· web viewthe matrix is made using a pairwise comparison ahp methodology by decision-makers. ci =...

65
Citation: Kaushik, V., Khare, A., Boardman, R., Blazquez, M. (2020). 'Why Do Online Retailers Succeed? The Identification and Prioritization of Success Factors for Indian Fashion Retailers', Electronic Commerce Research and Applications, 39, Jan-Feb 2020: https://authors.elsevier.com/c/1aDXr5aO-oZX3X Why do online retailers succeed? The identification and prioritization of success factors for Indian fashion retailers Abstract: The exponential growth in online fashion retailing in India has brought several structural changes. Changing consumer needs and value propositions have made it imperative for online retailers to identify factors that are critical for its growth. The current study attempts to identify factors that influence consumers’ preference for online fashion retailers (OFR). The factors were identified and their weights were evaluated using the AHP methodology. Furthermore, the potential alternatives were ranked using VIKOR technique in R. Initially, 40 factors were identified, spread across 7 categories and in line with earlier research on online retail and views of retail experts from Indian online fashion retail sector. The analysis revealed that the category ‘webstore- image’ is most preferred and that the factors ‘online shop recognition’, ‘price’ and ‘reputation of stores’ were of importance. The study identified new factors that are important for the success and growth of online fashion retailing that are specific to India. 1

Upload: others

Post on 02-Mar-2021

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Citation: Kaushik, V., Khare, A., Boardman, R., Blazquez, M. (2020). 'Why Do Online Retailers Succeed? The Identification and Prioritization of Success Factors for Indian Fashion Retailers', Electronic Commerce Research and Applications, 39, Jan-Feb 2020: https://authors.elsevier.com/c/1aDXr5aO-oZX3X

Why do online retailers succeed? The identification and prioritization of success factors

for Indian fashion retailers

Abstract:

The exponential growth in online fashion retailing in India has brought several structural

changes. Changing consumer needs and value propositions have made it imperative for

online retailers to identify factors that are critical for its growth. The current study attempts to

identify factors that influence consumers’ preference for online fashion retailers (OFR). The

factors were identified and their weights were evaluated using the AHP methodology.

Furthermore, the potential alternatives were ranked using VIKOR technique in R. Initially, 40

factors were identified, spread across 7 categories and in line with earlier research on online

retail and views of retail experts from Indian online fashion retail sector. The analysis

revealed that the category ‘webstore-image’ is most preferred and that the factors ‘online

shop recognition’, ‘price’ and ‘reputation of stores’ were of importance. The study identified

new factors that are important for the success and growth of online fashion retailing that are

specific to India.

Keywords: Online fashion retailers; Online shopping; India; VIKOR; Decision making in

online shopping

1.Introduction.

E-commerce is defined as ‘all electronically mediated information exchanges between an

organisation and its external stakeholders’ (Chaffey, 2015). The e-commerce sector in India

is worth USD 19.5 billion and has grown substantially in different parts of the country due to

increasing internet penetration (KPMG, 2018). Furthermore, online retailing in India is

expected to increase 250 percent in the next 3 years, with 35-40 percent of the market being

attributed to the apparel segment (CRISIL, 2018). Indeed, the Indian Institute of e-commerce

posits that by 2020, India will be generating USD 100 billion through online retailing and $35

billion of that will be through online fashion retailing (Khosla, 2017). This highlights the

rapid growth and rising importance of online fashion retailing in India and why it is a key

1

Page 2:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

area for academic research.

The success of OFR such as Myntra, Jabong, Limeroad, Shopperstop, Craftsvilla, and Koovs

further highlight the acceptance and prevalence of online shopping in India, as well as the

highly competitive nature of it. The intense competition means that online fashion retailers

must ensure that they offer a superior online shopping experience and an all-round more

attractive proposition than their competitors. Although research has identified individual

factors required for the success of online retailers in general (Chiu et al., 2013; Kalelkar et al.,

2014; Dey et al., 2015; Ghatak et al., 2016; Gupta and Dubey, 2018; Srivastava et al.; 2018)

and investigated the acceptability of online stores (Hsu et al., 2010; Kabir et al., 2012; Liu et

al., 2015; Kahraman et al., 2017; Rouyendegh et al., 2018) to the author’s knowledge, no

study has focused specifically on what attributes make online fashion retailers successful and

how they should be prioritised. The present study will fill this gap. Online fashion retailing is

a complex and unique industry in comparison to other retail sectors as the inability to

physically examine and try on a product is a considerable barrier to making informed

decisions (Ha et al., 2007). On average, 42% of clothes that are bought online are returned

(Drapers, 2017) which is a major problem for online fashion retailers, emphasising the need

for the identification of factors that can make their online offering more appealing to

consumers.

Extant research has investigated the importance of individual attributes on fashion retailers’

websites, such as aesthetics (Ganguly et al., 2010; Wang et al., 2011; Luo et al., 2012; Hasan,

2016), post-purchase service (Lawrence and Tar, 2010; Roy Dholakia and Zhao, 2010;

Hasan, 2016; Cao et al., 2018), product presentation (Blanco et al., 2010; Song and Kim,

2012; Verhagen et al., 2013; Boardman and McCormick, 2019), product attributes (Flanagin

et al., 2014; Kempen et al., 2015; Fang et al., 2016; Chen et al., 2016), hendonic aspects

(Scarpi et al., 2014; Blazquez, 2014, Ahmad et al., 2017) and the reputation of the store (Utz

et al., 2012; Kim and Lennon, 2013). The present study will build on this literature in order to

see which attributes should be prioritised for fashion retailers in order to create a successful

business. Thus, this study aims to investigate online fashion retailing holistically, classifying

2

Page 3:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

all the attributes identified in the literature in terms of their importance for a successful online

retail strategy using online fashion retailing in India as a key new context.

The research questions that the study aims to answer are as follows:

RQ1: What are the critical success factors for online fashion retailing in India?

RQ2: How important are these success factors in generating ROI for retailers?

RQ3: What factors should online fashion retailers prioritise?

2. Literature Review

E-commerce has radically changed the dynamics of the business environment and the way in

which people and organisations are operating (Chaffey, 2015). The main challenges faced by

online retailers today are the provision of a superior customer service experience (Cao et al.,

2018), reducing the perceived risks of online shopping in the mind of consumers (Flanagin et

al., 2014), providing an effective website design (Ganguly et al., 2010; Hasan, 2016) and

reducing the number of returns (Oghazi, 2018).

In order to overcome these challenges, online fashion retailers need to identify the key areas

that they need to focus on in order to employ a successful business strategy. Extant literature

has identified the following factors as important attributes to consider for online retailers,

summarised in Table 1.

Table 1. Online Fashion Retailer’s Attributes (Source: Author’s own)

Category Factors Code References:

Webstore Aesthetics (WA)

Visual Design WA1 Ganguly et al., 2010; Wang et al., 2011; Luo et al., 2012; Hasan, 2016;

Navigation Design WA2 Ranganathan and Ganapathy, 2002; Ganguly et al., 2010; Luo et al., 2012; Hasan, 2016;

Information Design WA3 Ganguly et al., 2010; Luo et al., 2012; Hasan, 2016; Responsive Web Design WA4 Mohorovičić, 2013; Heath, 2017Home page design WA5 Kluge et al., 2013; Yoo and Kim, 2014E-store niche WA6 Experts opinion

       Post order convenience (POC)

Good customer support POC1 Roy Dholakia and Zhao, 2010; Luo et al., 2012; Hasan, 2016; Cao et al., 2018.

Order tracking facility POC2 Roy Dholakia and Zhao, 2010; Hasan, 2016On-time delivery POC3 Lawrence and Tar, 2010; Roy Dholakia and Zhao, 2010;

3

Page 4:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Category Factors Code References:Hasan, 2016; Cao et al., 2018.

Flexible return policy POC4 Chang et al., 2013; Oghazi et al., 2018Easy order cancellation POC5 Experts opinion

       

Product attributes (PA)

Product availability PA1 Roy Dholakia and Zhao, 2010; Hasan, 2016

Quality product PA2 Flanagin et al., 2014; Kempen et al., 2015; Fang et al., 2016; Chen et al., 2016

Wide range and categories PA3 Chen et al., 2016; Huyghe et al., 2017; Nisar and

Prabhakar, 2017Latest trend PA4 Experts opinionBranded products PA5 Experts opinion

Price PA6 Kim et al., 2012; Luo et al., 2012; Hasan, 2016; Chen et al., 2016

       

Webstore facilities (WF)

Across alternatives comparison WF1 Ranganathan and Ganapathy, 2002; Noh et al., 2013;

Loureiro and Breazeale, 2016; Bargain WF2 O’Brien, 2010Customization WF3 Cho and Fiorito; 2009; Cho, 2012.Style guide WF4 Experts opinion

Low cost shipping WF5 Roy Dholakia and Zhao, 2010; Luo et al., 2012; Hasan, 2016

Multiple payment options WF6 Experts opinionVarious delivery options WF7 Roy Dholakia and Zhao, 2010; Laudon and Traver, 2013

       

Tactile Information (TI)

Multiple Enlarged images TI1 Kim and Lennon, 2008; Blanco et al., 2010; Song and Kim, 2012; Verhagen et al., 2013; Kim and Lennon, 2010;

Modelled product TI2 Kim and Lennon, 2008; Kim et al., 2009; Boardman and McCormick, 2019

Visual Merchandise TI3 Ha and Lennon, 2010; Baek et al., 2015

Extensive product details TI4 Ranganathan and Ganapathy, 2002; Roy Dholakia and Zhao, 2010; Kim and Lennon, 2008; Blanco et al., 2010

Product video TI5 Xu et al., 2015; Boardman and McCormick, 2019       

Hedonic motivations (HM)

Online store layout. HM1 Wu et al., 2013; Izogo and Jayawardhena, 2018Celebrity endorsement HM2 Experts opinion

Discounts or cashback HM3 Park et al., 2012; Ballestar et al.,2016; Zhou et al., 2017; Vana et al., 2018

Shopping fun and enjoyment HM4 Scarpi et al., 2014; Ahmad et al., 2017

Special sales and deals HM5 Experts opinionPrevious experience with the shop HM6 Experts opinion

       

Webstore image (WI)

Reputation of store WI1 Utz et al., 2012; Kim and Lennon, 2013Gender/Age-group specific Online shop WI2 Kim et al., 2011; Lim and Yazdanifard, 2014;

Online shop recognition WI3 Park and Kim, 2003; Luo et al., 2012online ratings and review WI4 Wei and Lu, 2013; Engler et al., 2015; Wang et al., 2018; Secure Transaction and personal information. WI5 Ranganathan and Ganapathy, 2002; Thakur and

Srivastava, 2015; Blut et al., 2015; Chen et al., 2016

These criteria will be discussed in detail in the following section.

4

Page 5:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

2.1.1 Webstore Aesthetics

Both the fashion industry and the internet are predominantly visual environments in which

items are presented, explained and promoted entirely through visual imagery and information

(Wong et al., 2014). Therefore, the aesthetics of a retailer’s website plays a vitally important

role in attracting consumers. The importance of aesthetics in an online shopping environment

and web-store design has been stressed in extant research (Wang et al., 2011; Blut et al.,

2015). Indeed, website aesthetics can create a positive attitude towards the website that will,

in turn, encourage the intention to repurchase and produce positive word-of-mouth (Carolson

and O’Cass, 2011). The main design parameters for an online store are visual design,

navigation design and information design (Ganguly et al., 2010; Luo et al., 2012; Hasan,

2016). For OFR, these design parameters enhance the aesthetics of the stores and thus play a

major role in its success. In particular the homepage design impacts the customer’s decision

to shop at a particular online store (Yoo and Kim, 2014) and so it is very important for

retailers to design their homepage to a high standard.  Moreover, a responsive web design is a

feature in which a particular web-store adapts its pages and products across different online

platforms (tablet, mobile, desktop) aesthetically to enhance the user experience

(Mohorovičić, 2013; Heath, 2017).

