west #23, 2009 - ceg
DESCRIPTION
West 23, 2009 issue of Construction Equipment Guide. A great source for new and used heavy construction equipment, upcoming construction auctions, business calendars and the best editorial coverage in the industry.TRANSCRIPT
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
® WWeesstteerrnnEEddiittiioonn
$3.00
November 72009
Vol. V • No.23
AAGGCC ooff TTeexxaass WWeellccoommeessVViissiittoorrss ttoo AAuussttiinn……1122
CCaatt AAuuccttiioonn SSeerrvviicceess HHoossttssSSaallee iinn HHoouussttoonn……4400
IInnssiiddee
Table of Contents ........4
Crushing, Screening &Recycling Section 17-21
Business Calendar ....18
Truck & Trailer......31-32
Auction Section....37-42
Advertisers Index ......43
Published Nationally
After excavating the arena area,K&E moved to a related project:
an $18-million underground park-ing garage intended to accommo-
date Ducks fans.
By Rebecca RagainCEG CORRESPONDENT
University of Oregon (UO) basketballfans are eagerly following the progress ofthe new Matthew Knight Arena, whichreplaces the affectionately regarded butmuch outdated McArthur Court.
McArthur Court, nicknamed MacCourt and The Pit, is the second oldeston-campus gym in the country, accordingto UO’s sports history Web site. Built in1926, the court’s original capacity was6,000; improvements over the yearsbrought capacity to its current 9,087.
“There are a lot of fond memories ofThe Pit,” said Tim Clevenger, vice presi-dent of marketing and brand managementat The Papé Group Inc., who is a UOgraduate and past president of the univer-sity’s alumni association. “However, asthe program has grown, it’s just been
harder and harder to get people in there.”“Matt Court,” as some fans refer to the
new arena, will seat 12,541 — in wider,modern-style seats with better courtviews — and have more than four timesas many restrooms compared toMcArthur Court.
The Matthew Knight Arena is namedin honor of UO patron Phil Knight’s son,who died in 2004. In 2007, the co-founder of Nike pledged $100 million tothe university’s athletic department, cat-alyzing funding of the $230-million arenaproject.
Ground breaking for the 397,825-sq.-ft. (36,960 sq m) arena took place inFebruary. The first Ducks game in thenew arena is scheduled to take place asearly as December of next year, givinggeneral contractor Hoffman Constructionand approximately 70 subcontractors less
Matt Court’s Countdownto Tip Off Begins in Ore.
see DUCKS page 16
By Rebecca RagainCEG CORRESPONDENT
Over the weekend of Oct. 10, a massive landslide cov-ered a half mile of state Route 410 in Nile Valley, Wash.,with rock and debris up to 30 ft. (9.1 m) deep. The slidedisrupted the course of the Naches River, pushing theriverbed up the slope opposite the slide, leaving fishexposed on the rocks dozens of feet above their previoushome.
The affected section of highway is between MountRainer National Park and SR 410’s junction with U.S. 12,about 20 mi. northwest of Yakima. The slide also damagedanother main route, Nile Road, which runs parallel to SR410. When both of those roadways were closed, the 1,500residents of Nile Valley were faced with a 90-mi. detour.
The cause of the slide is unknown. AlthoughWashington’s Department of Natural Resources is investi-gating further, right now the Washington State Departmentof Transportation (WSDOT) is less concerned with the“why” behind the slide and more focused on the “how” offixing the problem.
The first step for WSDOT and contractor SellandConstruction Inc., based in Wenatchee, Wash., was tobuild a temporary emergency route on Nile Road for localtraffic. Crews spent the week following the slide bringing
Crews Race Winterto Counteract HugeLandslide in Wash.
see LANDSLIDE page 26
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com“The Nation’s Best Read Construction Newspaper… Founded 1957.”
® WesternEdition
$3.00
October 242009
Vol. V • No.22
Westernn Statess Hostss DemoEventt inn Boise…8
Trulovee Venturess IntoAsphaltt inn Colo.. …199
ICUEE Welcomess Visitorstoo Louisville…12
Inside
Table of Contents ........4
Business Calendar ....10
Paving Section......19-24
Trailer Section ......31-35
Parts Section ............45
Auction Section....49-54
Advertisers Index ......54
Published Nationally
Crews work on installation of a box culvert over a dry river bed just off St. Mary’sRoad.
By Kathie SutinCEG CORRESPONDENT
The largest highway project in southernArizona history — the widening of I-10through downtown Tucson — is winding upsix months ahead of schedule due to goodcooperation between the partners and projectaccelerations.
Rod Lane, senior resident engineer with
the Arizona Department of Transportation(ADOT) and ADOT project manager, cred-ited cooperation between the city, the con-tractor and the highway department.
“All of us just worked really well togeth-er,” he said.
Kiewit-Sundt, a joint venture between thePhoenix office of Kiewit and SundtConstruction of Tempe, was the general con-
ADOTAhead of Scheduleon I-10 Project in Tucson
see ADOT page 50
By Giles LambertsonCEG CORRESPONDENT
When the U.S. Senate failed in September to enactsix-year transportation legislation or to extend theexisting funding authority in a responsible way, itcreated a billion-dollar-a-month hole for the con-struction industry.
“The baseline for the federal highway account isreduced by a billion dollars each month we have acontinuing resolution,” said Tony Dorsey, mediaspokesman of the American Association of StateHighway and Transportation Officials (AASHTO).“It will cost our members one billion dollars everymonth we have a resolution.”
While the huge loss is mostly on paper — so far— it nonetheless is a drag on the construction econ-omy. Here’s the deal:
Though the Senate agreed with the House at thevery last moment to a one-month extension of exist-ing transportation funding authority, senators failedto include a provision to roll back funding rescis-sions stipulated in the last six-year bill. The $8.7 bil-lion in rescission money was a bookkeeping methodof understating the true cost of SAFETEA-LU,which was passed in 2005 (two years into the six
Congress Lagson HighwayBill Extension
see EXTENSION page 10
Our Latest Issues Are Now Online!West
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequip mentguide.com“The Nation’s Best Read Construction Newspaper… Founded 1957.”
® WesternEdition
$3.00
October 102009
Vol. V • No.21
HOLTT Cranee Hostss OpenHousee inn Houston…8
Cashmann Supportss StartUss Upp USA!! inn Vegas…39
Scott-Maconn Holdss GrandOpeningg inn Dallas…14
Inside
Table of Contents ........4
Crushing, Screening &Recycling Section ..19-23
Business Calendar ....20
Truck & Trailer......33-35
Parts Section ............37
Auction Section....41-45
Advertisers Index ......46
Published Nationally
The bridges that were moved vary in length from 85 to 173 ft. (25.9 to 52.7 m) and were 43to 94 ft. (13 to 28.6 m) wide. The largest weighed in at 1,350 tons (1,220 t).
By Kathie SutinCEG CORRESPONDENT
Work on a Utah freeway reconstruction projectso unusual it was featured as NationalGeographic Channel’s “World’s Toughest Fixes”is heading for an on-time, on-budget completionat the end of the year.
What made work on a 2-mi. (3.2 km) stretchof I-80 in Salt Lake City project extraordinarywas the Accelerated Bridge Construction (ABC)method using Self Propelled Modular Transports(SPMT) to construct six of 12 bridges and one oftwo ramps in the project.
The $139 million project along a 2-mi. stretchfrom State Street to 1300 East through Salt LakeCity includes construction of the bridges andramp “not at their final location,” John Montoya,project manager, said. Instead, the girders anddecks were constructed on the ground at a “bridgefarm.” Massive transporters moved them to belifted into place along the expressway.
Horrocks Engineering and H.W. LochnerEngineering are the designers and Ralph L.Wadsworth Construction is the general contrac-tor.
Some of the bridges were transported as muchas a mile and a half which is “a good distance,”Montoya said.
“That was significant. There are a fair amountof projects where you move a bridge a couplehundred feet but we actually moved some ofthem a mile and a half.”
The bridges that were moved vary in lengthfrom 85 to 173 ft. (25.9 to 52.7 m) and were 43 to94 ft. (13 to 28.6 m) wide, Carlye Sommers, pub-lic involvement manager for Lochner, said. Thelargest weighed in at 1,350 tons (1,220 t).
The SPMTs that moved the bridges hadapproximately 250 wheels and moved at an aver-age speed of five miles per hour, Sommers said.
The only route crews could move the bridgesdown was the same one they were working on so
Reconstruction on Schedulefor UDOT’s $139M Project
see UDOT page 37
By Giles LambertsonCEG CORRESPONDENT
Health care reform in the United Stateshas been beaten nearly to death this year byadvocates and critics alike. Yet as thedebate moves into October, the final shapeof “reform” remains elusive and elasticwith construction industry executives anx-ious about its impact on their companies.
Any change in the system definitely willhave impact on contractors and a sweepingchange could upend smaller firms — andmost construction companies are small-to-medium-sized. The truth of the matter isthe reform model in which governmentwould provide most health care serviceswould dramatically change the way everybusiness operates, large or small.
It is impractical to hope that health carereform will be tailored to the constructionindustry. Nevertheless, small businessesconsistently favor certain reform initiativesover others. Were Washington to institutereform along the lines general contractorsmight lay down, the following featureswould be among the legislated changes:
• New authority for associations tonegotiate insurance packages for theirmembers. Besides gaining clout in negoti-ating benefits, association insurance nego-tiators could win lower premiums, if giventhe opportunity. Associated Builders andContractors noted that private insurancecarriers must mark up premiums as muchas 35 percent when dealing with smallgroups in order to meet profit targets andoffset overhead. Whereas associations canprovide the same administrative servicesfor their members at a cost of 15 percent orless — if, that is, members are allowed tobuy insurance through small business
ConstructingHealthy Lookat Health Care
see REFORM page 28
Southeast
By Angela B. Hurni CEG CORRESPONDENT
On July 9 officials in Nashville, Tenn., brokeground on Phase II of the Interstate 40 WhiteBridge Road Interchange Improvement Project.Phase I was finished during the summer 2005.Since then, the project has been stalled for fouryears because of lack of funding. Now, the $32-million project is being totally funded throughmoney from the American Recovery andReinvestment Act of 2009, which the Presidentsigned into law in February
Many dignitaries, including Gov PhilBredesen and Tennessee Department ofTransportation (TDOT) Commissioner GeraldNicely, were on hand for the groundbreakingceremony
“This project will enhance Nashville’salready excellent transportation system,” saidBredesen at the ceremony. “It will improveaccess to Interstate 40 and Briley Parkway andwill contribute to continued economic develop-ment in West Nashville.”
Bell & Associates Construction LP,Brentwood, Tenn., is the prime contractor forPhase II, which includes a new interchange at I-40 and Briley Parkway/White BridgeRoad/Robertson Road. The company also con-structed the $43-million Phase I.
The contract also includes construction oftwo flyover ramps to and from I-40 and BrileyParkway, plus the replacement of the WhiteBridge Road Bridge over I-40. In addition, threenoise barriers and five retaining walls will bebuilt and a pedestrian bridge located just west ofthe interchange will be replaced.
“The project is just over a mile long,”explained Jeremy Mitchell, project managerwith Bell & Associates. There will be “threelanes west and three lanes east on I-40 and twoauxiliary lanes for the new ramps.”
The Interstate will be constructed of asphalt,and the ramps will be concrete paving. Therewill be more than 20,000 cu. yds. (15,200 cu. m)of concrete used on this project.
The two major bridges being built are theWhite Bridge Road Bridge and the pedestrianbridge. The White Bridge Road Bridge, measur-ing just over 1,500 ft. (457 m) long, is beingconstructed of single-column hammerhead piersand structural steel plate girders. The pedestrianbridge is approximately 230 ft. (70 m) long and
see TDOT page 40
Bell & Associates Construction is the primecontractor for the $32 million project. Thecompany has all-terrain cranes by Lorainhard at work on the job site.
By Giles LambertsonCEG CORRESPONDENT
Health care reform in the United States has beenbeaten nearly to death this year by advocates and crit-ics alike. Yet as the debate moves into October, the finalshape of “reform” remains elusive and elastic with con-struction industry executives anxious about its impacton their companies.
Any change in the system definitely will haveimpact on contractors and a sweeping change couldupend smaller firms — and most construction compa-nies are small-to-medium-sized. The truth of the mat-ter is the reform model in which government wouldprovide most health care services would dramatically
Industry Lobbiesfor CommonSense in Reform
Work Begins on Phase II of I-40 Interchange
Yanceyy Celebratess 95thAnniversary…10
Alexx Lyonn Holdss Two-Dayinn Kissimmee…52
Nortraxx Openss Fortt MeyersFacilityy inn Style…18
IInside
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com“The Nation’s Best Read Construction Newspaper… Founded 1957.”
® SoutheastEdition
$3.00October 212009
Vol. XXII • No.21
Published Nationally
By Bill KaczorASSOCIATED PRESS WRITER
TALLAHASSEE, Fla. (AP) GovCharlie Crist and his “stimulus czar’’ saidOct. 9 that a recent federal report supportsFlorida’s go-slow approach to spendingfederal recovery money earmarked forhighway projects and schools.
Even so, Florida’s overall stimulusspending is a bit ahead of schedule, saidczar Don Winstead, whose official title isspecial adviser to the governor on econom-ic stimulus.
Federal officials in February said theyexpected the state to spend about 20 per-cent of its estimated $15 billion in stimulusmoney by the end of September
“I think we will be ahead of that sched-
ule,’’ Winstead said. “We are seeing rapiddeployment and we’ll see over the nextcouple of months additional rapid deploy-ment of some of the larger projects.’’
In letters to state lawmakers and mem-bers of Florida’s congressional delegation,Crist cited a Government AccountabilityOffice report that focuses on stimulusspending for education, transportation andMedicaid. Winstead spoke about it in ateleconference with reporters.
In August, U.S. Rep. James Oberstar, aMinnesota Democrat who chairs theHouse Transportation and InfrastructureCommittee, sent Crist a letter chidingFlorida for ranking last in spending stimu-lus money designated for highway projectsand urged him to “refocus your efforts.’’
Federal Report Backs Fla.’sApproach to Stimulus Cash
see REFORM page 24see STIMULUS page 22
Table of Contents ............4
Truck & Trailer Section ......................................25-27
Crushing, Screening &Recycling Section ....31-37
Business Calendar ........38
Parts Section ............40-41
Auction Section ......49-55
Advertisers Index ..........54
Midwest$3.00
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequip mentguide.com“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®MidwestEdition
October 172009
Vol. XVI • No.21
By Lori LovelyCEG CORRESPONDENT
A short 19-mi. (30.5 km) stretch of road justnorth of Detroit has been transformed into animprovement project with a rather complicatedstrategy. Extensive work on the I-96/I-696 cor-ridor in Oakland and Macomb counties has beendivided into four separate projects.
Project 1 consists of rehabilitation of eightbridges and repair of 4 mi. (6.4 km) of pavementin Oakland County between Novi and Halstedroads, including the I-96/I-696/M-5 interchangein Novi and Farmington Hills.
Project 2 picks up where the first project endsand involves pavement patching and rehabilita-tion of 42 bridges on I-696 in Oakland Countybetween Halsted and Campbell-Hilton roads.
Project 3 focuses on rehabilitating 22 bridgeson I-696, 15 of which are located within the I-696/Mound Road interchange.
Project 4 includes rehabilitation of six bridgesand extensive pavement repairs to I-696between Hayes and Nieman roads in MacombCounty. Also included are safety upgrades andlighting replacement on the median and ramps.
OverlapFor all practical purposes, the $67 million
overall project has been divided into two con-tracts — east and west — with two prime con-tractors: Dan’s Excavating out of Grant, Mich.,on the west contract and C.A. Hall on the east.
But even that division is a little blurry. “There are overlapping facets,” says Bob
Daavettila, construction director for Tetra Tech,
particularly concerning the bridge work. A total of 56 bridges will undergo rehabilita-
tion. Because C.A. Hall is a subcontractor for allbridge work on both contracts and since there’sa lot of bridge work in the west contract, Hall isdoing considerable work on both.
“Because they’re a major sub, it leads to a lotof coordination. Hall is at all the meetings forthe Dan’s contract.”
According to Daavettila, the two big con-tracts consist of a two-year project for $47 mil-lion to reconstruct pavement from Novi toFarmington Hills — the west project — and a
$14 million contract to conduct bridge rehabili-tation and concrete patching on I-696 — the eastproject. The west contract involves significantamounts of overlay, but there is none on the eastcontract. Instead, there is, as Daavettila says, “alot of concrete patching.”
Other Names for an Old-Time Trail
Before being designated as a military high-way in 1832, the corridor from Lake Michiganthrough Detroit, Lansing and Grand Rapids was
MDOTRehabilitates Crucial Mich. Corridor
By Giles LambertsonCEG CORRESPONDENT
Health care reform in the United States has been beaten nearly to deaththis year by advocates and critics alike. Yet as the debate moves intoOctober, the final shape of “reform” remains elusive and elastic with con-struction industry executives anxious about its impact on their companies.
Any change in the system definitely will have impact on contractorsand a sweeping change could upend smaller firms — and most construc-tion companies are small-to-medium-sized. The truth of the matter is the
reform model in which government would provide most health care serv-ices would dramatically change the way every business operates, large orsmall.
It is impractical to hope that health care reform will be tailored to theconstruction industry. Nevertheless, small businesses consistently favorcertain reform initiatives over others. Were Washington to institute reformalong the lines general contractors might lay down, the following featureswould be among the legislated changes:
• New authority for associations to negotiate insurance packages
Constructing a Healthy Look at Health Care Reform
ICUEEE Welcomess LargeTurnoutt too Louisville…12
Halll Industriall ThanksCustomerss inn Ohio…58
HCEAA Preservess Historyatt Annuall Convention…14
IInside
Table of Contents ............4
Business Calendar ........32
Truck & Trailer Section ......................................35-42
Crushing, Screening &Recycling Section ....55-62
Parts Section ................63
Auction Section ......68-74
Advertisers Index ..........75
Published Nationally
see REFORM page 51
see MICHIGAN page 44
A total of 56 bridges will undergo rehabilitation. Because C.A. Hall is a subcontractor forall bridge work on both contracts and since there is a lot of bridge work in the west con-tract, Hall is doing considerable work on both.
New England
By Jay AdamsCEG CORRESPONDENT
In trucking, cooperation is everything. The same could besaid for construction work, all contracting and the running ofany successful club or organization.
Cooperation in all these arenas came together as one at theAntique Truck Club of America’s Little Rhody Chapter’sSixth Annual Antique Truck Show on Sept. 13 on theWashington County Fairgrounds in Richmond, R.I.Working in conjunction with the Historical ConstructionEquipment Association’s (HCEA) Northeast Rockbustersonce again, more than 60 members of the local AntiqueTruck Club brought out their finest old equipment, to thedelight and surprise of other members, guests and enthusi-asts.
The Antique Truck Club and the Rockbusters hold thisevent every September, drawing people from every NewEngland state. Machines that range from the unusual to thesublime fill the flat fields of the fairgrounds for passersby to
admire.“We combine our shows. We support them and they sup-
port us, even in the rain,” said Jackie Volatile, who organiz-es these shows with her husband, Roger, the club’s president.
What made the presidential couple so proud this year wasthat the event was organized to raise money and food for theRhode Island Food Bank.
We brought in 800 pounds of canned goods. Last year, wefed 2,000 needy families for a year and we are quite proud ofthat,” said Jackie Volatile.
They also are very proud of the cooperation and sharedinterests of their members who bring any and all workingantique machines to these events, as long as they are able.
“We welcome classic trucks, we welcome tractors, any-thing that comes in,” added Roger Volatile. “Antique isantique to us.”
The Volatiles represent the Little Rhody Chapter at nation-al events, usually held in the National Chapter’s home stateof Pennsylvania. “There are 21 different chapters in the
Antique Truck Lovers, NE RockbustersJoin for Sixth Annual Machine Show
THE NEW ENGLAND SUPPLEMENT
Your New England States Connection • John LaCamera 1-800-225-8448 • Kent Hogeboom 1-800-988-1203
October 142009
Vol. XXII • No. 21“The Nation’s Best Read Construction Newspaper… Founded in 1957.”
