· web viewsection 08 52 00.10. wood and aluminum-clad-wood windows and patio doors. jeld-wen...

SECTION 08 52 00.10WOOD AND ALUMINUM-CLAD-WOOD WINDOWS AND PATIO DOORS

JELD-WEN Custom Epic Series

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2016 - 2017 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Clad Wood Windows and Patio Doors:1. Awning windows.2. Casement.3. Double-hung windows.4. Fixed Double-hung windows.5. Fixed Casement windows.6. Insash Casement/Awning Radius and geometric windows.7. In-swing patio doors.8. Out-swing patio doors.

B. Wood Windows and Patio Doors:1. Awning windows.2. Casement.3. Double-hung windows.4. Radius and geometric windows.5. In-swing patio doors.6. Out-swing patio doors.

1.2 REFERENCES

A. Window and Door Manufacturers Association (WDMA):1. AAMA/WDMA/CSA 101/I.S.2/A440 North American Fenestration Standard /

Specification for windows, doors, and skylights (NAFS).2. WDMA I.S.4; Industry Specification for Preservative Treatment for Millwork.

B. ASTM International (ASTM):1. ASTM E 1886 - Standard Test Method for Performance of Exterior Windows, Curtain

Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials.

2. ASTM E 1996 - Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes.

C. National Fenestration Rating Council (NFRC):1. NFRC 100 - Procedure for Determining Fenestration Product U-Factors.2. NFRC 200 - Procedure for Determining Fenestration Product Solar Heat Gain

Coefficient and Visible Transmittance at Normal Incidence.

D. South Florida Building Code Impact Test Procedures (Miami-Dade TAS):1. TAS 201 - Impact Test Procedures.

08 52 00.10-1

2. TAS 202 - Criteria for testing Impact and Non-Impact Resistant Building Envelope Components using Uniform Static Air Pressure.

3. TAS 203 - Criteria for testing Products Subject to Cyclic Wind Pressure Loading.

1.3 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

C. Shop Drawings: Submit shop drawings indicating details of construction, flashings and relationship with adjacent construction.

D. Selection Samples: For each factory-finished product specified, two complete sets of color chips representing manufacturer's full range of available finishes.

E. Verification Samples: For each factory-finished product specified, two samples, minimum size 6 inches (150 mm) square, representing actual finishes.

F. Quality Assurance Submittals:1. Design Data, Test Reports: Provide manufacturer test reports indicating product

compliance with indicated requirements.2. WDMA Hallmark certification.

G. Closeout Submittals: Refer to Section 01 70 00 - Execution and Closeout Requirements.

1.4 QUALITY ASSURANCE

A. Installer Qualifications: Minimum __ years installing similar assemblies.

B. Certifications: WDMA Hallmark certification label indicating assemblies meet the design requirements.

C. Mock-Up: Provide a mock-up for evaluation of installation techniques and workmanship.1. Mock-ups shall incorporate surrounding construction, including wall assembly

fasteners, flashing, and other related accessories installed in accordance with manufacturer's approved installation methods.

2. Do not proceed with remaining work until workmanship is approved by Architect.3. Modify mock-up as required to produce acceptable work.4. At Substantial Completion, approved mockups may become part of completed Work.5. Demolish mockups and remove from site.

D. Pre-installation Meeting: Conduct pre-installation meeting on-site two weeks prior to commencement of installation.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.

B. Deliver and store assembly materials and components in manufacturer's original, unopened, undamaged containers with identification labels intact. Protect from damage.

1.6 PROJECT CONDITIONS

08 52 00.10-2

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.7 WARRANTY

A. Manufacturer's Standard Warranty: Assemblies will be free from defects in materials and workmanship from the date of manufacture for the time periods indicated below:1. Basic Product Coverage - Patio Door Units: 20 years.2. Basic Product Coverage - Window Units: 20 years.3. Clad Finishes: 20 years against peeling, checking, cracking caulk or color change.4. AuraLast Protection for Wood Products:

a. Owner-Occupied Single-Family Residence: as long as you own and occupy your residence.

b. Commercial: 20 years.c. Coverage is for wood decay and/or termite damage in pine wood components.

5. Glazing:a. Insulated Glass: 20 years.b. Laminated Glass: 5 years.c. Hurricane Glass: 5 years.d. Specialty Glazing: 5 years.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: JELD-WEN, Inc., which is located at: 2645 Silver Crescent Dr.; Charlotte, NC 28273 ; Toll Free Tel: 800-535-3936; Tel: 541-850-2606; Fax: 541-851-4333; Email:request info ([email protected]); Web:http://www.jeld-wen.com/en-us

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 ALUMINUM-CLAD WINDOWS AND PATIO DOORS - GENERAL

A. Design Requirements:1. Compliance: Provide assemblies capable of complying with requirements indicated,

based on testing manufacturer's patio doors that are representative of those specified.2. Test Size: In compliance with requirements of AAMA/WDMA/CSA 101/ I.S.2/A440.3. Structural Requirements: Provide assemblies complying with requirements indicated:

a. Design Pressure Rating; Patio Doors: ________.b. Design Pressure Rating; Patio Doors: As indicated on the Drawings.c. Design Pressure Rating; Windows: ________.d. Design Pressure Rating; Windows: As indicated on the Drawings.e. Performance Class: As indicated on drawings.f. Performance Class: ________.g. Performance Grade: As indicated on drawings.h. Performance Grade: ________.

4. Impact (Windborne-Debris) Resistance:a. Provide windows and patio doors capable of resisting impact from windborne

debris, when tested in accordance with ASTM E 1886, ASTM E 1996.b. Provide windows and patio doors that have been tested in accordance with

TAS 201, TAS 202, and TAS 203.5. NFRC Requirements: Provide assemblies complying with the following total window

08 52 00.10-3

ratings:a. U-Factor: ________ in accordance with NFRC 100.b. Solar Heat Gain Coefficient (SHGC): ________ in accordance with NFRC 200.c. Visible Transmittance (VT): ________ in accordance with NFRC 200.

B. Materials:1. Exterior Cladding: Extruded Aluminum.2. Interior Wood:

a. Material: As selected by Architect.b. Material: AuraLast Pine; Standard.c. Material: Knotty Alder.d. Material: Mahogany.e. Material: Vertical Grain Douglas Fir.f. Material: Reclaimed Fir.g. Material: Red Oak.h. Material: Walnut.i. Material: White Oak.j. Material: Alder.

C. Installation Accessories:1. Flashing: Refer to Section 07 60 00 - Flashing and Sheet Metal.2. Sealants: OSI Sealants by Henkel Corporation.3. Sealants: Refer to Section 07 92 00 (07920) - Joint Sealants.4. Sealants: Provide manufacturer recommended sealants maintain watertight

conditions.

D. Interior Finishes for Windows:1. Finish: Natural; Standard.2. Finish: Primed.3. Finish: Pre-finished paint.

a. Color: As selected by Architect.b. Color: Brilliant White.c. Color: Desert Sand.d. Color: Ivory.e. Color: Black.f. Color: Dove.g. Color: Gunmetal.h. Color: Black Frame and Brilliant White Sash.i. Color: Brilliant White Frame and Black Sash.

4. Finish: Pre-finished stain finish.a. Color: As selected by Architect.b. Color: Cordovan.c. Color: Fruitwood.d. Color: Walnut.e. Color: Americano.f. Color: Charcoal.g. Color: Kodiak.

5. Finish: Pre-finished clear lacquer finish.

E. Exterior Finishes for Windows:1. Finish: AAMA 2605 PVDF.

a. Color: As selected by Architect.b. Color: Brilliant White.c. Color: Desert Sand.d. Color: Chestnut Bronze.e. Color: Black.

08 52 00.10-4

f. Color: French Vanilla.g. Color: Hartford Green.h. Color: Mesa Red.i. Color: Silver.j. Color: Steele Gray.k. Color: Dark Chocolate.l. Color: Hunter Green.m. Color: Heirloom White.n. Color: Smoke.o. Color: Bone White.p. Color: Ivory.q. Color: Luxury Bronze.r. Color: Mocha Cream.s. Color: Sea Foam.t. Color: Stone.u. Color: Flagstone.v. Color: Cocoa.w. Color: Cranberry.x. Color: Surf.y. Color: Moss.z. Color: Stormy.aa. Color: Admiral.bb. Color: Navy.

