whees soft rubber wheels sr wheels - …...these wheels have a center line located in the middle of...

100

UP TO

200

LBS C

APAC

ITY

SOFT RUBBER WHEELS SR WHEELS

www.CasterDepot.com/RWM

RUBB

ER

RWM Caster's Soft Rubber Wheels are manufactured of quality materials with a resilient rubber tread bonded to a hard rubber core. These wheels are an economical choice for moving equipment.

RWM Caster's Soft Rubber Wheels are a good choice for those applications where the average load is light with occasional loads using the full capacity of the wheel. Soft Rubber Wheels offer floor protection but can leave black marks on floors. Soft Rubber Wheels wear on rough surfaces and can become brittle if left outdoors, exposed to the elements. Economical in smaller sizes, Soft Rubber Wheels become more expensive in larger sizes, especially when premium rubber material is used.

Wheel Bearings Choice of straight roller bearing or oilite bearings

Durometer 70-80ATemperature

Range -40°F to 120°F

FEATURES

APPLICATIONS

OPTIONSDUST COVERS

DC Dust CoverDUST COVERS

TG Thread Guards

SEALSWS Wheel Seals

SEE PAGE 1 FOR DETAILS

SRO-3512-06

WH

EELS

Roller Bearing Tapered BearingWheel Diameter

WheelWidth Capacity Axle

DiameterHub

LengthApprox Weight

3" 1-1/4"150 5/16" SRO-0312-05 1-1/2" 0.7

150 3/8" SRO-0312-06 1-1/2” 0.7

3-1/2" 1-1/4"150 5/16" SRO-3512-05 1-1/2" 0.8

150 3/8" SRO-3512-06 1-1/2” 0.8

4" 1-1/4"180 5/16" SRO-0412-05 1-1/2" 1.1

180 3/8" SRO-0412-06 1-1/2” 1.1

4" 1-1/2"

200 1/2" SRR-0415-08 SRO-0415-08 1-7/8" 1.3

200 5/8" SRR-0415-10 SRO-0415-10 1-7/8” 1.3

200 3/4" SRR-0415-12 1-7/8” 1.3

101

UP TO 280 LBS CAPACITY


RUBBERW

HEELS

HARD RUBBER WHEELSHR WHEELSRWM Caster's Hard Rubber Wheels offer good floor pro-tection, are quieter than steel wheels, and are strong and chip resistant. These wheels have a center line located in the middle of the tread. This center line, even when removed as close as possible, can cause damage to soft inexpensive floors. Hard Rubber Wheels can become brittle over time, and more so when exposed to outdoor elements. Hard Rubber Wheels can crack when dropped from limited heights or subjected to impact or shock.

RWM Caster's Hard Rubber Wheels are used where low cost, easy rolling wheels are required.

Wheel Bearings Oilite bearings Durometer 70-75D

Temperature Range -30°F to 160°F

FEATURES

APPLICATIONS

OPTIONSDUST COVERS

DC Dust CoverFITTINGS

SI Spanner Included


HRO-3512-06

Oilite BearingWheel Diameter


DiameterHub

LengthApprox Weight

3" 1-1/4"250 5/16" HRO-0312-05-SI 1-1/2" 0.8

250 3/8" HRO-0312-06 1-1/2” 0.8

3-1/2" 1-1/4"250 5/16" HRO-3512-05 1-1/2" 1

250 3/8" HRO-3512-06 1-1/2” 1

4" 1-1/4"260 5/16" HRO-0412-05 1-1/2" 1.2

260 3/8" HRO-0412-06 1-1/2” 1.2

UP TO

600

LBS C

APAC

ITY

PERFORMANCE TPR WHEELS


RUBB

ER

The Performance TPR (Thermal Plastic Rubber or TPE for Thermal Plastic Elastomer) Wheel is specially engi-neered to provide unsurpassed durability and reliability. This premium wheel combines the durability of a hard tread wheel with the quiet floor protection of a soft tread wheel. They are made of a thermoplastic elastomer which is permanently bonded to a polypropylene core and will not mark floors. The Performance TPR wheel is resistant to chemicals, acids, bases, alcohols, salts and steam. The Performance TPR Wheel tread material can be made to various durometers.

The Performance Wheel is available with a flat tread to provide maximum load surface or round tread to provid-ed easy turning. Round tread is only available on the 6" x 2" and 8" x 2" wheels.