1
1
1
11
16 201
9
1
95
95
495
95
9
16
26
202
89
93
93 95
7
4
7
91
91
7
6
90 90
495
9593
195
95
6
95
7 6 395
95
8491
9184
95
E Q U I P M E N T G U I D E
F O R M E R L Y
The Northeast Rockbusters sign adorns a1934 McCormick Deering track tractor ownedby Dave Burnham of Saunderstown, R.I., presidentof the group and one of the event’s chief organizers.
see ROCKBUSTERS page 14
Bangor, ME(207)) 942-4838
Caribou, ME(207)) 498-2547
Westbrook, ME (207)) 854-8411Chelmsford, MA(978)) 479-5192
Concord, NH (603)) 224-4063
Your #1 Source for Used Equipment
Visit: www.chadwick-baross.com
Kraft Power Corporation
Perkins Master Service DealerNJ, MA & NY
Engines, Parts & Service800-969-6121www.kraftpower.com
AuthorizedDeutz
Distributor
Kraft Power Corporation
Engines, Parts & Service
800-969-6121Woburn, MA & Syracuse, NY
www.foleyengines.com
EQUIPMENT FINANCING
CHARLESS RIVERR FINANCIALcall
617-787-9090
Other Screeners AvailableFrom Argus Industrial Co.
www.ez-screen.com
866-745-5828
Works with 1/2 to 2 yard loaders. 20 HP
Deutz Diesel Engine. 24" Conveyor dumps screened
products 9' highTwo (2) Year Warranty
NEW $39,500 plus freight.
EZ Screen 1200XLNOW with a
ArgusIndustrial Co.
6'x5'Screenbox.
WANTED
603-595-2090
CATERPILLAREQUIPMENT
Call Lou Giza
MULTI MACHINE INC.
888-888-1248
• GUARANTEEDTO FIT
• HIGH QUALITY
• FAST SHIPPING
WE STOCK
RUBBER TRACKS
for Over 2,500 Models!Some Used Tracks Available.
BEST PRICES
For all your used equipment go to
www.ewsleeper.com
Northeast
Phillyy Liftedd too NewParkingg Heights…8
HCEA Holdss 24thh AnnualConvention…18
Atlanticc Cityy WelcomesUTCAA Members…12
IInside
Table of Contents ............4
Truck & Trailer Section ......................................58-63
Crushing, Screening &Recycling Section ....67-88
Parts Section ................89
Business Calendar ......111
Auction Section ..110-128
Advertisers Index ........126
By Mary ReedCEG CORRESPONDENT
After many years of discussion, an ambitiousproject to ease congestion in Pennsylvania’sdensely populated Bucks and Montgomery coun-ties is finally under way withconstruction of a long-awaitedparkway.
The PennsylvaniaDepartment of Transportation(PennDOT) has estimated thatby 2020 the new highway willbe traveled by between 23,700and 28,300 vehicles daily
Certain changes, however,had to be made before groundcould be broken for the project.
According to PennDOT, theparkway had initially beenplanned as an expressway withlimited access. However, inMarch 2004, the departmentrealized its projected revenueswould not provide enoughfunding for all its proposed
projects and this particular job was among thosere-evaluated. As a result, a parkway was ultimate-ly chosen as an appropriate solution for improvingtravel conditions in the area while remaining with-in the limitations imposed by available funds.
W To470 Maryland Drive • Ft. ashington, PA 19034 • 215/885-2900 • ll Free 800-523-2200 • Fax 215/885-2910 • www.ConstructionEquipmentGuide.com“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®NortheastEdition
$3.00
October 142009
Vol. XLVIII • No.21
Published Nationally
By Giles LambertsonCEG CORRESPONDENT
Health care reform in the United Stateshas been beaten nearly to death this year byadvocates and critics alike. Yet as thedebate moves into October, the final shapeof “reform” remains elusive and elasticwith construction industry executives anx-ious about its impact on their companies.
Any change in the system definitely willhave impact on contractors and a sweepingchange could upend smaller firms — andmost construction companies are small-to-medium-sized. The truth of the matter isthe reform model in which governmentwould provide most health care serviceswould dramatically change the way everybusiness operates, large or small.
It is impractical to hope that health carereform will be tailored to the constructionindustry. Nevertheless, small businessesconsistently favor certain reform initiativesover others. Were Washington to institutereform along the lines general contractorsmight lay down, the following featureswould be among the legislated changes:
• New authority for associations tonegotiate insurance packages for theirmembers. Besides gaining clout in negoti-ating benefits, association insurance nego-tiators could win lower premiums, if giventhe opportunity. Associated Builders andContractors noted that private insurancecarriers must mark up premiums as muchas 35 percent when dealing with smallgroups in order to meet profit targets andoffset overhead. Whereas associations canprovide the same administrative servicesfor their members at a cost of 15 percent orless — if, that is, members are allowed tobuy insurance through small businesshealth plan pools.
ConstructingHealthy Lookat Health Care
see REFORM page 22
Construction crews pourconcrete for an abutmentthat will support theRoute 202 parkwaybridge over Route 309.
Words Into Action: Route 202Parkway Finally Advances
Additional $30M inFunds En Route to Md.
Gov. Martin O’Malley announced that additional transportationprojects worth $30 million will be funded by President BarackObama’s American Recovery and Reinvestment Act (ARRA).Funding for these additional projects is available due to savingsgenerated by the intense competition for Maryland’s ARRA high-way and transit contracts advertised earlier this year.
“Without a doubt, President Obama’s recovery program is gen-erating the desired effect here in Maryland,” said O’Malley.“Across our state, work is under way rehabilitating our roads,bridges and transit systems. Healthy competition for those state
see FUNDS page 116
see PARKWAY page 30
®
DDiiggiittaall EEddiittiioonnss AAvvaaiillaabbllee aattccoonnssttrruuccttiioonneeqquuiippmmeennttgguuiiddee..ccoomm
Photo Courtesy/WSDOTWSDOT and the contractor continue to re-channelthe Naches River.
Page 2 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 3
1981 Broce D18, Stk# 6405, 8 ft. Broom, 451 hrs,Ford Gas Engine....................................................$3,250
1999 Case 570L XT, #6390, OROPS, 4WD, 3,132hrs., 70% Tires, 6 ft. Box Blade....................$13,500
2003 Cat D4G XL, #6166, OROPS, Sweeps, Screens,60% U/C, 6-Way Blade, 7294 Hrs ....................$29,500
2005 Lull 944E-42, Stk# 6433, 9,000 lbs, 42 ft.,3,553 hrs, 4WD, 4WS, 80% Foam Filled Tires, Hyd. TiltCarriage, Hyd. Leveling Sys., Rotating Forks..$26,500
2004 SuperPac 6620, #6154, 66" Smooth Drum,317 Hrs, Cummins Eng..................................$32,500
2006 Cat 318CL, Stk# 6277, EROPS, A/C, Heat,3,808 hrs, 80% U/C, 1.2 yards Bucket w/Thumb ..................................................................................$58,500
2004 Hitachi 270LC Zaxis, Stk# 5611, EROPS,A/C, 80% U/C, 7,149 Hrs, 48" Bucket ..........$62,500
2008 Komatsu PC50-MR2, Stk# 6352, OROPS, 18hrs, 18" Bkt, (16' digging depth, 19'7" Reach), Aux Hyd,Rubber Tracks....................................................$42,500
2000 JLG 600S, Stk# 6190, 500 Lbs, 60’, 4WD, 3696Hrs, Diesel Eng ..............................................$15,500
2005 John Deere 450J LGP, Stk# 6335, OROPS, 6 wayblade, 50% UC, 2,268 hrs....................................$32,500
2006 John Deere 450J LT, #6392, OROPS, 6 WayBlade, 80% U/C, 1,980 hrs............................$36,500
2004 John Deere 310G, Stk# 6353, OROPS, 4WD,1,814 hrs, 70% Tires, 24" Quick Connect Bucket, Aux.Hyd................................................................$29,500
2008 New Holland C175, #6422, OROPS, 235 hrs,60" Bucket, Rubber Tracks, N.H. Eng............$24,500
2002 Harlo HF456B, Stk# 6313, 6,000 lbs., 24 ft., 2WD,50% Tires, Side Shift Diesel .................................$12,500
2003 Case 580SM, Stk# 6417, EROPS, A/C, 4WD, 2,969hrs, 70% Tires, 2 Stick Control, 24" Bucket ........$29,500
2005 Cat D5N XL, Stk# 6263, OROPS, Sweeps,Screens, 6 way blade, 70% U/C, 4,990 hrs......$46,500
1998 Genie S60, Stk# 6171, 500 Lbs, 60’, 4WD,4540 Hrs, Diesel Eng ......................................$13,500
2004 Terex 5519, Stk# 5415, 5500 Lbs, 19’, 4WD,4WS, 2035 Hrs, 50% Foam Filled Tires, Deutz Eng. ......................................................................$22,500
2007 JCB 506C, Stk# 5980, NEW, 6000 Lbs, 36’,4WD, 7 Hrs, 48” Frame Forks .......................$34,500
2006 Case 586G, #6386, 6000 Lbs, 21’, 939 Hrs,4WD, 70% Tires............................................$21,500
2003 Case 1650K LGP, Stk# 5552, OROPS, 6-WayBlade, 80% U/C, 2954 Hrs, 32” Pads ..............$48,500
1998 Skytrak 3606, #6434, 6,000lbs., 36 ft., 4WD,3,279 hrs, 50% Foam Filled Tires ................$16,500
2000 Bomag BW156PD-H3, #6341, 56" Pad Drumw/Bld, 2,028 hrs, 60% Tires, Cummins Eng .$17,500
2000 Cat D6R XL, #6373, OROPS, Sweeps, RearScreens, Semi U/Tilt Blade, 80% U/C, 8,311 hrs, Carco70A Winch ....................................................$79,500
2005 Komatsu D31EX, #5777, OROPS, 6-WayBlade, 951 Hrs, 80% U/C .............................$34,500
2001 Gradall 534D-6, Stk# 6257, 6,000 Lbs, 34 ft,2750 Hrs, 70% Tires, 4WD, Hyd Self Leveling..$15,500
1997 Cat 12H, Stk# 6415, LowPro Cab, EROPS, A/C,10,688 hrs, 14 ft. M/B w/Hyd Slide & Tip Control, RearRipper.............................................................$79,500
1979 Cat D8K, Stk# 6418, EROPS, A/C, Semi U w/Tilt,70% U/C, 5,953 hrs..........................................$46,500
2000 Ingersoll Rand SD70D, Stk# 6164, 66” SmoothDrum w/Pad Drum Shell Kit, 2,611 hrs. ...........$22,500
2005 Case 850K LT, Stk# 6203, OROPS, Sweeps,Screens, 6-Way Blade, 2843 Hrs .....................$34,500
2003 Cat D6N XL, #6368, OROPS, 6 Way Blade,60% U/C, 4,500 hrs......................................$55,500
2002 Cat D6R LGP, Stk# 6246, EROPS, A/C, Radio,Sweeps, St/Tilt Blade, 70% U/C, 9076 Hrs ................................w/Cat Winch $82,500 w/NO Winch $69,500
2006 John Deere 700J, Stk# 6227, OROPS,Sweeps, Screens, 6-Way Blade, 80% U/C, 2023 Hrs.......................................................................$56,500
2007 Genie GTH1056, Stk# 6424, 10,000 lbs., 56 ft.,80% Foam Filled Tires, 1,464 hrs, Out Riggers, PerkinsEng. ..................................................................$42,500
2005 JCB JS130, Stk# 6360, EROPS, 2217 Hrs, 80%U/C, 28” Bkt, No Aux. Hyd. .................................$29,500
1997 Cat D6R XL, #6362, EROPS, A/C, Semi UBlade, 50% U/C, 3,091 hrs., 3 Shank Ripper.$69,500
"In Business for over 27 Years"www.hendrixmachineryllc.com
1-936-327-5430 • Email: [email protected] Se HablaEspañol
Genie GTH636, #6421, 6,000 lbs., 36 ft., 887 hrs,4WD, 90% Foam Filled Tires, JD Eng ............$29,500
Page 4 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WESTERN EDITIONCirculated Throughout • Alaska • Arizona • California • Colorado • Hawaii
• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming
Founder, Publisher & CEO Edwin M. McKeon Sr.Vice President Emeritus Hal Ewing
Western Publisher Edwin M. McKeon Jr.Editor In Chief Craig Mongeau
Associate Editor Peter SuanlarmEditorial Consultant Pete Sigmund
Production Mgr. John PinkertonController Tom Weinmann
Circulation Mgr. Rolf Krog Asst. Circulation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900
Toll Free 800/523-2200 Fax 215/885-2910
Web site www.constructionequipmentguide.comEditorial e-mail [email protected]
Advertising e-mail [email protected]
For advertising rates: Contact Edwin M. McKeon Jr.National Sales Manager215/885-2900
Toll Free 800/523-2200Fax 215/885-2910
e-mail [email protected]
Contact Dale Agnew• Arizona • Colorado • New Mexico • Oklahoma
• Texas • Wyoming
Toll Free 877/877-4997 Fax 972/695-6049
e-mail [email protected]
Contact Frank Strazzulla• Alaska • California • Hawaii • Nevada • Oregon• Utah • Washington
949/459-1767Fax 949/203-2859
e-mail [email protected]
Contact Patrick Kiel• Idaho • Montana
Toll Free 866/413-4265Fax 952/353-2750
e-mail [email protected]
Construction Equipment Guide Western Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.Contents Copyrighted ©2009, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings,letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are sub-ject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not nec-essarily reflect the policy or opinions of this publication.Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsi-ble for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
IN THIS ISSUESPECIAL SECTION…RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.
FEATURES…AGC OF TEXAS HOSTS TRADE & EQUIPMENT SHOW IN AUSTIN The event reinforced the two prevalent themes in 2009 for the salvation of the U.S. economy were highway construction and the need for immediacy, which puts this industry, once again, at the cutting edge of the economy.
KENWORTH RECEIVES GREEN WASHINGTON AWARD FOR HYBRIDSKenworth received recognition for its T270 and T370 diesel-electric hybridtrucks, T800 liquefied natural gas (LNG) vehicles, and award-winningefforts by its manufacturing plant in Renton, Wash., to build trucks in anenvironmentally sustainable manner.
KIRBY-SMITH ADDS TRAIL KING DEALERS IN TEXAS, OKLAHOMAIn June, Kirby-Smith Machinery added five new locations in north and west Texas and will be representing Trail King Trailers in all its Texas and Oklahoma locations.
GA.-BASED MANUFACTURER EXPERIENCES MAJOR GROWTHIn 1996, David Perry, CEO of HydrauliCircuit Technology (HCT) was busyassembling and selling hydraulic kits for attachments from his garage. It,wasn’t there for long, however, as growth came quickly for the Jonesboro,Ga., company; the following year Perry moved the operation out of thegarage and into a 3,000 sq.-ft.-facility and hired staff members.
CAT IT38G TOOL CARRIER NETS $44K AT WCA’SAUCTION IN PERRISMore than 800 bidders came from all over the world including attendeesfrom the Middle East, Canada, Mexico, Jamaica, Alaska and Hawaii.
LATE MODEL CAT IRON UP FOR GRABS IN TEXASWith more than 120 pieces of late model Cat equipment — including a variety of excavators, loaders, graders and track-type tractors — theHouston event drew bidders from across the United States and around the world.
33
37
32
31
12
17
18 BUSINESS CALENDAR35 CLASSIFIEDS38 COMING AUCTIONS
EQUIPMENT…14 VISIONAIRE Model 2900 Remote Coolant Heater20 NYE XCG2 Series Contractors Grapple
40
17
12
33
40
31
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 5
Witch Equipment Company, Inc.
Fort Worth, TX | 817-429-4824
Witch Equipment Company, Inc.
Hewitt, TX | 254-666-3344
Ditch Witch of New Mexico, Inc.
Albuquerque, NM | 505-345-1888
Ditch Witch of Houston
Houston, TX | 713-462-8866
Ditch Witch of East Texas
Tyler, TX | 903-592-6226
Ditch Witch Southwest
Lubbock, TX | 806-745-6866
Ditch Witch of Montana
Billings, MT | 406-252-7667
Ditch Witch of Oklahoma
Edmond, OK | 405-348-4633
Ditch Witch of Tulsa
Tulsa, OK | 918-438-1560
Ditch Witch of Arkansas
Springdale, AR | 479-419-9771
Ditch Witch of Arkansas
Benton, AR | 501-316-3200
Ditch Witch of Arizona
Phoenix, AZ | 602-437-0351
Ditch Witch of Southern Arizona
Tucson, AZ | 520-579-0261
Today’s Forecast: Heavy Metal Thunder.Ditch Witch® RT tractors are heavy-duty powerhouses that carve through dirt and rock with minimal engine
noise. So, you can plow, saw, and trench without a storm of protest from nearby residents. For more info
on the full RT line, see your dealer or visit ditchwitch.com.
ditchwitch.com
FREEDEMO
CALL FOR A
©2009 The Charles Machine Works, Inc.