F. Interior Finishes for Patio Doors:1. Finish: Natural; Standard.2. Finish: Primed.3. Finish: Pre-finished paint.

a. Color: As selected by Architect.b. Color: Brilliant White.c. Color: Desert Sand.d. Color: Ivory.e. Color: Black.f. Color: Dove.g. Color: Gunmetal.h. Color: Black Frame and Brilliant White Sash.i. Color: Brilliant White Frame and Black Sash.

4. Finish: Pre-finished stain finish.a. Color: As selected by Architect.b. Color: Cordovan.c. Color: Fruitwood.d. Color: Walnute. Color: Americano.f. Color: Charcoal.g. Color: Kodiak.


G. Exterior Finishes for Patio Doors:1. Finish: AAMA 2605 PVDF.

a. Color: As selected by Architect.b. Color: Brilliant White.c. Color: Desert Sand.d. Color: Chestnut Bronze.e. Color: Black.f. Color: French Vanilla.g. Color: Hartford Green.

08 52 00.10-5

h. Color: Mesa Red.i. Color: Silver.j. Color: Steele Gray.k. Color: Dark Chocolate.l. Color: Hunter Green.m. Color: Heirloom White.n. Color: Smoke.o. Color: Bone White.p. Color: Ivory.q. Color: Luxury Bronze.r. Color: Mocha Cream.s. Color: Sea Foam.t. Color: Stone.u. Color: Flagstone.v. Color: Cocoa.w. Color: Cranberry.x. Color: Surf.y. Color: Moss.z. Color: Stormy.aa. Color: Admiral.bb. Color: Navy.

2.3 ALUMINUM-CLAD WINDOW ASSEMBLlES

A. Basis of Design: Custom EPIC Series window assemblies as manufactured by JELD-WEN, Inc.

B. Window Fabrication:1. Awning windows.

a. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with

interior applied profiled wood stops.1) Glazing Bead: Traditional Beveled.2) Glazing Bead: Contemporary Square.

2. Casement windows.a. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with


3. Double-hung windows.a. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with


4. Fixed Casement/Awning:a. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with


08 52 00.10-6

5. Fixed Double-Hunga. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with

interior applied profiled wood stops.1) Glazing Bead: Traditional Beveled.2) Glazing Bead: Contemporary Square.3) Glazing Bead: Flush.

6. Insash Radius and geometric Casement/Awning windows.a. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with


C. Frames:1. Material: Select kiln-dried pine AuraLast treated wood.2. Casement, Awning and Picture Windows Base Frame: 3-3/8 inches (85.7 mm).3. Double-Hung Window Base Frame: 5-9/16 inches (141 mm).4. Cladding: 0.050 inch (1.27mm) extruded aluminum.

D. Sash:1. Material: Select kiln-dried pine AuraLast treated wood.2. Cladding: 0.019 inch (0.438 mm) Roll-Formed Aluminum.3. Cladding: 0.060 inch (1.5 mm) Extruded Aluminum.4. Sash Thickness: Double-Hung Windows. 1-3/4 inches (44 mm).

E. Exterior Trim:1. Casing: As selected from Manufacturer's standard offering.2. Casing: Nail Fin; Standard.3. Casing: Nail Flange.4. Casing: No Drip Cap/No Nail Fin.5. Casing: Brickmould.6. Casing: Adams Casing.7. Casing: 3-1/2 inch (88.9 mm) Flat Casing.8. Casing: 2 inch (50.8 mm) Flat Casing.9. Casing: Manchester Casing.10. Casing: No Exterior Trim.11. Casing: Aluminum Pendleton Casing.12. Casing: Aluminum Kenison Casing.13. Sill Nosing: Sill Nose, 19/32 inch (15.1 mm); Standard.14. Sill Nosing: Extended Sill Nose, 2-1/16 inch (52.4 mm).15. Sill Horns: No Sill Horn; Standard.16. Sill Horns: Extended Sill Horns.

F. Factory Applied Extension Jambs: Provide on four sides of frame interior 5/4 up to 7-1/2 inches (190.5 mm).

G. Weatherstripping: Foam lined jamb liners forming a compression seal against sash stiles, dual durometer bulb seal between top and bottom rails of sash and frame, and bulb seal between top rail and header, and between sash meeting rails.

H. Window Hardware:1. Awning Windows:

a. Hinges: Sliding steel reinforced nylon shoe in stainless steel track.b. Operator: Single pull scissor arm with track; Standard.

08 52 00.10-7

c. Operator: Dual pull scissor arm with bracketd. Operator/Hinge Finish: Stainless Steel; Standard.e. Handle Profile: Nesting Crank Handle; Standard.

1) Finish: As selected by architect2) Finish: White; Standard.3) Finish: Desert Sand.4) Finish: Chestnut Bronze.5) Finish: Polished Brass.6) Finish: Antique Brass.7) Finish: Brushed Chrome.8) Finish: Polished Chrome.9) Finish: Authentic Oil-Rubbed Bronze.10) Finish: Gloss Black.11) Finish: Matte Black.12) Finish: Satin Nickel.

f. Handle Profile: Round Handle.1) Finish: As selected by architect2) Finish: White; Standard.3) Finish: Desert Sand.4) Finish: Chestnut Bronze.5) Finish: Polished Brass.6) Finish: Antique Brass.7) Finish: Brushed Chrome.8) Finish: Polished Chrome.9) Finish: Authentic Oil-Rubbed Bronze.10) Finish: Gloss Black.11) Finish: Satin Nickel.

g. Handle Profile: No Handle.2. Casement Windows:

a. Hinges: Sliding steel reinforced nylon shoe in stainless steel track; Standard.b. Hinges: Butt Hinge, Single Arm Operator.c. Hinges: Egress Hinge.d. Operator: Single pull scissor arm with track; Standard.e. Operator: Dual pull scissor arm with bracket.f. Operator/Hinge Finish: Stainless Steel.g. Handle Profile: Nesting Crank Handle; Standard.


h. Handle Profile: Round Handle.1) Finish: As selected by architect2) Finish: White; Standard.3) Finish: Desert Sand.4) Finish: Chestnut Bronze.5) Finish: Polished Brass.6) Finish: Antique Brass.7) Finish: Brushed Chrome.

08 52 00.10-8

8) Finish: Polished Chrome.9) Finish: Authentic Oil-Rubbed Bronze.10) Finish: Gloss Black.11) Finish: Satin Nickel.

i. Handle Profile: No Handle.3. Double-Hung Windows:

a. Balance: Compression type block and tackle.b. Lock: Cam Locks; Standard.


c. Lock: Keyed Cam Locks.1) Finish: As selected by architect2) Finish: White; Standard.3) Finish: Chestnut Bronze.

d. Finger Lifts: No Finger Lifts.e. Finger Lifts: With Finger Lifts.f. Sash retainer: Recessed top and bottom.g. Jamb Liner Finish: Beige.h. Jamb Liner Finish: White.

4. Fixed Windows: None.

I. Glazing for Windows:1. Glazing Type: Insulated glass.

a. Description: Two panes of glass utilizing continuous roll formed stainless steel spacer and dual seal sealants.

b. Strength: Annealed; Standard.c. Strength: Tempered; meets CA Urban Fire Code.d. Strength: Tempered In/Annealed Out; meets CA Urban Fire Code.e. Overall Nominal Thickness: 3/4 inch (19 mm).f. Glass Coating: As selected by Architect.g. Glass Coating: Low-E 366; Standard.h. Glass Coating: Low-E.i. Glass Coating: Low-E 180.j. Glass Coating: Low-E EC.k. Glass Coating: Low-E EC 366; i89 in/366 Out.l. Glass Protection: Plastic preserve film on interior and exterior of glass.m. Air Space: Argon; Standard.n. Air Space: High Altitude; above 4000 ft (1219.2 m) elevation.

