windows multipoint server 2011 - planning guide

8/17/2019 Windows MultiPoint Server 2011 - Planning Guide

1/28

Windows MultiPoint Server 2011Planning Guide

Document Version 1.0

March 2011


2/28

Copyright NoticeThis document is provided “as-is”. Information and views expressed in this document, including

URL and other Internet web site references, may change without notice. You bear the risk of

using it.Some examples depicted herein are provided for illustration only and are fictitious. No real

association or connection is intended or should be inferred.

This document does not provide you with any legal rights to any intellectual property in any

Microsoft product. You may copy and use this document for your internal, reference purposes.

You may modify this document for your internal, reference purposes.

© 2011 Microsoft Corporation. All rights reserved.

Microsoft, Windows, and MultiPoint Server are trademarks of the Microsoft group of companies.

All other trademarks are property of their respective owners.


3/28

ContentsCopyright Notice .......................................................................................................................... 2

Contents ...................................................................................................................................... 3

Introducing MultiPoint Server.......................................................................................................... 4

Selecting Hardware for your MultiPoint Server system ................................................................... 5

Selecting a Host Computer for a MultiPoint Server System ........................................................ 6

Selecting a CPU .......................................................................................................................... 6

Selecting Hardware Components to Build Your MultiPoint Server System ................................. 6

Hardware Requirements and Performance Recommendations.................................................... 10

Optimize MultiPoint Server System Performance ..................................................................... 10

Capacity Planning for MultiPoint Server ....................................................................................... 12

MultiPoint Server Site Planning .................................................................................................... 13

Suggested MultiPoint Server System Layouts .......................................................................... 14

MultiPoint Server Virtualization Support .................................................................................... 17

Microsoft RemoteFX ................................................................................................................. 17

MultiPoint Server Stations ............................................................................................................ 17

Direct Video Connected Stations .............................................................................................. 18

USB Connected Stations........................................................................................................... 19

LAN Connected Stations ........................................................................................................... 20

Network Considerations and User Accounts ................................................................................ 21

Single MultiPoint Server System with Local User Accounts ...................................................... 22

Multiple MultiPoint Server Systems with Local User Accounts .................................................. 22

Multiple MultiPoint Server Systems with Domain Accounts....................................................... 23

Storing Files with MultiPoint Server .............................................................................................. 23

Pre-Deployment Checklist ............................................................................................................ 24

Glossary ....................................................................................................................................... 25


4/28

Windows MultiPoint Server 2011 Planning Guide

4

Introducing MultiPoint Server

Welcome to the Planning Guide for Windows® MultiPoint™ Server 2011 Standard and

Windows® MultiPoint™ Server 2011 Premium. Unless otherwise noted, all references to

MultiPoint Server refer to both versions.

To download this document, see the Windows MultiPoint Server 2011 Server Planning Guide

(http://go.microsoft.com/fwlink/?LinkId=211307).

MultiPoint Server enables multiple stations (terms shown in italics are defined in the Glossary) to

be connected to one computer. Multiple users can then share the computer at the same time.

There are three ways stations can connect to the computer running MultiPoint Server: directly to

video ports on the computer, via USB hubs, and over the local area network (LAN). Each of these

is described more fully in the MultiPoint Server Stations section below.

USB connected stations consist of a station hub, monitor, keyboard, and mouse. MultiPoint

Server includes the MultiPoint Manager application, which helps you, as an administrative user ,

to monitor and manage MultiPoint Server stations.

This document addresses factors to be considered when planning to deploy Windows®

MultiPoint™ Server 2011 Standard or Windows® MultiPoint™ Server 2011 Premium.

The considerations addressed in this document include the following:

Hardware Requirements and Performance Recommendations

What hardware is required to install the MultiPoint Server operating system?

Selecting Hardware for your MultiPoint Server system

What hardware decisions should you make?Capacity Planning for MultiPoint Server

How many computers running MultiPoint Server and stations will be required?

Site Planning

Where will the computer(s) running MultiPoint Server and their stations be located, and how

will they be configured?

MultiPoint Server Stations

What system components will be required, and what other components might be used?

Network Considerations and User Accounts

The networking environment into which the MultiPoint Server system is deployed can affect

how user accounts are managed. What is your networking environment? How will user

accounts and files be managed?

Storing Files with MultiPoint Server

Where will user files be stored, and how will they be accessed?

Pre-Deployment Checklist

http://go.microsoft.com/fwlink/?LinkId=211307http://go.microsoft.com/fwlink/?LinkId=211307http://go.microsoft.com/fwlink/?LinkId=211307http://go.microsoft.com/fwlink/?LinkId=211307


5/28


5

For more detail about each of these areas of consideration, see the specified section.

Selecting Hardware for your MultiPointServer system

When you build a MultiPoint Server system, you should select a computer that meets the system

requirements for a computer in a MultiPoint Server system. If you are deciding which components

to select, keep the following considerations in mind:

The target price range of your complete solution.

The types of usage scenarios your customer might expect for the MultiPoint Server

system, such as whether the users are running multimedia programs, using word

processing or productivity programs, or browsing the Internet, which have larger

processing demands. The number of users who could be using the system at the same time. If you plan to have

many users on your system at the same time, or users who use system-intensive

programs, you should plan for more computing power for your system.