Page 6 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 7
FCC EQUIPMENT FINANCING (A Caterpillar Company)
Jacksonville, FLDarold Longhofer (904)625-9259 • Cell (904)610-7939 • Home (904)880-3587
Great Used Equipment Values1970 EUCLID B30, S/N 62E1958 ........................$13,0001970 EUCLID B30, S/N 62E1821 ........................$13,0001970 EUCLID B30, S/N 62E1816 ........................$13,0001970 EUCLID B30, S/N 62E1957 ........................$13,0002004 JCB 714, S/N E0830195 ............................$53,6002004 JOHN DEERE 400D, S/N BE400DT201041 ........................................................................................$135,200
2006 KOMATSU HM300-0, S/N A11002 ..........$131,6001994 VOLVO A25C, S/N A25V8715 ....................$33,500(2) 1994 VOLVO A30, S/N V1487 ..............From $30,100(2) 1998 VOLVO A35C, S/N V5086 ............From $42,7002001 VOLVO A35D, S/N 61113 ..........................$73,000
1999 BLAW KNOX PF161, S/N 16126-04 ..........$24,3001998 BLAW KNOX PF3172, S/N 317211-08 ......$29,5002000 LEEBOY 8500, S/N 2497-8500 ..................$18,500
2006 DEERE 410G, S/N 946106 ..........................$46,0002005 JCB 214 SERIES III, S/N 904421................$20,7002004 JOHN DEERE 210LE, S/N T0210LE882955..........................................................................................$16,000
2002 JOHN DEERE 310G, S/N 907184 ................$24,2002004 JOHN DEERE 310SG, S/N 926142..............$29,0002004 JOHN DEERE 710G, S/N 939117 ................$45,0002003 VOLVO BL70D, S/N 10269 ..........................$28,200
2002 CBI 4000B, S/N 4840HZK34123A0660 ....$152,000
2004 AMPAC P33/23, S/N 33071104 ....................$6,0002001 BOMAG BW142PDB-2, S/N 136510511036 ........................................................................................$14,000
1994 DYNAPAC CA151PD, S/N 59810775 ..........$21,7002000 DYNAPAC CA250PD, S/N 65320989 ..........$31,1001996 FORD LN8000, S/N 1FDXR82EXTVA27463..........................................................................................$11,000
2006 HAMM 3410, S/N H1690654 ......................$37,0002006 HAMM 3410, S/N H1690638 ......................$38,0002006 HAMM 3410, S/N H1690694 ......................$38,0001988 INGERSOLL RAND DD90, S/N 5454S ........$13,0002000 INGERSOLL RAND PT125R, S/N 164701 ..$21,0002005 INGERSOLL RAND SD100D, S/N 151759 ..$61,5001998 INGERSOLL RAND SD100F, S/N 154044....$29,0001997 INGERSOLL RAND SD70D, S/N 148473 ....$19,5002000 INGERSOLL RAND SD70D, S/N 163541 ....$27,0002000 INGERSOLL RAND SD70D, S/N 165166 ....$27,7001999 INGERSOLL RAND SD70F, S/N 157999......$19,0002006 INGERSOLL RAND SD70F, S/N 191728......$37,4002003 INGERSOLL RAND SD77F, S/N 174481......$24,5002005 INGERSOLL RAND SD77F TF, S/N 179314..........................................................................................$27,500
(2) 2005 SAKAI SV505T, S/N VSV16-40175........$44,6001999 STONE 3100 WOLFPAC, S/N 2699294 ........$3,0001999 Vibromax W1103D, S/N JKC8302602 ........$33,2002003 VIBROMAX W1105D, S/N JKC8305009......$32,500(2) 2006 WACKER BS50-2I, S/N 88591....................$800(2) 2003 WACKER RT820, S/N 5396924 ..............$6,500(4) 2006 WACKER RT82SC, S/N 5671753 ............$9,200
2000 CONCORD CCP 36M15, S/N1M2K197C21M017771 ......................................$121,5001999 Mack MR688, S/N 1M2K189C5XM013746..........................................................................................$89,800
2004 MACK MR688S, S/N 1M2K197C74M023571 ....................................................................................$182,300
2005 POWERSCREEN 1400, S/N 6614644........$101,5002006 POWERSCREEN M85, S/N 6103501 ..........$38,5002007 RADIAL CONVEYOR STACKING, S/N 24X60-07-0101 ....................................................................$12,200
2006 BL PEGSON 1000SR, S/N 100312DDSR ..$362,0002004 CEC 102X115, S/N 4538 ..........................$161,5002007 EAGLE 1200-25, S/N 30696......................$346,3002003 EXTEC 1013, S/N 7864 ............................$200,5002001 EXTEC MEGA-BITE, S/N 6024 ..................$136,2002006 IROCK RDS15H, S/N P90216 ..................$451,300
2008 Bengal TG1000P ..........................................$9,6002005 GOMACO GT3600, S/N 902900-641 ..........$90,4002006 GOMACO GT3600, S/N 902900716 ..........$120,000
2006 ATLAS COPCO ECM590, S/N 11457 ........$161,5002008 DITCH WITCH JT1220, S/N J1220A80000278 ....................................................................................$64,000
2007 DITCH WITCH JT520, S/N CMWFT5XXE70000081..............................................................................$40,000
2001 BOBCAT 331D, S/N 232511818 ..................$12,2002002 BOBCAT 341D, S/N 233212073 ..................$19,1002001 DAEWOO S170-V, S/N 1041 ......................$30,0002001 DEERE 200LC, S/N 501934 ........................$32,0002004 DEERE 330CLC, S/N 82918 ........................$54,5002004 HITACHI EX550LC, S/N 7417....................$124,1002006 HITACHI ZX350LC-3, S/N FF00ASP920074 ......................................................................................$100,000
2004 JOHN DEERE 160C, S/N FF160CX044325 ..........................................................................................$47,500
1998 JOHN DEERE 230LC, S/N FF0230X060077..........................................................................................$33,200
2004 JOHN DEERE 330C LC, S/N 082992 ..........$67,0002003 JOHN DEERE 330CL, S/N 082448 ..............$59,0002005 JOHN DEERE 330CL, S/N 083241 ..............$76,0002005 JOHN DEERE 330CL, S/N 804394 ..............$76,0001999 JOHN DEERE 330LC, S/N FF0330X080564..........................................................................................$39,500
2004 JOHN DEERE 330LC, S/N 082657 ..............$67,0002003 JOHN DEERE 450CLC, S/N FF450CX091265 ......................................................................................$80,300
1999 JOHN DEERE 450L, S/N FF0450X090297 ..$49,0001999 JOHN DEERE 450LC, S/N 90419 ................$51,7001988 JOHN DEERE 790D, S/N 790DL007763......$12,2002006 KOBELCO 70SR, S/N YT0306041 ....................POR2002 KOBELCO SK200SR, S/N YB0201701 ........$38,5002001 Kobelco SK250, S/N LL08U0421................$35,9001998 KOBELCO SK300LC, S/N YCU0961 ............$24,5002004 Kobelco SK330, S/N YC07-U0745..............$50,1002003 KOBELCO SK480, S/N YS06U0273 ............$56,0002007 KOMATSU 78MR, S/N 1002449..................$43,5002001 KOMATSU PC300LC, S/N A84699 ..............$50,0002000 KOMATSU PC300LC-6LE, S/N A84629 ......$45,500(2) 2004 KOMATSU PC300LC-7, S/N J20408......$87,5002003 KOMATSU PC400LC-6, S/N A85328 ..........$85,0002005 KOMATSU PC600LC-7, S/N 20108 ..........$225,0002007 TAKEUCHI TB145, S/N 14516716 ..............$34,1002007 TAKEUCHI TB175, S/N 17515812 ..............$53,4002003 VOLVO EC210BLC, S/N EC210BLC11522 ..$49,8002007 VOLVO EC210CL, S/N 210C110192 ............$75,0002003 VOLVO EC240BLC, S/N V10780..................$58,500(6) VOLVO EC330BLC, S/N V10081 ..........From $60,8002005 VOLVO EC360BLC, S/N 11632 ....................$93,6002006 VOLVO EC460BLC, S/N 80037 ..................$139,500
2002 JOHN DEERE 843H, S/N 882070 ................$49,0001993 MORBARK WOLVERINE, S/N 4172 ............$19,8002000 MULTITEK 3040-90XP FIREWOO, S/N 5050200 ................................................................................$36,500
2005 TIMBER KING TK722, S/N C10300205 ....$109,5002005 WARATAH HTH622B, S/N 622342 ..............$48,500
2007 PEMBERTON CAST, S/N C/EGR-004-4-0606 ......................................................................................$11,600
(3) 2007 PEMBERTON MATERIAL, S/N MDG300-194-5-0607 ....................................................................$11,600
2006 RAMMER S-27, S/N 27AAA0667 ..................$8,6002003 STANLEY MB50EXS, S/N 2279....................VALUE!
2007 MORBARK 4600XL, S/N 188-1042 ..........$382,800
2007 CLARK CMP70, S/N CMP570D-0894-9590 ........................................................................................$31,400
2006 GEHL RS5-34, S/N RS5JW0912223 ..........$26,0002007 GENIE GTH-5519, S/N 16804 ....................$31,500(2) 2004 KOMATSU FG35ST-7, S/N 103491..........$8,5001994 Moffet M5000, S/N 4414 ..............................$4,400(2) 2005 PRINCETON PB-50, S/N P10462 ..........$18,2002000 Skytrak 8042, S/N 13340............................$21,100(2) 2006 TAYLOR THC-300S, S/N 33008 ..........$100,0002006 TAYLOR THC-400L, S/N 33106 ................$116,500
2007 DITCH WITCH FX30, S/N FX30X0436 ........$27,5001996 INGERSOLL RAND 185, S/N 144690............$3,800
(3) 2006 MACK CV713, S/N 1M2AG11C16M030801....................................................................................$78,000
2004 JOHN DEERE 670CH, S/N DW670CH590183 ......................................................................................$82,100
2000 KOMATSU GD530A-2, S/N 210391 ............$51,5002004 KOMATSU GD655-3C, S/N 51038 ............$112,300
2002 Labounty UP30, S/N UP30204 ..................$26,200
1973 Bros LSPRM8A, S/N 4150 ............................$6,000
1988 JOHN DEERE 862B, S/N 744221 ................$17,000(3) 1979 TEREX TS14B, S/N 17U0T61100 ........................................................................................From $13,000
1975 ROME R67H, S/N R67H10516......................$1,500
2007 EXTEC E7, S/N 10502 ..............................$155,0002006 WILDCAT 510 COUGAR, S/N1W9SS26156F351462 ........................................$63,500
2002 BOBCAT A300, S/N 539911335 ..................$17,1002007 DITCH WITCH XT850, S/NCMWXT850C8C80000256....................................$16,5001998 JOHN DEERE 8875, S/N 040509 ................$10,000
2003 JOHN DEERE 648G-III TC, S/N 588699 ......$45,500
2005 ZIPPER AZ-480HD, S/N 109FS08235U022988....................................................................................$35,000
(2) 2000 JOHN DEERE 555G, S/N 890992 ..........$21,5002005 TAKEUCHI TL140, S/N 21402461 ..............$17,000
2001 DEERE 550H, S/N 898990 ..........................$31,0002004 DEERE 650H, S/N 930092 ..........................$35,5002004 DEERE 650H, S/N 931730 ..........................$35,5002004 DEERE 650H LGP, S/N 926713 ..................$46,5002004 DEERE 700H, S/N 938631 ..........................$52,5002000 JOHN DEERE 450H, S/N 883527 ................$23,5002003 JOHN DEERE 450H, S/N T0450HX913212 $27,5002007 JOHN DEERE 450J LGP, S/N 117871 ........$40,8001998 JOHN DEERE 650G LGP, S/N 84881.......... $24,500(3) 2000 JOHN DEERE 650H, S/N 891545 ........................................................................................From $29,500
2005 JOHN DEERE 850JLT, S/N TO850JX113640 ......................................................................................$117,000
2004 KOMATSU D39EX-21A, S/N 1578 ..............$39,6002004 KOMATSU D39EX-21A, S/N 1553 ..............$39,600(2) 2005 KOMATSU D39EX-21A, S/N 1721 ........$45,100
2002 MASSEY FERGUSON 243, S/N J23115 ........$6,1002005 MASSEY FERGUSON 461, S/N EP10060......$9,200(4) 2003 MASSEY FERGUSON MF451-4, S/N BN15020 ......................................................................From $7,000
2002 McCORMICK F70XL, S/N PFKCM50202 ....$11,200
(2) 1999 TRAILER HEATED, S/N 1GRAA0620XB024202 ................................................................................$3,900
1997 TRAILER REFRIGERATED, S/N1GRAA062XVB089443 ..........................................$7,300
2007 SMITHCO SL24034, S/N 1S9SS40227L476357 ..................................................................................$33,000
1999 DITCH WITCH 3700LJ, S/N 3X0647 ............$3,900
1987 LIEBHERR LTM1160, S/N 12413 ..............$295,2001988 MACK RD690SX, S/N 1M2P199C7JW003016 ....................................................................................$62,000
2006 STERLING LT7501, S/N 2FZHATDCX6AV55737 ................................................................................$152,400
1999 DIAMOND Z 1352BL1, S/N 1D9FX4232XN147001 ............................................................................$150,800
2007 Vermeer TG7000, S/N 1VRY4536271000154 ..................................................................................$378,000
1999 DEERE 644H, S/N 572749 ..........................$46,7001999 JOHN DEERE 444H, S/N DW444HX573676 ........................................................................................ $26,5001999 JOHN DEERE 544H, S/N 572508 ................$35,0002000 JOHN DEERE 624H, S/N 578008 ................$41,0002003 JOHN DEERE 724J, S/N 588116 ................$70,500(2) 2006 KAWASAKI KSS65Z-V, S/N 65C4-5475................................................................................From $53,200
1998 KOMATSU WA180-3L, S/N A90247 ............$27,4001997 KOMATSU WA250, S/N A70085..................$24,2002006 KOMATSU WA250PT-5L, S/N A79287 ........$63,0001998 KOMATSU WA450-3, S/N 53217 ................$36,9002001 VOLVO L70D, S/N V19086 ..........................$41,4002005 VOLVO L70E, S/N V60611 ..........................$71,000
WHEEL LOADERS
TUB GRINDER
TRUCK CRANES
TRENCHER
TRAILER SIDE DUMP
TRAILER - REEFERS
TRACTORS AG
TRACK TYPE TRACTORS
TRACK LOADERS
STABILIZER/RECLAIMER
SKIDDER
SKID STEER LOADERS
SCREENING PLANTS
SCRAPER - PULL TYPE
SCRAPERS - MOTORS
PULVERIZER
MULTI-PROCESSOR
MOTOR GRADERS
MIXER
MISCELLANEOUS
LIFT TRUCKS
HORIZONTAL GRINDERS
HAMMERS
GRAPPLES
FORESTRY
EXCAVATORS
DRILLS
CURB & GUTTER MACHINES
CRUSHERS
CONVEYORS
CONCRETE PUMPS
COMPACTORS
CHIPPER
BACKHOE LOADERS
ASPHALT PAVERS
ARTICULATED TRUCKS
Machines are located in various parts of the U.S. Please call for locations and pricing. Visit our website at FCCEF.com for pictures and more information. Call Darold Longhofer at (904)625-9259 or Cell (904)610-7939 or Home (904)880-3587. Allen Breinig at (904)625-9290. Tom Camphire at (904)625-9263.
In Mexico call Luis Ramirez at 01 81 24 51 42 34 or cell 044 81 15 08 47 96. El Cercado (Monterrey) NL. Email [email protected]. [email protected] [email protected]
Page 8 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
C H A M P I O N S A L E S & S E RV I C EBRIDGE THAT GAP
<15,000 lbs. >30,000 lbs.
Now you can choose the right-
sized machine to fit those mid-size
grader projects!
Get the agility, economy and
transportability of a Champion
compact grader. And get a full
23,500 lbs. of hard-working
power and torque to move
big loads efficiently.
That’s what you call a machine built
to produce. And that’s what we call
the Production Class C110 Grader:
the new heavyweight Champion!
Call your Champion dealer for
details or go online for the latest
updates on “The Main Event”
demo tour in your area.
C110
ARIZONAVolvo Construction Equipment & Services
Phoenix Tel: 888-353-2253
CALIFORNIA Volvo Construction Equipment & Services
Bakersfield Tel: 661-387-6090
Corona Tel: 951-277-7620
Fresno Tel: 559-834-4420
Livermore Tel: 925-294-7770
Los Angeles Tel: 626-337-4545
Sacramento Tel: 916-641-1994
San Diego Tel: 619-441-3690
San Leandro Tel: 510-357-9131
COLORADOPower Equipment Company
Colorado Springs Tel: 719-392-1155
Denver Tel: 303-288-6801
Grand Junction Tel: 970-243-0722
LOUISIANA Four Seasons Equipment, Inc.
Lake Charles Tel: 337-626-6000
TEXAS Cooper Equipment Company
San Antonio Tel: 210-657-5151
Four Seasons Equipment, Inc.
Dallas Tel: 214-388-1700
Houston Tel: 281-807-9777
WASHINGTON Mid-Mountain Machinery, Inc.
Clarkston Tel: 509-758-8235
Spokane Tel: 509-838-3546
Volvo Construction Equipment & Services
Seattle Tel: 206-763-9300Big ideas at work in small graders!
www.championmotorgraders .us Tel: 704.392.1038
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 9
“You Are In Good Hands”
The Joe McElreath Company, Inc. has beenin business for the past 47 years. Keepingwith new technology of the time, we begandirectional boring in 1993. Joe McElreathhas owned and operated the company sinceits inception in 1962 and has made the com-pany one that the industry has come to relyupon. We pride ourselves in owning all ofour equipment ranging from directional bor-ing equipment to trenchers, Vac-Trucks,mud motors, mud trucks, 16” air missile with900 cfm Sullair air compressor to MCM 2000& 4000 American Auger cleaning systems.Along with excavators, front end loaderbackhoes, track type dozer, equipment todrill both rock and dirt, walk-over and wire-line locating systems, we own and operateover 30 pieces of backup equipment avail-able for all our jobsites. We have the capa-bilities, the equipment and the personnel tohandle up to 5 complete horizontal bore jobsat the same time.
Lic. No. 51508
JJooee MMccEEllrr eeaatthh CCoo.. ,, IInncc ..HORIZONTAL DIRECTIONAL BORING
800-660-1165
Reliable Efficient
Founded in 1962 and Fully InsuredTexas, Oklahoma, Arkansas and Louisiana.
Fax: 940-668-8828Email: [email protected]
Page 10 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
0% FOR 36 MONTHS ON SELECT LIEBHERR EARTHMOVING EQUIPMENT
OTHER RATES AVAILABLE SOME RESTRICTIONS APPLY
PROGRAM EXPIRES NOVEMBER 30, 2009
SEE YOUR LOCAL LIEBHERR DEALER FOR DETAILS
4100 CHESTNUT AVENUE NEWPORT NEWS, VA 23607 USA PH 757-245-5251 FAX [email protected] WWW.LIEBHERR.US
LIEBHERR EQUIPMENT IS BUILT TO LAST…
THIS OFFER ISN’T!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 11
WHATEVER YOUR HYDRAULIC KIT REQUIREMENT MAY BE...
WE’RE ON TOP OF IT!Whatever the carrier machine, and whatever the attachment, the friendly professionals atHydrauliCircuit Technology stand ready to deliver the hydraulic kit that you need. Our new state-of-the-art 35,000 square footinstallation, production, and research facility is designed toenhance our product and capa-bilities, and to enable us to carry on the reputation for excellence that we have cultivated during our twelve years of constant growth and improvement.
Digital automated tube bending,phase-pulsedautomatedwelding, and in-house powder-coating capabilities are just a few of
the quality and value of every kit we sell.
If you have ever installed a competitor’s hydraulic kit and thought...“somebody should do a better job with this!”,...then give us a call with your next kit requirement ,because....We do, and we’reready to prove it!
Page 12 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AGC of Texas Hosts Trade & Equipment Show in Austin Associated General Contractors (AGC) of Texas host-
ed its 26th annual Trade & Equipment Show inAustin Convention Center, Oct. 19 and 20.
The event reinforced the two prevalent themes in 2009 forthe salvation of the U.S. economy were highway construc-tion and the need for immediacy, which puts this industry,once again, at the cutting edge of the economy. It is withthese two themes in mind that AGC of Texas created the2009 theme for the Trade and Equipment Show.
The AGC of Texas Trade and Equipment Show is still thebiggest trade show in Texas, and drew people in the thou-sands. The show attracted highway, heavy, industrial, munic-ipal, and utility contractors, as well as banking, computer,demolition, distributor, finance and insurance firms.
Additionally, manufacturers and suppliers along withTxDOT officials, county commissioners, and city managersattended the event.
For more information, visit www.agctx.org. (This is the first of a two-part coverage of the 26th annu-
al Trade & Equipment Show in Austin.)
(L-R): Wesley Guidry of Cherry Crushed Stone inHouston visits Tom Hlawek of Bane Machinery inHouston and Charley Seward of Midland.
Lee Garza (L), the city of Austin, learns about thecapabilities of Rock Monsters in Pflugerville, Texas,from Colum Kelly.
Trevor Bray (L) of Craig Olden Inc. tells Mike Serranoof Martin Marietta Materials in Powderly, Texas,about the history of gabions.
(L-R): It is “Meet the Managers” time for Rick Gray ofMartin Marietta Materials in Powderly, Texas, andChuck Thompson, Mike Wenske and Ron Jacobson ofKirby-Smith.
(L-R): Gavin Cole, HOLT CAT, tells J.B. Souther, the cityof Austin, about new Caterpillar products in its dis-play.
(L-R): Sharon Patterson and Collen Athey, the city ofAustin’s purchasing department, have been learningabout the new John Deere equipment offered byWilliam Risinger of RDO in Austin.
(L-R): Bob Martin of H&E Services explains H&E’scrane capabilities to Dan Felix of Zachry Constructionand Joe Collins of Precision Resource Co., both in SanAntonio.
(L-R): Kyle Smith of Texana, Udo Boersh of Hi-WayEquipment and Greg Jones of Kawasaki are ready forall questions concerning Case and Kawasaki equip-ment.
The 26th Annual AGC of Texas Trade and EquipmentShow was officially opened by Speaker Joe Straus IIIcutting the ribbon. (L-R) are Jack Albert, AGC of Texas;Reece Albert; Representative Drew Darby, R-SanAngelo; Speaker Joe Straus, III, R-San Antonio; JonAbrams, JD Abrams; Trade Show Committee ChairmanBill Hogan, Ritchie Bros. Auctioneers; Immediate PastPresident Tracey Schieffer, AL Helmcamp; and SethSchulgen, Williams Brothers Construction.
Kent Dosch (L) of Widgeon Construction Inc. inOrange, Texas, finds out about the upcoming RitchieBros. auctions from Alan McVickers.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 13
Contact Dave Yungen951.892.3381 • CA
RSC Equipment Rental • Fall Savings!
RSCrental.com • Quality Used Rental Fleet
Contact Don Schultz928.273.4800 • AZ
[email protected] Locations Nationwide
2004 534D9 9K Gradallfoam filled tires, 2350 hours
Starting @ $29,500
2005 Freightliner Semi Truck, 120k miles, unitin So. Cal., wetkit, 10-speed trans, Eq# 589362
Sale Price $45,500
2005 Terex 5519-500lb Reach Forkliftfoam filled tires
Starting @ $17,900
2005 Gehl RS5-34 6K Reach Forkliftfoam filled tires, low hours
Starting @ $24,500
2004 Water Truckf, s, r sprayers, 6-speed manual trans.
Starting @ $19,900
2005 Skyjack 7127 Big Deck Scissor Lift, gas/ propane
Starting @ $11,950
2005 John Deere SkiploadersStarting @ $18,500
2005 LIGHT TOWERSStarting @ 3,500 AZ, CA
Twice the speed & accuracy of any 3D system.
You can GRADE AT FULL SPEED, and still achieve even
FINER RESULTS than ever before - in a SINGLE FINISH PASS.
Get FINISH QUALITY from your dozer and MAKE MORE
MONEY by REDUCING the TIME and ENERGY it takes to get
to grade.
Topcon’s 3D-MC2 takes your operation to a whole new level.
Get there first!
combined with GPS, accurately controls the dozer’s blade at a speed of 100 times a second!
Inertial sensortechnology,
Visit our site to view testimonials of real people using 3D-MC2.
It’s time.topconpositioning.com/3dmc2
‘It’s at least twice as fast.We‘re getting to grade faster,
and we don’t have to follow
it with a motor grader.’