2.1.2 Post order convenience

Retailers need to provide adequate support once the purchase takes place and make it as

convenient as possible for the customer (Roy Dholakia and Zhao, 2010; Hasan, 2016).

Customer support can be enhanced by providing a toll-free number or online link where all

queries can be resolved directly. Furthermore, the inclusion of an order tracking facility has

been found to be a significant factor for satisfaction and repurchase intentions in online

shopping (Roy Dholakia and Zhao, 2010). Also, timely delivery is a quintessential parameter

for customers satisfaction and loyalty (Blut et al., 2015; Cao et al., 2018). Customers prefer

online retailers that have multiple delivery options like fast delivery, instant delivery, normal

delivery and location-specific delivery (Roy Dholakia and Zhao, 2010; Laudon and Traver,

2013) as well as low priced delivery (Luo et al., 2012; Hasan, 2016). Moreover, a flexible

return policy has been used as a tool to improve business performance by offering easy

returns in order to enhance customer trust and repeat purchase behavior (Blut et al., 2015;

Oghazi et al., 2018.

5

Page 6:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

2.1.3. Product Attributes

Research has identified that the availability of the products and the quality of a retailer’s

products plays a vital role in enhancing customer-based brand equity (Flanagin et al., 2014;

Hasan, 2016). Therefore, it is essential that retailers provide a broad range of products and

product categories in order to aid customers in their decision-making process and make them

feel like they have a sufficient choice available to them (Huyghe et al., 2017; Nisar and

Prabhakar, 2017). Competitive pricing has also been identified as a key strategy to achieving

better positioning across online retailers as customers prefer to pay reduced prices online

(Hasan, 2016; Chen et al., 2016). Also, the customization of the products as per one’s desire

has been found to be a preferential factor when choosing which online retailer to shop at (Cho

and Fiorito; 2009; Cho, 2012).

2.1.4. Webstore facilities

Webstore facilities is an umbrella term in which different website features have been

emphasised. Research has identified that the features on a retailer’s website can affect the

buying behaviour of customers (Noh et al., 2013; Loureiro and Breazeale, 2016). For

instance, people enjoy shopping when they can bargain as it enhances the shopping

experience (O’Brien, 2010). Style guides are now often provided for consumers on retailer’s

websites in order to aid them in their decision-making by recommending styles that can be

coordinated to make outfits. According to experts, style guides will become an essential part

of the future of online fashion retailing. To add to the webstore facilities, experts suggest that

the provision of multiple payment options are also critical factors for online fashion retailers

as they reduce the hassle of the checkout stage for consumers. Similarly, the availability of

different delivery options is also important to provide. Customers prefer webstores that have

multiple delivery options such as fast delivery, instant delivery, normal delivery and location-

specific delivery (Roy Dholakia and Zhao, 2010; Laudon and Traver, 2013). Furthermore,

customers prefer online stores that offer minimal shipping charges (Luo et al., 2012; Hasan,

2016).

2.1.5. Tactile Information

Due to the inability of being able to touch and feel a product in an online setttings, tactile

information plays a major role in helping consumers to visualize the product, enhancing the

6

Page 7:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

sensory experience (Morton, 2018; Liu et al., 2017). Increased visual product information

produces more positive emotions, decreases product evaluation difficulty and positively

affects purchase intention (Jai et al., 2014). There are various ways to improve the tactile

experience and the first is by introducing multiple enlarged images on webstore (Song and

Kim, 2012; Verhagen et al., 2013). Employing an enlargement tool for the garment images

can help minimise users’ perceived risk of shopping online as it provides them with a more

detailed look at the item (Kim and Lennon, 2010). Product image enlargement is essential for

users when they are examining online products as it allows them to see the fabric structure

and quality in detail (Kim and Lennon, 2010). Indeed, Kim and Lennon (2010) found that the

enlargement of images had an effect on a user’s pleasure when shopping online and may also

contribute to providing a more enjoyable shopping experience for users. Online retailers can

minimise users’ perceived risk of shopping online by using human models to display the

garments, so that users can see how the clothes fit (Kim and Lennon, 2008; Kim et al., 2009;

Kim and Lennon, 2010). Previous research has found that users looking at a 3D model

experimented increased levels of enjoyment and involvement in their shopping process and

had a more positive perception of the online store compared to participants who saw lower

levels of image interactivity, such as simply clicking to enlarge the image (Kim et al. (2007,

Blazquez et al., 2014). Furthermore, images of humans increase the likelihood of producing

an emotional response from on an online user (Cyr and Head, 2013). Hence, fashion retailers

should display their clothes on models and mannequin as they are the most influential in

terms of consumer decision-making, followed by an effective and detailed zoom-function and

close-up of the fabric (Boardman and McCormick, 2019).

Research also suggests that the tactile information can be enhanced by elaborating on the

product details such as the manufacturing processes, fabric, style, washing instructions,

precautions and other attributes (Zhao, 2010; Kim and Lennon, 2008; Blanco et al., 2010).

Karimov et al. (2011) stress the importance of information content, recommending that

retailers deliver detailed and comprehensive product information in order to make

consumers’ purchasing decisions easier, such as good quality pictures and product

characteristics. Indeed, Ballantine (2005) found that the greater amount of product detail

provided, the higher user satisfaction was and Blanco et al. (2010) found that when a product

had an image and text appearing together, then consumers remember more information about

it. In particular, the presentation of product information can invoke positive responses from

users (Blanco et al., 2010). Indeed, the product acquisition process is improved if users have

7

Page 8:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

access to more detailed information about the product, a comparison of prices, availability

and the product’s overall value (Brown, Pope and Voge, 2003). Moreover, many retailers

include product videos on their website in order to create interest and involvement. Product

videos are capable of transmitting information about the product style, colour and fabric and

they can boost customer confidence in the product (Xu et al., 2015), increasing their level of

trust in the product and in the online fashion retailer (Karimov et al., 2011).

2.1.6. Hedonic motivations

Consumers expect to have a more social and interactive online experience in which shared

intelligence can be accumulated and used to aid the decision-making process (Huang and

Benyoucef, 2015). As a result, hedonic aspects need to be considered when designing a

fashion retailer’s website. Online shopping can be viewed as a pleasant experience associated

with fun and enjoyment and so stores that strive to make shopping a fun-filled experience are

visited more often (Scarpi et al., 2014; Ahmad et al., 2017). Indeed, Cyr and Head (2013)

found that users spent more time looking at the hedonic sections of a fashion retailer’s

website than the utilitarian sections. Karimov et al. (2011) also stress the importance of

including social features on retailers’ websites in order to increase users’ trust. Some on the

ways in which Karimov et al. (2011) suggest retailers could do this is by including videos of

sales assistants to help users with their shopping experience, avatars, recommendations and

live chat functions. Research has also found that perceived playfulness has a positive effect

on online shopping adoption (Celik, 2011). Thus, online retailers should add a touch of

humour and fun to their websites to make them more enjoyable and increase consumer

satisfaction.

2.1.7. Webstore image (WI)

Brand image can be defined as the “perceptions about a brand which the brand associations in

consumers’ memory reflect” (Keller, 1993). Research indicates that the purchase intentions

of customers have been influenced by online store image (Verhagen and Van Dolen, 2009).

Webstore image is directly linked with the reputation of that store among customers (Utz et

al., 2012) and can be conditioned by portraying the merchandise according to gender or age

group specification (Lim and Yazdanifard, 2014). Webstore image can be enhanced by

8

Page 9:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

improving the online store recognition factors, areas that depend on marketing strategy and

brand-building (Park and Kim, 2003; Luo et al., 2012). Another measure that enhances

webstore image are online ratings and reviews (Engler et al., 2015; Wang et al., 2018). High

online ratings and reviews have a positive impact on brand and product acceptance. Lastly,

secure transaction and personal information protection improve the online store image and

loyalty towards that store (Thakur and Srivastava, 2015; Blut et al., 2015; Chen et al., 2016).

2.2 The use of MCDM techniques in online retail

In terms of online store selection, different techniques and methodologies have been adopted

by researchers and practicioners, summarized in Table 2. However, the majority of research

applying decision-making approaches in order to analyze e-stores and their prioritisation, has

focused on e-commerce holistically. There is a lack of research related to understanding

customers’ behaviour towards specific market sectors such as electronics, fashion, home

décor and others. The MCDM (Multicriteria Decision Making) approach has been used

extensively to provide a comprehensive solution for the problems in online retailing, as

shown in Table 2.

Table 2 Summary of studies that have assessed online stores using MCDM techniques (Source: Author’s own)

Researcher (year) Methodologies Issues discussedHsu et al. (2010) AHP Online shopping platform comparison in

Taiwan.Kabir et al. (2012) AHP-TOPSIS Online retail performance among 5 alternatives.Chiu et al. (2013) DANP-VIKOR To improve the business of online E-stores.Kalelkar et al. (2014) AHP To understand the dynamics of main factors in

top Online shops of India.Dey et al. (2015) AHP-TOPSIS Online retail evaluation model developedLiu et al (2015) fuzzy AHP E-commerce alternatives have been rankedGhatak et al. (2016) AHP Online retail patronage in IndiaKang et al. (2016) TOPSIS A case study on B2C E-commerce verified by

sensitivity analysis.Masudin et al. (2016) AHP-TOPSIS Two websites were compared for usability

factors.Valmohammadi and Dashti (2016)

Fuzzy ANP and ISM Barriers to implementation of online shopping.

9

Page 10:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Researcher (year) Methodologies Issues discussedSingh et al. (2016). ANFIS-AHP Assessing top E-store in India.Kahraman et al. (2017) fuzzy AHP Selection of B2C marketplace and modeling.Liu et al. (2017). AHP-TOPSIS Evaluation of success factors of Online shops

with examplesSingh et al. (2017) TOPSIS Ranking of critical success factors in online

retailingGupta and Dubey (2018) AHP Adaptability of Indian E-commerce websites.Rouyendegh et al. (2018). AHP-FTOPSIS The performance of three online stores has been

evaluated.Srivastava et al. (2018)

Liang et al., 2017

Ji et al., 2018

Fuzzy AHP and TOPSIS

SVTN-DEMATEL

Regret theory and QUALIFLEX

Discussed online store attributes and buying behavior across gender.

Evaluation of E-commerce website using a case example and checking the robustness of the model using sensitivity analysis

A fuzzy DSS model for item comparison of a case E-commerce

The integrated AHP-VIKOR methodology has been used in diverse research areas due to its

decision-making capabilities, as demonstrated in Table 3.

Table 3. Recent research using integrated AHP-VIKOR methodology

Authors & Year Topic JournalWang et. al., 2019 Selecting sustainable energy conversion technologies for agricultural

residues: A fuzzy AHP-VIKOR based prioritization from life cycle perspective

Resources, Conservation and Recycling

Arar et al., 2019 Office location selection by fuzzy AHP and VIKOR. International Journal of Information and Decision Sciences

Awasthi et. al., 2018 Multi-tier sustainable global supplier selection using a fuzzy AHP-VIKOR based approach.

International Journal of Production Economics

Emeç and Akkaya (2018)

Stochastic AHP and fuzzy VIKOR approach for warehouse location selection problem.

Journal of Enterprise Information Management

Yu et al., 2018 Multi-Criteria Decision Making for PLM Maturity Analysis based on an Integrated Fuzzy AHP and VIKOR Methodology. 

Journal of Advanced Manufacturing Systems

Chander et al., 2018 Design of Decision-Making Techniques Using Improved AHP and VIKOR for Selection of Underground Mining Method.

Recent Findings in Intelligent Computing Techniques

Chatterjee et al., 2017

Unified Granular-number-based AHP-VIKOR multi-criteria decision framework.

Granular Computing

Soner et al., 2017 Application of AHP and VIKOR methods under interval type 2 fuzzy environment in maritime transportation.

