warp9 led with picoprism optics - hubbellcdn · led performance and lumen output continues to...
TRANSCRIPT
WARP9® LED with PicoPrism™ Optics
FLAIR, WITH NO GLARE
Originally introduced in 2007, the Kim WARP9 luminaire set the
standard for slim, sleek, low-profile site lighting, blending seamlessly
into countless outdoor projects. Where typical site lighting might
attempt to call attention to itself, WARP9 was designed to disappear
from the site, to avoid detection and allow the natural beauty of the
architecture to shine through.
WARP9® LED with PicoPrism™ Optics
KIM LIGHTING | www.kimlighting.com
WARP9 LED PicoPrism Module
www.kimlighting.com | KIM LIGHTING 1
PERFORMANCE
The advent of Kim’s revolutionary new PicoPrism optics means the full potential of the
WARP9’s design has truly been realized. With Kim’s new PicoPrism optics, the WARP9 enjoys
a 150% boost in lumen output, 22,000 plus lumens while preserving the same timeless
aesthetic that’s made it the clear designers’ choice.
By making use of this highly-controlled, solid-state aimed optics combined with advanced, state-
of-the art LED technology, the WARP9 harnesses the power of today’s high-performance diodes.
Each PicoPrism module is constructed to IP66 standards, and has been engineered to produce
the maximum level of output with minimal energy consumption, channeling this powerful LED
optic to collect and distribute uniform illumination with reduced glare and a high comfort factor.
LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting’s IES File Library. For custom optics and color temperature configurations, contact factory.
ABSOLUTE LUMENS (700mA) – For 350mA, refer to Specification Sheet at www.kimlighting.com
Temperature Type I Type II Type III Type III-NFO Type IV Type IV-NFO Type V Type L/R
WP9S
3000K 8662 8667 8559 7621 8719 7822 8713 8475
4200K 1105 11112 11069 9770 11178 10028 11170 10866
5100K 12740 12783 12662 10161 12904 10429 12895 12532
WP9L
3000K 18077 17734 17796 TBD 17659 14577 18216 17378
4200K 23645 23645 23728 TBD 23430 19340 24288 22280
5100K 24103 24590 24678 TBD 24429 20165 25259 23171
WARP9® LED with PicoPrism™ Optics
2 KIM LIGHTING | www.kimlighting.com
FLEXIBILITY
PicoPrism WARP9 luminaires are highly customizable and can achieve any IES
distribution, as well as custom distributions. PicoPrism optics allow for
incredible versatility, tight cutoffs, flexible focus ensures that the light goes
where it’s desired, and ONLY where it’s desired.
TYPE I – For narrow pathways or residential streets, 5 mounting heights apart.
TYPE II – For narrow roads or residential streets, 5 mounting heights apart.
TYPE III – For double lane roads with two-way traffic, 5 mounting heights apart, staggered on both sides of the street.
TYPE IV – For parking lot perimeter areas with two-way traffic, 4 mounting heights apart.
TYPE V – For parking lot interior areas with lighting desired in all directions, 4 mounting heights apart.
TYPE L – For one-way road or pathway illumination position away from traffic, 4 mounting heights apart.
TYPE R – For one-way road or pathway illumination position away from traffic, 4 mounting heights apart.
NEIGHBOR FRIENDLY OPTIC
PicoPrism optics are designed to solve light trespass issues by reducing the
back light into neighboring yards or across property lines. If more shielding is
required the Neighbor Friendly Optic option is used to further reduce the
presence of light behind the pole. The no-backlight configuration meets stringent
USGBC LEED requirements in the areas of Light Pollution Reduction, Light Trespass
and Energy Efficiency. The Neighbor Friendly Optic maintains the appearance
and EPA of the luminaire and is field installable.
The USGBC logo is a trademark owned by the U.S. Green Building Council. Contact your Kim Lighting representative for additional details on creating custom distributions to meet city ordinances and strict illumination criteria.
www.kimlighting.com | KIM LIGHTING 3
RELIABILITY
WARP9 luminaires feature a comprehensive, multi-level thermal management system.
