Wintriss Solution for Hydraulic Presses

press setup and die protection made easy

Wintriss SmartPAC 2 Hydraulic

Wintriss Controls Group, LLC

100 Discovery Way, Unit 110

Acton, Massachusetts 01720 USA

Tel: 800-586-8324 Fax: 978-263-2491

www.wintriss.com

0000000 MCONovember 2010® 2010 Wintriss Controls Group, LLC

SmartPAC 2 Automation Control for Hydraulic Presses

You liked SmartPAC 2 for your mechanical presses—Now you can have it for your hydraulic presses!

SmartPAC 2 Hydraulic uses a magneto-strictive linear position sensor to monitor the ram position and saves unique bottom and

top return positions for each tool. The graphical user interface for die protection and programmable cams in the SmartPAC 2

for mechanical presses is maintained by dividing the downstroke from 0° to 180° and the upstroke from 180° to 360°.

•Large color display: 10.4” diagonal-more than three times the area of the original SmartPAC!

•Stores the top and bottom positions with each tool number

•ProCamPAC 8-channel (optional 15-channel) programmable cam (limit switch) module

•Global cams

•Powerful counting capabilities, including stroke, parts, batch presets and total hits-on-a-tool

•Saves settings for 200 tools

•Hot Keys: easier navigation—popular screens just one or two buttons away

•Help Key: just press the “Help” key for any screen

•Enhanced Error/Event Log: time stamped detailed information for 200 most recent errors/events

•Password security allows you to protect your settings — individual settings or all settings

•SmartView: press status from anywhere in the world

•Messaging: send messages to email and text-enabled beepers/cell-phones

•Easier Firmware Upgrades: no “chips” to change when you add new features

SmartPAC 2 Hydraulic: Options

•Return-on-Pressure saves the pressure setting and dwell for each tool

•DiProPAC 8-, 16-, or 32-sensor die protection modules prevents costly downtime, damage and die repairs by providing timely feedback, control and advance warning of potential problems

•Servofeed Interface (SFI) allows you to interface to popular brands of servofeed controls

•AutoSetPAC 2- or 4-point load analyzer monitors press tonnage and load conditions

• Info Center displays setup sheets at the press!

•PM Monitor tracks up to 64 maintenance items and alerts you when each is due

•Bilingual Menus (English/Spanish) run mode for Status and Adjust menus

•LETS Production Reporting Software automates the on-line collection of operating data from virtually every machine in your plant

SmartPAC 2 Hydraulic: Features