2. Glazing Type: Triple Glazing.a. Description: Three panes of glass utilizing continuous roll formed stainless steel

spacer and dual seal sealants.b. Strength: Annealed; Standard.c. Strength: Tempered; meets CA Urban Fire Code.d. Overall Nominal Thickness: 1-1/4 inches (31.75 mm).e. Glass Coating: As selected by Architect.f. Glass Coating: Low-E; Standard.

08 52 00.10-9

g. Glass Coating: Dual Low-E; 270 Out/180 In.h. Glass Coating: Dual Low-E 180.i. Air Space: Argon; Standard.j. Air Space: High Altitude; above 4000 ft (1219.2 m) elevation.

J. Exterior Insect Screens:1. Material: Black UltraVue fiberglass screen cloth (19 x 19 mesh) set in a painted roll

formed aluminum framea. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: Black.f. Finish: French Vanilla.g. Finish: Hartford Green.h. Finish: Mesa Red.i. Finish: Silver.j. Finish: Steele Gray.k. Finish: Dark Chocolate.l. Finish: Hunter Green.m. Finish: Heirloom White.n. Finish: Smoke.o. Finish: Bone White.p. Finish: Ivory.q. Finish: Luxury Bronze.r. Finish: Mocha Cream.s. Finish: Sea Foam.t. Finish: Stone.u. Finish: Flagstone.v. Finish: Cocoa.w. Finish: Cranberry.x. Finish: Surf.y. Finish: Moss.z. Finish: Stormy.aa. Finish: Admiral.bb. Finish: Navy.

2. Material: Charcoal aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame; Standard.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: Black.f. Finish: French Vanilla.g. Finish: Hartford Green.h. Finish: Mesa Red.i. Finish: Silver.j. Finish: Steele Gray.k. Finish: Dark Chocolate.l. Finish: Hunter Green.m. Finish: Heirloom White.n. Finish: Smoke.o. Finish: Bone White.p. Finish: Ivory.q. Finish: Luxury Bronze.r. Finish: Mocha Cream.

08 52 00.10-10

s. Finish: Sea Foam.t. Finish: Stone.u. Finish: Flagstone.v. Finish: Cocoa.w. Finish: Cranberry.x. Finish: Surf.y. Finish: Moss.z. Finish: Stormy.aa. Finish: Admiral.bb. Finish: Navy.

3. Material: Silver Aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: Black.f. Finish: French Vanilla.g. Finish: Hartford Green.h. Finish: Mesa Red.i. Finish: Silver.j. Finish: Steele Gray.k. Finish: Dark Chocolate.l. Finish: Hunter Green.m. Finish: Heirloom White.n. Finish: Smoke.o. Finish: Bone White.p. Finish: Ivory.q. Finish: Luxury Bronze.r. Finish: Mocha Cream.s. Finish: Sea Foam.t. Finish: Stone.u. Finish: Flagstone.v. Finish: Cocoa.w. Finish: Cranberry.x. Finish: Surf.y. Finish: Moss.z. Finish: Stormy.aa. Finish: Admiral.bb. Finish: Navy.

4. Material: Bronze Aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: Black.f. Finish: French Vanilla.g. Finish: Hartford Green.h. Finish: Mesa Red.i. Finish: Silver.j. Finish: Steele Gray.k. Finish: Dark Chocolate.l. Finish: Hunter Green.m. Finish: Heirloom White.n. Finish: Smoke.

08 52 00.10-11

o. Finish: Bone White.p. Finish: Ivory.q. Finish: Luxury Bronze.r. Finish: Mocha Cream.s. Finish: Sea Foam.t. Finish: Stone.u. Finish: Flagstone.v. Finish: Cocoa.w. Finish: Cranberry.x. Finish: Surf.y. Finish: Moss.z. Finish: Stormy.aa. Finish: Admiral.bb. Finish: Navy.

K. Interior Insect Screens:1. Material: Black UltraVue fiberglass screen cloth (19 x 19 mesh) set in a painted roll

formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Silver.g. Finish: Steele Gray.h. Finish: Dark Chocolate.i. Finish: Black.

2. Material: Black UltraVue fiberglass screen cloth (19 x 19 mesh) set in a wood veneer roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Pine.c. Finish: Knotty Alder.d. Finish: Mahogany.e. Finish: Vertical Grain Douglas Fir.f. Finish: Reclaimed Fir.g. Finish: Red Oak.h. Finish: Walnut.i. Finish: Cherry.j. Finish: White Oak.k. Finish: Alder.

3. Material: Charcoal aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame; Standard.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Silver.g. Finish: Steele Gray.h. Finish: Dark Chocolate.i. Finish: Black.

4. Material: Silver aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.

08 52 00.10-12

d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Silver.g. Finish: Steele Gray.h. Finish: Dark Chocolate.i. Finish: Black.

5. Material: Bronze aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Silver.g. Finish: Steele Gray.h. Finish: Dark Chocolate.i. Finish: Black.

6. Material: Charcoal aluminum screen cloth (18 by 16 mesh) set in wood veneer roll formed aluminum frame; Standard.a. Finish: As selected by Architect.b. Finish: Pine.c. Finish: Knotty Alder.d. Finish: Mahogany.e. Finish: Vertical Grain Douglas Fir.f. Finish: Reclaimed Fir.g. Finish: Red Oak.h. Finish: Walnut.i. Finish: Cherry.j. Finish: White Oak.k. Finish: Alder.

7. Material: Silver aluminum screen cloth (18 by 16 mesh) set in wood veneer roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Pine.c. Finish: Knotty Alder.d. Finish: Mahogany.e. Finish: Vertical Grain Douglas Fir.f. Finish: Reclaimed Fir.g. Finish: Red Oak.h. Finish: Walnut.i. Finish: Cherry.j. Finish: White Oak.k. Finish: Alder.

8. Material: Bronze aluminum screen cloth (18 by 16 mesh) set in wood veneer roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Pine.c. Finish: Knotty Alder.d. Finish: Mahogany.e. Finish: Vertical Grain Douglas Fir.f. Finish: Reclaimed Fir.g. Finish: Red Oak.h. Finish: Walnut.i. Finish: Cherry.j. Finish: White Oak.k. Finish: Alder.

08 52 00.10-13

L. Grilles:1. Type: Simulated Divided Lites (SDL).

a. Exterior Muntins:1) Material: Extruded aluminum permanently applied to exterior of insulating

glass unit.2) Profiles: Beaded.

a) Width: 5/8 inch (15.9 mm)b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inch (28.5 mm).d) Width: 1-3/8 inch (34.9 mm).e) Width: 2-5/16 inch (58.7 mm).

3) Profiles: Putty.a) Width: 5/8 inch (15.9 mm)b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inch (28.5 mm).d) Width: 1-3/8 inch (34.9 mm).e) Width: 2-5/16 inch (58.7 mm).

4) Profiles: Contemporary.a) Width: 5/8 inch (15.9 mm)b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inch (28.5 mm).d) Width: 1-3/8 inch (34.9 mm).e) Width: 2-5/16 inch (58.7 mm).

5) Pattern: As scheduled and indicated on Drawings.a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: Black.f) Finish: French Vanilla.g) Finish: Hartford Green.h) Finish: Mesa Red.i) Finish: Silver.j) Finish: Steele Gray.k) Finish: Dark Chocolate.l) Finish: Hunter Green.m) Finish: Heirloom White.n) Finish: Smoke.o) Finish: Bone White.p) Finish: Ivory.q) Finish: Luxury Bronze.r) Finish: Mocha Cream.s) Finish: Sea Foam.t) Finish: Stone.u) Finish: Flagstone.v) Finish: Cocoa.w) Finish: Cranberry.x) Finish: Surf.y) Finish: Moss.z) Finish: Stormy.aa) Finish: Admiral.bb) Finish: Navy.

b. Internal Shadow Bar:1) Finish: Light Bronze finish; Standard.2) Finish: Silver finish.

c. Internal Spacer Bar:

08 52 00.10-14

1) Finish: Black; Standard.2) Finish: Silver.3) Finish: Gray.

d. Interior Muntins:1) Material: Clear pine permanently bonded to interior of insulating glass

unit.2) Profile: Traditional Bar; Standard.3) Profile: High Profile Bead.4) Profile: Contemporary.5) Profile: Putty.

