When water can spoil it;we gaurd it...

Wat

erpr

oofing

Solut

ions

Presenting Weber Waterproofing Solution.

weber mixIL is a specially designed integral waterproofing additive for cement mortar, plaster and concrete to prevent against water ingress. This additive is compatible with different grade of cement & reacts with the cementitious matrix to provide water repellent properties by improving workability & cohesiveness of mortar and concrete.

Features ● The permeability of water gets reduced in concrete and mortar, resulting in more durable concrete.● The compressive strength of the concrete and mortar remains within h specification limits. ● Workability of concrete and mortar is improved. It is in liquid form, gets easily dispersed in concrete and mortar. ● Minimizes shrinkage cracks in concrete and mortar.● Reduces rebound loss due to better adhesion.● Economical in use.

Integralwaterproofing

additive�tec

mixIL

Pack Size: 1 lit, 5 lit, 20 lit

weber sbr and weber sbr litX both are styrene-butadiene copolymer latex liquid, which can be used as a modifier for concrete/cement mortar, providing them properties, so that they can be used for waterproofing, for repairs of spalled concrete and plaster, as a bonding agent and for high-performance plaster.

Features ● The permeability of water gets reduced in concrete and mortar, resulting in more durable concrete.● It does not significantly modify the characteristics of the fresh concrete and mortar, nor the compressive strength.● Workability of concrete and mortar is improved.● It is in liquid form, gets easily dispersed in concrete and mortar.● Economical in use● It does not require any protection screed since it does not form any membrane and becomes an integral part of concrete.● Shrinkage cracks are minimized in concrete and mortar.● Improves cohesion and hence reduces the segregation.

Webersbr litX

Styrenebutadiene

rubber latex

Pack Size: 1 lit, 5 lit, 20 lit

Webertec crete is an acrylic emulsion used as waterproof and damp-proof coating in the form of cement slurry. It is used as multipurpose additive for enhancing the performance of concrete / mortar mix and can be used for internal as well as external applications.

Features

● It can be used as a multipurpose additive for enhancing the performance

of concrete / mortar mix.

● It can be used for both internal as well as external applications. Nontoxic,

suitable for use in potable water.

● It improves the workability of mixes.

● It makes the structure impermeable to liquids.

● Waterproof layer subjected to foot traffic, needs screed protection

An acrylicadditive for

waterproof anddamp-proof

coating�tec

crete

Pack Size: 1 lit, 5 lit, 20 lit

WaterproofingIMPERMEABILITY

ADDITIVES

EASYTO APPLY LOW VOC

PREVENTSEFFLORESCENCE in.weber/weber-mixil

Scan QR Code for more details:

ADDITIVES IMPERMEABILITY

ECONOMIC LOW VOC

in.weber/weber-crete

Scan QR Code for more details:

in.weber/weber-sbr-litx

Scan QR Code for more details:

IMPERMEABILITY

ADDITIVESRENOVATION

WORKENVIRONMENTALLY

FRIENDLY

LOW VOC ECONOMIC

Technical parametersAppearance : Free flow liquidpH : 11+/- 1Specific gravity (@27degC) : 1+/-0.05

Technical parameters

Technical parameters

Appearance Milky white

Solid content 30+

Specific Gravity 1.030+/0.01gCC @25° celsius

pH 9-11

Pot Life (Cement Slurry) 1 Hour at 25° celsius

weber waterguard is a two-component high-performance acrylic polymer modified cementitious membrane coating for under tile waterproofing. Weber waterguard protects gypsum board, cementitious board, and concrete against water penetration. It provides high resistance to the effect of long-term weathering and durable in almost every climatic conditions.

Features ● It is an elastomeric two-component system cementitious membrane coating, which makes it flexible enough to bridge hairline cracks.● It protects the gypsum board, cementitious board, and concrete against water penetration under long-term weathering.● Highly durable and economical.● Easily brush applied.● Non-toxic in nature.● It can be used for both, internal and external applications.

Weberwaterguard

Premixself curingmasonrymortar

Pack Size: 20 kg Component A and 20 L Component B

Weberprimer 401 is a high performance acrylic based waterproofing primer with excellent bonding agent properties with the substrate, the substrate can be gypsum board, cementitious board, new and old concrete. It yields into overall strength properties of water proofing coating system.

Features ● Increase adhesion between substrate and waterproofing material.● Provide high durability of waterproofing coating even in continuous contact with water.● Easily brush applied.● Non-toxic.● It can be used for both internal and external applications.● Application on various surface.

Acrylic basedwaterproofing

primer�

primer401

Pack Size: 20 Lit Bucket

weber waterseal 321 is a two component polymer modified, elastomeric cementitious waterproofing coating which requires adding only clean water at the site for an easy brushable consistency.

