wear debris analysis ashwin thottumkara full ppt
TRANSCRIPT
![Page 1: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/1.jpg)
04/08/2023 1
WEAR DEBRIS ANALYSIS
![Page 2: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/2.jpg)
04/08/2023 2
INTRODUCTION Wear of sliding components result in reduced
mechanical efficiency.
Lubrication is provided between the moving surface to minimize the wear.
Wear Debris Analysis has proven useful in providing supporting evidence on the bearing or gear status.
It also provides information on the wear mechanism, which is involved.
![Page 3: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/3.jpg)
04/08/2023 3
USED OIL CONTAMINATION – TIME TRENDS
![Page 4: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/4.jpg)
04/08/2023 4
when the machinery is now or recently overheated, a sharp rise in metallic concentration occurs from A to B .
Once this phase is completed, the concentration should remain steady, the oil shouls then be changed. Some residual wear metal products remain from the old oil and circulate in the original oil following the oil change at c.
Normal functioning the metallic concentration would be expected to increase slowly as by C-D
If abnormal conditions arise, the concentration may increase by D-E.
![Page 5: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/5.jpg)
04/08/2023 5
WEAR PROCESS MONITORING TECHNIQUES
![Page 6: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/6.jpg)
04/08/2023 6
Direct Debris Collection Method Wear debris in the lubricant is detected
in the machine by arranging for the oil flow through a device, which is sensitive to the presence of debris.
Two types of filter system are mainly present
Special filters
Existing Filter system
![Page 7: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/7.jpg)
04/08/2023 7
Debris Collection Method
Wear debris is collected in a device, fitted to the machine which is convenient to remove, so that the debris can be extracted for examination.
![Page 8: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/8.jpg)
04/08/2023 8
Magnetic Plugs
![Page 9: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/9.jpg)
04/08/2023 9
It is an “on-line” control method, magnetic plugs are used in oil-lubricated machines
This method only detect ferrous material.
The magnetic plugs captures a large number of particles are
detected ,which would not normally be recorded by means of ferrography.
An unacceptable coating is visible. This indicates abnormal wear.
Magnetic plugs are used in the modern aircraft engines where particle sizes are in the order of 0.2-1 µm are found.
![Page 10: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/10.jpg)
04/08/2023 10
An unacceptable coating can be characterized by the following conditions.
Large individual fragments
Pieces which can be identified as flakes from a bearing
Flat fragments
A large number of whiskers
Particularly long whiskers
![Page 11: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/11.jpg)
04/08/2023 11
Lubricant Sample Analysis A sample of lubricant is extracted from a machine
and analyzed for wear debris contamination.
There are two most widely used methods
1. Spectrometric oil analysis program (SOAP)
2. Ferrography
![Page 12: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/12.jpg)
04/08/2023 12
Spectrometric oil analysis program (SOAP)
It is a maintenance tool which is used to
check the condition of the oil lubricated mechanical systems(Examples: Motors, Gear boxes, Hydraulic systems).
The quantity can indicate something about the magnitude of the wear and the type of wear metals can reveal which component is wearing out.
The quantity and type of wear metals in sample of lubricating oil is determined
![Page 13: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/13.jpg)
04/08/2023 13
Emission spectroscopy It is an optical instrument
The sample is burnt in between two electrodes
It produces a light of different wavelengths
The intensity of light is proportional to the
concentration of the metal in the sample.
![Page 14: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/14.jpg)
04/08/2023 14
Atomic absorption spectroscopy
![Page 15: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/15.jpg)
04/08/2023 15
Limitations of soap
Large particles (E.g. bearings can breakdown due to few large particles)
Defects which occurs quickly (E.g. due to the lack of lubricating oil or due to bearings which burn up)
Defects where no wear metals are formed.(E.g. breakdown due to metal fatigue).
![Page 16: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/16.jpg)
04/08/2023 16
Application of soap
1. It is used in situations where breakdowns are expensive.
2. It is widely used in the military services.
3. In US, it is used by the Air force, Navy and the Army.
4. It is used for many civil aviation companies.
![Page 17: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/17.jpg)
04/08/2023 17
Ferrography
It is a technique which is based upon the systematic collection of oil samples from an oil- lubricant.
The method identifies, isolate and classify wear particles from machine parts. A magnetic field is used to sort the wear particles in the flowing oil.
This technique was used successfully to monitor the condition of military aircraft engines, gear boxes and transmissions.
![Page 18: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/18.jpg)
04/08/2023 18
Type of equipments used in wear particle analysis
Direct –Reading(DR) ferrography
Analytical ferrograph system
Ferrorgram scanner.
![Page 19: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/19.jpg)
04/08/2023 19
1. Direct – Reading (DR) Ferrography
![Page 20: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/20.jpg)
04/08/2023 20
![Page 21: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/21.jpg)
04/08/2023 21
2. The Analytical Ferrograph
. The Analytical Ferrograph is used to prepare a Ferrogram -- a fixed slide of wear particles for microscopic examination and photographic doc.
The Ferrogram is an important predictive tool.
![Page 22: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/22.jpg)
04/08/2023 22
![Page 23: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/23.jpg)
04/08/2023 23
3. Ferrorgram scanner.
The energy-dispersive (X-ray) spectrometry (EDS) technique is a familiar elemental analysis attachment to a scanning electron microscope (SEM) where electrons are used as the primary energy source to excite the X-ray spectra.
![Page 24: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/24.jpg)
04/08/2023 24
SEM
![Page 25: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/25.jpg)
04/08/2023 25
CONCLUSION
The wear debris monitoring method access the nature of the particles generated when components wear. They can
indicate exact nature of the machine problemindicate the amount of debris present indicate the size distribution of debris indicate the physical form of debris application of chemical analysis of debris
![Page 26: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/26.jpg)
04/08/2023 26
REFERENCES:1. VENKATRAMAN.A, SENTHILVELAN.T,
“WINTER SCHOOL ON RECENT TRENDS IN DIAGNOSTIC MAINTENANCE”.
2. PRABHU.B.S, “WORKSHOP ON PLANT ENGGINEERING AND INDUSTRIAL TRIBOLOGY”.
3. www.wikipedia.org
4. www.encyclopedia.com
![Page 27: Wear Debris Analysis ASHWIN THOTTUMKARA FULL PPT](https://reader033.vdocuments.net/reader033/viewer/2022050720/5469e857af7959593e8b4a5a/html5/thumbnails/27.jpg)
04/08/2023 27
Thank you