Wheel Bearings Choice of straight roller bearing, celcon and annular ball bearing

Temperature Range

-45° to 120°F continuous;180°F intermittent

Bores Various sizes available on some wheels Hardness 65 to 70+/-5 Shore A Durometer

FEATURES

OPTIONSGUARDS

TG Thread Guards on 1-1/4”,1-1/2” & 2” wide

SEALSWS Wheel Seals (roller bearing only)

FITTINGSZF Zerk Fittings

RPR-0820-19

RPR-0821-19

WH

EELS

102

APPLICATIONSPlatform carts Food services

Material handling carts Drywall carts

Warehouse and factory applications Assembly line dollies

UP TO 600 LBS CAPACITYRP WHEELS

Roller Bearing Ball Bearing Plain BearingWheel Diameter


DiameterHub

LengthApprox Weight


RUBBERSEE PAGE 1 FOR DETAILS

WH

EELS

FLAT TREAD3” 1-1/4” 190 3/8” RPB-0312-06 RPC-0312-06 1-1/2” 0.22

3 -1/2” 1-1/4” 200 3/8” RPB-3512-06 RPC-3512-06 1-1/2” 0.29

4” 1-1/4” 275 3/8” RPB-0412-06 RPC-0412-06 1-1/2” 0.34

4” 1-1/2”

325 1/2” RPR-0415-08 RPB-0415-08 RPC-0415-08 1-7/8” 0.60

325 5/8” RPR-0415-10 RPC-0415-10 1-7/8” 0.60

325 3/4” RPR-0415-12 RPC-0415-12 1-7/8” 0.60

4” 2”

350 1/2” RPR-0420-08 RPB-0420-08 RPC-0420-08 2-7/16” 0.66

350 5/8” RPR-0420-10 RPC-0420-10 2-7/16” 0.66

350 3/4” RPR-0420-12 RPC-0420-12 2-7/16” 0.66

5 1-1/4” 300 3/8” RPB-0512-06 RPC-0512-06 1-1/2” 0.52

5” 1-1/2”

350 1/2” RPR-0515-08 RPB-0515-08 RPC-0515-08 1-7/8” 0.85

350 5/8” RPR-0515-10 RPC-0515-10 1-7/8” 0.85

350 3/4” RPR-0515-12 RPC-0515-12 1-7/8” 0.85

5” 2”

375 1/2” RPR-0520-08 RPB-0520-08 RPC-0520-08 2-7/16” 0.96

375 5/8” RPR-0520-10 RPC-0520-10 2-7/16” 0.96

375 3/4” RPR-0520-12 RPC-0520-12 2-7/16” 0.96

6” 1-1/2”

475 1/2” RPR-0615-08 RPB-0615-08 RPC-0615-08 1-7/8” 1.85

475 5/8” RPR-0615-10 RPC-0615-10 1-7/8” 1.85

475 3/4” RPR-0615-12 RPC-0615-12 1-7/8” 1.85

6” 2”

525 1/2” RPR-0620-08 RPB-0620-08 RPC-0620-08 2-7/16” 1.38

525 5/8” RPR-0620-10 RPC-0620-10 2-7/16” 1.38

525 3/4” RPR-0620-12 RPC-0620-12 2-7/16” 1.38

8” 2”

600 1/2” RPR-0820-08 RPB-0820-08 RPC-0820-08 2-7/16” 2.02

600 5/8” RPR-0820-10 RPC-0820-10 2-7/16” 2.02

600 3/4” RPR-0820-12 RPC-0820-12 2-7/16” 2.02

ROUND TREAD

6” 2”

525 1/2” RPR-0621-08 RPB-0621-08 RPC-0621-08 2-7/16” 1.38

525 5/8” RPR-0621-10 RPC-0621-10 2-7/16” 1.38

525 3/4” RPR-0621-12 RPC-0621-12 2-7/16” 1.38

8” 2”

600 1/2” RPR-0821-08 RPB-0821-08 RPC-0821-08 2-7/16” 2.02

600 5/8” RPR-0821-10 RPC-0821-10 2-7/16” 2.02

600 3/4” RPR-0821-12 RPC-0821-12 2-7/16” 2.02

103

UP TO

700

LBS C

APAC

ITY


RUBB

ER

The RWM Casters Signature™ Premium Wheel has a lightweight, reinforced nylon core with a high strength non-marking elastomeric rubber tread. The round tread provides easy rolling. Our durable nylon core is six times stronger than polypropylene. The performance rubber tread is cut, tear and corrosion resistant and will not chunk out. It has the highest strength-to-weight ratio than any other wheel in the industry. The Signature™ Premium Wheel is excellent for floor protection, continuous towing and noise reduction.