Olin EllsworthRonald Franks Company
Page 14 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Casper307.234.7777
Denver303.341.5555
Grand Junction970.858.0093
Hobbs575.397.0808
Albuquerque505.897.5929
St. George435.656.0502
Salt Lake City801.978.3300
Your Rocky Mountain Rental CompanyWith 7 strategically placed locations throughout the Rocky Mountain
region, Worldwide Rental Sertvices is here to serve you better and save
you money. We offer high quality, late model equipment for rent and sale
at competitive rates. Please feel free to let us show you why WRS is
your 1st choice for equipment in the Rocky Mountain region.
WWW.WORLDWIDERENTALSERVICES.COM
Visionaire’s Model 2900 Idealfor Off Highway Vehicle Cab
Visionaire Inc. of Grand Prairie, Texas,announced the Model 2900 remote coolantheater for applications where engine coolantis not readily available to heat an off high-way vehicle cab.
The compact model 2900 contains aWebasto coolant heater that uses diesel fuelto generate 8,600 to 17,000 btu/h (2.5 to 5kW) of heat. The 2900 also houses thecoolant reservoir, filters, pumps and plumb-ing necessary for a self contained heatsource. An available auxiliary fuel tank canbe mounted beside the unit, reducingexposed plumbing.
Available alone or in combination withvarious Visionaire air handlers, the 2900reduces the number of redundant compo-nents inside compact cabs. In crane, boomtruck, and mining equipment cabs, designengineers often have to find space for bothan air conditioner and a diesel air heater.Two separate systems mean separate inletand outlet ductwork, blowers, and controls.Often placed under a seat pedestal or arm-rest, the heater becomes difficult to serviceand is neglected.
The 2900 allows cab designers the flexi-
bility to integrate heating, cooling and cabpressurization into a single in-cab systemkeeping combustion, fuel and noise outsidethe cab. The 2900’s steel enclosure allowsvarious mounting configurations and easyaccess for service.
For more information, call 972/647-1056or visit www.visionaire-inc.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 15
Page 16 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WHEEL LOADERS 2005 JD 444J, AC, 3307 hrs, QC w/2.5 yd bkt, 20.5x25’s, Sharp!..............$65,9002002 Volvo L90D, 7396 hrs, AC, 3.5 yd bkt, RC, 20.5R25, 80%, Sharp! ..$66,9002004 Komatsu WA250PT-5L, AC, QC, 4233 hrs, 3rd valve, 3 yd ..............$63,9002004 Komatsu WA250PT-5L, AC, QC, 6316 hrs, 3rd valve, 3 yd ..............$61,9002007 JD 544J, AC, 10,175 Light Duty Hrs, new tires & paint, Nice! ..........$62,9002002 Volvo L70D, cab, AC, heat, QC, 3 yd bkt, 58” forks, Nice! ................$57,5001997 Kawasaki 70Z IV, C/H, 7700 hrs, 3.5 yd, new paint, 95% L5 tires ....$44,9002005 Cat 906, A/C, 2031 hrs, QC bkt & forks, new paint, Nice!..................$41,5001994 Case 621B, C/H, 8712 hrs, 2.5 yd. bkt, New Paint & tires ................$39,9002006 Case 621D, Cab, A/C, JRB QC, 6933 hrs, new paint, new tires ....COMING!1998 JD 444H, cab, AC/heat, 12,218 hrs, QC w/2.5 yd bkt, Sharp! ..........$39,950(2) 1978 JD 544B, C/H, 2 yd. bkt., 3976 & 11,000 hrs, Very Clean! ..........$17,950
LOADER BACKHOES & SKIP LOADERS2007 CASE 570M XT, 297 hrs, AC, 4WD, Ride CTL, Turbo, 3 pt, bld........$46,9002005 JCB 214, C/H, 4x4, E-Hoe, Pilot Ctls, 919 hrs, 36” bkt., 3rd valve & Q/C tofront bucket, (4/1 bkt avail), 50% tires, Like New Condition ........................$42,9002005 Case 580SM II, cab, heat, 4x4, Ext. hoe, 4-in-1 bkt, 3272 hrs, Clean! ....Call2005 Case 590SM II, cab, heat, std hoe, 4x4, 2888 hrs, X Sharp! ............$42,900
EXCAVATORS2000 Cat 325BL, AC, 5,119 hrs, aux hyd, sharp, local one owner ............$68,9002003 Cat 315CL, C/AC/H, 5021 hrs, 48” Bkt, V. Sharp & Tight! ................$58,9001996 Cat 320BL, C/AC/H, 8100 hrs, QC w/48” Bkt, 24” bkt avail ..............$51,9002003 Cat 311 CU, AC, 1894 hrs, zero turn, 34” bkt, Tight, Nice! ..............$45,9002003 Komatsu PC120-6E0, C/AC/H, 2380 hrs, plumbed, V Sharp! ..........$48,9001996 JD 590D, 6738 Hrs, Exc. U/C, 8'6" wide, Q/C w/36” bkt. Sharp!........$31,5002001 Komatsu PC78US-5, A/C, 3738 hrs, rubber pads, new paint............$28,5002000 Bobcat 334 Mini, 928 hrs, Exc. Rubber Tires, Tight & Sharp! ..........$15,900
CRAWLER DOZER/LOADER2006 JD 650J, A/C, 6-way, 2700 hrs, Exc. U/C, Clean! ..........................COMING!2004 JD 755C, CRL. LDR., AC, only 1631 Hrs, one owner, new uc ..........$84,9002000 JD 450H LT, cab, AC, 6 way, 2275 hrs, 75% UC, Very Sharp! ..........$39,9502000 JD 450H LGP, 3990 hrs, new UC, new poly paint..............................$35,9002000 Cat D3C XL, hystat, cab, heat, new Cat UC, 4110 hrs, Nice! ............$31,5001999 Komatsu D39E, 2545 hrs, 6 way, 85% uc, new paint, V. Good!........$28,9001995 JD 550G IV, 6 way, 2703 hrs, 2 owners, Very Nice............................$26,9001991 Cat D4H, 5203 hrs, new Cat UC, 6-way, Very Sharp, 1 Owner! ........$32,9001979 JD750, cab, heat, str. blade w/tilt, low hours, 80% uc, Clean! ..........$23,9101991 JD550G, 6 way, 85% UC, new poly paint, Tight & Nice! ....................$23,9001997 Cat D4C, 6 way, 3652 hrs, 60% UC, Very Clean! ..............................$22,5001986 Case 450C, 6 way, 4674 hr, recent new UC and Paint, Exc! ............$17,500
SKID STEERS & FORKLIFTS2004 Case 40XT, cab, heat, 925 hrs, aux hyd, 65% tires, Sharp! ..............$15,9002004 JD 250, cab, AC, 1239 Hrs, 50% 12x16.5 tires w/steel tracks ..........$14,9502004 Cat 257B, track skid steer, 1870 hrs, excellent UC Sharp! ................$16,4952005 JCB 506C, 1250 hrs, 6000 lb, 36’ reach ht, 90% tires, like New ......$28,9002005 Sky Trak 6042, 1700 hrs, 4WD, 42’ reach, 70% tires, tight, Nice ......$29,7502000 Sky Trak 8042, 8000 lb, 42’ reach, 4675 hrs, 80% tires, Exc! ..........$25,9002000 JCB 506C, 6000 lb, 42’ reach, 3500 hr, good tires, Exc Cond!..........$19,5001998 JCB 930, 4x4, 6000 lb, 21’ strt mast w/side shift, Very Nice! ............$18,950
BOOM/MAN LIFT1999 JLG 450A, Genie Z45/25J, 50' art. boom, dual fuel, Both Nice ........$17,9001999 JLG 600S, 60' straight boom, 3800 hrs, dual fuel, Nice!....................$19,950
COMPACTION2004 IR SD45D, 54" smooth drum, only 490 hrs ........................................$27,900
(SEE WEBSITE FOR PHOTOS)
2002 Volvo L190D
Cab, Heat, A/C, 7396 hours, Volvo QC w/ 3.5 yd. bucket, ride control,20.5R25 tires @ 80%, exceptionally sharp, all original, lower hour loader,very tight, forks available ........................................................$66,900
Visit: www.hulls151.comfor Complete Inventory & Photos
HULL’S IMPLEMENT920-324-5341www.hulls151.com
Jct. Hwy 151 & 26 N.E. of Waupun, WI
UO Taps Ore.-Based K&E Excavatingfor Construction of New Ducks Arena
than 24 months from start to finish.Salem, Ore.-based K&E Excavating Inc. has been on the
job since early this year. The pace during the first fewmonths of K&E’s $5.9-million contract was breakneck;excavation of 320,000 cu. yds. (244,660 cu m) was substan-tially complete in 67 days.
K&E took an area equivalent to 3.5 city blocks down 30
ft. (9.1 m), on average, with the deepest sections reaching 44ft. (13.4 m). The company ran a Caterpillar 345 excavatorand two 330s, as well as a Caterpillar D7 dozer leased fromHalton Co. Additional trucks were hired from companiessuch as Delta Sand & Gravel Co. (Eugene) and BandonConcrete & Development of Bandon, Ore.
“We were running 20 to 30 trucks all day long,” said K&E
DUCKS from page 1
see DUCKS page 24
K&E took an area equivalent to 3.5 city blocks down 30 ft. (9.1 m), on average, with the deepest sections reach-ing 44 ft. (13.4 m).
Ground breaking for the 397,825-sq.-ft. (36,960 sq m) arena took place in February. The first Ducks game in thenew arena is scheduled to take place as early as December of next year, giving general contractor HoffmanConstruction and approximately 70 subcontractors less than 24 months from start to finish.
Crushing, Screening & Recycling Section
Since going into operation in 2007, theSennebogen 850 locomotive units at theAxis location of Tube City IMS (TCIMS),one of the world’s leading steel servicesorganizations, have seen an impressive15,000 hours of service. Working in con-junction with other rubber-tired Sennebogenmachines — 850 M and 870 M — the twolocomotive units charge buckets for the site’smelt shop and have played a major role inmaximizing the site’s production volume.
“Visitors to the site are always extremelyimpressed with the kind of volume we turnout here,” said Dave Chapman, TCIMS gen-eral manager, Mill Service Group. “Wecharged over 1.7 million tons of scrap in2008. That’s a phenomenal amount of workfor a yard designed to operate with a month-ly maximum inventory of 80,000 tons ofmaterial. Our Sennebogen machines havedefinitely been a major factor in helping usachieve this kind of volume.”
Sennebogen Fleet Keeps Things Moving at Axis Site
The TCIMS Axis location is a hub ofactivity. Scrap metal is delivered to the yard
by rail car, truck and barge. TCIMS 50 ton(45 t) haul trucks deliver scrap off-loadedfrom barges at the company’s dock facility,while scrap from outside suppliers arrives intrucks and by rail cars on rails that runthrough the yard. Equipped with inter-changeable grapples and magnets, the site’srubber-tired Sennebogen machines movearound the dirt and gravel yard working theoutside scrap pile lines and handling all ofthe truck deliveries. The Axis site adminis-ters and provides mill services for all scrapmetal coming into the yard.
“The Sennebogen 850 locomotive units’primary purpose is to load charge bucketswith scrap,” said Darrin Blount, TCIMSscrap yard and dock superintendent. “Theunits’ Caterpillar engines and hydraulic sys-tems are used to move them along rail trackswithin the yard. Using 2-yd. (1.8 m) grap-ples, the 850 special locomotive cranes usu-ally unload scrap from rail cars directly intothe charge bucket, and at other times unloadit onto inventory commodity piles to becharged later. The loaded charge buckets arethen shunted to the melt shop via Kress RTpallet carriers. It’s a pretty efficient operation
that allows us to process the impressiveamount of material we have managed in thelast two years.”
TCIMS Maintenance Superintendent TimMiddleton said mounting the 850 materialhandlers onto the locomotive cars and get-ting them operational was a joint co-opera-tive effort between Sennebogen ServiceManager Jim Westlake, Danny Wright atTractor & Equipment Company in Mobile,Ala., and the yard’s own maintenance crew,with the latter putting in most of the workinvolved with the installation. Routine main-tenance on the machines is done onsite byTCIMS technicians, while service and partsfor the machines are provided by Tractor &Equipment, said Middleton.
Sennebogen Elevating Cab a Winner With TCIMS Operators
The elevating cabs on the Sennebogen850 locomotive units were deciding factorsin the acquisition of the units and haveproven to be important in increasing theirefficiency for this application, saidMiddleton.
“Being able to look into the scrap rail cars
as we unload them is an absolute necessity,”said Middleton. “The elevating cabs on ourSennebogen 850 locomotive units enable usto do that. The elevating cabs on our mobilemachines enable us to do the same thingwith trucks and trailers that come into theyard. The all-round visibility offered by thecabs saves time, eliminates guessing and hashelped us eliminate potential damage to railcars and trucks and trailers.”
The Axis location management teamagreed that their Sennebogen 850 locomo-tive units are simple to use and service, andwith a swing speed from 0 to 6.5 rpm theyhave a higher cyclical rate for handlingmaterial than other manufacturers’machinesthey have used with the locomotive applica-tion in the past. Reliability, maneuverabilityand purpose-built efficiency also haveproven to be important post-purchasestrengths of the machines, according to thecompany.
For more information, call 877/309-0099or visit www.sennebogen-na.com.
Sennebogen 850 Locomotive Units Keeps Production Rolling
The hydraulically elevating cab on all the Sennebogen units give them a perfect viewinto the railcars.
The Sennebogen 850 special loco-motive crane with its long
reach works the pile.
Page 18 • November 7, 2009 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
November 19-20, 2009 – Convention.The Ohio Aggregates & Industrial MineralsAssociation (OAIMA) is going to hold theirAnnual Meeting & Convention at theColumbus Easton Hotel in Columbus, Ohio.For more information, visit their website atwww.oaima.org or call to make reservationsat 614-414-5000.
December 2-3, 2009 – Forum. TheNational Utility Contractors Association hasscheduled the Safety Directors Forum (SDF)at the New York Hotel, Las Vegas, NV. Forfurther information please contact the NUCAat 703-358-9300.
January 10-13, 2010 – EXPO ‘10.National Utility Contractors Association UtilityConstruction Expo, Walt Disney WorldDolphin Hotel, Orlando, FL. NUCA is locatedin Arlington, VA. Call 703-358-9300 for fur-ther information.
January 13-15, 2010 – EXPO ‘10. AGCONNECT Expo - Preview Day January 12,2010 (by special admission), Orlando, FL.AG CONNECT Expo provides a world-classinternational forum for agriculture industryprofessionals to share global agriculturalideas and management trends. For informa-tion please call 800-867-6060.
February 7-10, 2010 – SHOW. THERENTAL SHOW returns to Orlando, FL at theOrange County Convention Center. The showwill be in the North-South building, which iswhere the 2006 Show was held. Exhibitorsand Rental Store Attendees can call 800-334-2177.
March 17-20, 2010 – CONVENTION ‘10.Mark your calendar! AGC’s 91st AnnualConvention will be held at the MarriottOrlando World Center in Orlando, FL. Moreinformation will be posted as soon as it isavailable.
BusinessCalendar
Terex Corporation has announced details of a majorstrategic initiative to create one of the world’s largest suppli-ers of mobile crushing and screening equipment solutions byuniting its Terex Pegson and Powerscreen products andservices under one powerful name — Powerscreen.
The move by U.S. owner Terex Corporation, the latest ina series of initiatives designed to better serve its customersand bolster continued growth, follows a wide-rangingreview of its operations and means that all products andservices bearing the Terex Pegson name and image will nowcarry the Powerscreen brand. Crushers also will be instantlyrecognized by their new coating in “Powerscreen green.”
Pat Brian, Powerscreen global sales director, said: “Thisis the final step in a careful process that brings together thesetwo powerful names in crushing and screening and allows usto successfully leverage the strength of one reinforced brand,to make Powerscreen the premier name in mobile crushingand screening products across the globe.
“This new branding strategy accurately reflects our busi-ness and our people — unified, progressive, dynamic and
fired-up. It also forms the basis of a key strategic plandesigned to deliver the best for our customers, dealers andstaff. This new, powerful brand will streamline our imageand ‘look’and make it easy to identify our top-quality prod-ucts.”
As an additional initiative, and to effectively capture thecompany’s history, the Pegson name will be used on prod-uct descriptions. For example, the XH250 impactor crusherwill now be known as the Powerscreen Pegson XH250impactor crusher.
Earlier this year, Terex Corporation established two newmanufacturing centers of excellence in Northern Ireland,enabling it to more closely serve its customers and capturebenefits of scale as it moved towards leaner, innovativemanufacturing techniques. Screening equipment forPowerscreen is now being made at a center of excellence inDungannon, Ireland, while crushing equipment is manufac-tured at a similar, specially-designed facility in Omagh,Ireland.
For more information, visit www.powerscreen.com.
Terex Pegson, Powerscreen CombineForces Under One Global Brand Name
Morbark Inc. announced an agree-ment with Heat Transfer International(HTI) of Kentwood, Mich. HTI is atechnology company providingturnkey waste-to-energy systemswhich create renewable energythrough SALT gasification of biomass.The agreement, which will createdozens of green jobs in Michigan,includes a manufacturing agreementfor Morbark and an equity investmentin HTI.
Morbark’s investment in HTI is inline with the company’s decades oldvision of sustainable energy throughresponsible forestry.
“Not only will we manufacture thefinest wood reduction equipment, butwe’ll be producing the systems whichconvert wood and other organics intousable electricity and steam,” said LonMorey, president and CEO ofMorbark. “Our agreement with HTIwill allow us to do what we do best —manufacture large custom equipmentsystems with world class quality, andallow HTI to focus on managing therapid growth of its exciting sustainableenergy technology,” added Morey.HTI and Morbark expect final detailsinvolving ReZone Energy tax creditsbefore the end of the year.
“We feel very fortunate to havefound a manufacturing partner thatunderstands our business and sharesour visions,” stated David Prouty, HTIpresident. “Our two companies havesynergies that will allow us both tomove forward more quickly anddirectly. Morbark gives us the manu-facturing systems and capacity to man-age many projects at the same timeallowing us to keep up with the growthwe expect,” continued Prouty.
For more information about HTI,visit www.heatxfer.com.
For more information aboutMorbark, visit www.morbark.com.
RAYCO Manufacturing Inc.’s newest dealer is DitchWitch of East Texas (DWET). DWET has been serving theEast Texas area for more than 37 years. Located in Tyler,Texas, DWET offers sales, service and parts support toRAYCO customers. And due to a fully equipped servicetruck, it is able to reach those customers who are unable toget their equipment to the dealership.
“We are looking forward to bringing the same level ofprofessional service to our RAYCO customers that we havebeen giving our trenching and boring customers over theyears,” commented Bart Young, Ditch Witch of East Texas.
Territory Sales Manager of RAYCO, John Klutarich stat-ed, “Witch of East Texas is just what our East Texas cus-tomers need to make sure they receive top-notch sales and
service that is associated with the RAYCO Brand. We lookforward to a long relationship with them.”
Ditch Witch of East Texas has been in the same locationfor 34 years. It works with its factory service training pro-grams to make sure it is up on all the latest technical infor-mation.
For more information about DWET, call 903/592-6226. RAYCO Manufacturing Inc. is dedicated to the design
and production of environmental equipment. Its currentproduct line includes: stump cutters, cutting tools, log split-ter, forestry mulchers, site preparation machines, brush chip-pers and horizontal grinders.
For more information about RAYCO, visit www.ray-comfg.com.
Morbark Inc., HTI Form New Partnership
RAYCO Appoints DWET as Dealer in Texas
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 7, 2009 • Page 19
2009 Tub Grinder
These Grinders Mean Business
3010T Tub Grinder with Track System
4012FL Tub Grinder 9564 Horizontal Grinder
Power up your productivity with the impressive fleet of grinders from DuraTech. All DuraTech grinders feature enclosedengine compartments with self-cleaning rotary screens on the air intake and HPTO microprocessor-controlled clutches.They are equipped with CAT diesel engines ranging from 325hp to 950hp. DuraTech takes on heavy-duty jobs with thehighest level of efficiency.
Kelly Equipment184 Woodlawn St. • Upland, CA 91786
800-288-7933Fax: 909-920-4558
www.kellyequipment.com
Holland Equipment Company2870 West 2100 South • Salt Lake City, UT 84119
801-972-1601Fax: 801-972-6730www.hollandeq.com
Page 20 • November 7, 2009 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Screening Buckets & Amphibious Excavators
Big Float Amphibious Excavators����������� ��������������������������������������������������������� ����� ������ �����������������
REMU Screening BucketsEven more productive than big trommels!
���������������� ������� ����������� ���������������� ������� ��� ��������������������!�������� �����
���������� ��� ���� �� ��� ��������� ������� �����������
The Nye XCG2 Series contractors grapple, designed pri-marily for demolition work, also tackles crushing/loadinggarbage, wood waste and construction debris.
