Assessment 1:

Included in this document will be step by step instructions on how to remove a tire and replace it on a small car, in this case a 2004 Mazda 3 Sports.

Changing a tire:Things you will need:. A tire iron.. A car jack.. A spare tire.. The car manual (optional.)

Removing the tire: Step 1: the first step in changing a cars tire is finding the tools and tire its self, all my equipment and car tire is located in the boot section of the car.

Step 2Take out all tools, the jack and spare tire.

Step 3Find the dedicated jacking spot on the car and prop it up to about 2 inch’s of the ground. (Mine is located on the sides of the car)

Step 4Using the tire iron un-screw the nuts (in an anti-clockwise rotation) holding the tire on the car, once all nuts have been removed take off the tire.

Putting on the tire: Step 1Next take the spare tire and place it onto the car, screw on nuts (in a clock-wise rotation) be sure to screw them in a star pattern!

Step 2Once the nuts have been attached check them again and make them as tight as possible with the tire iron.

And there you go. You now know how to remove and put on a tire to a car.

Step 1:

Step 2:

Step 3:

Step 4:

Step 1:

Step 2: