Where Can You Find Mauser Parts Online?

Some Mausers produced nearly 100 years ago that have been well kept are just asserviceable today as they were the day they were created. The Mauser 1898 action,which has three locking lugs, has been called the strongest, most dependable action ofall time, as there is a redundant locking lug to secure the action even if the first two lugsfail.

Nonetheless, Mausers, like all firearms, need the proper care and attention from time totime. Without it, their performance will suffer or fail entirely. While a Mauser bolt actioncan last over 100 years with proper care, even with care, you’ll need to replace somecomponents with the proper Mauser parts.

For example, the extractors, which are a part of the action, will eventually fail orcompletely break. That makes it frustrating to cycle the action of a repeater, to say theleast. Similarly, after several thousand rounds, or several tens of thousands of rounds,firing pins are likely to break too. They’re tough, but the repeated stresses can breakthem, rendering a firearm inoperable.

Speaking of tens of thousands of rounds, after sending that many downrange, you’reprobably going to notice that your rifle’s accuracy isn’t what it once was, even if the gunis squeaky clean, especially at ranges of more than 100 yards. That’s more than likely dueto the fact that you need to replace your barrel.

Every time you pull the trigger, an infinitesimal amount of material is worn away from thelands of your gun’s rifling. Compound those trigger pulls by a factor of thousands, andyour accuracy will start to run downhill. The only serviceable solution is a new barrel.

By the way, when you remove your barrel to replace it, you might be in for a surprise.Wood stocks can be notoriously finicky and require quite a bit of attention. Withoutbeing sealed and waxed or oiled, they’ll absorb a fair amount of water and can warp,diminishing accuracy. Excess moisture can cause rot, and different circumstances cancause dry rot. Even a well-cared-for rifle may need its stock replaced after 40 or 50 years.

The basic point here is that while the overall Mauser itself may remain a functionalmachine for much longer than expected, keeping it operational may require you toperform a bit of service to keep it all running smoothly. Whether you need a newextractor, barrel, stock, or even a set of new iron sights, you need to be in touch withthe right provider. One that not only has the Mauser parts themselves but is familiarwith the history of the manufacturer and can make the right recommendations foryou to make those fixes.

For those of you who collect historical arms, or simply have inherited a Mauser thatneeds some extra attention, visit Sarco, Inc. at SarcoInc.com. They’re the uncontestedexperts in firearms and parts and carry a wide range of hard-to-find parts andaccessories for Mausers and countless other infamous platforms, like the M1919,M1911, M2, M1, and M1 Carbine, among countless others. If you need a part for agun, they’ll help you find it.

They can also help you troubleshoot issues and potentially even makerepairs. A Mauser part won’t do you much good if you don’t know howto make the fix. Give them a call at 610-250-3960 if you’re not sure abouthow to make a repair, or if you’re close enough to them, pay them a visitat their storefront in Eason, Pennsylvania, at 50 Hilton Street.