The XCG2 line features complex internal bridging andgussets, tips made of AR400 with improved geometry forbetter penetration, and tines made from QT100, serrated onthe sides for improved gripping/pulling of material. Stringersextend all the way from the tips to the bridge forming an indi-vidual T1 box section for each tine, and on the back of thetines there is an AR400 wear plate. Main pivot point bush-ings are designed to keep the grapple together when the mainpin is removed.
All Nye pulverizers come standard with an extra heavythree-position bracket and brace. Nye grapples are easy toinstall, require no extrahydraulics and offer simple,safe, almost silent operation.Quick coupler and pin grab-ber models are offered by thecompany.
For more information call905/897-2311 or visitwww.nye.ca/grapple.
Nye’s XCG2 GrappleFeatures ComplexInternal Bridging
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • November 7, 2009 • Page 21
Mobile Crushing and Screening in Action
The unification of the Extec and Fintec brands within the Sandvik group of companies has created the world’s most comprehensive and dynamic line-up of mobile crushing and screening equipment. The Sandvik Mobile Screening and Crushing range now delivers all the familiar characteristics of productivity, versatility and exceptionally low running costs, but they are now combined with levels of durability and aftersales support that are synonymous with the Sandvik name. New name, improved service, same great product.
SANDVIK MOBILE CRUSHERS AND SCREENS 300 TECHNOLOGY CT, SMYRNA GA 30082 USA T: +01 (0) 404 589 3820 F: +01 (0) 404 589 3920 [email protected] www.miningandconstruction.sandvik.com
Page 22 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 23
Page 22 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 23
University of Oregon’s Arena to Be Completed by Fall 2010field superintendent Michael Zollner.
Each of the trucks had to be washed before leaving thesite, due to the city of Eugene’s erosion control regulations.K&E rented an elaborate wheel wash system, but it couldn’tkeep up the pace. The problem was remedied with the mostbasic solution: laborers with hoses washing down tires,“working their tails off,” Zollner said.
The weather complicated matters; at one point it rainedtwo inches over the course of two days. The winter watertable for the site is 13 ft. below ground level and K&E wasworking at 17 ft. below. K&E hired BakerCorp to set up a
pump/filtration system and train K&E workers to use it.Zollner said that for five months, two men were dedicatedsolely to the task of running the filtration system, ensuringthat the water was purified before being sent into the stormdrain.
“By the time the water came out of the filtration system, itwas pretty much drinkable water,” said Zollner.
After excavating the arena area, K&E moved to a relatedproject: an $18-million underground parking garage intend-ed to accommodate Ducks fans. While K&E was at workexcavating the area for the three-level garage, Delta Sandand Gravel hauled nine feet of rock into the arena site as
backfill.Between the arena and the parking garage, K&E prepared
for more than 300 footings, plus an additional 25 as part ofyet another related project: two practice courts of more than16,000 sq. ft.
For the arena footings, K&E used Trimble GPS systems.Over the past two years, the 130-employee excavation com-pany has ramped up its GPS use, adding units to its machinesand dedicating eight workers to operate the systems, full-time.
“Once you learn and understand the system, it’s the wayto go,” said Zollner. “Production goes way up with it.”
At present, K&E has about five employees on the UO job,as it wraps up work for the season by finishing the practicecourts’ footing excavation and backfill. K&E will return towork in the spring; completion for its contract is scheduledfor September/October of next year.
In the meantime, other contractors will continue to workon the arena. The prime concrete contractor, Pence/KellyConcrete of Salem, has nearly finished the structural con-crete. Over the next few weeks, pre-cast stadia slabs will behoisted into place. In December, structural steel, includingroof trusses, will begin to go up.
The financial benefits of such a landmark project in a statewith the fourth highest unemployment rate in the nation areobvious. There are also other, less tangible perks for the con-tractors involved.
Zollner said: “To have a chance to work on a high profilejob like this is a once-in-a-lifetime deal…My grandkids willbe able to come to a Ducks game [at the new arena] andknow that their grandfather helped build it.”
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG
DUCKS from page 16
The Papé ConnectionWith its corporate headquarters based in
Eugene, where the University of Oregon is locat-ed, it’s no surprise that The Papé Group Inc.employs a lot of UO graduates.
Furthermore, former company president andCEO Randy Papé was “a University of Oregonman through and through,” wrote Rick Attig in aNovember 2008 Oregonian article publishedthe week of Papé’s death.
Tim Clevenger, The Papé Group’s vice presi-dent of marketing and brand management,describes Randy Papé as “integrally involved”with the university, pointing out the CEO’s keyrole in a recent capital campaign that helpedraise $600 million for the university.
Like Papé, Clevenger is a UO graduate, aswell as a past president of the university’s alumniassociation. As a Ducks fan and marketing pro-fessional, he’s excited about the new arena: “It’llbe a great venue to get more fans and more cit-izenship, for people from around the state to seeOregon ball.”
Page 24 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Get Back 2 Work with performance-driven
attachments that show up ready to dig,
move, scrape, compact, clean, rake and drill
every day on your highway- and bridge-
related jobs.
Work with the brands that have always
delivered great results. To contact your
local Territory Manager, visit our Web site
and call us today.
Hundreds Of Tough Attachments8 Brands You Can Trust...
E-mail: [email protected]
* Contact your local territory manager for full details
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 25
doosanportablepower.com© 2009 Doosan Infracore International, Inc.
INSISTon Quality
Air Compressor Solutions, Inc.Odessa, TX
432-335-5900
Volvo Construction Equipment & Services - Arlington, TX
817-633-1010
Volvo Construction Equipment & Services - Houston, TX
713-681-9221
Volvo Construction Equipment & Services – San Antonio, TX
830-643-0550
Volvo Construction Equipment & Services – San Leandro, CA
510-357-9131
Volvo Construction Equipment & Services - Sacramento, CA
916-388-2244
Volvo Construction Equipment & Services – San Diego, CA
619-441-3690
Volvo Construction Equipment & Services - Corona, CA
951-277-7620
Volvo Construction Equipment & Services - Seattle, WA
206-763-9300
Volvo Construction Equipment & Services - Spokane, WA
509-533-2465
Page 26 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
1411 N 27th AvenuePhoenix AZ 85009
660022//226699--33222211FFaaxx:: 660022//223333--99337711
TToollll FFrreeee:: 880000//222244--22119900
5061 E EmpireFlagstaff AZ 86004
992288//552266--55999911FFaaxx:: 992288//552266--55779911
TToollll FFrreeee:: 888888//338888--55006611
FFAALLCCOONN PPOOWWEERR
WSDOTMoves Quickly to Control Damages by Landslide in rock and gravel to build up the road. Theyput in culverts to direct the wandering riverunder the temporary gravel road and putrocks and trees alongside it to keep the waterfrom eroding the route.
The Naches River is “still trying to figureout where it wants to go, as far as a newchannel,” said WSDOT spokespersonMeagan McFadden. “That was somethingwe were up against last week: the river con-stantly diverting itself while we’re trying to
build this temporary roadway.”The contractor created a large pool area
near the landslide to help offset the unpre-dictable flow of the river and to make theconstruction of the emergency route possi-ble. Now, to prevent spillage from that pool,
crews are constructing a channel to carry thewater away from the temporary road.
“We’re building a channel that will handlethe velocity of the river and water flow,” saidMcFadden.
Meanwhile, a design team is planninganother roadway, probably also temporarybut intended to last through the winter. Thisroad will be at a higher elevation, above the100-year floodplain, and it will be paved. Itmay or may not remain past spring;McFadden said designers are still determin-ing where the new roads are going to go.
For now, the push is on keeping the emer-gency route from eroding until the higherelevation, interim road is built.
“We have no timeline. We’re just workingas quickly as we can to get things open andfixed temporarily for wintertime. Usuallythe snow comes down the third week ofNovember, so we’re trying to work againstthe clock here,” McFadden said.
The current estimate for the emergencyresponse, channel construction, and buildingthe emergency and winter roads is $7.8 mil-lion, although the numbers are far from firmat this point.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG
LANDSLIDE from page 1
Photo Courtesy/WSDOTThe river continues to pose challenges for crews becauseit has flooded part of the Nile Loop Road. Crews need toelevate the roadway with fill materials and place culvertsto ensure water flows under the temporary road.
Photo Courtesy/WSDOTCrews are working to restore access to the Nile Valley community.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 27
Page 28 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
6715 W RenoOklahoma City OK 73137
800/375-3339405/495-7820
Fax: 405/787-5973Tulsa OK
918/438-1700 800/375-3733Abilene TX
325/692-6334 877/577-5729
Amarillo TX806/373-2826 800/283-1247
Dallas TX214/371-7777 800/753-1247
Ft Worth TX817/378-0600 877/851-9977
Lubbock TX806/745-2112 866/289-6087
POWER MOTIVE CORPORATION5000 Vasquez Blvd.Denver CO 80216
303/355-5900Fax: 303/388-9328
Colorado Springs CO719/576-5541
Grand Junction CO970/241-1550Milliken CO
970/339-4098
716 South 7th StreetPhoenix AZ 85034
602/252-7121Fax: 602/253-9690
Tucson AZ 520/623-8681
Prescott AZ928/778-5621
Albuquerque NM505/345-8383
El Paso TX915/872-1001
Perris CA909/355-3600
Cananea, Sonora, Mexico011-52-6453328300
ROAD MACHINERY LLCKIRBY-SMITH MACHINERY INC.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 29
2975 W. 2100 SouthSalt Lake City, UT
880011//997722--44000000880000//882211--00554488St George, UT443355//667744--00888800
Reno, NV777755//335566--11551111
Elko, NV777755//773388--44444433Las Vegas, NV770022//664422--99000000
Phoenix, AZ660022//223377--33775555
Tucson, AZ552200//229944--77667777
Boise, ID220088//888877--66000000Twin Falls, ID220088//773333--11771155Idaho Falls, ID220088//552233--00882222
VVCCEESS SSaann LLeeaannddrrooSan Leandro, CA
551100//335577--99113311VVCCEESS SSaaccrraammeennttooSacramento, CA 991166//550044--22330000
VVCCEESS SSaann DDiieeggooLakeside, CA
661199//444411--33669900
VVCCEESS CCoorroonnaaCorona, CA
995511//227777--77662200VVCCEESS BBaakkeerrssffiieelldd
Bakersfield, CA666611//338877--66009900VVCCEESS FFrreessnnooFresno, CA
555599//883344--44442200
ARNOLD MACHINERY COMPANY VOLVO CONSTRUCTION EQUIPMENT & SERVICES
Page 30 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
LOADER BACKHOES
www.terex.com
Put TEREX loader backhoes on the job and ROI is a given. Designedto speed cycle times, our highly-productive machines boast 5 degreesmore fill capacity and 13 degrees better discharge over competitiveunits. Ruggedly reliable, they tackle rough terrain with ease, offering19.5 inches of ground clearance versus the competition’s 15 inches.Meanwhile, the widest stabilizer spread and narrowest boom in theindustry keep operators grounded and focused on the job at hand.
For more information on TEREX products, contact:
East Bernard, TX 77435979/335-7528
Rosenberg281/342-5527
El Campo979/543-3301
Bay City979/245-4630
Nome409/253-2244
Tivoli361/286-3571
Hlavinka Equipment Co.hlav inka@hlav inka.com • www.h lav inka.com
A VERSATILEINVESTMENT
TOOLS FOR EARTHMOVING
BEE EQUIPMENT SALES LTD.2506 Slaton HighwayLubbock, TX 79404
806/745-1511Fax: 806/745-1542
SECT IONTrucks & Trailers
Kenworth Receives Green Washington Award for HybridsKenworth Truck Company was honored with the 2009 Green Washington manufacturing
award from Seattle Business magazine during a special awards banquet in Seattle.Kenworth received recognition for its T270 and T370 diesel-electric hybrid trucks, T800
liquefied natural gas (LNG) vehicles, and award-winning efforts by its manufacturing plantin Renton, Wash., to build trucks in an environmentally sustainable manner.
“Kenworth is pleased to receive the Green Washington manufacturing award in recogni-tion of our extensive environmental efforts,” said Bill Kozek, Kenworth general manager andPACCAR vice president. “Kenworth continues to lead the trucking industry by providingpractical technologies that help customers enhance fuel economy and reduce emissions. Wenow have over 500 hybrid and LNG trucks operating in the marketplace.”
Seattle Business magazine’s Second Annual Green WashingtonAwards recognized and honored top companies that have demon-strated their leadership, innovation and commitment to sustainingthe environment through initiatives and actions that contribute toenvironmental sustainability in Washington state.
Earlier this year, Kenworth became the first truck manufacturerto receive the Environmental Protection Agency’s Clean AirExcellence award in recognition of its environmentally friendlyproducts. The EPA also has acknowledged the aerodynamic, fuel-efficient Kenworth T660 and T2000 Class 8 models as EPASmartWay program trucks.
Coca-Cola Enterprises operates 305 Kenworth T370 hybrids in
Christian Papé Promoted at The Papé GroupChristian Papé has been named manager
of corporate development and externalaffairs for The Papé Group Inc. in Eugene,Ore. In his new role, he will work closelywith both the marketing and human resourcedepartments to enhance external relation-ships for the Papé organization with a varietyof constituents, including customers, com-munity leaders, employee team membersand potential members.
“This new position is a reflection of ThePapé Group’s ongoing commitment toexceptional customer service,” said TimClevenger, vice president of marketing andbrand management at The Papé Group. “Weare pleased that Christian will take on thisnew challenge and help us leverage thestrength of our brand in a very competitivemarketplace.”
Most recently, Papé was a territory man-ager at Papé Machinery in Mount Vernon,Wash., a position he held for four years. Hehas more than 10 years of sales and market-ing experience with The Papé Group and
Papé Machinery. Previously, he worked inthe parts and service departments at PapéMachinery in Portland, Ore., and in theaccounting and marketing departments ofThe Papé Group, where he assisted with thesale of company vehicles, various account-ing projects and marketing initiatives for thesales teams. Papé also contributed to thedevelopment of various initiatives within therental division of Papé Machinery.
About The Papé Group Inc. Headquartered in Eugene, Ore., The Papé
Group Inc. is a holding company for capitalequipment dealerships throughout the West.The businesses of The Papé Group sell andservice the premier brands of capital equip-ment used in construction projects, forestry,warehousing/materials handling, truckingand private aviation. Their operations serveseven western states — from Alaska toCalifornia.
• Papé Material Handling Inc. providessales, service and support for Hyster fork-
lifts, lift trucks, and related equipment. • Bobcat West is the dealer for Bobcat’s
line of skid steer loaders, compact excava-tors, track loaders, mini track loaders, all-wheel steer loaders and attachments.
• Ditch Witch Northwest supplies andservices Ditch Witch brand trenchers, vibra-tory plows and horizontal directional drillingequipment.
• Engineered Products, a Papé Company,provides products and services from ware-house design to rack installation to help cus-tomers efficiently manage their inventoryand distribution operations.
• Papé Machinery is the John Deere andHitachi dealer for construction and forestryequipment markets.
• Flightcraft services private and corpo-rate aircraft and provides aircraft chartersfrom FBO locations in Portland and Eugene,Ore.
• Papé Rents maintains extensive rentalfleets including Hyster forklifts, John Deerebackhoes and Genie personnel lifts at its
facilities in Las Vegas and Phoenix, Ariz.,and serves the rental needs of contractors inthese cities.
• Papé Kenworth and Papé TruckLeasing provide sales, service, leasing,rental and support for Kenworth heavy- andmedium-duty trucks.
For more information, visitwww.pape.com.
see KENWORTH page 32
Kenworth receivedrecognition for its T270and T370 diesel-electrichybrid trucks.
Page 32 • November 7, 2009 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Vermeer Colorado South1030 Transit Drive
Colorado Springs, CO 80903719-382-1947
the United States and Canada. King County and DunnLumber in the Seattle area are among customers withKenworth hybrids and Kenworth T370 became the firstmedium duty hybrid truck in New York City’s truck fleetthis past spring.
Kenworth’s goal for its hybrids is to enhance fuel econo-my by up to 30 percent in pickup and delivery applicationsand up to 50 percent in utility and service operations.
Kenworth was the first truck manu-facturer to offer an LNG fuel system asa factory-installed option. Fleets servingthe ports of Los Angeles and LongBeach use Kenworth T800 LNG trucksto help reduce nitrogen oxide (NOx)and greenhouse gas emissions by up toan estimated 33 percent and 20 percent,respectively, compared to a diesel-fueled truck.
The Kenworth manufacturing plantin Renton, Wash., was honored this yearby the King County Industrial WasteProgram with a Commitment-to-Compliance Award for five consecutiveyears of outstanding compliance withthe plant’s industrial wastewater dis-
charge permit. The plant also received a 2009 BestWorkplace for Recycling and Waste Reduction Award fromKing County’s Solid Waste Division. The awards reflect theplant’s comprehensive efforts to reduce, reuse and recycle.The Renton plant also received ISO (International StandardsOrganization) 14001:2004 certification for effective envi-ronmental management systems established to help buildClass 8 trucks in an environmentally sustainable manner.
For more information, visit www.kenworth.com.
Award Recognizes Kenworth’s Goalto Enhance Fuel Economy in Hybrids
The Kenworth manufacturing plant in Renton, Wash., was honored thisyear by the King County Industrial Waste Program with a Commitment-to-Compliance Award for five consecutive years of outstanding compli-ance with the plant’s industrial wastewater discharge permit.
KENWORTH from page 31
Kirby-Smith Machinery and Trail King Trailers have hadan 11-year relationship in the Oklahoma and north Texasarea.
In June, Kirby-Smith Machinery added five new locationsin north and west Texas and will be representing Trail KingTrailers in all its Texas and Oklahoma locations.
With trailers ranging in load capacities from 6,000 to 1million lbs. (2,720 to 450,000 kg), Trail King has trailers toserve a variety of applications for markets as diverse as con-struction, agriculture, transportation, waste and recycling,and specialized hauling.
For more information on Kirby-Smith Machinery, call800/375-3339 or visit www.kirby-smith.com.
For more information on Trail King Trailers, visitwww.trailking.com.
Kirby-Smith AddsTrail King Dealersin Texas, Oklahoma
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 33
HydrauliCircuit Technology Experiences Major GrowthIn 1996, David Perry, CEO of
HydrauliCircuit Technology(HCT) was busy assembling andselling hydraulic kits for attach-ments from his garage.
The company, which specializesin production of easy to installhydraulic kits to operate attach-ments or combination of attach-ments on excavators, loader back-hoes and wheel loaders, wasn’tthere for long, however, as growthcame quickly for the Jonesboro,Ga., company; the following yearPerry moved the operation out ofthe garage and into a 3,000 sq.-ft.-facility and hired staff members.
In 1998 he had to double hissquare footage required to buildhydraulic kits, and then again in1999. In 2009, he expanded yetagain.
This latest expansion puts HCTinto a facility that is almost triplethe size of the previous location —35,000 sq. ft. — and was purpose-ly designed by Perry and built forfurther expansion of his business.
“The previous facility was only13,500 sq. ft. and we were com-pletely full. To accommodate pro-duction, we had to rent additionalspace in adjacent buildings,” Perrysaid.
Situated on a 12.5 acre site locat-ed on a street appropriately namedFluid Drive, in McDonough, Ga.,the new site was chosen to providethe company with plenty of spacefor expansion and loading and off-loading machines. The squarefootage is broken down to 25,000for shop space and 10,000 foroffice.
The new facility provides morespace for design, assembly, ship-ping and storage of hydraulic kits.It also equates to providing HCT
with capabilities it did not havebefore, and is equipped with brandnew machinery, including digitalautomated tube bending equip-ment; semi automatic phased pulseMIG welding; and in-house pow-der coating ovens for components.A new sandblast booth and phos-phate steam degreaser will providecleaned and degreased compo-nents to work on or to powder coat.There are a total of five shop bays,four of which are dedicated baysfor in house hydraulic kit installa-tion and can accommodate virtual-ly any machine the company pro-vides work on.
“With more service bays we areable to accommodate moremachines than ever before. Weoffer local dealers such attractivelabor rates for installing the kitsthat they like to bring the machinesto us. Having a particular modelexcavator or backhoe in our shop is
the best way to obtainengineering informationfor producing hydraulickits on other likemachines. When amachine is in our shop,we’re not only installinga hydraulic kit, we’redoing a comprehensive study onthe machine’s hydraulic and elec-tronic system to develop the tech-nology and engineering for numer-ous kit designs on that model.,”said HCT president, Navin Baliga.
All kits are custom built tomatch the machine and attachmentspecifications.
