waterworks fittings - norwood foundry cast iron fittings/nf... · awwa c110-93. these fittings are...
TRANSCRIPT
® Cast Iron Tyton Fittings ANSI A21.10-93, AWWA C110-93
BENDS
90º Bend 22½º Bend 45º Bend 11¼º Bend
Nominal Diameter
90º Bend Dimensions
in. 4 6 8
10 12 14 16 18 24
mm 100 150 200 250 300 350 400 450 600
in. 6.5 8.0 9.0
11.0 12.0 14.0 15.0 16.5 22.0
in. 4.5 6.0 7.0 9.0
10.0 11.5 12.5 14.0 18.5
mm 165 203 229 279 305 356 381 419 559
mm 114 152 189 229 254 292 318 356 470
A R
in. 4 6 8
10 12 14 16 18 24
in. 4.0 5.0 5.5 6.5 7.5 7.5 8.0 8.5
11.0
in. 4.81 7.25 8.44
10.88 13.25 12.06 13.25 16.50 18.22
mm 122 184 214 276 337 306 337 419 463
R
mm 100 150 200 250 300 350 400 450 600
mm 102 127 140 165 191 191 203 216 279
A Nominal Diameter
45º Bend Dimensions
Nominal Diameter
22½º Bend Dimensions
in. 4 6 8
10 12 14 16 18 24
mm 100 150 200 250 300 350 400 450 600
in. 4.0 5.0 5.5 6.5 7.5 7.5 8.0 8.5
11.0
in. 10.06 16.06 17.62 22.62 27.62 25.12 27.62 30.19 37.69
mm 102 127 140 165 191 191 203 216 279
mm 256 383 448 575 702 638 702 767 957
A R
in. 4 6 8
10 12 14 16 18 24
in. 4.0 5.0 5.5 6.5 7.5 7.5 8.0 8.5
11.0
in. 20.31 30.50 35.50 45.69 55.81 50.75 55.81 60.99 76.12
mm 516 775 900
1160 1418 1289 1418 1548 1933
R
mm 100 150 200 250 300 350 400 450 600
mm 102 127 140 165 191 191 203 216 279
A Nominal Diameter
11¼º Bend Dimensions
A
A
A A A A A A
R
R
R
R
Norwood Foundry Limited manufactures cast iron Tyton (push-on) fittings in nominal diameters of 100mm through 600mm. Sizes 100mm to 300mm are pressure rated at 1725 kPa (250 psi), while the 350mm to 600mm are rated at 1035 kPa (150 psi). These fittings are produced in accordance with ANSI A21.10-93, AWWA C110-93. These fittings are also available in ductile iron and rated for 2413 kPa (350 psi) working pressure.
Tyton fittings are for use with PVC pipe with ductile iron pipe O.D. conforming to AWWA C900 and C905, and ductile iron pipe conforming to AWWA C151. The Tyton joint is a push-on compression joint complying with AWWA C111/ANSI A21.11. The standard Tyton gasket is SBR (Styrene-Butadiene Rubber) but other specialized gaskets such as nitrile and neoprene are available.
Tie rod lugs are integrally cast on the bells of the fittings, with two lugs standard and other combinations available by special order.
In addition to our standard Tyton fitting line, we also manufacture mixed end fittings. These are available in almost any configuration of flange, plain end, or Tyton ends. The fittings can also be made to reduce on the run.
Waterworks fittings are generally shipped coated interior and exterior with NSF61 EZ-Kote potable coating. On special order, they are also available with AWWA Standard interior and/or exterior fusion epoxy coating.