The purchasing and support arrangements that your organization has with hardware

providers, if applicable.

A MultiPoint Server system would typically include the following components:

One computer that is running MultiPoint Server, which includes RAM, hard disk drives,

and video cards.

A monitor, station hub, keyboard, and mouse for each station.

Optional peripheral devices for the MultiPoint Server station, including speakers,

headphones, or microphones that are available to the user of the station.

Optional peripheral devices that are available to all users of the MultiPoint Server system,

including printers, external hard disk drives, USB storage devices.

The following sections in this document provide detailed information about each of the following

hardware decisions that you can make, including the following:

Selecting a host computer for a MultiPoint Server system, as described in the Selecting a

Host Computer for a MultiPoint Server System section.

Selecting a CPU for a MultiPoint Server system, as described in the Selecting a CPU

section.

Selecting individual hardware components for a MultiPoint Server system, as described

in the Selecting Hardware Components to Build Your MultiPoint Server System section.

There are some hardware components that might require additional configuration if you choose to

use them. These devices and the configuration requirements are described in the Special

Hardware Configuration Requirements section.


6/28


6

Selecting a Host Computer for a MultiPoint ServerSystem

Please contact your preferred computer solution vendor for information about MultiPoint Server-based solutions that meet the system requirements for a computer that is running MultiPoint

Server. See the Selecting a CPU section for more information about how to select a CPU that can

handle your processing requirements.

You can then select the hardware components that you want to use with your MultiPoint Server

system, as described in the Selecting Hardware Components to Build Your MultiPoint Server

System section.

Selecting a CPU A MultiPoint Server system is a multiple-user environment, with all users connected to a single

host computer. This increases the CPU usage because all users share the same computer.Some tasks, such as multimedia programs (for example, Adobe Flash Player or video-editing

software), have larger processing demands. Therefore, make sure to select a CPU that can

handle the processing requirements for the number of users and types of user scenarios that it

will need to support.

There are 2 types of processors that have been tested on a MultiPoint Server system:

Dual-core processor: This type of processor can support up to four stations that are being

used with high processing demand programs, such as multimedia programs.

Quad-core processor: This type of processor can support up to six stations that are being

used with high processing demand programs, such as multimedia programs.

MultiPoint Server requires an x64-based CPU, and must meet the system requirements for thecomputer as described in the Hardware Requirements and Performance Recommendations

section in this document.

With this information, select a CPU that meets the processing requirements for your MultiPoint

Server system.

Selecting Hardware Components to Build YourMultiPoint Server SystemIf you plan to select individual components to build your MultiPoint Server system, there are

several things to consider when you are making your selection: The types of programs that you plan to install, such as multimedia programs or word

processing programs. Some programs require more resources to run on the system.

The number of users who could be using the system at the same time.

The different components discussed in this section include the following:

Video hardware


7/28


7

MultiPoint Server station hardware, such as the following:

o USB hubs

o Multifunction hubs

o Keyboards and mouse devices

o Monitors

Other peripheral devices, such as the following:

o Audio peripheral devices, such as speakers and headphones

o Microphones

o USB mass storage devices

o Web cameras

When you have selected the hardware components for your MultiPoint Server system, make sure

that you obtain current, updated drivers for the components to make sure that they work correctly

when they are connected to the MultiPoint Server system.The following sections provide more detailed information to help you select the different

components for your MultiPoint Server system.

Selecting Video Hardware

The video hardware that you select should support the number of monitors that you will require

for the number of users you intend to have working at MultiPoint Server stations. In addition,

different types of video hardware can provide a higher-performance solution for graphics-

intensive programs, such as multimedia content.

Video hardware options include the following:

Internal video cards that use PCI or PCIe

External video controllers connected by USB

Select the video hardware that can support the maximum number of monitors for the type of

performance that your MultiPoint Server system requires. Make sure that you validate the

performance of the video hardware that you choose to ensure that it meets your performance

requirements.

You must install a video driver that supports extending your desktop across multiple monitors.

The following sections describe the capabilities of each of these video hardware types.

Internal Video Cards

An internal video card is plugged into the motherboard on the computer. The internal video card

is a solution that can help the performance of graphics-intensive multimedia programs. However,

an internal video card requires an available PCI or PCIe slot to plug into the motherboard. Many

high-performance video cards require a PCIe slot, but there are a limited number of PCIe slots on

a motherboard. You should know what kind of video card slots are available on your computer so

Note


8/28


8

that you can purchase the correct type of video cards for your computer. Because the video card

typically supports a maximum of two monitors, this limits the number of monitors that can be

connected.

When you are selecting internal graphics cards, select video cards that support the number ofmonitors that you need to plug in. The maximum number of monitors that can be supported is

equal to the number of internal video cards that are plugged into the motherboard multiplied by

the number of monitor outputs on each of those video cards. For example, if you had two internal

video cards and each card had two monitor outputs, you could support up to four monitors.

The connections on the motherboard that you select should match the connections on the video

card. A PCI-Express 2.0 x8 or x16 standard video card can provide better performance for

multimedia programs.