2. Type: Full Surround Wood Grilles.a. Material: Unfinished clear pine.b. Profile: Modified OGEE.c. Pattern: As scheduled and indicated on Drawings.d. Width: 7/8 inch (22 mm).e. Width: 1-1/8 inches (28.5 mm).f. Width: 1-3/8 inches (34.9 mm).

3. Type: Grilles Between the Glass (GBG).a. Material: Made of roll formed aluminum suspended within the air cavity.b. Profile: Flat.

1) Width: 5/8 inch (15.9 mm).a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Dark Chocolate.i) Finish: Black.

c. Profile: Contour.1) Width: 23/32 inch (18.25 mm).

a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Black.i) Finish: White Ext./Desert Sand Int.j) Finish: Desert Sand Ext./White Int.k) Finish: White Ext./Chestnut Bronze Int.l) Finish: Chestnut Bronze Ext./White Int.m) Finish: White Ext./Black Int.n) Finish: Black Ext./White Int.o) Finish: White Ext./French Vanilla Int.p) Finish: French Vanilla Ext./White Int.q) Finish: White Ext./Hartford Green Int.r) Finish: Hartford Green Ext./White Int.s) Finish: White Ext./Mesa Red Int.t) Finish: Mesa Red Ext./White Int.

2) Width: 1 inch (25.4 mm).a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.

08 52 00.10-15

d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Dark Chocolate.i) Finish: Black.j) Finish: White Ext./Desert Sand Int.k) Finish: Desert Sand Ext./White Int.

d. Pattern: As scheduled and indicated on Drawings.

2.4 ALUMINUM-CLAD PATIO DOOR ASSEMBLlES

A. Basis of Design: Custom EPIC Series patio door assemblies as manufactured by JELD-WEN, Inc.1. Patio Door Type: In-swing patio doors, wood construction.2. Patio Door Type: Out-swing patio doors, wood construction.

B. Patio Door Fabrication:1. Glass: Mounted using silicone glazing compound.2. Glazing Bead: Traditional Beveled.3. Glazing Bead: Contemporary Square.4. Glazing Bead: Flush.

C. Frames:1. Material: Select kiln-dried pine AuraLast treated wood.2. Jamb Width: 4-9/16 inches (116 mm).3. Cladding: 0.050 inch (1.27 mm) extruded aluminum.

D. Swinging Door Panels:1. Material: Select kiln-dried pine AuraLast treated wood and engineered wood substrate

core.2. Cladding: 0.050 inch (1.27 mm) extruded aluminum.3. Thickness: 1-23/32 inch (43.7 mm).4. Layout: 6-5/8 inch (168.3 mm) top rail and stiles.5. Stiles: Wide: 6-5/8 inch (168.3 mm)6. Stiles: Narrow: 4-5/8 inch (117.8 mm)7. Bottom Rail: 11 inch (279.4 mm).8. Bottom Rail: 11 inch with Craftsman Options (279.4 mm).9. Radius Top Rail: Not required.10. Radius Top Rail: Required.

E. Exterior Trim:1. Casing: Folding Nail Flange; Standard.2. Casing: Nail Flange.3. Casing: Brickmould.4. Casing: Adams Casing.5. Casing: 3-1/2 inch (88.9 mm) Flat Casing.6. Casing: 2 inch (50.8 mm) Flat Casing.7. Casing: Manchester Casing.8. Casing: No Exterior Trim.9. Casing: Aluminum Pendleton Casing.10. Casing: Aluminum Kenison Casing.

F. Extension Jambs: Factory applied on three sides of frame interior, in wall depths up to 6-9/16 inches (166.7 mm).

G. Weatherstripping: Continuous dual foam filled bulb seal compressed between exterior of

08 52 00.10-16

panel and three sides of frame. Manufacturer's standard two-piece adjustable astragal on double door units.

H. Sills:1. ADA Accessible Sill: 1/2 inch (12.7 mm) high, dark bronze anodized aluminum with

kick plate and integral door sweep at panel; Standard.2. No sill required.

I. Hardware:1. Swinging Doors:

a. Hinges: Ball Bearing Hinge; Standard.b. Hinges: 4-1/2 inches (114.3 mm) Ball Bearing Hinges; square corners.c. Hinge Finish: As selected by Architect.d. Hinge Finish: Brushed Chrome.e. Hinge Finish: Polished Brass.f. Hinge Finish: Authentic Oil-Rubbed Bronze.g. Hinge Finish: Satin Nickel.h. Locks: No Lock; Standard.i. Locks: 3-5/8 Lock and Deadbolt.j. Locks: 5-1/2 Lock and Deadbolt.k. Handle Set: No Handle; Standard.l. Handle Set: Dane Lever.m. Handle Set: Quantum Lever.n. Handle Set: Von Duprin 996L Rhodes with Escutch and Lock (1 per act).o. Handle Set: Von Duprin 996L Sparta with Escutch and Lock (1 per act).p. Handle Set: Donjo 4 x16 inch (102 x 406 mm) Pull Plate; no cylinder lock.q. Handle Set Finish: As Selected by Architectr. Handle Set Finish: Bronze; Standard.s. Handle Set Finish: Satin.t. Exit Device: None; Standard.u. Exit Device: Von Duprin - Exit Device; 1 per active panel.v. Exit Device: Falcon - Exit Device with Crossbar.w. Closer: None; Standard.x. Closer: LCN1461 Closer - 1 per active panel.y. Closer Finish: Powder Coat Dark Bronze finish; Standard.z. Closer Finish: Powder Coat Aluminumaa. Kickplate: None; Standard.bb. Kickplate: Donjo Interior Only.cc. Kickplate Finish: Authentic Oil Rubbed Bronze.dd. Kickplate Finish: Stainless Steel.

J. Glazing for Patio Doors:1. Glazing Type: Insulated Wet Interior Glaze.


b. Overall Nominal Thickness: 3/4 inch (19 mm).c. Glass Coating: Low-E 366 Tempered; Standard.d. Glass Coating: Low-E Tempered.e. Glass Coating: Low-E 180 Tempered.f. Glass Coating: Low-E EC Tempered.g. Glass Coating: Low E EC 366 Tempered; i89 In/366 Out.h. Glass Protection: Plastic preserve film on interior and exterior of glass.i. Air Space: Argon; Standard.j. Air Space: High Altitude; above 4000 ft (1219.2 m) elevation.

2. Glazing Type: Single Wet Interior Glaze.a. Glass Coating: As selected by Architect.

08 52 00.10-17

b. Glass Coating: Clear Tempered; Standard.c. Glass Coating: Bronze Tempered.d. Glass Coating: Gray Tempered.e. Glass Coating: Obscure Tempered.f. Glass Coating: Clear Tempered plus Laminated; meets CA Urban Fire Code.g. Glass Protection: No Protective Film.

K. Exterior Sliding Insect Screens: None.




a) Width: 5/8 inch (16 mm).b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inch (28.5 mm).d) Width: 1-3/8 inch (34.9 mm).e) Width: 2-5/16 inch (58.7 mm).

3) Profiles: Putty.a) Width: 5/8 inch (16 mm).b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inches (28.5 mm).d) Width: 1-3/8 inches (34.9 mm).e) Width: 2-5/16 inches (58.7 mm).

4) Profiles: Contemporary.a) Width: 5/8 inch (16 mm).b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inches (28.5 mm).d) Width: 1-3/8 inches (34.9 mm).e) Width: 2-5/16 inches (58.7 mm).

5) Pattern: As scheduled and indicated on Drawings.a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: Black.f) Finish: French Vanilla.g) Finish: Hartford Green.h) Finish: Mesa Red.i) Finish: Silver.j) Finish: Steele Gray.k) Finish: Dark Chocolate.l) Finish: Hunter Green.m) Finish: Heirloom White.n) Finish: Smoke.o) Finish: Bone White.p) Finish: Ivory.q) Finish: Luxury Bronze.r) Finish: Mocha Cream.s) Finish: Sea Foam.t) Finish: Stone.u) Finish: Flagstone.v) Finish: Cocoa.w) Finish: Cranberry.

