welding know how
TRANSCRIPT
-
8/19/2019 Welding know how
1/8
Seam Weld
-
8/19/2019 Welding know how
2/8
Spot Weld
Spot resistance welds are usually used to
connect thin plates and thin-walled parts. They
are especially very useful in lot production. The
connections with spot welds are not very
appropriate for transferring high forces. In view
of the type of stress, we distinguish two basic
types of connections with spot welds:- connections with welds stressed in shear (lap
oints!connections with welds stressed in tear
(by tension!
-
8/19/2019 Welding know how
3/8
"illet Weld
-
8/19/2019 Welding know how
4/8
#lug Weld
#lug and slot welds are usually used for lap
oints. They are not suitable for the transfer of
high forces and are especially not suitable for
dynamically loaded connections. The
connection is formed by the weld on walls ofcircular or oval openings and in the contact
surface of the adoining part. #lugs and slots of
small dimensions are usually fully filled with
the weld.
-
8/19/2019 Welding know how
5/8
Slot Weld
$ weld between two members, one containing an elongated hole through which the other
member is e%posed& the hole is completely or partially filled with weld metal, thereby
oining the two members& one end of the hole may be open.
Similar to plug weld, but the hole is elongated and may e%tend to the edge of a member
without closing.
-
8/19/2019 Welding know how
6/8
'utt Weld
'utt welds originate in the oint gap of
connected parts and are usually used as load-bearing, force welds. In order to achieve
perfect wormanship of the welds, it is usually
necessary to perform modification of the
contact surfaces of the connected parts. The
method of welded surface treatment is set by
the wormanship of the connection, the
thicness of the welded parts, the welding
method and the accessibility of the welded
spot.
-
8/19/2019 Welding know how
7/8
http://www.mitcalc.com/doc/welding/help/en/welding.htmhttp://www.me.metu.edu.tr/courses/me114/Lectures/loc_key_spr_riv.htm
http://www.mitcalc.com/doc/welding/help/en/welding.htmhttp://www.me.metu.edu.tr/courses/me114/Lectures/loc_key_spr_riv.htmhttp://www.me.metu.edu.tr/courses/me114/Lectures/loc_key_spr_riv.htmhttp://www.me.metu.edu.tr/courses/me114/Lectures/loc_key_spr_riv.htmhttp://www.mitcalc.com/doc/welding/help/en/welding.htmhttp://www.mitcalc.com/doc/welding/help/en/welding.htm
-
8/19/2019 Welding know how
8/8