External Video Controllers

An external video controller is typically packaged as a USB hub or multifunction hub that contains

a video controller. The USB hub or multifunction hub might also include connections for

headphones, speakers, a microphone, or other peripheral devices.

Select an external video controller if you want to enable support for additional monitors without

opening the computer, or if you want to support more stations than fit into the motherboard. For

example, if you previously had four monitors plugged into internal video cards, and you want to

add two more monitors, you can plug two external video controllers into the computer and have

room for two more monitors. In this manner, you can combine a USB hub or multifunction hub

with the video controller and not use additional PCI or PCIe slots on the motherboard.

In summary, you can combine internal video cards and external video controllers to create the

system that you want.

Selecting MultiPoint Server Station Devices

A MultiPoint Server station consists of a station hub with a keyboard and mouse plugged into the

hub, and a monitor that is either plugged into the host computer, or into the hub if it contains a

video output. Other peripheral devices can be plugged into the station hub, but are not required to

create a MultiPoint Server station. These other peripheral devices are described in the Selecting

Other Station Peripheral Devices section.

The devices that you select to create a MultiPoint Server station should meet minimum

requirements in order to work with MultiPoint Server. Details about the requirements for the

following MultiPoint Server station devices are provided in this section:

USB hubs

Multifunction hubs

Keyboards and mice

Monitors


9/28


9

Selecting USB Hubs

The USB hub used as a station hub in a MultiPoint Server system can be a generic multiport USB

expansion hub that conforms to the Universal Serial Bus (USB) 2.0, or later, specification. Such

hubs typically have two, four, or more USB ports and allow multiple USB devices to be connectedto a single USB port on the computer. The USB hub can be externally powered or unpowered.

The USB hubs that you use to connect your peripheral devices into the MultiPoint Server station

should meet the following requirements:

They should support USB 2.0.

There should be one USB hub for each MultiPoint Server station.

An additional consideration is the use of a powered hub, instead of a non-powered hub. With a

non-powered hub, the amount of current provided by the host computer must be sufficient to

provide power to all peripheral devices plugged into the hub without degrading system

performance. A powered hub allows you to connect more peripheral devices and provide

sufficient power to all of them.

Selecting Multifunction Hubs

A multifunction hub is an expansion hub that plugs into a USB port on the computer, and enables

the connection of a variety of both USB and non-USB devices to the hub, depending on the

device. Multifunction hubs are produced by specific hardware manufacturers and may require the

installation of a device-specific driver.

If you use a multifunction hub to connect your peripheral devices into the MultiPoint Server

station, there should be one multifunction hub for each MultiPoint Server station.

Multifunction hubs frequently contain a video output that you can use to maximize the number of

stations that you can provide. For more information using these station hubs with a video output,see the Selecting Video Hardware section in this document.

Selecting Keyboards and Mouse Devices

The keyboards and mouse devices that you provide and plug into the MultiPoint Server station

should use a USB to connect to the station hub, unless the station hub provides PS2 ports. In that

case, the keyboards and mouse devices should use PS2 to connect to the station hub.

A minimum of one keyboard and one mouse is recommended for a MultiPoint Server station.

Selecting Monitors

There should be one monitor provided for each MultiPoint Server station. Monitors are eitherplugged into the video card on the host computer, or they are plugged into the station hub, if it

contains a video output.

The display size of the monitor can impact the performance of your MultiPoint Server system. We

recommend a display size of 1280 × 1024 or similar.


10/28


10

Selecting Other Station Peripheral Devices

A USB hub or multifunction hub can support keyboards, mouse devices, and audio devices on a

single station, and can also support other peripheral devices that are available to all users on the

MultiPoint Server system.We recommend that the following peripheral devices plug into the station by using USB to

connect to the station hub in order to work correctly with MultiPoint Server:

Audio peripheral devices such as speakers and headphones

Microphones

USB mass storage devices, such as USB flash drives, external hard disk drives, and

digital cameras that provide access to photo storage as a mass storage device

Web cameras that include both image acquisition and audio input

Special Hardware Configuration Requirements

Some hardware components require additional configuration after you install MultiPoint Server, if

you choose to use them. These hardware components and their configuration requirements are

described in the following sections.

Enable Wireless NICs

A wireless network interface card (NIC) is disabled by default in MultiPoint Server. If you choose

to install a wireless NIC in the computer running MultiPoint Server, you must install and, if

necessary, enable the Wireless Local Area Network (LAN) service to allow the wireless NIC to

work in your computer running MultiPoint Server. For information about installing and enabling

the Wireless LAN service, see the TechNet article at

http://go.microsoft.com/fwlink/?LinkId=182906.

Hardware Requirements and PerformanceRecommendations

This topic describes the hardware required to install the MultiPoint Server operating system and

how MultiPoint Servers are directly affected by the capability of the CPU, the amount of RAM,

and the amount of available bandwidth.