Ocean Engineering

Digkoglou et al., 2017

Using AHP and VIKOR to evaluate the hotel industry of eight European countries.

Balkan Region Conference on Engineering and Business Education

Singh et al., 2016 Strategy selection for sustainable manufacturing with integrated AHP-VIKOR method under interval-valued fuzzy environment. 

The International Journal of Advanced Manufacturing Technology

Prasad et al., 2016 Supplier Selection through AHP-VIKOR Integrated Methodology. International Journal of Industrial Engineering

Tian et al., 2016 An integrated AHP and VIKOR approach to evaluating green design 2016 IEEE 13th International

10

Page 11:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

alternatives. Conference on Networking, Sensing, and Control (ICNSC)

Salehi, 2016 An integrated approach of fuzzy AHP and fuzzy VIKOR for personnel selection problem.

Global Journal of Management Studies and Researches

Tadić et al., 2015 Ranking of logistics system scenarios using combined fuzzy AHP-VIKOR model.

International Journal for Traffic and Transport Engineering

Zhu et al., 2015 An integrated AHP and VIKOR for design concept evaluation based on rough number.

 Advanced Engineering Informatics

Rezaie et al., 2014 Evaluating performance of Iranian cement firms using an integrated fuzzy AHP–VIKOR method. 

Applied Mathematical Modelling

Bhosale and Kant, 2014

Selection of best knowledge flow practicing organisation using hybrid fuzzy AHP-VIKOR method. International Journal of Decision Sciences, Risk and Management.

 International Journal of Decision Sciences, Risk and Management

Shokri et al., 2013 An integrated AHP-VIKOR methodology for Facility Layout design.  Industrial Engineering and Management Systems

Dincer ans Hacioglu, 2013

Performance evaluation with fuzzy VIKOR and AHP method based on customer satisfaction in Turkish banking sector.

 Kybernetes

Previous literature highlights that studies have been conducted on individual attributes of

fashion retailers’ websites. The present study will build on this literature in order to see which

attributes should be prioritised for fashion retailers to create a successful business. This study

will contribute to knowledge by creating a holistic approach to online fashion retailing,

classifying all the attributes identified in the literature in terms of their importance for a

successful online retail strategy.

2.3 Research Gap

Extant research has identified issues relating to the selection of online stores (Kabir et al.,

2012; Liu et al., 2015; Rouyendegh et al. 2018), however there is no study to date that has

classified which attributes are the most important in terms of making an online fashion

retailer successful. Furthermore, there is a paucity of research invesitigaing the Indian fashion

retail sector (Mann and Byun, 2011), an aspect addressed in this research in order to

investigate whether there are any other attributes that need to be considered in this context.

Thus, there is a need to develop a framework and identify criteria and sub-criteria for the

prioritization of online fashion stores. The literature review clarifies that most of the studies

on the prioritization of online stores have employed an AHP (Analytical Hierarchy Process)

methodology (Saaty, 1988) and a hybrid approach, AHP-TOPSIS has been the preferred

approach. In an attempt to identify and evaluate the online store factors efficiently, an

integrated AHP-VIKOR framework has been used in this study. VIKOR considers individual

regret minimization and group utility maximization (Liu and Wu, 2012) and it can solve

11

Page 12:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

discrete decision-making problems with conflicting criteria so as to provide a near-to-ideal

solution (Liu et al., 2013).

3. Research Methodology and Framework

The study used an integrated AHP-VIKOR framework for OFR selection. The study adopted

AHP to obtain weights of the factors while VIKOR has been used to select the most feasible

OFR. AHP is one of the popular MCDM (multi-criterion decision making) methodologies

(Satty, 2013) amongst managers because of its subjective opinion (Ishizaka and Labib, 2011).

AHP can be used alone but more reliable results can be achieved by integrating AHP with

other MCDM techniques (Mangla et al., 2016). VIKOR is a compromise solution technique

and an effective tool to rank alternatives (Chatterjee et al., 2010). When compared to similar

technique such as TOPSIS (technique of order preference by similarity to ideal solution),

VIKOR follows individual regret minimization and group utility maximization (Liu and Wu,

2012) and it can solve discrete decision-making problems having conflicting criteria so as to

provide a solution that is close-to-ideal (Liu et al., 2013).

The proposed research framework is used for identifying the criteria of OFR prioritization

and selection. The study used the AHP-VIKOR approach as shown in Fig. 1. There are three

phases in the study and the resulting framework will help decision-makers to select the most

feasible OFR. The research aimed to achieve the following objectives:

a. Determine the criteria for OFR assessment based on the literature and experts’

opinions.

b. Evaluate the factors on which OFR can be prioritized by assessing the relative

importance weight of each factor.

c. Provide the most feasible OFR selection across the available alternatives.

Phase 1: Identification of the criteria, sub-criteria and alternatives for OFR.

The main aim of phase 1 was to finalize the factors that are important for OFR prioritization.

In this phase, an extensive literature review was conducted in order to identify the factors that

are important of OFR selection. Moreover, experts’ opinions have been gathered in order to

assess whether there were any additional factors that were not covered in the literature.

Finally, in Phase 1, the available alternatives for OFR were also identified. From the

literature review and experts’ suggestions, a total of 40 factors were identified and

categorized into 7 dimensions. Thus, criteria were identified based on secondary research

based on extant literature and primary research gained from the opinions of experts.

12

Page 13:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

3.1 AHP methodology

AHP has been a widely used methodology for online retail, supplier selection, and vendor

evaluation (Bandyopadhyay, 2018; Zafar et al., 2018). Steps adopted in AHP methodology

(Saaty, 2013) have been discussed below.

Step 1: Research problem identification. The aim of the research is the identification of OFR

by interpreting various factors that lead customers to choose an online fashion store.

Step 2: Questionnaire construction for data collection: a pairwise comparison between the

factors related to the prioritization of OFR has to be done by experts on a nine-point scale as

given by Saaty (1990), shown in Table 4.

Step 3: Identification of normalized weights for supplier selection criteria. After

normalization of weights, ranking for criteria and dimensions has been done.

Step 4: Consistency evaluation. The consistency ratio (CR) is evaluated for the legitimacy of

the pair-wise comparison. CR is calculated using the mathematical expression CR = CIRI

(Saaty, 2013), where RI represents the Random Index . CR value authenticates the validity of

a pairwise comparison of the decision matrix. Consistency index (CI) is shown in Table 5 and

can be calculated using the formula CI = λmax−nn−1

, where λmaxis Principal Eigen value that

corresponds to highest Eigen value (Saaty, 1990)

Table 4. Significance of score in AHP

Score Definition1 Equally Important3 Moderately important

5 Strongly important

7 Very strongly important

9 Extremely important

2,4,6,8 Intermediate value between two adjacent judgements

Source: Saaty (1990)

Table 5. Random Consistency Index Table

Source: Saaty(1990)

13

Order of matrix (n) 1 2 3 4 5 6 7 8 9 10Random index (RI) 0.00 0.00 0.52 0.89 1.11 1.25 1.32 1.41 1.45 1.49

Page 14:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Phase 2: Application of AHP to compute evaluation criteria, sub-criteria and dimension

weights.

After the approval of the structure of criteria and sub-criteria, the decision-makers are asked

to assign their ratings to estimate the weight of factors involved in the study. On factor

identification, the experts from the case companies assigned ratings in a pairwise comparison

matrix format to find the weights.

3.2 VIKOR methodology

VIKOR stands for VIseKriterijumska Optimizacija I Kompromisno Resenje, which means

Multicriteria Optimization and Compromise Solution. It emphasize on non-commensurable

and conflicting criteria in which the decision-maker looks for a solution that is closest-to-the-

ideal (Opricovic, and Tzeng, 2007). VIKOR has been a preferred choice of this study because

of its advantages. The alternatives determined by the VIKOR technique is closest to the ideal

solution and away from the negative ideal solution having the maximum group utility for

decision-makers (Tong et al., 2007). Also, VIKOR methodology is useful in conditions where

the decision-makers are unable to express their preferences in the beginning of the system

design (Opricovic and Tzeng, 2004). It has been used in the study to evaluate alternatives of

OFR. Various steps involved in the methodology have been discussed below.

Step 1: Linguistic variables (Table 6) used in the study has been rated for the criteria of OFR

selection. Table 4 discusses the scale used for rating linguistic variables so that pairwise

comparison of alternatives can be done.

Step 2: Decision matrix has been identified on the basis of the ratings of experts using Eq.

(1). A = 1k ∑k =1

k

A k (1)

Using Eq. (1) normalization process of decision matrix is done

Step 3: To identify f b¿ and f b

−¿¿ values using Eqs. (2) and (3) to find the best f b¿ and the worst

f b−¿¿ values.

f b¿ = Max (f ab) (2)

f b−¿¿ = Min (f ab) (3)

In the study f b¿ is the positive ideal solution and f b

−¿¿ is the negative ideal solution for the bth

criteria.

14

Page 15:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Step 4: Calculation of Sa and Ra for a = 1, 2,…,m using Eqs (4) and (5).

Sa = ∑b=1

n

W b[( f ¿¿b¿− f ab)/¿¿¿ (4)

Ra= Maxb[W b [( f ¿¿b¿−f ab)/¿¿¿] (5)

Sadepicts the rate of distance of alternative (ath) to the positive ideal solution; Radepicts the

rate of distance of alternative (ath) to negative ideal solution in the compromise programming

method that aids in determining the compromise solutions based on negotiated preferences of

decision makers and W brepresents the weight of each criteria which was calculated using

AHP.

Step 5: Aggregate index, Qa identification for a = 1, 2,….,m by using equation (6) and

finally an alternative that has minimum Qa value for a=1,2,3,…m is the best alternative. This

compromise solution is stable.

Qa = v[(Sa−S¿) / ¿)] +(1−v ) ¿] (6)

where S−¿=Max a Sa S−¿¿ ¿; S¿=Mina Sa S¿; R−¿=Max a R a R−¿¿¿; R¿=Mina Ra R ¿ and the solutions deduced

from max Sa depicts the “maximum group majority” and from min Ra “minimum individual

regret” of the alternative.

Step 6: On the basis of Qa values alternatives are ranked

Step 7: The minimum value of Q is identified on the basis of two conditions as given below.

Condition 1: If Q(OFR(2)) – Q(OFR(1)) >= 1

n−1 then the alternative Q(OFR(1)) depicts an

advantage where OFR(1) and OFR(2) are the alternatives; n is number of alternatives.

Condition 2: When Sa and Ra are top-ranked then the alternative Q (OFR(1)) is constant and

stable in the prioritization process.

Step 8: The best alternative is noted by selecting (A(m)) as the most preferred compromise

solution with the minimum value of Qain regards to the mentioned conditions. m here

indicates the alternatives selection (OFR1, OFR2,.. OFR5).

Table 6. The linguistic scale used to develop pair-wise comparisons.Importance intensity Linguistic Variables 1 Equally Important (EI) 2 Moderately Important (MI)3 Strongly Important (SI)4 Very Strongly Important (VSI) 5 Extremely Important (EXI)

Source: Saaty(1990)

15

Page 16:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

3.2.1. VIKOR application using R

In the study, VIKOR has been used to rank the available alternatives for OFR. The majority

of previous studies using VIKOR as a methodology, calculate it manually using Excel sheet

or Libre software. In the present research, R programming software (Team, 2018) has been

used to apply VIKOR using the R package “MCDM” (Ceballos Martin, 2016). The software

reduces manual calculations and thus the chances of error is eliminated to a great extent.

Phase 3: VIKOR is implemented to select the most efficient OFR amongst alternatives.

In the last step, phase 3, the alternatives are evaluated for the most preferred retailer. This

was done by acquiring the ratings from the decision group. With the use of the VIKOR

technique, a priority ranking of the alternatives has been obtained.