Wheel Bearings Choice of straight roller or precision ball bearing

Temperature Range -40° to 200°F

Hardness 70 Shore ABores 1.190"

FEATURES

SWB-0820-08

SWB-0412-06

WH

EELS

APPLICATIONSPlatform carts Food services

Material handling carts Drywall carts

Warehouse and factory applications Assembly line dollies

104

45-SWB-0620-S 46-SWB-0620-S-42ST

UP TO 700 LBS CAPACITYSW WHEELS

Roller Bearing Ball BearingWheel Diameter


DiameterHub

LengthApprox Weight



WH

EELS

3.5” 1.25” 225 3/8” SWB-3512-06 1-5/8” .6

4” 1.25” 250 3/8” SWB-0412-06 1-5/8” .7

4” 2” 400 1/2” SWR-0420-08 SWB-0420-08 2-7/16” 1.3

5” 1.25” 250 3/8” SWB-0512-06 1-5/8” 1

5” 2” 500 1/2” SWR-0520-08 SWB-0520-08 2-7/16” 1.5

6” 1.25” 300 3/8” SWB-0612-06 1-5/8” 1.5

6” 2” 600 1/2” SWR-0620-08 SWB-0620-08 2-7/16” 2.0

8” 2” 700 1/2” SWR-0820-08 SWB-0820-08 2-7/16” 2.8

105

RWM’s in-house test facility puts an elastomeric high tensile rubber wheel

to work.

UP TO

2,8

00 LB

S CAP

ACIT

Y


RUBB

ER

RWM rubber tread wheels are constructed by molding high quality rubber to cast iron cores. All RWM mold-on rubber wheels are floor protective, provide long tread life, are quiet in operation and are highly resilient. These wheels are suggested for use on all types of floors and numerous applications. The standard RWM mold-on rubber tread is 75 durometer Shore A.

Hardness 70-75 Shore A DurometerTemperature

Rating-30° to 140°F continuous;180°F intermittent.

FEATURES

RIR-0830-16

RIR-0820-08

WH

EELS

APPLICATIONSTrash containers Lumber carts

Platform carts Many manually-pushed low-cost applications

MOLD-ON RUBBER WHEELS

OPTIONSSPANNERS

SI Spanner IncludedLENGTH

YY Shorter Hub Length



DiameterHub

LengthApprox Weight

4” 1-1/2”250 1/2” RIR-0415-08 1-7/8” 1.2250 5/8” RIR-0415-10 1-7/8” 1.2250 3/4” RIR-0415-12 1-7/8” 1.2

4” 2”350 1/2” RIR-0420-08 2-7/16” 3.1350 5/8” RIR-0420-10 2-7/16” 3.1350 3/4” RIR-0420-12 2-7/16” 3.1

5” 1-1/2”300 1/2” RIR-0515-08 1-7/8” 2.0300 5/8” RIR-0515-10 1-7/8” 2.0300 3/4” RIR-0515-12 1-7/8” 2.0

5” 2”400 1/2” RIR-0520-08 2-7/16” 3.5400 5/8” RIR-0520-10 2-7/16” 3.5400 3/4” RIR-0520-12 2-7/16” 3.5

6” 1-1/2”370 1/2” RIR-0615-08 1-7/8” 2.3370 5/8” RIR-0615-10 1-7/8” 2.3370 3/4” RIR-0615-12 1-7/8” 2.3

6” 2”410 1/2” RIR-0620-08 2-7/16” 4.1410 5/8” RIR-0620-10 2-7/16” 4.1410 3/4” RIR-0620-12 2-7/16” 4.1

6” 2-1/2”

540 3/4” RIR-0625-12-YY 3” 7.8540 1” RIR-0625-16-YY 3” 7.8540 1” RIR-0625-16-YY-SI 3” 7.8540 1-1/4” RIR-0625-20-YY 3” 7.8540 3/4” RIR-0625-12 3-1/2” 10.0540 1” RIR-0625-16 3-1/2” 10.0540 1” RIR-0625-16-SI 3-1/2” 10.0540 1-1/4” RIR-0625-20 3-1/2” 10.0