08 52 00.10-18

x) Finish: Surf.y) Finish: Moss.z) Finish: Stormy.aa) Finish: Admiral.bb) Finish: Navy.

b. Internal Shadow Bar:1) Finish: Light Bronze finish; Standard.2) Finish: Silver finish.

c. Internal Spacer Bar:1) Colors: Black; Standard.2) Colors: Silver.3) Colors: Gray.


unit.2) Profile: Match exterior muntin.

2. Type: Full Surround Wood Grilles.a. Material: Unfinished clear pine.b. Profile: Rectangular.c. Pattern: As scheduled and indicated on Drawings.d. Width: 7/8 inch (22 mm).e. Width: 1-1/8 inches (28.5 mm).f. Width: 1-3/8 inches (34.9 mm).




a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Black.i) Finish: White Ext./Desert Sand Int.j) Finish: Desert Sand Ext./White Int.k) Finish: White Ext./Chestnut Bronze Int.l) Finish: Chestnut Bronze Ext./White Int.m) Finish: White Ext./Black Int.n) Finish: Black Ext./White Int.o) Finish: White Ext./French Vanilla Int.p) Finish: French Vanilla Ext./White Int.q) Finish: White Ext./Hartford Green Int.r) Finish: Hartford Green Ext./White Int.

08 52 00.10-19

s) Finish: White Ext./Mesa Red Int.t) Finish: Mesa Red Ext./White Int.

2) Width: 1 inch (25.4 mm).a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Dark Chocolate.i) Finish: Black.j) Finish: White Ext./Desert Sand Int.k) Finish: Desert Sand Ext./White Int.


2.5 WOOD WINDOWS AND PATIO DOORS - GENERAL

A. Design Requirements:1. Compliance: Provide assemblies capable of complying with requirements indicated,

based on testing manufacturer's patio doors that are representative of those specified.2. Test Size: In compliance with requirements of AAMA/WDMA/CSA 101/I.S.2/A440

(NAFS).3. Structural Requirements: Provide assemblies complying with requirements indicated:

a. Performance Class: As indicated on drawings.b. Performance Class: ________.c. Performance Grade: As indicated on drawings.d. Performance Grade: ________.

4. NFRC Requirements: Provide assemblies complying with the following total window ratings:a. U-Factor: ________ in accordance with NFRC 100.b. Solar Heat Gain Coefficient (SHGC): ________ in accordance with NFRC 200.c. Visible Transmittance (VT): ________ in accordance with NFRC 200.

B. Materials:1. Species: As selected by Architect.2. Species: AuraLast Pine; Standard.3. Species: Mahogany.4. Species: Vertical Grain Douglas Fir.

C. Installation Accessories:1. Flashing: Refer to Section 07 60 00 - Flashing and Sheet Metal.2. Sealants: OSI Sealants by Henkel Corporation.3. Sealants: Refer to Section 07 92 00 (07920) - Joint Sealants.4. Sealants: Manufacturer recommended sealants maintain watertight conditions.

D. Interior Finishes for windows:1. Finish: Natural; Standard.2. Finish: Primed.3. Finish: Pre-finished paint.

a. Color: As selected by Architect.b. Color: Brilliant White.c. Color: Desert Sand.d. Color: Ivory.e. Color: Black.f. Color: Dove.g. Color: Gunmetal.

08 52 00.10-20

h. Color: Black Frame and Brilliant White Sash.i. Color: Brilliant White and Black Sash.



E. Exterior Finishes for Windows:1. Finish: Primed; Standard.2. Finish: Natural.

F. Interior Finishes for Patio Doors:1. Finish: Natural; Standard.2. Finish: Primed.3. Finish: Pre-finished paint.

a. Color: As selected by Architect.b. Color: Brilliant White.c. Color: Desert Sand.d. Color: Ivory.e. Color: Black.f. Color: Dove.g. Color: Gunmetal.h. Color: Black Frame and Brilliant White Sash.i. Color: Brilliant White and Black Sash.


5. Finish: Pre-finished clear lacquer finish

G. Exterior Finishes for Patio Doors:1. Finish: Primed; Standard.2. Finish: Natural.

2.6 WOOD WINDOW ASSEMBLIES

A. Basis of Design: Custom EPIC Series wood window assemblies as manufactured by JELD-WEN, Inc.

B. Window Fabrication:1. Awning Windows:



2. Casement Windows:

08 52 00.10-21



3. Double-Hung Windows:a. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with

interior applied profiled wood stops.1) Glazing Bead: Traditional Beveled.

4. Fixed Double-Hung Windows:a. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with

interior applied profiled wood stops.1) Glazing Bead: Traditional Beveled.

5. Fixed Casement Windows:a. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with


6. Insash Casement/Awning Radius and Geometric Windows:a. Frame: Corner joints mechanically fastened.b. Sash: Corner joints mortised and tenoned, glued and nailed from interior.c. Glass: Mounted using silicone glazing compound on exterior, secured with


C. Frames:1. Material: Select kiln-dried pine AuraLast treated wood.2. Casement, Awning and Picture Windows Base Frame: 3-3/16 inches (80.96 mm).3. Double-Hung Window Base Frame: 5-1/2 inches (140 mm).

D. Sash:1. Material: Select kiln-dried pine AuraLast treated wood.2. Sash Thickness: Double-Hung Windows. 1-3/4 inches (44 mm).

a. Double-Hung Windows Upper Sash: Standard Double-Hung.b. Double-Hung Windows Upper Sash: Single-Hung - Fixed Top Sash.c. Double-Hung Windows Upper Sash: Fixed Upper/Fixed Lower.

E. Exterior Trim:1. Casing: Brickmould; Standard.2. Casing: No Exterior Trim.3. Casing: 2 inch (50.8 mm) Flat Casing.4. Casing: 3-1/2 inch (88.9 mm) Flat Casing.5. Casing: 4-1/2 inch (114.3 mm) Flat Casing.6. Casing: 5-1/2 inch (139.7 mm) Flat Casing.7. Casing: Adams Casing.8. Casing: Stucco Brickmould.9. Casing: Heritage Brickmould.10. Casing: 1x4 with Backband Casing.

08 52 00.10-22

11. Casing: Bullnose Casing.12. Casing: Wood Pendleton Casing.13. Casing: Subsill/Sillnose Only.14. Casing: 3-1/2 inch (88.9 mm) Side/5-1/2 inch (139.7 mm) Head Casing.15. Sill Nosing: Standard Sill Nosing; Standard.16. Sill Nosing: Extended Sill Nosing.17. Sill Horn: No Sill Horn.18. Sill Horn: Extended Sill Horn.19. Mull Caps: 1/2 inch (12.7 mm) width; Standard.20. Mull Caps: 1 inch (25.4 mm) width.21. Mull Caps: 2 inches (50.8 mm) width.22. Mull Caps: 3-1/2 inches (88.9 mm) width.23. Mull Caps: 6 inches (152.4 mm) width.

F. Factory Applied Extension Jambs: Provide on four sides of frame interior 5/4 up to 7-1/2 inches (190.5 mm).

G. Weatherstripping: Foam lined jamb liners forming a compression seal against sash stiles, dual durometer bulb seal between top and bottom rails of sash and frame, and bulb seal between top rail and header, and between sash meeting rails.

H. Window Hardware:1. Awning Windows:

a. Hinges: Sliding steel reinforced nylon shoe in stainless steel track.b. Operator: Single pull scissor arm with track; Standard.c. Operator: Dual pull scissor arm with bracketd. Operator/Hinge Finish: Stainless Steel; Standard.e. Handle Profile: Nesting Crank Handle; Standard.


f. Handle Profile: Round Handle.1) Finish: As selected by architect2) Finish: White; Standard.3) Finish: Desert Sand.4) Finish: Chestnut Bronze.5) Finish: Polished Brass.6) Finish: Antique Brass.7) Finish: Brushed Chrome.8) Finish: Polished Chrome.9) Finish: Authentic Oil-Rubbed Bronze.10) Finish: Gloss Black.11) Finish: Satin Nickel.

g. Handle Profile: No Handle.2. Casement Windows:

a. Hinges: Sliding steel reinforced nylon shoe in stainless steel track; Standard.b. Hinges: Butt Hinge, Single Arm Operator.

