452695

150150150150

149513191519166917692015

3105360541054605311040154615491552155815

3809430948095309381046945294559458946494

F B 500 600 7006666666666

5555555555

Integral SideshiftForks


GDP/GLP 30VX, GDP/GLP 35VX mast details and capacity ratings (kg) - radial tyres

* With wide tread drive tyres (1321mm width) or dual drive tyres (1601mm width) - must be specified. **Dual drive tyres (1601mm width) must be specified.h2 and h4 without load backrest.

Note: To calculate truck capacities with alternative truck specifications to the ones shown in the above tables, please use the YCPG software

3000300030002890300030002900*2830*2760*2610**

2820281027902690282028002700*2630*2550*2400**

2580257025602450258025602470*2400*2340*2190**


2970295029402820296029302830*2750*2680*2510**

2700269026702570270026702580*2510*2440*2290**

2480247024502350248024502370*2300*2240*

2090**

500 600 700

Integral SideshiftForks

Load Centre (kg)

350035003500334035003500*3400*3330**3250**3080**

331033003290317033103290*3190*3110**3040**2860**

303030203010290030303010*2920*2850**2780**2610**


3490348034603340349034303350*3270**3190**3000**

3180317031503040318031503050*2980**2900**2740**

2920291028902780292028902800*

2730**2670**2500**

3

GLP/GDP 30 VX28 x 9-151186mm

GLP/GDP 35 VX28 x 9-151186mm

2195244527953045219519952195234524452695

150150150150149513191519166917692015

3105360541054605311040154615491552155815

3809430948095309381046945294559458946494

F B 500 600 7006666666666

5555555555

ISS & FPForks


GDP/GLP 30VX, GDP/GLP 35VX mast details and capacity ratings (kg) - superelastic tyres

* With wide tread drive tyres (1321mm width) or dual drive tyres (1601mm width) - must be specified. h2 and h4 without load backrest.

3000300030002890300030002900284027402610*

2820281027902690282028002700263025602400*

2580257025602450258025602470241023402200*


2970295029402830296029302830276026802510*

2700269026702570270026702580251024402290*

2480247024502350248024502370231022402100*

500 600 700

ISS & FPForks

Load Centre (kg)

35003500350033903500350034003320*3250*2950*

33103300329031703310329031903110*3030*2860*

30303020301029003030301029202850*2780*2610*


349034803460334034903460335032603180*2970*

318031703150304031803150305029802900*2730*

292029102890278029202890280027302660*2500*


Mast

2 StageLFL

2 Stage FFL

3 StageFFL

h1(mm)

h2+s(mm)

h4(mm)

h3+s(mm)


Mast

2 StageLFL

2 Stage FFL

3 StageFFL

h1(mm)

h2+s(mm)

h4(mm)

h3+s(mm)


Mast

2 StageLFL

2 Stage FFL

3 StageFFL

h1(mm)

h2+s(mm)

h4(mm)

h3+s(mm)

VX series4

VDI 2198 - General Specifications, Diesel powered GDP 20VX, GDP 25VX

★ Measured according to the test cycles and based on the weighting values contained in EN12053.

↕ Variable.▲ Top of forks.

✘ Full suspension seat in depressed position.◗ Add 32mm with load backrest.❍ h6 subject to +/- 5mm tolerance. GDP20-25VX

add 25mm when front tyre size 28 x 9-15 is selected.

■ Standard / Wide / Dual. When wet axle selected values are (1186 / 1321 / 1601) for all capacities.

✚ Without load backrest.* at 1.6 km/h.

** at 4.8 km/h.❉ with Load Sensing Hydraulics (LSH).

Dis

tingu

ishi

ng m

ark

Wei

ghts

Ty

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a Co

mbu

stion

-eng

ineA

dditi

on d

ata

Yale

GDP 20 VX

Value

Yanmar 2.6L / Techtronix 100 1-Speed

Drum or Wet brakesDieselSeated2.0500471162336235046 / 5771850 / 1773SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 X 100 X 1000II A1067107160382040202149629198770238216.9 / 18.016.9 / 18.00.62/0.650.58 / 0.5017440 / 1157021.3 / 34.25.5 / 4.9HydraulicYanmar 4TNE9233.927004 / 26592.7 Hydrodynamic0 - 1557545.852.879 102Pin

Productivity

Yanmar 3.0L / Techtronix 100X 2-Speed

Wet brakesDieselSeated2.0500471162336235046 / 5771850 / 1773SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 X 100 X 1000II A1067107160382040202149629198770238219.1 / 19.814.7 / 15.20.61 / 0.640.58 / 0.5021900 / 1145025.5 / 32.75.4 / 4.8HydraulicYanmar 4TNE94L34.224504 / 30542.9 Hydrodynamic0 - 1557545.852.879 102Pin

