week 3 - water
TRANSCRIPT
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 1/21
Week 3 – Water
FST 1800Fundamentals of Food Science
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 2/21
• To understand physical state of water
• To identify factors influencing boiling andfreezing point of water
• To differentiate between moisture content and
water activity
Learning objectives
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 3/21
Lecture outline
• States of water
• Factors influencing boiling & freezing point
of water
• Moisture content
• Water activity
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 4/21
States/phases of water
• Solid, liquid, gaseous
• liquid • steam
• 4th physical state: amorphous glass
• ice
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 5/21
Phase transition
First order
• Govern changes in physical state betweensolid, liquid and gaseous states
• Examples - melting, crystallization,condensation & evaporation
• Changes occur isothermally
• A certain amount of heat is either released orrequired as the latent heat (H) for the transition
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 6/21
First order phase transition
• Latent heat of fusion – energy required toconvert 1 g of ice to water at 0C
• Melting – energy is absorbed
• Crystallization – energy is released
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 7/21
Phase transition cont.
Second order• Occur in amorphous materials
• Transformed from solid “glassy” state to liquid-like rubbery
state at glass transition temperatures, Tg
• No latent heat is involved
• Change in specific heat/heat capacity (energy to raise thetemperature of 1 g of water by 1C)
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 8/21
Phase transition cont.
(Roos, 2002)
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 9/21
Vapour pressure
• Pressure that is exerted by vapour molecules that haveescaped from liquid
• High vapour pressure – many water molecules in the vapourstate (low boiling point)
• Low vapour pressure – water molecules do not vapourizeeasily & a few molecules exist in vapour state (high boilingpoint)
• with temperature
• with solute addition (sugar, salt)
(Vaclavik & Christian, 2008)
Na+ Cl+
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 10/21
Factors influencing freezing point
• At the freezing point, water in its liquid state is inequilibrium with solid state, ice
• Addition of solute (salt, sugar) – depresses the
freezing point because the addition of solute reduces thevapour pressure
(McWilliams, 2008)
Mass of
sodium
chloride
(NaCl) (%)
Depression
of freezing
point
Actual
freezing
temperature
(C)
2 1.19 -1.19
4 2.41 -2.41
6 3.70 -3.70
8 5.08 -5.08
(Modified from CRC Handbook of Chemistry and Physics, 2004)
Mass of
sucrose
(%)
Depression
of freezing
point
Actual
freezing
temperature
(C)
2 0.11 -0.11
4 0.23 -0.23
6 0.35 -0.35
8 0.49 -0.49
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 11/21
Factors influencing boiling point
• Temperature at which vapourpressure has just exceededatmospheric pressure
• At sea level, water boils at
100C
• Altitude – atmospheric pressuredecreases with an increase inaltitude
• Vapour pressure that will exceedatmospheric pressure drops asaltitude rises – boiling point
(McWilliams, 2008)
Elevation (ft) Temperature of
boiling water (C)
Sea level 100.0
1000 98.9
2000 97.8
4000 95.6
5000 94.4
6000 93.3
7000 92.2
8000 91.1
10,000 88.9
(Modified from McWilliams, 2008)
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 12/21
Sucrose (%) Temperature of
boiling water (C)
0 100.0
10 100.4
20 100.6
40 101.550 102.0
60 103.0
70 106.5
80 112.0
90 130.0
Factors influencing boiling point cont.
• Addition of solute – vapourpressure is lowered, increasein boiling point
(Modified from McWilliams, 2008)
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 13/21
Free & bound water
Free water• Extractable (cutting/squeezing)• Able to dissolve & dilute many substances
Bound water• Cannot be extracted• Cannot flow• Cannot serve as solvent
• Can be frozen at very low temperatures (belowfreezing point of water)
• Exhibit no vapour pressure
(McWilliams, 2008)
(Vaclavik & Christian, 2008)
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 14/21
Moisture content & water activity
Moisture content
• Quantitative amount of water in a sample on wet or drybasis
• Depends on the amount of material
Water activity (aw)
• Comparison (ratio) of the vapour pressure of waterin a food sample with the vapour pressure of purewater at the same temperature
• Measure free/unbound water
(McWilliams, 2008)
(Vaclavik & Christian, 2008)
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 15/21
Water activity
(McWilliams, 2008)
Water activity = vapour pressure of water in samplevapour pressure of pure water
aw = p/p0
= ERH (%)/100• if water activity = 0.7,the equilibrium relative humidity (ERH) = 70%
(Decagon services)
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 16/21
Water activity cont.
(McWilliams, 2008)
(Decagon services) Which way does water move?
20% Moisture 30% Moisture
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 17/21
Moisture content & water activity cont.
Initial Final
Moisture Content 4% 20%
Water Activity 0.30 0.75
Decagon services
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 18/21
Type of food product Water activity (aw)
Fresh meat & fish 0.99Bread 0.95
Aged cheddar 0.85
Jams & jellies 0.8
Plum pudding 0.8
Dried fruit 0.6
Biscuits 0.3
Milk powder 0.2
Instant coffee 0.2
Water activity cont.
Water activity (aw)• Water activity scale: 0 (bone dry) to 1 (pure water)
http://www.foodscience.csiro.au/water_fs.htm
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 19/21
Application of water activity
• Predict growth of bacteria, molds or yeasts
• Monitor shelf life of food
http://www.foodscience.csiro.au/water_fs.htm
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 20/21
Alter the water activity
• Temperature• Drying• Freezing• Addition of salt/sugar
Food Water activity at
10 (C) 20 (C) 30 (C) 40 (C)
Distilled
water
1.000 1.000 1.000 1.000
Dry soup
mix
0.191 0.239 0.292 0.302
Beef jerky 0.694 0.697 0.693 0.698
Sausage 0.942 0.943 0.944 0.938
(Modified from McWilliams, 2008)(McWilliams, 2008)
8/7/2019 week 3 - water
http://slidepdf.com/reader/full/week-3-water 21/21
Summary
• Water exists in liquid, crystalline, gas or glassy states
• The physical states/phases of water are interchangeablethrough either absorption/release of heat
• Freezing & boiling points are affected by the addition ofsolutes
• The freezing point of water is depressed whilst theboiling point of water is elevated in the presence ofsolutes
• Altitude influences the boiling point of water
• Water activity is an important parameter in determiningshelf life of food compared to moisture content as it
measures ONLY the free/unbound water