wcps washington county · wcps to: all prospective bidders washington county public schools...
TRANSCRIPT
WCPS
TO: All Prospective Bidders
Washington County Public Schools
Addendum No. 2
FROM: Lisa Freeman, C. P.M., Supervisor of Purchasing1£'
REF: RFP#2016-43, Media Center Furniture for Jonathan Hager Elementary School
BID DUE DATE: Wednesday, March 2, 2016 at 2:00pm local time
10435 Downsville Pike Hagerstown MD 21740
301-766-2800
February 24, 2016
All prospective bidders are advised of the following clarifications/changes to the original proposal solicitation document
issued February 4, 2016:
1. The specified shelving family Sherwood is no longer available. Replace the 2-page specification "SHERWOOD
STARTER/ADDER WOOD SHELVING By Liat Furniture" in the document with the attached pages "Specifications
Guide for Everest Shelving by Liat."
Bidders may bid the Everest by Liat shelving or any other manufacturer's shelving which generally meets the
specification.
2. Use the revised Form of Proposal for your bid submission which now reflects this change affecting Items 1- 5.
Please observe minor changes to the height of the shelving and number of shelves in the product descriptions
on the revised Form of Proposal.
3. All bidders are encouraged to submit a price option to fill-in the wall shelving on both sides of the stairwell for a
custom look.
4. The attendance sheet from the February 19, 2016 Pre-proposal Meeting is attached as information to all
prospective bidders.
Enclosed: Form of Proposal- Revised
Attendance Sheet from Pre-proposal Meeting
Record of Pre-Proposal Meeting Attendance
RFP #2016-43, Media Center Furniture for Jonathan Hager Elementary School Date/Time: Friday, February 19, 2016 at 2:30p.m. Location: Jonathan Hager Elementary School
company name
Page 1 of2
email telephone number
3ol-b7t-.J5lf7
FORM OF PROPOSAL REVISED - Bid 2016-43, Media Center Furniture for Jonathan Hager Elementary School
Group Item Room Est. Description/Specification Spec. Make/Model Bid Make/Model Room Unit Price Extended Price
No. No. Name Qty.
I 1 145 IRC 2 Starter Shelving, perimeter wall, wood, 12" D X 36" w X 72" tall Everest by Liat
w/4 adjustable picture book shelves (and base shelf) with dividers Furniture or Equal s s
I 2 145 IRC 8 Adder Shelving, perimeter wall, wood, 12" D X 36" w X 72" tall w/4 Everest by Liat
adjustable picture books shelves (and base shelf) with dividers Furniture or Equal s s
I 3 145 IRC 4 Shelving, island, double sided, wood, 12" D each side, w/divider
/center back, 36" w X 42" tall w/2 adjustable picture book shelves Everest by Liat
per side with dividers, on casters Furniture or Equal s s
I 4 145 IRC 4 Shelving, island, double sided, wood, 12" D each side,
w/divider/center back, 72" w X 42" tall w/2 adjustable picture Everest by Liat
book shelves per side, with dividers, on casters Furniture or Equal s s I 5 145 IRC 1 Everest by Liat
Shelving, wood, magazine display, 36" X 72" single faced. Furniture or Equal s s
GROUP I TOTAL: s Booktruck, flat-shelf, 3 flat shelves; holds up to 125 lb. per shelf;
II 6 145 IRC 2 18 gauge steel with 1" sq. 18-gauge steel frames; 44 1/2" X 31" X
17"; powder coated paint finishes; 5" diameter swivel casters, 2 Demeo Library Quiet
locking; variety of bright color options and quiet rolling. #P809155 s s Booktruck, 4 sloping shelves; flat top; holds up to 125 lb. per shelf;
II 7 145 IRC 1 18 gauge steel w ith 1" sq. 18-gauge steel frames; 44 1/2" X 31" X
17"; powder coated paint finishes; 5" diameter swivel casters, 2 Demeo Library Quiet
locking; variety of bright color options and quiet rolling. #P809152 s s GROUP II TOTAL: s
Curved bench; 750 lb. weight capacity; Molded polymer is
waterproof, impact-resistant, chemical-resistant and virtually
indestructible; Safe, single piece design has no sharp edges or Ill 8 145 IRC 12 corners; raised bottom allows air flow underneath to eliminate