First, each WARP9 housing is equipped with heat-dissipating fins on the exterior surface, which radiate thermal
buildup from the inside out. Second, individual heat sinks on the PicoPrism module are able to draw heat directly
from the source, to ensure longer life. Last, and perhaps most important, all WARP9 luminaires come complete
with our exclusive LifeShield™ Protection System. Each PicoPrism employs temperature sensors located at the
most heat sensitive locations within the luminaire. Sensors send temperature readings in regular intervals to
on-board LifeShield monitoring devices. The system detects high ambient temperatures and temporarily reduces
current slightly to preserve diode life. Lumen output is restored to full capacity once temperatures stabilize within
acceptable limits. The end result is a highly reliable LED system that can withstand operation in even warmer,
heat sensitive environments.
The latest iteration of this landmark luminaire builds upon the established tradition of the WARP9, but makes a
wide range of dramatic improvements…All without sacrificing what made WARP9 a flagship, industry-leading
fixture right from day one. The quality, durability and versatility that have become synonymous with WARP9 are
still present in every facet. Yet, with the introduction of Kim’s exclusive PicoPrism optics, WARP9 is more capable
than it’s ever been.
WARP9® LED with PicoPrism™ Optics
4 KIM LIGHTING | www.kimlighting.com
ORDERING INFORMATION
ORDERING EXAMPLE:
1 MOUNTING: 3SY configuration is available for round poles only.
Cat. No.: 1SA 2SB 2SL 3ST 3SY 4SC 1W* EPA WP9S: 0.52 1.04 0.82 1.3 1.3 1.5 n/aEPA WP9L: 0.95 1.9 1.47 2.5 2.5 2.7 n/a
2 FIXTURE: Catalog no. designates fixture and light distribution.
Plan View:
HOUSINGWP9 = WARP9 LED
SOURCE60L = 60 LEDs (Small) 120L = 120 LEDs (Large)
SIZES = Small 60 LEDs, 130WL = Large 120 LEDs, 270W
1SA / WP9L3P70 / 120L5K240 / SG / A25-7 / PRA20-4188SA/SG
WP9
1 2 3 4 5-12 11
3 ELECTRICAL MODULE:
4 FINISH: TGIC powder coatColor: Stealth Gray Light Gray Platinum Silver White Black Dark Bronze Custom Colors Cat. No.: SG LG PS WH BL DB CC2
*Wall Mounting: A cast-aluminum mounting plate is mounted to the wall with four bolts (by others). Fixture and arm are mounted to the cast aluminum cover plate before attaching to the wall mounting plate. The fixture-arm-cover plate assembly is hooked to the wall mounting plate and secured with stainless steel screws provided. Field splices are made at the opening in the cover plate. Cover is finished to match arm and fixture color.
High temperature fuse holders factory installed inside the fixture housing. Fuse is included.
Line Volts: 120V 208V 240V 277V 347V 480VCat. No.: SF DF DF SF SF DF
5 OPTIONAL FUSING: Internal only
CURRENT70 = 700 mA
OPTIC
P = PicoPrism™
P 70
DISTRIBUTION1
1 = Type I2 = Type II3 = Type III4 = Type IV5 = Type V, Square
R = Type R, RightL = Type L, Left
2Consult your Kim Lighting representative for custom colors.
VOLTAGE120 = 120V208 = 208V240 = 240V
277 = 277V347 = 347V480 = 480V
COLOR TEMPERATURE2K = 580nm Amber3K = 3000K4K = 4200K5K = 5100K
1All distributions are classified as full cutoff
TYPE IVFORWARD
THROW
TYPE LLEFT
TYPE I TYPE VSQUARE
TYPE III TYPE RRIGHT
TYPE II
LIGHT DISTRIBUTIONS:
6 OPTIONAL PHOTOCELL RECEPTACLE: Cat. No.: A25-7
7 wire photocell receptacle provided for NEMA base photocell (by others).