16

Page 17:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Figure 1. Research framework for OFR prioritization (Source: Author’s own)

4. Application of proposed research framework for OFR prioritization

4.1 Finalization of factors that decides the selection of OFR.

The study targets OFR in India and emphasizes the factors that are important for online store

selection. The study is based on an extensive literature review as discussed in the previous

section and on the base of expert (enterprise manager or decision maker) opinions.

Enterprise managers (taken as experts in the study) can take a better decision on the basis of

17

Page 18:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

customer’s review and feedback (Xu et al., 2011). Hence, an experienced expert’s opinion

indirectly reflects the customer’s feedback. In the initial phase, a decision group was formed

that consisted of 8 experts from case companies of online fashion stores in India (a detailed

profile is provided in Table 7) and 3 experts from academia with experience in fashion and

technology. The academic experts have bachelor’s and postgraduate degrees in subjects

related to fashion and marketing, and currently teach and research topics related to online

retailing and apparel. The opinion of the experts was obtained using a matrix comparison and

other details such as the year of the establishment of the OFR and designation were asked. A

individual face-to-face interview was conducted whereby all the details and matrix

comparison on the factors were acquired. In order to understand the status of the OFR from

which the experts have been selected, an Alexa ranking is identified from

http://www.alexa.com/ (Olteanu et al., 2013). See Table 6.

Table 7. Detail of experts from the case companies in the study.  

OFR Address OFR rank in India (2018,

August)

Domain Established Designation (Experts)

Experience (Experts)

           Myntra.com 66 Fashion 2007 Product Manager 5

Ajio.com 468 Fashion and space 2016 Merchandise manager

9

Shoppersstop.com 1177 Fashion and accessories

1991 Vendor Manager 8

Limeroad.com 1227  Fashion and accessories

2012 Sales Manager 5

Koovs.com 2198 Fashion and Lifestyle

2010 Retail Planner 5

Craftsvilla.com 2272 Ethnic wear 2010 Vendor Manager 6

Zivame.com 2954 Women's Intimate wear

2011 Category Manager

7

Voonik.com 2991 Women's Fashion 2013 Manager- Buying 9

OFR rank source: "alexa.com"  

The experts from industry and academia have proficiency in decision-making for online and

fashion retail due to their experience in the domain. The experts’ opinions and the literature

review were synthesized, resulting in the creation of seven criteria and forty evaluation

factors (sub-criteria). Five alternatives for OFR were considered for prioritization. A

structural hierarchy for the problem is shown in Figure 2. The structure has three levels:

Level 1 discusses the goal of the study. Level 2 discusses the main criteria of the research

18

Page 19:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

agenda. Level 3 discusses the exhaustive factors (sub-criteria) and Level 4 discusses the

available alternatives. For details see Figure 2.

Figure 2. Framework for online fashion store (OFR) prioritization among the alternatives

OFR1–OFR5. (Author’s own work)

19

Page 20:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

4.2 AHP application to compute the local weight and global weight of factors.

AHP has been used to compute the weight of factors and categories identified in this study. A

pairwise comparison of the main categories for OFR selection has been conducted by 11

experts. An average value of all 11 opinions by experts for each pairwise comparison has

been taken in the matrix format, as shown in Table 8.

Table 8. Pairwise comparison of main category for OFR selection.

  WA POC PA WF TI HM WI Weight RankWA 1.000 0.530 0.240 0.260 3.200 0.480 0.164 0.049 5POC 1.887 1.000 0.232 0.460 5.300 2.740 0.210 0.088 4PA 4.167 4.310 1.000 2.400 6.800 7.200 0.530 0.258 2WF 3.846 2.174 0.417 1.000 5.800 5.400 0.210 0.151 3TI 0.313 0.189 0.147 0.172 1.000 0.524 0.114 0.025 7

HM 2.083 0.365 0.139 0.185 1.908 1.000 0.152 0.047 6WI 6.098 4.762 1.887 4.762 8.772 6.601 1.000 0.382 1

Principal Eigen Value (λ) = 7.4361, CI = 0.0727; CR=5.51% (Source: Author’s own)

After the pairwise comparison, it was indentified that the categories: Webstore image (WI),

Product attributes (PA) and Webstore facilities (WF) were ranked as the top three in terms of

priority. Although, all the main criteria are important considerations for OFR selection, a

ranking in term of importance can help retailers to focus on the most preferred one.

Furthermore, the seven individual categories were compared pairwise for their factors. An

average of the ratings provided by all eleven experts has been taken in the pairwise

comparison matrix as shown from Table 8.1 to Table 8.7.

A pairwise comparison of all the sub-criteria within the main criteria “Website Attribute”

reveals that the sub-criteria E-store niche (WA6), Homepage design (WA5) and Visual

Design (WA1) are the top three factors. Also, the CI is 0.0613 which is less than the max

limit of 0.1 and CR is 4.94%. Therefore, the results obtained by the pairwise comparison are

consistent and reliable.

Table 8.1. Comparison matrix for the factor “Website Attribute”.

  WA1

WA2

WA3

WA4

WA5

WA6

Weight

Rank

WA1

1.000

4.300

2.300

4.650

0.480

0.260 0.147 3

WA 0.23 1.00 0.35 0.46 0.16 0.12 0.034 6

20

Page 21:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

2 3 0 0 0 4 4WA

30.43

52.85

71.00

03.20

00.22

00.21

4 0.085 4

WA4

0.215

2.174

0.313

1.000

0.153

0.142 0.044 5

WA5

2.083

6.098

4.545

6.527

1.000

0.310 0.249 2

WA6

3.846

8.065

4.673

7.042

3.226

1.000 0.442 1

Principal Eigen Value (λ) = 6.3064, CI = 0.0613; CR=4.94%(Source: Author’s own)

The factors related to “Post order convenience” have been ranked in Table 8.2. The sub-

criteria Flexible return policy (POC4), On-time delivery (POC3) and Easy order cancellation

(POC5) are ranked in the top three positions. CI = 0.0752 and CR=6.72% and thus, the

results are reliable and consistent.

Table 8.2. Comparison matrix for the factor “Post order convenience”.  PO

C1POC2

POC3

POC4

POC5

Weight

Rank

POC1

1.000

3.200

0.220

0.164

0.310 0.071 4

POC2

0.313

1.000

0.210

0.118

0.250 0.039 5

POC3

4.545

4.762

1.000

0.320

3.200 0.257 2

POC4

6.098

8.503

3.125

1.000

4.200 0.497 1

POC5

3.226

4.000

0.313

0.238

1.000 0.136 3

Principal Eigen Value (λ) = 5.301, CI = 0.0752; CR=6.72%(Source: Author’s own)

The main category “Product attributes” has six sub-criteria out of which the top three sub-

criteria according to the AHP methodology are Price (PA6), Product availability (PA1) and

Wide range and categories (PA3). The Consistency Ratio (CR) is less than 10% and CI is

also less than 0.1 so the decision-making using AHP is consistent and valid.

Table 8.3. Comparison matrix for the factor “Product attributes”.  PA1 PA2 PA3 PA4 PA5 PA6 Weight Rank

PA1 1.000 4.300 2.20

0 6.500 5.400 0.470 0.265 2

PA2 0.230 1.000 0.45

0 4.600 2.800 0.240 0.095 4

PA3 0.450 2.220 1.00

0 6.200 4.600 0.260 0.160 3

PA 0.150 0.220 0.16 1.000 0.340 0.12 0.029 6

21

Page 22:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

4 0 0PA5 0.190 0.360 0.22

0 2.940 1.000 0.163 0.051 5

PA6 2.130 4.170 3.85

0 8.330 6.130 1.000 0.401 1

Principal Eigen Value (λ) = 6.3017, CI = 0.0603; CR=4.87%(Source: Author’s own)

There are seven sub-criteria in the main category “Webstore Facilities”. An AHP

methodology was applied to make a pairwise comparison. The results of the application are

consistent and reliable as the Consistency Index (CI) is 0.0931. The top three sub-criteria

identified in the study are Low cost shipping (WF5), Multiple payment options (WF6) and

Various delivery options (WF7).

Table 8.4. Comparison matrix for the factor “Webstore Facilities”.  WF1 WF2 WF3 WF4 WF5 WF6 WF7 Weight Rank

WF1 1.000 4.300 0.524 3.200 0.162 0.264 0.254 0.067 5

WF2 0.233 1.000 0.260 0.310 0.119 0.144 0.160 0.024 7

WF3 1.908 3.846 1.000 4.100 0.280 0.246 0.250 0.089 4

WF4 0.313 3.226 0.244 1.000 0.143 0.162 0.264 0.039 6

WF5 6.173 8.403 3.571 6.993 1.000 2.300 3.800 0.368 1

WF6 3.788 6.944 4.065 6.173 0.435 1.000 2.300 0.241 2

WF7 3.937 6.250 4.000 3.788 0.263 0.435 1.000 0.171 3

Principal Eigen Value (λ) = 7.5585, CI = 0.0931; CR=7.05%(Source: Author’s own)

Comparison matrix for the main criteria “Tactile Information” is provided in Table 8.5. The

top three sub-criteria of the AHP pairwise comparison by decision-makers are Multiple

Enlarged images (TI1), Modelled product (TI2) and Extensive product details (TI4). The

comparison is consistent and reliable as the value of C.I is less than 0.1

` Table 8.5 Comparison matrix for the factor “Tactile Information”.  TI1 TI2 TI3 TI4 TI5 Weight Rank

TI1 1.000 3.200 7.800 4.230 6.800 0.500 1TI2 0.313 1.000 5.700 3.400 5.800 0.274 2TI3 0.128 0.175 1.000 0.246 0.320 0.038 5TI4 0.236 0.294 4.065 1.000 2.400 0.120 3TI5 0.147 0.172 3.125 0.417 1.000 0.068 4Principal Eigen Value (λ) = 5.2876, CI = 0.0719; CR=6.42%(Source: Author’s own)

22

Page 23:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

In the main category, “Hedonic motivation”, the three top sub-criteria are identified as

Special sales and deals (HM5), Discounts or cashback (HM3) and Previous experience with

the shop (HM6). The matrix is made using a pairwise comparison AHP methodology by

decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and

consistent.

Table 8.6. Comparison matrix for the factor “Hedonic motivations”.  HM

1HM

2HM

3HM

4HM

5HM

6Weig

htRan

kHM

11.00

00.52

00.26

03.20

00.14

40.26

0 0.058 5

HM2

1.923

1.000

0.360

4.300

0.170

0.560 0.091 4

HM3

3.846

2.778

1.000

5.600

0.510

3.100 0.244 2

HM4

0.313

0.233

0.179

1.000

0.121

0.176 0.030 6

HM5

6.944

5.882

1.961

8.264

1.000

4.800 0.439 1

HM6

3.846

1.786

0.323

5.682

0.208

1.000 0.137 3

Principal Eigen Value (λ) = 6.2945, CI = 0.0589; CR=4.75% (Source: Author’s own)

Finally, the main factor “Webstore image” has also been compared pairwise and the matrix is

reliable as CI < 0.1. The top three sub-criteria are identified as Online shop recognition WI3,

Reputation of store WI1 & Online ratings and review WI4.

Table 8.7. Comparison matrix for the factor “Webstore image”.  WI1 WI2 WI3 WI4 WI5 Weight RankWI1 1.000 4.300 0.320 3.200 6.800 0.267 2WI2 0.233 1.000 0.162 0.530 3.100 0.074 4WI3 3.125 6.173 1.000 3.800 8.200 0.489 1WI4 0.313 1.887 0.263 1.000 6.800 0.136 3WI5 0.147 0.323 0.122 0.147 1.000 0.034 5Principal Eigen Value (λ) = 5.2656, CI = 0.0664; CR=5.93% (Source: Author’s own)

After obtaining the weight of the categories and factors, the global weight can be calculated

by multiplying the category weight and factor weight. Based on the global weight, the

ranking of the factors can be obtained as shown in Table 9.