Base

Yanmar 2.6L / StandardElectronic 1-Speed

Drum brakesDieselSeated2.0500471162336235046 / 5771850 / 1773SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 X 100 X 1000II A1067107160382040202149629198770238216.9 / 18.016.9 / 18.00.66 / 0.710.58 / 0.5017440 / 1157021.3 / 34.25.5 / 4.9HydraulicYanmar 4TNE9233.927004 / 26592.7 Hydrodynamic0 - 1557545.852.879 102Pin

Q (t)c (mm)x (mm)y (mm)kgkgkg

b10 (mm)b11 (mm)α / β (o)h1 (mm)h2 (mm)h3 (mm)h4 (mm)h6 (mm)mmh7 (mm)h10 (mm)l1 (mm)l2 (mm)b1/b2 (mm)s/e/l (mm)

b3 (mm)m1 (mm)m2 (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)(mm)(mm)(mm)km/hkm/hm/sm/sN%s

kWmin-1(-)/cm3 l/h or kg/h

barl/minlitreslitresdB (A)dB (A)

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.7.1

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.2

10.8

Manufacturer (abbreviation)Manufacturer’s type designationModel

Engine / transmission

Brake typeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, order-pickerRated capacity/rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weightAxle loading, laden front/rear Axle loading, unladen front/rear Tyres: P = pneumatic, V = cushion, SE = superelastic Tyre size, frontTyre size, rearWheels, number front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carriage forward/backward Height of mast, loweredFree lift ▲Lift ▲Height, mast extended ✚Height of overhead guard (cabin) ❍Cab height (open cab)Seat height relating to SIP/stand height ✘Coupling heightOverall length Length to face of forks Overall width ■Fork dimensions DIN ISO 2331Fork carriage ISO 2328, class/type A, BFork carriage width ◗Ground clearance, laden, below mastGround clearance, centre of wheelbaseAisle width for pallets 1000 long x 1200 crossways Aisle width for pallets 800 wide x 1200 lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed, laden/unladen Travel speed, laden/unladen, backwardsLift speed, laden/unladenLowering speed, laden/unladenDrawbar pull, laden/unladen *Gradeability, laden/unladen **Acceleration time, laden/unladen Service brakeEngine manufacturer/typeEngine power according to ISO 1585Rated speedNumber of cylinders/displacementFuel consumtion according to VDI cycle ❉Type of drive unitOperating pressure for attachmentsOil volume for attachments ↕Hydraulic tank, capacityFuel tank, capacitySound pressure level at the driver’s seat ★Guaranteed sound power 2001/14/ECTowing coupling, type DIN

5

Dis

tingu

ishi

ng m

ark

Wei

ghts

Ty

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a Co

mbu

stion

-eng

ineA

dditi

on d

ata

Base specification sheet truck based on:3290mm (GDP20/25VX) Top of Forks 2-stage LFLStandard carriage, 1000mm forks and manuallevers.

Value and Productivity specification sheettruck based on: 3290mm (GDP20/25VX) Top ofForks 2-stage LFL Standard carriage, 1000mmforks and e-hydraulics.

Yale

GDP 25 VX

Productivity



Base


Drum brakesDieselSeated2.5500471162339615775 / 6861780 / 2181SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 X 100 X 1000II A1067107160388740872216629202070238216.9 / 18.016.9 / 18.00.61 / 0.710.58 / 0.5017440 / 1145021.0 / 29.36.0 / 5.0HydraulicYanmar 4TNE9233.927004 / 26593.0 Hydrodynamic0 - 1557545.852.879 102Pin

Productivity



Base


Drum brakesDieselSeated2.5500471162339615775 / 6861780 / 2181SE7.00 X 12 - 126.00 X 92x / 2965967

217014032503904216021811061365355925591157 / 1317 / 160140 X 100 X 1000II A1067107160388740872216629202070238218.2 / 19.318.2 / 19.30.68 / 0.680.58 / 0.5019500 / 1145023.8 / 28.75.5 / 4.4HydraulicYanmar 4TNE9843.026004 / 33193.3 Hydrodynamic0 - 1557545.852.879 102Pin

Productivity



1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.7.1

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.8

For Value models fitted with manual levers, thevalue for lines 5.2 and 7.5 are as on the Base VDItable.

Value


Drum or Wet brakesDieselSeated2.5500471162339615775 / 6861780 / 2181SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 X 100 X 1000II A1067107160388740872216629202070238216.9 / 18.016.9 / 18.00.59/0.650.58 / 0.5017440 / 1145021.0 / 29.36.0 / 5.0HydraulicYanmar 4TNE9233.927004 / 26593.0 Hydrodynamic0 - 1557545.852.879102Pin

VX series6

VDI 2198 - General Specifications, Diesel powered GDP 30VX, GDP 35VX


↕ Variable.▲ Top of forks.

✘ Full suspension seat in depressed position.◗ Add 32mm with load backrest.❍ h6 subject to +/- 5mm tolerance.