In looking back at the progres-sion of his business, Perry said,“our original customer base wasend users back in the early days ofthe company. Business thenexpanded more to equipment deal-erships, which quickly became ourlargest customer base. Now, we are
the OEM kit supplier to manyattachment manufacturers. Mostrecently, we have begun to workwith the carrier machine OEM’s.So we’re seeing the OEM as thedirection for future businessexpansion. We think there will beopportunities with this new facilityfor the OEM’s to bring machineshere. Whereas before, thehydraulic kits were shipped outand installed in the field, we can doresearch and development here forthe OEMs.
“We already are working withcompanies such as Komatsu, JohnDeere, CNH Corp. Kobelco,
Doosan, Link-Belt, Volvo, IHI,Kubota and Takeuchi. Right now,we are working with a manufactur-er on engineering, design anddevelopment of wheel loaderhydraulic kits for utilizing roll outbuckets, hydraulic forks and differ-ent attachments where you need athird hydraulic function.”
Recently, HCT plumbed a brandnew John Deere 850D, 85-tonexcavator, at their facility inMcDonough which was transport-ed from the port of Savannah, Ga.
“Having a convenient locationjust off of Interstate 75, theJD850D was dropped off here forthe work and then was transportedon to the end user in Knoxville,Tenn. We anticipate more businessbeing conducted in the same wayin the future. Savannah is a majorentry point for excavators andother machines coming into theU.S. We make it very convenientto drop off a machine at our facili-ty to have the work done beforebeing transported to its final desti-nation,” Perry said.
“Looking back, it seems likethere has been a natural progres-sion of starting with end users, thento equipment dealers, then ontoattachment manufacturers, andnow to the manufacturers of thecarrier machines. It has been a lotof fun, and we are looking forwardto the next phase of growth for ourcompany,” Perry said.
For more information, call888/603-0080 or visit www.hctk-its.com.
(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)CEG
The new 35,000 sq. ft. HydrauliCircuit Technology facilityis located near I-75 at 250 Fluid Drive in McDonough, Ga.
The shop area is twice the size of the entire previousfacility and is equipped with all the newest tooling thatallows for a wider array of services the company canoffer its customers.
(L-R): Getting a jump on the day’s planning in theirnew conference room are key HCT staff members,including Bobby Hudson, national sales manager;Navin Baliga, president; David Perry, CEO; and MikeDavis, sales manager.
With move in com-plete, it’s back tofull production(but on brand newmachines) as DanFields, specialprojects manager,works with thesemi automatictube bendingmachine and BrianMcCormick (inbackground), pro-duction manager,is loading bracketsand tubes in thepowder coatingoven.
Page 34 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
325 OR 330 BL OR CL325 9R 330 MUST HAVE 3306 ENGINE,36" TRACT, JACK HAMMER AND 70 TO80% U/CContact: SAMPhone: 940-655-8462Email: [email protected]––––––––––––––––––––––––––––––––KUBOTA REAR HYDRAULIC OUTLETSI WANT TO CONNECT UP TO 4 QD FORREAR ATTACHMENTS ON MY KUBOTA3750 TRACTOR. I HAVE EXISTING 3-POINT & MY TRACTOR HAS EXISTINGLEVER SLOTS FOR CONTROL. USED ISOK.Contact: TERRYPhone: 206-241-0630Email: [email protected]––––––––––––––––––––––––––––––––CAT DEMOLITION BUCKET USEDContact: RICKPhone: 860-428-0159Email: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE OR HITACHI 160C LCContact: DAVE CAPODICEPhone: 309-275-1927Fax: 309-828-1960Email: [email protected]––––––––––––––––––––––––––––––––LOADERS, GRADERS, EXCAVATORSLOOKING FOR EQUIPMENT TO PUR-CHASE. WE CAN ALSO HELP YOULOCATE EQUIPMENT YOU’RE LOOKINGFOR.Contact: RHONDA SCHEERPhone: 610-544-3399Email: [email protected]––––––––––––––––––––––––––––––––ANY TYPE OF STEELI BUY ANY TYPE OF NEW, USED ORSURPLUS STEEL INCLUDING SHEETPILING, H-PILING, PIPE PILING, WIDEFLANGE BEAMS, PLATES, PIPE, TUBINGETC...Contact: MICHAEL KAYEPhone: 609-882-6983 x 104Fax: 609-882-7458Email: [email protected]––––––––––––––––––––––––––––––––CASE/DAVIS TRENCHER TF900/TF1000DEAD OR ALIVEContact: STEVEN H. MILLERPhone: (260) 341-2140Fax: (260) 724-4165Email: [email protected]––––––––––––––––––––––––––––––––OHIO SCRAP MAGNETContact: MARK VIAPhone: 540-745-3405Fax: 866-905-5488Email: [email protected]––––––––––––––––––––––––––––––––CAT 345B TRACKS/PADSContact: BILL KUKURINEmail: [email protected]––––––––––––––––––––––––––––––––BOBCAT 323 COMPACT EXCAVATORI AM LOOKING FOR A COMPACT EXCA-VATOR SIMILAR TO THE 323.Contact: JASONEmail: [email protected]––––––––––––––––––––––––––––––––
I AM LOOKING TO BUY CONTRACTORD6KLGPContact: JEAN MAURICE BOUTINPhone: 450-346-8975Email: [email protected]––––––––––––––––––––––––––––––––VIBRO HAMMERContact: MIKE DONNESPhone: +61427775849Fax: +61892932261Email: [email protected]––––––––––––––––––––––––––––––––FINAL DRIVEContact: ROBERTO J PALACIOSPhone: 786-287-7056Fax: 305-573-7038Email: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR D11R CRAWLER TRAC-TORSWE NEED ONE POSSIBLY TWO 8ZR OR9TR SERIES PARTS OR CORE REBUILDMACHINES. SU AND SINGLE SHANKPREFERRED. ANY LOCATION WORLDWIDE. IF YOU HAVE A MACHINE MATCH-ING OUR NEEDS PLEASE SENDDETAILS, PHOTOS AND PRICE.Contact: CHARLES SOLOMONEPhone: 719-689-2434Email: [email protected]––––––––––––––––––––––––––––––––CAT D11T | CAT D11T. NEW UP TO 4000HOURS.Contact: PAUL CROLLAPhone: +47-22.207696Email: [email protected]––––––––––––––––––––––––––––––––Wrecked or burnt Morbark Model 13wood chipper for parts.Contact: NormaPhone: 724-887-9375Fax: 724-887-4899Email: [email protected]––––––––––––––––––––––––––––––––VOLVO L120B OR L120C - (1) VOLVOL120B OR L120C, ANY YEAR, ANY CON-DITIONContact: IVAN OCAMPOEmail: [email protected]––––––––––––––––––––––––––––––––KOMATSU D85A21 - 4 X KOMATSUD85A-21. NEW UPTO 3000 HOURS.Contact: PAUL CROLLAPhone: +47-22.207696Email: [email protected]––––––––––––––––––––––––––––––––KUBOTA L39 OR NEW HOLLAND TC40 -WOULD LIKE EITHER A KUBOTA L39OR A NEW HOLLAND TC40AContact: GERRY PAOLINEmail: [email protected]––––––––––––––––––––––––––––––––FRONT LOADER FOR A KUBOTA L5450Contact: CHARLIE LOVEALLPhone: 412-445-1878Email: [email protected]––––––––––––––––––––––––––––––––FELCO ROLLER BUCKETContact: DONALD BEARDPhone: 828-324-6774Fax: 828-324-9632Email: [email protected]––––––––––––––––––––––––––––––––
RAYGO RUSTLER 404 PARTS MACHINEContact: WARREN CARDPhone: 423-332-2223Fax: 423-332-9444Email: [email protected]––––––––––––––––––––––––––––––––CRANE BOOM & BASE FOR BUCYRUSERIE 30B SUPERContact: VINCENT NERIPhone: 860-664-8042Fax: 860-664-9175Email: [email protected]––––––––––––––––––––––––––––––––JD 595D,495 - LOOKING TO BUY JOHNDEERE 595 WHEELED EXCAVATOR OR495 JD ANY YEARContact: IMTIAZPhone: 647-887-4786Fax: 905-497-8633Email: [email protected]––––––––––––––––––––––––––––––––LATE MODEL SOMERO POWER RAKE -NO RETAIL DEALS PLEASE.Contact: TOM NACEYPhone: 651-214-1694Email: [email protected]––––––––––––––––––––––––––––––––BADGER 460Contact: COREYEmail: [email protected]––––––––––––––––––––––––––––––––NEED NOW FROM CONTRACTOR ONLY4 BULLDOZERS 375A 3Contact: JEAN MAURTICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––CAT 330DLContact: RANDY REECEPhone: 770-966-9056Fax: 770-966-9035Email:[email protected]––––––––––––––––––––––––––––––––330BL CAT EXCAVATORContact: ROD MARTIN OR PETERCORCHPhone: 717-733-3593Fax: 717-733-8531Email: [email protected]––––––––––––––––––––––––––––––––VIBRATORY ROLLERS • WANTED 05 ORNEWER 66-84 IN ROLLERS 1000 HRSOR LESSContact: JIMEmail: [email protected]––––––––––––––––––––––––––––––––CAT 140H - CAT 140H GRADER, 17.5X25TYRES, BELOW 3500 HOURS, RIPPERContact: PAUL CROLLAPhone: 47-22.207696Fax: 44-161.226-8525Email: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE WHEELED EXCAVA-TOR595 - JOHN DEERE WHEELEDEXCAVATOR 495,595Contact: IMTIAZPhone: 647-887-4786Fax: 9054978633Email: [email protected]––––––––––––––––––––––––––––––––I AM LOOKING TO BUY 650J NEW LGPContact: JEAN MAURICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––
CAT D8H STARTER - 46A22000 SERIESDIRECT ELECTRIC STARTER.Contact: JOHN NEVINSEmail: [email protected]––––––––––––––––––––––––––––––––2004 CAT BACKHOE 426BContact: DOUG LAUGHLINPhone: 607-742-9017Fax: 607-795-4157Email: [email protected]––––––––––––––––––––––––––––––––BALL JOINT FOR INGERSOLL RANDVR636 - LOOKING FOR USED BALLJOINT FOR INGERSOLL RAND VR636ALL TERRAIN FORK LIFT. PART#59210572.Contact: JOSH KAMMEYERPhone: 269-685-9525Fax: 269-685-5888Email: [email protected]––––––––––––––––––––––––––––––––BRIDGE DECK FINISHERContact: BRIAN SKAJEMPhone: 909 772 1749Fax: 951 352 4301Email: [email protected]––––––––––––––––––––––––––––––––NEED PARTS FOR JCB BACKHOE3C1400B - NEED LOADER CONTROLALSO NEED18.4-24 TIRESContact: KLAUS MUELLERPhone: 239-980-2000Fax: 239-418-1000Email: [email protected]––––––––––––––––––––––––––––––––AUSTIN WESTERN BLADE PACER 300DEAD OR ALIVEContact: LYLE CARPENTERPhone: 701-549-3727Email: [email protected]––––––––––––––––––––––––––––––––REAR RIPPER FOR CAT D5NXLContact: WENDELL CAINPhone: 770-381-8984Fax: 770-381-6977Email: [email protected]––––––––––––––––––––––––––––––––GRADALL 660E CRAWLER | GRADALL660E CRAWLER WITH 5.9 CUMMINSContact: SCOTT RUBRIGHTPhone: 724-468-4700Fax: 724-468-4975Email: [email protected]––––––––––––––––––––––––––––––––KOMATSU D355Contact: RANDY REECEPhone: 770-966-9056Fax: 770-966-9035Email:[email protected]––––––––––––––––––––––––––––––––1976-1979 CAT 12GContact: RANDY REECEPhone: 770-966-9056Fax: 770-966-9035Email:[email protected]––––––––––––––––––––––––––––––––CATERPILLAR CRAWLER DOZERContact: GREG HENDRIXPhone: 936-327-5430Fax: 936-327-5108Email: [email protected]––––––––––––––––––––––––––––––––
LOADER CAT 970FII,966FII,966DVERY GOOD CONDITIONContact: MANSOUR HASEBPhone: +202 26632820Fax: +202 26632820Email: [email protected]––––––––––––––––––––––––––––––––50 TO 75 TON CONVENTIONAL TRUCKCRANEContact: JERRY WADEPhone: 713-248-7971Fax: 281-348-0854Email: [email protected]––––––––––––––––––––––––––––––––TELEHANDLERContact: TONY SPADAPhone: 407-509-4000Fax: 407-850-0256Email: [email protected]––––––––––––––––––––––––––––––––CRAWLER CRANEContact: VINCENTPhone: 860-664-8042Fax: 860-664-9175Email: [email protected]––––––––––––––––––––––––––––––––WHEEL LOADER-JD 624J, QUICK CON-NECT, LOW HRS, PREFER SIDE DUMP.Contact: JOHN NEVINSEmail: [email protected]––––––––––––––––––––––––––––––––WANTED KOMATSU DOZER 155,375Contact: ALHARTHIPhone: 00447875086827Email: [email protected]––––––––––––––––––––––––––––––––1972 96J1729 DS CAT DOZERContact: CHUCK GREENEPhone: 843-669-8481/843-621-4411Email: [email protected]––––––––––––––––––––––––––––––––FLATBED TRAILERContact: JIMMY ELRODPhone: 864 226 9380/ 843 238 8588Email: [email protected]––––––––––––––––––––––––––––––––I AM LOOKING TO BUY PIECE 355KOMATSUContact: JEAN MAURICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––MASSEY FERGUSON 50HX "S SERIES"BACKHOEContact: STONEPhone: 937-313-0321Email: [email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADER 950B,E,F 936EContact: ALHARTHIPhone: 00447875086827Fax: 00441912713032Email: [email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADER 966D,E,F,FIIContact: ALHARTIPhone: 00447875086827Fax: 00441912713032Email: [email protected]––––––––––––––––––––––––––––––––TOPCON HIPER LITE+Contact: MIKE PIEPERPhone: 319-372-2276Fax: 319-372-2277Email: [email protected]––––––––––––––––––––––––––––––––
BRUSH CUTTERContact: RON SHEWPhone: 618-889-2179Fax: 618-993-2441Email: [email protected]––––––––––––––––––––––––––––––––D8N | GOOD RUNNING MACHINE, CAB,SHOT U/C. NJ AREA.Email: [email protected]––––––––––––––––––––––––––––––––IAM LOOKING TO BUY D6D WITH RIPPERContact: JEAN MAURICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––CAT 12G MOTOR GRADER | MACHINESMUST BE 61M SERIAL NUMBER PREFIX- ENCLOSED CAB - WITH SCARIFIER.MACHINES CAN BE LOCATED ANY-WHERE IN THE UNITED STATES ANDMUST BE PRICED UNDER $45,000.00Contact: DAN VANDERMEERPhone: 843-393-8495Fax: 843-393-8382Email: [email protected]––––––––––––––––––––––––––––––––CAT D10 | CATERPILLAR D10N ANDD11N CRAWLER TRACTORS.MACHINES NEED TO HAVE A SINGLE-SHANK RIPPER. ANY YEAR ANY LOCA-TION ACCEPTABLE.Contact: CHARLES SOLOMONEPhone: 702-562-9285Email:[email protected]––––––––––––––––––––––––––––––––CRAWLER CRANE | 1997 TO 2007 100TO 150 TON CRAWLER CRANE; 3DRUMS; 150 BOOMContact: JOHN NEVINSEmail: [email protected]––––––––––––––––––––––––––––––––CAT 12H OR 12N GRADER | MUST HAVEREAR RIPPER AND FRONT PUSHBLOCK, CAB AND AIR, WITH A COUPLETHOUSAND HOURS ON THE MACHINE.PLEASE WHOLESALE ONLY.Contact: RICHARD H. SMITHPhone: 908-479 8383Email: [email protected]––––––––––––––––––––––––––––––––GROVE 1012 CARRY DECK INDUSTRIALCRANEContact: DON AUSTINPhone: 512-750-9742 Fax: 512-301-0163Email: [email protected]––––––––––––––––––––––––––––––––ROAD EQUIPMENTContact: JEAN PASCAL OUEDRAOGOPhone: 0022522443339Fax: 0022522443260Email: [email protected]––––––––––––––––––––––––––––––––VERMEER 252 STUMP GRINDERContact: ERICPhone: 309-351-9520Email: [email protected]––––––––––––––––––––––––––––––––SHUTTLE BUGGYROADTEC SB2500 SHUTTLE BUGGYContact: JOHN NEVINSEmail: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 35
ASPHALT EQUIPMENT
Asphalt Rollers
2005 Cat CB224E, 160 hours
....................................$29,9002004 Cat CB224E, 946 hours
....................................$19,9002002 CB334D, 962 hours
...........................................Call2004 CB334E, 2954 hours
....................................$27,0002004 Cat CB534DXW, 832
hours ..........................$75,0002005 Cat CS563E, 287 hours
....................................$75,0002005 Cat CS563E, 1332 hours
....................................$75,0002005 Cat CS563E, 1,778 hours
....................................$75,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
Asphalt - Misc.
Extreme Service Rotary Wheel Cutter
Ship in 24 hours!
Parts for all competitive units
Call 218-863-6444Attachments Internationalwww.attachmentsintl.com
ATTACHMENTS
Hammers
2003 Cat H160............$55,0002004 Cat H160............$45,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
COMPACTION EQUIP.
Misc. Compaction Equip.
2001 CAT 836, 8923 hours
.....................................$59,0002004 CAT 836G, 7159 hours
...................................$355,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
CRANES
Crane Inspections
Specializing in TruckMounted Cranes
Modern EquipmentSales & Rental800/445-4381
CRAWLER TRACTORS
Crawler Tractor
2006 Cat D4GXL,1049 hours..................$69,0002004 Cat D6RXLII, 4551 hours................$155,0002004 Cat D8RII, 3406 hours................$369,3001998 Cat D8R, 16,600 hours.............$143,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
EXCAVATORS
Hydraulic Excavators
2006 Cat 303.5CCR, 698 hours....................$39,9002003 Cat 325CL, 2,998 hours...............$108,3002003 Cat 325CL, 6,987 hours.................$75,0002005 Cat 330CL, 2,366 hours...............$199,0002006 Cat 345CL ME, 3,809 hours...............$299,0002003 Cat 345BL, 4,941 hours...............$199,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
2004 John Deere 120C, 24’’pads, long arm, 42’’ Werk-Braubucket, excellent condition,1850 hours..................$69,900.1999 Hitachi EX230 LC-5, A/C,long arm, 36’’ HD bucket, verygood condition, 4708hours...........................$69,900.
JDE Equipment Co.616/530-2000
NH Construction EquipmentNew & Used
Parts & Service
Modern EquipmentSales & Rental800-445-4381
Mini Excavators
Yanmar VIO75, s/n 12634, max
digging deoth 15’5’’, max reach
22’11’’, trvel speed 2.9 mph,
bucket, good condition, 358
hours...........................$65,000
405-348-4633
USED BOBCATS!Over 100 to Choose From!
Contact Lance Wheeler214/384-5180
FORKLIFTS
Rough Terrain Forklifts
2007 JCB 930, 6 cyl. 4WD
canopy model with 22’’ clear
view mast, 6,000 lb. lift w/60’’
ITA forks. Mint Condition.
Pictures Available, 600 hours.
....................................$35,000.
Farm-Rite Inc.908/625-0697
2007 JCB 930, 6 cyl. 4WD
canopy model with 22’’ clear
view mast, 6,000 lb. lift w/60’’
ITA forks. Mint Condition.
Pictures Available, 600 hours.
....................................$39,500.
Farm-Rite Inc.908/625-0697
GENERATORS
Generators & Gen Sets
For Sale or RentAll Makes and Models
Modern EquipmentSales & Rental800/445-4381
LANDSCAPE EQUIP.
Misc. Landscape Equip.
Gehl Skid Steer Loaders,Excavators, Track Loaders,
Attachments!
Rent or Purchase
Norris Sales Company610/279-5777
Track Loaders
Backhoe Loaders
2005 Cat 420D, 972 hours
....................................$49,0002006 Cat 420EIT, 773 hours
...................................$65,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
Skid Steer Loaders
EXTRAS FROM DEFENSE DEPT. ORDER
5000# Pallet Forks$700
Landscape Land Planes$1350
Rock Buckets - 66’’$2250
Pick Up at Las Vegas Warehouse
Call 218-863-6444
Used Bobcats!Over 100 to Choose From!