Table 9. Global weight and rank for the factors of OFR selection.

23

Page 24:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Category for OFR selection

Relative weight of category

Factors

Relative weight of factors

Relative Rank

Global weight

Global Rank

WA 0.049

WA1 0.147 3 0.0072 25WA2 0.034 6 0.0017 38WA3 0.085 4 0.0041 31WA4 0.044 5 0.0021 36WA5 0.249 2 0.0122 20WA6 0.442 1 0.0216 14

             

POC 0.088

POC1 0.071 4 0.0062 28POC2 0.039 5 0.0034 33POC3 0.257 2 0.0226 13POC4 0.497 1 0.0437 7POC5 0.136 3 0.0120 21

             

PA 0.258

PA1 0.265 2 0.0685 4PA2 0.095 4 0.0245 12PA3 0.160 3 0.0412 8PA4 0.029 6 0.0074 24PA5 0.051 5 0.0130 17PA6 0.401 1 0.1033 2

             

WF 0.151

WF1 0.067 5 0.0102 23WF2 0.024 7 0.0036 32WF3 0.089 4 0.0135 16WF4 0.039 6 0.0059 29WF5 0.368 1 0.0555 5WF6 0.241 2 0.0363 9WF7 0.171 3 0.0258 11

             

TI 0.025

TI1 0.500 1 0.0127 19TI2 0.274 2 0.0070 26TI3 0.038 5 0.0010 40TI4 0.120 3 0.0031 34TI5 0.068 4 0.0017 37

             

HM 0.047

HM1 0.058 5 0.0027 35HM2 0.091 4 0.0043 30HM3 0.244 2 0.0116 22HM4 0.030 6 0.0014 39HM5 0.439 1 0.0208 15HM6 0.137 3 0.0065 27

             

WI 0.382

WI1 0.267 2 0.1020 3WI2 0.074 4 0.0284 10WI3 0.489 1 0.1866 1WI4 0.136 3 0.0519 6WI5 0.034 5 0.0128 18

Source: Author’s own

4.3 VIKOR application to prioritize the online fashion store.

24

Page 25:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

After obtaining the weights of each factor in terms of their importance for online fashion

store selection, the research attempts to estimate the best possible alternative. The

prioritization and selection of the most feasible alternatives are done using the VIKOR

method. The data for the VIKOR has been collected from experts and the average value of all

pairwise comparison has been used in the study. The aggregate of expert opinions (see Table

10) are calculated using the equation 1.

Table 10. Aggregate comparison matrix for alternativesAlternative

s WA1 WA2 WA3 WA4 WA5 - - WI3 WI4 WI5

OFR1 3.2 3.5 1.25 3.2 3.24 - - 3.4 2.6 2.5OFR2 4.1 1.75 3.5 2.8 2.2 - - 3.4 2.4 2.4OFR3 2.6 4.2 2.8 3.8 4.1 - - 3.6 3.8 2.2OFR4 4.2 2.25 4.2 1.5 1.5 - - 1.6 3.6 3.6OFR5 3.6 3.6 3.4 2.4 2.8 - - 3.6 2.8 3.8

(Source: Author’s own)

On obtaining the weight for factors and the comparison matrix for alternatives, the VIKOR

methodology using R was applied. A screenshot of the result of the VIKOR analysis as

calculated in R is shown in Figure 3 and the results are rewritten in Table 11.

Figure 3. Screenshot of R output for VIKOR analysis.

Table 11. VIKOR analysis for ranking of alternativesAlternatives S R Q Ranking

OFR1 0.5241 0.1033 0.4773 4OFR2 0.4662 0.1020 0.4112 3OFR3 0.2328 0.0685 0.0326 1OFR4 0.7072 0.1866 1.0000 5OFR5 0.3488 0.0603 0.1222 2

(Source: Author’s own)

In the study, “S” depicts the positive ideal solution, “R” tells the negative ideal solution and

“Q” indicates the optimal compromise solution. On VIKOR application the descending order

25

Page 26:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

of ranks has been obtained for OFR which are as follows: OFR3 > OFR5 > OFR2 > OFR1 >

OFR4. OFR3 has been identified as the most feasible and efficient alternative.

5. Results and Discussion

The ranking of the main criteria and factors for OFR selection for the case companies are

displayed in Table 8. For online fashion store selection, the category Webstore image (WI)

got the maximum weight (0.382) followed by Product attributes (PA) (0.258), Webstore

facilities (WF) (0.151) and others. The factors that ranked first within their categories are E-

store niche (WA6) (0.442), Flexible return policy (POC4) (0.497), Price (PA6) (0.401), Low

cost shipping (WF5) (.368), Multiple Enlarged images TI1 (0.500), Special sales and deals

(HM5) (0.439) and Online shop recognition (WI3) (0.489).

The top five factors identified for case companies in the analysis are Online shop recognition

(WI3), Price (PA6), Reputation of the store (WI1), Product availability (PA1) and Low-cost

shipping (WF5). Also, the five factors that got the least priority for OFR selection are

Responsive Web Design (WA4), Product video (TI5), Navigation Design (WA2), Shopping

fun and enjoyment (HM4) and Visual Merchandise (TI3).

The “Webstore Image” dimension holds the first position for OFR selection. Research

suggests that webstore image influences the purchasing behavior of customers (Chen and

Teng, 2013; Van der Heijden and Verhagen, 2004). There were five factors within this

category and the factor “Online shop recognition” (WI3) got the topmost priority within the

group. Online shop recognition defines the customer’s ability to recall a particular online

store for a certain product category (Park and Kim, 2003). Store loyalty is an important factor

for the fashion industry so this factor plays a vital role in store selection. The second rank

factor in this category is “Reputation of the store” (WI1) which got the third rank in global

ratings. Consumer purchase intention are directly related to the reputation of the online store

(Kim and Lennon, 2013), therefore OFRs must work on store attributes that enhance the

reputation of their store.

The “Product attribute” category obtained the second rank in the study according to the

experts’ suggestion by case companies. Price (PA6) received the first rank in the category

and second rank in the global ratings. Price has been an instrumental factor in consumers’

26

Page 27:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

choice of fashion store (Gugnani and Choudhary, 2017). The next factor on the rating scale

was “Product availability” (PA1) which has been ranked fourth on global scale rating. Due to

the diverse product range in fashion assortments, their availability at a store can significantly

improve the perception of customers towards that shop. Thus, a higher level of product

availability in fashion retailing increases customer demand (Namin et al., 2017).

“Webstore facilities” (0.151) was ranked as the third category for OFR selection. The most

preferred factor in this category was “Low-cost shipping” (WF5). In a study for online store

repurchase intention amongst customers, “shipping charges” was identified as one of the

most important factors that influence repurchase intention (Roy Dholakia and Zhao, 2010).

The second most important factor that defines webstore facilities is “Multiple payment

options” (WF6). Experts suggested that multiple payment options like cash on delivery

(COD), wallets, coupons and other formats are very important for customer convenience and

purchase intention.

The category “Post order convenience” ranked after Webstore facility on the rating scale and

experts also gave due importance to this category. The prime factor found in this category is a

Flexible return policy (POC4). Research highlights the importance of an easy return policy in

online fashion retailing (Chang et al., 2013; Oghazi et al., 2018). The next important factor

identified within the category is on-time delivery (POC3). Experts emphasize that fashion

purchases are usually time-pressured as customers purchase products for specific occasions.

Therefore, if the item is delivered late then it may no longer be of any use to the consumer,

resulting in the item being returned. Thus, research emphasizes the importance of on-time

delivery (Lawrence and Tar, 2010; Roy Dholakia and Zhao, 2010; Hasan, 2016; Cao et al.,

2018).

The fifth category that is important for online fashion store selection is “Webstore

Aesthetics” (WA). This category deals with the appearance and functionality of the webstore.

Research highlights the importance of webstore aesthetics for e-store success (Luo et al.,

2012). According to experts, E-store niche (WA6) is the most important criteria in webstore

aesthetics. E-store niche gives the customer an opinion about the choice of product they are

looking for. E-store niche can be built by designing the website to appeal to a specific gender,

age group, income class and product category. The second rank in this category is homepage

27

Page 28:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

design (WA5). Homepage design plays an important role in retaining the customer as it

delivers the information sought by them (Kluge et al., 2013; Yoo and Kim, 2014).

The last two categories which are vital for OFR selection as per case companies are “Hedonic

motivations (HM)” and “Tactile Information (TI)”. Within both categories, the top factors are

“Special sales and deals” (HM5) and “Multiple enlarged images” (TI1). Experts suggested

that special sales and deals are linked to hedonic motivations (i.e value shopping) and that

they encourage customers to purchase (Arnold and Reynolds, 2003), an aspect that is very

important in Indian fashion retailing. Researchers have emphasized the importance of product

information provided by multiple enlarged images (Kim and Lennon, 2010; Song and Kim,

2012; Verhagen et al., 2013). Indeed, fashion shopping, the minute details of the product are

important to the customer as they enhance the tangible effects, thus, “multiple enlarged

images” improves the haptic information of fashion products.

Although it is difficult to determine and develop a list of factors crucial for an online fashion

retailer (OFR), the suggested research framework will be helpful for practitioners in order to

understand customer preferences as suggested by experts in a logical way. The study used the

integrated AHP-VIKOR methodology to clearly explain the factors and select the best

possible alternative amongst the five options. VIKOR analysis explained the rankings of the

most favourable OFR attributes whilst simultaneously acknowledging the importance of

factors identified using AHP. The decreasing order of alternatives is OFR3 > OFR5 > OFR2>

OFR1> OFR4, as shown in Table 10.

6. Sensitivity Analysis.

The outcome of the sensitivity analysis depicts the robustness and stability of the framework.

Sensitivity analysis helps to identify the variation in the rank of alternatives when the value

of maximum group utility is varied from v= 0.1 to v=1.0 (Luthra et al., 2017). The solution is

stable within a decision-making process, for voting by a majority rule v>0.5 is used, for

consensus v 0.5 and with veto’ v < 0.5. In the study v is the weight of strategy adopted in

decision-making, also known as ‘‘the maximum group utility’’ (Opricovic and Tzeng, 2004).

In the analysis, it can be seen that the rank of OFR1, OFR2, and OFR4 remain constant for all

the values of v (0.1 to 1.0). Also, OFR3 and OFR5 obtained a constant ranking of 1 and 2

28

Page 29:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

respectively, for other than two values of v (0.1 and 0.2) as shown in Figure 4. This confirms

the stability of our model as it can be seen in Table 12.

OFR3, OFR5, and OFR2 are the preferred choices of OFR by customers as suggested by the

online fashion industry experts.

Table 12. Sensitivity analysis for online fashion store prioritization

Alternatives Q at v = 0.1 Rank Q at v = 0.2 Rank Q at v = 0.3 Rank Q at v = 0.4 Rank Q at v = 0.5 RankOFR1 0.368 4 0.395 4 0.423 4 0.450 4 0.477 4OFR2 0.347 3 0.363 3 0.379 3 0.395 3 0.411 3OFR3 0.059 2 0.052 2 0.046 1 0.039 1 0.033 1OFR4 1.000 5 1.000 5 1.000 5 1.000 5 1.000 5OFR5 0.024 1 0.049 1 0.073 2 0.098 2 0.122 2Alternatives Q at v = 0.6 Rank Q at v = 0.7 Rank Q at v = 0.8 Rank Q at v = 0.9 Rank Q at v = 1.0 RankOFR1 0.505 4 0.532 4 0.559 4 0.587 4 0.614 4OFR2 0.427 3 0.444 3 0.460 3 0.476 3 0.492 3OFR3 0.026 1 0.020 1 0.013 1 0.007 1 0.000 1OFR4 1.000 5 1.000 5 1.000 5 1.000 5 1.000 5OFR5 0.147 2 0.171 2 0.196 2 0.220 2 0.244 2

(Source: Author’s own)

29

Page 30:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

v = 0.1 v = 0.2 v = 0.3 v = 0.4 v = 0.5 v = 0.6 v = 0.7 v = 0.8 v = 0.9 v = 1.00

1

2

3

4

5

Ranking of OFS1-5 for v = 0.1 to v = 1.0

OFS1 OFS2 OFS3 OFS4 OFS5

Axis Title

Rank

Figure 4. Sensitivity Analysis. (Author’s own work)

7. Implications

There are several key implications of this study. Existing research focuses on online retail

selection attributes and their comparison (Hsu et al., 2010; Liu et al., 2015; Kabir et al., 2012;

Masudin et al., 2016; Rouyendegh et al., 2018). The present study builds on this literature and

applies these attributes to the Indian online fashion retailing context in order to assess

whether there are any unique aspects to this market. Moreover, the present study goes further

by classifying and ranking all the different online retailing aspects to uncover the most

important areas for fashion retailers to focus on when building a successful online strategy.

