Want to stand out from the competition? Why not custom design a Flash Drive that reflects your corporate

personality?

How to build custom flash drives…the easy way!

We make 100’s of custom designed flash drives each year. Working through your professional promotional products distributor we have built custom designed flash drives for major corporations and small business’s around the world. Disney, Pixar, Heineken, Princess Cruises and many others know the value of a specific corporate identity…….why aren’t you working the way the big boys are?

You probably think that its too expensive…? Think again!

How to build custom flash drives…the easy way!

On average our minimum custom flash drive order (including the PVC mould and your first prototype) typically cost $1.00-$2.00 more per piece than your average drive. The impact on your marketing and corporate presence will be immeasurable. Do you want to stand out or stand on the sidelines?

How does it work, what does it cost, how long does it take, what are my safeguards to make sure I am protected?

How to build custom flash drives…the easy way!

The process is simple, the production time is only about 10 days more and the process lets you have a graduated approval process all along the way including the steps for “rough mock-ups”, CAD drawing and first prototype……We want you to be happy with the product and we don’t want to give you anything that we are not proud of…!

Where do you start, what are the minimums, what are the steps in the process?

How to build custom flash drives…the easy way!

Starting is simple and FREE! 1st ask your distributor if we have a mould design that already exists that meets your needs. If not, send us a picture of the object (wine bottle, spaceship, Eiffel Tower etc…) and we will do 2 things. 1) Tell you if it can be made into a custom drive and if it can do a rough mock-up for FREE.

Customer originally sent this artwork….wasn’t sure if they

wanted Orange or Green flavor!

We sent them back a very “ROUGH MOCK-UP” to give them an idea

what it might look like.

If you and your company likes the idea and everyone is on board…What happens next?

How to build custom flash drives…the easy way!

We produce a CAD (Computer Assisted Drawing). This is an engineers perspective on what it will look like, dimensions, shape and how it will work. The great part is this is FREE as well!!!

They liked the idea and originally wanted a CAD drawing done with a yellow backing and a Green “Mint” epoxy dome front……We sent them this CAD drawing………They loved

the idea but wanted to have it all in Green “Mint”….the go ahead was

given…..

You love the idea and the CAD….what next?

How to build custom flash drives…the easy way!

This is where you move forward. Minimums on a custom made flash drive is 500 units with a 512MB memory. If this is ok we then make you the first mould and prototype. This takes 7-10 working days from start of the order to having the prototype in your hands. The prototype allows you to see exactly what your custom designed flash drive will look and perform like. Once you approve the prototype we will start production on the whole order.

3 weeks later, we produced 1000 2GB Stride Gum pack flash drives….We Make it Easy!

Prototype is approved, production is started…..when do I get it…? What do I get with it….?

How to build custom flash drives…the easy way!

The average production time:

3-4 days for rough mock up and CAD drawing

10 days for the prototype

14 days for production

Total average production time 30 days with quick approval!

Increase the perceived value of your project with :

The fine print….there is always fine print…..where’s the fine print….huh?

How to build custom flash drives…the easy way!

Yes there is ALWAYS fine print……so here it is…..!•Minimum orders are 500 pieces and 512 of MB memory, with further memory increments of 1GB, 2GB, 4GB and 8GB! 16 GB is coming soon……

•Upon placement of the PO# on any custom flash drive 100% payment is required. This is to be done after approval of the CAD drawing and before we start a new mould.

•The average production time including first mould, prototype and the finished production run is 21-23 days on average. The production will start upon completion of the PO process and deposit.

•All of our products are fully guaranteed. In the case of any faulty custom drives we will either refund you or credit your account. If we can repair the drive we will…..but since we only use the best components available it is very rare that we have to consider any of this……

•That’s it….! We will walk you through the entire process, making it as easy as possible…..just ask for more details.