Optimize MultiPoint Server System PerformanceThe performance of your MultiPoint Server system will be directly affected by the capability of the

CPU and GPU and the amount of RAM available on the computer that is running MultiPoint

Server. For remote stations, the network bandwidth and the capability of the thin client is

important, particularly if video is running in the user’s session. The types of software and the

Internet content accessed will also affect the system’s performance. For example, if a computer

http://go.microsoft.com/fwlink/?LinkId=182906http://go.microsoft.com/fwlink/?LinkId=182906http://go.microsoft.com/fwlink/?LinkId=182906


11/28


11

that is running MultiPoint Server is used to run productivity software, such as word processing,

spreadsheet, and e-mail, or to access Web sites that do not require full-motion videos, more

stations can be connected without a significant effect on performance. However, if the computer

that is running MultiPoint Server is used to access multimedia content or Web pages that use full-

motion videos, fewer stations can be connected before affecting performance.

To achieve good performance with your MultiPoint Server system under various loads, use the

guidelines in the following table when you are planning and testing your system:

Table 1: Minimum recommended hardware.

Application

scenario

Up to 4

stations

5-6

stations

7-10

stations

11-14

stations

15-20

stations

Productivity

Office, Web

browsing, line-of-business

applications

CPU: 2C1

RAM: 2GB

CPU: 2C

RAM: 4GB

CPU: 4C1

RAM: 6GB

CPU: 4C

RAM: 8GB

CPU: 4C+MT or

6C1

RAM: 8 GB

Mixed

Productivity plus:

Occasional video

use by some

users

CPU: 2C

RAM: 2GB

CPU: 2C

RAM: 4GB

CPU: 4C

RAM: 6GB

CPU: 4C+MT

or 6C1

RAM: 8GB

CPU: 4C+MT or

6C

RAM: 8 GB

Video intensive2

Productivity plus:

Frequent video

use by all users

CPU: 2C

RAM: 2GB

CPU: 4C

RAM: 4GB

CPU:

4C+MT or

6C

RAM: 6GB

CPU: 4C+MT

or 6C

RAM: 8GB

CPU: 4C+MT or

8C

RAM: 8 GB

Thin Client:

RemoteFX3

USB video not

recommended

1 2C = 2 cores, 4C = 4 cores, 6C = 6 cores, MT = Multi-threading. Processor speed

should be at least 2.0 gigahertz (GHz).

2

Video testing was performed using 360p H.264 video at its native resolution.3 RemoteFX, or equivalent technology for RDP, is required when 15 – 20 remotely

connected thin clients running full motion video within their session. For more information

about hardware requirements for RemoteFX, see Hardware Considerations for

RemoteFX (http://go.microsoft.com/fwlink/?LinkId=211310).

Notes

Note

http://localhost/var/www/apps/conversion/tmp/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/Content.Outlook/F4W1GGD4/Hardware%20Considerations%20for%20RemoteFXhttp://localhost/var/www/apps/conversion/tmp/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/Content.Outlook/F4W1GGD4/Hardware%20Considerations%20for%20RemoteFXhttp://localhost/var/www/apps/conversion/tmp/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/Content.Outlook/F4W1GGD4/Hardware%20Considerations%20for%20RemoteFXhttp://localhost/var/www/apps/conversion/tmp/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/Content.Outlook/F4W1GGD4/Hardware%20Considerations%20for%20RemoteFXhttp://localhost/var/www/apps/conversion/tmp/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/Content.Outlook/F4W1GGD4/Hardware%20Considerations%20for%20RemoteFXhttp://localhost/var/www/apps/conversion/tmp/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/Content.Outlook/F4W1GGD4/Hardware%20Considerations%20for%20RemoteFX


12/28


12

These are the basic requirements for MultiPoint Server. Actual requirements will vary

based on your system configuration, the programs and features that you decide to install,

the number of users and how the system is used.

The actual configuration sizing depends on the workload you are running and the hardware

capability. You should always validate the sizing using your own applications and hardware.

For more information about choosing the best MultiPoint Server hardware for your needs, contact

your hardware vendor.

Capacity Planning for MultiPoint Server

Before you deploy Windows MultiPoint Server 2011, consider the number of individual stations

and servers you will require. The capacity requirements of a given computer that is running

MultiPoint Server will have a direct impact on all aspects of the deployment, from general room

layout to cabling and power requirements. Consider the following factors:

Number of users who will access the system at the same time

Software applications and content, such as streaming video from the Internet, that will be

used

Files with which users will work

Network usage

Site planning

Number of Users, Stations, and Computers running MultiPointServer

The number of stations you will need depends on the number of people who will have to access

the computer running MultiPoint Server at the same time. Similarly, the number of computers

running MultiPoint Server you will need depends on the total number of stations required. A single

computer running Windows MultiPoint Server 2011 Standard can support one primary station and

up to 10 standard stations. A single computer running Windows MultiPoint Server 2011 Premium

can support one primary station and up to 20 standard stations.

Any MultiPoint Server station monitor that has a resolution greater than 1024x768 can be split

into two station screens using the split screen task on the Stations tab in MultiPoint Manager. The

screen that is present on the monitor at the time that the split occurs moves to the left half of themonitor, and a new station’s screen is created on the right half of the same monitor. The new

station screen must be mapped to a keyboard, mouse, and USB hub to complete the creation of

the new station. After a station is split, one user can log on to the left station while another user

logs on to the right station.