TEES, CROSSES and LATERALS
in. 4 6 6 8 8 8
10 10 10 10 12 12 12 12 12 14 14 14 14 14 16 16 16 16 16 16
in. 6.5 8.0 8.0 9.0 9.0 9.0
11.0 11.0 11.0 11.0 12.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 14.0 14.0 15.0 15.0 15.0 15.0 15.0 15.0
mm 100 100 150 100 150 200 100 150 200 250 100 150 200 250 300 150 200 250 300 350 150 200 250 300 350 400
in. 4 4 6 4 6 8 4 6 8
10 4 6 8
10 12
6 8
10 12 14
6 8
10 12 14 16
mm 100 150 150 200 200 200 250 250 250 250 300 300 300 300 300 350 350 350 350 350 400 400 400 400 400 400
Run Branch
Nominal Diameter
in. 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24
Run
mm 165 203 203 229 229 229 279 279 279 279 305 305 305 305 305 356 356 356 356 356 381 381 381 381 381 381
mm 76 89 89
114 114 114 127 127 127 127 140 140 140 140 140
mm 305 368 368 445 445 445 521 521 521 521 622 622 622 622 622
in. 3.0 3.5 3.5 4.5 4.5 4.5 5.0 5.0 5.0 5.0 5.5 5.5 5.5 5.5 5.5
in. 12.0 14.5 14.5 17.5 17.5 17.5 20.5 20.5 20.5 20.5 24.5 24.5 24.5 24.5 24.5
H and J
Dimension
N P
Dimension
mm 450 450 450 450 450 450 450 600 600 600 600 600 600 600 600
in. 6 8
10 12 14 16 18
6 8
10 12 14 16 18 24
mm 150 200 250 300 350 400 450 150 200 250 300 350 400 450 600
in. 13.0 13.0 13.0 13.0 16.5 16.5 16.5 15.0 15.0 15.0 15.0 15.0 15.0 22.0 22.0
mm 330 330 330 330 419 419 419 381 381 381 381 381 381 559 559
in. 15.5 15.5 15.5 15.5 16.5 16.5 16.5 19.0 19.0 19.0 19.0 19.0 19.0 22.0 22.0
mm 394 394 394 394 419 419 419 483 483 483 483 483 483 559 559
J Branch H
H
H
J
P
P
45
º
N
J J
H
H
H
H
J
TYTON x FLANGE ADAPTERS
PLUGS AND CAPS
Nominal Diameter
in. 4 6 8
10 12 14 16 18 24
mm 100 150 200 250 300 350 400 450 600
Dimension L
in. 8 8 8 8 8 8 8 8 8
mm 203 203 203 203 203 203 203 203 203
mm 100 150 200 250 300 350 400 450 600
mm 121 133 146 146 178 200 203 203 203
mm 65
100 100 100 100 100 100 100 100
in. 4 6 8
10 12 14 16 18 24
in. 4¾ 5¼ 5¾ 5¾
7 7⅞
8 8 8
in. 2½
4 4 4 4 4 4 4 4
Dimension L
Max. IPT Tapping
Nominal Diameter
CONCENTRIC REDUCERS
D D1 Dimension
L
Nominal Diameter
in. 6 8 8
10 10 10 12 12 12 12 14 14 14 14 16 16 16 16 16 18 18 18 18 18 24 24 24 24 24
in. 4 4 6 4 6 8 4 6 8
10 6 8
10 12
6 8
10 12 14
8 10 12 14 16 10 12 14 16 18
in. 9
11 11 12 12 12 14 14 14 14 16 16 16 16 18 18 18 18 18 19 19 19 19 19 24 24 24 24 24
mm 150 200 200 250 250 250 300 300 300 300 350 350 350 350 400 400 400 400 400 450 450 450 450 450 600 600 600 600 600
mm 100 100 150 100 150 200 100 150 200 250 150 200 250 300 150 200 250 300 350 200 250 300 350 400 250 300 350 400 450
mm 229 279 279 305 305 305 356 356 356 356 406 406 406 406 457 457 457 457 457 483 483 483 483 483 610 610 610 610 610
605 18 Avenue, Nisku, Alberta T9E 7T7
Phone: 780-955-8844
Fax: 780-955-7600
Toll Free: 800-232-7205
www.norwoodfoundry.com
L
L
L
D1
D