Theoretically, the study identifies the factors for OFR selection which are different from

online stores in another domain. The findings can be used by academics and practitioners to

study online fashion retailing in order to gain the competitive edge required for success. The

study discovered new factors that are unique to online fashion retailers based on expert

interviews, and these factors can be tested in future research in order to investigate this

further. Factors suggested and validated by industry and academic experts for OFR selection

used in this study are e-store niche, easy order cancellation, the latest trend, style guide,

30

Page 31:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

branded products, multiple payment options, celebrity endorsement, special deals and

previous experience with the store.

The study also has several practical implications, useful for online fashion retailers. Firstly,

the model evaluated in this study can be used by fashion retailers to enhance consumers’

online shopping experience. It can help them to upgrade their services and product attributes

in order to improve customer satisfaction and retention. Secondly, factors and their weight

identified in the study can be used by the management of existing online fashion stores in

order to make improvements to their webstore attributes. The heavily weighted factors can be

emphasized and worked upon to improve the status of the OFR. Thirdly, new entrants in

online fashion retail can use this model to prioritize factors and serve customers efficiently.

Further, the weights identified can be used to emphasize the most desirable factors for

customers in order to improve satisfaction towards OFR. Fourthly, market researchers and

trend analysts can use this model due to its robustness and stability to rank and prioritize the

OFR.

8. Conclusion

Studies have investigated online store attributes and buying behaviour (Srivastava et al.,

2018), assessed online stores and ranked them (Rouyendegh et al., 2018; Singh et al., 2016).

and identified and ranked online retail performance (Dey et al., 2015; Kabir et al., 2012).

The present study builds on the extant literature and provides the following novel findings:

8 new factors that are contributed by experts

8 new attributes of online fashion retail stores are identified based on expert

interviews: E-store niche (WA6); Easy order cancellation (POC5); Latest trend (PA4);

Branded products (PA5); Style guide (WF4); Multiple payment options (WF6);

Special sales and deals (HM5); Previous experience with the shop (HM6).

The seven main criteria: Webstore Aesthetics (WA), Post order convenience (POC),

Product attributes (PA), Webstore facilities (WF), Tactile Information (TI), Hedonic

motivations (HM) and Webstore image (WI) cover almost every aspect on the basis of

which OFR can be assessed. Previous research has missed some of these important

categories.

31

Page 32:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Moreover, in terms of Indian context this is the first study, to the author’s knowledge,

that provides data from decision-makers, exclusively from the prominent online

fashion retailers of India.

Table 13. provides a brief overview of the comparison of current study with respect to

previous studies.

Table 13. Comparison of current study with previous study in online retail

Authors (year) Issues discussed Methodologies

Current Study 40 sub-criteria are identified and prioritised for evaluating OFR and the most preferred alternatives of OFR are ranked AHP-VIKOR

Srivastava et al. (2018) Discussed online store attributes and buying behavior across gender. Fuzzy AHP and TOPSIS

Rouyendegh et al. (2018). The performance of three online stores has been evaluated. AHP-FTOPSIS

Liu et al. (2017). Evaluation of success factors of Online shops with examples AHP-TOPSIS

Kahraman et al. (2017) Selection of B2C marketplace and modeling. fuzzy AHP Singh et al. (2016). Assessing top E-store in India. ANFIS-AHPValmohammadi and Dashti (2016) Barriers to implementation of online shopping. Fuzzy ANP and ISM

Masudin et al. (2016) Two websites were compared for usability factors. AHP-TOPSISLiu et al (2015) E-commerce alternatives have been ranked fuzzy AHP Dey et al. (2015) Online retail evaluation model developed AHP-TOPSIS

Kalelkar et al. (2014) To understand the dynamics of main factors in top Online shops of India. AHP

Chiu et al. (2013) To improve the business of online E-stores. DANP-VIKOR Kabir et al. (2012) Online retail performance among 5 alternatives. AHP-TOPSIS

(Source: Author’s own)

Online fashion retailing has grown exponentially in the past two decades and is now starting

to gain huge traction in India. Yet the highly competitive nature of it means that fashion

retailers need to provide a superior online shopping experience for their customers in order to

be successful. This study identified a total of 40 factors, divided into seven categories, that

fashion retailers need to address in order to be successful, and then prioritized these in order

of their importance and significance. This has filled a gap in the academic literature as no

previous study has ranked all the factors relevant to creating a successful e-commerce store.

The model created using an integrated AHP-VIKOR methodology can be used by

practioners when developing their online fashion business in order to help them prioritize the

areas that are the most important in terms of a successful strategy.

32

Page 33:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

There are several limitations to the study. The study is exclusive to the fashion industry

(apparel, fashion accessories, shoes) so the findings may not be generalizable to other product

categories such as electronics, books and automobiles. Although 40 factors have been

identified, there is a possibility that other relevant factors could have been missed.

Furthermore, the cases discussed are based in India and so the findings may be limited to the

Indian market. Future research could be conducted to compare these findings to other

countries and cultures.

Future research could also be conducted using different MCDM techniques like ISM and

DEMATEL to identify the interrelationship, strength of relationship and direction among the

factors. Further PROMETHEE and TOPSIS may be used for OFR selection and

prioritization. The fuzzy factor in the study has not been considered so fuzzy-based approach

can be applied in future. The factors that are similar could be consolidated to a fewer number

of factors using EFA (Exploratory Factor Analysis) and the model identified in the study can

be validated using statistical modelling techniques like SEM (Structural Equation Modelling).

References:

Ahmad, A., Rahman, O., and Khan, M. N. (2017). Exploring the role of website quality and hedonism in the formation of e-satisfaction and e-loyalty: Evidence from internet users in India. Journal of Research in Interactive Marketing, 11(3), 246-267.

Arar, T., Karaoğlan, S., and Dirik, C. (2019). Office location selection by fuzzy AHP and VIKOR. International Journal of Information and Decision Sciences, 11(1), 36-54.

Arnold, M. and Reynolds, K. (2003). “Hedonic shopping motivations”. Journal of Retailing, Vol.79, pp. 77-95.

Awasthi, A., Govindan, K., and Gold, S. (2018). Multi-tier sustainable global supplier selection using a fuzzy AHP-VIKOR based approach. International Journal of Production Economics, 195, 106-117.

Baek, E., Choo, H. J., Yoon, S. Y., Jung, H., Kim, G., Shin, H., and Kim, H. (2015). An exploratory study on visual merchandising of an apparel store utilizing 3D technology. Journal of Global Fashion Marketing, 6(1), 33-46.

Ballestar, M. T., Grau-Carles, P., and Sainz, J. (2016). Consumer behavior on cashback websites: Network strategies. Journal of Business Research, 69(6), 2101-2107.

33

Page 34:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Bandyopadhyay, N. (2018). Prioritising retail service quality determinants: a study in the context of India. International Journal of Business Excellence, 14(4), 486-498.

Bhosale, V. A., and Kant, R. (2014). Selection of best knowledge flow practicing organisation using hybrid fuzzy AHP-VIKOR method. International Journal of Decision Sciences, Risk and Management, 5(3), 234-262.

Blanco, C. F., Sarasa, R. G., and Sanclemente, C. O. (2010). Effects of visual and textual information in online product presentations: looking for the best combination in website design. European Journal of Information Systems, 19(6), 668-686.

Blazquez Cano, M. , Perry, P., Ashman, R., and Waite, K. (2017). The influence of image interactivity upon user engagement when using mobile touch screens. Computers in Human Behavior, 77 (2017), 406-412.

Blut, M., Chowdhry, N., Mittal, V., and Brock, C. (2015). E-service quality: A meta-analytic review. Journal of Retailing, 91(4), 679-700.

Boardman, R., and McCormick, H., (2019). The Impact Of Product Presentation On Decision-Making And Purchasing. Qualitative Market Research, 22(3)

Cao, Y., Ajjan, H., and Hong, P. (2018). Post-purchase shipping and customer service experiences in online shopping and their impact on customer satisfaction: An empirical study with comparison. Asia Pacific Journal of Marketing and Logistics, 30(2), 400-416.

Ceballos Martin, B.A. (2016). MCDM: Multi-Criteria Decision Making Methods for Crisp

Celik, H., (2011). ‘Influence of social norms, perceived playfulness and online shopping anxiety on customers’ adoption of online retail shopping: An empirical study in the Turkish context’, International Journal of Retail & Distribution Management, 39 (6), pp. 390-413.

Chaffey, D. (2015) Digital Business and E-commerce Management Strategy. Implementation and Practice. 6th edn. Harlow: Pearson Education Limited.

Chander, B. B., Gorai, A. K., and Jayantu, S. (2018). Design of Decision-Making Techniques Using Improved AHP and VIKOR for Selection of Underground Mining Method. In Recent Findings in Intelligent Computing Techniques (pp. 495-504). Springer, Singapore.

Chang, M. K., Cheung, W., and Tang, M. (2013). Building trust online: Interactions among trust building mechanisms. Information and Management, 50(7), 439-445.

Chatterjee, K., and Kar, S. (2017). Unified Granular-number-based AHP-VIKOR multi-criteria decision framework. Granular Computing, 2(3), 199-221.

Chatterjee, P., Athawale, V. M., and Chakraborty, S. (2010). Selection of industrial robots using compromise ranking and outranking methods. Robotics and Computer-Integrated Manufacturing, 26(5), 483-489.

Chen, H. M., Wu, C. H., Tsai, S. B., Yu, J., Wang, J., and Zheng, Y. (2016). Exploring key factors in online shopping with a hybrid model. SpringerPlus, 5(1), 2046.

34

Page 35:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Chen, M. Y., and Teng, C. I. (2013). A comprehensive model of the effects of online store image on purchase intention in an e-commerce environment. Electronic Commerce Research, 13(1), 1-23.

Chiu, W. Y., Tzeng, G. H., and Li, H. L. (2013). A new hybrid MCDM model combining DANP with VIKOR to improve e-store business. Knowledge-Based Systems, 37, 48-61.

Cho, H. (2012). Consumer Perceptions of Online Apparel Customization: An Exploratory Study. In Fashion Supply Chain Management: Industry and Business Analysis (pp. 286-302). IGI Global.

Cho, H., and Fiorito, S. S. (2009). Acceptance of online customization for apparel shopping. International Journal of Retail and Distribution Management, 37(5), 389-407.

CRISIL (2018). E-retail market size to rise 2.5x in 3 years. https://www.crisil.com/content/dam/crisil/our-analysis/reports/Research/documents/2018/february/e-retail-market-size-to-rise-2dot5x-in-3-years.pdf (accessed 5 April, 2018).

Cyr, D., and Head, M., (2013). ‘The Impact of task framing and viewing timing on user website perceptions and viewing behaviour’, International Journal of Human-Computer Studies, 71, pp. 1089-1102.