New in Windows MultiPoint Server 2011 is the ability to connect from client machines (desktop

PCs, laptops, thin clients, etc.) using Remote Desktop Protocol (RDP) via a local area network


13/28


13

(LAN). For capacity planning purposes, RDP connections are equivalent to standard station

connections. We will examine the differences between these two connection methods in the

MultiPoint Server Stations section below.

MultiPoint Server Site Planning

The location where one or more computers running MultiPoint Server and its associated stations

will be deployed can have a significant impact on the quality of the users’ experience and the

relative ease of configuring and managing the MultiPoint Server system.

A unique station hub is required for each USB 2.0 connected standard station. And each

MultiPoint Server supports only one level of intermediate hubs between the computer and station

hubs. The maximum distance from the server to a station hub is 10 meters. If longer distances

are required, powered USB extenders can be used between hubs. Alternatively, rich or thin client

computers can be used to connect to the computer running MultiPoint Server via the local areanetwork (LAN).

The computer running MultiPoint Server should have convenient access to a power supply and to

any peripheral devices that are connected directly to it, such as a printer. Additionally, the

computer running MultiPoint Server must have convenient access to a network connection. A

network connection is required for accessing both the Internet and, where available, a LAN.

Additional factors to consider include the following:

Will the MultiPoint Server system be set up in a specific room? Or, will it be set up on a

rolling cart or table, so that it can be moved from place to place?

If you plan this kind of mobile setup, you can associate the stations with MultiPoint

Server every time you reconnect them to make sure that each keyboard and mouse

is associated with the appropriate monitor.

Will the primary station be located next to the other stations, or will it be separate? For

example, if the MultiPoint Server system is set up in a classroom, will the primary station

be on the teacher’s desk; whereas, the standard stations will be positioned elsewhere in

the room?

How many stations will fit in the room?

Are there enough network connections in the room to support the required number of

computers running MultiPoint Server?

Where are the power outlets located?

Will you need an additional display device, such as a projector? If you plan to use a

projector, will it hang from the ceiling, or will it be positioned on a table?

What kind of cables will be required, and how many will be needed?

Note


14/28


14

Suggested MultiPoint Server System LayoutsDepending on the available furniture, the size of the room, and the number of computers running

MultiPoint Server and stations in the room, there are a variety of ways that the physical stations

can be arranged. The following diagrams illustrate five possible alternatives.

Some of these diagrams show a projector connected to the MultiPoint Server system.

This is only an example; including a projector in a MultiPoint Server system is optional.

Computer Lab. In this setup, the stations are arranged around the walls of the room, with the

students facing the walls.

Groups. In this setup, there are three computers running MultiPoint Server with stations clustered

around each of the computers.

Note


15/28


15

Lecture Room. In this setup, the stations are set up in rows. An advantage of this setup is that all

of the students face the instructor.


16/28


16

Activity Center. This setup consists of a traditional lecture-room layout for the desks and a single

computer running MultiPoint Server and its associated stations.

Small Business Office. In this setup, the computer running MultiPoint Server is placed in a

central location and users throughout the office connect using Remote Desktop Protocol (RDP)

sessions via a local area network (LAN).


17/28


17

MultiPoint Server Virtualization SupportMultiPoint Server Premium supports Microsoft Hyper-V virtualization in two ways. MultiPoint

Server Premium can be deployed as a guest operating system running on a Hyper-V host server.

When running MultiPoint Server in a virtual machine, only Remote Desktop (RDP) connections

are supported, and not USB connected stations (see the following section for more information on

stations).

Alternatively, the Premium edition can itself be a Hyper-V host used to run virtual machines. For

more information about Microsoft virtualization, see Hyper-V in Windows Server 2008 and

Windows Server 2008 R2 (http://go.microsoft.com/fwlink/?LinkId=211308).

MultiPoint Server Standard does not support virtualization as a host or guest operation

system.

Microsoft RemoteFXMultiPoint Server takes advantage of Microsoft RemoteFX™, a new feature included in Windows

Server 2008 R2 with Service Pack 1 (SP1). It introduces a set of end-user experience

enhancements for Remote Desktop Protocol (RDP) that enable a rich desktop environment within

your network environment.

Microsoft RemoteFX enables the delivery of a full Windows user experience to a range of client

devices including rich clients, thin clients, and ultrathin clients. RemoteFX delivers a rich user

experience in a MultiPoint Server environment by providing improved codec support that assists

in the delivery of high-definition multimedia content. RemoteFX is integrated with the RDP

protocol, which enables shared encryption, authentication, management, and device support.

New functionality provided by RemoteFX in Windows MultiPoint Server 2011 includes an

improved encode/decode pipeline which provides:

Ultrathin client support

Richer user experience

Increased host scale

For more information on RemoteFX, see Microsoft RemoteFX

(http://go.microsoft.com/fwlink/?LinkId=211309).