08 52 00.10-23

c. Hinges: Egress Hinge.d. Operator: Single pull scissor arm with track; Standard.e. Operator: Dual pull scissor arm with bracket.f. Operator/Hinge Finish: Stainless Steel; Standard.g. Handle Profile: Nesting Crank Handle; Standard.


h. Handle Profile: Round Handle.1) Finish: As selected by architect2) Finish: White; Standard.3) Finish: Desert Sand.4) Finish: Chestnut Bronze.5) Finish: Polished Brass.6) Finish: Antique Brass.7) Finish: Brushed Chrome.8) Finish: Polished Chrome.9) Finish: Authentic Oil-Rubbed Bronze.10) Finish: Gloss Black.11) Finish: Satin Nickel.

i. Handle Profile: No Handle.3. Double-Hung Windows:

a. Balance: Compression type block and tackle.b. Lock: Cam Locks; Standard.


c. Lock: Keyed Cam Locks.1) Finish: As selected by architect2) Finish: White; Standard.3) Finish: Desert Sand.4) Finish: Chestnut Bronze.5) Finish: Polished Brass.6) Finish: Antique Brass.7) Finish: Brushed Chrome.8) Finish: Polished Chrome.9) Finish: Authentic Oil-Rubbed Bronze.10) Finish: Gloss Black.

08 52 00.10-24

11) Finish: Matte Black.12) Finish: Satin Nickel.

d. Sash Retainer: Recessed top and bottom.e. Finger Lifts: No Finger Lifts.f. Finger Lifts: With Finger Lifts.g. Jamb Liner Finish: Beige.h. Jamb Liner Finish: White.

4. Fixed Windows: None.5. Insash Casement/Awning Geometric windows: None.

I. Glazing for Windows:1. Glazing Type: Insulated glass.


b. Strength: Annealed; Standard.c. Strength: Tempered; meets CA Urban Fire Code.d. Strength: Tempered In/Annealed Out; meets CA Urban Fire Code.e. Overall Nominal Thickness: 3/4 inch (19 mm).f. Glass Coating: As selected by Architect.g. Glass Coating: Low-E 366; Standard.h. Glass Coating: Low-E.i. Glass Coating: Low-E 180.j. Glass Coating: Low-E EC.k. Glass Coating: Low-E EC 366; i89 In/366 Out.l. Glass Protection: Plastic preserve film on interior and exterior of glass.m. Air Space: Argon; Standard.n. Air Space: High Altitude; above 4000 ft (1219.2 m) elevation.

2. Glazing Type: Triple Glazing.a. Description: Three panes of glass utilizing continuous roll formed stainless steel

spacer and dual seal sealants.b. Overall Nominal Thickness: 1-1/4 inches (31.75 mm).c. Glass Coating: As selected by Architect.d. Glass Coating: Low-E; Standard.e. Glass Coating: Low-E Obscure.f. Glass Coating: Low-E Glue Chip.g. Glass Coating: Low-E Delta Frost.

J. Exterior Insect Screens:1. Material: Black UltraVue fiberglass screen cloth (19 x 19 mesh) set in painted roll

formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Hartford Green.g. Finish: Mesa Red.h. Finish: Silver.i. Finish: Steele Gray.j. Finish: Dark Chocolate.k. Finish: Hunter Green.l. Finish: Bone White.m. Finish: Heirloom White.n. Finish: Smoke.o. Finish: Ivory.p. Finish: Luxury Bronze.

08 52 00.10-25

q. Finish: Mocha Cream.r. Finish: Sea Foam.s. Finish: Stone.t. Finish: Flagstone.u. Finish: Cocoa.v. Finish: Cranberry.w. Finish: Surf.x. Finish: Moss.y. Finish: Stormy.z. Finish: Admiral.aa. Finish: Navy.bb. Finish: Black.

2. Material: Charcoal aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame; Standard.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Hartford Green.g. Finish: Mesa Red.h. Finish: Silver.i. Finish: Steele Gray.j. Finish: Dark Chocolate.k. Finish: Hunter Green.l. Finish: Bone White.m. Finish: Heirloom White.n. Finish: Smoke.o. Finish: Ivory.p. Finish: Luxury Bronze.q. Finish: Mocha Cream.r. Finish: Sea Foam.s. Finish: Stone.t. Finish: Flagstone.u. Finish: Cocoa.v. Finish: Cranberry.w. Finish: Surf.x. Finish: Moss.y. Finish: Stormy.z. Finish: Admiral.aa. Finish: Navy.bb. Finish: Black.

3. Material: Silver aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Hartford Green.g. Finish: Mesa Red.h. Finish: Silver.i. Finish: Steele Gray.j. Finish: Dark Chocolate.k. Finish: Hunter Green.l. Finish: Bone White.

08 52 00.10-26

m. Finish: Heirloom White.n. Finish: Smoke.o. Finish: Ivory.p. Finish: Luxury Bronze.q. Finish: Mocha Cream.r. Finish: Sea Foam.s. Finish: Stone.t. Finish: Flagstone.u. Finish: Cocoa.v. Finish: Cranberry.w. Finish: Surf.x. Finish: Moss.y. Finish: Stormy.z. Finish: Admiral.aa. Finish: Navy.bb. Finish: Black.

4. Material: Bronze aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Hartford Green.g. Finish: Mesa Red.h. Finish: Silver.i. Finish: Steele Gray.j. Finish: Dark Chocolate.k. Finish: Hunter Green.l. Finish: Bone White.m. Finish: Heirloom White.n. Finish: Smoke.o. Finish: Ivory.p. Finish: Luxury Bronze.q. Finish: Mocha Cream.r. Finish: Sea Foam.s. Finish: Stone.t. Finish: Flagstone.u. Finish: Cocoa.v. Finish: Cranberry.w. Finish: Surf.x. Finish: Moss.y. Finish: Stormy.z. Finish: Admiral.aa. Finish: Navy.bb. Finish: Black.

5. Screen Style: Full Screen.6. Screen Style: Half Screen.

K. Interior Insect Screens:1. Material: Black UltraVue fiberglass screen cloth (19 x 19 mesh) set in painted roll

formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.

08 52 00.10-27

e. Finish: French Vanilla.f. Finish: Silver.g. Finish: Steele Gray.h. Finish: Dark Chocolate.i. Finish: Black.

2. Material Black UltraVue fiberglass screen cloth (19 x 19 mesh) set in a wood veneer roll formed aluminum screen.a. Finish: As selected by Architect.b. Finish: Pine.c. Finish: Knotty Alder.d. Finish: Mahogany.e. Finish: Fir.f. Finish: Red Oak.g. Finish: Walnut.h. Finish: Cherry.i. Finish: White Oak.j. Finish: Alder.

3. Material: Charcoal aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame; Standard.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Silver.g. Finish: Steele Gray.h. Finish: Dark Chocolate.i. Finish: Black.

4. Material: Silver aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Silver.g. Finish: Steele Gray.h. Finish: Dark Chocolate.i. Finish: Black.

5. Material: Bronze aluminum screen cloth (18 by 16 mesh) set in painted roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Brilliant White.c. Finish: Desert Sand.d. Finish: Chestnut Bronze.e. Finish: French Vanilla.f. Finish: Silver.g. Finish: Steele Gray.h. Finish: Dark Chocolate.i. Finish: Black.

6. Material: Charcoal aluminum screen cloth (18 by 16 mesh) set in wood veneer roll formed aluminum frame; Standard.a. Finish: As selected by Architect.b. Finish: Pine.c. Finish: Knotty Alder.d. Finish: Mahogany.

08 52 00.10-28

e. Finish: Fir.f. Finish: Red Oak.g. Finish: Walnut.h. Finish: Cherry.i. Finish: White Oak.j. Finish: Alder.

7. Material: Silver aluminum screen cloth (18 by 16 mesh) set in wood veneer roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Pine.c. Finish: Knotty Alder.d. Finish: Mahogany.e. Finish: Fir.f. Finish: Red Oak.g. Finish: Walnut.h. Finish: Cherry.i. Finish: White Oak.j. Finish: Alder.