✚ Without load backrest.* at 1.6km/h

** at 4.8km/h ❉ with Load Sensing Hydraulics (LSH).

Dis

tingu

ishi

ng m

ark

Wei

ghts

Ty

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a Co

mbu

stion

-eng

ineA

dditi

on d

ata

Yale

GDP 30 VX

Base


Drum brakesDieselSeated3.0500483162344376662 / 7751845 / 2592SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740718.2 / 19.118.2 / 19.10.47 / 0.620.53 / 0.4716354 / 1170815.0 / 26.66.2 / 5.3HydraulicYanmar 4TNE9233.927004 / 26593.2 Hydrodynamic0 - 1557545.852.879 102Pin



Brake typeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, order-pickerRated capacity/rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weightAxle loading, laden front/rear Axle loading, unladen front/rear Tyres: L = pneumatic, V = cushion, SE = supercushionTyre size, frontTyre size, rearWheels, number front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carriage forward/backward Height of mast, loweredFree lift ▲Lift ▲Height, mast extended ✚Height of overhead guard (cabin) ❍Cab height (open cab)Seat height/stand height ✘Coupling heightOverall length Length to face of forks Overall width ■Fork dimensionsFork carriage DIN15176, class/type A,BFork carriage width ◗Ground clearance, laden, below mastGround clearance, centre of wheelbaseAisle width for pallets 1000 long x 1200 crossways Aisle width for pallets 800 wide x 1200 lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed, laden/unladen Travel speed, laden/unladen, backwardsLift speed, laden/unladenLowering speed, laden/unladenDrawbar pull, laden/unladen *Gradeability, laden/unladen **Acceleration time, laden/unladen Service brakeEngine manufacturer/typeEngine power according to ISO 1585Rated speedNumber of cylinders/displacementFuel consumtion according to VDI cycle ❉Type of drive unitOperating pressure for attachmentsOil volume for attachments ↕Hydraulic tank, capacityFuel tank, capacitySound pressure level at the driver’s seat ★Guaranteed sound power 2001/14/ECTowing coupling, type DIN

Base


Drum brakesDieselSeated3.0500483162344376662 / 7751845 / 2592SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740718.2 / 19.118.2 / 19.10.47 / 0.620.53 / 0.4716354 / 1170815.0 / 26.66.2 / 5.3HydraulicYanmar 4TNE9233.927004 / 26593.2 Hydrodynamic0 - 1557545.852.879 102Pin



b3 (mm)m1 (mm)m2 (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)

(mm)(mm)km/hkm/hm/sm/sN%s


barl/minlitreslitresdB (A)dB (A)

Value


Drum or Wet brakesDieselSeated3.0500483162344376662 / 7751845 / 2592SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740718.2 / 19.218.2 / 19.10.51/0.570.53 / 0.4716354 / 1170815.0 / 26.66.2 / 5.3HydraulicYanmar 4TNE9233.927004 / 26593.2 Hydrodynamic0 - 1557545.852.879 102Pin

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.7.1

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.2

10.8

7

Dis

tingu

ishi

ng m

ark

Wei

ghts

Ty

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a Co

mbu

stion

-eng

ineA

dditi

on d

ata

Base specification sheet truck based on:3105mm (GDP30/35VX) Top of Forks 2-stage LFLStandard carriage, 1000mm forks and manuallevers.

Value and Productivity specification sheettruck based on: 3105mm (GDP30/35VX) Top ofForks 2-stage LFL Standard carriage, 1000mmforks and e-hydraulics.

Yale

GDP 35 VX

Productivity

Yanmar 3.0L / Techtronix100X 2-Speed

Wet brakesDieselSeated3.0500483162344376662 / 7751845 / 2592SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740721.1 / 21.416.2 / 16.60.52 / 0.560.53 / 0.4719850 / 1140018.2 / 26.55.9 / 5.2HydraulicYanmar 4TNE94L34.224504 / 30543.5 Hydrodynamic0 - 1557545.852.879 102Pin

Productivity

Yanmar 3.0L /Techtronix 100X 2-Speed

Wet brakesDieselSeated3.5500483170047547336 / 9281804 / 2950SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 X 120 X 1000III A1067132185405842582380647211172740721.1 / 21.416.2 / 16.60.52 / 0.560.53 / 0.4719700 / 1140016.1 / 24.36.2 / 5.3HydraulicYanmar 4TNE94L34.224504 / 30543.8Hydrodynamic0 - 1557545.852.879 102Pin

Base


Drum brakesDieselSeated3.5500483170047547336 / 9281804 / 2950SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 X 120 X 1000III A1067132185405842582380647211172740720.0 / 21.120.0 / 21.1 0.60 / 0.600.53 / 0.4717450 / 1100016.5 / 24.36.0 / 4.8HydraulicYanmar 4TNE9843.026004 / 33194.3 Hydrodynamic0 - 1557545.852.879 102Pin

Productivity

Yanmar 3.0L /Techtronix 200X 2-Speed

Wet brakesDieselSeated3.5500483170047547336 / 9281804 / 2950SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 X 120 X 1000III A1067132185405842582380647211172740721.1 / 21.416.2 / 16.6 0.52 / 0.560.53 / 0.4719700 / 1140016.1 / 24.36.2 / 5.3HydraulicYanmar 4TNE94L34.224504 / 30543.8 Hydrodynamic0 - 1557545.852.879 102Pin

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.7.1

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.8

For Value models fitted with manual levers, thevalue for lines 5.2 and 7.5 are as on the BaseVDI table.