Das, G., Mukherjee, A., and Smith, R. J. (2018). The Perfect Fit: The Moderating Role of Selling Cues on Hedonic and Utilitarian Product Types. Journal of Retailing.

Data. R package version 1.2. https://CRAN.R-project.org/package=MCDM

Dey, S., Jana, B., Gourisaria, M. K., Mohanty, S. N., and Chatterjee, R. (2015). Evaluation of Indian B2C Online shopping websites under multi criteria decision-making using fuzzy hybrid technique. International Journal of Applied Engineering Research, 10(9), 24551-24580.

Digkoglou, P., Dragoslis, A., Papathanasiou, J., and Kostoglou, V. (2017, December). Using AHP and VIKOR to evaluate the hotel industry of eight European countries. In Balkan Region Conference on Engineering and Business Education (Vol. 3, No. 1, pp. 8-13). De Gruyter Open.

Dincer, H., and Hacioglu, U. (2013). Performance evaluation with fuzzy VIKOR and AHP method based on customer satisfaction in Turkish banking sector. Kybernetes, 42(7), 1072-1085.

Emeç, Ş., and Akkaya, G. (2018). Stochastic AHP and fuzzy VIKOR approach for warehouse location selection problem. Journal of Enterprise Information Management, 31(6), 950-962.

Engler, T. H., Winter, P., and Schulz, M. (2015). Understanding online product ratings: A customer satisfaction model. Journal of Retailing and Consumer Services, 27, 113-120.

35

Page 36:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Fang, J., George, B., Shao, Y., and Wen, C. (2016). Affective and cognitive factors influencing repeat buying in e-commerce. Electronic Commerce Research and Applications, 19, 44-55.

Flanagin, A. J., Metzger, M. J., Pure, R., Markov, A., and Hartsell, E. (2014). Mitigating risk in ecommerce transactions: perceptions of information credibility and the role of user-generated ratings in product quality and purchase intention. Electronic Commerce Research, 14(1), 1-23.

Ganguly, B., Dash, S. B., Cyr, D., and Head, M. (2010). The effects of website design on purchase intention in online shopping: the mediating role of trust and the moderating role of culture. International Journal of Electronic Business, 8(4-5), 302-330.

Ghatak, R. R., Singhi, R., and Bansal, S. (2016). Online Store Selection Attributes and Patronage Intentions: An Empirical Analysis of the Indian E-Retailing Industry. Indian Journal of Science and Technology, 9(44).

Gugnani, R., and Choudhary, A. (2017). Web Shopping Adoption by Female Web Browsers for Apparel Shopping in India. FIIB Business Review, 6(4), 48-59.

Gupta, S., and Dubey, S. K. (2018). Adaptability Evaluation of E-commerce Websites in Indian Perspective. In Intelligent Communication, Control and Devices (pp. 847-854). Springer, Singapore.

Ha, Y., and Lennon, S. J. (2010). Online visual merchandising (VMD) cues and consumer pleasure and arousal: Purchasing versus browsing situation. Psychology and Marketing, 27(2), 141-165.

Ha, Y., Kwon, W.S., and Lennon, S.J. (2007), ‘Online visual merchandising (VMD) of apparel Shopping Experience in an Online Store”. Journal of Interactive Marketing, 25, pp. 159-168.

Hasan, B. (2016). Perceived irritation in online shopping: The impact of website design characteristics. Computers in Human Behavior, 54, 224-230.

Heath, M. (2017). The effect of multi-device design on website efficiency and user preference (Master's thesis).

Hsu, C. H., Yang, C. M., Chen, T. C., and Chen, C. Y. (2010, June). Applying AHP method select online shopping platform. In Service Systems and Service Management (ICSSSM), 2010 7th International Conference on (pp. 1-5). IEEE.

Huang, Z., Benyoucef, M., (2015). ‘User preferences of social features on social commerce websites: An empirical study’, Technological Forecasting and Social Change, 95, pp. 57–72

Huyghe, E., Verstraeten, J., Geuens, M., and Van Kerckhove, A. (2017). Clicks as a healthy alternative to bricks: how online grocery shopping reduces vice purchases. Journal of Marketing Research, 54(1), 61-74.

36

Page 37:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Ishizaka, A., and Labib, A. (2011). Review of the main developments in the analytic hierarchy process. Expert systems with applications, 38(11), 14336-14345.

Izogo, E. E., and Jayawardhena, C. (2018). Online shopping experience in an emerging e-retailing market. Journal of Research in Interactive Marketing, 12(2), 193-214.

Ji, P., Zhang, H. Y., and Wang, J. Q. (2018). A Fuzzy decision support model with sentiment analysis for items comparison in e-commerce: The case study of PConline. com. IEEE Transactions on Systems, Man, and Cybernetics: Systems.

Kabir, G., Ahsan, M., and Hasin, A. (2012). Framework for benchmarking online retailing performance using fuzzy AHP and TOPSIS method. International Journal of Industrial Engineering Computations, 3(4), 561-576.

Kahn, B. E. (2017). Using visual design to improve customer perceptions of online assortments. Journal of retailing, 93(1), 29-42.

Kahraman, C., Onar, S. Ç., and Öztayşi, B. (2017). B2C marketplace prioritization using hesitant fuzzy linguistic AHP. International Journal of Fuzzy Systems, 1-14.

Kalelkar, G. R., Kumbhare, G., Mehta, V., and Kar, A. K. (2014). Evaluating E-Commerce portals from the perspective of the end user–A group decision support approach. In Advances in Signal Processing and Intelligent Recognition Systems (pp. 107-117). Springer, Cham.

Kang, D., Jang, W., and Park, Y. (2016). Evaluation of e-commerce websites using fuzzy hierarchical TOPSIS based on ES-QUAL. Applied Soft Computing, 42, 53-65.

Karimov, F., Brengman, M., Van Hove, L., (2011). ‘The Effect Of Website Design Dimensions On Initial Trust: A Synthesis Of The Empirical Literature’, Journal of Electronic Commerce Research, 12 (4), pp.272-280,282-301

Keller, K. L. (1993) ‘Conceptualizing , Measuring , and Managing Customer-Based Brand Equity’, the Journal of Marketing, 57(1), pp. 1–22.

Kempen, E., Kasambala, J., and Toerien, E. (2015). A conceptual framework of e-fashion shopping intent. The Retail and Marketing Review, 11(1), 23-43.

Kevin Chiang, W. Y., and Li, Z. (2010). An analytic hierarchy process approach to assessing consumers' distribution channel preference. International Journal of Retail and Distribution Management, 38(2), 78-96.

Khosla, S. (2017). E-Commerce Boom in India: Why online shopping is here to stay. http://www.indiaretailing.com/2017/05/19/retail/e-commerce-boom-in-india-why-onlinOnline shopping-is-here-to-stay/ (accessed, 10 April, 2018).

Kim, H. W., Xu, Y., and Gupta, S. (2012). Which is more important in Internet shopping, perceived price or trust?. Electronic Commerce Research and Applications, 11(3), 241-252.

37

Page 38:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Kim, H., and Lennon, S. J. (2010). E-atmosphere, emotional, cognitive, and behavioral responses. Journal of Fashion Marketing and Management: An International Journal, 14(3), 412-428.

Kim, J. H., Kim, M., and Lennon, S. J. (2009). Effects of web site atmospherics on consumer responses: music and product presentation. Direct Marketing: An International Journal, 3(1), 4-19

Kim, J., and Lennon, S. J. (2013). Effects of reputation and website quality on online consumers' emotion, perceived risk and purchase intention: Based on the stimulus-organism-response model. Journal of Research in Interactive Marketing, 7(1), 33-56.

Kim, M., and Lennon, S. (2008). The effects of visual and verbal information on attitudes and purchase intentions in internet shopping. Psychology and Marketing, 25(2), 146-178.

Kim, M., Kim, J. H., and Lennon, S. J. (2011). E-service attributes available on men's and women's apparel web sites. Managing Service Quality: An International Journal, 21(1), 25-45.

Kluge, P. N., Königsfeld, J. A., Fassnacht, M., and Mitschke, F. (2013). Luxury web atmospherics: an examination of homepage design. International Journal of Retail and Distribution Management, 41(11/12), 901-916.

KPMG. (2018). E-commerce retail logistics in India – Driving the change, https://assets.kpmg.com/content/dam/kpmg/in/pdf/2018/05/e-commerce-retail-logistics.pdf (accessed 12 June, 2018).

Laudon, K. C., and Traver, C. G. (2013). E-commerce. Pearson.

Lawrence, J. E., and Tar, U. A. (2010). Barriers to e-commerce in developing countries. Information, society and justice journal, 3(1), 23-35.

Liang, R., Wang, J., and Zhang, H. (2017). Evaluation of e-commerce websites: An integrated approach under a single-valued trapezoidal neutrosophic environment. Knowledge-Based Systems, 135, 44-59.

Lim, P. L., and Yazdanifard, R. (2014). Does Gender Play a Role in Online Consumer Behavior?. Global Journal of Management And Business Research.

Liu, H. C., Wu, J., and Li, P. (2013). Assessment of health-care waste disposal methods using a VIKOR-based fuzzy multi-criteria decision making method. Waste management, 33(12), 2744-2751.

Liu, H., Xuan, H. W., Cui, X., and Krasnoproshin, V. V. (2015, May). Determine weights of evaluation indices for E-Commerce websites ranking based on fuzzy AHP. In Electronic Engineering and Information Science: Proceedings of the International Conference of Electronic Engineering and Information Science 2015 (ICEEIS 2015), January 17-18, 2015, Harbin, China (p. 271). CRC Press.

38

Page 39:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Liu, P., and Wu, X. (2012). A competency evaluation method of human resources managers based on multi-granularity linguistic variables and VIKOR method. Technological and Economic Development of Economy, 18(4), 696-710.

Liu, W., Batra, R., and Wang, H. (2017). Product Touch and Consumers’ Online and Offline Buying: The Role of Mental Representation. Journal of Retailing, 93(3), 369-381.

Liu, Y., Ma, H., Liu, Z., and Hui, H. (2017). Research on the Evaluation System of E-commerce Specialty Based on TOPSIS and Analytic Hierarchy Process. Revista de la Facultad de Ingeniería, 32(4), 626-632.

Loureiro, S. M. C., and Breazeale, M. (2016). Pressing the buy button: Generation Y’s online clothing shopping orientation and its impact on purchase. Clothing and Textiles Research Journal, 34(3), 163-178.

Luo, J., Ba, S., and Zhang, H. (2012). The effectiveness of online shopping characteristics and well-designed websites on satisfaction. Mis Quarterly, 1131-1144.

Luthra, S., Govindan, K., Kannan, D., Mangla, S. K., and Garg, C. P. (2017). An integrated framework for sustainable supplier selection and evaluation in supply chains. Journal of Cleaner Production, 140, 1686-1698.

Mangla, S. K., Govindan, K., and Luthra, S. (2016). Critical success factors for reverse logistics in Indian industries: a structural model. Journal of cleaner production, 129, 608-621.

Mann, M., and Byun, S. E. (2011). Accessing opportunities in apparel retail sectors in India: Porter's diamond approach. Journal of Fashion Marketing and Management: An International Journal, 15(2), 194-210.

Masudin, I., and Saputro, T. E. (2016, February). Evaluation of B2C website based on the usability factors by using fuzzy AHP and hierarchical fuzzy TOPSIS. In IOP Conference Series: Materials Science and Engineering (Vol. 114, No. 1, p. 012091). IOP Publishing. doi:10.1088/1757-899X/114/1/012091

Mathen, N. (2014). Online Promotions: Exploring the emerging opportunity in Indian market.

Meiseberg, B. (2016). The Effectiveness of E-tailers’ Communication Practices in Stimulating Sales of Niche versus Popular Products. Journal of retailing, 92(3), 319-332.