MultiPoint Server StationsIn a MultiPoint Server system environment, stations are the user endpoints for connecting to the

computer running MultiPoint Server. Three station types are supported: direct video connections,

USB connections, and LAN connections for rich or thin client machines. For direct video and USB

connections, a station is a collection of hardware that consists of the following components:

USB or multifunction station hub

Note

http://go.microsoft.com/fwlink/?LinkId=211308http://go.microsoft.com/fwlink/?LinkId=211308http://go.microsoft.com/fwlink/?LinkId=211308http://go.microsoft.com/fwlink/?LinkId=211308http://go.microsoft.com/fwlink/?LinkId=211308http://go.microsoft.com/fwlink/?LinkId=211308http://go.microsoft.com/fwlink/?LinkId=211309http://go.microsoft.com/fwlink/?LinkId=211309http://go.microsoft.com/fwlink/?LinkId=211309http://go.microsoft.com/fwlink/?LinkId=211309http://go.microsoft.com/fwlink/?LinkId=211308http://go.microsoft.com/fwlink/?LinkId=211308http://go.microsoft.com/fwlink/?LinkId=211308


18/28


18

Monitor

Keyboard

Mouse

Other peripheral devices, such as speakers, headphones, or USB flash drives may also beconnected to a station hub.

For rich client machines (desktop PCs, laptops), as well as thin clients and ultrathin clients, the

station hardware is the machine itself and other peripheral devices that are attached to it.

Additionally, there are two types of stations, primary and standard stations.

Primary and Standard Stations

Both the primary station and the standard stations are usually defined immediately after you

install MultiPoint Server. Every MultiPoint Server system must have a primary station and one or

more standard stations. The primary station is the one which displays the startup process when

the computer is turned on. The monitor of the primary station must be connected directly to avideo port on the computer that is running MultiPoint Server, for example, by a DVI or VGA cable.

In contrast, standard stations can have monitors connected directly to the video ports on the

computer, can be connected through USB video devices, or can be rich or thin clients connected

via the LAN.

Direct Video Connected StationsThe computer running MultiPoint Server can contain multiple video cards, each of which can have

one or more video ports. This allows monitors for multiple stations to be plugged directly into the

computer. Keyboards and mice are then connected via USB hubs or directly to the computer and

are associated with each monitor using the MultiPoint Manager console.


19/28


19

MultiPoint Server system with direct video connections

USB Connected Stations A station hub is a hardware device that can be used to connect peripheral devices to a computer

in a MultiPoint Server system. Both USB hubs and multifunction hubs can be used as station

hubs.

A USB hub in this context is a generic multiport USB expansion hub that complies with the

universal serial bus (USB) specifications. Such hubs typically have two, four, or more USB ports

that enable multiple USB devices to be connected to a single USB port on the computer. USB

hubs are typically separate devices that may be externally powered or unpowered. Some other

devices, such as some keyboards and video monitors, may also incorporate a USB hub into their

design.

Only USB 2.0-compliant hubs are supported by MultiPoint Server.

A multifunction hub is an expansion hub that connects to the computer via a USB port and

enables the connection of a variety of non-USB devices to the hub. Multifunction USB hubs must

be USB 2.0-compliant.

The following diagram shows a MultiPoint Server system with a primary station and two additionalstations. In this diagram, the monitor of the primary station is connected directly to the MultiPoint

Server computer by a DVI cable, and the monitors, keyboards, and mice of the standard stations

are connected to multifunction USB hubs.

Note


20/28


20

MultiPoint Server system with USB multifunction hub connections

Additional Information about USB Devices

With the exception of station hubs, MultiPoint Server will support any USB 2.0 device connected

either to a station hub or directly to the computer. Most of these devices, such as a printer,

camera, and so on, will be available from any station. However, when any of the following USB

devices is connected to a station hub, it will automatically be associated with that particular

station:

Keyboards

Mice

Speakers

Headphones

USB flash drives

LAN Connected StationsThin clients, ultrathin clients, and traditional desktop and laptop PCs can connect to the computer

running MultiPoint Server using Remote Desktop Protocol (RDP) via the local area network

(LAN). RDP connections provide an end user experience that is very similar to using a monitor,

keyboard, and mouse connected directly to the computer running MultiPoint Server through a

station hub, but makes use of the local client machine’s own hardware.

Microsoft RemoteFX enabled clients and devices can provide a rich multimedia experience by

taking advantage of the processor and video hardware capabilities of the computer running

MultiPoint Server to deliver high-definition video.


21/28


21

From a deployment and administration perspective, there are some differences when using the

MultiPoint Manager console:

Not limited to physical USB connection distances

Potential to reuse older PC hardware as stations Easier to scale to a higher number of stations

No hardware trouble-shooting

No split-screen functionality

Fewer options for controlling the station

MultiPoint Server system with LAN connections

Network Considerations and User Accounts

MultiPoint Server can be deployed in a variety of network environments, and it can support both

local user accounts and domain user accounts. Generally, MultiPoint Server user accounts will be

managed in one of the following network environments:

A single computer running MultiPoint Server with its own local user accounts

Multiple computers running MultiPoint Server, each with its own local user accounts

Multiple computers running MultiPoint Server, using domain user accounts (this scenariois only available when using the Premium edition).

By definition, local user accounts can only be accessed from the computer on which they were

created. In contrast, Domain user accounts are user accounts that reside on a domain controller

and can be accessed from any computer connected to the domain. When deciding which type of

network environment to use, some things to consider include the following:

Will resources be shared among servers?