Value

Yanmar 3.3L /Techtronix 100 1-Speed

Drum brakesDieselSeated3.5500483170047547336 / 9281804 / 2950SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 X 120 X 1000III A1067132185405842582380647211172740720.0 / 21.120.0 / 21.1 0.55/0.550.53 / 0.4717450 / 1100016.5 / 24.36.0 / 4.8HydraulicYanmar 4TNE9843.026004 / 33194.3 Hydrodynamic0 - 1557545.852.879 102Pin

Productivity


Wet brakesDieselSeated3.0500483162344376662 / 7751845 / 2592SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740721.1 / 21.416.2 / 16.60.52 / 0.560.53 / 0.4719850 / 1140018.2 / 26.55.9 / 5.2HydraulicYanmar 4TNE94L34.224504 / 30543.5 Hydrodynamic0 - 1557545.852.879 102Pin

VX series8

VDI 2198 - General Specifications, LPG powered GLP 20VX, GLP 25VX

** Engine date based on maximum capaciy displacement.


↕ Variable.▲ Top of forks.✘ Full suspension seat in depressed position.◗ Add 32mm with load backrest.

❍ h6 subject to +/- 5mm tolerance. GLP20-25VX add 25mm when front tyre size 28 x 9-15 is selected.


✚ Without load backrest.* at 1.6km/h** at 4.8km/h❉ with Load Sensing Hydraulics (LSH).

Dis

tingu

ishi

ng m

ark

Wei

ghts

Ty

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a Co

mbus

tion-

engin

eA

dditi

on d

ata



Brake typeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, order-pickerRated capacity/rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weightAxle loading, laden front/rear Axle loading, unladen front/rear Tyres: L = pneumatic, V = cushion, SE = supercushionTyre size, frontTyre size, rearWheels, number front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carriage forward/backward Height of mast, loweredFree lift ▲Lift ▲Height, mast extended ✚Height of overhead guard (cabin) ❍Cab height (open cab)Seat height/stand height ✘Coupling heightOverall length Length to face of forks Overall width ■Fork dimensionsFork carriage DIN15176, class/type A,BFork carriage width ◗Ground clearance, laden, below mastGround clearance, centre of wheelbaseAisle width for pallets 1000 long x 1200 crossways Aisle width for pallets 800 wide x 1200 lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed, laden/unladen Travel speed, laden/unladen, backwardsLift speed, laden/unladenLowering speed, laden/unladenDrawbar pull, laden/unladen *Gradeability, laden/unladen ** Acceleration time, laden/unladen Service brakeEngine manufacturer/typeEngine power according to ISO 1585Rated speedNumber of cylinders/displacementFuel consumtion according to VDI cycle ❉Type of drive unitOperating pressure for attachmentsOil volume for attachments ↕Hydraulic tank, capacitySound pressure level at the driver’s seat ★Sound power level during the workcycleGuaranteed sound power 2001/14/ECTowing coupling, type DIN

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.7.1

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.7

10.7.1

10.7.2

10.8

Yale

GLP 20 VXValue

Mazda 2.2L / Techtronix 100 1-Speed

Drum or Wet brakesLPGSeated 2.0500471162335155003 / 5121807 / 1708SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 X 100 X 1000II A1067107160382040202149629198770238217.1 / 18.017.1 / 18.00.55/0.560.58 / 0.5016937 / 1208219.0 / 29.85.3 / 4.4HydraulicMazda F238.027004 / 21842.38Hydrodynamic0 - 1556245.879-102Pin

Base

**Mazda 2.2L / StandardElectronic 1-Speed

Drum brakesLPGSeated 2.0500471162335155003 / 5121807 / 1708SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 X 100 X 1000II A1067107160382040202149629198770738217.1 / 18.017.1 / 18.00.56 / 0.570.58 / 0.5016937 / 1208219.0 / 29.85.3 / 4.4HydraulicMazda F238.027004 / 21842.62 Hydrodynamic0 - 1556245.879-102Pin






barl/minlitresdB (A)dB (A)dB (A)

Productivity

Kubota 2.5L / Techtronix 100 1-Speed

Drum or Wet brakesLPGSeated 2.0500471162335155003 / 5121807 / 1708SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 X 100 X 1000II A1067107160382040202149629198770238216.7 / 17.016.7 / 17.00.62 / 0.640.58 / 0.5019085 / 1100025.5 / 32.14.5 / 4.0HydraulicKubota 2.5L43.925004 / 24912.60Hydrodynamic0 - 1556645.87896100Pin

9

Dis

tingu

ishi

ng m

ark

Wei

ghts

Ty

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a Co

mbu

stion

-eng

ineA

dditi

on d

ata

Base specification sheet truck based on:3290mm (GLP20/25VX) Top of Forks 2-stage LFLStandard carriage, 1000mm forks and manuallevers.