Mohorovičić, S. (2013, May). Implementing responsive web design for enhanced web presence. In Information and Communication Technology Electronics and Microelectronics (MIPRO), 2013 36th International Convention on (pp. 1206-1210). IEEE.

Morton, F. (2018). The Use of Written Descriptions and 2D Images as Cues for Tactile Information in Online Shopping. In Intelligent Multidimensional Data and Image Processing (pp. 18-37). IGI Global.

39

Page 40:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Namin, A., Ratchford, B. T., and Soysal, G. P. (2017). An empirical analysis of demand variations and markdown policies for fashion retailers. Journal of Retailing and Consumer Services, 38, 126-136.

Nisar, T. M., and Prabhakar, G. (2017). What factors determine e-satisfaction and consumer spending in e-commerce retailing?. Journal of Retailing and Consumer Services, 39, 135-144.

Noh, M., Lee, K., Kim, S., and Garrison, G. (2013). Effects of collectivism on actual s-commerce use and the moderating effect of price consciousness. Journal of Electronic Commerce Research, 14(3), 244.

O’Brien, H. L. (2010). The influence of hedonic and utilitarian motivations on user engagement: The case of online shopping experiences. Interacting with computers, 22(5), 344-352.

Oghazi, P., Karlsson, S., Hellström, D., and Hjort, K. (2018). Online purchase return policy leniency and purchase decision: Mediating role of consumer trust. Journal of Retailing and Consumer Services, 41, 190-200.

Olteanu, A., Peshterliev, S., Liu, X., and Aberer, K. (2013, March). Web credibility: features exploration and credibility prediction. In European conference on information retrieval(pp. 557-568). Springer, Berlin, Heidelberg.

Opricovic, S., and Tzeng, G. H. (2004). Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS. European journal of operational research, 156(2), 445-455.

Opricovic, S., and Tzeng, G. H. (2007). Extended VIKOR method in comparison with outranking methods. European journal of operational research, 178(2), 514-529.

Opricovic, S., and Tzeng, G. H. (2004). Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS. European journal of operational research, 156(2), 445-455.

Park, C. H., and Kim, Y. G. (2003). Identifying key factors affecting consumer purchase behavior in an online shopping context. International journal of retail and distribution management, 31(1), 16-29.

Park, E. J., Kim, E. Y., Funches, V. M., and Foxx, W. (2012). Apparel product attributes, web browsing, and e-impulse buying on shopping websites. Journal of Business Research, 65(11), 1583-1589.

Prasad, K. D., Prasad, M. V., Rao, S. B., and Patro, C. S. (2016). Supplier Selection through AHP-VIKOR Integrated Methodology. SSRG International Journal of Industrial Engineering, 3(5), 1-6.

Ranganathan, C., and Ganapathy, S. (2002). Key dimensions of business-to-consumer web sites. Information and Management, 39(6), 457-465.

40

Page 41:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Rezaie, K., Ramiyani, S. S., Nazari-Shirkouhi, S., and Badizadeh, A. (2014). Evaluating performance of Iranian cement firms using an integrated fuzzy AHP–VIKOR method. Applied Mathematical Modelling, 38(21-22), 5033-5046.

Rouyendegh, B. D., Topuz, K., Dag, A., and Oztekin, A. (2018). An AHP-IFT Integrated Model for Performance Evaluation of E-Commerce Web Sites. Information Systems Frontiers, 1-11.

Roy Dholakia, R., and Zhao, M. (2010). Effects of online store attributes on customer satisfaction and repurchase intentions. International Journal of Retail and Distribution Management, 38(7), 482-496.

Saaty, T. L. (1988). What is the analytic hierarchy process?. In Mathematical models for decision support (pp. 109-121). Springer, Berlin, Heidelberg.

Saaty, T. L. (1990). How to make a decision: the analytic hierarchy process. European journal of operational research, 48(1), 9-26.

Saaty, T. L. (2013). Analytic hierarchy process. In Encyclopedia of operations research and management science (pp. 52-64). Springer, Boston, MA.

Salehi, K. (2016). An integrated approach of fuzzy AHP and fuzzy VIKOR for personnel selection problem. Global Journal of Management Studies and Researches, 3(3), 89-95.

Scarpi, D., Pizzi, G., and Visentin, M. (2014). Shopping for fun or shopping to buy: Is it different online and offline?. Journal of Retailing and Consumer Services, 21(3), 258-267.

Sekozawa, T., Mitsuhashi, H., and Ozawa, Y. (2011). One‐to‐one recommendation system in apparel online shopping. Electronics and Communications in Japan, 94(1), 51-60.

Shokri, H., Ashjari, B., Saberi, M., and Yoon, J. H. (2013). An integrated AHP-VIKOR methodology for Facility Layout design. Industrial Engineering and Management Systems, 12(4), 389-405.

Singh, S., Olugu, E. U., Musa, S. N., Mahat, A. B., and Wong, K. Y. (2016). Strategy selection for sustainable manufacturing with integrated AHP-VIKOR method under interval-valued fuzzy environment. The International Journal of Advanced Manufacturing Technology, 84(1-4), 547-563.

Singh, S., Singh, R. K., and Seth, N. (2017). Ranking of critical success factors for online retailing by TOPSIS approach. International Journal of Productivity and Quality Management, 21(3), 359-374. Doi: 10.1504/IJPQM.2017.084460

Singh, T., Malik, S., and Sarkar, D. (2016, April). E-commerce website quality assessment based on usability. In Computing, Communication and Automation (ICCCA), 2016 International Conference on (pp. 101-105). IEEE.

Soner, O., Celik, E., and Akyuz, E. (2017). Application of AHP and VIKOR methods under interval type 2 fuzzy environment in maritime transportation. Ocean Engineering, 129, 107-116.

41

Page 42:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Song, S. S., and Kim, M. (2012). Does more mean better? An examination of visual product presentation in e-retailing.

Srivastava, P. R., Sharma, A., Yadav, R. S., Sharma, S. K., and Kaur, I. (2018). Online Store Attribute Preferences: A Gender Based Perspective and MCDM Approach. International Journal of Strategic Decision Sciences (IJSDS), 9(2), 70-84. DOI: 10.4018/IJSDS.2018040105

Tadić, S., Zečević, S., and Krstić, M. (2015). Ranking of logistics system scenarios using combined fuzzy ahp-vikor model. International Journal for Traffic and Transport Engineering, 5(1), 54-63.

Team, R.C. (2018). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. URL https://www.r-project.org/

Thakur, R., and Srivastava, M. (2015). A study on the impact of consumer risk perception and innovativeness on online shopping in India. International Journal of Retail and Distribution Management, 43(2), 148-166.

Tian, G., Zhou, M., Zhang, H., and Jia, H. (2016, April). An integrated AHP and VIKOR approach to evaluating green design alternatives. In 2016 IEEE 13th International Conference on Networking, Sensing, and Control (ICNSC)(pp. 1-6). IEEE.

Tong, L. I., Chen, C. C., and Wang, C. H. (2007). Optimization of multi-response processes using the VIKOR method. The International Journal of Advanced Manufacturing Technology, 31(11-12), 1049-1057.

Upadhyay, H. (2018). Myntra nears $2 Bn annual GMV run rate: Hasn’t it left Flipkart and Amazon behind? https://entrackr.com/2018/08/myntras-bn-gmv-fashiona-sale/ (accessed 22 August, 2018).

Utz, S., Kerkhof, P., and Van Den Bos, J. (2012). Consumers rule: How consumer reviews influence perceived trustworthiness of online stores. Electronic Commerce Research and Applications, 11(1), 49-58.

Valmohammadi, C., and Dashti, S. (2016). Using interpretive structural modeling and fuzzy analytical process to identify and prioritize the interactive barriers of e-commerce implementation. Information and Management, 53(2), 157-168.

Van der Heijden, H., and Verhagen, T. (2004). Online store image: conceptual foundations and empirical measurement. Information and Management, 41(5), 609-617.

Vana, P., Lambrecht, A., and Bertini, M. (2018). Cashback is Cash Forward: Delaying a Discount to Entice Future Spending. Journal of Marketing Research.

Verhagen, T., and Van Dolen, W. (2009). Online purchase intentions: A multi-channel store image perspective. Information and Management, 46(2), 77-82.Verhagen, T., Vonkeman, C. C., Feldberg, J. F. M., and Verhagen, P. (2013). Making online products more tangible and likeable: The role of local presence as product presentation mechanism.

42

Page 43:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Wang, B., Song, J., Ren, J., Li, K., Duan, H., and Wang, X. E. (2019). Selecting sustainable energy conversion technologies for agricultural residues: A fuzzy AHP-VIKOR based prioritization from life cycle perspective. Resources, Conservation and Recycling, 142, 78-87.

Wang, F., Menon, K., and Ranaweera, C. (2018). Dynamic trends in online product ratings: A diagnostic utility explanation. Journal of Business Research, 87, 80-89.

Wang, Y. J., Minor, M. S., and Wei, J. (2011). Aesthetics and the online shopping environment: Understanding consumer responses. Journal of Retailing, 87(1), 46-58.

Wang, Y. J., Minor, M. S., and Wei, J. (2011). Aesthetics and the online shopping environment: Understanding consumer responses. Journal of Retailing, 87(1), 46-58.

Wei, P. S., and Lu, H. P. (2013). An examination of the celebrity endorsements and online customer reviews influence female consumers’ shopping behavior. Computers in Human Behavior, 29(1), 193-201.

Wong, W., Bartels, M., Chrobot, N., (2014). ‘Practical Eye Trackingof the Ecommerce Website User Experience’, C. Stephanidis and M. Antona (Eds.): UAHCI/HCII 2014, Part IV, LNCS 8516, 109–118, Springer International Publishing: Switzerland.

Wu, W. Y., Lee, C. L., Fu, C. S., and Wang, H. C. (2013). How can online store layout design and atmosphere influence consumer shopping intention on a website?. International Journal of Retail and Distribution Management, 42(1), 4-24.

Xu, K., Liao, S. S., Li, J., and Song, Y. (2011). Mining comparative opinions from customer reviews for Competitive Intelligence. Decision support systems, 50(4), 743-754.

Xu, P., Chen, L., and Santhanam, R. (2015). Will video be the next generation of e-commerce product reviews? Presentation format and the role of product type. Decision Support Systems, 73, 85-96.

Xu, X., Li, Q., Peng, L., Hsia, T. L., Huang, C. J., and Wu, J. H. (2017). The impact of informational incentives and social influence on consumer behavior during Alibaba's online shopping carnival. Computers in Human Behavior, 76, 245-254.

Yoo, J., and Kim, M. (2014). The effects of home page design on consumer responses: Moderating role of centrality of visual product aesthetics. Computers in Human Behavior, 38, 240-247.

Yu, X., Zhang, H., Bouras, A., Ouzrout, Y., and Sekhari, A. (2018). Multi-Criteria Decision Making for PLM Maturity Analysis based on an Integrated Fuzzy AHP and VIKOR Methodology. Journal of Advanced Manufacturing Systems, 17(02), 155-179.

Zafar, A., Zafar, M., Sarwar, A., Raza, H., and Khan, M. T. (2018, August). A Fuzzy AHP Method for Green Supplier Selection and Evaluation. In International Conference on Management Science and Engineering Management (pp. 1355-1366). Springer, Cham.

43

Page 44:  · Web viewThe matrix is made using a pairwise comparison AHP methodology by decision-makers. CI = 0.0589; CR=4.75% which shows that the matrix is reliable and consistent. CI = 0.0589;

Zhou, Y. W., Cao, B., Tang, Q., and Zhou, W. (2017). Pricing and rebate strategies for an Online shop with a cashback website. European Journal of Operational Research, 262(1), 108-122.

Zhu, G. N., Hu, J., Qi, J., Gu, C. C., and Peng, Y. H. (2015). An integrated AHP and VIKOR for design concept evaluation based on rough number. Advanced Engineering Informatics, 29(3), 408-418.

44