106

UP TO 2,800 LBS CAPACITYRI WHEELS



WH

EELS



DiameterHub

LengthApprox Weight

6” 3”

680 3/4” RIR-0630-12 3-1/2” 11.2680 1” RIR-0630-16 3-1/2” 11.2680 1” RIR-0630-16-SI 3-1/2” 11.2680 1-1/4” RIR-0630-20 3-1/2” 11.2

8” 2”500 1/2” RIR-0820-08 2-7/16” 6.3500 5/8” RIR-0820-10 2-7/16” 6.3500 3/4” RIR-0820-12 2-7/16” 6.3

8” 2-1/2”

670 3/4” RIR-0825-12-YY 3” 11.1670 1” RIR-0825-16-YY 3” 11.1670 1” RIR-0825-16-YY-SI 3” 11.1670 1-1/4” RIR-0825-20-YY 3” 11.1670 3/4” RIR-0825-12 3-1/2” 11.5670 1” RIR-0825-16 3-1/2” 11.5670 1” RIR-0825-16-SI 3-1/2” 11.5670 1-1/4” RIR-0825-20 3-1/2” 11.5

8” 3”

840 3/4” RIR-0830-12 3-1/2” 13.0840 1” RIR-0830-16 3-1/2” 13.0840 1” RIR-0830-16-SI 3-1/2” 13.0840 1-1/4” RIR-0830-20 3-1/2” 13.0790 3/4” RIR-1025-12-YY RIT-1025-12-YY 3” 13.0790 1” RIR-1025-16-YY RIT-1025-16-YY 3” 13.0790 1” RIR-1025-16-YY-SI 3” 13.0

10” 2-1/2” 790 1-1/4” RIR-1025-20-YY 3” 13.0790 3/4” RIR-1025-12 RIT-1025-12 3-1/2” 13.0790 1” RIR-1025-16 RIT-1025-16 3-1/2” 13.0790 1” RIR-1025-16-SI 3-1/2” 13.0790 1-1/4” RIR-1025-20 3-1/2” 13.0

10” 3”

1000 3/4” RIR-1030-12 RIT-1030-12 3-1/2” 15.01000 1” RIR-1030-16 RIT-1030-16 3-1/2” 15.01000 1” RIR-1030-16-SI 3-1/2” 15.01000 1-1/4” RIR-1030-20 3-1/2” 15.0

10” 4”

1400 3/4” RIR-1040-12 RIT-1040-12 4-1/2” 30.01400 1” RIR-1040-16-SI RIT-1040-16 4-1/2” 30.01400 1-1/4” RIR-1040-20 RIT-1040-20 4-1/2” 30.01400 1-1/4” RIR-1040-20-SI 4-1/2” 30.01400 1-1/2” RIR-1040-24 RIT-1040-24 4-1/2” 30.0

11” 5” 1760 1-1/4” RIR-1150-20 RIT-1150-20 5-1/2” 42.0

12” 2-1/2”

900 3/4” RIR-1225-12-YY RIT-1225-12-YY 3” 16.0900 1” RIR-1225-16-YY RIT-1225-16-YY 3” 16.0900 1” RIR-1225-16-SI-YY 3” 16.0900 1 1/4” RIR-1225-20-YY 3” 16.0

12” 3”


12” 4”

1600 1” RIR-1240-16-SI RIT-1240-16 4-1/2” 26.01600 1-1/4” RIR-1240-20 RIT-1240-20 4-1/2” 26.01600 1-1/4” RIR-1240-20-SI 4-1/2” 26.01600 1-1/2” RIR-1240-24 RIT-1240-24 4-1/2” 26.0

12” 5” 2050 1-1/4” RIR-1250-20 RIT-1250-20 5-1/2” 40.0

16” 3”


18” 3”


18” 5” 2800 1-1/4” RIR-1850-20 RIT-1850-20 5-1/2” 50.02800 1-1/2” RIR-1850-24 RIT-1850-24 5-1/2” 50.0

107

UP TO

2,2

80 LB

S CAP

ACIT

YEHT ON IRON



DiameterHub

LengthApprox Weight


EHT

RUBB

ER

RWM Caster's Elastomeric High Tensile Rubber Wheels are incredible molded rubber wheels. The solid core provides superior strength and the rubber does not chunk out. Our rubber wheels perform well at 200% of normal molded rubber capacity and are excellent for towing applications. These Elastomeric High Tensile Rubber Wheels may mark floors. RWM Caster's lighter rubber wheels reduce the weight of carts and increase amount of loads that carts can carry.