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.7.1

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.7

10.7.1

10.7.2

10.8

Value and Productivity specification sheettruck based on: 3290mm (GLP20/25VX) Top ofForks 2-stage LFL Standard carriage, 1000mmforks and e-hydraulics.

For Value models fitted with manual levers,the value for lines 5.2 and 7.5 are as on theBase VDI table.

Yale

GLP 25 VXProductivity Kubota 2.5L / Techtronix100X 2-SpeedWet brakesLPGSeated 2.5500471162338535732 / 6211737 / 2116SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 X 100 X 1000II A1067107160388740872216629202070238220.8 / 21.216.3 / 16.60.57 / 0.610.58 / 0.5020825 / 1050022.7 / 28.05.1 / 4.4HydraulicKubota 2.5L43.925004 / 24912.90Hydrodynamic0 - 1556645.87896100Pin

Productivity

Kubota 2.5L / Techtronix200X 1-Speed

Wet brakesLPGSeated 2.5500471162338535732 / 6211737 / 2116SE28 X 9 - 156.00 X 92x / 29659676 / 5217014032503904216021811061365355925591186 / 1321 / 160140 X 100 X 1000II A1067107160388740872216629202072740722.6 / 23.017.8 / 18.10.57 / 0.610.58 / 0.5019460 / 1050022.0 / 28.04.7 / 4.1HydraulicKubota 2.5L43.925004 / 24912.90Hydrodynamic0 - 1556645.87896100Pin

Productivity

Kubota 2.5L /Techtronix 100 1-Speed

Drum or Wet brakesLPGSeated 2.5500471162338535732 / 6211737 / 2116SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 X 100 X 1000II A1067107160388740872216629202070238216.7 / 17.016.7 / 17.00.62 / 0.640.58 / 0.5018946 / 1050021.8 / 28.04.7 / 4.1HydraulicKubota 2.5L43.925004 / 24912.80Hydrodynamic0 - 1556645.87896100Pin

Value

Mazda 2.2L /Techtronix 100 1-Speed

Drum or Wet brakesLPGSeated 2.5500471162338535732 / 6211737 / 2116SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 X 100 X 1000II A1067107160388740872216629202070238217.1 / 18.017.1 / 18.00.55 / 0.560.58 / 0.5016857 / 1145016.0 / 29.05.6 / 4.5HydraulicMazda F238.027004 / 21842.70Hydrodynamic0 - 1556245.879-102Pin

Productivity


Wet brakesLPGSeated 2.0500471162335155003 / 5121807 / 1708SE28 X 9 - 156.00 X 92x / 29659676 / 5217014032503904216021811061365348624861186 / 1321 / 160140 X 100 X 1000II A1067107160382040202149629198772740722.6 / 23.017.8 / 18.10.58 / 0.610.58 / 0.5019613 / 1100025.7 / 32.14.5 / 4.0HydraulicKubota 2.5L43.925004 / 24912.70Hydrodynamic0 - 1556645.87896100Pin

Base


Drum brakesLPGSeated 2.5500471162338535732 / 6211737 / 2116SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 X 100 X 1000II A1067107160388740872216629202070738217.1 / 18.017.1 / 18.00.56 / 0.570.58 / 0.5016857 / 1145016.0 / 29.05.6 / 4.5HydraulicMazda F238.027004 / 21842.98Hydrodynamic0 - 1556245.879-102Pin

Productivity


Wet brakesLPGSeated 2.0500471162335155003 / 5121807 / 1708SE7.00 X 12 - 126.00 X 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 X 100 X 1000II A1067107160382040202149629198770238220.8 / 21.216.3 / 16.60.58 / 0.610.58 / 0.5020875 / 1100026.5 / 32.14.9 / 4.3HydraulicKubota 2.5L43.925004 / 24912.70Hydrodynamic0 - 1556645.87896100Pin

VX series10

VDI 2198 - General Specifications, LPG powered GLP 30VX, GLP 35VX

** Engine date based on maximum capaciy displacement.


↕ Variable.▲ Top of forks.✘ Full suspension seat in depressed position.◗ Add 32mm with load backrest.

❍ h6 subject to +/- 5mm tolerance. GLP20-25VX add 25mm when front tyre size 28 x 9-15 is selected.


✚ Without load backrest.* at 1.6km/h.** at 4.8km/h.❉ with Load Sensing Hydraulics (LSH).

