What is Nano-Technology?By using Nano-Technology it is possible to get a more efficient energy conversion.The goal of Nano-Technology is the modification and improvement of various properties of specific materials. Nano materials can be used to increase battery efficiency, for mini-batteries (though the use of nano-tubes in Li-Ion batteries) and for electrochemical capacitors (supercapacitors).

The batterylife Activator is a nano-ceramic-foil, which protects all new Li-Ion batteries and regenerates all used Li-Ion batteries.

The “turbobooster” for all devices with new and used rechargeable Li-Ion batteries - based on Nano-Technology

ACT150100

ACT5035

Application area

Tested by

30%longer battery operating life

Tested by TÜV Rheinland Group | Test report number: 21117255_001

more talktimeworks longer

shorter charging timelonger battery lifetime

longer standby timeeasy to use

very lightenvironmentally-friendly

Tested b

y

TÜV R

heinla

nd Gro

up

Test report

num

ber:

21117255_001

PDA

Please cut the Activator foil to match thesize of the Li-Ion battery (at least 80%

of one side of the Li-Ion battery must be covered by the foil).

MOBILEPHONES

GAMES

CAMERAS

MP3-PLAYER

NOTEBOOKS

CAMCORDER

PDA

Functional description of the batterylife Activator

������

���

ACT5035 for mobile phones and PDAs [ Size: 50 x 35mm ]

The effect and efficiency of the Activator may vary with the overall performance of the battery, production type, age, status (number of total recharges) and environmental condition of the battery.Please follow these instructions carefully. Capacity measuring devices should only be used for measuring the battery capacity and not for charging or discharging. The battery should be charged and discharged in the mobile phone or PDA to ensure the regeneration process works.

The ions inside the Li-Ion battery are reactivated and exited by the interaction of the magnetic fields around the battery and the batterylife Activator.A current-carrying conductor is sourrounded by a magnetic field proportional to the current. In a similar manner the current passing through a battery also creates a magnetic field. Due to the varying operating states of the device, magnetic fields of varying intensity are built up around the battery. These magnetic fields induce a varying current in the batterylife Activator, which in turn builds up a varying magnetic field around itself. The interaction resulting from these two magnetic fields excites the ions inside the battery.A greater number of free-flowing ions in the battery results in a better utilization of the battery capacity.

The result:•Used batteries can therefore be regenerated by activation of additional ions and reactivation of inactive ions. The full flow and exchange of charges within the battery is re-established.•New batteries are effectively protected against ageing by the batterylife Activator, because a sufficient number of ions are always available. The full flow of charges within the battery is ensured.The batterylife Activator effect is usually noticeable after about 10 charge/discharge cycles but depends on the type of battery.In cylindrical cells the effect is noticeable after about 30 charge/discharge cycles.

batterylife AG, branch office Pegnitz | Nuernberger Strasse 41 | D-91257 PegnitzFon: +49 (0) 9241-8099-0 | Fax: +49 (0) 9241-8099-72batterylife AG assumes no liability for mistakes in the text! batterylife AG reserves the right to alter product designs without notification!© batterylife AG. All rights rederved. All logos and brand names are properties of the respective owners.

info@batterylife.de | www.batterylife.de

The “turbobooster” for all devices with new and used rechargeable Li-Ion batteries - based on Nano-Technology

Remove the battery from the device. Peel the protective foil from the batterylife Activator and attach the Activator to the battery. Reconnect the battery to the device.

Remove the battery from the device. Peel the protective foil from the batterylife Activator and attach the Activator to the battery. Reconnect the battery to the device.

ACT150100 for Notebooks[ Size: 150 x 100mm ]

The effect and efficiency of the Activator may vary with the overall performance of the battery, production type, age, status (number of total recharges) and environmental condition of the battery.Please follow these instructions carefully. Capacity measuring devices shouldonly be used for measuring the battery capacity and not for charging or discharging. The battery should be charged and discharged in the notebook PC to ensure the regeneration process works.