moisture trapping;;Color is fully compounded into the material and
will not scratch or wear off; for indoor or outdoor use; Easy to
clean and disinfect; 16-1/2" x 47" x 18"
Tenjam Swerve Bench s s
1
FORM OF PROPOSAL REVISED - Bid 2016-43, Media Center Furniture for Jonathan Hager Elementary School
Ill 9 145 IRC 6
Seat; coated foam material; curved Pentagon shape; 16.5" H. Teanjam #103916 $ $
GROUP Ill TOTAL: $
IV 10 145 IRC 2 Curved bench; fully upholstered curved seat, 18" - 30" W X 24" 0 X
16.5" H; 8" brushed aluminum cylinder legs with adjustable glides;
freestanding or connected with other units in collection {Items 9 - High Point Furniture
13). Grade V upholsterey. Industries #5834 $ $
IV 11 145 IRC 2 Armless chair, upholstered seat and back; 18.5" X 24" 0 X 28.5" H;
8" brushed aluminum cylinder legs with adjustable glides;
freestanding or can be connected with other units in collection High Point Furniture
{Items 9 -13); seat is 18.5" X 16"0 X 16.5" H. Grade V upholstery. Industries #5874 $ $
IV 12 145 IRC 1 Table, connecting or freestanding; 23.5" X 23.5" X 15.5" H; thermo
fused laminate top in natural maple finish; upholstered sides;
amodized, brushed aluminum cylinder legs with adjustable glides. High Point Furniture
Coordinates with items 9- 13. Grade V upholstery. Industries #5883 $ $
IV 13 145 IRC 1 Table, oval, fully upholstered; 42.5" X 21.5" X 12.75" H; black 3/4H
cylinder non-marring floor glides. Coordinates with items 9 - 13. High Point Furniture
Grade V Upholstery. Industries #5886 $ $
Chair with back panel; 18.5" W X 26"0 X 43" H; upholstered seat
IV 14 211 Reading
4 and back; 2" thick upholstered back panel for privacy; 8" brushed
Loft aluminum cylinder legs with adjustable glides; ganged together;
seat is 18.5" X 16"0 X 16.5"H. Coordinates with items 9 -13. Grade High Point Furniture
5 Upholstery. Industries #5884 $ $
GROUP IV TOTAL: $
v 15 145 IRC 2 Gressco Pouf
Pouf, round, high density foam w/faux leather cover, color options, Seat/Ottoman or
for casual seating, Approx. 22 X 19" H; 5 year warranty. Equal $ $
2
FORM OF PROPOSAL REVISED - Bid 2016-43, Media Center Furniture for Jonathan Hager Elementary School
v 16 145 IRC 3 Gressco Pout
Pouf, round, high density foam w/faux leather cover, color options, Seat/Ottoman or
for casual seating. Approx. 22" diameter X 13" H; 5 year warranty. Equal $ $
GROUP V TOTAL: $
VI 17 145 IRC 1 Chair, task, w/arms, stool height w/foot rest for 34" H circulation Kl Intellect Wave Task
desk, grade IV fabric. Stooi-IWSA $ $ Media
VI 18 1456 Producti 2 Kl Intellect Wave-on Chair, poly, 4-leg w/casters, 18" seat height IW418C $ $
VI 19 145 IRC 16 Kllntellect Wave
Chairs, armless, 15" seat height Cantilever -IWC15 $ $ Media
VI 20 144 Class roo 15 Tables, flip top, 24 X 48" , nesting, rect.; heavy duty casters;
m locking gangers. Kl #HUN2448-64E $ $ Media
VI 21 144 Class roo 1 Tables, flip top, 24 X 48"nesting, rect., heavy duty casters; locking m gangers; with ADA kit. Kl #HUN2448-64E $ $
VI 22 211 Reading
10 Kl Intellect Wave-Loft
Chairs for Reading Loft at Teaming tables; 15" H seat; on casters. IW415C $ $ IVI~Uid
Kl Intellect Wave -VI 23 144 Class roo 32
Chairs for Media Classroom,4-leg; w/ casters, poly seat 15"H. IW415C $ $
Media
VI 24 144 Class roo 1 Kl Instruct All Terrain
m Desk for Instructor in Media Classroom; 24" X 48" X 66"W, steel, WorkZone (74P,
drawers and built in return. WZTD244866-7 4P-R) $ $ ·~~·~ Kl Intellect Wave Task
VI 25 144 Class roo 1 Chair for instructor in Media Classroom Stool $ $
GROUP VI TOTAL: $
3
FORM OF PROPOSAL REVISED - Bid 2016-43, Media Center Furniture for Jonathan Hager Elementary School
Teaming table; 4-leg 42"0; with casters, natural maple top and
aluminum base. Mount recommended for up to 42" diagonal flat
panel monitor, maximum of 40 lbs., to enable sharing of data and
information from a mobile device with up to five people. Monitor
features left and right as well as up and down swivel positioning.