8. Material: Bronze aluminum screen cloth (18 by 16 mesh) set in wood veneer roll formed aluminum frame.a. Finish: As selected by Architect.b. Finish: Pine.c. Finish: Knotty Alder.d. Finish: Mahogany.e. Finish: Fir.f. Finish: Red Oak.g. Finish: Walnut.h. Finish: Cherry.i. Finish: White Oak.j. Finish: Alder.




a) Width: 5/8 inch (15.9 mm).b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inch (28.5 mm).d) Width: 1-3/8 inch (34.9 mm).e) Width: 2-5/16 inch (58.7 mm).

3) Profiles: Putty.a) Width: 5/8 inch (15.9 mm).b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inch (28.5 mm).d) Width: 1-3/8 inch (34.9 mm).e) Width: 2-5/16 inch (58.7 mm).

4) Profiles: Contemporary.a) Width: 5/8 inch (15.9 mm).b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inch (28.5 mm).d) Width: 1-3/8 inch (34.9 mm).e) Width: 2-5/16 inch (58.7 mm).

5) Pattern: As scheduled and indicated on Drawings.a) Finish: As selected by Architect.

08 52 00.10-29

b) Finish: Primed Aluminum.c) Finish: Brilliant White.d) Finish: Desert Sand.e) Finish: Chestnut Bronze.f) Finish: Black.g) Finish: French Vanilla.h) Finish: Hartford Green.i) Finish: Mesa Red.j) Finish: Silver.k) Finish: Steele Gray.l) Finish: Dark Chocolate.m) Finish: Hunter Green.n) Finish: Bone White.o) Finish: Heirloom White.p) Finish: Smoke.q) Finish: Ivory.r) Finish: Luxury Bronze.s) Finish: Mocha Cream.t) Finish: Sea Foam.u) Finish: Stone.v) Finish: Flagstone.w) Finish: Cocoa.x) Finish: Cranberry.y) Finish: Surf.z) Finish: Moss.aa) Finish: Stormy.bb) Finish: Admiral.cc) Finish: Navy.

b. Internal Shadow Bar:1) Finish: Light Bronze; Standard.2) Finish: Silver.

c. Interior Spacer Bars:1) Finish: Black; Standard.2) Finish: Silver.3) Finish: Gray.


unit.2) Profile: Traditional Bar; Standard.3) Profile: High Profile Bead.4) Profile: Contemporary.5) Profile: Putty.

2. Type: Full Surround Wood Grilles.a. Material: Unfinished clear pine.b. Profile: Traditional Bar; Standard.c. Profile: High Profile Bead.d. Profile: Contemporary.e. Pattern: As scheduled and indicated on Drawings.f. Width: 7/8 inch (22 mm).g. Width: 1-1/8 inches (28.5 mm).h. Width: 1-3/8 inches (34.9 mm).


1) Width: 5/8 inch (15.9 mm).a) Finish: As selected by Architect.

08 52 00.10-30

b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Dark Chocolate.i) Finish: Black.


a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Black.i) Finish: White Ext./Desert Sand Int.j) Finish: Desert Sand Ext./White Int.k) Finish: White Ext./Chestnut Bronze Int.l) Finish: Chestnut Bronze Ext./White Int.m) Finish: White Ext./Black Int.n) Finish: Black Ext./White Int.o) Finish: White Ext./French Vanilla Int.p) Finish: French Vanilla Ext./White Int.q) Finish: White Ext./Hartford Green Int.r) Finish: Hartford Green Ext./White Int.s) Finish: White Ext./Mesa Red Int.t) Finish: Mesa Red Ext./White Int.

2) Width: 1 inch (25.4 mm).a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Dark Chocolate.i) Finish: Black.j) Finish: White Ext./Desert Sand Int.k) Finish: Desert Sand Ext./White Int.


2.7 WOOD PATIO DOOR ASSEMBLlES

A. Basis of Design: Custom EPIC Series patio door assemblies as manufactured by JELD-WEN, Inc.1. Patio Door Type: In-swing patio doors, wood construction.2. Patio Door Type: Out-swing patio doors, wood construction.

B. Patio Door Fabrication:1. Glass: Mounted using silicone glazing compound on exterior and acrylic sealant on

interior.2. Glazing Bead: Traditional Beveled.3. Glazing Bead: Contemporary Square.

08 52 00.10-31

4. Glazing Bead: Flush.

C. Frames:1. Material: Select kiln-dried pine AuraLast treated wood.2. Jamb Width: 4-9/16 inches (116 mm).

D. Swinging Door Panels:1. Material: Select kiln-dried pine AuraLast treated wood and Timberstrand engineered

wood substrate.2. Thickness: 1-23/32 inches (43.7 mm).3. Layout: 6-5/8 inches (168.3 mm) top rail and stiles.4. Stiles: Wide: 6-5/8 inches (168.3 mm).5. Stiles: Narrow: 4-5/8 inches (117.8 mm).6. Bottom Rail: 11 inch (279.4 mm).7. Bottom Rail: 11 inch with Craftsman Options (279.4 mm).8. Radius Top Rail: Not required.9. Radius Top Rail: Required.

E. Exterior Trim:1. Casing: Brickmould; Standard.2. Casing: No Exterior Trim.3. Casing: 2 inch (50.8 mm) Flat Casing.4. Casing: 3-1/2 inch (88.9 mm) Flat Casing.5. Casing: 4-1/2 inch (114.3 mm) Flat Casing.6. Casing: 5-1/2 inch (139.7 mm) Flat Casing.7. Casing: Adams Casing.8. Casing: Stucco Brickmould.9. Casing: Heritage Brickmould.10. Casing: 1 x 4 with Backband Casing.11. Casing: Bullnose Casing.12. Casing: Wood Pendleton Casing.13. Casing: Subsill/Sillnose Only.14. Casing: 3-1/2 inch (88.9 mm) Side/5-1/2 inch (139.7 mm) Head Casing.15. Mull Caps: 1/2 inch (12.7 mm) width; Standard.16. Mull Caps: 1 inch (25.4 mm) width.17. Mull Caps: 2 inches (50.8 mm) width.18. Mull Caps: 3-1/2 inches (88.9 mm) width.19. Mull Caps: 6 inches (152.4 mm) width.

F. Extension Jambs: Factory applied on three sides of frame interior, in wall depths up to 6-9/16 inch (166.7 mm).

G. Weatherstripping: Continuous dual foam filled bulb seal compressed between exterior of panel and three sides of frame. Manufacturer's standard two-piece adjustable astragal on double door units.

H. Sills:1. ADA Accessible Sill: 1/2 inch (12.7 mm) high, dark bronze anodized aluminum with

kick plate and integral door sweep at panel; Standard.2. No sill required.

I. Hardware:1. Swinging Doors:

a. Hinges: Ball Bearing Hinge; Standard.b. Hinges: 4-1/2 inches (114.3 mm) Ball Bearing Hinges; square corners.c. Hinge Finish: Brushed Chrome.d. Hinge Finish: Polished Brass.

08 52 00.10-32

e. Hinge Finish: Authentic Oil-Rubbed Bronze.f. Hinge Finish: Satin Nickel.g. Locks: No Lock; Standard.h. Locks: 3-5/8 Lock and Deadbolt.i. Locks: 5-1/2 Lock and Deadbolt.j. Handle Set: No Handle; Standard.k. Handle Set: Dane Lever.l. Handle Set: Quantum Lever.m. Handle Set: Von Duprin 996L Rhodes with Escutch and Lock; 1 per act.n. Handle Set: Von Duprin 996L Sparta with Escutch and Lock; 1 per act.o. Handle Set: Donjo 4 x 16 inch (102 x 406 mm) Pull Plate; no cylinder lock.p. Handle Set Finish: As Selected by Architectq. Handle Set Finish: Bronze; Standard.r. Handle Set Finish: Satin.s. Exit Device: None; Standard.t. Exit Device: Von Duprin - Exit Device; 1 per active panel.u. Exit Device: Falcon - Exit Device with Crossbar.v. Closer: None; Standard.w. Closer: LCN1461 Closer - 1 per active panel.x. Closer Finish: Powder Coat Dark Bronze; Standard.y. Closer Finish: Powder Coat Aluminumz. Kickplate: None; Standard.aa. Kickplate: Donjo Interior Only.bb. Kickplate: Donjo Exterior Only.cc. Kickplate: Donjo Interior/Exterior Only.dd. Kickplate Finish: Authentic Oil Rubbed Bronze.ee. Kickplate Finish: Stainless Steel.