22/28


22

Will users access database servers which require authentication?

Will users access internal web servers which require authentication?

Is there an existing Active Directory domain infrastructure in place?

This section addresses user account management in these networking environments.

Single MultiPoint Server System with Local UserAccountsIn environments with a single computer running MultiPoint Server, there is no requirement to

have a network. However, in order to take advantage of Internet resources, the networking

requirements may be as basic as a router and a connection to an Internet service provider (ISP).

Network connections associated with a network adapter on MultiPoint Server are configured, by

default, to obtain an IP address and DNS server address automatically via DHCP. Internet routers

are typically configured as DHCP servers, providing private IP addresses to computers thatconnect to them on the internal network. Therefore, a single computer running MultiPoint Server

may be able to connect to the internal interface of the router, obtain automatic IP information, and

connect to the Internet, all without significant effort or configuration.

A common way to manage users in this kind of environment is to create a local user account for

each person who will access the system. Local user accounts are user accounts which are

created on a specific computer running MultiPoint Server. Anyone who has a user account on

that computer can log on to MultiPoint Server from any station associated with it. Local user

accounts can be created and managed from the MultiPoint Manager.

Multiple MultiPoint Server Systems with LocalUser AccountsGiven that local user accounts are only accessible from the computer on which they were

created, when you deploy multiple MultiPoint Server systems in an environment, you can manage

local user accounts in one of two ways: You can create user accounts for specific individuals on

specific computers running MultiPoint Server, or you can use MultiPoint Manager to create

accounts for every user on every computer running MultiPoint Server.

For example, if you plan to assign users to a specific computer running MultiPoint Server, you

might create four local user accounts on Computer A (user01, user02, user03, and user04) and

four local user accounts on Computer B (user05, user06, user07, and user08). However, whereas

users 01-04 can log on to Computer A from any station that is connected to it, they cannot log onto Computer B. The same is true for users 05-08, who would only be able to log on to Computer

B, but not Computer A. Depending on the specific deployment environment, this may be

acceptable or even desirable.

However, if every user must be able to log on to any of the computers running MultiPoint Server,

a local user account must be created for each user on each computer that is running MultiPoint

Server. Choosing to manage users in this manner introduces certain complexities. For example, if


23/28


23

user01 logs on to Computer A on Monday and saves a file in his or her Documents folder, and

then logs on to Computer B on Tuesday, he or she will not be able to access the file saved in the

Documents folder on Computer A the day before.

Note that creating local accounts for each user on every computer running MultiPoint Serverinvolves additional complications. For example, if a person has a user account on both Computer

A and Computer B, there is no way to automatically synchronize the passwords for each account.

This can result in users having difficulty logging on should the account password be changed on

one computer, but not on all of them. You can simplify user account management in this kind of

network environment by assigning each user to a single computer that is running MultiPoint

Server. This way, the user can log on to any of the stations that are associated with that computer

and always have access to his or her files.

Multiple MultiPoint Server Systems with Domain

AccountsDomain environments are common in large network environments that include multiple servers.

For example, you might join one or more computers running the Premium edition of MultiPoint

Server to a domain, and then use Microsoft® Active Directory® to manage user accounts that

can be accessed from any computer in the domain. This allows for individual domain user

account s to be created and accessed from any station in any MultiPoint Server system which is

joined to the domain. Note that only the Premium edition of MultiPoint Server supports joining a

domain; the Standard edition of MultiPoint Server cannot join a domain.

When deploying MultiPoint Server in a domain environment, there are several factors to consider:

If domain accounts are used, they cannot be managed from MultiPoint Manager.

By default, MultiPoint Server is configured to give users permission to log on to only onestation at a time. If you decide to allow users to log on to multiple stations at the same

time using a single account, you can use the Edit Server Settings option in MultiPoint

Manager.

The location of domain controllers may affect the speed and reliability with which users

will be able to authenticate with the domain and locate resources.

Storing Files with MultiPoint Server

MultiPoint Server supports storing user files in the following ways:

On the operating system partition of the hard disk drive. By default, MultiPoint Server

stores user files on the hard disk drive, alongside the operating system.

On a separate partition of the hard disk drive. When the MultiPoint Server system is

set up for the first time, you can partition the hard disk drive. That is, you can configure a

section of the drive so that it functions as if it were a separate drive. This makes it easier

to restore or upgrade the operating system without affecting user files. For more


24/28


24

information about how to partition a drive, see the TechNet article, “Creating a partition or

logical drive” at http://go.microsoft.com/fwlink/?LinkId=182618.

On an additional internal or external hard disk drive. You can attach additional

internal or external hard disk drives to MultiPoint Server. On a shared network folder. To make user files available from any station, create a

shared folder on the network. Note that this requires another computer or server in

addition to the computer running MultiPoint Server. This is the recommended method for

storing files if there is a file server available.

Pre-Deployment Checklist

Use the following checklist to help you start to plan your MultiPoint Server deployment.

Step Issue Help topic

1. Determine the number of users who are likely to

access, at the same time, each computer that is

running MultiPoint Server, and the number of

required computers that must run MultiPoint Server.