VII 26 211 Reading
2 Work surface includes a Fluid Up power unit to provide easy power
Loft above the work surface to laptop, tablets, smart phones, and other
devices. Lower cord management bin may be equipped with a
power strip or Fluid Down power unit. 87.8 x 44.5 x 9.2 inches;
Item model number
EDUSDPT84C-ALMP. Bretford Explore or
Steelcase Mediascape $ $
VII 27 145 IRC 6 Stools for OPAC station, soft fabric seat, steel tubular legs, glides Bretford MoTiv Soft or
for carpet; 18- 20" H, stack for easy storage. Equal $ $
GROUP VII TOTAL: $
145B, Storage unit, on casters; lockable with 4 adjustable shelves; 20/22 VIII 28 145B 211, & 2 4 gauge steel; 12 gauge caster base; flush position to walls; three Sandusky Lee
in 144A point locking handle. Extra deep adjustable shelves; welded steel Transport Mobile
construction; powder coat finish; shipped assembled. Storage w/4 Shelves $ $
Storage unit, on casters; lockable with sectioned interior; full top
shelf and three adjustable side shelves plus bottom. Open section Media has wardrobe bar. 20/22 gauge steel, 12 gauge caster base. Sandusky Lee
VIII 29 144A 1 Storage Positions flush to wall; recessed three point locking handle. 46 " Transport Mobile
wide; welded steel construction; powder coat finish; ships Combination with
assembled. Sectionalized Interior $ $
GROUP VIII TOTAL: $ Media Table, 11/4" thick, 45 lb. board top with high pressure laminate Smith System Flex
IX 30 145B Producti 2 surface; 3/8" thick bumper edges with rounded corners; top Station #01387 &
on adjusts 24 - 32" H; 16-gauge steel frame with powder coat finish 17554 $ $
31(20 Media
IX &21 144 Class roo 16 Table, science, chemical resistant top, 24 X 48" , grey, with push Smith Systems
ALT.) m button adjustable-height leg and caster 23.5"- 29.5" H UXL2448 SC $ $
IX 32 145 IRC 4 Tables, 42 X 60" wood laminate top, steel legs, adjustable legs 23.5 Smith Systems XL4260
- 29.5" w/casters; self-edge; durable. w/SC legs $ $
4
FORM OF PROPOSAL REVISED - Bid 2016-43, Media Center Furniture for Jonathan Hager Elementary School
I I I I I I:
5
Specifications Guide General Construction Everest shelving has a modular island/starter/adder/end design , which allows for easy reconfiguration.
The standard species are Red Oak a~
Sizes Selected sizes are nominal and actual dimensions vary depending on the selected unit type. Adder and End units have a width equal to the nominal width whereas Island and Starter units having a width that is 1" larger than the nominal width, creating a run of shelving that is the selected nominal width on centers.