Dis

tingu

ishi

ng m

ark

Wei

ghts

Ty

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a Co

mbus

tion-

engin

eA

dditi

on d

ata



Brake typeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, order-pickerRated capacity/rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weightAxle loading, laden front/rear Axle loading, unladen front/rear Tyres: L = pneumatic, V = cushion, SE = supercushionTyre size, frontTyre size, rearWheels, number front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carriage forward/backward Height of mast, loweredFree lift ▲Lift ▲Height, mast extended ✚Height of overhead guard (cabin) ❍Cab height (open cab)Seat height/stand height ✘Coupling heightOverall length Length to face of forks Overall width ■Fork dimensionsFork carriage DIN15176, class/type A,BFork carriage width ◗Ground clearance, laden, below mastGround clearance, centre of wheelbaseAisle width for pallets 1000 long x 1200 crossways Aisle width for pallets 800 wide x 1200 lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed, laden/unladen Travel speed, laden/unladen, backwardsLift speed, laden/unladenLowering speed, laden/unladenDrawbar pull, laden/unladen *Gradeability, laden/unladen ** Acceleration time, laden/unladen Service brakeEngine manufacturer/typeEngine power according to ISO 1585Rated speedNumber of cylinders/displacementFuel consumtion according to VDI cycle ❉Type of drive unitOperating pressure for attachmentsOil volume for attachments ↕Hydraulic tank, capacitySound pressure level at the driver’s seat ★Sound power level during the workcycleGuaranteed sound power 2001/14/ECTowing coupling, type DIN

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.7.1

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.7

10.7.1

10.7.2

10.8

Yale

GLP 30 VXValue

Mazda 2.2L / Techtronix 100 1-Speed

Drum or Wet brakesLPGSeated 3.0500483162343296619 / 7101802 / 2527SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740718.0 / 19.118.0 / 19.10.48/0.490.53 / 0.4716274 / 1170814.0 / 25.06.0 / 4.8HydraulicMazda F238.027004 / 21843.03Hydrodynamic0 - 1556245.879- 102Pin

Base


Drum brakesLPGSeated 3.0500483162343296619 / 7101802 / 2527SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740718.0 / 19.118.0 / 19.10.49 / 0.500.53 / 0.4716274 / 1170814.0 / 25.06.0 / 4.8HydraulicMazda F238.027004 / 21843.34Hydrodynamic0 - 1556245.879- 102Pin






barl/minlitresdB (A)dB (A)dB (A)

Productivity

Kubota 2.5L / Techtronix 100 1-Speed

Drum or Wet brakesLPGSeated 3.0500483162343296619 / 7101802 / 2527SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740717.8 / 18.217.8 / 18.20.55 / 0.560.53 / 0.4717380 / 1080017.6 / 26.14.9 / 4.2HydraulicKubota 2.5L43.925004 / 24913.00Hydrodynamic0 - 1556645.87896100Pin

11

Dis

tingu

ishi

ng m

ark

Wei

ghts

Ty

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a Co

mbu

stion

-eng

ineA

dditi

on d

ata

Base specification sheet truck based on:3290mm (GLP20/25VX) Top of Forks 2-stage LFLStandard carriage, 1000mm forks and manuallevers.

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.7.1

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.7

10.7.1

10.7.2

10.8

Value and Productivity specification sheettruck based on: 3290mm (GLP20/25VX) Top ofForks 2-stage LFL Standard carriage, 1000mmforks and e-hydraulics.

For Value models fitted with manual levers,the value for lines 5.2 and 7.5 are as on theBase VDI table.

Yale

GLP 35 VXProductivity Kubota 2.5L / Techtronix100X 2-SpeedWet brakesLPGSeated 3.5500483170046467283 / 8631761 / 2885SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 X 120 X 1000III A1067132185405842582380647211172740722.0 / 22.717.8 / 17.90.48 / 0.530.53 / 0.4719120 / 1060016.4 / 23.95.6 / 4.7HydraulicKubota 2.5L43.925004 / 24913.40Hydrodynamic0 - 1556645.87896100Pin

Productivity


Wet brakesLPGSeated 3.5500483170046467283 / 8631761 / 2885SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 X 120 X 1000III A1067132185405842582380647211172740722.0 / 22.717.8 / 17.90.48 / 0.530.53 / 0.4719120 / 1060016.4 / 23.95.6 / 4.7HydraulicKubota 2.5L43.925004 / 24913.40Hydrodynamic0 - 1556645.87896100Pin

Productivity

Kubota 2.5L / Techtronix100 1-Speed

Drum or Wet brakesLPGSeated 3.5500483170046467283 / 8631761 / 2885SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 X 120 X 1000III A1067132185405842582380647211172740717.8 / 18.217.8 / 18.20.56 / 0.560.53 / 0.4717230 / 1060015.6 / 23.95.2 / 4.3HydraulicKubota 2.5L43.925004 / 24913.20Hydrodynamic0 - 1556645.87896100Pin

