Presented by Walter Ndlovu

Presentation Outline Introduction

Planning

Reputable brands we supply

Domestic and Commercial Specifications

Quality and aesthetics

After sales service

Value Added Services

Peace of mind to the professional and the client

Waterloo Bathrooms Contact Information

The reputable brands we supply.

IntroductionDomestic and commercial bathroom fittings design and supply is our business.

At Waterloo bathrooms we stand to advise our clients in purchasing quality products that are SABS approved and meet the plumbing industry requirements. We strongly believe that the water design system is just as important as the point of use products installed.

We get involved on projects from;

planning,

product specification,

purchasing,

installation and maintenance (advising only).

Planning

Planning plays a very vital role in all building projects. Waterloo Bathrooms gets involved during the planning stage to make sure correct bathroom fittings are specified for the correct application.

This applies to both residential and commercial developments and renovations.

We pay a very special attention to the client’s taste and preference when assisting with the specifications.

Residential specifications

Commercial specifications

The quality and aesthetics of our products.

The different products we offer are sure to satisfy every client’s taste and style and offer a world class aesthetics and user comfort.

STEEL ENAMEL BATHS

STEEL ENAMEL PRODUCTS WITH A 30-YEAR GUARANTEE

Steel enamel combines robust steel and tough glass to form an inseparable bond harnessing the strengths of each material in perfect symbiosis. Steel enamel products guarantee lasting quality that remains visible, tangible and irresistible day after day.

Scratch, abrasion and

impact resistant.

The steel enamel is much

harder than acrylic and

highly resistant to

mechanical stress

Acid and chemical

resistant

Common household

detergents, cosmetic and

bath additives or perfume

will not harm the surface

Heat resistant

Burning and glowing

objects such as candles or

cigarettes do not leave

marks on the surface

Colour fast and UV light

resistant.

The Steel enamel retains its

original colour without

fading or yellowing.

Dimensionally stable.

The steel enamel baths and

shower trays hardly expand

at all in temperature

fluctuations, thereby

reducing the risk of

cracked joints or structural

damage through moisture

penetration.

Hygienic and easy to

clean.

The glass-hard surface is

hygienic and easy to

clean.

CONEALED FLUSHING MECHANISMS

Shower wastes and channels

The Proactive Approach

Water heating systems; geysers/heatpumps.

Mixers, Taps and flush valves.

These fittings need a constant servicing so that they do not fail by themselves.

At Waterloo Bathrooms we ensure that the manufacturers of the products we supply give us the maintenance intervals to avoid unplanned product failures.

Preventive maintenance

The overall condition of plumbing systems, or the level of maintenance, is an issue that is always present, even with new systems.

Regular preventive inspection, is a necessary part of any plumbing system maintenance program. We assist in putting this together for free on all the projects we supply.

Outlining Challenges

Typical plumbing concerns for all facilities include repairing toilets, wash hand basins and showers; maintaining piping systems throughout the facility for air, water, and gas; keeping drain systems and waste-water lines open and operating properly; and maintaining sprinkler systems and heads, valves, and other fire-safety equipment. Keeping up with the industry regulatory requirements.

A Closer Look

Among the area factors that will affect managers’ strategies for plumbing system maintenance are the type, age, design and condition of systems and fixtures.

Emerging Issues

Several plumbing related issues seem certain to affect specifiers’ decisions on specifying plumbing products and performing system maintenance.

Complex facility plumbing distribution systems —especially hot water and cooling tower water —have been linked to occurrences of Legionnaire’s disease in those facilities. Among the specific corrective actions managers can implement:

A Closer LookNot allowing water stagnation or sediment build ups.Ensure that water temperatures stay below 20 degrees C or above 55 degrees C.• Remove dead legs in piping systems.• Avoid rubber washers and gaskets.• Replace heavily scaled taps and mixers, aerators, and shower

heads.• SABS SANS compliance concerns both hospital and non-

hospital facilities. But hospitals have a much wider application of requirements for taps and flush valves that are operable with electronic sensors, foot controls or wrist-blade levers, and compliant under-sink pipe covers.

Value Waterloo Bathrooms adds to your business:

• Free technical training to the maintenance team and /or the plumber on handover.

• Waterloo Bathrooms puts a preventive maintenance booklet together designed for each specific project.

• Enforce warrantees from the manufacturers and importers alike.

• Technical knowledge of the laws with regards to fittings, SANS, 10252; 10254; 10106

• On site assessments.

Water Filtration

Angle Regulating Valves With filter Without Filter

After sales services

Warranty. A warranty allows the goods to be repaired or replaced for free if it breaks down within a certain period of time after purchase.

All of the products we supply are under warranty.

We encourage all professionals to request a product warranty letter from every supplier.

Peace of mind to the client & professionals.

Quality products specified give peace of mind to both the client and the professional(architect) alike.

Professional liability insurance is coverage that protects an architectural firm and its employees against claims alleging negligent acts, errors, or omissions in the performance of architectural services.

Firms take 10 million rand cover for electrical, plumbing, structure for a period of 10 years.

Waterloo Bathrooms stands to back the professionals through the SABS approved products, water design systems and onsite assistance.

Col-Walts Holdings (Pty) Ltd t/a Waterloo Bathrooms

Business Address: Shop 3 Sunrise Centre,

Cnr Hendrick Potgieter & Van Riebeeck Avenue

Edenvale,

Johannesburg, 1609

South Africa

Postal Address: P O Box 67308,

Bryanston,2021.

Tel: +27 11 452 0612

Fax: +27 11 609 3987

Email: info@waterloo-bathrooms.com

Website: www.waterloo-bathrooms.com

VAT No: 4660265481

Registration: 2012/146248/07

Thank you