Top Specifications =-'7Modular Top
The modular top shall be constructed of 1" thick veneer core with grade "A" plain sliced veneer faces. The front edge shall receive a 3/4" thick x 1 3/4" high valance. The cornice frame is grooved to accept the back panel. Back rail and end cleats are machined 1 3/4" wide from solid wood. Tenon joints shall attach the end cleats to the fascia rail and back rail , then glued and pinned into a rigid structural frame and attached to the cornice panel with blind fasteners and glue. Holes are drilled in the end cleats for a bolt attachment to the end and intermediate panels. On shelving 72" and above, the fascia is above the cornice to conceal the cleats from below and a 1/4" panel is provided to conceal the cleats from above. On shelving less than 72" high, the fascia is located below the cornice top.
Add "-MT" to the model number for this option.
Continuous Tops
A B c E
Continuous tops are available for all shelving units. The catalog numbers must be called out to indicate this selection. The HPL tops shall be 1-3/16" thick and come with a 3/4" eased internal edge band. If veneer tops are ordered they shall come with a 3/4" external edge band . Edge details shall be specified at time of order and are available in the "A", "8 ", "C", and "E" profiles.
Veneer tops over 1 08" long will have seams.
HPL tops over 96" long will have seams.
Continuous tops are ordered separately from the shelving unit.
Add "-CT" to the model number for this option.
6 Everest Specification & Pricing Guide 1 Version 1.10 1 LIATfurniture.com I TF 888.440.8205 I SIN # 71 305
Shelf Specifications Adjustable Shelf (Book Case)
The adjustable shelves shall be 1" thick veneer core with grade "A" plain sl iced veneer faces. Shelves shall have an eased external band on the front edge.
The underside of the shelf shall be routed to accept the shelf pins.
Add "-BC" to the model number for this option.
Solid Shelf
The solid wood adjustable shelves shall be 3/4" thick and constructed of glued-up continuous trips of solid Red Oak or Maple that are no less than 1" and no more than 4" in width . Wood species other than Red Oak or Maple shall not be acceptable.
The underside of the shelf shall be routed to accept the shelf pins.
Add "-55" to the model number for this option.
Adjustable Divider Shelf
The adjustable shelves shall be 1" th ick veneer core with grade "A" plain sliced veneer faces. Shelves shall have an eased external band on the front edge.
The underside of the shelf shall be routed to accept the shelf pins.
There shall be a 3/4" thick x 4-3/4" high veneer core ply back rail routed and glued to the shelf to accept 1/4" thick x 7-3/8" high hardboard adjustable dividers.
Add "-AD" to the model number for this option.
Fixed Divider Shelf
The adjustable shelves shall be 1" thick veneer core with grade "A" plain sliced veneer faces. Shelves shall have an eased external band on the front edge.
The underside of the shelf shall be routed to accept the shelf pins.
There shall be a 3/4" thick x 4-3/4" high veneer core ply back rail routed and glued to the shelf. There shall be three 1/2" thick x 7-1/4" high veneer core ply dividers glued to routes in the shelf and back rail.
Add "-FD" to the model number for this option.
·..____:::; Picture Book Shelf
The adjustable shelves shall be 1" thick veneer core with grade "A" plain sl iced veneer faces. Shelves shall have an eased external band on the front edge.
The underside of the shelf shall be routed to accept the shelf pins.
The top of the shelf shall receive (5) evenly spaced black wire dividers which shall be inserted into 3/16" diameter holes.
Add "-PB" to the model number for this option.
Everest Specifi cation & Pricing Guide 1 Version 1.1 0 1 LIATfurniture.com I TF 888.440.8205 I SIN # 71 305 7
Triangular Divider Shelf
The adjustable shelves shall be 1" thick veneer core with grade "A" plain sliced veneer faces. Shelves shall have an eased external band on the front edge.
The underside of the shelf shall be routed to accept the shelf pins.
There shall be an additional route on the bottom of the shelf through the middle to accept a metal triangular divider.
Add "-TO" to the model number for this option.
~agazine Shelf
The magazine shelves shall be constructed of 1" thick veneer core with grade "A" plain sliced veneer faces. The shelf shall have a solid hardwood retaining edge to hold the magazines in their inclined, displayed position. The shelf rests on four adjustable shelf pins pivoting upward on the rear pins to access the flat "adjustable" storage shelf beneath.