Receptacle
S
1A, 1W
S – Fixture with Photocell Receptacle
S – slave unit(s)S
2B
s
S
2L
s
3T, 3Y
S
s s
S
4C
s s
s
www.kimlighting.com | KIM LIGHTING 5
Replaces standard mounting arm with a slipfitter for mounting to a horizontal pole davit-arm with 2" pipe-size mounting end (2C " O.D.). Provides ±5° vertical fixture adjustment.
6 OPTIONAL HORIZONTAL SLIPFITTER MOUNT: Cat. No.: HSF
7 OPTIONAL VERTICAL SLIPFITTER MOUNTS:
8 WIRELESS CONTROL:
9 0-10V DIMMING INTERFACE:
10 NEIGHBOR FRIENDLY OPTIC: Cat. No.: NFO
11 POLES
For wireless control options, go to http://www.hubbell-automation.com.
Driver has a 0-10V dimming interface with a dimming range of 10-100%. Approved dimmers include Lutron Diva AVTV, Lutron Nova NFTV and NTFTV. Note: Not compatible with current sourcing dimmers.
Integrated Neighbor Friendly Optic on each PicoPrism™ module to completely control unwanted backlight. Most effective withType III and IV distibutions.
See Kim Arms and Poles Selection Guide for a complete selection of round and square poles in aluminum and steel.
For full warranty see http://www.hubbelllighting.com/resources/warranty
SLIPFITTER
Cat. No.: VSF-1SAVSF-2SBVSF-2SLVSF-3ST VSF-3SYVSF-4SC
Cat. No.: SVSF-1SASVSF-2SBSVSF-2SL SVSF-3ST —— ——SVSF-4SC
Mounting Configuration1SA - Single arm mount2SB - 2 at 180°2SL - 2 at 90°3ST - 3 at 90°3SY - 3 at 120°45 - 4 at 90°
Allows standard fixture and arm to be mounted to poles having a 2 pipe-size tenon (2C " O.D. x 4K" min. length).
ROUND SQUARE
Fixture Housing
LifeShield®40 mA Max
Fixture Equivalent Circuit
Dimming Lead (+)
Dimming Lead (-)Driver5V
TYPE LLeft
TYPE IV - NFOTYPE IVForwardThrow
TYPE VSquare
TYPE III TYPE III - NFOTYPE II TYPE RRight
TYPE I TYPE LLeft
TYPE IV - NFOTYPE IVForwardThrow
TYPE VSquare
TYPE III TYPE III - NFOTYPE II TYPE RRight
TYPE I TYPE III - NFO TYPE IV - NFO
93045682 Version 1.2 (3/5/14)
16555 East Gale Avenue City of Industry, CA 91745 Phone: 626.968.5666 Fax: 626.369.2695
Printed in U.S.A.
UPGRADING HID TO LED
Existing WARP9® HID luminaires can be upgraded to the new
PicoPrism LED system. The upgrade kit installs in just minutes.
As a Kim Lighting product, the upgrade kit preserves the applicable
UL/CSA/ETL listing of the product and its warranty ...
something third party retrofits cannot do.
Enjoy the architecturally discreet appearance and innovative
features of the WARP9 for decades to come by deploying
Kim Lighting’s HID to LED Upgrade Kits.
house street
0-1
-2-3
1
2
3
4
3
2
1
0
1
23
45
55
21
.5house street
0-1
-2-3
1
2
3
4
3
2
1
0
1
23
4
.5
WP9L3P70/120L5K 20' Mounting Height 267.8 System Watts
WP9LE3/400PMH 20' Mounting Height 452 System Watts
10
52
1
HID TO LED COMPARISON Isofootcandle Lines of Horizontal Illumination Distance in Units of Mounting Heights
www.kimlighting.com
Because of continuing product improvement programs, Kim Lighting reserves the right to change specifications without notice. Entire contents © Copyright 2015 Kim Lighting Inc. all rights reserved. Reproduction in whole or in part without permission is strictly prohibited.