Value

Mazda 2.2L / Techtronix100 1-Speed

Drum or Wet brakesLPGSeated 3.5500483170046467283 / 8631761 / 2885SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 X 120 X 1000III A1067132185405842582380647211172740718.0 / 19.118.0 / 19.10.48/0.490.53 / 0.4715735 / 1259413.5 / 23.06.2 / 4.9HydraulicMazda F238.027004 / 21843.29Hydrodynamic0 - 1556245.879- 102Pin

Productivity


Wet brakesLPGSeated 3.0500483162343296619 / 7101802 / 2527SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740722.0 / 22.717.8 / 17.90.49 / 0.530.53 / 0.4719270 / 1080018.5 / 26.15.4 / 4.6HydraulicKubota 2.5L43.925004 / 24913.20Hydrodynamic0 - 1556645.87896100Pin

Base

Mazda 2.2L / StandardElectronic 1-Speed

Drum brakesLPGSeated 3.5500483170046467283 / 8631761 / 2885SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 X 120 X 1000III A1067132185405842582380647211172740718.0/19.118.0 / 19.10.49 / 0.500.53 / 0.4715735 / 1259413.5 / 23.06.2 / 4.9HydraulicMazda F238.027004 / 21843.62Hydrodynamic0 - 1556245.879- 102Pin

Productivity Kubota 2.5L / Techtronix100X 2-SpeedWet brakesLPGSeated 3.0500483162343296619 / 7101802 / 2527SE28 X 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 X 120 X 1000III A1067132185395541552277618207772740722.0 / 22.717.8 / 17.90.49 / 0.530.53 / 0.4719270 / 1080018.5 / 26.15.4 / 4.6HydraulicKubota 2.5L43.925004 / 24913.20Hydrodynamic0 - 1556645.87896100Pin

VX seriesModels: GDP/GLP 20VX, 25VX, 30VX, 35VX

Yale Veracitor VX SeriesThis series of trucks is available in threeconfigurations.The Veracitor Base truck offers first-rateperformance for a wide variety of applications,geared to minimise cost of acquisition withoutcompromising performance.The Veracitor Value truck provides excellentperformance applications optimised for lowesthourly operating cost.The Veracitor Productivity truck deliversmaximum performance for medium to heavy-duty applications with state-of-the art featuresand industry leading power.EnginesYale Veracitor truck is powered by a range ofheavy duty industrial engines, designed todeliver power efficiently over a 20,000 hourdesign life with 500 hour service intervals. Allengines feature Cast Iron Blocks and a 5 mainbearing design; engines are fully isolated fromthe frame and axle to prevent directtransmission of noise and vibration, resulting inlow vehicle noise and vibration levels.Variations in LPG fuel and its higher burningtemperatures present challenges for convertedGasoline Engines and Yale has developed stateof the art electronic fuel injection systems,which use closed loop control to maintainproper fuelling in all operating conditions.These advanced Industrial Engines feature coilover plug spark designs, and speciallyhardened intake and exhaust valve seats toensure long operating life.The high performance Kubota 2.5L LPG enginemaximises performance and productivity forintensive operations, and with Cast Iron headand special 9.5 Litre Oil capacity is designed todo so reliably for the life of the truck. Advancedengine control s allow fuel mapping to beoptimised to allow highly efficient operation inECO–eLo (Fuel efficiency) mode, with minimumloss of performance.Heavy Duty Diesel Engines from Yanmar havesuper quick glow plugs allowing the engine tostart quickly and reliably under cold conditions,the cold start device delivering a cleanerexhaust by advancing the fuel injection timingbased on water temperature. Emissions havebeen reduced by controlling fuel injectiontiming according to engine load.MastsThe range of new masts provides the driverwith excellent visibility both through the mastand panoramically. The mast has a robustdesign and offers excellent rigidity particularlyat full lift height. They are manufactured withoutcompromise to provide robust and reliableperformance, with minimal maintenance costover the lifetime of the product.TransmissionFour transmission selections are available withmultiple engine configurations for a widevariety of material handling applications.

