Slide 1

Staff wireless SSID configuration steps1. Right click on your wireless network icon and select open network and sharing center ..a page will appear like

2. Go to set up a new connection or network

3. Go to manually connect to wirless network4. Click Next

5. Fill the form like this

6. Click Next7. Go to change connection settings

8. Select security

9. Go to settings

10.Un check the box verify the server identity by validating the certificate

11. Then go to configuration at this page

12. Also un check this box

13. Then ok14. Again ok15. Go to Advanced settings

16. Thick the box with specify Authentication modelike below17. Select user Authentication18. Save credential

19. After saving the credential the following window will appear

20. Fill the form with the correct university email and password like below