Contact Lance Wheeler
214/384-5180
Wheel Loaders
JCB 426, s/n 1231556, cab, air,
heat, Powershift, smooth ride,
3yd. bucket, excellent condi-
tion, 2750 hours.............CALL
AZ Production Machinery800-637-0821
2006 Cat 904B, 3,456 hours
....................................$39,0002005 928GZ, 2519 hours
....................................$87,3002006 Cat 938GII, 2,552 hours
..................................$119,0002006 Cat 938GII, 441 hours
..................................$129,0002006 Cat 972H, 3,180 hours
..................................$229,0002003 Cat 980G, 7251 hours
..................................$199,0002002 Cat 980G.................Call1998 Cat 980............$499,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
Track Loaders
2006 Cat 953C, 721 hours
..................................$135,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
MISCELLANEOUS
Misc
2008 McCloskey Stacker,36’’x80’ conveyor, 48 hp diesel,
air brakes, lights, ready for
transport, new, 0 hours
...................................$54,500.
Holland Equipment Co.801-972-1601
NEW PARTSHyundai - Mustang
Okada - Sakai
Yanmar
Call:
John Stevens
or Jeff Brooks
G & H Services, Inc.973/383-3370
Fax: 373/383-5756
PARTS
Crane Parts
TEREX PARTS
Modern EquipmentSales & Rental800/445-4381
Undercarriages
NEW UNDERCARRIAGEPARTS
Caterpillar D3, D3B, D3C,D4C, 931...6.125 Pitch
6S8800MT Link Assy., (2), 36
section, dry, master pin, 9/16’’
bolt........................$849.00 Ea.6S605MT Link Assy., (4), 36
section, dry, split master, 9/16’’
bolt........................$874.00 Ea.6S9066MT Link Assy., (4), 36
section, SALT, split master,
9/16’’ bolt ...........$1,099.00 Ea.6Y1339MT Link Assy., (4), 36
section, SALT, split master,
9/16’’ bolt ...........$1,105.00 Ea.
3657/37MT Link Assy., (2), 36
section, dry, master pin, 9/16’’
bolt........................$890.00 Ea.3T6705MT Link Assy., (2), 36
section, SALT, split master,
9/16’’ bolt............$1,150.00 Ea.6S8817MT Track Pads, (77),16’’ single grouser, 9/16’’ bolt.
..................................$9.69 Ea.
Komatsu D30A, D31A, D31B,D37E, D31S, D31P...
6.0126 Pitch
TR1103211292 Track Pad,(118), 14’’ single grouser, 14mm
bolt...........................$7.39. Ea.TR1113000260 Top Roller (2),complete w/shaft....$82.00. Ea.TR1113000281 Bottom Roller(9), double flange..........
.............................$103.00. Ea.
G & H Services, Inc.973/383-3370
973/390-7394 CellFax: 373/383-5756
RENTALS
Rental
Construction & IndustrialEquipment Rentals
Compaction, Excavating,High Lifts, Traffic Control,
Safety, Loaders,Landscaping
Norris Sales Company610/279-5777
Construction & Equpment &Supplies for the“Professionals”
Daily - Weekly - Monthly &Long Term Rentals Available
Stone, Wacker, Honda, Gehl,JLG to name a few .....
Norris Sales Company610/279-5777
Stone, Wacker, MBW,Diamond Products, Honda,
IR, AGL, Sky Trak, JLG,JoBox, DeWalt, Stihl, Imer
Rentals, Sales, Service
Mon-Fri 6:30 am - 5:00 pmSat 7:00 am - 12:30 pm
Norris Sales Company610/279-5777
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200CLASSIFIEDS
Page 36 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SCRAPERS
Motor Scrapers
1998 Cat 627F, 9,740 hours.
..................................$299,0001998 Cat 627F, 10,307 hours
.................................$299,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
TRAINING
Operator Training
Are your operators compliant
with Federal Standards,
OSHA, ANSI, ISO?
MODERN GROUPoffers training for:
- Front-end Loaders &
Backhoes
- Aerial work platforms (AWP)
(Boom & Scissor Lifts)
- Rough Terrain Forklifts
(Gradall, Lull, JCB)
- Skid Steer Loaders
For information, pricing or
reservations:
Call 1-800-223-3827
www.moderngroup.com
All prices include Trainer, travel
and material
NO HIDDEN COSTS
TRUCKS
Bucket Trucks
ELLIOTT BUCKET TRUCKS
Modern EquipmentSales & Rental800/445-4381
Misc Trucks
2001 Cat 730, 9,126 hours
...................................$115,0002004 Cat 735, 4,035 hours
..................................$249,0002005 Cat 735, 3,738 hours
..................................$269,0002006 Cat 740, 3,320 hours
..................................$305,0001994 Cat D350D, 20,412
hours ...........................$49,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
Classified...2 Insertions...95¢ Per WordUse the form below to place a classified ad in the Construction Equipment Guide. Itcould bring the inquiry for which you are looking.
One Word In Each Block
CLASSIFIED RATES: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate theappropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment toConstruction Equipment Guide.CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________
STREET______________________________________________________________________PHONE NO. _________________________________________________
CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________
TOLL FREE 1-800/523-2200FAX 215/885-2910
470 Maryland Drive • Fort Washington, PA 19034Email: [email protected]
HEADING (Category to place listing):
Check Enclosed VISA MASTERCARD AMERICAN EXPRESS
CARD NUMBER EXP. DATE
SIGNATURE OF AUTHORIZED CARDHOLDER
What’s going on in
YOUR COMPANY
We want to know!
Give us a call.
ConstructionEquipment
Guide
(800)523-2200
OR
FAX:(215)
885-2910
The Easy Way To Advertise YourEquipment Valued At Less Than $1 MillionRun In Two Consecutive Issues For $95
NNeexxtt IIssssuueeCClloosseess
NNoovveemmbbeerr 1133tthhDid this ad catch your attention? Color can work for you.
Call Construction Equipment Guide800/523-2200
2009 IROCK Crusher RDS-15 Closed CircuitCrushing and Screening Plant.
For more information call Sean Donaghy at 330/931-959523-24 EB
The 2009 EZ Screen 1200XL, with a 5'x6' screen box,and a patented non-hydraulic screen drive. The EZ1200XL works with a 1/2 to 2 yard loader. Now with a20 Horsepower Deutz Diesel Engine....................................................................................$39,500 plus freight
Other Screens Availablewww.ez-screen.com • 866/745-5828 23-24 EB
HHeerree '' ss hhooww tthhee BBAARRGGAAIINN AADDSS WWoorrkk::• Supply us with a photo of a machine (Only one machine per Bargain Ad)
and a maximum 17 word description plus contact and phone number.• Send Check for $95 with copy to:
Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.• The ad will run for two consecutive issues.
Fo r m o r e i n f o r m a t i o n , c a l l C o n s t r u c t i o n E q u i p m e n t G u i d e t o d a y a t
8 0 0 / 5 2 3 - 2 2 0 0
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 37
Cat IT38G Tool Carrier Nets $44K at WCA’s Auction in Perris
Brad Steiner (L) and Collin Fleming, both of EarthRental, look for deals at WCA’s sale.
Brian Shajem (L) and ChrisJohnson, both of WesternStructures, discuss bids.
Equipment buyers survey WCA’slot.
Bidders vie for bargains at WCA’s site in Perris, Calif.
Linda Cook, director of operations,WCA, joins Dan Pawlowski.
Western Construction Auction (WCA) held an auctionin Perris, Calif., at the company’s Los Angeles facil-ity Oct. 3. The facility is located on 2021 Goetz Road
in Perris.More than 800 bidders came from all over the world includ-
ing attendees from the Middle East, Canada, Mexico, Jamaica,Alaska and Hawaii.
Highlights from the auction featured a 2004 Cat 420D soldfor $31,000, a 2002 Pete 378 Heavy Haul and a 2001 MurrayLowbed sold as a set for $87,000 and a 2003 Cat IT38G inte-grated tool carrier sold for $44,000.
WCA’s upcoming auctions at the Los Angeles site includesDec. 5 and Feb.13, 2010.
For more information, visit www.westernconstructionauc-tions.com. Western Construction Auction (WCA) held an auc-tion in Perris, Calif., at the company’s Los Angeles facility Oct.3. The facility is located on 2021 Goetz Road in Perris.
More than 800 bidders came from all over the world includ-ing attendees from the Middle East, Canada, Mexico, Jamaica,Alaska and Hawaii.
Highlights from the auction featured a 2004 Cat 420D soldfor $31,000, a 2002 Pete 378 Heavy Haul and a 2001 MurrayLowbed sold as a set for $87,000 and a 2003 Cat IT38G inte-grated tool carrier sold for $44,000.
WCA’s upcoming auctions at the Los Angeles site includesDec. 5 and Feb.13, 2010.
For more information, visit www.westernconstructionauc-tions.com.
Page 38 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERSBridgeport, NYPhone: 315-633-2944
• Springdale, ARFri., November 13, 2009For: Very Late Model AggregateConstruction Equipment Auction
• Wilmington, DESat., November 14, 2009For: Construction Equipment,Aerial Lifts, Support EquipmentHammers, Saws & More…
• Houston, TXTues., November 17, 2009For: Late Model Construction,Earthmoving Equipment,Aerials, Forklifts, Support,Truck & Trailers
• Manassas, VAFri., November 20, 2009For: Job Completion Auction ofCat, John Deere, EarthmovingEquipment & Rental Returns ofLate Model Equipment
• Providence, RISat.-Sun., November 21-22,2009For: Complete Liquidation ofone of the Largest PrivatelyOwned Rental Companies inNew England!
• Dallas, TXTues., December 1, 2009For: Late Model ConstructionEquipment, Support Equipment,Aerials, Trucks & Trailers
• South Plainfield, NJFri., December 4, 2009For: Property is SOLD!Complete Liquidation ofConstruction, SupportEquipment, Trucks & Trailers
• Queretaro, MexicoFri., December 4, 2009For: Large ConstructionEquipment Auction, SupportEquipment, Trucks & Trailers
• Columbus, OHSat., December 5, 2009For: Construction, Forklifts,Aerial Lifts, Truck & TrailerAuction
• Kissimmee, FLThurs., December 10, 2009For: Late Model Rental Returnsof Construction, SupportEquipment, Aerial Lifts,Telescopic Forklifts
• Atlanta, GAFri., December 11, 2009For: Late Model RentalsConsisting of Construction,Support Equipment, Trailers,Trucks, Aerial Lifts & Forklifts
• Ledyard (Foxwood Casino), CTSat., December 12, 2009For: Late Model Rental FleetConstruction, SupportEquipment, Aerial Lifts, Trucks& Trailers
• St. Louis, MOThurs., December 17, 2009For: Rental Fleet Equipment –Large and Small, Trucks &Trailers
• Atlantic City, NJSat., December 19, 2009For: Late Rental Return Auctionof Late Model Construction,Aerials, Forklifts, Trucks,Trailers & Support Equipment
• Cincinnati, OHTues., December 29, 2009For: Construction, SupportEquipment, Aerial Lifts, Trucks& Trailers
• Greenwich (Albany), NYWed., December 30, 2009For: Late Model Kobelco, NewHolland, Cat, John DeereEarthmoving Equipment,Forklifts, Aerial, SupportEquipment
• Kissimmee, FLSunday thru Saturday., February 1-8, 2010For: Annual 8 Day Sale of theLatest & Greatest Construction,Aerials, Forklifts, Cranes, TruckTractors, Dump Trucks and AllTypes of Trailers and SupportEquipment – THE REAL SALE!
• Portland, ORDTBAFor: Rental Fleet Construction,Aerial, Telescopic Equipment,Trucks & Trailers
• Newark, NJDTBAFor: Rental Fleet Construction,Aerial, Telescopic Equipment,Trucks & Trailers
RITCHIE BROS. AUCTIONEERSRichmond, BC, CanadaPhone: 402-421-2631
• Detroit, MINovember 10
• Hartford, CTNovember 11
• Osceola, WINovember 12
• Atlanta, GANovember 12
• Salt Lake City, UTNovember 13
• Krakow, PolandNovember 17
• Truro, NS, CANNovember 17
• Houston, TXNovember 17 - 19
• Meppen, GermanyNovember 19
• Manassas, VANovember 19
• Moncofa, SpainNovember 19 & 20
• Phoenix, AZNovember 19 & 20
• Istanbul, TurkeyNovember 21
• Brisbane, AustraliaNovember 24
• Grande Prairie, AB, CANNovember 24 & 25
• Moerdijk, The NetherlandsNovember 25-27
• Geelong, AustraliaNovember 26
• Vancouver, BC, CADecember 1
• Sacramento, CADecember 1 & 2
• St., Aubin Sur Gaillon, FranceDecember 1 & 2
• Saskatoon, SK, CANDecember 2
• Fort Worth, TXDecember 2-4
• Montreal, QC, CANDecember 3 & 4
• Polotitlan, MexicoDecember 8
• Caorso, ItalyDecember 3 & 4
• Toronto, ON, CANDecember 7 & 8
• Polotitlan, MexicoDecember 8
• Statesville, NCDecember 8
• Denver, CODecember 8 & 9
• Columbus, OHDecember 9
• Chicago, ILDecember 10 & 11
• Olympia, WADecember 10 & 11
• Farmington, NMDecember 14
• Dubai, United Arab EmiratesDecember 14 - 16
•Pittsburgh, PADecember 14
• Nashville, TNDecember 15
• Minneapolis, MNDecember 15
• Los Angeles, CADecember 15 & 16
•Kansas City, MODecember 16
• North East, MDDecember 16 & 17
• Prince George, BC, CANDecember 17
• St. Louis, MODecember 18
• Narita, JapanJan 27, 2010
• Las Vegas, NVFeb 5, 2010
• Orlando, FLFebruary 15-20, 2010
• Torreon, MexicoFebruary 2010
CAT AUCTION SERVICESShakopee, MNPhone: 866-750-9432
• Harris, MNWed., November 18, 2009For: Complete Dispersal ofArcon Construction
• Columbus, MNThurs., November 18, 2009For: Nadeau Excavating &Others
DEANCO AUCTIONPhiladelphia, MSPhone: 877-898-5905
• Philadelphia, MSWed., & Thurs., Nov. 18-19,2009For: Huge 2 Day Public AuctionSelling Construction Equipment,Trucks, Trailers, LoggingEquipment, Support Equipment
GLOBAL FORCE AUCTION GROUPThurmont, MDPhone: 301-631-0650
• Martinsburg, WVSat., December 19, 2009For: Construction Equipment
HUNYADY AUCTION COMPANYHatfield, PAPhone: 215-361-9099
• Souderton, PAWed., November 18, 2009For: Complete Liquidation ofScholl Bros. Excavating, Inc.
IRAY AUCTIONSFoley, MNPhone: 320-968-7230
• Foley, MNFri., Dec. 4, 2009For: Heavy ConstructionEquipment And Semi, Truck &Trailer
IRON PLANET AUCTIONSPleasanton, CAPhone: 888-433-5426ONLINE AUCTIONSGo to www.ironplanet.com toview the complete auctionschedules, inspection reportsand to place your bid!
• Thurs., November 12, 2009For: Construction Equipment
• Thurs., November 19, 2009For: Construction Equipment
KISSIMMEE AUCTION COMPANYSpartanburg, SCPhone: 864-583-2700
• Spartanburg, SCThursday, December 3, 2009For: Construction and ForestryEquipment
L & L EQUIIPMENT SALESFairview, TNPhone: 615-799-0850ONLINE AUCTIONGo to www.landlequip-mentsales.comto view the complete auction
schedules, inspection reportsand to place your bid!
• Sat., December 5, 2009For: Construction Equipment
LOWDER AUCTIONEERSWilmington, NCPhone: 800-348-8956
• Durham, NCWed., December 3, 2009For: Delaware Contractors &Truck Auction
MARTIN & MARTIN AUCTIONEERS, INC.Pelzer, SCPhone: 864-947-7888
• Wallace, SCTuesday, November 17, 2009For: Construction Equipment,Truck, Trailers & Tools
• Pelzer, SCWed.-Thurs, December 9-10,2009For: Annual 2 Day WinterContractors Auction
NITKE AUCTIONSWausau, WIPhone: 715-362-6162
• Wausau, WISat., Dec. 12, 2009For: Construction Equipment,Trucks & Trailers
PETROWSKY AUCTIONEERS INC.North Franklin, CTPhone: 860-642-4200
• North Franklin, CTFri. & Sat., November 13-14,2009 For: Construction, Earthmovingand Paving Equipment, Trucks& Trailers
RITCHASON AUCTIONEERSLebanon, TNPhone: 800-806-3395
• Louisville, KYSat., November 21, 2009For: TBA
• Lebanon, TNSat., December 12, 2009For: TBA
STOCK AUCTION COMPANYSt. Edward, NEPhone: 800-937-3558
BIG IRON TIMED
INTERNET ONLY AUCTIONGo to www.stockra.com to viewthe complete auction sched-ules, inspection reports and toplace your bid!
• Wed., November 11, 2009For: Construction Equipment
• Wed., November 25, 2009For: Construction Equipment
THE AUCTIONEERS GROUPPerth Amboy, NJPhone: 732-776-7222
• Perth Amboy, NJThurs., November 17, 2009For: Construction Equipment,Trucks & Trailers, Forklifts &More!
UTILITY AUCTIONSWilmington, DEPhone: 800-710-4361
• Wilmington, DEFri., December 18, 2009For: Construction, Utility &Forestry Equipment
WESTERN CONSTRUCTIONAUCTIONS INCPerris, CAPhone: 866-731-7760
• Perris, CA Sat., Dec. 5, 2009 – 8AMLive Online Biddingwww.wca-online.com
WOLFE INDUSTRIAL AUCTIONSFrederick, MDPhone: 301-898-0340
• Frederick, MDSat., December 11, 2009For: Southern Mid-AtlanticContractors Auction
WORLD WIDE AUCTIONEERSEl Paso, TXPhone: 480-505-0070
• El Paso, TXTues., November 24, 2009For: Construction Equipment
YODER & FREY AUCTIONEERS, INC.Holland, OHPhone: 419-865-3990
• Bow, NHThurs., November 12, 2009For: 8th Annual Fall Auction
• Lorain, OHThurs., November 19, 2009For: Rowland Trucking Inc.
• Kissimmee, FLFeb 8 –Feb. 16, 2010 36th Annual Kissimmee, FLAuction
AuctionsComing
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 39
Auctions you can trust
Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.
Go to www.ironplanet.com to view the complete auction schedule, guaranteed inspection reports, and place your bids.
Complete Liquidation. www.ironplanet.com
Thursday, November 19
2008 ROTOCHOPPERGOBAGGER 250HD 2004 MACK FRONT LOADER 2000 FORD F350
2008 GEHL 640
2000 BANDIT BEAST 3680
1994 MACK ROLL OFF CASE 621D6 YARD FRONT LOADTRASH CONTAINERS
1999 MACK FRONT LOADER 1998 FLAT BED 4700 18’
Featuring equipment from
Page 40 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Fasil Ashine of Fasil Building Contractors traveled allthe way from Ethiopia to get a chance at bidding onthe 320CL excavators.
Tommy Fernandez of Louisiana Machinery in Reserve,La., checks out the bid list.
Michael Young of Zachry Construction Corporation inSan Antonio, Texas, gets ready to try out a 416 D back-hoe.
Rusty Krueger (L) of Brazoria Collision and his friendKenneth Lassiter, independent property owner, both ofBrazoria, Texas, intend to bid on a 416D with a box-blade.
Rick Greene (L) and Lee Caldwell of Darwood GreeneConstruction in Houston take a close look at this 320CL excavator.
Eddie Bradshaw, owner of Bradshaw Nursery in Alvin,Texas, admires this TH210 low profile loader he justbought to handle his palm trees.
Steve Wagner, Wagner Materials & Construction inSpring Branch, Texas, tries his hand with a 302.5Cmini-excavator.
Frank Thielen (L), Orion Construction in Houston,gives this 320 CL the once over with Gary McGaughy ofRockway Services, also in Houston.
The turnout was very good despite torrential rains.
Cat Auction Services held a sale at its Houston facilityin Baytown, Texas, Oct. 22.
With more than 120 pieces of late model Cat equipment— including a variety of excavators, loaders, graders andtrack-type tractors — the Houston event drew bidders fromacross the United States and around the world. More than100 pieces qualified for a Caterpillar Extended ProtectionPlan.
Additionally, buyers were invited to view the entire equip-ment list online prior to the event.
Cat Auction Services President Rick Albin said, “We’reexcited to be back in Houston, and about displaying theequipment at our new permanent venue at Houston RacewayPark. We are committed to holding high-caliber auctions thatbring value to our buyers and sellers, and to giving our cus-tomers an auction experience unlike any other. Our inspec-tion reports and protection plan options, and the wide rangeof Caterpillar services we can provide, give us a leg up onproviding good, quality used iron to buyers.”
