Presentation on war field spying robot with a night vision

wireless camera

Submitted to: Mr. Pankaj Chawla Mr. Bhupendra singh ojha

Submitted by: Roopal Pancholi Sapna sharma

Monika uppadhya

Project Description The project is designed to develop a robotic vechicle using an

android applications for remote operation attached with wireless camera for monitoring purpose.

The robot along with camera can wirelessly transmit real time video with night vision capabilities.

This kind of robot can be helpful for spying purpose in war fields. An Rfmodule of 434 MHz of frequency is used for the desired operation .

At the transmitting end using android app device commands are sent to the reciever to control the movement of the robot either to move forward,backward & left or right etc. At the receiving end two motors are interfaced to th module where they are used for the movement of vechicle.

•Remote operation is achieved by any smart-phone/tablet etc., with andoroid OS , upon a GUI based touch screen operation .

•The acts as a remote control that has the reciever end bluetooth device fed to the module drives Dcmmotors via motor driver IC for necessary work.

Project Highlights Branding Free materialCall-mial for Tech Support from 10am – 7 pm.Pre –programmed RF- module of 434 MHz.All inclusive solution kitEasy to use , sellf exaplanatory kitExtensive audio-visuals available

Block Diagram

Project SpecificationsMotor 1. 1 set included2. To be used with: “Assembled and tested printed circuit board”

provided with the DIY kit (or)3. Alternatively with the project assembled by you.

RF- module of 434Mhz of frequency1. Part of the ready to use “Assembled & tested printed circuit

board”.2. Detach & use with the printed circuit boars assembled by you.

Bluetooth device1. 1 set included2. Part of the ready to use “Assembled & tested printed

circuit board”3. Detach & use with the printed circuit board

assembled by you.

Motor driver IC4. 1 set included 5. Part if the ready to use “Assembled & tested printed

circuit board .6. Detach & use with the printed circuit board

assembled by you.

Cell1. 4 numbers required 2. Not supplied with the kit for security reasons.3. To be used with: “Assembled& tested printed circuit

board “ provided with the DIY kit (or)4. Alternatively with the project assembled by you.

Rechargeable Battery 1. 2 numbers required 2 Not supplied with kit security reasons3. To be used with :”Assembled &Tested printed

circuit board provided with DIY kit (or)4. Alternatively with the project assembled by you.

Clamps 1. 1 set included2. To be used with :”Assembled & tested chemical PCB.Soldering Iron 3. 1 number kit 4. A part of tool kit 5. Used for soldering the components on the CHEMICAL

pcb .

Cutter 1. 1 number included2. Apart of tool kit 3. Used to measure voltages, resistances, continuity etc.

Multimeter 1. 1 number included 2. A part of tool kit3. Used to remove IC’s , connect loads etc.

Micellaneous Items 1. Extra terms not specified above provided as per the project

requirement , if any.

Hardware/Software Requirements Hardware Rquirements 1. RF module of 434 Mhz2. Dcmotors3. Motor driver IC 4. Push Button 5. Diodes 6. Resistors 7. Capacitors 8. Wireless Camera9. Bluetooth device

Software Requirements1. Keil computer2. Language : embedded C or assembly 3. Android application

Conclusion With the help of this project we learn many things such as

soldering, using android applications .This project is helpful in war, spying works etc.