Add "-MG" to the model number for this option.
Metal Shelf
The adjustable metal shelf shall be constructed of 20 gauge steel. The shelf shall be 3/4" high with the front and rear edges being square formed. The ends of the shelves shall be notched to accept the shelf pins.
The shelves shall be powder coated.
Add "-MS" to the model number for this option.
Fixed Shelf
All units 60" and higher shall require a shelf to be attached to the end and or intermediate panels by means of (4) L-shaped brackets and pan head wood screws that will align with the shelf pin holes on vertical panels.
~Panel Specifications End and Intermediate Panel
The end and intermediate panels shall be constructed 1" thick veneer core with grade "A" plain sliced veneer faces. All double-faced end panels shall be banded on two vertical edges and the top edge, when required, with an eased 1/4" solid hardwood external band. Single-faced panels are banded on the top, when required , and front edges with an eased 1/4" solid hardwood external band. The inside faces of the panels shall have two rows of holes per face bored to accept shelf pins, spaced 32mm apart on center.
The panels shall be grooved to accept a 1/4" thick back panel.
8 Everest Specification & Pricing Guide 1 Version 1.10 1 LIATfurniture.com 1 TF 888.440.8205 1 SIN# 71 305
Veneer Back Panel
The optional veneer back panel shall be 114" thick plywood with select rotary cut face veneer on exposed face(s).
Add "-VB" to the model number for this option.
Sway StrClfilS
Sway straps are required when double faced units 60" or higher are ordered with no back panels. Straps are made of 12 gauge steel and bent at angles to attach to the end and intermediate panels on a diagonal. The end units of each run shall have a strap. On runs greater than four (4) units long, every other unit in a run shall have a strap. Each strap shall be finished with a black powder coat and attached with #10 x 518" pan head wood screws.
Sway straps are only available for 36" width units.
Sway straps must be ordered separately
Filler Specifications '-----,7-r Corner Fillers
The corner fillers shall be constructed of 1" thick plywood core with a Grade "A" veneer face. Solid hardwood cleats shall be provided for attachment to the shelving run and the wall .
The depth and width is to be specified at time of purchase order.
For a proper fit, comer fillers may require trimming on installation.
Face Fillers
The face fillers shall be constructed of 1" thick plywood core with a Grade "A" veneer face. Solid hardwood cleats shall be provided for attachment to the shelving run and the wall .
The height and width is to be specified at time of purchase order.
For a proper fit, face fillers may require trimming on installation.
Base Specifications ~--:~jz-- Mobile Base
The mobile base upgrade is available on double face shelving units up to 60" high. The swivel casters shall be bolted to the underside of the shelving unit by means of four metal corner brackets.
These brackets shall provide extra bracing by having four bends and attaching to the end panels and shelving base by means of wood screws.
Add "-CA" to the model number for this option.
Everest Specification & Pricing Guide 1 Version 1.10 1 LIATfurniture.com I TF 888.440.8205 I SIN # 71 305 9
___::rsase Frames
The base frames are manufactured of solid kiln dried hardwood, the toe kick being of solid plain sawn Red Oak or Maple. The toe kick shall be full height at 31/4" . The back rail and two end cleats shall be 1 3/4" high. The end cleats are tenoned into the toe kick and back rail and glued and pinned into a rigid structural frame assembly. Holes are positioned into the end cleats for bolt attachment to the end and intermediate panels. A groove in the back rai l shall house the back panels.
The end cleats on a double face shelving unit shall receive the groove to capture the back panel.
Overall Size Specifications Height
See specific sections for available heights.
Height selection may vary from the actual overall footprint height.
Depth
See specific sections for available depths.
Depth selection may vary from the actual overall footprint depth.
Width
See specific sections for available widths.
Width selection may vary from the actual overall footprint width.
Each island and starter is 37" wide and each adder and end is 36" wide. This creates a run of shelving units that is 36" wide on centers.
height
10 Everest Specification & Pricing Guide 1 Version 1.10 1 LIATfurniture.com I TF 888.440.8205 I SIN # 71 305