Cat Auction Services entered the heavy-equipment auc-tion arena in late 2008, and has hosted events in Des Moines,Iowa; Elko, Minn.; Houston, Texas; Grand Junction, Colo;and Omaha, Neb. Reviews from all corners have been posi-tive, and the auctions have drawn buyers from 48 states and26 countries.
By conducting auctions that provide value to both the buy-ers and sellers, Cat Auction Services complements andenhances the relationship between Cat dealers and their cus-tomers. Cat Auction Services was formed through a uniquepartnership of Cat dealers with the endorsement ofCaterpillar Inc. The addition of Cat Auction Services to theportfolio of services available to Cat customers and others inthe heavy-equipment industry enhances and builds upon thecompany’s existing customer loyalty.
The equipment list featured surplus equipment fromMustang Cat, Louisiana Machinery and Cat UsedEquipment Services Inc. This was an unreserved public auc-tion.
For more information, visit www.catauctions.com.
Cat Auction Services…Late Model Cat Iron Up for Grabs in Texas
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 41
INTERNET BIDDING w/ LIVE AUDIO available!
: NOVEMBER 7, 2009
DUBAI, U.A.E. : DECEMBER 20-22, 2009BEIRUT, LEBANON : NOVEMBER 12, 2009DUBAI, U.A.E. (Car and Light Truck Auction) : NOVEMBER 12, 2009DAU, PHILIPPINESOTHER UPCOMING AUCTIONS:
EEEELLLLL PPPPPPAAAAAAASSSSSSOOOOOO ����� TTTTTTTEEEEEEXXXXXXXAAAAAAASSSSSSSSSSS ����� RRRRRRRRRRRREEEEEEEEEEGGGGGGGGGGGGGIIIIIIIIIIIISSSSSSSSSSSSSTTTTTTTTTTTTTTTTRRRRRRRRRRRRRRAAAAAAAAAAAAAAAAAAAAATTTTTTTTTTTTTTTTIIIIIIIIIIIIOOOOOOOOOOONN 9999999999AAAAAAAAAAAAAMMMMMMMMMMMMMM ��� AAAAAAAAAAAAAUUUUUUUCCCCTTTTTTTTTTTTTTTIIIIIIIIIIIIIOOOOOOOOOOOOONNNNNNNNNNNNNNNN SSSSSSSSSSSTTTTTTTTTTTTTTTAAAAAAAAAAAAAAAAAARRRRRRRRRRRRRRRRTTTTTTTTTTTTTTSSSSSSSSSSSSSSS 111111111111111111111111111111111AAAAAAAAAAAAAAAAAAMMMMMMMMMMMMMMMMU N R E S E R V E D A U C T I O NEL PASO � TEXAS � REGISTRATION 9AM � AUCTION STARTS 11AM
24TH NOVEMBER 2009
CRAWLER TRACTORS � WHEEL LOADERS � HYDRAUL IC EXCAVATORS � MOBILE EXCAVATORS �
MOTORGRADERS � FORKL I FTS � MANL IFTS � TELESCOP IC HANDLERS � GENERATOR SETS �
TRUCK TRACTORS � DUMP TRUCKS � TANKER TRUCKS � CARGO TRUCKS � TRA ILERS � TRUCKS
� DOUBLE DRUM ROLLERS � COMBINAT ION ROLLERS � PNEUMAT IC T IRE ROLLERS � WALK
BEH IND ROLLERS � V IBRATORY ROLLERS � A IR COMPRESSORS � WELDERS � ROUGH TERRA IN
CRANES � CRAWLER CRANES � LOADER BACKHOES � INTEGRATED TOOL CARR IERS � ASPHALT
PROF I LERS � AGR ICULTURAL TRACTORS � ATTACHMENTS � BUSES � CARS, P ICKUP TRUCKS ,
VANS , JEEPS � P lus Much More . . .M
ark Jason Dr
Oleary DrTO EL PASOINTL AIRPORT
TANGERINE AVE
MARVIN LN
Eastwind Dr
Century Dr
Snoqualine Dr
Acacia Dr
Oshea St
Goldmine
MARINA AVE
MONTANA AVE
MONTANA AVE
TO DELL CITY
62
180
El Paso, Texas
WWAAuction Site
WWAAuction Site
i ronauct ions.com � in fo@ironauct ions.comTEL +1 480 5050070 � FAX +1 480 5050071
AUCTION YARD: 15101 Montana Avenue, El Paso, Texas 79907 USA
Page 42 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2– CAT 621F 2006 KOLBERG PIONEER FT2650
1 OF 3– CAT 950G
28 — WHEELLOADERS
2007 CAT 320D
13 — HYDRAULICEXCAVATORS
1 OF 4– CAT 140H VHP
For equipment listings & photos, visit our web site
rbauction.com/arizona
Friday, November 20, 2009 7:00 amAuction Site: 5410 West Lower Buckeye Rd, Phoenix, AZ 85043-8909
Fax: 602.269.5674
Upcoming UnreservedPublic Auctions28
* NOTE: NEW DATE – Dates are subject to change
Can't make it to the auction? Place your bids over the Internet at rbauction.com. Submit proxy bids in advance of any auction, or place real-time bids through our live auction broadcasts. Click rbauctionBid on the Ritchie Bros. web site for details.
UNRESERVED PUBLIC AUCTION
PhoenixArizona
Auction Update
DETROIT, MI, USA 734.587.3200 NOV 10HARTFORD, CT, USA 860.684.1055 NOV 11OSCEOLA, WI, USA 507.774.5050 NOV 12ATLANTA, GA, USA 770.304.3355 * NOV 12SALT LAKE CITY, UT, USA 435.843.4260 NOV 13KRAKOW, POLAND +31.168.392.200 NOV 17HOUSTON, TX, USA 713.455.5200 NOV 17 - 19MEPPEN, GERMANY +49.54.198.1330 NOV 19MANASSAS, VA, USA 571.248.6221 NOV 19MONCOFA, SPAIN +34.964.580.559 NOV 19 & 20PHOENIX, AZ, USA 602.269.5631 NOV 20ISTANBUL, TURKEY +90.216.366.0300 NOV 21BRISBANE, AUSTRALIA +61.7.3382.4444 NOV 24GRANDE PRAIRIE, AB, CAN 780.538.1100 * NOV 24 & 25MOERDIJK, THE NETHERLANDS +31.168.392200 NOV 25 - 27GEELONG, AUSTRALIA +61.3.5245.3333 NOV 26VANCOUVER, BC, CAN 604.580.0166 DEC 1TRURO, NS, CAN 902.895.3700 DEC 1SACRAMENTO, CA, USA 530.724.3900 DEC 1 & 2ST. AUBIN SUR GAILLON, FRANCE +33.2.32778610 * DEC 1 & 2SASKATOON, SK CAN 306.933.9333 DEC 2FORT WORTH, TX, USA 817.237.6544 DEC 2 - 4MONTREAL, QC, CAN 450.464.2888 DEC 3 & 4CAORSO, ITALY +39.0523.818801 * DEC 3 & 4TORONTO, ON, CAN 800.357.0659 * DEC 7 & 8POLOTITLAN, MEXICO +52.427.266.0909 DEC 8STATESVILLE, NC, USA 704.873.6633 DEC 8 DENVER, CO, USA 970.535.6700 DEC 8 & 9
Call for more information 602.269.5631
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 7, 2009 • Page 43
ADVERTISER INDEX
TThhee AAddvveerrttiisseerrss IInnddeexx iiss pprriinntteedd aass aa ffrreeee eeddiittoorriiaall sseerrvviiccee ttoo oouurr aaddvveerrttiisseerrss aanndd rreeaaddeerrsshhiipp.. CCoonnssttrruuccttiioonn EEqquuiippmmeenntt GGuuiiddee iiss nnoott rreessppoonnssiibbllee ffoorr eerrrroorrss oorr oommiissssiioonnss..
ALLU GROUP..........................................................................8
AMULET MFG CO INC .........................................................14
BARGAINS.............................................................................36
CHAMPION MOTOR GRADERS............................................8
CLASSIFIEDS...................................................................35,36
CONSTRUCTION EQUIPMENT GUIDE
CEG WANTED...............................................................34
CONSTRUCTIONEQUIPMENTGUIDE.COM...............15
DITCH WITCH WEST..............................................................5
DOM-EX.................................................................................44
DOOSAN PORTABLE POWER ............................................25
DURATECH ...........................................................................19
DYNAPAC ..............................................................................30
FCC EQUIPMENT FINANCIAL...............................................7
FELLING TRAILERS .............................................................32
HENDRIX MACHINERY LLC ..................................................3
HULLS 151 IMPLEMENT INC...............................................16
HYDRAULICIRCUIT TECHNOLOGY....................................11
IROCK CRUSHERS ..............................................................20
IRON PLANET.......................................................................39
JOE MCELREATH CO INC.....................................................9
KAWASAKI CONSTRUCTION MACHINERY.......................26
KOMATSU AMERICA CORP ................................................28
LBX .......................................................................................22
LIEBHERR - AMERICA INC..................................................10
NPK CONSTRUCTION EQUIPMENT INC...........................27
PALADIN HEAVY CONSTRUCTION ....................................24
PURPLE WAVE INC..............................................................37
REMU SCREENING TECHNOLOGY...................................20
RITCHIE BROS. AUCTIONEERS
PHOENIX AZ / AUC UPDATE......................................42
RSC EQUIPMENT RENTAL..................................................13
SANDVIK MINING & CONSTRUCTION...............................21
TEREX LOADER BACKHOES..............................................30
TOPCON POSITIONING SYSTEMS....................................13
VOLVO CONST EQUIP & SVCS....................................2,6,29
WORLDWIDE AUCTIONEERS
EL PASO TX ..................................................................41
WORLDWIDE RENTAL SERVICES .....................................14
Page 44 • November 7, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CRAWLER DOZERS22000044 CCaatt DD1100RR IIII EROPS, A/C, Choice of Blades, Winch, Good U/C, Very Clean DirtMachine, Very Good Condition, Service History ............................................$$119922,,55000011999999 CCaatt DD1100RR EROPS, A/C, U/Tilt Dozer, 4 Brrl M/S Ripper, Excellent U/C, VeryGood Condition ..............................................................................................$$227722,,55000011999988 CCaatt DD1100RR EROPS, A/C, U/Tilt Dozer, New U/C, Very Good Condition, ServiceHistory ............................................................................................................$$225522,,55000022000066 CCaatt DD1100TT 3250 Total Hours, EROPS, SU/Tilt Dozer, 4 Brrl M/S Ripper, ExcellentU/C, Excellent Condition ................................................................................$$776699,,55000022000066 CCaatt DD1100TT 3251 Total Hours, A/C, SU/Twin Tilt Dozer, 4 Brrl M/S Ripper,Excellent U/C, Excellent Condition ..................................................................$$776699,,55000022000022 CCAATT DD99RR 9,789 Total Hours, EROPS, A/C, Diff Steer, SU/Tilt, M/S Ripper,Excellent U/C, Very Good Condition................................................................$$335599,,55000022000022 CCaatt DD99RR EROPS, A/C, U/Tilt Dozer, Winch, Poor U/C, Very Clean Dirt Machine,Good Condition, Service History ....................................................................$$115544,,55000022000033 CCaatt DD88RR IIII 6285 Total Hours, EROPS, A/C, SU/Tilt Dozer, 4 Brrl S/S Ripper, VeryGood U/C, Excellent Condition........................................................................$$225599,,55000022000000 CCaatt DD88RR OROPS, SU/Tilt Dozer, 4 Brrl S/S Ripper, Excellent U/C, Very GoodCondition ........................................................................................................$$115599,,55000011999966 CCaatt DD88RR EROPS, A/C, SU/Tilt Dozer, M/S Riper, Good U/C, Good Cond.....................................................................................................................................$$114455,,000000
((22)) 22000066 CCaatt DD66NN XXLL 1736 Hrs, EROPS, A/C, Sweeps, PAT Blade, System One U/C,Excellent Condition ................................................................................ffrroomm $$113399,,55000022000044 CCaatt DD66RR XXLL IIII 8002 Total Hours, EROPS, A/C, SU/Tilt Dozer, M/S Ripper,Sweeps, Good U/C, Very Good Condition ......................................................$$110099,,55000022000044 CCaatt DD66RR XXLL IIII 5987 Total Hours, EROPS, A/C, SU/Tilt Dozer, M/S Ripper,Sweeps, Very Good U/C, Very Good Condition ..............................................$$110099,,55000022000055 CCaatt DD66RR XXLL IIII 5121 Total Hours, EROPS, A/C, SU/Tilt, Diff Steer, EngineEnclosures, Sweeps, M/S Ripper, Good U/C, Excellent Condition ..................$$111199,,55000011999988 CCaatt DD66RR LLGGPP OROPS, Sweeps, S/Tilt Dozer, New U/C ............................$$7799,,550000
CRAWLER LOADERS11999999 CCaatt 995533CC EROPS, A/C, G/P Bkt, Excellent U/C, Very Good Condition......$$4422,,55000011999944 CCaatt 995533BB EROPS, G/P Bkt, Poor U/C, Good Condition............................$$2244,,55000022000044 CCaatt 996633CC EROPS, A/C, G/P Bkt w/Teeth, Good U/C, Very Good Cond.....$$7799,,550000
LOADER BACKHOES22000055 CCaatt 442200DD OROPS, G/P Bkt w/BOCE, 24" B/H Bkt w/Teeth,Good Tires, Very GoodCondition ..........................................................................................................$$2299,,550000
WATER EQUIPMENT11998888 CCaatt 662211EE EROPS, A/C, Retarder, Auto Lube Sys, 8,000 Gal Mega Tank, 4 RearSpray Heads, Water Cannon ..........................................................................$$110099,,550000((22)) 11998877//8888 CCaatt 776699CC EROPS, A/C, Retarder, Supp Steering, MEGA 9,000 Gal Tank, 4Rear & 2 Side Heads, Remote Cannon, Hose Reel, Good Tires, Very Good Condition ................................................................................................................ffrroomm $$114499,,550000
EXCAVATORS / SHOVELS22000000 CCaatt 336655BBLL A/C, Reach Boom, 11'10" Stick, 82" GP Bkt w/Teeth, Very Good U/C......................................................................................................................$$114499,,550000
22000011 CCaatt 334455BBLLIIII A/C, Reach Boom, 15'9" Stick, Aux Hydraulics, 65" Bkt w/Teeth,Very Good U/C, Good Condition, Service History ..........................................$$110099,,55000022000011 CCaatt 332200CCLL A/C, Pin Grabber Linkage, 31-1/2” TBG Pads, V. Good U/C ..$$5522,,55000022000044 HHiittaacchhii ZZXX333300LLCC A/C, 84" Stick, 3.3 cy G/P Bkt w/Teeth, 31.5" TBG Pads, VeryGood U/C, Very Good Condition ......................................................................$$7799,,55000011999999 HHiittaacchhii EEXX11110000--33 A/C, 29'10" Boom, 11' Stick, G/P Bkt w/Teeth..........$$339999,,55000022000044 JJoohhnn DDeeeerree 333300CCLLCC A/C, 10'6" Stick, Pin Grabber Linkage, G/P Bkt, Good U/C,Very Good Condition ........................................................................................$$8899,,55000022000055 KKoommaattssuu PPCC330000LLCC--77 A/C, 10'5" Stick, 54" Bkt w/Teeth, 31-1/2" TBG Pads, VeryGood U/C, Excellent Condition..........................................................................$$9999,,550000
WHEEL LOADERS11999999 CCaatt 998888FF IIII 15,182 Hours, EROPS, A/C, 35/65x33 Tires. Very Good Condition ........................................................................................................................$$115599,,550000
((22)) 22000044 CCaatt 995500GG IIII EROPS, A/C, Quick Coupler, G/P Bkt w/BOCE, Forks, Good23.5x25 Tires, Very Good Condition ..........................................................$$9922,,550000 EEaa..
MOTOR GRADERS22000033 CCaatt 1166HH EROPS, A/C, 16' Hyd, S/S Moldboard, Tip Control, Accumulators, ,Circle Drive Sup Clutch, Push Block, Ripper, Diff Lock/Unlock, Good 23.5x25 Tires,Very Good Condition ..........................................................................................$$CCAALLLL11999999 CCaatt 114400HH EROPS, A/C, 14' Hyd, S/S Moldboard, Tip Control, Diff Lock/Unlock,Good 17.5x25 Tires, Very Good Condition ......................................................$$9955,,000000
SCRAPERS22000044 CCaatt 662233GG EROPS, A/C, Power Train Guard, Good 33.25x29 Tires, ExcellentCondition ........................................................................................................$$223399,,550000((22)) 22000000 CCaatt 662277FF EROPS, A/C, Push/Pull, Trans Guard, “0” Hrs on Rblt Hitch, VeryGood Tires, Very Good Condition ..................................................$$116699,,550000--$$222299,,550000
COMPACTORS11999977 CCaatt CCPP556633CC EROPS, A/C, Padfoot Drum, 2 Speed Propel, Good Tires, GoodCondition, Service History ................................................................................$$3366,,550000
RIGID FRAME TRUCKS11999999 CCaatt 777777DD EROPS, A/C, Retarder, Supp Steering, Muffler, AETA, Liners, VeryGood 27:00R49 Tires, Very Good Condition, Service History, "0" Hours on ExchangeEngine, Radiator & Rebuilt Torque ................................................................$$669955,,00000011999999 CCaatt 777777DD EROPS, A/C, Retarder, Supp Steering, Muffler, AETA, Liners, Good27:00R49 Tires, Very Good Condition, Service History ..................................$$556655,,00000011999988 CCaatt 777777DD EROPS, A/C, Retarder, Supp Steering, Muffler, AETA, Liners, Good27:00R49 Tires, Very Good Condition, Service History ..................................$$449999,,55000011999988 CCaatt 777777DD EROPS, A/C, Retarder, Supp Steering, Muffler, AETA, Liners, Good27:00R49 Tires, Very Good Condition, Service History ..................................$$449999,,55000011999988 CCaatt 777777DD EROPS, A/C, Retarder, Supp Steering, Auto Lube, AETA, MufflerDiverter, Excellent 27:00R49 Tires, Very Good Condition ..............................$$447755,,000000((22)) 11999955 CCaatt 777777CC EROPS, A/C, Retarder, Supp Steering, AETA, Wet Disc FrontBrakes, Payload Monitor, Bed Liners, Very Good 27:00R49 Tires, Very GoodCondition, Service History, One Owner Since new ..............................................$$CCAALLLL11999944 CCaatt 777777CC 13,254 Hrs, EROPS, A/C, Muffler, AETA, Wet Disc Front Brakes,Tailgate, Very Good 27:00R49 Tires, Excellent Condition ..............................$$332299,,550000((22)) 11999977 CCaatt 777755DD EROPS, A/C, Retarder, Supp Steering, Muffler, Good 24:00R35Tires, Good Condition, Service History ..........................................................$$118844,,550000((22)) 22000044 CCaatt 777755EE EROPS, A/C, Retarder, Supp Steering, AETA, Auto Lube, Good24:00R35 Tires, Very Good Condition ............................................................$$335599,,55000022000022 CCaatt 777733DD EROPS, A/C, Retarder, Supp Steering, AETA, Auto Lube, Bed Liners,Very Good 24:0035 Tires, Good Condition, Dealer Maintained Since New, Full ServiceHistory ............................................................................................................$$223399,,55000011999977 CCaatt 777733DD EROPS, A/C, Retarder, Supp Steering, Muffler, Good 24:00R35 Tires,Good Condition, Service History ....................................................................$$118844,,550000((22)) 22000044 CCaatt 777733EE EROPS, A/C, Retarder, Supp Steering, AETA, Auto Lube, Liners,Good 24:00R35 Tires, Very Good Condition ..................................................$$335599,,550000((22)) 22000044 CCaatt 776699DD EROPS, A/C, Retarder, Supp Steering, AETA, Very Good Tires,Very Good Condition ................................................................................$$225599,,550000 EEaa..11999955 EEuucclliidd RR6655 EROPS, Retarder, Cummins TA28C, Good 24:00R35 Tires, goodcondition ........................................................................................................$$113399,,550000((22)) 22000000 KKoommaattssuu 333300MM EROPS, A/C, Retarder, Supp Steering, Very Good 27:00R49Tires, Very Good Condition ................................................................................$$CCAALLLL..
CAT 775ECAT D6RCAT 365BL CAT 777D CAT D8RCAT 16H
602 Wildlife Blvd. • Grand Prairie, TX 75050(972) 264-6700 • Fax: (972) 264-6720
an H-E PARTS INTERNATIONAL CompanyAlways part of the solution. Worldwide.
“We Own What We Advertise!”
www.dom-ex.com
(972) 264-6700