Capacity Planning for MultiPoint

Server

2. Determine where your MultiPoint Server will be

located. Will it be set up in a single room, or will it be

set up so that it can be moved from one location to

another.

Site Planning

3. Determine how the stations will be arranged. Site Planning

4. Verify proper power and network infrastructure. Site Planning

5. Understand the software applications and the web

content that will likely be accessed, and the impact

they will have on system performance and security.

Capacity Planning for MultiPoint

Server

6. Determine the number and type of stations that will

be connected to the system.

MultiPoint Server Stations

7. Analyze the network environment. Network Considerations and

User Accounts

8. Determine how user accounts will be implemented

and managed.

Network Considerations and

User Accounts

9. Determine how user files will be shared and stored. Network Considerations and

User Accounts


25/28


25

Glossary

associate a station

To specify which monitor is used with which station and peripheral devices, such as a

keyboard and mouse. This can be done by pressing a specified key on the station’s

keyboard when prompted to do so.

domain

A collection of computers in a networked environment that share a common database,

directory database, or tree. A domain is administered as a unit with common rules and

procedures, which can include security policies, and each domain has a unique name.

domain user account A user account that is hosted on a domain controller. Domain user accounts can be

accessed from any computer that is connected to the domain and they are not tied to

any particular computer. See also, domain.

dual-core processor

A processing system composed of two independent CPUs integrated onto a single chip.

local user account

A user account on a specific computer. A local user account is available only on the

computer where the local account is defined.

multi-core processor

A processing system composed of two or more independent CPUs integrated onto a single chip.

multi-function hub

An expansion hub that connects to the computer via a USB port and enables the

connection of a variety of non-USB devices to the hub. Multi-function hubs are

produced by specific hardware manufacturers and may require the installation of a

device-specific driver. Multi-function hubs generally support connecting a video monitordirectly to the hub (via VGA, DVI, DisplayPort, etc.), a mouse and keyboard (either PS/2

or USB) and optionally audio connections and extra USB ports. The hub itself connects

to the computer by USB, and can be powered or unpowered. See also, USB hubs.

The following diagram shows an example of setting up a station with a multi-function

hub:


26/28


26

MultiPoint Server

See Windows MultiPoint Server 2011 Standard and Windows MultiPoint Server 2011

Premium.

MultiPoint Server system

A collection of hardware and software that consists of one computer that is running

MultiPoint Server and at least one MultiPoint Server station.

The following illustration shows one example layout of a MultiPoint Server system:

This illustration shows four stations, but as many as 10 associated standard stations are

supported with the Standard edition and up to 20 for the Premium edition. Both editions

also support one additional primary station.

partition

A section of space on a physical disk that functions as if it were a separate disk.

primary station

The station that is the first to startup when the MultiPoint Server system is turned on

and used for administration. When not being used by the administrator, it can be used

as a normal station (it does not have to be reserved exclusively for administration). The

monitor of the primary station must always be connected directly to a video port the

computer that is running MultiPoint Server. See also: station.

quad-core processor


27/28


27

A processing system composed of four independent CPUs integrated onto a single chip.

socket

A receptacle on a PC motherboard into which a microprocessor is plugged. A socket-mounted

microprocessor, such as the Pentium, connects to the motherboard through numerous pins on

the underside.

standard station

In contrast to the primary station, which is used for administration, standard stations are

used by normal users to connect to and use the computer running MultiPoint Server.

See also: station.

station

User endpoint for connecting to the computer running MultiPoint Server. Three station

types are supported: direct video connections, USB connections, and LAN connections

for rich or thin client machines. For direct video and USB connections, a station consists

of a monitor, station hub, keyboard, mouse, and other peripheral devices that are

attached to that station hub. For more information about station hardware, see

MultiPoint Server Stations.

station hub

A hardware device that connects peripheral USB devices to a computer in a MultiPointServer system. A station hub is a required component of a station. See also: multi-

function hubs and USB hubs.

USB hub

A generic multiport USB expansion hub that complies with the universal serial bus

(USB) 2.0 or later specifications. Such hubs typically have two, four, or more USB ports

that allow for multiple USB devices to be connected to a single USB port on the

computer. USB hubs are typically separate devices that may be externally powered or

unpowered. Some other devices, such as some keyboards and video monitors, may

also incorporate a USB hub into their design. When used as a station hub withMultiPoint Server, we recommend that you use a maximum four-port hub. If you plan to

connect USB devices other than a keyboard and mouse to the hub, use an externally

powered hub for best performance. See also: multi-function hub.

The following illustration shows an example of setting up a station with a USB hub:


28/28


28

Windows MultiPoint Server 2011 Standard

A Windows product that enables multiple users to share one computer at the same

time. It gives each user an independent Windows computing experience. Also referred

to as MultiPoint Server.

Windows MultiPoint Server 2011 Premium

A Windows product, designed for use in training and academic settings, which enables

multiple users to share one computer at the same time. It gives each user an

independent Windows computing experience. Also referred to as MultiPoint Server.

wireless network interface card (NIC)

An expansion card or other device used to provide network access to a computer or other device, such asa printer.