Features ● It provides high water impermeability at 5 bar pressure.● It can be used for both internal and external applications.● It provides excellent bonding to masonry, concrete and non porous surfaces.● It provides resistance against the attack of carbon dioxide and chloride-ion diffusion.● Suitable for retaining structure against water ingress.● It resists strongly effect of long term weathering, climatic conditions including UV exposed areas.● Nontoxic in nature.● Easy to apply and economical in use.● Breathable in nature allow the water vapor to escape from the structure, have good crack bridging properties.● It can be applied for both existing and new surfaces.

Weberwaterseal 321

Styrenebutadiene

co- polymerlatex liquid

Pack Size: 20 lit drum and 1 lit bottle.

weber sbr & weber sbr litX are styrene butadiene co-polymer latex liquid, which can be used as a modifier for concrete / cement mortar, providing them properties, so that they can be used for waterproofing, for repairs of spalled concrete and plaster, as a bonding agent and for high performance plaster.

Features ● The permeability of water gets reduced in concrete and mortar, resulting in more durable concrete.● It does not significantly modify the characteristics of the fresh concrete and mortar, nor the compressive strength.● Workability of concrete and mortar is improved. It is in liquid form, gets easily dispersed in concrete and mortar.● Economical in use● It does not require any protection screed since it does not form any membrane and becomes an integral part of concrete.● Shrinkage cracks are minimized in concrete and mortar.● Improves cohesion and hence reduces the segregation.

Webersbr

Styrenebutadiene

co- polymerlatex liquid

Pack Size: 1 lit, 5 lit, 20 lit

IMPERMEABILITY

ADDITIVES

EASYTO APPLY

EASYTO APPLY

RENOVATION WORK

ENVIRONMENTALLYFRIENDLY

ENVIRONMENTALLYFRIENDLY

LOW VOC

in.weber/weber-sbr

Scan QR Code for more details:

Technical parametersAppearance Milky whiteSolid content 47%Specific Gravity 1.030+/0.01gCC @25° celsiuspH 9-11Pot Life (Cement Slurry) 1 Hour at 25° celsius

Technical parameters:Appearance Milky white pourable liquid% total Solids 47 +/- 1%pH at 25 deg cent 9.5 +/- 0.5Mixing Ratio 1 part liquid: 1 part waterBrookfield ViscositySP 1.12 r.p.m 100 maxat 25 deg centAdhesion Excellent

Technical parameters:Color GreyPot life @ 27deg c 80 minsMixed density 1.80 gm/ccBonding strength toconcrete @ ASTM D4541 > 1.1 MpaWater permeability@ DIN 1048 5 barToxicity test @ IS 6582 No toxicityTensile strength @ ASTMD 638 > 0.4 MpaApplication temperature 10 – 35 @ deg CRecoatable Yes

Technical parameters:Pot Life 30 minsMixing ratio 1 Parts powder : 1 Part LiquidColour Light GreyApplication Temperature 25-35 deg centigrateAdhesion to concrete Better than concrete’s internal bondRecoatable Yes

DURABILITY HIGH GRAB

ADD WATEREXTRA WATER

RESISTANT

Scan QR code to download android app for product information and technical data for our complete product range, directly from your smartphone.

Scan QR to download weberconsumption calculator App

https://goo.gl/d39avs

Weber tap-seal is a 3 ply waterproofing membrane to be used at intersection of pipes and boards. Its has two outer layers of polypropylene non - woven coating and one inner layer of polyethylene resistant to ageing.

Features ● Waterproofing membrane● For tap and pipe joints● Good flexibility● Resistant to ageing

Webertap-seal

Special coated 3-ply tape, high extension in cross direction and rigid length wise, thin and high tenacity. It has two layer of polypropylene non – woven coating thermoplastic elastomeric and resistance to ageing.

Features

● Non-woven flexible waterproofing tape.

● For the corner treatments.

● Resistant to aeging.

Non-wovenflexible

waterproofingtape

�stickon

Length per Roll : 50 meters

3-plywaterproofing

membrane,to beused at intersection

of pipes andboards.

Saint-Gobain India Pvt. Ltd. – Weber business, Corporate Office: 5th level, Leela Business Park, Andheri-Kurla Road, Andheri East, Mumbai – 400059 India. Email: weber-india@saint-gobain.com

www.in.weber

/SGWeberIndia/SaintGobainWeberIndia

/SaintGobainWeberIndia /company/saint-gobain-weber-india

/SaintGobainWeberIndia

Technical parameters:

Application Flashing for expansion and construction joints

Colour Grey

Total Width 120 mm

Total thickness (approx) 0.7 mm

Material weight (approx) 43 g/m

Resistance to temperature -5/+90 deg centigrade

(min/max)

Technical parameters:

Application As a waterproofing membrane

Colour Yellow

Total Width 120 mm X 120 mm, 300 mm X 300 mm

Total thickness (approx) 0.5 mm

Material weight (approx) 29.8 g/m

Resistance to temperature -5/+90 deg centigrade

(min/max)

Available in :120mmx120mm 300mmx300mm

in.weber/complete-waterproofing-solution