WE HELPEXCEED OSHASTANDARDS,INCREASE PRODUCTIVITY,BURNISH DUST FREE.YOU SHINE.

Smarter Floor Care SolutionSFast • Clean • Reliable PRoPane PoweRed buRnisheRs

We HelpMeeT leeDReQUIReMeNTS,INCReASe pRODUCTIVITY,elIMINATe DUST.YOU SHINe.

ONYX

Blue Sky™ 42” Dual HeaD BurnisHerBLUE SKY G2 27” PROPANE BURNISHER

Onyx has a long-standing commitment to providing the highest quality equipment and the best customer service in the industry. All of our products are designed and manufactured in the U.S. with the end user in mind. Our network of professional floor care consultants have more than 160 years of experience in the industry, and can answer questions about any floor care situation and recommend types of products, pads, chemicals to use.

137 Cross Center Rd, Suite 246 • Denver, NC 28037 800-858-3533 • 704-827-9368 • Fax 704-820-2892

onyxsolutions.com ONYX

BLUE SKY G2 PROPANE BURNISHER Onyx Blue Sky G2 27” model burnishes an amazing 27,000 sq ft per hour while delivering a superior “wet look floor” while eliminating dust. You can significantly reduce labor cost and time spend on the job. Blue Sky G2 has been completely redesigned to produce even better results. Blue Sky G2 models sit 20% lower to the floor allowing for more burnishing underneath low shelves. The new G2 HDPE dust control skirt provides even floating on the most uneven floors and can be easily installed and removed in seconds with no tools required. In addition, Blue Sky G2 propane engines have been specifically tuned to provide lower noise levels and increased fuel economy.

UNIQUE BENEFITSA low profile deck with patented bumper skirting makes it easy to burnish under counters and around obstructions. These “low torque” burnishers allows for greater maneuverability and reduce operator fatigue. The unique tilt back deck design allows for quick pad changes. Our high RPM burnishing speeds deliver superior wet look shine in significantly less time than conventional plug in electric machines. A 360° floating pad assembly assures full contact on uneven floors.

RELIABILITY, LONGEVITYOur powerful Kawasaki 18 HP 603cc engine is built to run cleaner andoptimally, extending engine life to twice that of other types of engines. G2 engine tuning has also allowed for even lower noise levels while increasing fuel economy. The EnviroGard emissions monitoring system and catalytic mufflers lower CO, HC and NOx emissions. Engine service intervals are significantly reduced, lowering maintenance cost. Our burnishers are CE, CARB and EPA certified.

ENVIRONMENTALLY FRIENDLYThe powerful engine is both EPA and CARB certified and features an emissions monitor that shuts down the engine if CO levels rise. Blue Sky G2™ burnishers meet GS-42 and LEED standards and exceed OSHA standards for indoor operation. A three-way catalytic muffler lowers CO, HC and NOx emissions.

SUPERIOR DUST CONTROLBlue Sky’s four-stage dust containment system utilizes a vacuum motor and patented dust control system and skirting to capture dust in a reusable microfilter bag. Our Blue Sky G2™ vacuum system captures up to 80% of dust particles, keeping your customer environments cleaner and reducing or eliminating the need for dust mopping.

SPECIFICATIONS Frame POWDER COATED CAST ALUMNIUM ALLOY

Ignition 12 VOLT BATTERY STARTER

Engine 603CC 18HP KAWASAKI ENVIROGARD PROPANE FUEL SYSTEM

EPA, CARB, CE CERTIFIED

Dust Control TWO STAGE SYSTEM CONTAINS AND CAPTURES DUST DOWN TO 1 MICRON

Skirt G2 HDPE SKIRT IS NON MARKING, EASY TO INSTALL AND REMOVE WITH NO TOOLS

Pad Driver CONCAVED WITH BIG MOUTH CENTER LOCK AND HARPOON HOOK GRIP FACE

Burnishing 27” (68.58cm)

Width (Pad Size)

Performance 34,000 (sq ft/hour)

3,158 (sq m/hour)

Width 29” (73.67cm)

Length 53” (134.64cm)

Height 40” (101.61cm)

Weight 230lbs (104.33kg)

Shipping Weight 270lbs (122.47kg)

Warranty 3 year on engine, 1 year on machine, 90 days wearable parts