1) Standard Electronic features electronicinching, electric shift control, neutral startswitch, antirestart protection and heavy dutyclutch packs.2) The TechtronixTM 100 has all the StandardElectronic features plus an Auto DecelerationSystem.3) The TechtronixTM 100X has all theTechtronixTM 100 features, plus Two SpeedAuto Shift (2 x forward, 1 x reverse).Load Sensing HydraulicsWith AccuTouchTM electrohydraulic controlsLoad Sensing Hydraulics (LSH) deliversincreased operational efficiency, offering a15% reduction in fuel consumption on the VDIcycle, with no loss in productivity*. Variabledisplacement piston pumps match the flowrate and lifting speed continuously to thedemands of the duty cycle. O-ring face sealfittings are used in all high pressure hydraulicconnections. The engine therefore suppliesonly power to the hydraulic pumps whenrequired, so more power is available for driving.With LSH Yale also offers an ECO-eLo (FuelEfficiency) mode, reducing engine speed by20% and optimising throttle response, so thatthe truck operates in the most economicalpower range. This results in a reduction in fuelconsumption of a further 5%* but has a limitedeffect on overall truck productivity underapplication conditions. The ECO-eLo modealso delivers lower noise levels by up to 3dB(A).If a faster work rate, or higher productivity isrequired, the truck can easily be reprogrammedto HiP (High Performance) mode of operationthrough the dash display, with access securedby a unique customer password.Autospeed HydraulicsWith Autospeed Hydraulics the engine speed isautomatically increased to provide full hydraulicpower. The Pacesetter VSM maintains thecurrent travel speed (or prevents travel) untilthe operator steps on the accelerator. Nooperator inching is required and productivityand efficiency is increased by simplifyingoperator actions.Cooling SystemThe cooling system employs a 43cm bladepusher type fan. A permanently lubricatedwater pump and a high capacity, cross-flowradiator ensures rapid heat dissipation. Thesealed cooling system operates at 15psi, thecoolant recovery tank allows visual inspectionof coolant level. A transmission oil cooler isintegrated into the radiator, located in the sidetank. The optional combi-cooler radiatorfeatures an externally mounted transmission oilcooler for increased heat transfer capability. Allradiators are soft mounted for durability.Drive AxleThe drive axle is designed to withstand heavyduty applications and absorb shock loads. It isa “selfcontained” assembly isolated from thetransmission by a heavy-duty rubber isolator.The axle shafts utilize a “rolled fillet” root spline

design for increased resistance to torsionstress. A magnetic sump plug collects anymetal particles circulating in the axle oil toprevent component wear.BrakesBrakes are duo-servo hydraulic, self-energizing, and automatic adjusting drumbrake assemblies.The Value and Productivity models have oilimmersed brakes as standard. The singlecircuit master cylinder has a sealed fluidreservoir and features a fluid level sensor whichactivates an indicator light on the instrumentpanel.Hydraulic Power SteeringHydrostatic steering provides responsivecontrol and eliminates mechanical linkages forreduced surface shock and simplifiedmaintenance. The steering wheel is 30cm indiameter with a textured surface grip andspinner knob, and requires only four turns lock-to-lock. The centre mounted steer cylinder islocated within the confines of the steer axle forprotection.Steer AxleConstructed from cast steel, the steer axle isrubber shock mounted to the frame for reducedwear and vibration. The CSE (ContinuousStability Enhancement) system enhanceslateral truck stability through reduced steer axlearticulation, while simultaneously allowinguncompromised uneven surface travel.Operator’s CompartmentBase truck features cowl mounted hydrauliccontrol levers as standard, positioned on theright side of the steering column. All models areavailable with AccuTouchTM mini-lever armrest,which features a contoured design, and - inaddition to the hydraulic functions - features ahorn and direction switch.The Full Suspension Seat together with theisolated powertrain provide best in classWhole-Body Vibration levels of 0.6m/s2,ensuring that the operator remains comfortablethroughout the shift and fatigue, aches andpains are kept to a minimum. Automotive-stylepedal arrangement with a large, singleinch/brake pedal is standard. Intellix Vehicle System Management (VSM) VSM acts as a master truck controller,providing extensive monitoring and control oftruck functions and systems. CANbustechnology reduces wiring complexity andenables communications between trucksystems. The dash display transmits continualfeedback to the operator and allowscommunication of service codes. On-boarddiagnostics enable quick and easytroubleshooting. The electrical system featuressealed connectors and Hall Effect sensors forsuperior dependability.(*Yale Productivity Test Cycle: Load Sensing Hydraulicsis available on trucks with AccuTouchTM mini-levers andthe ECO-eLo function is available on trucks withTechtronixTM transmissions only).

P: +31 20 497 41 01 | F: +31 20 497 48 65

[email protected] | www.forkliftcenter.com

Visiting Address Hornweg 18, 1045 AR Amsterdam, The Netherlands

Postal Address PO Box 20595, 1001 NN Amsterdam, The Netherlands

Safety. This truck conforms to the current EU requirements. Specification is subject tochange without notice.

Yale, VERACITOR and are registered trademarks. “PEOPLE, PRODUCTS,PRODUCTIVITY”, PREMIER, Hi-Vis, and CSS are trademarks in the United States andcertain other jurisdictions. MATERIALS HANDLING CENTRAL and MATERIAL HANDLINGCENTRAL are Service Marks in the United States and certain other jurisdictions.

is a Registered Copyright. © Yale Europe Materials Handling 2014. All rights reserved.

Truck shown with optional equipment

Printed in The United Kingdom (0314HG) ENPublication part no. 290000120 Rev.25

vx series diesel and lp gas forklift trucks · kubota, lpg productivity 4 cylinder overhead valve...

Documents