J. Glazing for Patio Doors:1. Glazing Type: Insulated Wet Interior Glaze.


b. Overall Nominal Thickness: 3/4 inch (19 mm).c. Glass Coating: As selected by Architect.d. Glass Coating: Low-E 366 Tempered; Standard.e. Glass Coating: Low-E Tempered.f. Glass Coating: Low-E 180 Tempered.g. Glass Coating: Low-E EC Tempered.h. Glass Coating: Low-E 340 Tempered.i. Glass Coating: Low E EC 366 Tempered plus Laminated.j. Glass Protection: Plastic preserve film on interior and exterior of glass.k. Air Space: Argon; Standard.l. Air Space: High Altitude; above 4000 ft (1219.2 elevation).

2. Glazing Type: Single Wet Interior Glaze.a. Glass Coating: As selected by Architect.b. Glass Coating: Clear Tempered; Standard.c. Glass Coating: Bronze Tempered.d. Glass Coating: Gray Tempered.e. Glass Coating: Obscure Tempered.f. Glass Coating: Glue Chip Tempered.g. Glass Coating: Seedy Reamy Tempered.h. Glass Coating: Rain Tempered.i. Glass Coating: Narrow Reed Tempered.j. Glass Coating: Green Tint Tempered.k. Glass Coating: Clear Tempered plus Laminated; meets CA Urban Fire Code.l. Glass Protection: No Protective Film.

08 52 00.10-33

K. Exterior Sliding Insect Screens: None.




a) Width: 5/8 inch (16 mm).b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inches (28.5 mm).d) Width: 1-3/8 inches (34.9 mm).e) Width: 2-5/16 inches (59 mm).

3) Profiles: Putty.a) Width: 5/8 inch (16 mm).b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inches (28.5 mm).d) Width: 1-3/8 inches (34.9 mm).e) Width: 2-5/16 inches (59 mm).

4) Profiles: Contemporary.a) Width: 5/8 inch (16 mm).b) Width: 7/8 inch (22 mm).c) Width: 1-1/8 inches (28.5 mm).d) Width: 1-3/8 inches (34.9 mm).e) Width: 2-5/16 inches (59 mm).

5) Pattern: As scheduled and indicated on Drawings.a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Chestnut Bronze.d) Finish: Desert Sand.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Hunter Green.i) Finish: Black.j) Finish: Silver.k) Finish: Steele Gray.l) Finish: Heirloom White.m) Finish: Smoke.n) Finish: Dark Chocolate.o) Finish: Primed Wood.p) Finish: Primed Aluminum.q) Finish: Stone.r) Finish: Flagstone.s) Finish: Cocoa.t) Finish: Cranberry.u) Finish: Surf.v) Finish: Moss.w) Finish: Stormy.x) Finish: Admiral.y) Finish: Navy.z) Finish: Luxury Bronze.aa) Finish: Bone White.bb) Finish: Ivory.cc) Finish: Mocha Cream.dd) Finish: Sea Foam.

08 52 00.10-34

b. Internal Shadow Bar:1) Finish: Light Bronze; Standard.2) Finish: Silver.

c. Internal Spacer Bar:1) Finish: Black; Standard.2) Finish: Silver.3) Finish: Gray.


unit.2) Profile: Bead.3) Profile: Contemporary.4) Profile: Putty.

2. Type: Full Surround Wood Grilles.a. Material: Unfinished clear pine.b. Exterior Profile: Rectangular.c. Interior Profile: Bead.d. Interior Profile: Contemporary.e. Pattern: As scheduled and indicated on Drawings.f. Width: 7/8 inch (22 mm).g. Width: 1-1/8 inches (28.5 mm).h. Width: 1-3/8 inches (34.9 mm).




a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Black.i) Finish: White Ext./Desert Sand Int.j) Finish: Desert Sand Ext./White Int.k) Finish: White Ext./Chestnut Bronze Int.l) Finish: Chestnut Bronze Ext./White Int.m) Finish: White Ext./Black Int.n) Finish: Black Ext./White Int.o) Finish: White Ext./French Vanilla Int.p) Finish: French Vanilla Ext./White Int.q) Finish: White Ext./Hartford Green Int.r) Finish: Hartford Green Ext./White Int.s) Finish: White Ext./Mesa Red Int.

08 52 00.10-35

t) Finish: Mesa Red Ext./White Int.2) Width: 1 inch (25.4 mm).

a) Finish: As selected by Architect.b) Finish: Brilliant White.c) Finish: Desert Sand.d) Finish: Chestnut Bronze.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Dark Chocolate.i) Finish: Black.j) Finish: White Ext./Desert Sand Int.k) Finish: Desert Sand Ext./White Int.


PART 3 EXECUTION

3.1 EXAMINATION AND PREPARATION

A. Inspect and prepare openings and substrates using the methods recommended by the manufacturer for achieving best result for the substrates under project conditions.1. Inspect assembly components prior to installation.2. Verify rough opening conditions are within recommended tolerances.3. Form sheet metal sill pan in accordance with manufacturer's recommendations.4. Prepare assembly components for installation in accordance with manufacturer's

recommendations.

B. Do not proceed with installation until openings and substrates have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.

C. If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.

3.2 INSTALLATION

A. Install assemblies in accordance with manufacturer's installation guidelines and recommendations including the following.

B. Installation of Windows with Exterior Trim: Insert windows into rough opening.1. Shim side jambs straight.2. Inspect window for square, level and plumb.3. Fasten window through exterior trim around entire window.4. Test and adjust for smooth operation of window.5. Set all nails below wood surface.

C. Installation of Windows Without Exterior Trim: Insert windows into rough opening.1. Inspect window for square, level and plumb.2. Fasten window through jamb, shim and into rough opening jamb.3. Test and adjust for smooth operation of window.4. Set all nails below wood surface.5. Ensure seal between sill pan and inside face of windowsill.6. Install backer rod and sealant at exterior jambs and head.7. Apply backer rod and sealant on exterior below sill. Leave gaps for drainage.8. Seal interior joints between rough opening and jambs with backer rod and sealant.

08 52 00.10-36

D. Installation of Patio Doors with Exterior Trim: Insert patio doors into rough opening.1. Shim side jambs straight.2. Inspect patio door for square, level and plumb.3. Fasten patio door through exterior trim around entire patio door.4. Test and adjust for smooth operation of patio door.5. Set all nails below wood surface.6. Structurally secure head and side jambs through shims with mechanical fasteners.7. Structurally secure sill with mechanical fasteners.8. Apply flashing to sill, jambs and header.9. Apply sealant to upper corners and at sill.10. Install backer rod and sealant at rough opening and door jamb gap.11. Ensure seal between sill pan and inside face of patio door sill.12. Install lock set hardware per manufacturer's instructions.

E. Installation of Patio Doors without Exterior Trim: Insert patio doors into rough opening.1. Shim side jambs straight.2. Inspect patio door for square, level and plumb.3. Fasten patio door through jamb, shim and into rough opening jamb.4. Test and adjust for smooth operation of patio door.5. Structurally secure head and side jambs through shims with mechanical fasteners.6. Structurally secure sill with mechanical fasteners.7. Install backer rod and sealant at exterior jambs and head.8. Seal interior joints between rough opening and jambs with backer rod and sealant.9. Ensure seal between sill pan and inside face of patio door sill.10. Install lock set hardware per manufacturer's instructions.

3.3 FIELD QUALITY CONTROL

A. Manufacturers' Field Services: Field inspections.

3.4 CLEANING AND PROTECTION

A. Clean the exterior surface and glass with mild soap and water.

B. Protect installed windows from damage.

C. Remove and dispose of protective film from glass; touch-up, repair or replace damaged components and assemblies before Substantial Completion.

END OF SECTION

08 52 00.10-37

· web viewsection 08 52 00.10. wood and aluminum-clad-wood windows and patio doors. jeld-wen...

Documents