walsall e0301 manual call point with break glass - hazardous area zone 1 & zone 2
TRANSCRIPT
Cornwallis Road, West Bromwich, West Midlands, B70 7DX, UKTel: +44 (0)121 500 6161 ~ Fax: +44 (0)121 500 6300Web: www.walsall-ltd.com ~ Email: [email protected]
Walsall Middle EastRAK Free Trade Zone, P. O. Box 10559 Ras Al Khaimah, United Arab EmiratesTel: +971 (0) 7 2660039Fax: +971 (0) 7 2660242Email: [email protected]: [email protected]
Walsall North America 11490 Westheimer, Suite 850Houston 77077Texas, USATel: +1 (713) 425 6361Fax: +1 (713) 783 0067
Walsall Asia Pacific10 Upper Aljunied Link,York International Industrial Building #02-05 Singapore 367904Tel: +65 (0) 6858-5259Fax: +65 (0) 6858-6560Email: [email protected]
Walsall South AmericaAv Nilo Pecanha, 50.Sala 1709. Centro, Rio De Janeiro,RJ, Brazil.CEP, 20020-906.Tel: +55 (21) 2025 1059Fax: +55 (21) 3084-1446
Emergency Shutdown and Signalling Equipment
117
113
Ø8
120
113
A
B
C D
117
All Dimensions in mm.
Description Switch Position Resistor (s) Product Code
Fire Alarm without Resistors 1N/O and 1N/C - E030110
Fire Alarm with Series Resistors 1N/O and 1N/C To be specified E030111
Fire Alarm with end of the line Resistors 1N/O and 1N/C To be specified E030112
Fire Alarm with series & end of the line Resistors 1N/O and 1N/C To be specified E030113
ORDERING INFORMATION
ELECTRICAL SPECIFICATION
Operating Voltage Operating Current Conductor Size
Volts Max Amps mm² Max
415 2 max 2.5
Type E0301- Ex d IIC Manual Call point with Break Glass in Cast Iron
Material Cast Iron to 180BSI1452:1997
Finish Zinc rich epoxy powder primer and epoxy powder top coat
Colour Red (Other colours available)
Weight 4.5 Kg
Cover Fixing M6 allen head stainless steel screws
Gasket Nitrile O ring
Plastic Components Polycarbonate
Operator Flamepath Brass shaft in brass housing. Nitrile O ring seal
Entries 1x20mm threaded hole in face A, fitted with a nylon Ex e stopping plug. 1x20mm threaded hole in face B, fitted with a nylon Ex e cable gland. 25mm entries are available as an option.
Earthing Internal and external Ex e brass clamps on base. Earth on cover
ENCLOSURE SPECIFICATION
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD
Type of Protection Ex d IIC T* GbEx tb IIIC T**°C Db
Ambient Temp.°C Gas Temperature Class (T*C)
Dust Temperature Class (T**)(°C)Min Max
-20* +50 T6 80
* -40°C when used with a plug and gland rated to -40°C
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 1,2,21,22
Certification No. SIRA03ATEX1312