Hardness 70-75 Shore A DurometerFEATURES


RIR-0830-31-EHT

WH

EELS

APPLICATIONSAll purpose towing

ELASTOMERIC HIGH TENSILE RUBBER WHEELS

OPTIONSSI Spanner Included

6” 2-1/2”

1080 3/4” RIR-0625-12-EHT-SI RIT-0625-12-EHT 3-1/2” 10.01080 1” RIR-0625-16-EHT RIT-0625-16-EHT 3-1/2” 10.01080 1” RIR-0625-16-EHT-SI 3-1/2” 10.01080 1-1/4” RIR-0625-20-EHT 3-1/2” 10.0

6” 3”


8” 2-1/2”

1340 3/4” RIR-0825-12-EHT-SI RIT-0825-12-EHT 3-1/2” 11.51340 1” RIR-0825-16-EHT RIT-0825-16-EHT 3-1/2” 11.51340 1” RIR-0825-16-EHT-SI 3-1/2” 11.51340 1-1/4” RIR-0825-20-EHT 3-1/2” 11.51680 3/4” RIR-0830-12-EHT-SI RIT-0830-12-EHT 3-1/2” 13.0

8” 3” 1680 1” RIR-0830-16-EHT-SI 3-1/2” 13.01680 1” RIR-0830-16-EHT RIT-0830-16-EHT 3-1/2” 13.01680 1-1/4” RIR-0830-20-EHT 3-1/2” 13.0

10” 2-1/2”


10” 3”


12” 3”


108

ELASTOMERIC HIGH TENSILE NON-MARKING RUBBER WHEELSUP TO 2,280 LBS CAPACITY


EHT RUBBERW

HEELS

109

RWM Caster's Elastomeric High Tensile Non-Marking Rubber Wheels are incredible molded rubber wheels. The high quality, high tensile premium rubber is bonded to a heavy-duty solid web aluminum core that provides superior strength. These wheels are rat-ed at 200% more than normal molded rubber wheels. This rubber wheel will not crack, chunk, dry out or debond. These Elastomeric High Tensile Non-Marking Rubber Wheels are excellent for towing applications in both indoor or outdoor environments. The special compound will not mark your floors. These rubber wheels can be used at higher rated towing speeds than other wheels. Please contact the factory for additional information.

Hardness 70-75 Shore A DurometerTemperature

Rating-30° to 140°F continuous;180°F intermittent.

FEATURES

RAB-0820-08-EHT-NM

APPLICATIONSAerospace tooling Ground support equipment

Large assembly parts Automotive plants

Freight terminals Continuous use operations


NON-MARKINGEHT ON ALUMINUM

Ball Bearing Tapered BearingWheel Diameter


DiameterHub

LengthApprox Weight

4” 2”700 1/2” RAB-0420-08-EHT-NM 2-1/2” 1.6700 5/8” 2-1/2” 1.6

5” 2”800 1/2” RAB-0520-08-EHT-NM 2-1/2” 2.0800 5/8” 2-1/2” 2.0

6” 2”820 1/2” RAB-0620-08-EHT-NM 2-1/2” 2.7820 5/8” 2-1/2” 2.7

8” 2”1000 1/2” RAB-0820-08-EHT-NM 2-1/2” 3.71000 5/8” 2-1/2” 3.7

8” 3”1500 3/4” RAB-0830-12-EHT-NM RAT-0830-12-EHT-NM 3-1/2” 81500 1” RAB-0830-16-EHT-NM RAT-0830-16-EHT-NM 3-1/2” 8

10” 3”2000 3/4” RAB-1030-12-EHT-NM RAT-1030-12-EHT-NM 3-1/2” 10.02000 1” RAB-1030-16-EHT-NM RAT-1030-16-EHT-NM 3-1/2” 10.0

12” 3”2280 3/4” RAB-1230-12-EHT-NM RAT-1230-12-EHT-NM 3-1/2” 14.52280 1” RAB-1230-16-EHT-NM RAT-1230-16-EHT-NM 3-1/2” 14.52280 1-1/4” RAT-1230-20-EHT-NM 3-1/2” 14.5

whees soft rubber wheels sr wheels - …...these wheels have a center line located in the middle of...

Documents